WebSVN – Kolibri OS – Diff – /kernel/trunk/network/socket.inc


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                 ;;
;; Copyright (C) KolibriOS team 2004-2019. All rights reserved.    ;;
;; Distributed under terms of the GNU General Public License       ;;
;;                                                                 ;;
;;  Part of the TCP/IP network stack for KolibriOS                 ;;
;;                                                                 ;;
;;   Written by hidnplayr@kolibrios.org,                           ;;
;;     and Clevermouse.                                            ;;
;;                                                                 ;;
;;       Based on code by mike.dld                                 ;;
;;                                                                 ;;
;;         GNU GENERAL PUBLIC LICENSE                              ;;
;;          Version 2, June 1991                                   ;;
;;                                                                 ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
$Revision: 7679 $
 
struct  SOCKET
 
        NextPtr                 dd ?    ; pointer to next socket in list
        PrevPtr                 dd ?    ; pointer to previous socket in list
        Number                  dd ?    ; socket number
 
        mutex                   MUTEX
 
        PID                     dd ?    ; process ID
        TID                     dd ?    ; thread ID
        Domain                  dd ?    ; INET4/INET6/LOCAL/..
        Type                    dd ?    ; RAW/STREAM/DGRAM
        Protocol                dd ?    ; UDP/TCP/ARP/ICMP
        errorcode               dd ?
        device                  dd ?    ; device pointer, paired socket pointer if it's a local socket
 
        options                 dd ?
        state                   dd ?
        backlog                 dw ?    ; number of incoming connections that can be queued
 
        snd_proc                dd ?
        rcv_proc                dd ?
        connect_proc            dd ?
 
ends
 
struct  IP_SOCKET               SOCKET
 
        LocalIP                 rd 4    ; network byte order
        RemoteIP                rd 4    ; network byte order
        ttl                     db ?
                                rb 3    ; align
 
ends
 
struct  TCP_SOCKET              IP_SOCKET
 
        LocalPort               dw ?    ; network byte order
        RemotePort              dw ?    ; network byte order
 
        t_state                 dd ?    ; TCB state
        t_rxtshift              db ?
                                rb 3    ; align
        t_rxtcur                dd ?
        t_dupacks               dd ?
        t_maxseg                dd ?
        t_flags                 dd ?
 
;---------------
; RFC783 page 21
 
; send sequence
        SND_UNA                 dd ?    ; sequence number of unack'ed sent Packets
        SND_NXT                 dd ?    ; next send sequence number to use
        SND_UP                  dd ?    ; urgent pointer
        SND_WL1                 dd ?    ; the sequence number of the last segment used to update the send window
        SND_WL2                 dd ?    ; the acknowledgment number of the last segment used to update the send window
        ISS                     dd ?    ; initial send sequence number
        SND_WND                 dd ?    ; send window
 
; receive sequence
        RCV_WND                 dd ?    ; receive window
        RCV_NXT                 dd ?    ; next receive sequence number to use
        RCV_UP                  dd ?    ; urgent pointer
        IRS                     dd ?    ; initial receive sequence number
 
;---------------------
; Additional variables
 
; receive variables
        RCV_ADV                 dd ?
 
; retransmit variables
        SND_MAX                 dd ?
 
; congestion control
        SND_CWND                dd ?    ; congestion window
        SND_SSTHRESH            dd ?    ; slow start threshold
 
;----------------------
; Transmit timing stuff
        t_idle                  dd ?
        t_rtt                   dd ?    ; round trip time
        t_rtseq                 dd ?
        t_srtt                  dd ?    ; smoothed round trip time
        t_rttvar                dd ?
        t_rttmin                dd ?
        max_sndwnd              dd ?
 
;-----------------
; Out-of-band data
        t_oobflags              dd ?
        t_iobc                  dd ?
        t_softerror             dd ?
 
 
;---------
; RFC 1323                              ; the order of next 4 elements may not change
 
        SND_SCALE               db ?
        RCV_SCALE               db ?
        requested_s_scale       db ?
        request_r_scale         db ?
 
        ts_recent               dd ?    ; a copy of the most-recent valid timestamp from the other end
        ts_recent_age           dd ?
        last_ack_sent           dd ?
 
 
;-------
; Timers
        timer_flags             dd ?
        timer_retransmission    dd ?    ; rexmt
        timer_persist           dd ?
        timer_keepalive         dd ?    ; keepalive/syn timeout
        timer_timed_wait        dd ?    ; also used as 2msl timer
        timer_connect           dd ?
 
; extra
 
        ts_ecr                  dd ?    ; timestamp echo reply
        ts_val                  dd ?
 
        seg_next                dd ?    ; re-assembly queue
 
ends
 
struct  UDP_SOCKET              IP_SOCKET
 
        LocalPort               dw ?    ; in network byte order
        RemotePort              dw ?    ; in network byte order
 
ends
 
struct  RING_BUFFER
 
        mutex                   MUTEX
        start_ptr               dd ?    ; Pointer to start of buffer
        end_ptr                 dd ?    ; pointer to end of buffer
        read_ptr                dd ?    ; Read pointer
        write_ptr               dd ?    ; Write pointer
        size                    dd ?    ; Number of bytes buffered
 
ends
 
struct  STREAM_SOCKET           TCP_SOCKET
 
        rcv                     RING_BUFFER
        snd                     RING_BUFFER
 
ends
 
struct  socket_queue_entry
 
        data_ptr                dd ?
        data_size               dd ?
        buf_ptr                 dd ?
 
ends
 
struct  socket_options
 
        level                   dd ?
        optname                 dd ?
        optlen                  dd ?
        optval                  dd ?
 
ends
 
SOCKET_STRUCT_SIZE      = 4096          ; in bytes
 
SOCKET_QUEUE_SIZE       = 10            ; maximum number of incoming packets queued for 1 socket
; the incoming packet queue for sockets is placed in the socket struct itself, at this location from start
SOCKET_QUEUE_LOCATION   = (SOCKET_STRUCT_SIZE - SOCKET_QUEUE_SIZE*sizeof.socket_queue_entry - sizeof.queue)
 
uglobal
align 4
 
        net_sockets     rd 4
        last_socket_num dd ?
        last_UDP_port   dw ?            ; last used ephemeral port
        last_TCP_port   dw ?            ;
        socket_mutex    MUTEX
 
endg
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_init                                                     ;
;                                                                 ;
;-----------------------------------------------------------------;
macro   socket_init {
 
        xor     eax, eax
        mov     edi, net_sockets
        mov     ecx, 5
        rep stosd
 
       @@:
        pseudo_random eax
        cmp     ax, EPHEMERAL_PORT_MIN
        jb      @r
        cmp     ax, EPHEMERAL_PORT_MAX
        ja      @r
        xchg    al, ah
        mov     [last_UDP_port], ax
 
       @@:
        pseudo_random eax
        cmp     ax, EPHEMERAL_PORT_MIN
        jb      @r
        cmp     ax, EPHEMERAL_PORT_MAX
        ja      @r
        xchg    al, ah
        mov     [last_TCP_port], ax
 
        mov     ecx, socket_mutex
        call    mutex_init
 
}
 
;-----------------------------------------------------------------;
;                                                                 ;
; Sockets API (system function 75)                                ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
sys_socket:
 
        mov     dword[esp+20], 0        ; Set error code to 0
 
        cmp     ebx, 255
        jz      socket_debug
 
        cmp     ebx, .number
        ja      .error
        jmp     dword [.table + 4*ebx]
 
  .table:
        dd      socket_open             ; 0
        dd      socket_close            ; 1
        dd      socket_bind             ; 2
        dd      socket_listen           ; 3
        dd      socket_connect          ; 4
        dd      socket_accept           ; 5
        dd      socket_send             ; 6
        dd      socket_receive          ; 7
        dd      socket_set_opt          ; 8
        dd      socket_get_opt          ; 9
        dd      socket_pair             ; 10
  .number = ($ - .table) / 4 - 1
 
  .error:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EINVAL
 
        ret
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_open: Create a new socket.                               ;
;                                                                 ;
;   IN: ecx = domain                                              ;
;       edx = type                                                ;
;       esi = protocol                                            ;
;                                                                 ;
;  OUT: eax = socket number                                       ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_open:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_open: domain=%u type=%u protocol=%x ", ecx, edx, esi
 
        push    ecx edx esi
        call    socket_alloc
        pop     esi edx ecx
        test    eax, eax
        jz      .nobuffs
 
        mov     [esp+32], edi           ; return socketnumber
        DEBUGF  DEBUG_NETWORK_VERBOSE, "socknum=%u\n", edi
 
        test    edx, SO_NONBLOCK
        jz      @f
        or      [eax + SOCKET.options], SO_NONBLOCK
        and     edx, not SO_NONBLOCK
  @@:
 
        mov     [eax + SOCKET.Domain], ecx
        mov     [eax + SOCKET.Type], edx
        mov     [eax + SOCKET.Protocol], esi
        mov     [eax + SOCKET.connect_proc], connect_notsupp
 
        cmp     ecx, AF_INET4
        jne     .no_inet4
 
        mov     [eax + IP_SOCKET.ttl], 128
 
        cmp     edx, SOCK_DGRAM
        je      .udp
 
        cmp     edx, SOCK_STREAM
        je      .tcp
 
        cmp     edx, SOCK_RAW
        je      .raw
 
  .no_inet4:
        cmp     ecx, AF_PPP
        jne     .no_ppp
 
        cmp     esi, PPP_PROTO_ETHERNET
        je      .pppoe
 
  .no_ppp:
  .unsupported:
        push    eax
        call    socket_free
        pop     eax
        mov     dword[esp+20], EOPNOTSUPP
        mov     dword[esp+32], -1
        ret
 
  .nobuffs:
        mov     dword[esp+20], ENOBUFS
        mov     dword[esp+32], -1
        ret
 
  .raw:
        test    esi, esi        ; IP_PROTO_IP
        jz      .raw_ip
 
        cmp     esi, IP_PROTO_ICMP
        je      .raw_icmp
 
        jmp     .unsupported
 
align 4
  .udp:
        push    eax
        init_queue (eax + SOCKET_QUEUE_LOCATION)        ; Set up data receiving queue
        pop     eax
 
        mov     [eax + SOCKET.Protocol], IP_PROTO_UDP
        mov     [eax + SOCKET.snd_proc], socket_send_udp
        mov     [eax + SOCKET.rcv_proc], socket_receive_dgram
        mov     [eax + SOCKET.connect_proc], udp_connect
        ret
 
align 4
  .tcp:
        mov     [eax + SOCKET.Protocol], IP_PROTO_TCP
        mov     [eax + SOCKET.snd_proc], socket_send_tcp
        mov     [eax + SOCKET.rcv_proc], socket_receive_stream
        mov     [eax + SOCKET.connect_proc], tcp_connect
 
        tcp_init_socket eax
        ret
 
 
align 4
  .raw_ip:
        push    eax
        init_queue (eax + SOCKET_QUEUE_LOCATION)        ; Set up data receiving queue
        pop     eax
 
        mov     [eax + SOCKET.snd_proc], socket_send_ip
        mov     [eax + SOCKET.rcv_proc], socket_receive_dgram
        mov     [eax + SOCKET.connect_proc], ipv4_connect
        ret
 
 
align 4
  .raw_icmp:
        push    eax
        init_queue (eax + SOCKET_QUEUE_LOCATION)        ; Set up data receiving queue
        pop     eax
 
        mov     [eax + SOCKET.snd_proc], socket_send_icmp
        mov     [eax + SOCKET.rcv_proc], socket_receive_dgram
        mov     [eax + SOCKET.connect_proc], ipv4_connect
        ret
 
align 4
  .pppoe:
        push    eax
        init_queue (eax + SOCKET_QUEUE_LOCATION)        ; Set up data receiving queue
        pop     eax
 
        mov     [eax + SOCKET.snd_proc], socket_send_pppoe
        mov     [eax + SOCKET.rcv_proc], socket_receive_dgram
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_bind: Bind to a local port.                              ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = pointer to sockaddr struct                          ;
;       esi = length of sockaddr struct                           ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_bind:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_bind: socknum=%u sockaddr=%x length=%u\n", ecx, edx, esi
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        cmp     esi, 2
        jb      .invalid
 
        cmp     [eax + UDP_SOCKET.LocalPort], 0 ; Socket can only be bound once
        jnz     .invalid
 
        cmp     word[edx], AF_INET4
        je      .af_inet4
 
        cmp     word[edx], AF_LOCAL
        je      .af_local
 
  .notsupp:
        mov     dword[esp+20], EOPNOTSUPP
        mov     dword[esp+32], -1
        ret
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
  .af_local:
        ; TODO: write code here
        mov     dword[esp+32], 0
        ret
 
  .af_inet4:
        cmp     esi, 6
        jb      .invalid
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_UDP
        je      .udp
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_TCP
        je      .tcp
 
        jmp     .notsupp
 
  .tcp:
  .udp:
        pushd   [edx + 4]                       ; First, fill in the IP
        popd    [eax + IP_SOCKET.LocalIP]
 
        mov     bx, [edx + 2]                   ; Did caller specify a local port?
        test    bx, bx
        jnz     .just_check
        call    socket_find_port                ; Nope, find an ephemeral one
        jmp     .done
 
  .just_check:
        call    socket_check_port               ; Yes, check if it's still available
        jz      .addrinuse                      ; ZF is set by socket_check_port on error
 
  .done:
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_bind: local ip=%u.%u.%u.%u\n",\
        [eax + IP_SOCKET.LocalIP + 0]:1,[eax + IP_SOCKET.LocalIP + 1]:1,\
        [eax + IP_SOCKET.LocalIP + 2]:1,[eax + IP_SOCKET.LocalIP + 3]:1
 
        mov     dword[esp+32], 0
        ret
 
  .addrinuse:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EADDRINUSE
        ret
 
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_connect: Connect to the remote host.                     ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = pointer to sockaddr struct                          ;
;       esi = length of sockaddr struct                           ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_connect:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_connect: socknum=%u sockaddr=%x length=%u\n", ecx, edx, esi
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        cmp     esi, 8
        jb      .invalid
 
        cmp     [eax + SOCKET.state], SS_ISCONNECTING
        je      .already
 
        test    [eax + SOCKET.options], SO_ACCEPTCON
        jnz     .notsupp
 
        call    [eax + SOCKET.connect_proc]
 
        mov     dword[esp+20], ebx
        mov     dword[esp+32], eax
        ret
 
 
  .notsupp:
        mov     dword[esp+20], EOPNOTSUPP
        mov     dword[esp+32], -1
        ret
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
  .already:
        mov     dword[esp+20], EALREADY
        mov     dword[esp+32], -1
        ret
 
 
connect_notsupp:
        xor     eax, eax
        dec     eax
        mov     ebx, EOPNOTSUPP
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_listen: Listen for incoming connections.                 ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = backlog in edx                                      ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_listen:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_listen: socknum=%u backlog=%u\n", ecx, edx
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        cmp     [eax + SOCKET.Domain], AF_INET4
        jne     .notsupp
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_TCP
        jne     .invalid
 
        cmp     [eax + TCP_SOCKET.LocalPort], 0
        je      .already
 
        cmp     [eax + IP_SOCKET.LocalIP], 0
        jne     @f
        push    [IPv4_address + 4]           ;;; fixme!!!!
        pop     [eax + IP_SOCKET.LocalIP]
       @@:
 
        cmp     edx, MAX_backlog
        jbe     @f
        mov     edx, MAX_backlog
       @@:
 
        mov     [eax + SOCKET.backlog], dx
        or      [eax + SOCKET.options], SO_ACCEPTCON
        mov     [eax + TCP_SOCKET.t_state], TCPS_LISTEN
        mov     [eax + TCP_SOCKET.timer_keepalive], 0           ; disable keepalive timer
 
        push    eax
        init_queue (eax + SOCKET_QUEUE_LOCATION)                ; Set up sockets queue
        pop     eax
 
        mov     dword[esp+32], 0
        ret
 
  .notsupp:
        mov     dword[esp+20], EOPNOTSUPP
        mov     dword[esp+32], -1
        ret
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
  .already:
        mov     dword[esp+20], EALREADY
        mov     dword[esp+32], -1
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_accept: Accept an incoming connection.                   ;
;                                                                 ;
;   IN: ecx = socket number (of listening socket)                 ;
;       edx = ptr to sockaddr struct                              ;
;       esi = length of sockaddr struct                           ;
;                                                                 ;
;  OUT: eax = newly created socket num                            ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_accept:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_accept: socknum=%u sockaddr=%x length=%u\n", ecx, edx, esi
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        test    [eax + SOCKET.options], SO_ACCEPTCON
        jz      .invalid
 
        cmp     [eax + SOCKET.Domain], AF_INET4
        jne     .notsupp
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_TCP
        jne     .invalid
 
  .loop:
        get_from_queue (eax + SOCKET_QUEUE_LOCATION), MAX_backlog, 4, .block
 
; Ok, we got a socket ptr
        mov     eax, [esi]
 
; Verify that it is (still) a valid socket
        call    socket_check
        jz      .invalid
 
; Change sockets thread owner ID to that of the current thread
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx + TASKDATA.pid]
        mov     [eax + SOCKET.TID], ebx
 
; Return socket number to caller
        mov     eax, [eax + SOCKET.Number]
        mov     [esp+32], eax
        ret
 
  .block:
        test    [eax + SOCKET.options], SO_NONBLOCK
        jnz     .wouldblock
 
        call    socket_block
        jmp     .loop
 
  .wouldblock:
        mov     dword[esp+20], EWOULDBLOCK
        mov     dword[esp+32], -1
        ret
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
  .notsupp:
        mov     dword[esp+20], EOPNOTSUPP
        mov     dword[esp+32], -1
        ret
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_close: Close the socket (and connection).                ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_close:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_close: socknum=%u\n", ecx
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        mov     dword[esp+32], 0                                ; The socket exists, so we will succeed in closing it.
 
        or      [eax + SOCKET.options], SO_NONBLOCK             ; Mark the socket as non blocking, we dont want it to block any longer!
 
        test    [eax + SOCKET.state], SS_BLOCKED                ; Is the socket still in blocked state?
        jz      @f
        call    socket_notify                                   ; Unblock it.
  @@:
 
        cmp     [eax + SOCKET.Domain], AF_INET4
        jne     .free
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_TCP
        je      .tcp
 
  .free:
        call    socket_free
        ret
 
  .tcp:
        call    tcp_usrclosed
 
        test    eax, eax
        jz      @f
        call    tcp_output                                      ; If connection is not closed yet, send the FIN
  @@:
        ret
 
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_receive: Receive some data from the remote end.          ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = addr to application buffer                          ;
;       edx = length of application buffer                        ;
;       edi = flags                                               ;
;                                                                 ;
;  OUT: eax = number of bytes copied                              ;
;       eax = -1 on error                                         ;
;       eax = 0 when socket has been closed by the remote end     ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_receive:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_receive: socknum=%u bufaddr=%x buflength=%u flags=%x\n", ecx, edx, esi, edi
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
  .loop:
        push    edi
        call    [eax + SOCKET.rcv_proc]
        pop     edi
 
        test    [eax + SOCKET.state], SS_CANTRCVMORE
        jnz     .last_data
 
        cmp     ebx, EWOULDBLOCK
        jne     .return
 
        test    edi, MSG_DONTWAIT
        jnz     .return_err
 
        test    [eax + SOCKET.options], SO_NONBLOCK
        jnz     .return_err
 
        call    socket_block
        jmp     .loop
 
 
  .invalid:
        push    EINVAL
        pop     ebx
  .return_err:
        mov     ecx, -1
  .return:
        mov     [esp+20], ebx
        mov     [esp+32], ecx
        ret
 
  .last_data:
        test    ecx, ecx
        jz      .return
        call    socket_notify                                   ; Call me again!
        jmp     .return
 
 
 
 
align 4
socket_receive_dgram:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_receive: DGRAM\n"
 
        test    edi, MSG_PEEK
        jnz     .peek
 
        mov     ebx, esi                                        ; buffer length
 
        get_from_queue (eax + SOCKET_QUEUE_LOCATION), SOCKET_QUEUE_SIZE, sizeof.socket_queue_entry, .wouldblock ; sets esi only on success.
        mov     ecx, [esi + socket_queue_entry.data_size]
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_receive: %u bytes data\n", ecx
 
        cmp     ecx, ebx                                        ; If data segment does not fit in applications buffer, abort
        ja      .too_small
 
        push    eax ecx
        push    [esi + socket_queue_entry.buf_ptr]              ; save the buffer addr so we can clear it later
        mov     esi, [esi + socket_queue_entry.data_ptr]
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_receive: Source buffer=%x real addr=%x\n", [esp], esi
 
; copy the data from kernel buffer to application buffer
        mov     edi, edx                                        ; bufferaddr
        shr     ecx, 1
        jnc     .nb
        movsb
  .nb:
        shr     ecx, 1
        jnc     .nw
        movsw
  .nw:
        test    ecx, ecx
        jz      .nd
        rep movsd
  .nd:
 
        call    net_buff_free
        pop     ecx eax                                         ; return number of bytes copied to application
        cmp     [eax + SOCKET_QUEUE_LOCATION + queue.size], 0
        je      @f
        call    socket_notify                                   ; Queue another network event
  @@:
        xor     ebx, ebx                                        ; errorcode = 0 (no error)
        ret
 
  .too_small:
        mov     ecx, -1
        push    EMSGSIZE
        pop     ebx
        ret
 
  .wouldblock:
        push    EWOULDBLOCK
        pop     ebx
        ret
 
  .peek:
        xor     ebx, ebx
        xor     ecx, ecx
        cmp     [eax + SOCKET_QUEUE_LOCATION + queue.size], 0
        je      @f
        mov     esi, [eax + SOCKET_QUEUE_LOCATION + queue.r_ptr]
        mov     ecx, [esi + socket_queue_entry.data_size]
  @@:
        ret
 
 
align 4
socket_receive_local:
 
        ; does this socket have a PID yet?
        cmp     [eax + SOCKET.PID], 0
        jne     @f
 
        ; Change PID to that of current process
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx + TASKDATA.pid]
        mov     [eax + SOCKET.PID], ebx
        mov     [eax + SOCKET.TID], ebx                         ; currently TID = PID in kolibrios :(
      @@:
 
        mov     [eax + SOCKET.rcv_proc], socket_receive_stream
 
; ... continue to SOCKET_receive_stream
 
align 4
socket_receive_stream:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_receive: STREAM\n"
 
        cmp     [eax + STREAM_SOCKET.rcv + RING_BUFFER.size], 0
        je      .wouldblock
 
        test    edi, MSG_PEEK
        jnz     .peek
 
        mov     ecx, esi
        mov     edi, edx
        xor     edx, edx
 
        push    eax
        add     eax, STREAM_SOCKET.rcv
        call    socket_ring_read                                ; copy data from kernel buffer to application buffer
        call    socket_ring_free                                ; free read memory
        pop     eax
 
        cmp     [eax + STREAM_SOCKET.rcv + RING_BUFFER.size], 0
        jne     .more_data
        xor     ebx, ebx                                        ; errorcode = 0 (no error)
        ret
 
  .more_data:
        call    socket_notify                                   ; Queue another network event
        xor     ebx, ebx                                        ; errorcode = 0 (no error)
        ret
 
  .wouldblock:
        push    EWOULDBLOCK
        pop     ebx
        xor     ecx, ecx
        ret
 
  .peek:
        mov     ecx, [eax + STREAM_SOCKET.rcv + RING_BUFFER.size]
        xor     ebx, ebx
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_send: Send some data to the remote end.                  ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = pointer to data                                     ;
;       esi = data length                                         ;
;       edi = flags                                               ;
;                                                                 ;
;  OUT: eax = number of bytes sent                                ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_send:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: socknum=%u data ptr=%x length=%u flags=%x\n", ecx, edx, esi, edi
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        mov     ecx, esi
        mov     esi, edx
 
        jmp     [eax + SOCKET.snd_proc]
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
 
align 4
socket_send_udp:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: UDP\n"
 
        mov     [esp+32], ecx
        call    udp_output
        cmp     eax, -1
        je      .error
        ret
 
  .error:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EMSGSIZE ; FIXME: UDP_output should return error codes!
        ret
 
 
align 4
socket_send_tcp:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: TCP\n"
 
        push    eax
        add     eax, STREAM_SOCKET.snd
        call    socket_ring_write
        pop     eax
 
        mov     [esp+32], ecx
        mov     [eax + SOCKET.errorcode], 0
        push    eax
        call    tcp_output              ; FIXME: this doesnt look pretty, does it?
        pop     eax
        mov     eax, [eax + SOCKET.errorcode]
        mov     [esp+20], eax
        ret
 
 
align 4
socket_send_ip:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: IPv4\n"
 
        mov     [esp+32], ecx
        call    ipv4_output_raw
        cmp     eax, -1
        je      .error
        ret
 
  .error:
        mov     dword[esp+32], eax
        mov     dword[esp+20], ebx
        ret
 
 
align 4
socket_send_icmp:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: ICMP\n"
 
        mov     [esp+32], ecx
        call    icmp_output_raw
        cmp     eax, -1
        je      .error
        ret
 
  .error:
        mov     dword[esp+32], eax
        mov     dword[esp+20], ebx
        ret
 
 
align 4
socket_send_pppoe:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: PPPoE\n"
 
        mov     [esp+32], ecx
        mov     ebx, [eax + SOCKET.device]
 
        call    pppoe_discovery_output  ; FIXME: errorcodes
        cmp     eax, -1
        je      .error
        ret
 
  .error:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EMSGSIZE
        ret
 
 
 
align 4
socket_send_local:
 
        ; does this socket have a PID yet?
        cmp     [eax + SOCKET.PID], 0
        jne     @f
 
        ; Change PID to that of current process
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx + TASKDATA.pid]
        mov     [eax + SOCKET.PID], ebx
        mov     [eax + SOCKET.TID], ebx         ; currently TID = PID in kolibrios :(
      @@:
        mov     [eax + SOCKET.snd_proc], socket_send_local_initialized
 
align 4
socket_send_local_initialized:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_send: LOCAL\n"
 
        ; get the other side's socket and check if it still exists
        mov     eax, [eax + SOCKET.device]
        call    socket_check
        jz      .invalid
 
        ; allright, shove in the data!
        push    eax
        add     eax, STREAM_SOCKET.rcv
        call    socket_ring_write
        pop     eax
 
        ; return the number of written bytes (or errorcode) to application
        mov     [esp+32], ecx
 
        ; and notify the other end
        call    socket_notify
 
        ret
 
  .invalid:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EINVAL
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_get_opt: Read a socket option                            ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = pointer to socket options struct                    ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_get_opt:
 
; FIXME:
; At moment, uses only pseudo-optname -2 for get last_ack_number for TCP.
; TODO: find best way to notify that send()'ed data were acknowledged
; Also pseudo-optname -3 is valid and returns socket state, one of TCPS_*.
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_get_opt\n"
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        cmp     dword [edx], IP_PROTO_TCP
        jne     .invalid
        cmp     dword [edx+4], -2
        je      @f
        cmp     dword [edx+4], -3
        jne     .invalid
@@:
;        mov     eax, [edx+12]
;        test    eax, eax
;        jz      .fail
;        cmp     dword [eax], 4
;        mov     dword [eax], 4
;        jb      .fail
;        stdcall net_socket_num_to_addr, ecx
;        test    eax, eax
;        jz      .fail
;        ; todo: check that eax is really TCP socket
;        mov     ecx, [eax + TCP_SOCKET.last_ack_number]
;        cmp     dword [edx+4], -2
;        jz      @f
;        mov     ecx, [eax + TCP_SOCKET.state]
@@:
        mov     eax, [edx+8]
        test    eax, eax
        jz      @f
        mov     [eax], ecx
@@:
        mov     dword [esp+32], 0
        ret
 
  .invalid:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EINVAL
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_set_options: Set a socket option.                        ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = pointer to socket options struct                    ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_set_opt:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_set_opt\n"
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        cmp     [edx + socket_options.level], IP_PROTO_IP
        je      .ip
        cmp     [edx + socket_options.level], SOL_SOCKET
        jne     .invalid
 
  .socket:
        cmp     [edx + socket_options.optname], SO_BINDTODEVICE
        jne     .invalid
 
  .bind:
        cmp     [edx + socket_options.optlen], 0
        je      .unbind
 
        movzx   edx, byte[edx + socket_options.optval]
        cmp     edx, NET_DEVICES_MAX
        ja      .invalid
 
        mov     edx, [net_device_list + 4*edx]
        test    edx, edx
        jz      .already
        mov     [eax + SOCKET.device], edx
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_set_opt: Bound socket %x to device %x\n", eax, edx
 
        mov     dword[esp+32], 0        ; success!
        ret
 
  .unbind:
        mov     [eax + SOCKET.device], 0
 
        mov     dword[esp+32], 0        ; success!
        ret
 
  .ip:
        cmp     [edx + socket_options.optname], IP_TTL
        jne     .invalid
 
  .ttl:
        mov     bl, byte[edx + socket_options.optval]
        mov     [eax + IP_SOCKET.ttl], bl
 
        mov     dword[esp+32], 0        ; success!
        ret
 
  .already:
        mov     dword[esp+20], EALREADY
        mov     dword[esp+32], -1
        ret
 
  .invalid:
        mov     dword[esp+20], EINVAL
        mov     dword[esp+32], -1
        ret
 
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_pair: Allocate a pair of linked local sockets.           ;
;                                                                 ;
;  IN: /                                                          ;
;                                                                 ;
; OUT: eax = socket1 num on success                               ;
;      eax = -1 on error                                          ;
;      ebx = socket2 num on success                               ;
;      ebx = errorcode on error                                   ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_pair:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_pair\n"
 
        call    socket_alloc
        test    eax, eax
        jz      .nomem1
        mov     [esp+32], edi   ; application's eax
 
        mov     [eax + SOCKET.Domain], AF_LOCAL
        mov     [eax + SOCKET.Type], SOCK_STREAM
        mov     [eax + SOCKET.Protocol], 0              ;;; CHECKME
        mov     [eax + SOCKET.snd_proc], socket_send_local
        mov     [eax + SOCKET.rcv_proc], socket_receive_local
        mov     [eax + SOCKET.PID], 0
        mov     ebx, eax
 
        call    socket_alloc
        test    eax, eax
        jz      .nomem2
        mov     [esp+20], edi   ; application's ebx
 
        mov     [eax + SOCKET.Domain], AF_LOCAL
        mov     [eax + SOCKET.Type], SOCK_STREAM
        mov     [eax + SOCKET.Protocol], 0              ;;; CHECKME
        mov     [eax + SOCKET.snd_proc], socket_send_local
        mov     [eax + SOCKET.rcv_proc], socket_receive_local
        mov     [eax + SOCKET.PID], 0
 
        ; Link the two sockets to eachother
        mov     [eax + SOCKET.device], ebx
        mov     [ebx + SOCKET.device], eax
 
        lea     eax, [eax + STREAM_SOCKET.rcv]
        call    socket_ring_create
        test    eax, eax
        jz      .nomem2
 
        lea     eax, [ebx + STREAM_SOCKET.rcv]
        call    socket_ring_create
        test    eax, eax
        jz      .nomem2
 
        ret
 
  .nomem2:
        mov     eax, [esp+20]
        call    socket_free
 
  .nomem1:
        mov     eax, [esp+32]
        call    socket_free
 
        mov     dword[esp+32], -1
        mov     dword[esp+20], ENOMEM
        ret
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_debug: Copy socket variables to application buffer.      ;
;                                                                 ;
;   IN: ecx = socket number                                       ;
;       edx = pointer to application buffer                       ;
;                                                                 ;
;  OUT: eax = 0 on success                                        ;
;       eax = -1 on error                                         ;
;       ebx = errorcode on error                                  ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_debug:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_debug\n"
 
        mov     edi, edx
 
        test    ecx, ecx
        jz      .returnall
 
        call    socket_num_to_ptr
        test    eax, eax
        jz      .invalid
 
        mov     esi, eax
        mov     ecx, SOCKET_STRUCT_SIZE/4
        rep movsd
 
        mov     dword[esp+32], 0
        ret
 
  .returnall:
        mov     ebx, net_sockets
  .next_socket:
        mov     ebx, [ebx + SOCKET.NextPtr]
        test    ebx, ebx
        jz      .done
        mov     eax, [ebx + SOCKET.Number]
        stosd
        jmp     .next_socket
  .done:
        xor     eax, eax
        stosd
        mov     dword[esp+32], eax
        ret
 
  .invalid:
        mov     dword[esp+32], -1
        mov     dword[esp+20], EINVAL
        ret
 
 
;-----------------------------------------------------------------;
;   ____                                                 ____     ;
;   \  /              End of sockets API                 \  /     ;
;    \/                                                   \/      ;
;    ()        Internally used functions follow           ()      ;
;                                                                 ;
;-----------------------------------------------------------------;
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_find_port:                                               ;
; Fill in the local port number for TCP and UDP sockets           ;
; This procedure always works because the number of sockets is    ;
; limited to a smaller number then the number of possible ports   ;
;                                                                 ;
;  IN:  eax = socket pointer                                      ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_find_port:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_find_port\n"
 
        push    ebx esi ecx
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_UDP
        je      .udp
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_TCP
        je      .tcp
 
        pop     ecx esi ebx
        ret
 
  .udp:
        mov     bx, [last_UDP_port]
        call    .findit
        mov     [last_UDP_port], bx
 
        pop     ecx esi ebx
        ret
 
  .tcp:
        mov     bx, [last_TCP_port]
        call    .findit
        mov     [last_TCP_port], bx
 
        pop     ecx esi ebx
        ret
 
 
  .restart:
        mov     bx, MIN_EPHEMERAL_PORT_N
  .findit:
        cmp     bx, MAX_EPHEMERAL_PORT_N
        je      .restart
 
        add     bh, 1
        adc     bl, 0
 
        call    socket_check_port
        jz      .findit
        ret
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_check_port: (to be used with AF_INET only!)              ;
; Checks if a local port number is unused                         ;
; If the proposed port number is unused, it is filled in in the   ;
; socket structure.                                               ;
;                                                                 ;
;   IN: eax = socket ptr                                          ;
;       bx = proposed socket number (network byte order)          ;
;                                                                 ;
;  OUT: ZF = set on error                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_check_port:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_check_port: "
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_lock
        popa
 
        mov     ecx, [eax + SOCKET.Protocol]
        mov     edx, [eax + IP_SOCKET.LocalIP]
        mov     esi, net_sockets
 
  .next_socket:
        mov     esi, [esi + SOCKET.NextPtr]
        or      esi, esi
        jz      .port_ok
 
        cmp     [esi + SOCKET.Protocol], ecx
        jne     .next_socket
 
        cmp     [esi + IP_SOCKET.LocalIP], edx
        jne     .next_socket
 
        cmp     [esi + UDP_SOCKET.LocalPort], bx
        jne     .next_socket
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_unlock
        popa
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "local port %x already in use\n", bx  ; FIXME: find a way to print big endian values with debugf
        ret
 
  .port_ok:
        pusha
        mov     ecx, socket_mutex
        call    mutex_unlock
        popa
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "local port %x is free\n", bx         ; FIXME: find a way to print big endian values with debugf
        mov     [eax + UDP_SOCKET.LocalPort], bx
        or      bx, bx                                  ; clear the zero-flag
        ret
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_input: Update a (stateless) socket with received data.   ;
;                                                                 ;
; Note: The socket's mutex should already be set !                ;
;                                                                 ;
;   IN: eax = socket ptr                                          ;
;       ecx = data size                                           ;
;       esi = ptr to data                                         ;
;       [esp] = ptr to buf                                        ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_input:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_input: socket=%x, data=%x size=%u\n", eax, esi, ecx
 
        push    ecx
        push    esi
        mov     esi, esp
 
        add_to_queue (eax + SOCKET_QUEUE_LOCATION), SOCKET_QUEUE_SIZE, sizeof.socket_queue_entry, .full
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_input: success\n"
        add     esp, sizeof.socket_queue_entry
 
        pusha
        lea     ecx, [eax + SOCKET.mutex]
        call    mutex_unlock
        popa
 
        jmp     socket_notify
 
  .full:
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_input: socket %x is full!\n", eax
 
        pusha
        lea     ecx, [eax + SOCKET.mutex]
        call    mutex_unlock
        popa
 
        add     esp, 8
        call    net_buff_free
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_ring_create: Create a ringbuffer for sockets.            ;
;                                                                 ;
;   IN: eax = ptr to ring struct                                  ;
;                                                                 ;
;  OUT: eax = 0 on error                                          ;
;       eax = start ptr                                           ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_ring_create:
 
        push    esi
        mov     esi, eax
 
        push    edx
        stdcall create_ring_buffer, SOCKET_BUFFER_SIZE, PG_SWR
        pop     edx
        test    eax, eax
        jz      .fail
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_create: %x\n", eax
 
        pusha
        lea     ecx, [esi + RING_BUFFER.mutex]
        call    mutex_init
        popa
 
        mov     [esi + RING_BUFFER.start_ptr], eax
        mov     [esi + RING_BUFFER.write_ptr], eax
        mov     [esi + RING_BUFFER.read_ptr], eax
        mov     [esi + RING_BUFFER.size], 0
        add     eax, SOCKET_BUFFER_SIZE
        mov     [esi + RING_BUFFER.end_ptr], eax
        mov     eax, esi
 
        pop     esi
        ret
 
  .fail:
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_ring_create: Out of memory!\n"
        pop     esi
        ret
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_ring_write: Write data to ring buffer.                   ;
;                                                                 ;
;   IN: eax = ptr to ring struct                                  ;
;       ecx = data size                                           ;
;       esi = ptr to data                                         ;
;                                                                 ;
;  OUT: ecx = number of bytes stored                              ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_ring_write:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_write: ringbuff=%x ptr=%x size=%u\n", eax, esi, ecx
 
; lock mutex
        pusha
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_lock                                      ; TODO: check what registers this function actually destroys
        popa
 
; calculate available size
        mov     edi, SOCKET_BUFFER_SIZE
        sub     edi, [eax + RING_BUFFER.size]                   ; available buffer size in edi
        cmp     ecx, edi
        jbe     .copy
        mov     ecx, edi
  .copy:
        mov     edi, [eax + RING_BUFFER.write_ptr]
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_write: %u bytes from %x to %x\n", ecx, esi, edi
 
; update write ptr
        push    edi
        add     edi, ecx
        cmp     edi, [eax + RING_BUFFER.end_ptr]
        jb      @f
        sub     edi, SOCKET_BUFFER_SIZE                         ; WRAP
  @@:
 
        mov     [eax + RING_BUFFER.write_ptr], edi
        pop     edi
 
; update size
        add     [eax + RING_BUFFER.size], ecx
 
; copy the data
        push    ecx
        shr     ecx, 1
        jnc     .nb
        movsb
  .nb:
        shr     ecx, 1
        jnc     .nw
        movsw
  .nw:
        test    ecx, ecx
        jz      .nd
        rep movsd
  .nd:
        pop     ecx
 
; unlock mutex
        pusha
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_unlock                                    ; TODO: check what registers this function actually destroys
        popa
 
        ret
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_ring_read: Read from ring buffer                         ;
;                                                                 ;
;   IN: eax = ring struct ptr                                     ;
;       ecx = bytes to read                                       ;
;       edx = offset                                              ;
;       edi = ptr to buffer start                                 ;
;                                                                 ;
;  OUT: eax = unchanged                                           ;
;       ecx = number of bytes read (0 on error)                   ;
;       edx = destroyed                                           ;
;       esi = destroyed                                           ;
;       edi = ptr to buffer end                                   ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_ring_read:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_read: ringbuff=%x ptr=%x size=%u offset=%x\n", eax, edi, ecx, edx
 
        pusha
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_lock                                      ; TODO: check what registers this function actually destroys
        popa
 
        mov     esi, [eax + RING_BUFFER.read_ptr]
        add     esi, edx                                        ; esi = start_ptr + offset
 
        neg     edx
        add     edx, [eax + RING_BUFFER.size]                   ; edx = snd.size - offset
        jle     .no_data_at_all
 
        pusha
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_unlock                                    ; TODO: check what registers this function actually destroys
        popa
 
        cmp     ecx, edx
        ja      .less_data
 
  .copy:
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_read: %u bytes from %x to %x\n", ecx, esi, edi
        push    ecx
        shr     ecx, 1
        jnc     .nb
        movsb
  .nb:
        shr     ecx, 1
        jnc     .nw
        movsw
  .nw:
        test    ecx, ecx
        jz      .nd
        rep movsd
  .nd:
        pop     ecx
        ret
 
  .no_data_at_all:
        pusha
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_unlock                                    ; TODO: check what registers this function actually destroys
        popa
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_read: no data at all!\n"
        xor     ecx, ecx
        ret
 
  .less_data:
        mov     ecx, edx
        jmp     .copy
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_ring_free: Free data from a ringbuffer.                  ;
;                                                                 ;
;   IN: eax = ptr to ring struct                                  ;
;       ecx = data size                                           ;
;                                                                 ;
;  OUT: ecx = number of freed bytes                               ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_ring_free:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_free: %u bytes from ring %x\n", ecx, eax
 
        push    eax ecx
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_lock                                      ; TODO: check what registers this function actually destroys
        pop     ecx eax
 
        sub     [eax + RING_BUFFER.size], ecx
        jb      .error
        add     [eax + RING_BUFFER.read_ptr], ecx
 
        mov     edx, [eax + RING_BUFFER.end_ptr]
        cmp     [eax + RING_BUFFER.read_ptr], edx
        jb      @f
        sub     [eax + RING_BUFFER.read_ptr], SOCKET_BUFFER_SIZE
       @@:
 
        push    eax ecx
        lea     ecx, [eax + RING_BUFFER.mutex]                  ; TODO: check what registers this function actually destroys
        call    mutex_unlock
        pop     ecx eax
 
        ret
 
  .error:       ; we could free all available bytes, but that would be stupid, i guess..
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ring_free: buffer=%x error!\n", eax
        add     [eax + RING_BUFFER.size], ecx
 
        push    eax
        lea     ecx, [eax + RING_BUFFER.mutex]
        call    mutex_unlock                                    ; TODO: check what registers this function actually destroys
        pop     eax
 
        xor     ecx, ecx
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_block: Suspend the thread attached to a socket.          ;
;                                                                 ;
;   IN: eax = socket ptr                                          ;
;                                                                 ;
;  OUT: eax = unchanged                                           ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_block:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_block: %x\n", eax
 
        push    eax
 
        pushf
        cli
 
        ; Set the 'socket is blocked' flag
        or      [eax + SOCKET.state], SS_BLOCKED
 
        ; Suspend the thread
        push    edx
        mov     edx, [TASK_BASE]
        mov     [edx + TASKDATA.state], 1               ; Suspended
 
        ; Remember the thread ID so we can wake it up again
        mov     edx, [edx + TASKDATA.pid]
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_block: suspending thread: %u\n", edx
        mov     [eax + SOCKET.TID], edx
        pop     edx
        popf
 
        call    change_task
        pop     eax
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_block: continuing\n"
 
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_notify: Wake up socket owner thread.                     ;
;                                                                 ;
;   IN: eax = socket ptr                                          ;
;                                                                 ;
;  OUT: eax = unchanged                                           ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_notify:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_notify: %x\n", eax
 
        call    socket_check
        jz      .error
 
; Find the associated thread's TASK_DATA
        push    ebx ecx esi
        mov     ebx, [eax + SOCKET.TID]
        test    ebx, ebx
        jz      .error2
        xor     ecx, ecx
        inc     ecx
        mov     esi, TASK_DATA
  .next:
        cmp     [esi + TASKDATA.pid], ebx
        je      .found
        inc     ecx
        add     esi, 0x20
        cmp     ecx, [TASK_COUNT]
        jbe     .next
 
  .error2:
; PID not found, TODO: close socket!
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_notify: error finding thread 0x%x !\n", ebx
        pop     esi ecx ebx
        ret
 
  .error:
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_notify: invalid socket ptr: 0x%x !\n", eax
        ret
 
  .found:
        test    [eax + SOCKET.state], SS_BLOCKED
        jnz     .un_block
 
; Socket and thread exists and socket is of non blocking type.
; We'll try to flag an event to the thread.
        shl     ecx, 8
        or      [SLOT_BASE + ecx + APPDATA.event_mask], EVENT_NETWORK
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_notify: poking thread %u!\n", ebx
        pop     esi ecx ebx
        ret
 
 
  .un_block:
; Socket and thread exists and socket is of blocking type
; We'll try to unblock it.
        and     [eax + SOCKET.state], not SS_BLOCKED    ; Clear the 'socket is blocked' flag
        mov     [esi + TASKDATA.state], 0               ; Run the thread
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_notify: Unblocked socket!\n"
        pop     esi ecx ebx
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_alloc: Allocate memory for socket and put new socket     ;
; into the list. Newly created socket is initialized with calling ;
; PID and given a socket number.                                  ;
;                                                                 ;
;  IN:  /                                                         ;
;                                                                 ;
; OUT:  eax = socket ptr on success                               ;
;       eax = 0 on error                                          ;
;       edi = socket number on success                            ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_alloc:
 
        push    ebx
 
        stdcall kernel_alloc, SOCKET_STRUCT_SIZE
        or      eax, eax
        jz      .nomem
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_alloc: ptr=%x\n", eax
 
; zero-initialize allocated memory
        push    eax
        mov     edi, eax
        mov     ecx, SOCKET_STRUCT_SIZE / 4
        xor     eax, eax
        rep stosd
        pop     eax
 
; set send-and receive procedures to return -1
        mov     [eax + SOCKET.snd_proc], .not_yet
        mov     [eax + SOCKET.rcv_proc], .not_yet
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_lock
        popa
 
; find first free socket number and use it
        mov     edi, [last_socket_num]
  .next_socket_number:
        inc     edi
        jz      .next_socket_number     ; avoid socket nr 0
        cmp     edi, -1
        je      .next_socket_number     ; avoid socket nr -1
        mov     ebx, net_sockets
  .next_socket:
        mov     ebx, [ebx + SOCKET.NextPtr]
        test    ebx, ebx
        jz      .last_socket
 
        cmp     [ebx + SOCKET.Number], edi
        jne     .next_socket
        jmp     .next_socket_number
 
  .last_socket:
        mov     [last_socket_num], edi
        mov     [eax + SOCKET.Number], edi
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_alloc: number=%u\n", edi
 
; Fill in PID
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx + TASKDATA.pid]
        mov     [eax + SOCKET.PID], ebx
        mov     [eax + SOCKET.TID], ebx         ; currently TID = PID in kolibrios :(
 
; init mutex
        pusha
        lea     ecx, [eax + SOCKET.mutex]
        call    mutex_init
        popa
 
; add socket to the list by re-arranging some pointers
        mov     ebx, [net_sockets + SOCKET.NextPtr]
 
        mov     [eax + SOCKET.PrevPtr], net_sockets
        mov     [eax + SOCKET.NextPtr], ebx
 
        test    ebx, ebx
        jz      @f
 
        pusha
        lea     ecx, [ebx + SOCKET.mutex]
        call    mutex_lock
        popa
 
        mov     [ebx + SOCKET.PrevPtr], eax
 
        pusha
        lea     ecx, [ebx + SOCKET.mutex]
        call    mutex_unlock
        popa
       @@:
 
        mov     [net_sockets + SOCKET.NextPtr], eax
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_unlock
        popa
        pop     ebx
 
        ret
 
  .nomem:
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_alloc: Out of memory!\n"
        pop     ebx
        ret
 
  .not_yet:
        mov     dword[esp+20], ENOTCONN
        mov     dword[esp+32], -1
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_free: Free socket data memory and remove socket from     ;
; the list. Caller should lock and unlock socket_mutex.           ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
; OUT:  /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_free:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_free: %x\n", eax
 
        call    socket_check
        jz      .error
 
        push    ebx
 
        pusha
        lea     ecx, [eax + SOCKET.mutex]
        call    mutex_lock
        popa
 
        cmp     [eax + SOCKET.Type], SOCK_STREAM
        jne     .no_stream
 
        mov     ebx, eax
        cmp     [eax + STREAM_SOCKET.rcv.start_ptr], 0
        je      @f
        stdcall free_kernel_space, [eax + STREAM_SOCKET.rcv.start_ptr]
  @@:
        cmp     [ebx + STREAM_SOCKET.snd.start_ptr], 0
        je      @f
        stdcall free_kernel_space, [ebx + STREAM_SOCKET.snd.start_ptr]
  @@:
        mov     eax, ebx
  .no_stream:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_free: freeing socket %x\n", eax
        push    eax                             ; this will be passed to kernel_free
        mov     ebx, [eax + SOCKET.NextPtr]
        mov     eax, [eax + SOCKET.PrevPtr]
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_free: linking socket %x to socket %x\n", eax, ebx
 
        test    eax, eax
        jz      @f
        mov     [eax + SOCKET.NextPtr], ebx
       @@:
 
        test    ebx, ebx
        jz      @f
        mov     [ebx + SOCKET.PrevPtr], eax
       @@:
 
        call    kernel_free
        pop     ebx
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_free: success!\n"
 
  .error:
        ret
 
  .error1:
        pop     ebx
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_free: error!\n"
        DEBUGF  DEBUG_NETWORK_ERROR, "socket ptr=0x%x caller=0x%x\n", eax, [esp]
        ret
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_fork: Create a child socket.                             ;
;                                                                 ;
;  IN:  ebx = socket number                                       ;
;                                                                 ;
; OUT:  eax = child socket number on success                      ;
;       eax = 0 on error                                          ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_fork:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_fork: %x\n", ebx
 
; Exit if backlog queue is full
        mov     eax, [ebx + SOCKET_QUEUE_LOCATION + queue.size]
        cmp     ax, [ebx + SOCKET.backlog]
        jae     .fail
 
; Allocate new socket
        push    ebx
        call    socket_alloc
        pop     ebx
        test    eax, eax
        jz      .fail
 
        push    eax
        mov     esi, esp
        add_to_queue (ebx + SOCKET_QUEUE_LOCATION), MAX_backlog, 4, .fail2
        pop     eax
 
; Copy structure from current socket to new
; We start at PID to preserve the socket num, 2 pointers and mutex
; TID will be filled in later
        lea     esi, [ebx + SOCKET.PID]
        lea     edi, [eax + SOCKET.PID]
        mov     ecx, (SOCKET_QUEUE_LOCATION - SOCKET.PID + 3)/4
        rep movsd
 
        and     [eax + SOCKET.options], not SO_ACCEPTCON
 
; Notify owner of parent socket
        push    eax
        mov     eax, ebx
        call    socket_notify
        pop     eax
 
        ret
 
  .fail2:
        add     esp, 4+4+4
  .fail:
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_fork: failed\n"
        xor     eax, eax
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_num_to_ptr: Get socket structure address by its number.  ;
;                                                                 ;
;  IN:  ecx = socket number                                       ;
;                                                                 ;
; OUT:  eax = socket ptr                                          ;
;       eax = 0 on error                                          ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_num_to_ptr:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_num_to_ptr: num=%u ", ecx
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_lock
        popa
 
        mov     eax, net_sockets
  .next_socket:
        mov     eax, [eax + SOCKET.NextPtr]
        test    eax, eax
        jz      .error
        cmp     [eax + SOCKET.Number], ecx
        jne     .next_socket
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_unlock
        popa
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "ptr=%x\n", eax
        ret
 
  .error:
        pusha
        mov     ecx, socket_mutex
        call    mutex_unlock
        popa
 
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_num_to_ptr: socket %u not found!\n", eax
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_num_to_ptr: caller = 0x%x\n", [esp]
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_ptr_to_num: Get socket number by its address.            ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
; OUT:  eax = socket number                                       ;
;       eax = 0 on error                                          ;
;       ZF = set on error                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_ptr_to_num:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_ptr_to_num: ptr=%x ", eax
 
        call    socket_check
        jz      .error
 
        mov     eax, [eax + SOCKET.Number]
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "num=%u\n", eax
        ret
 
  .error:
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_ptr_to_num: not found\n", eax
        ret
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_check: Checks if the given ptr is really a socket ptr.   ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
; OUT:  eax = 0 on error                                          ;
;       ZF = set on error                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_check:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_check: %x\n", eax
 
        test    eax, eax
        jz      .error
        push    ebx
        mov     ebx, net_sockets
 
  .next_socket:
        mov     ebx, [ebx + SOCKET.NextPtr]
        or      ebx, ebx
        jz      .done
        cmp     ebx, eax
        jnz     .next_socket
 
  .done:
        mov     eax, ebx
        test    eax, eax
        pop     ebx
        ret
 
  .error:
        DEBUGF  DEBUG_NETWORK_ERROR, "SOCKET_check: called with argument 0\n"
        DEBUGF  DEBUG_NETWORK_ERROR, "stack: 0x%x, 0x%x, 0x%x\n", [esp], [esp+4], [esp+8]
        ret
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_check_owner: Check if the caller app owns the socket.    ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
; OUT:  ZF = true/false                                           ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_check_owner:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_check_owner: %x\n", eax
 
        push    ebx
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx + TASKDATA.pid]
        cmp     [eax + SOCKET.PID], ebx
        pop     ebx
 
        ret
 
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_process_end: Kernel calls this function when a certain   ;
; process ends. This function will check if the process had any   ;
; open sockets and update them accordingly (clean up).            ;
;                                                                 ;
;  IN:  edx = pid                                                 ;
;                                                                 ;
; OUT:  /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_process_end:
 
        ret     ; FIXME
 
        cmp     [net_sockets + SOCKET.NextPtr], 0       ; Are there any active sockets at all?
        je      .quickret                               ; nope, exit immediately
 
; TODO: run the following code in another thread, to avoid deadlock
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_process_end: %x\n", edx
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_lock
        popa
 
        push    ebx
        mov     ebx, net_sockets
 
  .next_socket:
        mov     ebx, [ebx + SOCKET.NextPtr]
  .next_socket_test:
        test    ebx, ebx
        jz      .done
 
        cmp     [ebx + SOCKET.PID], edx
        jne     .next_socket
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_process_end: killing socket %x\n", ebx
 
        mov     [ebx + SOCKET.PID], 0
        mov     eax, ebx
        mov     ebx, [ebx + SOCKET.NextPtr]
 
        pusha
        cmp     [eax + SOCKET.Domain], AF_INET4
        jne     .free
 
        cmp     [eax + SOCKET.Protocol], IP_PROTO_TCP
        jne     .free
 
        call    tcp_disconnect
        jmp     .closed
 
  .free:
        call    socket_free
 
  .closed:
        popa
        jmp     .next_socket_test
 
  .done:
        pop     ebx
 
        pusha
        mov     ecx, socket_mutex
        call    mutex_unlock
        popa
 
  .quickret:
        ret
 
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_is_connecting: Update socket state.                      ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_is_connecting:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_is_connecting: %x\n", eax
 
        and     [eax + SOCKET.state], not (SS_ISCONNECTED + SS_ISDISCONNECTING + SS_ISCONFIRMING)
        or      [eax + SOCKET.state], SS_ISCONNECTING
        ret
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_is_connected: Update socket state.                       ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_is_connected:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_is_connected: %x\n", eax
 
        and     [eax + SOCKET.state], not (SS_ISCONNECTING + SS_ISDISCONNECTING + SS_ISCONFIRMING)
        or      [eax + SOCKET.state], SS_ISCONNECTED
        jmp     socket_notify
 
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_is_disconnecting: Update socket state.                   ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_is_disconnecting:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_is_disconnecting: %x\n", eax
 
        and     [eax + SOCKET.state], not (SS_ISCONNECTING)
        or      [eax + SOCKET.state], SS_ISDISCONNECTING + SS_CANTRCVMORE + SS_CANTSENDMORE
        jmp     socket_notify
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_is_disconnected: Update socket state.                    ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_is_disconnected:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_is_disconnected: %x\n", eax
 
        and     [eax + SOCKET.state], not (SS_ISCONNECTING + SS_ISCONNECTED + SS_ISDISCONNECTING)
        or      [eax + SOCKET.state], SS_CANTRCVMORE + SS_CANTSENDMORE
        jmp     socket_notify
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_cant_recv_more: Update socket state.                     ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_cant_recv_more:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_cant_recv_more: %x\n", eax
 
        or      [eax + SOCKET.state], SS_CANTRCVMORE
        jmp     socket_notify
 
 
 
;-----------------------------------------------------------------;
;                                                                 ;
; socket_cant_send_more: Update socket state.                     ;
;                                                                 ;
;  IN:  eax = socket ptr                                          ;
;                                                                 ;
;  OUT: /                                                         ;
;                                                                 ;
;-----------------------------------------------------------------;
align 4
socket_cant_send_more:
 
        DEBUGF  DEBUG_NETWORK_VERBOSE, "SOCKET_cant_send_more: %x\n", eax
 
        or      [eax + SOCKET.state], SS_CANTSENDMORE
        mov     [eax + SOCKET.snd_proc], .notconn
        jmp     socket_notify
 
  .notconn:
        mov     dword[esp+20], ENOTCONN
        mov     dword[esp+32], -1
        ret

Rev 7678	Rev 7679
1	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	1	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
2	;; ;;	2	;; ;;
3	;; Copyright (C) KolibriOS team 2004-2019. All rights reserved. ;;	3	;; Copyright (C) KolibriOS team 2004-2019. All rights reserved. ;;
4	;; Distributed under terms of the GNU General Public License ;;	4	;; Distributed under terms of the GNU General Public License ;;
5	;; ;;	5	;; ;;
6	;; Part of the TCP/IP network stack for KolibriOS ;;	6	;; Part of the TCP/IP network stack for KolibriOS ;;
7	;; ;;	7	;; ;;
8	;; Written by hidnplayr@kolibrios.org, ;;	8	;; Written by hidnplayr@kolibrios.org, ;;
9	;; and Clevermouse. ;;	9	;; and Clevermouse. ;;
10	;; ;;	10	;; ;;
11	;; Based on code by mike.dld ;;	11	;; Based on code by mike.dld ;;
12	;; ;;	12	;; ;;
13	;; GNU GENERAL PUBLIC LICENSE ;;	13	;; GNU GENERAL PUBLIC LICENSE ;;
14	;; Version 2, June 1991 ;;	14	;; Version 2, June 1991 ;;
15	;; ;;	15	;; ;;
16	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	16	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
17		17
18	$Revision: 7678 $	18	$Revision: 7679 $
19		19
20	struct SOCKET	20	struct SOCKET
21		21
22	NextPtr dd ? ; pointer to next socket in list	22	NextPtr dd ? ; pointer to next socket in list
23	PrevPtr dd ? ; pointer to previous socket in list	23	PrevPtr dd ? ; pointer to previous socket in list
24	Number dd ? ; socket number	24	Number dd ? ; socket number
25		25
26	mutex MUTEX	26	mutex MUTEX
27		27
28	PID dd ? ; process ID	28	PID dd ? ; process ID
29	TID dd ? ; thread ID	29	TID dd ? ; thread ID
30	Domain dd ? ; INET4/INET6/LOCAL/..	30	Domain dd ? ; INET4/INET6/LOCAL/..
31	Type dd ? ; RAW/STREAM/DGRAM	31	Type dd ? ; RAW/STREAM/DGRAM
32	Protocol dd ? ; UDP/TCP/ARP/ICMP	32	Protocol dd ? ; UDP/TCP/ARP/ICMP
33	errorcode dd ?	33	errorcode dd ?
34	device dd ? ; device pointer, paired socket pointer if it's a local socket	34	device dd ? ; device pointer, paired socket pointer if it's a local socket
35		35
36	options dd ?	36	options dd ?
37	state dd ?	37	state dd ?
38	backlog dw ? ; number of incoming connections that can be queued	38	backlog dw ? ; number of incoming connections that can be queued
39		39
40	snd_proc dd ?	40	snd_proc dd ?
41	rcv_proc dd ?	41	rcv_proc dd ?
42	connect_proc dd ?	42	connect_proc dd ?
43		43
44	ends	44	ends
45		45
46	struct IP_SOCKET SOCKET	46	struct IP_SOCKET SOCKET
47		47
48	LocalIP rd 4 ; network byte order	48	LocalIP rd 4 ; network byte order
49	RemoteIP rd 4 ; network byte order	49	RemoteIP rd 4 ; network byte order
50	ttl db ?	50	ttl db ?
51	rb 3 ; align	51	rb 3 ; align
52		52
53	ends	53	ends
54		54
55	struct TCP_SOCKET IP_SOCKET	55	struct TCP_SOCKET IP_SOCKET
56		56
57	LocalPort dw ? ; network byte order	57	LocalPort dw ? ; network byte order
58	RemotePort dw ? ; network byte order	58	RemotePort dw ? ; network byte order
59		59
60	t_state dd ? ; TCB state	60	t_state dd ? ; TCB state
61	t_rxtshift db ?	61	t_rxtshift db ?
62	rb 3 ; align	62	rb 3 ; align
63	t_rxtcur dd ?	63	t_rxtcur dd ?
64	t_dupacks dd ?	64	t_dupacks dd ?
65	t_maxseg dd ?	65	t_maxseg dd ?
66	t_flags dd ?	66	t_flags dd ?
67		67
68	;---------------	68	;---------------
69	; RFC783 page 21	69	; RFC783 page 21
70		70
71	; send sequence	71	; send sequence
72	SND_UNA dd ? ; sequence number of unack'ed sent Packets	72	SND_UNA dd ? ; sequence number of unack'ed sent Packets
73	SND_NXT dd ? ; next send sequence number to use	73	SND_NXT dd ? ; next send sequence number to use
74	SND_UP dd ? ; urgent pointer	74	SND_UP dd ? ; urgent pointer
75	SND_WL1 dd ? ; the sequence number of the last segment used to update the send window	75	SND_WL1 dd ? ; the sequence number of the last segment used to update the send window
76	SND_WL2 dd ? ; the acknowledgment number of the last segment used to update the send window	76	SND_WL2 dd ? ; the acknowledgment number of the last segment used to update the send window
77	ISS dd ? ; initial send sequence number	77	ISS dd ? ; initial send sequence number
78	SND_WND dd ? ; send window	78	SND_WND dd ? ; send window
79		79
80	; receive sequence	80	; receive sequence
81	RCV_WND dd ? ; receive window	81	RCV_WND dd ? ; receive window
82	RCV_NXT dd ? ; next receive sequence number to use	82	RCV_NXT dd ? ; next receive sequence number to use
83	RCV_UP dd ? ; urgent pointer	83	RCV_UP dd ? ; urgent pointer
84	IRS dd ? ; initial receive sequence number	84	IRS dd ? ; initial receive sequence number
85		85
86	;---------------------	86	;---------------------
87	; Additional variables	87	; Additional variables
88		88
89	; receive variables	89	; receive variables
90	RCV_ADV dd ?	90	RCV_ADV dd ?
91		91
92	; retransmit variables	92	; retransmit variables
93	SND_MAX dd ?	93	SND_MAX dd ?
94		94
95	; congestion control	95	; congestion control
96	SND_CWND dd ? ; congestion window	96	SND_CWND dd ? ; congestion window
97	SND_SSTHRESH dd ? ; slow start threshold	97	SND_SSTHRESH dd ? ; slow start threshold
98		98
99	;----------------------	99	;----------------------
100	; Transmit timing stuff	100	; Transmit timing stuff
101	t_idle dd ?	101	t_idle dd ?
102	t_rtt dd ? ; round trip time	102	t_rtt dd ? ; round trip time
103	t_rtseq dd ?	103	t_rtseq dd ?
104	t_srtt dd ? ; smoothed round trip time	104	t_srtt dd ? ; smoothed round trip time
105	t_rttvar dd ?	105	t_rttvar dd ?
106	t_rttmin dd ?	106	t_rttmin dd ?
107	max_sndwnd dd ?	107	max_sndwnd dd ?
108		108
109	;-----------------	109	;-----------------
110	; Out-of-band data	110	; Out-of-band data
111	t_oobflags dd ?	111	t_oobflags dd ?
112	t_iobc dd ?	112	t_iobc dd ?
113	t_softerror dd ?	113	t_softerror dd ?
114		114
115		115
116	;---------	116	;---------
117	; RFC 1323 ; the order of next 4 elements may not change	117	; RFC 1323 ; the order of next 4 elements may not change
118		118
119	SND_SCALE db ?	119	SND_SCALE db ?
120	RCV_SCALE db ?	120	RCV_SCALE db ?
121	requested_s_scale db ?	121	requested_s_scale db ?
122	request_r_scale db ?	122	request_r_scale db ?
123		123
124	ts_recent dd ? ; a copy of the most-recent valid timestamp from the other end	124	ts_recent dd ? ; a copy of the most-recent valid timestamp from the other end
125	ts_recent_age dd ?	125	ts_recent_age dd ?
126	last_ack_sent dd ?	126	last_ack_sent dd ?
127		127
128		128
129	;-------	129	;-------
130	; Timers	130	; Timers
131	timer_flags dd ?	131	timer_flags dd ?
132	timer_retransmission dd ? ; rexmt	132	timer_retransmission dd ? ; rexmt
133	timer_persist dd ?	133	timer_persist dd ?
134	timer_keepalive dd ? ; keepalive/syn timeout	134	timer_keepalive dd ? ; keepalive/syn timeout
135	timer_timed_wait dd ? ; also used as 2msl timer	135	timer_timed_wait dd ? ; also used as 2msl timer
136	timer_connect dd ?	136	timer_connect dd ?
137		137
138	; extra	138	; extra
139		139
140	ts_ecr dd ? ; timestamp echo reply	140	ts_ecr dd ? ; timestamp echo reply
141	ts_val dd ?	141	ts_val dd ?
142		142
143	seg_next dd ? ; re-assembly queue	143	seg_next dd ? ; re-assembly queue
144		144
145	ends	145	ends
146		146
147	struct UDP_SOCKET IP_SOCKET	147	struct UDP_SOCKET IP_SOCKET
148		148
149	LocalPort dw ? ; in network byte order	149	LocalPort dw ? ; in network byte order
150	RemotePort dw ? ; in network byte order	150	RemotePort dw ? ; in network byte order
151		151
152	ends	152	ends
153		153
154	struct RING_BUFFER	154	struct RING_BUFFER
155		155
156	mutex MUTEX	156	mutex MUTEX
157	start_ptr dd ? ; Pointer to start of buffer	157	start_ptr dd ? ; Pointer to start of buffer
158	end_ptr dd ? ; pointer to end of buffer	158	end_ptr dd ? ; pointer to end of buffer
159	read_ptr dd ? ; Read pointer	159	read_ptr dd ? ; Read pointer
160	write_ptr dd ? ; Write pointer	160	write_ptr dd ? ; Write pointer
161	size dd ? ; Number of bytes buffered	161	size dd ? ; Number of bytes buffered
162		162
163	ends	163	ends
164		164
165	struct STREAM_SOCKET TCP_SOCKET	165	struct STREAM_SOCKET TCP_SOCKET
166		166
167	rcv RING_BUFFER	167	rcv RING_BUFFER
168	snd RING_BUFFER	168	snd RING_BUFFER
169		169
170	ends	170	ends
171		171
172	struct socket_queue_entry	172	struct socket_queue_entry
173		173
174	data_ptr dd ?	174	data_ptr dd ?
175	data_size dd ?	175	data_size dd ?
176	buf_ptr dd ?	176	buf_ptr dd ?
177		177
178	ends	178	ends
179		179
180	struct socket_options	180	struct socket_options
181		181
182	level dd ?	182	level dd ?
183	optname dd ?	183	optname dd ?
184	optlen dd ?	184	optlen dd ?
185	optval dd ?	185	optval dd ?
186		186
187	ends	187	ends
188		188
189	SOCKET_STRUCT_SIZE = 4096 ; in bytes	189	SOCKET_STRUCT_SIZE = 4096 ; in bytes
190		190
191	SOCKET_QUEUE_SIZE = 10 ; maximum number of incoming packets queued for 1 socket	191	SOCKET_QUEUE_SIZE = 10 ; maximum number of incoming packets queued for 1 socket
192	; the incoming packet queue for sockets is placed in the socket struct itself, at this location from start	192	; the incoming packet queue for sockets is placed in the socket struct itself, at this location from start
193	SOCKET_QUEUE_LOCATION = (SOCKET_STRUCT_SIZE - SOCKET_QUEUE_SIZE*sizeof.socket_queue_entry - sizeof.queue)	193	SOCKET_QUEUE_LOCATION = (SOCKET_STRUCT_SIZE - SOCKET_QUEUE_SIZE*sizeof.socket_queue_entry - sizeof.queue)
194		194
195	uglobal	195	uglobal
196	align 4	196	align 4
197		197
198	net_sockets rd 4	198	net_sockets rd 4
199	last_socket_num dd ?	199	last_socket_num dd ?
200	last_UDP_port dw ? ; last used ephemeral port	200	last_UDP_port dw ? ; last used ephemeral port
201	last_TCP_port dw ? ;	201	last_TCP_port dw ? ;
202	socket_mutex MUTEX	202	socket_mutex MUTEX
203		203
204	endg	204	endg
205		205
206		206
207	;-----------------------------------------------------------------;	207	;-----------------------------------------------------------------;
208	; ;	208	; ;
209	; socket_init ;	209	; socket_init ;
210	; ;	210	; ;
211	;-----------------------------------------------------------------;	211	;-----------------------------------------------------------------;
212	macro socket_init {	212	macro socket_init {
213		213
214	xor eax, eax	214	xor eax, eax
215	mov edi, net_sockets	215	mov edi, net_sockets
216	mov ecx, 5	216	mov ecx, 5
217	rep stosd	217	rep stosd
218		218
219	@@:	219	@@:
220	pseudo_random eax	220	pseudo_random eax
221	cmp ax, EPHEMERAL_PORT_MIN	221	cmp ax, EPHEMERAL_PORT_MIN
222	jb @r	222	jb @r
223	cmp ax, EPHEMERAL_PORT_MAX	223	cmp ax, EPHEMERAL_PORT_MAX
224	ja @r	224	ja @r
225	xchg al, ah	225	xchg al, ah
226	mov [last_UDP_port], ax	226	mov [last_UDP_port], ax
227		227
228	@@:	228	@@:
229	pseudo_random eax	229	pseudo_random eax
230	cmp ax, EPHEMERAL_PORT_MIN	230	cmp ax, EPHEMERAL_PORT_MIN
231	jb @r	231	jb @r
232	cmp ax, EPHEMERAL_PORT_MAX	232	cmp ax, EPHEMERAL_PORT_MAX
233	ja @r	233	ja @r
234	xchg al, ah	234	xchg al, ah
235	mov [last_TCP_port], ax	235	mov [last_TCP_port], ax
236		236
237	mov ecx, socket_mutex	237	mov ecx, socket_mutex
238	call mutex_init	238	call mutex_init
239		239
240	}	240	}
241		241
242	;-----------------------------------------------------------------;	242	;-----------------------------------------------------------------;
243	; ;	243	; ;
244	; Sockets API (system function 75) ;	244	; Sockets API (system function 75) ;
245	; ;	245	; ;
246	;-----------------------------------------------------------------;	246	;-----------------------------------------------------------------;
247	align 4	247	align 4
248	sys_socket:	248	sys_socket:
249		249
250	mov dword[esp+20], 0 ; Set error code to 0	250	mov dword[esp+20], 0 ; Set error code to 0
251		251
252	cmp ebx, 255	252	cmp ebx, 255
253	jz socket_debug	253	jz socket_debug
254		254
255	cmp ebx, .number	255	cmp ebx, .number
256	ja .error	256	ja .error
257	jmp dword [.table + 4*ebx]	257	jmp dword [.table + 4*ebx]
258		258
259	.table:	259	.table:
260	dd socket_open ; 0	260	dd socket_open ; 0
261	dd socket_close ; 1	261	dd socket_close ; 1
262	dd socket_bind ; 2	262	dd socket_bind ; 2
263	dd socket_listen ; 3	263	dd socket_listen ; 3
264	dd socket_connect ; 4	264	dd socket_connect ; 4
265	dd socket_accept ; 5	265	dd socket_accept ; 5
266	dd socket_send ; 6	266	dd socket_send ; 6
267	dd socket_receive ; 7	267	dd socket_receive ; 7
268	dd socket_set_opt ; 8	268	dd socket_set_opt ; 8
269	dd socket_get_opt ; 9	269	dd socket_get_opt ; 9
270	dd socket_pair ; 10	270	dd socket_pair ; 10
271	.number = ($ - .table) / 4 - 1	271	.number = ($ - .table) / 4 - 1
272		272
273	.error:	273	.error:
274	mov dword[esp+32], -1	274	mov dword[esp+32], -1
275	mov dword[esp+20], EINVAL	275	mov dword[esp+20], EINVAL
276		276
277	ret	277	ret
278		278
279	;-----------------------------------------------------------------;	279	;-----------------------------------------------------------------;
280	; ;	280	; ;
281	; socket_open: Create a new socket. ;	281	; socket_open: Create a new socket. ;
282	; ;	282	; ;
283	; IN: ecx = domain ;	283	; IN: ecx = domain ;
284	; edx = type ;	284	; edx = type ;
285	; esi = protocol ;	285	; esi = protocol ;
286	; ;	286	; ;
287	; OUT: eax = socket number ;	287	; OUT: eax = socket number ;
288	; eax = -1 on error ;	288	; eax = -1 on error ;
289	; ebx = errorcode on error ;	289	; ebx = errorcode on error ;
290	; ;	290	; ;
291	;-----------------------------------------------------------------;	291	;-----------------------------------------------------------------;
292	align 4	292	align 4
293	socket_open:	293	socket_open:
294		294
295	DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_open: domain=%u type=%u protocol=%x ", ecx, edx, esi	295	DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_open: domain=%u type=%u protocol=%x ", ecx, edx, esi
296		296
297	push ecx edx esi	297	push ecx edx esi
298	call socket_alloc	298	call socket_alloc
299	pop esi edx ecx	299	pop esi edx ecx
300	test eax, eax	300	test eax, eax
301	jz .nobuffs	301	jz .nobuffs
302		302
303	mov [esp+32], edi ; return socketnumber	303	mov [esp+32], edi ; return socketnumber
304	DEBUGF DEBUG_NETWORK_VERBOSE, "socknum=%u\n", edi	304	DEBUGF DEBUG_NETWORK_VERBOSE, "socknum=%u\n", edi
305		305
306	test edx, SO_NONBLOCK	306	test edx, SO_NONBLOCK
307	jz @f	307	jz @f
308	or [eax + SOCKET.options], SO_NONBLOCK	308	or [eax + SOCKET.options], SO_NONBLOCK
309	and edx, not SO_NONBLOCK	309	and edx, not SO_NONBLOCK
310	@@:	310	@@:
311		311
312	mov [eax + SOCKET.Domain], ecx	312	mov [eax + SOCKET.Domain], ecx
313	mov [eax + SOCKET.Type], edx	313	mov [eax + SOCKET.Type], edx
314	mov [eax + SOCKET.Protocol], esi	314	mov [eax + SOCKET.Protocol], esi
315	mov [eax + SOCKET.connect_proc], connect_notsupp	315	mov [eax + SOCKET.connect_proc], connect_notsupp
316		316
317	cmp ecx, AF_INET4	317	cmp ecx, AF_INET4
318	jne .no_inet4	318	jne .no_inet4
319		319
320	mov [eax + IP_SOCKET.ttl], 128	320	mov [eax + IP_SOCKET.ttl], 128
321		321
322	cmp edx, SOCK_DGRAM	322	cmp edx, SOCK_DGRAM
323	je .udp	323	je .udp
324		324
325	cmp edx, SOCK_STREAM	325	cmp edx, SOCK_STREAM
326	je .tcp	326	je .tcp
327		327
328	cmp edx, SOCK_RAW	328	cmp edx, SOCK_RAW
329	je .raw	329	je .raw
330		330
331	.no_inet4:	331	.no_inet4:
332	cmp ecx, AF_PPP	332	cmp ecx, AF_PPP
333	jne .no_ppp	333	jne .no_ppp
334		334
335	cmp esi, PPP_PROTO_ETHERNET	335	cmp esi, PPP_PROTO_ETHERNET
336	je .pppoe	336	je .pppoe
337		337
338	.no_ppp:	338	.no_ppp:
339	.unsupported:	339	.unsupported:
340	push eax	340	push eax
341	call socket_free	341	call socket_free
342	pop eax	342	pop eax
343	mov dword[esp+20], EOPNOTSUPP	343	mov dword[esp+20], EOPNOTSUPP
344	mov dword[esp+32], -1	344	mov dword[esp+32], -1
345	ret	345	ret
346		346
347	.nobuffs:	347	.nobuffs:
348	mov dword[esp+20], ENOBUFS	348	mov dword[esp+20], ENOBUFS
349	mov dword[esp+32], -1	349	mov dword[esp+32], -1
350	ret	350	ret
351		351
352	.raw:	352	.raw:
353	test esi, esi ; IP_PROTO_IP	353	test esi, esi ; IP_PROTO_IP
354	jz .raw_ip	354	jz .raw_ip
355		355
356	cmp esi, IP_PROTO_ICMP	356	cmp esi, IP_PROTO_ICMP
357	je .raw_icmp	357	je .raw_icmp
358		358
359	jmp .unsupported	359	jmp .unsupported
360		360
361	align 4	361	align 4
362	.udp:	362	.udp:
363	push eax	363	push eax
364	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue	364	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue
365	pop eax	365	pop eax
366		366
367	mov [eax + SOCKET.Protocol], IP_PROTO_UDP	367	mov [eax + SOCKET.Protocol], IP_PROTO_UDP
368	mov [eax + SOCKET.snd_proc], socket_send_udp	368	mov [eax + SOCKET.snd_proc], socket_send_udp
369	mov [eax + SOCKET.rcv_proc], socket_receive_dgram	369	mov [eax + SOCKET.rcv_proc], socket_receive_dgram
370	mov [eax + SOCKET.connect_proc], udp_connect	370	mov [eax + SOCKET.connect_proc], udp_connect
371	ret	371	ret
372		372
373	align 4	373	align 4
374	.tcp:	374	.tcp:
375	mov [eax + SOCKET.Protocol], IP_PROTO_TCP	375	mov [eax + SOCKET.Protocol], IP_PROTO_TCP
376	mov [eax + SOCKET.snd_proc], socket_send_tcp	376	mov [eax + SOCKET.snd_proc], socket_send_tcp
377	mov [eax + SOCKET.rcv_proc], socket_receive_stream	377	mov [eax + SOCKET.rcv_proc], socket_receive_stream
378	mov [eax + SOCKET.connect_proc], tcp_connect	378	mov [eax + SOCKET.connect_proc], tcp_connect
379		379
380	tcp_init_socket eax	380	tcp_init_socket eax
381	ret	381	ret
382		382
383		383
384	align 4	384	align 4
385	.raw_ip:	385	.raw_ip:
386	push eax	386	push eax
387	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue	387	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue
388	pop eax	388	pop eax
389		389
390	mov [eax + SOCKET.snd_proc], socket_send_ip	390	mov [eax + SOCKET.snd_proc], socket_send_ip
391	mov [eax + SOCKET.rcv_proc], socket_receive_dgram	391	mov [eax + SOCKET.rcv_proc], socket_receive_dgram
392	mov [eax + SOCKET.connect_proc], ipv4_connect	392	mov [eax + SOCKET.connect_proc], ipv4_connect
393	ret	393	ret
394		394
395		395
396	align 4	396	align 4
397	.raw_icmp:	397	.raw_icmp:
398	push eax	398	push eax
399	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue	399	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue
400	pop eax	400	pop eax
401		401
402	mov [eax + SOCKET.snd_proc], socket_send_icmp	402	mov [eax + SOCKET.snd_proc], socket_send_icmp
403	mov [eax + SOCKET.rcv_proc], socket_receive_dgram	403	mov [eax + SOCKET.rcv_proc], socket_receive_dgram
404	mov [eax + SOCKET.connect_proc], ipv4_connect	404	mov [eax + SOCKET.connect_proc], ipv4_connect
405	ret	405	ret
406		406
407	align 4	407	align 4
408	.pppoe:	408	.pppoe:
409	push eax	409	push eax
410	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue	410	init_queue (eax + SOCKET_QUEUE_LOCATION) ; Set up data receiving queue
411	pop eax	411	pop eax
412		412
413	mov [eax + SOCKET.snd_proc], socket_send_pppoe	413	mov [eax + SOCKET.snd_proc], socket_send_pppoe
414	mov [eax + SOCKET.rcv_proc], socket_receive_dgram	414	mov [eax + SOCKET.rcv_proc], socket_receive_dgram
415	ret	415	ret
416		416
417		417
418	;-----------------------------------------------------------------;	418	;-----------------------------------------------------------------;
419	; ;	419	; ;
420	; socket_bind: Bind to a local port. ;	420	; socket_bind: Bind to a local port. ;
421	; ;	421	; ;
422	; IN: ecx = socket number ;	422	; IN: ecx = socket number ;
423	; edx = pointer to sockaddr struct ;	423	; edx = pointer to sockaddr struct ;
424	; esi = length of sockaddr struct ;	424	; esi = length of sockaddr struct ;
425	; ;	425	; ;
426	; OUT: eax = 0 on success ;	426	; OUT: eax = 0 on success ;
427	; eax = -1 on error ;	427	; eax = -1 on error ;
428	; ebx = errorcode on error ;	428	; ebx = errorcode on error ;
429	; ;	429	; ;
430	;-----------------------------------------------------------------;	430	;-----------------------------------------------------------------;
431	align 4	431	align 4
432	socket_bind:	432	socket_bind:
433		433
434	DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_bind: socknum=%u sockaddr=%x length=%u\n", ecx, edx, esi	434	DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_bind: socknum=%u sockaddr=%x length=%u\n", ecx, edx, esi
435		435
436	call socket_num_to_ptr	436	call socket_num_to_ptr
437	test eax, eax	437	test eax, eax
438	jz .invalid	438	jz .invalid
439		439
440	cmp esi, 2	440	cmp esi, 2
441	jb .invalid	441	jb .invalid
442		442
443	cmp [eax + UDP_SOCKET.LocalPort], 0 ; Socket can only be bound once	443	cmp [eax + UDP_SOCKET.LocalPort], 0 ; Socket can only be bound once
444	jnz .invalid	444	jnz .invalid
445		445
446	cmp word[edx], AF_INET4	446	cmp word[edx], AF_INET4
447	je .af_inet4	447	je .af_inet4
448		448
449	cmp word[edx], AF_LOCAL	449	cmp word[edx], AF_LOCAL
450	je .af_local	450	je .af_local
451		451
452	.notsupp:	452	.notsupp:
453	mov dword[esp+20], EOPNOTSUPP	453	mov dword[esp+20], EOPNOTSUPP
454	mov dword[esp+32], -1	454	mov dword[esp+32], -1
455	ret	455	ret
456		456
457	.invalid:	457	.invalid:
458	mov dword[esp+20], EINVAL	458	mov dword[esp+20], EINVAL
459	mov dword[esp+32], -1	459	mov dword[esp+32], -1
460	ret	460	ret
461		461
462	.af_local:	462	.af_local:
463	; TODO: write code here	463	; TODO: write code here
464	mov dword[esp+32], 0	464	mov dword[esp+32], 0
465	ret	465	ret
466		466
467	.af_inet4:	467	.af_inet4:
468	cmp esi, 6	468	cmp esi, 6
469	jb .invalid	469	jb .invalid
470		470
471	cmp [eax + SOCKET.Protocol], IP_PROTO_UDP	471	cmp [eax + SOCKET.Protocol], IP_PROTO_UDP
472	je .udp	472	je .udp
473		473
474	cmp [eax + SOCKET.Protocol], IP_PROTO_TCP	474	cmp [eax + SOCKET.Protocol], IP_PROTO_TCP
475	je .tcp	475	je .tcp
476		476
477	jmp .notsupp	477	jmp .notsupp
478		478
479	.tcp:	479	.tcp:
480	.udp:	480	.udp:
481	pushd [edx + 4] ; First, fill in the IP	481	pushd [edx + 4] ; First, fill in the IP
482	popd [eax + IP_SOCKET.LocalIP]	482	popd [eax + IP_SOCKET.LocalIP]
483		483
484	mov bx, [edx + 2] ; Did caller specify a local port?	484	mov bx, [edx + 2] ; Did caller specify a local port?
485	test bx, bx	485	test bx, bx
486	jnz .just_check	486	jnz .just_check
487	call socket_find_port ; Nope, find an ephemeral one	487	call socket_find_port ; Nope, find an ephemeral one
488	jmp .done	488	jmp .done
489		489
490	.just_check:	490	.just_check:
491	call socket_check_port ; Yes, check if it's still available	491	call socket_check_port ; Yes, check if it's still available
492	jz .addrinuse ; ZF is set by socket_check_port on error	492	jz .addrinuse ; ZF is set by socket_check_port on error
493		493
494	.done:	494	.done:
495	DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_bind: local ip=%u.%u.%u.%u\n",\	495	DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_bind: local ip=%u.%u.%u.%u\n",\
496	[eax + IP_SOCKET.LocalIP + 0]:1,[eax + IP_SOCKET.LocalIP + 1]:1,\	496	[eax + IP_SOCKET.LocalIP + 0]:1,[eax + IP_SOCKET.LocalIP + 1]:1,\
497	[eax + IP_SOCKET.LocalIP + 2]:1,[eax + IP_SOCKET.LocalIP + 3]:1	497	[eax + IP_SOCKET.LocalIP + 2]:1,[eax + IP_SOCKET.LocalIP + 3]:1
498		498
499	mov dword[esp+32], 0	499	mov dword[esp+32], 0
500	ret	500	ret

Subversion Repositories Kolibri OS

(root)/kernel/trunk/network/socket.inc – Rev 7678 → 7679