WebSVN – Kolibri OS – Diff – /kernel/branches/Kolibri-acpi/kernel.asm


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Copyright (C) KolibriOS team 2004-2016. All rights reserved.
;; PROGRAMMING:
;; Ivan Poddubny
;; Marat Zakiyanov (Mario79)
;; VaStaNi
;; Trans
;; Mihail Semenyako (mike.dld)
;; Sergey Kuzmin (Wildwest)
;; Andrey Halyavin (halyavin)
;; Mihail Lisovin (Mihasik)
;; Andrey Ignatiev (andrew_programmer)
;; NoName
;; Evgeny Grechnikov (Diamond)
;; Iliya Mihailov (Ghost)
;; Sergey Semyonov (Serge)
;; Johnny_B
;; SPraid (simba)
;; Hidnplayr
;; Alexey Teplov ()
;; Rus
;; Nable
;; shurf
;; Alver
;; Maxis
;; Galkov
;; CleverMouse
;; tsdima
;; turbanoff
;; Asper
;; art_zh
;;
;; Data in this file was originally part of MenuetOS project which is
;; distributed under the terms of GNU GPL. It is modified and redistributed as
;; part of KolibriOS project under the terms of GNU GPL.
;;
;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa
;; PROGRAMMING:
;;
;; Ville Mikael Turjanmaa, villemt@itu.jyu.fi
;; - main os coding/design
;; Jan-Michael Brummer, BUZZ2@gmx.de
;; Felix Kaiser, info@felix-kaiser.de
;; Paolo Minazzi, paolo.minazzi@inwind.it
;; quickcode@mail.ru
;; Alexey, kgaz@crosswinds.net
;; Juan M. Caravaca, bitrider@wanadoo.es
;; kristol@nic.fi
;; Mike Hibbett, mikeh@oceanfree.net
;; Lasse Kuusijarvi, kuusijar@lut.fi
;; Jarek Pelczar, jarekp3@wp.pl
;;
;; KolibriOS is distributed in the hope that it will be useful, but WITHOUT ANY
;; WARRANTY. No author or distributor accepts responsibility to anyone for the
;; consequences of using it or for whether it serves any particular purpose or
;; works at all, unless he says so in writing. Refer to the GNU General Public
;; License (the "GPL") for full details.
;
;; Everyone is granted permission to copy, modify and redistribute KolibriOS,
;; but only under the conditions described in the GPL. A copy of this license
;; is supposed to have been given to you along with KolibriOS so you can know
;; your rights and responsibilities. It should be in a file named COPYING.
;; Among other things, the copyright notice and this notice must be preserved
;; on all copies.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
format binary as "mnt"
 
include 'macros.inc'
include 'struct.inc'
 
$Revision: 6311 $
 
 
USE_COM_IRQ     equ 1      ; make irq 3 and irq 4 available for PCI devices
VESA_1_2_VIDEO  equ 0      ; enable vesa 1.2 bank switch functions
 
; Enabling the next line will enable serial output console
;debug_com_base  equ 0x3f8  ; 0x3f8 is com1, 0x2f8 is com2, 0x3e8 is com3, 0x2e8 is com4, no irq's are used
 
include "proc32.inc"
include "kglobals.inc"
include "lang.inc"
include "encoding.inc"
 
include "const.inc"
 
iglobal
; The following variable, if equal to 1, duplicates debug output to the screen.
debug_direct_print db 0
; Start the first app (LAUNCHER) after kernel is loaded? (1=yes, 2 or 0=no)
launcher_start db 1
endg
 
max_processes    equ   255
tss_step         equ   (128+8192) ; tss & i/o - 65535 ports, * 256=557056*4
 
os_stack       equ  (os_data_l-gdts)    ; GDTs
os_code        equ  (os_code_l-gdts)
graph_data     equ  (3+graph_data_l-gdts)
tss0           equ  (tss0_l-gdts)
app_code       equ  (3+app_code_l-gdts)
app_data       equ  (3+app_data_l-gdts)
app_tls        equ  (3+tls_data_l-gdts)
pci_code_sel   equ  (pci_code_32-gdts)
pci_data_sel   equ  (pci_data_32-gdts)
 
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;   Included files:
;;
;;   Kernel16.inc
;;    - Booteng.inc   English text for bootup
;;    - Bootcode.inc  Hardware setup
;;    - Pci16.inc     PCI functions
;;
;;   Kernel32.inc
;;    - Sys32.inc     Process management
;;    - Shutdown.inc  Shutdown and restart
;;    - Fat32.inc     Read / write hd
;;    - Vesa12.inc    Vesa 1.2 driver
;;    - Vesa20.inc    Vesa 2.0 driver
;;    - Vga.inc       VGA driver
;;    - Stack.inc     Network interface
;;    - Mouse.inc     Mouse pointer
;;    - Scincode.inc  Window skinning
;;    - Pci32.inc     PCI functions
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                      ;;
;;                  16 BIT ENTRY FROM BOOTSECTOR                        ;;
;;                                                                      ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
use16
                  org   0x0
        jmp     start_of_code
 
if lang eq sp
include "kernelsp.inc"  ; spanish kernel messages
else if lang eq et
version db    'Kolibri OS  versioon 0.7.7.0+    ',13,10,13,10,0
else
version db    'Kolibri OS  version 0.7.7.0+     ',13,10,13,10,0
end if
 
include "boot/bootstr.inc"     ; language-independent boot messages
include "boot/preboot.inc"
 
if lang eq ge
include "boot/bootge.inc"     ; german system boot messages
else if lang eq sp
include "boot/bootsp.inc"     ; spanish system boot messages
else if lang eq ru
include "boot/bootru.inc"      ; russian system boot messages
include "boot/ru.inc"          ; Russian font
else if lang eq et
include "boot/bootet.inc"      ; estonian system boot messages
include "boot/et.inc"          ; Estonian font
else
include "boot/booten.inc"      ; english system boot messages
end if
 
include "boot/bootcode.inc"    ; 16 bit system boot code
include "bus/pci/pci16.inc"
include "detect/biosdisk.inc"
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                      ;;
;;                  SWITCH TO 32 BIT PROTECTED MODE                     ;;
;;                                                                      ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 
; CR0 Flags - Protected mode and Paging
 
        mov     ecx, CR0_PE
 
; Enabling 32 bit protected mode
 
        sidt    [cs:old_ints_h]
 
        cli                             ; disable all irqs
        cld
        mov     al, 255                 ; mask all irqs
        out     0xa1, al
        out     0x21, al
   l.5:
        in      al, 0x64                ; Enable A20
        test    al, 2
        jnz     l.5
        mov     al, 0xD1
        out     0x64, al
   l.6:
        in      al, 0x64
        test    al, 2
        jnz     l.6
        mov     al, 0xDF
        out     0x60, al
   l.7:
        in      al, 0x64
        test    al, 2
        jnz     l.7
        mov     al, 0xFF
        out     0x64, al
 
        lgdt    [cs:tmp_gdt]            ; Load GDT
        mov     eax, cr0                ; protected mode
        or      eax, ecx
        and     eax, 10011111b *65536*256 + 0xffffff ; caching enabled
        mov     cr0, eax
        jmp     pword os_code:B32       ; jmp to enable 32 bit mode
 
align 8
tmp_gdt:
 
        dw     23
        dd     tmp_gdt+0x10000
        dw     0
 
        dw     0xffff
        dw     0x0000
        db     0x00
        dw     11011111b *256 +10011010b
        db     0x00
 
        dw     0xffff
        dw     0x0000
        db     0x00
        dw     11011111b *256 +10010010b
        db     0x00
 
include "data16.inc"
 
if ~ lang eq sp
diff16 "end of bootcode",0,$+0x10000
end if
 
use32
org $+0x10000
 
align 4
B32:
        mov     ax, os_stack       ; Selector for os
        mov     ds, ax
        mov     es, ax
        mov     fs, ax
        mov     gs, ax
        mov     ss, ax
        mov     esp, TMP_STACK_TOP       ; Set stack
 
; CLEAR 0x280000 - HEAP_BASE
 
        xor     eax, eax
        mov     edi, CLEAN_ZONE
        mov     ecx, (HEAP_BASE-OS_BASE-CLEAN_ZONE) / 4
        cld
        rep stosd
 
; CLEAR KERNEL UNDEFINED GLOBALS
        mov     edi, endofcode-OS_BASE
        mov     ecx, 0x90000
        sub     ecx, edi
        shr     ecx, 2
        rep stosd
 
; SAVE & CLEAR 0-0xffff
 
        mov     edi, 0x1000
        mov     ecx, 0x8000 / 4
        rep stosd
        mov     edi, 0xa000
        mov     ecx, 0x6000 / 4
        rep stosd
 
        call    test_cpu
        bts     [cpu_caps-OS_BASE], CAPS_TSC    ;force use rdtsc
 
        call    check_acpi
        call    init_hpet
        call    init_BIOS32
; MEMORY MODEL
        call    mem_test
        call    init_mem
        call    init_page_map
 
; ENABLE PAGING
 
        mov     eax, sys_proc-OS_BASE+PROC.pdt_0
        mov     cr3, eax
 
        mov     eax, cr0
        or      eax, CR0_PG+CR0_WP
        mov     cr0, eax
 
        lgdt    [gdts]
        jmp     pword os_code:high_code
 
align 4
bios32_entry    dd ?
tmp_page_tabs   dd ?
use16
ap_init16:
        cli
        lgdt    [cs:gdts_ap-ap_init16]
        mov     eax, [cs:cr3_ap-ap_init16]
        mov     cr3, eax
        mov     eax, [cs:cr4_ap-ap_init16]
        mov     cr4, eax
        mov     eax, CR0_PE+CR0_PG+CR0_WP
        mov     cr0, eax
        jmp     pword os_code:ap_init_high
align 16
gdts_ap:
        dw     gdte-gdts-1
        dd     gdts
        dw     0
cr3_ap  dd     ?
cr4_ap  dd     ?
ap_init16_size = $ - ap_init16
use32
 
__DEBUG__ fix 1
__DEBUG_LEVEL__ fix 1
include 'init.inc'
 
org OS_BASE+$
 
include 'fdo.inc'
 
align 4
high_code:
        mov     ax, os_stack
        mov     bx, app_data
        mov     cx, app_tls
        mov     ss, ax
        add     esp, OS_BASE
 
        mov     ds, bx
        mov     es, bx
        mov     fs, cx
        mov     gs, bx
 
        xor     eax, eax
        mov     ebx, 0xFFFFF000+PG_SHARED+PG_NOCACHE+PG_UWR
        bt      [cpu_caps], CAPS_PAT
        setc    al
        shl     eax, 7
        or      ebx, eax
 
        mov     eax, PG_GLOBAL
        bt      [cpu_caps], CAPS_PGE
        jnc     @F
 
        or      [sys_proc+PROC.pdt_0+(OS_BASE shr 20)], eax
        or      ebx, eax
 
        mov     eax, cr4
        or      eax, CR4_PGE
        mov     cr4, eax
@@:
        mov     [pte_valid_mask], ebx
 
        xor     eax, eax
        mov     dword [sys_proc+PROC.pdt_0], eax
        mov     dword [sys_proc+PROC.pdt_0+4], eax
 
        mov     eax, cr3
        mov     cr3, eax          ; flush TLB
 
        mov     ecx, pg_data.mutex
        call    mutex_init
 
        mov     ecx, disk_list_mutex
        call    mutex_init
 
        mov     ecx, keyboard_list_mutex
        call    mutex_init
 
        mov     ecx, unpack_mutex
        call    mutex_init
 
        mov     ecx, application_table_mutex
        call    mutex_init
 
        mov     ecx, ide_mutex
        call    mutex_init
        mov     ecx, ide_channel1_mutex
        call    mutex_init
        mov     ecx, ide_channel2_mutex
        call    mutex_init
        mov     ecx, ide_channel3_mutex
        call    mutex_init
        mov     ecx, ide_channel4_mutex
        call    mutex_init
        mov     ecx, ide_channel5_mutex
        call    mutex_init
        mov     ecx, ide_channel6_mutex
        call    mutex_init
;-----------------------------------------------------------------------------
; SAVE REAL MODE VARIABLES
;-----------------------------------------------------------------------------
; --------------- APM ---------------------
 
; init selectors
        mov     ebx, [BOOT_VARS+BOOT_APM_ENTRY]        ; offset of APM entry point
        movzx   eax, word [BOOT_VARS+BOOT_APM_CODE_32] ; real-mode segment base address of
                                                                                ; protected-mode 32-bit code segment
        movzx   ecx, word [BOOT_VARS+BOOT_APM_CODE_16]; real-mode segment base address of
                                                                                ; protected-mode 16-bit code segment
        movzx   edx, word [BOOT_VARS+BOOT_APM_DATA_16]; real-mode segment base address of
                                                                                ; protected-mode 16-bit data segment
 
        shl     eax, 4
        mov     [dword apm_code_32 + 2], ax
        shr     eax, 16
        mov     [dword apm_code_32 + 4], al
 
        shl     ecx, 4
        mov     [dword apm_code_16 + 2], cx
        shr     ecx, 16
        mov     [dword apm_code_16 + 4], cl
 
        shl     edx, 4
        mov     [dword apm_data_16 + 2], dx
        shr     edx, 16
        mov     [dword apm_data_16 + 4], dl
 
        mov     dword[apm_entry], ebx
        mov     word [apm_entry + 4], apm_code_32 - gdts
 
        mov     eax, [BOOT_VARS + BOOT_APM_VERSION] ; version & flags
        mov     [apm_vf], eax
; -----------------------------------------
        mov     al, [BOOT_VARS+BOOT_DMA]            ; DMA access
        mov     [allow_dma_access], al
 
        mov     al, [BOOT_VARS+BOOT_DEBUG_PRINT]    ; If nonzero, duplicates debug output to the screen
        mov     [debug_direct_print], al
 
        mov     al, [BOOT_VARS+BOOT_LAUNCHER_START] ; Start the first app (LAUNCHER) after kernel is loaded?
        mov     [launcher_start], al
 
        mov     esi, BOOT_VARS+0x9080
        movzx   ecx, byte [esi-1]
        mov     [NumBiosDisks], ecx
        mov     edi, BiosDisksData
        rep movsd
 
; -------- Fast System Call init ----------
; Intel SYSENTER/SYSEXIT (AMD CPU support it too)
        bt      [cpu_caps], CAPS_SEP
        jnc     .SEnP  ; SysEnter not Present
        xor     edx, edx
        mov     ecx, MSR_SYSENTER_CS
        mov     eax, os_code
        wrmsr
        mov     ecx, MSR_SYSENTER_ESP
;           mov eax, sysenter_stack ; Check it
        xor     eax, eax
        wrmsr
        mov     ecx, MSR_SYSENTER_EIP
        mov     eax, sysenter_entry
        wrmsr
.SEnP:
; AMD SYSCALL/SYSRET
        cmp     byte[cpu_vendor], 'A'
        jne     .noSYSCALL
        mov     eax, 0x80000001
        cpuid
        test    edx, 0x800  ; bit_11 - SYSCALL/SYSRET support
        jz      .noSYSCALL
        mov     ecx, MSR_AMD_EFER
        rdmsr
        or      eax, 1 ; bit_0 - System Call Extension (SCE)
        wrmsr
 
        ; !!!! It`s dirty hack, fix it !!!
        ; Bits of EDX :
        ; Bit 31–16 During the SYSRET instruction, this field is copied into the CS register
        ;  and the contents of this field, plus 8, are copied into the SS register.
        ; Bit 15–0 During the SYSCALL instruction, this field is copied into the CS register
        ;  and the contents of this field, plus 8, are copied into the SS register.
 
        ; mov   edx, (os_code + 16) * 65536 + os_code
        mov     edx, 0x1B0008
 
        mov     eax, syscall_entry
        mov     ecx, MSR_AMD_STAR
        wrmsr
.noSYSCALL:
; -----------------------------------------
        stdcall alloc_page
        stdcall map_page, tss-0xF80, eax, PG_SWR
        stdcall alloc_page
        stdcall map_page, tss+0x80, eax, PG_SWR
        stdcall alloc_page
        stdcall map_page, tss+0x1080, eax, PG_SWR
 
; LOAD IDT
 
        call    build_interrupt_table ;lidt is executed
          ;lidt [idtreg]
 
        call    init_kernel_heap
        stdcall kernel_alloc, (RING0_STACK_SIZE+512) * 2
        mov     [os_stack_seg], eax
 
        lea     esp, [eax+RING0_STACK_SIZE]
 
        mov     [tss._ss0], os_stack
        mov     [tss._esp0], esp
        mov     [tss._esp], esp
        mov     [tss._cs], os_code
        mov     [tss._ss], os_stack
        mov     [tss._ds], app_data
        mov     [tss._es], app_data
        mov     [tss._fs], app_data
        mov     [tss._gs], app_data
        mov     [tss._io], 128
;Add IO access table - bit array of permitted ports
        mov     edi, tss._io_map_0
        xor     eax, eax
        not     eax
        mov     ecx, 8192/4
        rep stosd                           ; access to 4096*8=65536 ports
 
        mov     ax, tss0
        ltr     ax
 
        mov     eax, sys_proc
        list_init eax
        add     eax, PROC.thr_list
        list_init eax
 
        call    init_video
        call    init_mtrr
        mov     [LFBAddress], LFB_BASE
        mov     ecx, bios_fb
        call    set_framebuffer
        call    init_fpu
        call    init_malloc
 
        stdcall alloc_kernel_space, 0x50000         ; FIXME check size
        mov     [default_io_map], eax
 
        add     eax, 0x2000
        mov     [ipc_tmp], eax
        mov     ebx, 0x1000
 
        add     eax, 0x40000
        mov     [proc_mem_map], eax
 
        add     eax, 0x8000
        mov     [proc_mem_pdir], eax
 
        add     eax, ebx
        mov     [proc_mem_tab], eax
 
        add     eax, ebx
        mov     [tmp_task_ptab], eax
 
        add     eax, ebx
        mov     [ipc_pdir], eax
 
        add     eax, ebx
        mov     [ipc_ptab], eax
 
        stdcall kernel_alloc, (unpack.LZMA_BASE_SIZE+(unpack.LZMA_LIT_SIZE shl \
                (unpack.lc+unpack.lp)))*4
 
        mov     [unpack.p], eax
 
        call    init_events
        mov     eax, srv.fd-SRV.fd
        mov     [srv.fd], eax
        mov     [srv.bk], eax
 
;Set base of graphic segment to linear address of LFB
        mov     eax, [LFBAddress]         ; set for gs
        mov     [graph_data_l+2], ax
        shr     eax, 16
        mov     [graph_data_l+4], al
        mov     [graph_data_l+7], ah
 
        stdcall kernel_alloc, [_display.win_map_size]
        mov     [_display.win_map], eax
 
        xor     eax, eax
        inc     eax
 
; set background
 
        mov     [BgrDrawMode], eax
        mov     [BgrDataWidth], eax
        mov     [BgrDataHeight], eax
        mov     [mem_BACKGROUND], 4
        mov     [img_background], static_background_data
 
; set clipboard
 
        xor     eax, eax
        mov     [clipboard_slots], eax
        mov     [clipboard_write_lock], eax
        stdcall kernel_alloc, 4096
        test    eax, eax
        jnz     @f
 
        dec     eax
@@:
        mov     [clipboard_main_list], eax
 
        mov     eax, [hpet_base]
        test    eax, eax
        jz      @F
        mov     eax, [hpet_base]
        stdcall map_io_mem, [hpet_base], 1024, PG_GLOBAL+PAT_UC+PG_SWR
        mov     [hpet_base], eax
        mov     eax, [eax]
        DEBUGF  1, "K : HPET caps %x\n", eax
@@:
; SET UP OS TASK
 
        mov     esi, boot_setostask
        call    boot_log
 
        mov     edi, sys_proc+PROC.heap_lock
        mov     ecx, (PROC.ht_free-PROC.heap_lock)/4
 
        xor     eax, eax
        cld
        rep stosd
 
        mov     [edi], dword (PROC.pdt_0 - PROC.htab)/4 - 3
        mov     [edi+4], dword 3           ;reserve handles for stdin stdout and stderr
        mov     ecx, (PROC.pdt_0 - PROC.htab)/4
        add     edi, 8
        inc     eax
@@:
        stosd
        inc     eax
        cmp     eax, ecx
        jbe     @B
 
        mov     [sys_proc+PROC.pdt_0_phys], sys_proc-OS_BASE+PROC.pdt_0
 
        mov     eax, -1
        mov     edi, thr_slot_map+4
        mov     [edi-4], dword 0xFFFFFFF8
        stosd
        stosd
        stosd
        stosd
        stosd
        stosd
        stosd
 
        mov     [current_process], sys_proc
 
        mov     edx, SLOT_BASE+256*1
        mov     ebx, [os_stack_seg]
        add     ebx, 0x2000
        call    setup_os_slot
        mov     dword [edx], 'IDLE'
        sub     [edx+APPDATA.saved_esp], 4
        mov     eax, [edx+APPDATA.saved_esp]
        mov     dword [eax], idle_thread
        mov     ecx, IDLE_PRIORITY
        call    scheduler_add_thread
 
        mov     edx, SLOT_BASE+256*2
        mov     ebx, [os_stack_seg]
        call    setup_os_slot
        mov     dword [edx], 'OS'
        xor     ecx, ecx
        call    scheduler_add_thread
 
        mov     dword [CURRENT_TASK], 2
        mov     dword [TASK_COUNT], 2
        mov     dword [current_slot], SLOT_BASE + 256*2
        mov     dword [TASK_BASE], CURRENT_TASK + 32*2
 
; Move other CPUs to deep sleep, if it is useful
uglobal
use_mwait_for_idle db 0
endg
        cmp     [cpu_vendor+8], 'ntel'
        jnz     .no_wake_cpus
        bt      [cpu_caps+4], CAPS_MONITOR-32
        jnc     .no_wake_cpus
        dbgstr 'using mwait for idle loop'
        inc     [use_mwait_for_idle]
        mov     ebx, [cpu_count]
        cmp     ebx, 1
        jbe     .no_wake_cpus
        call    create_trampoline_pgmap
        mov     [cr3_ap+OS_BASE], eax
        mov     eax, cr4
        mov     [cr4_ap+OS_BASE], eax
        mov     esi, OS_BASE + ap_init16
        mov     edi, OS_BASE + 8000h
        mov     ecx, (ap_init16_size + 3) / 4
        rep movsd
        stdcall map_io_mem, [acpi_lapic_base], 0x1000, PG_GLOBAL+PG_NOCACHE+PG_SWR
        mov     [LAPIC_BASE], eax
        lea     edi, [eax+300h]
        mov     esi, smpt+4
        dec     ebx
.wake_cpus_loop:
        lodsd
        push    esi
        xor     esi, esi
        inc     esi
        shl     eax, 24
        mov     [edi+10h], eax
; assert INIT IPI
        mov     dword [edi], 0C500h
        call    delay_ms
@@:
        test    dword [edi], 1000h
        jnz     @b
; deassert INIT IPI
        mov     dword [edi], 8500h
        call    delay_ms
@@:
        test    dword [edi], 1000h
        jnz     @b
; send STARTUP IPI
        mov     dword [edi], 600h + (8000h shr 12)
        call    delay_ms
@@:
        test    dword [edi], 1000h
        jnz     @b
        pop     esi
        dec     ebx
        jnz     .wake_cpus_loop
        mov     eax, [cpu_count]
        dec     eax
@@:
        cmp     [ap_initialized], eax
        jnz     @b
        mov     eax, [cr3_ap+OS_BASE]
        call    free_page
.no_wake_cpus:
 
; REDIRECT ALL IRQ'S TO INT'S 0x20-0x2f
        mov     esi, boot_initirq
        call    boot_log
        call    init_irqs
 
        mov     esi, boot_picinit
        call    boot_log
        call    PIC_init
 
        mov     esi, boot_v86machine
        call    boot_log
; Initialize system V86 machine
        call    init_sys_v86
 
        mov     esi, boot_inittimer
        call    boot_log
; Initialize system timer (IRQ0)
        call    PIT_init
 
; Register ramdisk file system
        cmp     [boot_dev+OS_BASE+0x10000], 1
        je      @f
 
        call    register_ramdisk
;--------------------------------------
@@:
        mov     esi, boot_initapic
        call    boot_log
; Try to Initialize APIC
        call    APIC_init
 
        mov     esi, boot_enableirq
        call    boot_log
; Enable timer IRQ (IRQ0) and co-processor IRQ (IRQ13)
; they are used: when partitions are scanned, hd_read relies on timer
        call    unmask_timer
        stdcall enable_irq, 2               ; @#$%! PIC
        stdcall enable_irq, 13              ; co-processor
 
; Setup serial output console (if enabled)
if defined debug_com_base
 
        ; reserve port so nobody else will use it
        xor     ebx, ebx
        mov     ecx, debug_com_base
        mov     edx, debug_com_base+7
        call    r_f_port_area
 
        ; enable Divisor latch
        mov     dx, debug_com_base+3
        mov     al, 1 shl 7
        out     dx, al
 
        ; Set speed to 115200 baud (max speed)
        mov     dx, debug_com_base
        mov     al, 0x01
        out     dx, al
 
        mov     dx, debug_com_base+1
        mov     al, 0x00
        out     dx, al
 
        ; No parity, 8bits words, one stop bit, dlab bit back to 0
        mov     dx, debug_com_base+3
        mov     al, 3
        out     dx, al
 
        ; disable interrupts
        mov     dx, debug_com_base+1
        mov     al, 0
        out     dx, al
 
        ; clear +  enable fifo (64 bits)
        mov     dx, debug_com_base+2
        mov     al, 0x7 + 1 shl 5
        out     dx, al
 
end if
 
 
;-----------------------------------------------------------------------------
; show SVN version of kernel on the message board
;-----------------------------------------------------------------------------
        mov     eax, [version_inf.rev]
        DEBUGF  1, "K : kernel SVN r%d\n", eax
;-----------------------------------------------------------------------------
; show CPU count on the message board
;-----------------------------------------------------------------------------
        mov     eax, [cpu_count]
        test    eax, eax
        jnz     @F
        mov     al, 1                             ; at least one CPU
@@:
        DEBUGF  1, "K : %d CPU detected\n", eax
;-----------------------------------------------------------------------------
; detect Floppy drives
;-----------------------------------------------------------------------------
        mov     esi, boot_detectfloppy
        call    boot_log
include 'detect/dev_fd.inc'
;-----------------------------------------------------------------------------
; create pci-devices list
;-----------------------------------------------------------------------------
        mov     [pci_access_enabled], 1
        call    pci_enum
;-----------------------------------------------------------------------------
; initialisation IDE ATA code
;-----------------------------------------------------------------------------
include 'detect/init_ata.inc'
;-----------------------------------------------------------------------------
if 0
        mov     ax, [OS_BASE+0x10000+bx_from_load]
        cmp     ax, 'r1'; if using not ram disk, then load librares and parameters {SPraid.simba}
        je      no_lib_load
 
        mov     esi, boot_loadlibs
        call    boot_log
; LOADING LIBRARES
        stdcall dll.Load, @IMPORT           ; loading librares for kernel (.obj files)
        call    load_file_parse_table       ; prepare file parse table
        call    set_kernel_conf             ; configure devices and gui
no_lib_load:
end if
 
; Display APIC status
        mov     esi, boot_APIC_found
        cmp     [irq_mode], IRQ_APIC
        je      @f
        mov     esi, boot_APIC_nfound
@@:
        call    boot_log
 
; PRINT AMOUNT OF MEMORY
        mov     esi, boot_memdetect
        call    boot_log
 
        movzx   ecx, word [boot_y]
        if lang eq ru
        or      ecx, (10+30*6) shl 16
        else if lang eq sp
        or      ecx, (10+33*6) shl 16
        else
        or      ecx, (10+29*6) shl 16
        end if
        sub     ecx, 10
        mov     edx, 0xFFFFFF
        mov     ebx, [MEM_AMOUNT]
        shr     ebx, 20
        xor     edi, edi
        mov     eax, 0x00040000
        inc     edi
        call    display_number_force
 
; BUILD SCHEDULER
 
;        call    build_scheduler; sys32.inc
 
;        mov     esi, boot_devices
;        call    boot_log
 
include "detect/vortex86.inc"                     ; Vortex86 SoC detection code
 
        stdcall load_pe_driver, szVidintel, 0
 
        call    usb_init
 
; SET PRELIMINARY WINDOW STACK AND POSITIONS
 
        mov     esi, boot_windefs
        call    boot_log
        call    set_window_defaults
 
; SET BACKGROUND DEFAULTS
 
        mov     esi, boot_bgr
        call    boot_log
        call    init_background
        call    calculatebackground
 
; RESERVE SYSTEM IRQ'S JA PORT'S
 
        mov     esi, boot_resirqports
        call    boot_log
        call    reserve_irqs_ports
 
        call    init_display
        mov     eax, [def_cursor]
        mov     [SLOT_BASE+APPDATA.cursor+256], eax
        mov     [SLOT_BASE+APPDATA.cursor+256*2], eax
 
; PRINT CPU FREQUENCY
 
        mov     esi, boot_cpufreq
        call    boot_log
 
        cli
        mov     ebx, [hpet_base]
        test    ebx, ebx
        jz      @F
        mov     ebx, [ebx+0xF0]
 
        rdtsc
        mov     ecx, 1000
        sub     eax, [hpet_tsc_start]
        sbb     edx, [hpet_tsc_start+4]
        shld    edx, eax, 10
        shl     eax, 10
        mov     esi, eax
        mov     eax, edx
        mul     ecx
        xchg    eax, esi
        mul     ecx
        adc     edx, esi
        div     ebx
        mul     ecx
        div     [hpet_period]
        mul     ecx
        DEBUGF  1, "K : cpu frequency %u Hz\n", eax
        jmp     .next
@@:
        rdtsc
        mov     ecx, eax
        mov     esi, 250            ; wait 1/4 a second
        call    delay_ms
        rdtsc
        sti
 
        sub     eax, ecx
        xor     edx, edx
        shld    edx, eax, 2
        shl     eax, 2
.next:
        mov     dword [cpu_freq], eax
        mov     dword [cpu_freq+4], edx
        mov     ebx, 1000000
        div     ebx
        mov     ebx, eax
 
        movzx   ecx, word [boot_y]
        if lang eq ru
        add     ecx, (10+19*6) shl 16 - 10
        else if lang eq sp
        add     ecx, (10+25*6) shl 16 - 10
        else
        add     ecx, (10+17*6) shl 16 - 10
        end if
 
        mov     edx, 0xFFFFFF
        xor     edi, edi
        mov     eax, 0x00040000
        inc     edi
        call    display_number_force
 
; SET VARIABLES
 
        call    set_variables
 
; STACK AND FDC
 
        call    stack_init
        call    fdc_init
 
; PALETTE FOR 320x200 and 640x480 16 col
 
        cmp     [SCR_MODE], word 0x12
        jne     no_pal_vga
        mov     esi, boot_pal_vga
        call    boot_log
        call    paletteVGA
      no_pal_vga:
 
        cmp     [SCR_MODE], word 0x13
        jne     no_pal_ega
        mov     esi, boot_pal_ega
        call    boot_log
        call    palette320x200
      no_pal_ega:
 
; LOAD DEFAULT SKIN
 
        call    load_default_skin
 
; Protect I/O permission map
 
        mov     esi, [default_io_map]
        stdcall map_page, esi, [SLOT_BASE+256+APPDATA.io_map], PG_READ
        add     esi, 0x1000
        stdcall map_page, esi, [SLOT_BASE+256+APPDATA.io_map+4], PG_READ
 
        stdcall map_page, tss._io_map_0, \
                [SLOT_BASE+256+APPDATA.io_map], PG_READ
        stdcall map_page, tss._io_map_1, \
                [SLOT_BASE+256+APPDATA.io_map+4], PG_READ
 
; SET KEYBOARD PARAMETERS
        mov     al, 0xf6       ; reset keyboard, scan enabled
        call    kb_write_wait_ack
        test    ah, ah
        jnz     .no_keyboard
 
iglobal
align 4
ps2_keyboard_functions:
        dd      .end - $
        dd      0       ; no close
        dd      ps2_set_lights
.end:
endg
        stdcall register_keyboard, ps2_keyboard_functions, 0
       ; mov   al, 0xED       ; Keyboard LEDs - only for testing!
       ; call  kb_write_wait_ack
       ; mov   al, 111b
       ; call  kb_write_wait_ack
 
        mov     al, 0xF3     ; set repeat rate & delay
        call    kb_write_wait_ack
        mov     al, 0; 30 250 ;00100010b ; 24 500  ;00100100b  ; 20 500
        call    kb_write_wait_ack
     ;// mike.dld [
        call    set_lights
     ;// mike.dld ]
        stdcall attach_int_handler, 1, irq1, 0
        DEBUGF  1, "K : IRQ1 return code %x\n", eax
.no_keyboard:
 
; Load PS/2 mouse driver
 
        stdcall load_pe_driver, szPS2MDriver, 0
 
        mov     esi, boot_setmouse
        call    boot_log
        call    setmouse
 
; LOAD FIRST APPLICATION
        cmp     byte [launcher_start], 1        ; Check if starting LAUNCHER is selected on blue screen (1 = yes)
        jnz     first_app_found
 
        cli
        mov     ebp, firstapp
        call    fs_execute_from_sysdir
        test    eax, eax
        jns     first_app_found
 
        mov     esi, boot_failed
        call    boot_log
 
        mov     eax, 0xDEADBEEF      ; otherwise halt
        hlt
 
first_app_found:
 
 
 
 
; START MULTITASKING
 
; A 'All set - press ESC to start' messages if need
if preboot_blogesc
        mov     esi, boot_tasking
        call    boot_log
.bll1:
        in      al, 0x60        ; wait for ESC key press
        cmp     al, 129
        jne     .bll1
end if
 
        mov     [timer_ticks_enable], 1         ; for cd driver
 
        sti
 
        call    mtrr_validate
 
        jmp     osloop
 
 
        ; Fly :)
 
uglobal
align 4
ap_initialized  dd      0
endg
 
ap_init_high:
        mov     ax, os_stack
        mov     bx, app_data
        mov     cx, app_tls
        mov     ss, ax
        mov     ds, bx
        mov     es, bx
        mov     fs, cx
        mov     gs, bx
        xor     esp, esp
        mov     eax, sys_proc-OS_BASE+PROC.pdt_0
        mov     cr3, eax
        lock inc [ap_initialized]
        jmp     idle_loop
 
 
include 'unpacker.inc'
 
align 4
boot_log:
        pushad
 
        mov     ebx, 10*65536
        mov     bx, word [boot_y]
        add     [boot_y], dword 10
        mov     ecx, 0x80ffffff; ASCIIZ string with white color
        xor     edi, edi
        mov     edx, esi
        inc     edi
        call    dtext
 
        mov     [novesachecksum], 1000
        call    checkVga_N13
 
        popad
 
        ret
 
; in: edx -> APPDATA for OS/IDLE slot
; in: ebx = stack base
proc setup_os_slot
        xor     eax, eax
        mov     ecx, 256/4
        mov     edi, edx
        rep stosd
 
        mov     eax, tss+0x80
        call    get_pg_addr
        inc     eax
        mov     [edx+APPDATA.io_map], eax
        mov     eax, tss+0x1080
        call    get_pg_addr
        inc     eax
        mov     [edx+APPDATA.io_map+4], eax
 
        mov     dword [edx+APPDATA.pl0_stack], ebx
        lea     edi, [ebx+0x2000-512]
        mov     dword [edx+APPDATA.fpu_state], edi
        mov     dword [edx+APPDATA.saved_esp0], edi
        mov     dword [edx+APPDATA.saved_esp], edi
        mov     dword [edx+APPDATA.terminate_protection], 1 ; make unkillable
 
        mov     esi, fpu_data
        mov     ecx, 512/4
        cld
        rep movsd
 
        lea     eax, [edx+APP_OBJ_OFFSET]
        mov     dword [edx+APPDATA.fd_obj], eax
        mov     dword [edx+APPDATA.bk_obj], eax
 
        mov     dword [edx+APPDATA.cur_dir], sysdir_path
 
        mov     [edx + APPDATA.process], sys_proc
 
        lea     ebx, [edx+APPDATA.list]
        lea     ecx, [sys_proc+PROC.thr_list]
        list_add_tail ebx, ecx
 
        mov     eax, edx
        shr     eax, 3
        add     eax, CURRENT_TASK - (SLOT_BASE shr 3)
        mov     [eax+TASKDATA.wnd_number], dh
        mov     byte [eax+TASKDATA.pid], dh
 
        ret
endp
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                                                                    ;
;                    MAIN OS LOOP START                              ;
;                                                                    ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 32
osloop:
        mov     edx, osloop_has_work?
        xor     ecx, ecx
        call    Wait_events
        xor     eax, eax
        xchg    eax, [osloop_nonperiodic_work]
        test    eax, eax
        jz      .no_periodic
 
        call    __sys_draw_pointer
        call    window_check_events
        call    mouse_check_events
        call    checkmisc
        call    checkVga_N13
;--------------------------------------
.no_periodic:
        call    stack_handler
        call    check_fdd_motor_status
        call    check_ATAPI_device_event
        call    check_lights_state
        call    check_timers
 
        jmp     osloop
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                                                                    ;
;                      MAIN OS LOOP END                              ;
;                                                                    ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc osloop_has_work?
        cmp     [osloop_nonperiodic_work], 0
        jnz     .yes
        call    stack_handler_has_work?
        jnz     .yes
        call    check_fdd_motor_status_has_work?
        jnz     .yes
        call    check_ATAPI_device_event_has_work?
        jnz     .yes
        call    check_lights_state_has_work?
        jnz     .yes
        call    check_timers_has_work?
        jnz     .yes
.no:
        xor     eax, eax
        ret
.yes:
        xor     eax, eax
        inc     eax
        ret
endp
 
proc wakeup_osloop
        mov     [osloop_nonperiodic_work], 1
        ret
endp
 
uglobal
align 4
osloop_nonperiodic_work dd      ?
endg
 
uglobal
align 64
idle_addr       rb      64
endg
 
idle_thread:
        sti
 
; The following code can be executed by all CPUs in the system.
; All other parts of the kernel do not expect multi-CPU.
; Also, APs don't even have a stack here.
; Beware. Don't do anything here. Anything at all.
idle_loop:
        cmp     [use_mwait_for_idle], 0
        jnz     idle_loop_mwait
 
idle_loop_hlt:
        hlt
        jmp     idle_loop_hlt
 
idle_loop_mwait:
        mov     eax, idle_addr
        xor     ecx, ecx
        xor     edx, edx
        monitor
        xor     ecx, ecx
        mov     eax, 20h        ; or 10h
        mwait
        jmp     idle_loop_mwait
 
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                                                                      ;
;                   INCLUDED SYSTEM FILES                              ;
;                                                                      ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 
include "kernel32.inc"
 
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                                                                      ;
;                       KERNEL FUNCTIONS                               ;
;                                                                      ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
reserve_irqs_ports:
 
 
; RESERVE PORTS
        mov     eax, RESERVED_PORTS
        mov     ecx, 1
 
        mov     [eax], dword 4
 
        mov     [eax+16], ecx
        mov     [eax+16+4], dword 0
        mov     [eax+16+8], dword 0x2D
 
        mov     [eax+32], ecx
        mov     [eax+32+4], dword 0x30
        mov     [eax+32+8], dword 0x4D
 
        mov     [eax+48], ecx
        mov     [eax+48+4], dword 0x50
        mov     [eax+48+8], dword 0xDF
 
        mov     [eax+64], ecx
        mov     [eax+64+4], dword 0xE5
        mov     [eax+64+8], dword 0xFF
 
        ret
 
 
iglobal
  process_number dd 0x2
endg
 
set_variables:
 
        mov     ecx, 0x16                    ; flush port 0x60
.fl60:
        in      al, 0x60
        loop    .fl60
        push    eax
 
        mov     ax, [BOOT_VARS+BOOT_Y_RES]
        shr     ax, 1
        shl     eax, 16
        mov     ax, [BOOT_VARS+BOOT_X_RES]
        shr     ax, 1
        mov     [MOUSE_X], eax
        call    wakeup_osloop
 
        xor     eax, eax
        mov     [BTN_ADDR], dword BUTTON_INFO ; address of button list
 
        mov     byte [KEY_COUNT], al              ; keyboard buffer
        mov     byte [BTN_COUNT], al              ; button buffer
;        mov   [MOUSE_X],dword 100*65536+100    ; mouse x/y
 
        pop     eax
        ret
 
align 4
;input  eax=43,bl-byte of output, ecx - number of port
sys_outport:
 
        mov     edi, ecx   ; separate flag for read / write
        and     ecx, 65535
 
        mov     eax, [RESERVED_PORTS]
        test    eax, eax
        jnz     .sopl8
        inc     eax
        mov     [esp+32], eax
        ret
 
  .sopl8:
        mov     edx, [TASK_BASE]
        mov     edx, [edx+0x4]
    ;and   ecx,65535
    ;cld - set on interrupt 0x40
  .sopl1:
 
        mov     esi, eax
        shl     esi, 4
        add     esi, RESERVED_PORTS
        cmp     edx, [esi+0]
        jne     .sopl2
        cmp     ecx, [esi+4]
        jb      .sopl2
        cmp     ecx, [esi+8]
        jg      .sopl2
.sopl3:
 
        test    edi, 0x80000000; read ?
        jnz     .sopl4
 
        mov     eax, ebx
        mov     dx, cx   ; write
        out     dx, al
        and     [esp+32], dword 0
        ret
 
        .sopl2:
 
        dec     eax
        jnz     .sopl1
        inc     eax
        mov     [esp+32], eax
        ret
 
 
  .sopl4:
 
        mov     dx, cx   ; read
        in      al, dx
        and     eax, 0xff
        and     [esp+32], dword 0
        mov     [esp+20], eax
        ret
 
display_number:
;It is not optimization
        mov     eax, ebx
        mov     ebx, ecx
        mov     ecx, edx
        mov     edx, esi
        mov     esi, edi
; eax = print type, al=0 -> ebx is number
;                   al=1 -> ebx is pointer
;                   ah=0 -> display decimal
;                   ah=1 -> display hexadecimal
;                   ah=2 -> display binary
;                   eax bits 16-21 = number of digits to display (0-32)
;                   eax bits 22-31 = reserved
;
; ebx = number or pointer
; ecx = x shl 16 + y
; edx = color
        xor     edi, edi
display_number_force:
        push    eax
        and     eax, 0x3fffffff
        cmp     eax, 0xffff     ; length > 0 ?
        pop     eax
        jge     cont_displ
        ret
   cont_displ:
        push    eax
        and     eax, 0x3fffffff
        cmp     eax, 61*0x10000  ; length <= 60 ?
        pop     eax
        jb      cont_displ2
        ret
   cont_displ2:
 
        pushad
 
        cmp     al, 1            ; ecx is a pointer ?
        jne     displnl1
        mov     ebp, ebx
        add     ebp, 4
        mov     ebp, [ebp+std_application_base_address]
        mov     ebx, [ebx+std_application_base_address]
 displnl1:
        sub     esp, 64
 
        test    ah, ah            ; DECIMAL
        jnz     no_display_desnum
        shr     eax, 16
        and     eax, 0xC03f
;     and   eax,0x3f
        push    eax
        and     eax, 0x3f
        mov     edi, esp
        add     edi, 4+64-1
        mov     ecx, eax
        mov     eax, ebx
        mov     ebx, 10
 d_desnum:
        xor     edx, edx
        call    division_64_bits
        div     ebx
        add     dl, 48
        mov     [edi], dl
        dec     edi
        loop    d_desnum
        pop     eax
        call    normalize_number
        call    draw_num_text
        add     esp, 64
        popad
        ret
   no_display_desnum:
 
        cmp     ah, 0x01         ; HEXADECIMAL
        jne     no_display_hexnum
        shr     eax, 16
        and     eax, 0xC03f
;     and   eax,0x3f
        push    eax
        and     eax, 0x3f
        mov     edi, esp
        add     edi, 4+64-1
        mov     ecx, eax
        mov     eax, ebx
        mov     ebx, 16
   d_hexnum:
        xor     edx, edx
        call    division_64_bits
        div     ebx
   hexletters = __fdo_hexdigits
        add     edx, hexletters
        mov     dl, [edx]
        mov     [edi], dl
        dec     edi
        loop    d_hexnum
        pop     eax
        call    normalize_number
        call    draw_num_text
        add     esp, 64
        popad
        ret
   no_display_hexnum:
 
        cmp     ah, 0x02         ; BINARY
        jne     no_display_binnum
        shr     eax, 16
        and     eax, 0xC03f
;     and   eax,0x3f
        push    eax
        and     eax, 0x3f
        mov     edi, esp
        add     edi, 4+64-1
        mov     ecx, eax
        mov     eax, ebx
        mov     ebx, 2
   d_binnum:
        xor     edx, edx
        call    division_64_bits
        div     ebx
        add     dl, 48
        mov     [edi], dl
        dec     edi
        loop    d_binnum
        pop     eax
        call    normalize_number
        call    draw_num_text
        add     esp, 64
        popad
        ret
   no_display_binnum:
 
        add     esp, 64
        popad
        ret
 
normalize_number:
        test    ah, 0x80
        jz      .continue
        mov     ecx, 48
        and     eax, 0x3f
@@:
        inc     edi
        cmp     [edi], cl
        jne     .continue
        dec     eax
        cmp     eax, 1
        ja      @r
        mov     al, 1
.continue:
        and     eax, 0x3f
        ret
 
division_64_bits:
        test    [esp+1+4], byte 0x40
        jz      .continue
        push    eax
        mov     eax, ebp
        div     ebx
        mov     ebp, eax
        pop     eax
.continue:
        ret
 
draw_num_text:
        mov     esi, eax
        mov     edx, 64+4
        sub     edx, eax
        add     edx, esp
        mov     ebx, [esp+64+32-8+4]
; add window start x & y
        mov     ecx, [TASK_BASE]
 
        mov     edi, [CURRENT_TASK]
        shl     edi, 8
 
        mov     eax, [ecx-twdw+WDATA.box.left]
        add     eax, [edi+SLOT_BASE+APPDATA.wnd_clientbox.left]
        shl     eax, 16
        add     eax, [ecx-twdw+WDATA.box.top]
        add     eax, [edi+SLOT_BASE+APPDATA.wnd_clientbox.top]
        add     ebx, eax
        mov     ecx, [esp+64+32-12+4]
 
        mov     eax, [esp+64+8]         ; background color (if given)
        mov     edi, [esp+64+4]
        and     ecx, 5FFFFFFFh
        bt      ecx, 27
        jnc     @f
        mov     edi, eax
@@:
        jmp     dtext
;-----------------------------------------------------------------------------
iglobal
midi_base dw 0
endg
;-----------------------------------------------------------------------------
align 4
sys_setup:
;  1 = roland mpu midi base , base io address
;  2 = keyboard   1, base kaybap 2, shift keymap, 9 country 1eng 2fi 3ger 4rus
;  3 = not used
;  4 = not used
;  5 = system language, 1eng 2fi 3ger 4rus
;  6 = not used
;  7 = not used
;  8 = not used
;  9 = not used
; 10 = not used
; 11 = enable lba read
; 12 = enable pci access
;-----------------------------------------------------------------------------
        and     [esp+32], dword 0
; F.21.1 - set MPU MIDI base port
        dec     ebx
        jnz     @f
 
        cmp     ecx, 0x100
        jb      @f
 
        mov     esi, 65535
        cmp     esi, ecx
        jb      @f
 
        mov     [midi_base], cx
        mov     word [mididp], cx
        inc     cx
        mov     word [midisp], cx
        ret
;--------------------------------------
@@:
; F.21.2 - set keyboard layout
        dec     ebx
        jnz     @f
 
        mov     edi, [TASK_BASE]
        mov     eax, [edi+TASKDATA.mem_start]
        add     eax, edx
; 1 = normal layout
        dec     ecx
        jnz     .shift
 
        mov     ebx, keymap
        mov     ecx, 128
        call    memmove
        ret
;--------------------------------------
.shift:
; 2 = layout at pressed Shift
        dec     ecx
        jnz     .alt
 
        mov     ebx, keymap_shift
        mov     ecx, 128
        call    memmove
        ret
;--------------------------------------
.alt:
; 3 = layout at pressed Alt
        dec     ecx
        jnz     .country
 
        mov     ebx, keymap_alt
        mov     ecx, 128
        call    memmove
        ret
;--------------------------------------
.country:
; country identifier
        sub     ecx, 6
        jnz     .error
 
        mov     word [keyboard], dx
        ret
;--------------------------------------
@@:
; F.21.5 - set system language
        sub     ebx, 3
        jnz     @f
 
        mov     [syslang], ecx
        ret
;--------------------------------------
@@:
; F.21.11 - enable/disable low-level access to HD
        and     ecx, 1
        sub     ebx, 6
        jnz     @f
 
        mov     [lba_read_enabled], ecx
        ret
;--------------------------------------
@@:
; F.21.12 - enable/disable low-level access to PCI
        dec     ebx
        jnz     .error
 
        mov     [pci_access_enabled], ecx
        ret
;--------------------------------------
.error:
        or      [esp+32], dword -1
        ret
;-----------------------------------------------------------------------------
align 4
sys_getsetup:
;  1 = roland mpu midi base , base io address
;  2 = keyboard   1, base kaybap 2, shift keymap, 9 country 1eng 2fi 3ger 4rus
;  3 = not used
;  4 = not used
;  5 = system language, 1eng 2fi 3ger 4rus
;  6 = not used
;  7 = not used
;  8 = not used
;  9 = get hs timer tic
; 10 = not used
; 11 = get the state "lba read"
; 12 = get the state "pci access"
;-----------------------------------------------------------------------------
; F.26.1 - get MPU MIDI base port
        dec     ebx
        jnz     @f
 
        movzx   eax, [midi_base]
        mov     [esp+32], eax
        ret
;--------------------------------------
@@:
; F.26.2 - get keyboard layout
        dec     ebx
        jnz     @f
 
        mov     edi, [TASK_BASE]
        mov     ebx, [edi+TASKDATA.mem_start]
        add     ebx, edx
; 1 = normal layout
        dec     ecx
        jnz     .shift
 
        mov     eax, keymap
        mov     ecx, 128
        call    memmove
        ret
;--------------------------------------
.shift:
; 2 = layout with pressed Shift
        dec     ecx
        jnz     .alt
 
        mov     eax, keymap_shift
        mov     ecx, 128
        call    memmove
        ret
;--------------------------------------
.alt:
; 3 = layout with pressed Alt
        dec     ecx
        jne     .country
 
        mov     eax, keymap_alt
        mov     ecx, 128
        call    memmove
        ret
;--------------------------------------
.country:
; 9 = country identifier
        sub     ecx, 6
        jnz     .error
 
        movzx   eax, word [keyboard]
        mov     [esp+32], eax
        ret
;--------------------------------------
@@:
; F.26.5 - get system language
        sub     ebx, 3
        jnz     @f
 
        mov     eax, [syslang]
        mov     [esp+32], eax
        ret
;--------------------------------------
@@:
; F.26.9 - get the value of the time counter
        sub     ebx, 4
        jnz     @f
 
        mov     eax, [timer_ticks]
        mov     [esp+32], eax
        ret
;--------------------------------------
@@:
; F.26.10 - get the time from kernel launch in nanoseconds
        sub     ebx, 1
        jnz     @f
 
        call    get_clock_ns
        mov     [esp+24], edx
        mov     [esp+32], eax
        ret
;--------------------------------------
@@:
; F.26.11 - Find out whether low-level HD access is enabled
        sub     ebx, 1
        jnz     @f
 
        mov     eax, [lba_read_enabled]
        mov     [esp+32], eax
        ret
;--------------------------------------
@@:
; F.26.12 - Find out whether low-level PCI access is enabled
        dec     ebx
        jnz     .error
 
        mov     eax, [pci_access_enabled]
        mov     [esp+32], eax
        ret
;--------------------------------------
.error:
        or      [esp+32], dword -1
        ret
;-----------------------------------------------------------------------------
get_timer_ticks:
        mov     eax, [timer_ticks]
        ret
;-----------------------------------------------------------------------------
iglobal
align 4
mousefn dd msscreen
        dd mswin
        dd msbutton
        dd msbuttonExt
        dd app_load_cursor
        dd app_set_cursor
        dd app_delete_cursor
        dd msz
endg
;-----------------------------------------------------------------------------
readmousepos:
 
; eax=0 screen relative
; eax=1 window relative
; eax=2 buttons pressed
; eax=3 buttons pressed ext
; eax=4 load cursor
; eax=5 set cursor
; eax=6 delete cursor
; eax=7 get mouse_z
 
        cmp     ebx, 7
        ja      @f
        jmp     [mousefn+ebx*4]
 
msscreen:
        mov     eax, [MOUSE_X]
        shl     eax, 16
        mov     ax, [MOUSE_Y]
        mov     [esp+36-4], eax
@@:
        ret
 
mswin:
        mov     eax, [MOUSE_X]
        shl     eax, 16
        mov     ax, [MOUSE_Y]
        mov     esi, [TASK_BASE]
        mov     bx, word [esi-twdw+WDATA.box.left]
        shl     ebx, 16
        mov     bx, word [esi-twdw+WDATA.box.top]
        sub     eax, ebx
        mov     edi, [CURRENT_TASK]
        shl     edi, 8
        sub     ax, word[edi+SLOT_BASE+APPDATA.wnd_clientbox.top]
        rol     eax, 16
        sub     ax, word[edi+SLOT_BASE+APPDATA.wnd_clientbox.left]
        rol     eax, 16
        mov     [esp+36-4], eax
        ret
 
msbutton:
        movzx   eax, byte [BTN_DOWN]
        mov     [esp+36-4], eax
        ret
 
msbuttonExt:
        mov     eax, [BTN_DOWN]
        mov     [esp+36-4], eax
        ret
 
app_load_cursor:
        cmp     ecx, OS_BASE
        jae     @f
        stdcall load_cursor, ecx, edx
        mov     [esp+36-4], eax
@@:
        ret
 
app_set_cursor:
        stdcall set_cursor, ecx
        mov     [esp+36-4], eax
        ret
 
app_delete_cursor:
        stdcall delete_cursor, ecx
        mov     [esp+36-4], eax
        ret
 
msz:
        mov     edi, [TASK_COUNT]
        movzx   edi, word [WIN_POS + edi*2]
        cmp     edi, [CURRENT_TASK]
        jne     @f
        mov     ax, [MOUSE_SCROLL_H]
        shl     eax, 16
        mov     ax, [MOUSE_SCROLL_V]
        mov     [esp+36-4], eax
        and     [MOUSE_SCROLL_H], word 0
        and     [MOUSE_SCROLL_V], word 0
        ret
@@:
        and     [esp+36-4], dword 0
        ret
 
is_input:
 
        push    edx
        mov     dx, word [midisp]
        in      al, dx
        and     al, 0x80
        pop     edx
        ret
 
is_output:
 
        push    edx
        mov     dx, word [midisp]
        in      al, dx
        and     al, 0x40
        pop     edx
        ret
 
 
get_mpu_in:
 
        push    edx
        mov     dx, word [mididp]
        in      al, dx
        pop     edx
        ret
 
 
put_mpu_out:
 
        push    edx
        mov     dx, word [mididp]
        out     dx, al
        pop     edx
        ret
 
 
 
align 4
 
sys_midi:
        cmp     [mididp], 0
        jnz     sm0
        mov     [esp+36], dword 1
        ret
sm0:
        and     [esp+36], dword 0
        dec     ebx
        jnz     smn1
 ;    call setuart
su1:
        call    is_output
        test    al, al
        jnz     su1
        mov     dx, word [midisp]
        mov     al, 0xff
        out     dx, al
su2:
        mov     dx, word [midisp]
        mov     al, 0xff
        out     dx, al
        call    is_input
        test    al, al
        jnz     su2
        call    get_mpu_in
        cmp     al, 0xfe
        jnz     su2
su3:
        call    is_output
        test    al, al
        jnz     su3
        mov     dx, word [midisp]
        mov     al, 0x3f
        out     dx, al
        ret
smn1:
        dec     ebx
        jnz     smn2
sm10:
        call    get_mpu_in
        call    is_output
        test    al, al
        jnz     sm10
        mov     al, bl
        call    put_mpu_out
        smn2:
        ret
 
detect_devices:
;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;include 'detect/commouse.inc'
;include 'detect/ps2mouse.inc'
;include 'detect/dev_fd.inc'
;include 'detect/dev_hdcd.inc'
;include 'detect/sear_par.inc'
;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
        ret
 
sys_end:
;--------------------------------------
        cmp     [_display.select_cursor], 0
        je      @f
; restore default cursor before killing
        pusha
        mov     ecx, [current_slot]
        call    restore_default_cursor_before_killing
        popa
@@:
;--------------------------------------
; kill all sockets this process owns
        pusha
        mov     edx, [TASK_BASE]
        mov     edx, [edx+TASKDATA.pid]
        call    socket_process_end
        popa
;--------------------------------------
        mov     ecx, [current_slot]
        mov     eax, [ecx+APPDATA.tls_base]
        test    eax, eax
        jz      @F
 
        stdcall user_free, eax
@@:
 
        mov     eax, [TASK_BASE]
        mov     [eax+TASKDATA.state], TSTATE_ZOMBIE
        call    wakeup_osloop
 
.waitterm:            ; wait here for termination
        call    change_task
        jmp     .waitterm
;------------------------------------------------------------------------------
align 4
restore_default_cursor_before_killing:
        pushfd
        cli
        mov     eax, [def_cursor]
        mov     [ecx+APPDATA.cursor], eax
 
        movzx   eax, word [MOUSE_Y]
        movzx   ebx, word [MOUSE_X]
        mov     eax, [d_width_calc_area + eax*4]
 
        add     eax, [_display.win_map]
        movzx   edx, byte [ebx+eax]
        shl     edx, 8
        mov     esi, [edx+SLOT_BASE+APPDATA.cursor]
 
        cmp     esi, [current_cursor]
        je      @f
 
        push    esi
        call    [_display.select_cursor]
        mov     [current_cursor], esi
@@:
        mov     [redrawmouse_unconditional], 1
        call    wakeup_osloop
        popfd
        ret
;------------------------------------------------------------------------------
iglobal
align 4
sys_system_table:
        dd      sysfn_deactivate        ; 1 = deactivate window
        dd      sysfn_terminate         ; 2 = terminate thread
        dd      sysfn_activate          ; 3 = activate window
        dd      sysfn_getidletime       ; 4 = get idle time
        dd      sysfn_getcpuclock       ; 5 = get cpu clock
        dd      sysfn_saveramdisk       ; 6 = save ramdisk
        dd      sysfn_getactive         ; 7 = get active window
        dd      sysfn_sound_flag        ; 8 = get/set sound_flag
        dd      sysfn_shutdown          ; 9 = shutdown with parameter
        dd      sysfn_minimize          ; 10 = minimize window
        dd      sysfn_getdiskinfo       ; 11 = get disk subsystem info
        dd      sysfn_lastkey           ; 12 = get last pressed key
        dd      sysfn_getversion        ; 13 = get kernel version
        dd      sysfn_waitretrace       ; 14 = wait retrace
        dd      sysfn_centermouse       ; 15 = center mouse cursor
        dd      sysfn_getfreemem        ; 16 = get free memory size
        dd      sysfn_getallmem         ; 17 = get total memory size
        dd      sysfn_terminate2        ; 18 = terminate thread using PID
                                        ;                 instead of slot
        dd      sysfn_mouse_acceleration; 19 = set/get mouse acceleration
        dd      sysfn_meminfo           ; 20 = get extended memory info
        dd      sysfn_pid_to_slot       ; 21 = get slot number for pid
        dd      sysfn_min_rest_window   ; 22 = minimize and restore any window
        dd      sysfn_min_windows       ; 23 = minimize all windows
        dd      sysfn_set_screen_sizes  ; 24 = set screen sizes for Vesa
 
        dd      sysfn_zmodif            ; 25 = get/set window z modifier  ;Fantomer
sysfn_num = ($ - sys_system_table)/4
endg
;------------------------------------------------------------------------------
sys_system:
        dec     ebx
        cmp     ebx, sysfn_num
        jae     @f
        jmp     dword [sys_system_table + ebx*4]
@@:
        ret
;------------------------------------------------------------------------------
sysfn_shutdown:          ; 18.9 = system shutdown
        cmp     ecx, 1
        jl      exit_for_anyone
        cmp     ecx, 4
        jg      exit_for_anyone
        mov     [BOOT_VARS+0x9030], cl
 
        mov     eax, [TASK_COUNT]
        mov     [SYS_SHUTDOWN], al
        mov     [shutdown_processes], eax
        call    wakeup_osloop
        and     dword [esp+32], 0
 exit_for_anyone:
        ret
  uglobal
   shutdown_processes:
                       dd 0x0
  endg
;------------------------------------------------------------------------------
sysfn_terminate:        ; 18.2 = TERMINATE
        push    ecx
        cmp     ecx, 2
        jb      noprocessterminate
        mov     edx, [TASK_COUNT]
        cmp     ecx, edx
        ja      noprocessterminate
        mov     eax, [TASK_COUNT]
        shl     ecx, 5
        mov     edx, [ecx+CURRENT_TASK+TASKDATA.pid]
        add     ecx, CURRENT_TASK+TASKDATA.state
        cmp     byte [ecx], 9
        jz      noprocessterminate
        push    ecx edx
        lea     edx, [(ecx-(CURRENT_TASK and 1FFFFFFFh)-TASKDATA.state)*8+SLOT_BASE]
        call    request_terminate
        pop     edx ecx
        test    eax, eax
        jz      noprocessterminate
;--------------------------------------
; terminate all network sockets it used
        pusha
        mov     eax, edx
        call    socket_process_end
        popa
;--------------------------------------
        cmp     [_display.select_cursor], 0
        je      .restore_end
; restore default cursor before killing
        pusha
        mov     ecx, [esp+32]
        shl     ecx, 8
        add     ecx, SLOT_BASE
        mov     eax, [def_cursor]
        cmp     [ecx+APPDATA.cursor], eax
        je      @f
        call    restore_default_cursor_before_killing
@@:
        popa
.restore_end:
;--------------------------------------
     ;call MEM_Heap_Lock      ;guarantee that process isn't working with heap
        mov     [ecx], byte 3; clear possible i40's
        call    wakeup_osloop
     ;call MEM_Heap_UnLock
 
        cmp     edx, [application_table_owner]; clear app table stat
        jne     noatsc
        call    unlock_application_table
noatsc:
noprocessterminate:
        add     esp, 4
        ret
;------------------------------------------------------------------------------
sysfn_terminate2:
;lock application_table_status mutex
.table_status:
        call    lock_application_table
        mov     eax, ecx
        call    pid_to_slot
        test    eax, eax
        jz      .not_found
        mov     ecx, eax
        cli
        call    sysfn_terminate
        call    unlock_application_table
        sti
        and     dword [esp+32], 0
        ret
.not_found:
        call    unlock_application_table
        or      dword [esp+32], -1
        ret
;------------------------------------------------------------------------------
sysfn_deactivate:         ; 18.1 = DEACTIVATE WINDOW
        cmp     ecx, 2
        jb      .nowindowdeactivate
        cmp     ecx, [TASK_COUNT]
        ja      .nowindowdeactivate
 
        movzx   esi, word [WIN_STACK + ecx*2]
        cmp     esi, 1
        je      .nowindowdeactivate ; already deactive
 
        mov     edi, ecx
        shl     edi, 5
        add     edi, window_data
        movzx   esi, word [WIN_STACK + ecx * 2]
        lea     esi, [WIN_POS + esi * 2]
        call    window._.window_deactivate
 
        call    syscall_display_settings._.calculate_whole_screen
        call    syscall_display_settings._.redraw_whole_screen
.nowindowdeactivate:
        ret
;------------------------------------------------------------------------------
sysfn_activate:         ; 18.3 = ACTIVATE WINDOW
        cmp     ecx, 2
        jb      .nowindowactivate
        cmp     ecx, [TASK_COUNT]
        ja      .nowindowactivate
;-------------------------------------
@@:
; If the window is captured and moved by the user,
; then you can't change the position in window stack!!!
        mov     al, [mouse.active_sys_window.action]
        and     al, WINDOW_MOVE_AND_RESIZE_FLAGS
        test    al, al
        jz      @f
        call    change_task
        jmp     @b
@@:
;-------------------------------------
        mov     [window_minimize], 2; restore window if minimized
        call    wakeup_osloop
 
        movzx   esi, word [WIN_STACK + ecx*2]
        cmp     esi, [TASK_COUNT]
        je      .nowindowactivate; already active
 
        mov     edi, ecx
        shl     edi, 5
        add     edi, window_data
        movzx   esi, word [WIN_STACK + ecx * 2]
        lea     esi, [WIN_POS + esi * 2]
        call    waredraw
.nowindowactivate:
        ret
;------------------------------------------------------------------------------
align 4
sysfn_zmodif:
;18,25,1 - get z_modif
;18,25,2 - set z_modif
;edx = -1(for current task) or TID
;esi(for 2) = new value z_modif
;return:
;1:   eax = z_modif
;2: eax=0(fail),1(success) for set z_modif
 
        cmp     edx, -1
        jne     @f
        mov     edx, [CURRENT_TASK]
     @@:
        cmp     edx, [TASK_COUNT]
        ja      .fail
        cmp     edx, 1
        je      .fail
 
        mov     eax, edx
        shl     edx, 5
 
        cmp     [edx + CURRENT_TASK + TASKDATA.state], 9
        je      .fail
 
        cmp     ecx, 1
        jnz     .set_zmod
 
        mov     al, [edx + window_data + WDATA.z_modif]
        jmp     .exit
 
.set_zmod:
        cmp     ecx, 2
        jnz     .fail
 
        mov     ebx, esi
        mov     esi, eax
 
        cmp     bl, ZPOS_ALWAYS_TOP
        jg      .fail
 
        mov     [edx + window_data + WDATA.z_modif], bl
 
        mov     eax, [edx + window_data + WDATA.box.left]
        mov     ebx, [edx + window_data + WDATA.box.top]
        mov     ecx, [edx + window_data + WDATA.box.width]
        mov     edx, [edx + window_data + WDATA.box.height]
        add     ecx, eax
        add     edx, ebx
        call    window._.set_screen
        call    window._.set_top_wnd
        call    window._.redraw_top_wnd
 
        shl     esi, 5
        mov     [esi + window_data + WDATA.fl_redraw], 1
 
 
        mov     eax, 1
        jmp     .exit
.fail:
        xor     eax, eax
.exit:
        mov     [esp+32], eax
        ret
 
;------------------------------------------------------------------------------
sysfn_getidletime:              ; 18.4 = GET IDLETIME
        mov     eax, [CURRENT_TASK+32+TASKDATA.cpu_usage]
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_getcpuclock:              ; 18.5 = GET TSC/SEC
        mov     eax, dword [cpu_freq]
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
get_cpu_freq:
        mov     eax, dword [cpu_freq]
        mov     edx, dword [cpu_freq+4]
        ret
;  SAVE ramdisk to /hd/1/menuet.img
;!!!!!!!!!!!!!!!!!!!!!!!!
   include 'blkdev/rdsave.inc'
;!!!!!!!!!!!!!!!!!!!!!!!!
;------------------------------------------------------------------------------
align 4
sysfn_getactive:        ; 18.7 = get active window
        mov     eax, [TASK_COUNT]
        movzx   eax, word [WIN_POS + eax*2]
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_sound_flag:       ; 18.8 = get/set sound_flag
;     cmp  ecx,1
        dec     ecx
        jnz     nogetsoundflag
        movzx   eax, byte [sound_flag]; get sound_flag
        mov     [esp+32], eax
        ret
 nogetsoundflag:
;     cmp  ecx,2
        dec     ecx
        jnz     nosoundflag
        xor     byte [sound_flag], 1
 nosoundflag:
        ret
;------------------------------------------------------------------------------
sysfn_minimize:         ; 18.10 = minimize window
        mov     [window_minimize], 1
        call    wakeup_osloop
        ret
;------------------------------------------------------------------------------
align 4
sysfn_getdiskinfo:      ; 18.11 = get disk info table
        dec     ecx
        jnz     .exit
.small_table:
        mov     edi, edx
        mov     esi, DRIVE_DATA
        mov     ecx, DRIVE_DATA_SIZE ;10
        cld
        rep movsb
.exit:
        ret
;------------------------------------------------------------------------------
sysfn_lastkey:          ; 18.12 = return 0 (backward compatibility)
        and     dword [esp+32], 0
        ret
;------------------------------------------------------------------------------
sysfn_getversion:       ; 18.13 = get kernel ID and version
        mov     edi, ecx
        mov     esi, version_inf
        mov     ecx, version_end-version_inf
        rep movsb
        ret
;------------------------------------------------------------------------------
sysfn_waitretrace:     ; 18.14 = sys wait retrace
     ;wait retrace functions
 sys_wait_retrace:
        mov     edx, 0x3da
 WaitRetrace_loop:
        in      al, dx
        test    al, 1000b
        jz      WaitRetrace_loop
        and     [esp+32], dword 0
        ret
;------------------------------------------------------------------------------
align 4
sysfn_centermouse:      ; 18.15 = mouse centered
        mov     eax, [_display.width]
        shr     eax, 1
        mov     [MOUSE_X], ax
        mov     eax, [_display.height]
        shr     eax, 1
        mov     [MOUSE_Y], ax
        call    wakeup_osloop
        xor     eax, eax
        and     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_mouse_acceleration:       ; 18.19 = set/get mouse features
        cmp     ecx, 8
        jnc     @f
        jmp     dword [.table+ecx*4]
.get_mouse_acceleration:
        xor     eax, eax
        mov     ax, [mouse_speed_factor]
        mov     [esp+32], eax
        ret
.set_mouse_acceleration:
        mov     [mouse_speed_factor], dx
        ret
.get_mouse_delay:
        xor     eax, eax
        mov     al, [mouse_delay]
        mov     [esp+32], eax
        ret
.set_mouse_delay:
        mov     [mouse_delay], dl
@@:
        ret
.set_pointer_position:
        cmp     dx, word[_display.height]
        jae     @b
        rol     edx, 16
        cmp     dx, word[_display.width]
        jae     @b
        mov     [MOUSE_X], edx
        mov     [mouse_active], 1
        jmp     wakeup_osloop
.set_mouse_button:
        mov     [BTN_DOWN], edx
        mov     [mouse_active], 1
        jmp     wakeup_osloop
.get_doubleclick_delay:
        xor     eax, eax
        mov     al, [mouse_doubleclick_delay]
        mov     [esp+32], eax
        ret
.set_doubleclick_delay:
        mov     [mouse_doubleclick_delay], dl
        ret
align 4
.table:
dd      .get_mouse_acceleration
dd      .set_mouse_acceleration
dd      .get_mouse_delay
dd      .set_mouse_delay
dd      .set_pointer_position
dd      .set_mouse_button
dd      .get_doubleclick_delay
dd      .set_doubleclick_delay
;------------------------------------------------------------------------------
sysfn_getfreemem:
        mov     eax, [pg_data.pages_free]
        shl     eax, 2
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_getallmem:
        mov     eax, [MEM_AMOUNT]
        shr     eax, 10
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_pid_to_slot:
        mov     eax, ecx
        call    pid_to_slot
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_min_rest_window:
        pushad
        mov     eax, edx ; ebx - operating
        shr     ecx, 1
        jnc     @f
        call    pid_to_slot
@@:
        or      eax, eax ; eax - number of slot
        jz      .error
        cmp     eax, 255    ; varify maximal slot number
        ja      .error
        movzx   eax, word [WIN_STACK + eax*2]
        shr     ecx, 1
        jc      .restore
 ; .minimize:
        call    minimize_window
        jmp     .exit
.restore:
        call    restore_minimized_window
.exit:
        popad
        xor     eax, eax
        mov     [esp+32], eax
        ret
.error:
        popad
        xor     eax, eax
        dec     eax
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
sysfn_min_windows:
        call    minimize_all_window
        mov     [esp+32], eax
        call    change_task
        ret
;------------------------------------------------------------------------------
sysfn_set_screen_sizes:
        cmp     [SCR_MODE], word 0x13
        jbe     .exit
 
        cmp     [_display.select_cursor], select_cursor
        jne     .exit
 
        cmp     ecx, [display_width_standard]
        ja      .exit
 
        cmp     edx, [display_height_standard]
        ja      .exit
 
        pushfd
        cli
        mov     eax, ecx
        mov     ecx, [_display.lfb_pitch]
        mov     [_display.width], eax
        dec     eax
        mov     [_display.height], edx
        dec     edx
; eax - new Screen_Max_X
; edx - new Screen_Max_Y
        mov     [do_not_touch_winmap], 1
        call    set_screen
        mov     [do_not_touch_winmap], 0
        popfd
        call    change_task
.exit:
        ret
;------------------------------------------------------------------------------
uglobal
screen_workarea RECT
display_width_standard dd 0
display_height_standard dd 0
do_not_touch_winmap db 0
window_minimize db 0
sound_flag      db 0
 
endg
 
UID_NONE=0
UID_MENUETOS=1   ;official
UID_KOLIBRI=2    ;russian
 
iglobal
version_inf:
        db 0,7,7,0  ; version 0.7.7.0
        db 0
.rev    dd __REV__
version_end:
endg
;------------------------------------------------------------------------------
align 4
sys_cachetodiskette:
        cmp     ebx, 1
        jb      .no_floppy_save
        cmp     ebx, 2
        ja      .no_floppy_save
        call    save_image
        mov     [esp + 32], eax
        ret
.no_floppy_save:
        mov     [esp + 32], dword 1
        ret
;------------------------------------------------------------------------------
uglobal
;  bgrchanged  dd  0x0
align 4
bgrlockpid dd 0
bgrlock db 0
endg
;------------------------------------------------------------------------------
align 4
sys_background:
        cmp     ebx, 1                     ; BACKGROUND SIZE
        jnz     nosb1
        test    ecx, ecx
        jz      sbgrr
 
        test    edx, edx
        jz      sbgrr
;--------------------------------------
align 4
@@:
;;Maxis use atomic bts for mutexes  4.4.2009
        bts     dword [bgrlock], 0
        jnc     @f
        call    change_task
        jmp     @b
;--------------------------------------
align 4
@@:
        mov     [BgrDataWidth], ecx
        mov     [BgrDataHeight], edx
;    mov   [bgrchanged],1
 
        pushad
; return memory for old background
        mov     eax, [img_background]
        cmp     eax, static_background_data
        jz      @f
        stdcall kernel_free, eax
;--------------------------------------
align 4
@@:
; calculate RAW size
        xor     eax, eax
        inc     eax
        cmp     [BgrDataWidth], eax
        jae     @f
        mov     [BgrDataWidth], eax
;--------------------------------------
align 4
@@:
        cmp     [BgrDataHeight], eax
        jae     @f
        mov     [BgrDataHeight], eax
;--------------------------------------
align 4
@@:
        mov     eax, [BgrDataWidth]
        imul    eax, [BgrDataHeight]
        lea     eax, [eax*3]
; it is reserved with aligned to the boundary of 4 KB pages,
; otherwise there may be exceptions a page fault for vesa20_drawbackground_tiled
; because the 32 bit read is used for  high performance: "mov eax,[esi]"
        shr     eax, 12
        inc     eax
        shl     eax, 12
        mov     [mem_BACKGROUND], eax
; get memory for new background
        stdcall kernel_alloc, eax
        test    eax, eax
        jz      .memfailed
        mov     [img_background], eax
        jmp     .exit
;--------------------------------------
align 4
.memfailed:
; revert to static monotone data
        mov     [img_background], static_background_data
        xor     eax, eax
        inc     eax
        mov     [BgrDataWidth], eax
        mov     [BgrDataHeight], eax
        mov     [mem_BACKGROUND], 4
;--------------------------------------
align 4
.exit:
        popad
        mov     [bgrlock], 0
;--------------------------------------
align 4
sbgrr:
        ret
;------------------------------------------------------------------------------
align 4
nosb1:
        cmp     ebx, 2                     ; SET PIXEL
        jnz     nosb2
 
        mov     eax, [img_background]
        test    ecx, ecx
        jz      @f
        cmp     eax, static_background_data
        jz      .ret
;--------------------------------------
align 4
@@:
        mov     ebx, [mem_BACKGROUND]
        add     ebx, 4095
        and     ebx, -4096
        sub     ebx, 4
        cmp     ecx, ebx
        ja      .ret
 
        mov     ebx, [eax+ecx]
        and     ebx, 0xFF000000;255*256*256*256
        and     edx, 0x00FFFFFF;255*256*256+255*256+255
        add     edx, ebx
        mov     [eax+ecx], edx
;--------------------------------------
align 4
.ret:
        ret
;------------------------------------------------------------------------------
align 4
nosb2:
        cmp     ebx, 3                     ; DRAW BACKGROUND
        jnz     nosb3
;--------------------------------------
align 4
draw_background_temp:
        mov     [background_defined], 1
        call    force_redraw_background
;--------------------------------------
align 4
nosb31:
        ret
;------------------------------------------------------------------------------
align 4
nosb3:
        cmp     ebx, 4                     ; TILED / STRETCHED
        jnz     nosb4
        cmp     ecx, [BgrDrawMode]
        je      nosb41
        mov     [BgrDrawMode], ecx
;--------------------------------------
align 4
nosb41:
        ret
;------------------------------------------------------------------------------
align 4
nosb4:
        cmp     ebx, 5                     ; BLOCK MOVE TO BGR
        jnz     nosb5
        cmp     [img_background], static_background_data
        jnz     @f
        test    edx, edx
        jnz     .fin
        cmp     esi, 4
        ja      .fin
;--------------------------------------
align 4
@@:
  ; bughere
        mov     eax, ecx
        mov     ebx, edx
        add     ebx, [img_background];IMG_BACKGROUND
        mov     ecx, esi
        call    memmove
;--------------------------------------
align 4
.fin:
        ret
;------------------------------------------------------------------------------
align 4
nosb5:
        cmp     ebx, 6
        jnz     nosb6
;--------------------------------------
align 4
;;Maxis use atomic bts for mutex 4.4.2009
@@:
        bts     dword [bgrlock], 0
        jnc     @f
        call    change_task
        jmp     @b
;--------------------------------------
align 4
@@:
        mov     eax, [CURRENT_TASK]
        mov     [bgrlockpid], eax
        cmp     [img_background], static_background_data
        jz      .nomem
        stdcall user_alloc, [mem_BACKGROUND]
        mov     [esp+32], eax
        test    eax, eax
        jz      .nomem
        mov     ebx, eax
        shr     ebx, 12
        or      dword [page_tabs+(ebx-1)*4], DONT_FREE_BLOCK
        mov     esi, [img_background]
        shr     esi, 12
        mov     ecx, [mem_BACKGROUND]
        add     ecx, 0xFFF
        shr     ecx, 12
;--------------------------------------
align 4
.z:
        mov     eax, [page_tabs+ebx*4]
        test    al, 1
        jz      @f
        call    free_page
;--------------------------------------
align 4
@@:
        mov     eax, [page_tabs+esi*4]
        or      al, PG_UWR
        mov     [page_tabs+ebx*4], eax
        mov     eax, ebx
        shl     eax, 12
        invlpg  [eax]
        inc     ebx
        inc     esi
        loop    .z
        ret
;--------------------------------------
align 4
.nomem:
        and     [bgrlockpid], 0
        mov     [bgrlock], 0
;------------------------------------------------------------------------------
align 4
nosb6:
        cmp     ebx, 7
        jnz     nosb7
        cmp     [bgrlock], 0
        jz      .err
        mov     eax, [CURRENT_TASK]
        cmp     [bgrlockpid], eax
        jnz     .err
        mov     eax, ecx
        mov     ebx, ecx
        shr     eax, 12
        mov     ecx, [page_tabs+(eax-1)*4]
        test    cl, USED_BLOCK+DONT_FREE_BLOCK
        jz      .err
        jnp     .err
        push    eax
        shr     ecx, 12
        dec     ecx
;--------------------------------------
align 4
@@:
        and     dword [page_tabs+eax*4], 0
        mov     edx, eax
        shl     edx, 12
        push    eax
        invlpg  [edx]
        pop     eax
        inc     eax
        loop    @b
        pop     eax
        and     dword [page_tabs+(eax-1)*4], not DONT_FREE_BLOCK
        stdcall user_free, ebx
        mov     [esp+32], eax
        and     [bgrlockpid], 0
        mov     [bgrlock], 0
        ret
;--------------------------------------
align 4
.err:
        and     dword [esp+32], 0
        ret
;------------------------------------------------------------------------------
align 4
nosb7:
        cmp     ebx, 8
        jnz     nosb8
 
        mov     ecx, [current_slot]
        xor     eax, eax
        xchg    eax, [ecx+APPDATA.draw_bgr_x]
        mov     [esp + 32], eax ; eax = [left]*65536 + [right]
        xor     eax, eax
        xchg    eax, [ecx+APPDATA.draw_bgr_y]
        mov     [esp + 20], eax ; ebx = [top]*65536 + [bottom]
        ret
;------------------------------------------------------------------------------
align 4
nosb8:
        cmp     ebx, 9
        jnz     nosb9
; ecx = [left]*65536 + [right]
; edx = [top]*65536 + [bottom]
        mov     eax, [_display.width]
        mov     ebx, [_display.height]
        dec     eax
        dec     ebx
; check [right]
        cmp     cx, ax
        ja      .exit
; check [left]
        ror     ecx, 16
        cmp     cx, ax
        ja      .exit
; check [bottom]
        cmp     dx, bx
        ja      .exit
; check [top]
        ror     edx, 16
        cmp     dx, bx
        ja      .exit
 
        movzx   eax, cx  ; [left]
        movzx   ebx, dx  ; [top]
 
        shr     ecx, 16 ; [right]
        shr     edx, 16 ; [bottom]
 
        mov     [background_defined], 1
 
        mov     [draw_data+32 + RECT.left], eax
        mov     [draw_data+32 + RECT.top], ebx
 
        mov     [draw_data+32 + RECT.right], ecx
        mov     [draw_data+32 + RECT.bottom], edx
 
        inc     byte[REDRAW_BACKGROUND]
        call    wakeup_osloop
;--------------------------------------
align 4
.exit:
        ret
;------------------------------------------------------------------------------
align 4
nosb9:
        ret
;------------------------------------------------------------------------------
align 4
uglobal
  BG_Rect_X_left_right  dd   0x0
  BG_Rect_Y_top_bottom  dd   0x0
endg
;------------------------------------------------------------------------------
align 4
force_redraw_background:
        and     [draw_data+32 + RECT.left], 0
        and     [draw_data+32 + RECT.top], 0
        push    eax ebx
        mov     eax, [_display.width]
        mov     ebx, [_display.height]
        dec     eax
        dec     ebx
        mov     [draw_data+32 + RECT.right], eax
        mov     [draw_data+32 + RECT.bottom], ebx
        pop     ebx eax
        inc     byte[REDRAW_BACKGROUND]
        call    wakeup_osloop
        ret
;------------------------------------------------------------------------------
align 4
sys_getbackground:
;    cmp   eax,1                                  ; SIZE
        dec     ebx
        jnz     nogb1
        mov     eax, [BgrDataWidth]
        shl     eax, 16
        mov     ax, word [BgrDataHeight]
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
align 4
nogb1:
;    cmp   eax,2                                  ; PIXEL
        dec     ebx
        jnz     nogb2
 
        mov     eax, [img_background]
        test    ecx, ecx
        jz      @f
        cmp     eax, static_background_data
        jz      .ret
;--------------------------------------
align 4
@@:
        mov     ebx, [mem_BACKGROUND]
        add     ebx, 4095
        and     ebx, -4096
        sub     ebx, 4
        cmp     ecx, ebx
        ja      .ret
 
        mov     eax, [ecx+eax]
 
        and     eax, 0xFFFFFF
        mov     [esp+32], eax
;--------------------------------------
align 4
.ret:
        ret
;------------------------------------------------------------------------------
align 4
nogb2:
 
;    cmp   eax,4                                  ; TILED / STRETCHED
        dec     ebx
        dec     ebx
        jnz     nogb4
        mov     eax, [BgrDrawMode]
;--------------------------------------
align 4
nogb4:
        mov     [esp+32], eax
        ret
;------------------------------------------------------------------------------
align 4
sys_getkey:
        mov     [esp + 32], dword 1
        ; test main buffer
        mov     ebx, [CURRENT_TASK]                          ; TOP OF WINDOW STACK
        movzx   ecx, word [WIN_STACK + ebx * 2]
        mov     edx, [TASK_COUNT]
        cmp     ecx, edx
        jne     .finish
        cmp     [KEY_COUNT], byte 0
        je      .finish
        movzx   ax, byte [KEY_BUFF + 120 + 2]
        shl     eax, 8
        mov     al, byte [KEY_BUFF]
        shl     eax, 8
        push    eax
        dec     byte [KEY_COUNT]
        and     byte [KEY_COUNT], 127
        movzx   ecx, byte [KEY_COUNT]
        add     ecx, 2
        mov     eax, KEY_BUFF + 1
        mov     ebx, KEY_BUFF
        call    memmove
        add     eax, 120 + 2
        add     ebx, 120 + 2
        call    memmove
        pop     eax
;--------------------------------------
align 4
.ret_eax:
        mov     [esp + 32], eax
        ret
;--------------------------------------
align 4
.finish:
; test hotkeys buffer
        mov     ecx, hotkey_buffer
;--------------------------------------
align 4
@@:
        cmp     [ecx], ebx
        jz      .found
        add     ecx, 8
        cmp     ecx, hotkey_buffer + 120 * 8
        jb      @b
        ret
;--------------------------------------
align 4
.found:
        mov     ax, [ecx + 6]
        shl     eax, 16
        mov     ah, [ecx + 4]
        mov     al, 2
        and     dword [ecx + 4], 0
        and     dword [ecx], 0
        jmp     .ret_eax
;------------------------------------------------------------------------------
align 4
sys_getbutton:
        mov     ebx, [CURRENT_TASK]                         ; TOP OF WINDOW STACK
        mov     [esp + 32], dword 1
        movzx   ecx, word [WIN_STACK + ebx * 2]
        mov     edx, [TASK_COUNT] ; less than 256 processes
        cmp     ecx, edx
        jne     .exit
        movzx   eax, byte [BTN_COUNT]
        test    eax, eax
        jz      .exit
        mov     eax, [BTN_BUFF]
        and     al, 0xFE                                    ; delete left button bit
        mov     [BTN_COUNT], byte 0
        mov     [esp + 32], eax
;--------------------------------------
align 4
.exit:
        ret
;------------------------------------------------------------------------------
align 4
sys_cpuusage:
 
;  RETURN:
;
;  +00 dword     process cpu usage
;  +04  word     position in windowing stack
;  +06  word     windowing stack value at current position (cpu nro)
;  +10 12 bytes  name
;  +22 dword     start in mem
;  +26 dword     used mem
;  +30 dword     PID , process idenfification number
;
 
        cmp     ecx, -1 ; who am I ?
        jne     .no_who_am_i
        mov     ecx, [CURRENT_TASK]
  .no_who_am_i:
        cmp     ecx, max_processes
        ja      .nofillbuf
 
; +4: word: position of the window of thread in the window stack
        mov     ax, [WIN_STACK + ecx * 2]
        mov     [ebx+4], ax
; +6: word: number of the thread slot, which window has in the window stack
;           position ecx (has no relation to the specific thread)
        mov     ax, [WIN_POS + ecx * 2]
        mov     [ebx+6], ax
 
        shl     ecx, 5
 
; +0: dword: memory usage
        mov     eax, [ecx+CURRENT_TASK+TASKDATA.cpu_usage]
        mov     [ebx], eax
; +10: 11 bytes: name of the process
        push    ecx
        lea     eax, [ecx*8+SLOT_BASE+APPDATA.app_name]
        add     ebx, 10
        mov     ecx, 11
        call    memmove
        pop     ecx
 
; +22: address of the process in memory
; +26: size of used memory - 1
        push    edi
        lea     edi, [ebx+12]
        xor     eax, eax
        mov     edx, 0x100000*16
        cmp     ecx, 1 shl 5
        je      .os_mem
        mov     edx, [SLOT_BASE+ecx*8+APPDATA.process]
        mov     edx, [edx+PROC.mem_used]
        mov     eax, std_application_base_address
.os_mem:
        stosd
        lea     eax, [edx-1]
        stosd
 
; +30: PID/TID
        mov     eax, [ecx+CURRENT_TASK+TASKDATA.pid]
        stosd
 
    ; window position and size
        push    esi
        lea     esi, [ecx + window_data + WDATA.box]
        movsd
        movsd
        movsd
        movsd
 
    ; Process state (+50)
        mov     eax, dword [ecx+CURRENT_TASK+TASKDATA.state]
        stosd
 
    ; Window client area box
        lea     esi, [ecx*8 + SLOT_BASE + APPDATA.wnd_clientbox]
        movsd
        movsd
        movsd
        movsd
 
    ; Window state
        mov     al, [ecx+window_data+WDATA.fl_wstate]
        stosb
 
    ; Event mask (+71)
        mov     EAX, dword [ECX+CURRENT_TASK+TASKDATA.event_mask]
        stosd
 
    ; Keyboard mode (+75)
        mov     al, byte [ecx*8 + SLOT_BASE + APPDATA.keyboard_mode]
        stosb
 
        pop     esi
        pop     edi
 
.nofillbuf:
    ; return number of processes
 
        mov     eax, [TASK_COUNT]
        mov     [esp+32], eax
        ret
 
align 4
sys_clock:
        cli
  ; Mikhail Lisovin  xx Jan 2005
  @@:
        mov     al, 10
        out     0x70, al
        in      al, 0x71
        test    al, al
        jns     @f
        mov     esi, 1
        call    delay_ms
        jmp     @b
  @@:
  ; end Lisovin's fix
 
        xor     al, al        ; seconds
        out     0x70, al
        in      al, 0x71
        movzx   ecx, al
        mov     al, 02        ; minutes
        shl     ecx, 16
        out     0x70, al
        in      al, 0x71
        movzx   edx, al
        mov     al, 04        ; hours
        shl     edx, 8
        out     0x70, al
        in      al, 0x71
        add     ecx, edx
        movzx   edx, al
        add     ecx, edx
        sti
        mov     [esp + 32], ecx
        ret
 
 
align 4
 
sys_date:
 
        cli
  @@:
        mov     al, 10
        out     0x70, al
        in      al, 0x71
        test    al, al
        jns     @f
        mov     esi, 1
        call    delay_ms
        jmp     @b
  @@:
 
        mov     ch, 0
        mov     al, 7           ; date
        out     0x70, al
        in      al, 0x71
        mov     cl, al
        mov     al, 8           ; month
        shl     ecx, 16
        out     0x70, al
        in      al, 0x71
        mov     ch, al
        mov     al, 9           ; year
        out     0x70, al
        in      al, 0x71
        mov     cl, al
        sti
        mov     [esp+32], ecx
        ret
 
 
; redraw status
 
sys_redrawstat:
        cmp     ebx, 1
        jne     no_widgets_away
        ; buttons away
        mov     ecx, [CURRENT_TASK]
  sys_newba2:
        mov     edi, [BTN_ADDR]
        cmp     [edi], dword 0  ; empty button list ?
        je      end_of_buttons_away
        movzx   ebx, word [edi]
        inc     ebx
        mov     eax, edi
  sys_newba:
        dec     ebx
        jz      end_of_buttons_away
 
        add     eax, 0x10
        cmp     cx, [eax]
        jnz     sys_newba
 
        push    eax ebx ecx
        mov     ecx, ebx
        inc     ecx
        shl     ecx, 4
        mov     ebx, eax
        add     eax, 0x10
        call    memmove
        dec     dword [edi]
        pop     ecx ebx eax
 
        jmp     sys_newba2
 
  end_of_buttons_away:
 
        ret
 
  no_widgets_away:
 
        cmp     ebx, 2
        jnz     srl1
 
        mov     edx, [TASK_BASE]      ; return whole screen draw area for this app
        add     edx, draw_data - CURRENT_TASK
        mov     [edx + RECT.left], 0
        mov     [edx + RECT.top], 0
        mov     eax, [_display.width]
        dec     eax
        mov     [edx + RECT.right], eax
        mov     eax, [_display.height]
        dec     eax
        mov     [edx + RECT.bottom], eax
 
  srl1:
        ret
 
;ok - 100% work
;nt - not tested
;---------------------------------------------------------------------------------------------
;eax
;0 - task switch counter. Ret switch counter in eax. Block. ok.
;1 - change task. Ret nothing. Block. ok.
;2 - performance control
; ebx
; 0 - enable or disable (inversion) PCE flag on CR4 for rdmpc in user mode.
; returned new cr4 in eax. Ret cr4 in eax. Block. ok.
; 1 - is cache enabled. Ret cr0 in eax if enabled else zero in eax. Block. ok.
; 2 - enable cache. Ret 1 in eax. Ret nothing. Block. ok.
; 3 - disable cache. Ret 0 in eax. Ret nothing. Block. ok.
;eax
;3 - rdmsr. Counter in edx. (edx:eax) [esi:edi, edx] => [edx:esi, ecx]. Ret in ebx:eax. Block. ok.
;4 - wrmsr. Counter in edx. (edx:eax) [esi:edi, edx] => [edx:esi, ecx]. Ret in ebx:eax. Block. ok.
;---------------------------------------------------------------------------------------------
iglobal
align 4
sheduler:
        dd      sys_sheduler.00
        dd      change_task
        dd      sys_sheduler.02
        dd      sys_sheduler.03
        dd      sys_sheduler.04
endg
sys_sheduler:
;rewritten by   29.12.2009
        jmp     dword [sheduler+ebx*4]
;.shed_counter:
.00:
        mov     eax, [context_counter]
        mov     [esp+32], eax
        ret
 
.02:
;.perf_control:
        inc     ebx                     ;before ebx=2, ebx=3
        cmp     ebx, ecx                ;if ecx=3, ebx=3
        jz      cache_disable
 
        dec     ebx                     ;ebx=2
        cmp     ebx, ecx                ;
        jz      cache_enable            ;if ecx=2 and ebx=2
 
        dec     ebx                     ;ebx=1
        cmp     ebx, ecx
        jz      is_cache_enabled        ;if ecx=1 and ebx=1
 
        dec     ebx
        test    ebx, ecx                ;ebx=0 and ecx=0
        jz      modify_pce              ;if ecx=0
 
        ret
 
.03:
;.rdmsr_instr:
;now counter in ecx
;(edx:eax) esi:edi => edx:esi
        mov     eax, esi
        mov     ecx, edx
        rdmsr
        mov     [esp+32], eax
        mov     [esp+20], edx           ;ret in ebx?
        ret
 
.04:
;.wrmsr_instr:
;now counter in ecx
;(edx:eax) esi:edi => edx:esi
        ; Fast Call MSR can't be destroy
        ; Но MSR_AMD_EFER можно изменять, т.к. в этом регистре лиш
        ; включаются/выключаются расширенные возможности
        cmp     edx, MSR_SYSENTER_CS
        je      @f
        cmp     edx, MSR_SYSENTER_ESP
        je      @f
        cmp     edx, MSR_SYSENTER_EIP
        je      @f
        cmp     edx, MSR_AMD_STAR
        je      @f
 
        mov     eax, esi
        mov     ecx, edx
        wrmsr
        ; mov   [esp + 32], eax
        ; mov   [esp + 20], edx ;ret in ebx?
@@:
        ret
 
cache_disable:
        mov     eax, cr0
        or      eax, 01100000000000000000000000000000b
        mov     cr0, eax
        wbinvd  ;set MESI
        ret
 
cache_enable:
        mov     eax, cr0
        and     eax, 10011111111111111111111111111111b
        mov     cr0, eax
        ret
 
is_cache_enabled:
        mov     eax, cr0
        mov     ebx, eax
        and     eax, 01100000000000000000000000000000b
        jz      cache_disabled
        mov     [esp+32], ebx
cache_disabled:
        mov     dword [esp+32], eax;0
        ret
 
modify_pce:
        mov     eax, cr4
;       mov ebx,0
;       or  bx,100000000b ;pce
;       xor eax,ebx ;invert pce
        bts     eax, 8;pce=cr4[8]
        mov     cr4, eax
        mov     [esp+32], eax
        ret
;---------------------------------------------------------------------------------------------
 
 
iglobal
  cpustring db 'CPU',0
endg
 
uglobal
background_defined    db    0    ; diamond, 11.04.2006
endg
;-----------------------------------------------------------------------------
align 4
checkmisc:
        cmp     [ctrl_alt_del], 1
        jne     nocpustart
 
        mov     ebp, cpustring
        call    fs_execute_from_sysdir
 
        mov     [ctrl_alt_del], 0
;--------------------------------------
align 4
nocpustart:
        cmp     [mouse_active], 1
        jne     mouse_not_active
        mov     [mouse_active], 0
 
        xor     edi, edi
        mov     ebx, CURRENT_TASK
 
        mov     ecx, [TASK_COUNT]
        movzx   eax, word [WIN_POS + ecx*2]     ; active window
        shl     eax, 8
        push    eax
 
        movzx   eax, word [MOUSE_X]
        movzx   edx, word [MOUSE_Y]
;--------------------------------------
align 4
.set_mouse_event:
        add     edi, 256
        add     ebx, 32
        test    [ebx+TASKDATA.event_mask], 0x80000000
        jz      .pos_filter
 
        cmp     edi, [esp]                      ; skip if filtration active
        jne     .skip
;--------------------------------------
align 4
.pos_filter:
        test    [ebx+TASKDATA.event_mask], 0x40000000
        jz      .set
 
        mov     esi, [ebx-twdw+WDATA.box.left]
        cmp     eax, esi
        jb      .skip
        add     esi, [ebx-twdw+WDATA.box.width]
        cmp     eax, esi
        ja      .skip
 
        mov     esi, [ebx-twdw+WDATA.box.top]
        cmp     edx, esi
        jb      .skip
        add     esi, [ebx-twdw+WDATA.box.height]
        cmp     edx, esi
        ja      .skip
;--------------------------------------
align 4
.set:
        or      [edi+SLOT_BASE+APPDATA.event_mask], 100000b  ; set event 6
;--------------------------------------
align 4
.skip:
        loop    .set_mouse_event
 
        pop     eax
;--------------------------------------
align 4
mouse_not_active:
        cmp     byte[REDRAW_BACKGROUND], 0         ; background update ?
        jz      nobackgr
 
        cmp     [background_defined], 0
        jz      nobackgr
;--------------------------------------
align 4
backgr:
        mov     eax, [draw_data+32 + RECT.left]
        shl     eax, 16
        add     eax, [draw_data+32 + RECT.right]
        mov     [BG_Rect_X_left_right], eax ; [left]*65536 + [right]
 
        mov     eax, [draw_data+32 + RECT.top]
        shl     eax, 16
        add     eax, [draw_data+32 + RECT.bottom]
        mov     [BG_Rect_Y_top_bottom], eax ; [top]*65536 + [bottom]
 
        call    drawbackground
;        DEBUGF  1, "K : drawbackground\n"
;        DEBUGF  1, "K : backg x %x\n",[BG_Rect_X_left_right]
;        DEBUGF  1, "K : backg y %x\n",[BG_Rect_Y_top_bottom]
;--------- set event 5 start ----------
        push    ecx edi
        xor     edi, edi
        mov     ecx, [TASK_COUNT]
;--------------------------------------
align 4
set_bgr_event:
        add     edi, 256
        mov     eax, [BG_Rect_X_left_right]
        mov     edx, [BG_Rect_Y_top_bottom]
        cmp     [edi+SLOT_BASE+APPDATA.draw_bgr_x], 0
        jz      .set
.join:
        cmp     word [edi+SLOT_BASE+APPDATA.draw_bgr_x], ax
        jae     @f
        mov     word [edi+SLOT_BASE+APPDATA.draw_bgr_x], ax
@@:
        shr     eax, 16
        cmp     word [edi+SLOT_BASE+APPDATA.draw_bgr_x+2], ax
        jbe     @f
        mov     word [edi+SLOT_BASE+APPDATA.draw_bgr_x+2], ax
@@:
        cmp     word [edi+SLOT_BASE+APPDATA.draw_bgr_y], dx
        jae     @f
        mov     word [edi+SLOT_BASE+APPDATA.draw_bgr_y], dx
@@:
        shr     edx, 16
        cmp     word [edi+SLOT_BASE+APPDATA.draw_bgr_y+2], dx
        jbe     @f
        mov     word [edi+SLOT_BASE+APPDATA.draw_bgr_y+2], dx
@@:
        jmp     .common
.set:
        mov     [edi+SLOT_BASE+APPDATA.draw_bgr_x], eax
        mov     [edi+SLOT_BASE+APPDATA.draw_bgr_y], edx
.common:
        or      [edi+SLOT_BASE+APPDATA.event_mask], 10000b  ; set event 5
        loop    set_bgr_event
        pop     edi ecx
;--------- set event 5 stop -----------
        dec     byte[REDRAW_BACKGROUND]    ; got new update request?
        jnz     backgr
 
        xor     eax, eax
        mov     [draw_data+32 + RECT.left], eax
        mov     [draw_data+32 + RECT.top], eax
        mov     [draw_data+32 + RECT.right], eax
        mov     [draw_data+32 + RECT.bottom], eax
;--------------------------------------
align 4
nobackgr:
; system shutdown request
        cmp     [SYS_SHUTDOWN], byte 0
        je      noshutdown
 
        mov     edx, [shutdown_processes]
 
        cmp     [SYS_SHUTDOWN], dl
        jne     noshutdown
 
        lea     ecx, [edx-1]
        mov     edx, OS_BASE+0x3040
        jecxz   no_mark_system_shutdown
;--------------------------------------
align 4
markz:
        push    ecx edx
        cmp     [edx+TASKDATA.state], TSTATE_FREE
        jz      .nokill
        lea     edx, [(edx-(CURRENT_TASK and 1FFFFFFFh))*8+SLOT_BASE]
        cmp     [edx+APPDATA.process], sys_proc
        jz      .nokill
        call    request_terminate
        jmp     .common
.nokill:
        dec     byte [SYS_SHUTDOWN]
        xor     eax, eax
.common:
        pop     edx ecx
        test    eax, eax
        jz      @f
        mov     [edx+TASKDATA.state], TSTATE_ZOMBIE
@@:
        add     edx, 0x20
        loop    markz
        call    wakeup_osloop
;--------------------------------------
align 4
@@:
no_mark_system_shutdown:
        dec     byte [SYS_SHUTDOWN]
        je      system_shutdown
;--------------------------------------
align 4
noshutdown:
        mov     eax, [TASK_COUNT]           ; termination
        mov     ebx, TASK_DATA+TASKDATA.state
        mov     esi, 1
;--------------------------------------
align 4
newct:
        mov     cl, [ebx]
        cmp     cl, byte 3
        jz      .terminate
 
        cmp     cl, byte 4
        jnz     .noterminate
.terminate:
        pushad
        mov     ecx, eax
        shl     ecx, 8
        add     ecx, SLOT_BASE
        call    restore_default_cursor_before_killing
        popad
 
        pushad
        call    terminate
        popad
        cmp     byte [SYS_SHUTDOWN], 0
        jz      .noterminate
        dec     byte [SYS_SHUTDOWN]
        je      system_shutdown
 
.noterminate:
        add     ebx, 0x20
        inc     esi
        dec     eax
        jnz     newct
        ret
;-----------------------------------------------------------------------------
align 4
redrawscreen:
; eax , if process window_data base is eax, do not set flag/limits
 
        pushad
        push    eax
 
;;;         mov   ebx,2
;;;         call  delay_hs
 
         ;mov   ecx,0               ; redraw flags for apps
        xor     ecx, ecx
;--------------------------------------
align 4
newdw2:
        inc     ecx
        push    ecx
 
        mov     eax, ecx
        shl     eax, 5
        add     eax, window_data
 
        cmp     eax, [esp+4]
        je      not_this_task
                                   ; check if window in redraw area
        mov     edi, eax
 
        cmp     ecx, 1             ; limit for background
        jz      bgli
 
        mov     eax, [esp+4]        ;if upper in z-position - no redraw
        test    eax, eax
        jz      @f
        mov     al, [eax + WDATA.z_modif]
        cmp     [edi + WDATA.z_modif], al
        jg      ricino
      @@:
 
        mov     eax, [edi + WDATA.box.left]
        mov     ebx, [edi + WDATA.box.top]
 
        mov     ecx, [draw_limits.bottom] ; ecx = area y end     ebx = window y start
        cmp     ecx, ebx
        jb      ricino
 
        mov     ecx, [draw_limits.right] ; ecx = area x end     eax = window x start
        cmp     ecx, eax
        jb      ricino
 
        mov     eax, [edi + WDATA.box.left]
        mov     ebx, [edi + WDATA.box.top]
        mov     ecx, [edi + WDATA.box.width]
        mov     edx, [edi + WDATA.box.height]
        add     ecx, eax
        add     edx, ebx
 
        mov     eax, [draw_limits.top]  ; eax = area y start     edx = window y end
        cmp     edx, eax
        jb      ricino
 
        mov     eax, [draw_limits.left]  ; eax = area x start     ecx = window x end
        cmp     ecx, eax
        jb      ricino
;--------------------------------------
align 4
bgli:
        cmp     dword[esp], 1
        jnz     .az
 
        cmp     byte[REDRAW_BACKGROUND], 0
        jz      .az
 
        mov     dl, 0
        lea     eax, [edi+draw_data-window_data]
        mov     ebx, [draw_limits.left]
        cmp     ebx, [eax+RECT.left]
        jae     @f
 
        mov     [eax+RECT.left], ebx
        mov     dl, 1
;--------------------------------------
align 4
@@:
        mov     ebx, [draw_limits.top]
        cmp     ebx, [eax+RECT.top]
        jae     @f
 
        mov     [eax+RECT.top], ebx
        mov     dl, 1
;--------------------------------------
align 4
@@:
        mov     ebx, [draw_limits.right]
        cmp     ebx, [eax+RECT.right]
        jbe     @f
 
        mov     [eax+RECT.right], ebx
        mov     dl, 1
;--------------------------------------
align 4
@@:
        mov     ebx, [draw_limits.bottom]
        cmp     ebx, [eax+RECT.bottom]
        jbe     @f
 
        mov     [eax+RECT.bottom], ebx
        mov     dl, 1
;--------------------------------------
align 4
@@:
        add     byte[REDRAW_BACKGROUND], dl
        call    wakeup_osloop
        jmp     newdw8
;--------------------------------------
align 4
.az:
        mov     eax, edi
        add     eax, draw_data-window_data
 
        mov     ebx, [draw_limits.left]        ; set limits
        mov     [eax + RECT.left], ebx
        mov     ebx, [draw_limits.top]
        mov     [eax + RECT.top], ebx
        mov     ebx, [draw_limits.right]
        mov     [eax + RECT.right], ebx
        mov     ebx, [draw_limits.bottom]
        mov     [eax + RECT.bottom], ebx
 
        sub     eax, draw_data-window_data
 
        cmp     dword [esp], 1
        jne     nobgrd
        inc     byte[REDRAW_BACKGROUND]
        call    wakeup_osloop
;--------------------------------------
align 4
newdw8:
nobgrd:
;--------------------------------------
        push    eax  edi ebp
        mov     edi, [esp+12]
        cmp     edi, 1
        je      .found
 
        mov     eax, [draw_limits.left]
        mov     ebx, [draw_limits.top]
        mov     ecx, [draw_limits.right]
        sub     ecx, eax
        test    ecx, ecx
        jz      .not_found
 
        mov     edx, [draw_limits.bottom]
        sub     edx, ebx
        test    edx, edx
        jz      .not_found
 
; eax - x, ebx - y
; ecx - size x, edx - size y
        add     ebx, edx
;--------------------------------------
align 4
.start_y:
        push    ecx
;--------------------------------------
align 4
.start_x:
        add     eax, ecx
        mov     ebp, [d_width_calc_area + ebx*4]
        add     ebp, [_display.win_map]
        movzx   ebp, byte[eax+ebp] ; get value for current point
        cmp     ebp, edi
        jne     @f
 
        pop     ecx
        jmp     .found
;--------------------------------------
align 4
@@:
        sub     eax, ecx
 
        dec     ecx
        jnz     .start_x
 
        pop     ecx
        dec     ebx
        dec     edx
        jnz     .start_y
;--------------------------------------
align 4
.not_found:
        pop     ebp edi eax
        jmp     ricino
;--------------------------------------
align 4
.found:
        pop     ebp edi eax
 
        mov     [eax + WDATA.fl_redraw], byte 1  ; mark as redraw
;--------------------------------------
align 4
ricino:
not_this_task:
        pop     ecx
 
        cmp     ecx, [TASK_COUNT]
        jle     newdw2
 
        pop     eax
        popad
        ret
;-----------------------------------------------------------------------------
align 4
calculatebackground:   ; background
        mov     edi, [_display.win_map]              ; set os to use all pixels
        mov     eax, 0x01010101
        mov     ecx, [_display.win_map_size]
        shr     ecx, 2
        rep stosd
 
        mov     byte[REDRAW_BACKGROUND], 0            ; do not draw background!
        ret
;-----------------------------------------------------------------------------
uglobal
  imax    dd 0x0
endg
;-----------------------------------------------------------------------------
align 4
delay_ms:     ; delay in 1/1000 sec
        push    eax
        push    ecx
 
        mov     ecx, esi
        ; 
        imul    ecx, 33941
        shr     ecx, 9
        ; 
 
        in      al, 0x61
        and     al, 0x10
        mov     ah, al
        cld
;--------------------------------------
align 4
cnt1:
        in      al, 0x61
        and     al, 0x10
        cmp     al, ah
        jz      cnt1
 
        mov     ah, al
        loop    cnt1
 
        pop     ecx
        pop     eax
        ret
;-----------------------------------------------------------------------------
align 4
set_app_param:
        mov     edi, [TASK_BASE]
        mov     eax, ebx
        btr     eax, 3                           ; move MOUSE_FILTRATION
        mov     ebx, [current_slot]              ; bit into event_filter
        setc    byte [ebx+APPDATA.event_filter]
        xchg    eax, [edi + TASKDATA.event_mask] ; set new event mask
        mov     [esp+32], eax                    ; return old mask value
        ret
;-----------------------------------------------------------------------------
 
; this is for syscall
proc delay_hs_unprotected
        call    unprotect_from_terminate
        call    delay_hs
        call    protect_from_terminate
        ret
endp
 
if 1
align 4
delay_hs:     ; delay in 1/100 secs
; ebx = delay time
 
        pushad
        push    ebx
        xor     esi, esi
        mov     ecx, MANUAL_DESTROY
        call    create_event
        test    eax, eax
        jz      .done
 
        mov     ebx, edx
        mov     ecx, [esp]
        push    edx
        push    eax
        call    wait_event_timeout
        pop     eax
        pop     ebx
        call    destroy_event
.done:
        add     esp, 4
        popad
        ret
 
else
 
align 4
delay_hs:     ; delay in 1/100 secs
; ebx = delay time
        push    ecx
        push    edx
 
        mov     edx, [timer_ticks]
;--------------------------------------
align 4
newtic:
        mov     ecx, [timer_ticks]
        sub     ecx, edx
        cmp     ecx, ebx
        jae     zerodelay
 
        call    change_task
 
        jmp     newtic
;--------------------------------------
align 4
zerodelay:
        pop     edx
        pop     ecx
        ret
end if
 
;-----------------------------------------------------------------------------
align 16        ;very often call this subrutine
memmove:       ; memory move in bytes
; eax = from
; ebx = to
; ecx = no of bytes
        test    ecx, ecx
        jle     .ret
 
        push    esi edi ecx
 
        mov     edi, ebx
        mov     esi, eax
 
        test    ecx, not 11b
        jz      @f
 
        push    ecx
        shr     ecx, 2
        rep movsd
        pop     ecx
        and     ecx, 11b
        jz      .finish
;--------------------------------------
align 4
@@:
        rep movsb
;--------------------------------------
align 4
.finish:
        pop     ecx edi esi
;--------------------------------------
align 4
.ret:
        ret
;-----------------------------------------------------------------------------
;  Sysfunction 34, read_floppy_file, is obsolete. Use 58 or 70 function instead.
;align 4
;
;read_floppy_file:
;
;; as input
;;
;; eax pointer to file
;; ebx file lenght
;; ecx start 512 byte block number
;; edx number of blocks to read
;; esi pointer to return/work area (atleast 20 000 bytes)
;;
;;
;; on return
;;
;; eax = 0 command succesful
;;       1 no fd base and/or partition defined
;;       2 yet unsupported FS
;;       3 unknown FS
;;       4 partition not defined at hd
;;       5 file not found
;; ebx = size of file
;
;     mov   edi,[TASK_BASE]
;     add   edi,0x10
;     add   esi,[edi]
;     add   eax,[edi]
;
;     pushad
;     mov  edi,esi
;     add  edi,1024
;     mov  esi,0x100000+19*512
;     sub  ecx,1
;     shl  ecx,9
;     add  esi,ecx
;     shl  edx,9
;     mov  ecx,edx
;     cld
;     rep  movsb
;     popad
;
;     mov   [esp+36],eax
;     mov   [esp+24],ebx
;     ret
 
 
 
align 4
set_io_access_rights:
        push    edi eax
        mov     edi, tss._io_map_0
;     mov   ecx,eax
;     and   ecx,7    ; offset in byte
;     shr   eax,3    ; number of byte
;     add   edi,eax
;     mov   ebx,1
;     shl   ebx,cl
        test    ebp, ebp
;     cmp   ebp,0                ; enable access - ebp = 0
        jnz     .siar1
;     not   ebx
;     and   [edi],byte bl
        btr     [edi], eax
        pop     eax edi
        ret
.siar1:
        bts     [edi], eax
  ;  or    [edi],byte bl        ; disable access - ebp = 1
        pop     eax edi
        ret
;reserve/free group of ports
;  * eax = 46 - number function
;  * ebx = 0 - reserve, 1 - free
;  * ecx = number start arrea of ports
;  * edx = number end arrea of ports (include last number of port)
;Return value:
;  * eax = 0 - succesful
;  * eax = 1 - error
;  * The system has reserve this ports:
;    0..0x2d, 0x30..0x4d, 0x50..0xdf, 0xe5..0xff (include last number of port).
;destroys eax,ebx, ebp
r_f_port_area:
 
        test    ebx, ebx
        jnz     free_port_area
;     je    r_port_area
;     jmp   free_port_area
 
;   r_port_area:
 
;     pushad
 
        cmp     ecx, edx      ; beginning > end ?
        ja      rpal1
        cmp     edx, 65536
        jae     rpal1
        mov     eax, [RESERVED_PORTS]
        test    eax, eax      ; no reserved areas ?
        je      rpal2
        cmp     eax, 255      ; max reserved
        jae     rpal1
 rpal3:
        mov     ebx, eax
        shl     ebx, 4
        add     ebx, RESERVED_PORTS
        cmp     ecx, [ebx+8]
        ja      rpal4
        cmp     edx, [ebx+4]
        jae     rpal1
;     jb    rpal4
;     jmp   rpal1
 rpal4:
        dec     eax
        jnz     rpal3
        jmp     rpal2
   rpal1:
;     popad
;     mov   eax,1
        xor     eax, eax
        inc     eax
        ret
   rpal2:
;     popad
     ; enable port access at port IO map
        cli
        pushad                        ; start enable io map
 
        cmp     edx, 65536;16384
        jae     no_unmask_io; jge
        mov     eax, ecx
;       push    ebp
        xor     ebp, ebp               ; enable - eax = port
new_port_access:
;     pushad
        call    set_io_access_rights
;     popad
        inc     eax
        cmp     eax, edx
        jbe     new_port_access
;       pop     ebp
no_unmask_io:
        popad                         ; end enable io map
        sti
 
        mov     eax, [RESERVED_PORTS]
        add     eax, 1
        mov     [RESERVED_PORTS], eax
        shl     eax, 4
        add     eax, RESERVED_PORTS
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx+TASKDATA.pid]
        mov     [eax], ebx
        mov     [eax+4], ecx
        mov     [eax+8], edx
 
        xor     eax, eax
        ret
 
free_port_area:
 
;     pushad
        mov     eax, [RESERVED_PORTS]; no reserved areas ?
        test    eax, eax
        jz      frpal2
        mov     ebx, [TASK_BASE]
        mov     ebx, [ebx+TASKDATA.pid]
   frpal3:
        mov     edi, eax
        shl     edi, 4
        add     edi, RESERVED_PORTS
        cmp     ebx, [edi]
        jne     frpal4
        cmp     ecx, [edi+4]
        jne     frpal4
        cmp     edx, [edi+8]
        jne     frpal4
        jmp     frpal1
   frpal4:
        dec     eax
        jnz     frpal3
   frpal2:
;     popad
        inc     eax
        ret
   frpal1:
        push    ecx
        mov     ecx, 256
        sub     ecx, eax
        shl     ecx, 4
        mov     esi, edi
        add     esi, 16
        cld
        rep movsb
 
        dec     dword [RESERVED_PORTS]
;popad
;disable port access at port IO map
 
;     pushad                        ; start disable io map
        pop     eax     ;start port
        cmp     edx, 65536;16384
        jge     no_mask_io
 
;     mov   eax,ecx
        xor     ebp, ebp
        inc     ebp
new_port_access_disable:
;     pushad
;     mov   ebp,1                  ; disable - eax = port
        call    set_io_access_rights
;     popad
        inc     eax
        cmp     eax, edx
        jbe     new_port_access_disable
no_mask_io:
;     popad                         ; end disable io map
        xor     eax, eax
        ret
;-----------------------------------------------------------------------------
align 4
drawbackground:
dbrv20:
        cmp     [BgrDrawMode], dword 1
        jne     bgrstr
        call    vesa20_drawbackground_tiled
;        call    [draw_pointer]
        call    __sys_draw_pointer
        ret
;--------------------------------------
align 4
bgrstr:
        call    vesa20_drawbackground_stretch
;        call    [draw_pointer]
        call    __sys_draw_pointer
        ret
;-----------------------------------------------------------------------------
align 4
syscall_putimage:                       ; PutImage
sys_putimage:
        test    ecx, 0x80008000
        jnz     .exit
        test    ecx, 0x0000FFFF
        jz      .exit
        test    ecx, 0xFFFF0000
        jnz     @f
;--------------------------------------
align 4
.exit:
        ret
;--------------------------------------
align 4
@@:
        mov     edi, [current_slot]
        add     dx, word[edi+APPDATA.wnd_clientbox.top]
        rol     edx, 16
        add     dx, word[edi+APPDATA.wnd_clientbox.left]
        rol     edx, 16
;--------------------------------------
align 4
.forced:
        push    ebp esi 0
        mov     ebp, putimage_get24bpp
        mov     esi, putimage_init24bpp
;--------------------------------------
align 4
sys_putimage_bpp:
        call    vesa20_putimage
        pop     ebp esi ebp
        ret
;        jmp     [draw_pointer]
;-----------------------------------------------------------------------------
align 4
sys_putimage_palette:
; ebx = pointer to image
; ecx = [xsize]*65536 + [ysize]
; edx = [xstart]*65536 + [ystart]
; esi = number of bits per pixel, must be 8, 24 or 32
; edi = pointer to palette
; ebp = row delta
        mov     eax, [CURRENT_TASK]
        shl     eax, 8
        add     dx, word [eax+SLOT_BASE+APPDATA.wnd_clientbox.top]
        rol     edx, 16
        add     dx, word [eax+SLOT_BASE+APPDATA.wnd_clientbox.left]
        rol     edx, 16
;--------------------------------------
align 4
.forced:
        cmp     esi, 1
        jnz     @f
        push    edi
        mov     eax, [edi+4]
        sub     eax, [edi]
        push    eax
        push    dword [edi]
        push    0ffffff80h
        mov     edi, esp
        call    put_mono_image
        add     esp, 12
        pop     edi
        ret
;--------------------------------------
align 4
@@:
        cmp     esi, 2
        jnz     @f
        push    edi
        push    0ffffff80h
        mov     edi, esp
        call    put_2bit_image
        pop     eax
        pop     edi
        ret
;--------------------------------------
align 4
@@:
        cmp     esi, 4
        jnz     @f
        push    edi
        push    0ffffff80h
        mov     edi, esp
        call    put_4bit_image
        pop     eax
        pop     edi
        ret
;--------------------------------------
align 4
@@:
        push    ebp esi ebp
        cmp     esi, 8
        jnz     @f
        mov     ebp, putimage_get8bpp
        mov     esi, putimage_init8bpp
        jmp     sys_putimage_bpp
;--------------------------------------
align 4
@@:
        cmp     esi, 9
        jnz     @f
        mov     ebp, putimage_get9bpp
        mov     esi, putimage_init9bpp
        jmp     sys_putimage_bpp
;--------------------------------------
align 4
@@:
        cmp     esi, 15
        jnz     @f
        mov     ebp, putimage_get15bpp
        mov     esi, putimage_init15bpp
        jmp     sys_putimage_bpp
;--------------------------------------
align 4
@@:
        cmp     esi, 16
        jnz     @f
        mov     ebp, putimage_get16bpp
        mov     esi, putimage_init16bpp
        jmp     sys_putimage_bpp
;--------------------------------------
align 4
@@:
        cmp     esi, 24
        jnz     @f
        mov     ebp, putimage_get24bpp
        mov     esi, putimage_init24bpp
        jmp     sys_putimage_bpp
;--------------------------------------
align 4
@@:
        cmp     esi, 32
        jnz     @f
        mov     ebp, putimage_get32bpp
        mov     esi, putimage_init32bpp
        jmp     sys_putimage_bpp
;--------------------------------------
align 4
@@:
        pop     ebp esi ebp
        ret
;-----------------------------------------------------------------------------
align 4
put_mono_image:
        push    ebp esi ebp
        mov     ebp, putimage_get1bpp
        mov     esi, putimage_init1bpp
        jmp     sys_putimage_bpp
;-----------------------------------------------------------------------------
align 4
put_2bit_image:
        push    ebp esi ebp
        mov     ebp, putimage_get2bpp
        mov     esi, putimage_init2bpp
        jmp     sys_putimage_bpp
;-----------------------------------------------------------------------------
align 4
put_4bit_image:
        push    ebp esi ebp
        mov     ebp, putimage_get4bpp
        mov     esi, putimage_init4bpp
        jmp     sys_putimage_bpp
;-----------------------------------------------------------------------------
align 4
putimage_init24bpp:
        lea     eax, [eax*3]
putimage_init8bpp:
putimage_init9bpp:
        ret
;-----------------------------------------------------------------------------
align 16
putimage_get24bpp:
        movzx   eax, byte [esi+2]
        shl     eax, 16
        mov     ax, [esi]
        add     esi, 3
        ret     4
;-----------------------------------------------------------------------------
align 16
putimage_get8bpp:
        movzx   eax, byte [esi]
        push    edx
        mov     edx, [esp+8]
        mov     eax, [edx+eax*4]
        pop     edx
        inc     esi
        ret     4
;-----------------------------------------------------------------------------
align 16
putimage_get9bpp:
        lodsb
        mov     ah, al
        shl     eax, 8
        mov     al, ah
        ret     4
;-----------------------------------------------------------------------------
align 4
putimage_init1bpp:
        add     eax, ecx
        push    ecx
        add     eax, 7
        add     ecx, 7
        shr     eax, 3
        shr     ecx, 3
        sub     eax, ecx
        pop     ecx
        ret
;-----------------------------------------------------------------------------
align 16
putimage_get1bpp:
        push    edx
        mov     edx, [esp+8]
        mov     al, [edx]
        add     al, al
        jnz     @f
        lodsb
        adc     al, al
@@:
        mov     [edx], al
        sbb     eax, eax
        and     eax, [edx+8]
        add     eax, [edx+4]
        pop     edx
        ret     4
;-----------------------------------------------------------------------------
align 4
putimage_init2bpp:
        add     eax, ecx
        push    ecx
        add     ecx, 3
        add     eax, 3
        shr     ecx, 2
        shr     eax, 2
        sub     eax, ecx
        pop     ecx
        ret
;-----------------------------------------------------------------------------
align 16
putimage_get2bpp:
        push    edx
        mov     edx, [esp+8]
        mov     al, [edx]
        mov     ah, al
        shr     al, 6
        shl     ah, 2
        jnz     .nonewbyte
        lodsb
        mov     ah, al
        shr     al, 6
        shl     ah, 2
        add     ah, 1
.nonewbyte:
        mov     [edx], ah
        mov     edx, [edx+4]
        movzx   eax, al
        mov     eax, [edx+eax*4]
        pop     edx
        ret     4
;-----------------------------------------------------------------------------
align 4
putimage_init4bpp:
        add     eax, ecx
        push    ecx
        add     ecx, 1
        add     eax, 1
        shr     ecx, 1
        shr     eax, 1
        sub     eax, ecx
        pop     ecx
        ret
;-----------------------------------------------------------------------------
align 16
putimage_get4bpp:
        push    edx
        mov     edx, [esp+8]
        add     byte [edx], 80h
        jc      @f
        movzx   eax, byte [edx+1]
        mov     edx, [edx+4]
        and     eax, 0x0F
        mov     eax, [edx+eax*4]
        pop     edx
        ret     4
@@:
        movzx   eax, byte [esi]
        add     esi, 1
        mov     [edx+1], al
        shr     eax, 4
        mov     edx, [edx+4]
        mov     eax, [edx+eax*4]
        pop     edx
        ret     4
;-----------------------------------------------------------------------------
align 4
putimage_init32bpp:
        shl     eax, 2
        ret
;-----------------------------------------------------------------------------
align 16
putimage_get32bpp:
        lodsd
        ret     4
;-----------------------------------------------------------------------------
align 4
putimage_init15bpp:
putimage_init16bpp:
        add     eax, eax
        ret
;-----------------------------------------------------------------------------
align 16
putimage_get15bpp:
; 0RRRRRGGGGGBBBBB -> 00000000RRRRR000GGGGG000BBBBB000
        push    ecx edx
        movzx   eax, word [esi]
        add     esi, 2
        mov     ecx, eax
        mov     edx, eax
        and     eax, 0x1F
        and     ecx, 0x1F shl 5
        and     edx, 0x1F shl 10
        shl     eax, 3
        shl     ecx, 6
        shl     edx, 9
        or      eax, ecx
        or      eax, edx
        pop     edx ecx
        ret     4
;-----------------------------------------------------------------------------
align 16
putimage_get16bpp:
; RRRRRGGGGGGBBBBB -> 00000000RRRRR000GGGGGG00BBBBB000
        push    ecx edx
        movzx   eax, word [esi]
        add     esi, 2
        mov     ecx, eax
        mov     edx, eax
        and     eax, 0x1F
        and     ecx, 0x3F shl 5
        and     edx, 0x1F shl 11
        shl     eax, 3
        shl     ecx, 5
        shl     edx, 8
        or      eax, ecx
        or      eax, edx
        pop     edx ecx
        ret     4
;-----------------------------------------------------------------------------
;align 4
; eax x beginning
; ebx y beginning
; ecx x end
        ; edx y end
; edi color
;__sys_drawbar:
;        mov     esi, [current_slot]
;        add     eax, [esi+APPDATA.wnd_clientbox.left]
;        add     ecx, [esi+APPDATA.wnd_clientbox.left]
;        add     ebx, [esi+APPDATA.wnd_clientbox.top]
;        add     edx, [esi+APPDATA.wnd_clientbox.top]
;--------------------------------------
;align 4
;.forced:
;        call    vesa20_drawbar
;        call    [draw_pointer]
;        ret
;-----------------------------------------------------------------------------
align 4
kb_write_wait_ack:
 
        push    ecx edx
 
        mov     dl, al
        mov     ecx, 0x1ffff; last 0xffff, new value in view of fast CPU's
.wait_output_ready:
        in      al, 0x64
        test    al, 2
        jz      @f
        loop    .wait_output_ready
        mov     ah, 1
        jmp     .nothing
@@:
        mov     al, dl
        out     0x60, al
        mov     ecx, 0xfffff; last 0xffff, new value in view of fast CPU's
.wait_ack:
        in      al, 0x64
        test    al, 1
        jnz     @f
        loop    .wait_ack
        mov     ah, 1
        jmp     .nothing
@@:
        in      al, 0x60
        xor     ah, ah
 
.nothing:
        pop     edx ecx
 
        ret
;-----------------------------------------------------------------------------
 
setmouse:  ; set mousepicture -pointer
           ; ps2 mouse enable
 
;        mov     [MOUSE_PICTURE], dword mousepointer
 
        cli
 
        ret
 
if used _rdtsc
_rdtsc:
        bt      [cpu_caps], CAPS_TSC
        jnc     ret_rdtsc
        rdtsc
        ret
   ret_rdtsc:
        mov     edx, 0xffffffff
        mov     eax, 0xffffffff
        ret
end if
 
sys_msg_board_str:
 
        pushad
   @@:
        cmp     [esi], byte 0
        je      @f
        mov     ebx, 1
        movzx   ecx, byte [esi]
        call    sys_msg_board
        inc     esi
        jmp     @b
   @@:
        popad
        ret
 
sys_msg_board_byte:
; in: al = byte to display
; out: nothing
; destroys: nothing
        pushad
        mov     ecx, 2
        shl     eax, 24
        jmp     @f
 
sys_msg_board_word:
; in: ax = word to display
; out: nothing
; destroys: nothing
        pushad
        mov     ecx, 4
        shl     eax, 16
        jmp     @f
 
sys_msg_board_dword:
; in: eax = dword to display
; out: nothing
; destroys: nothing
        pushad
        mov     ecx, 8
@@:
        push    ecx
        rol     eax, 4
        push    eax
        and     al, 0xF
        cmp     al, 10
        sbb     al, 69h
        das
        mov     cl, al
        xor     ebx, ebx
        inc     ebx
        call    sys_msg_board
        pop     eax
        pop     ecx
        loop    @b
        popad
        ret
 
msg_board_data_size = 65536 ; Must be power of two
 
uglobal
  msg_board_data  rb msg_board_data_size
  msg_board_count dd 0x0
endg
 
sys_msg_board:
 
; ebx=1 : write :  bl byte to write
; ebx=2 :  read :  ebx=0 -> no data, ebx=1 -> data in al
 
        push    eax ebx                 ; Save eax and ebx, since we're restoring their order required.
        mov     eax, ebx
        mov     ebx, ecx
 
        mov     ecx, [msg_board_count]
        cmp     eax, 1
        jne     .smbl1
 
if defined debug_com_base
 
        push    dx ax
 
       @@:                              ; Wait for empty transmit register  (yes, this slows down system..)
        mov     dx, debug_com_base+5
        in      al, dx
        test    al, 1 shl 5
        jz      @r
 
        mov     dx, debug_com_base      ; Output the byte
        mov     al, bl
        out     dx, al
 
        pop     ax dx
 
end if
 
        mov     [msg_board_data+ecx], bl
; // if debug_direct_print == 1
        cmp     byte [debug_direct_print], 1
        jnz     @f
        pusha
iglobal
msg_board_pos   dd      (42*6)*65536+10 ; for printing debug output on the screen
endg
        lea     edx, [msg_board_data+ecx]
        mov     ecx, 0x40FFFFFF
        mov     ebx, [msg_board_pos]
        mov     edi, 1
        mov     esi, 1
        call    dtext
        popa
        add     word [msg_board_pos+2], 6
        cmp     bl, 10
        jnz     @f
        mov     word [msg_board_pos+2], (42*6)
        add     word [msg_board_pos], 10
        mov     ax, word [_display.width]
        cmp     word [msg_board_pos], ax
        jb      @f
        mov     word [msg_board_pos], 10
@@:
; // end if
 
if 0
        pusha
        mov     al, bl
        mov     edx, 402h
        out     dx, al
        popa
end if
        inc     ecx
        and     ecx, msg_board_data_size - 1
        mov     [msg_board_count], ecx
 
        pop     ebx eax
        ret
.smbl1:
        cmp     eax, 2
        jne     .smbl2
        test    ecx, ecx
        jz      .smbl21
 
        add     esp, 8                  ; Returning data in ebx and eax, so no need to restore them.
        mov     eax, msg_board_data+1
        mov     ebx, msg_board_data
        movzx   edx, byte [ebx]
        call    memmove
        dec     [msg_board_count]
        mov     [esp + 32], edx ;eax
        mov     [esp + 20], dword 1
        ret
.smbl21:
        mov     [esp+32], ecx
        mov     [esp+20], ecx
.smbl2:
        pop     ebx eax
        ret
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; 66 sys function.                                                ;;
;; in eax=66,ebx in [0..5],ecx,edx                                 ;;
;; out eax                                                         ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
iglobal
align 4
f66call:
           dd sys_process_def.1   ; 1 = set keyboard mode
           dd sys_process_def.2   ; 2 = get keyboard mode
           dd sys_process_def.3   ; 3 = get keyboard ctrl, alt, shift
           dd sys_process_def.4   ; 4 = set system-wide hotkey
           dd sys_process_def.5   ; 5 = delete installed hotkey
           dd sys_process_def.6   ; 6 = disable input, work only hotkeys
           dd sys_process_def.7   ; 7 = enable input, opposition to f.66.6
endg
;-----------------------------------------------------------------------------
align 4
sys_process_def:
        dec     ebx
        cmp     ebx, 7
        jae     .not_support    ;if >=8 then or eax,-1
 
        mov     edi, [CURRENT_TASK]
        jmp     dword [f66call+ebx*4]
 
.not_support:
        or      eax, -1
        ret
;-----------------------------------------------------------------------------
align 4
.1:
        shl     edi, 8
        mov     [edi+SLOT_BASE + APPDATA.keyboard_mode], cl
 
        ret
;-----------------------------------------------------------------------------
align 4
.2:                             ; 2 = get keyboard mode
        shl     edi, 8
        movzx   eax, byte [SLOT_BASE+edi + APPDATA.keyboard_mode]
        mov     [esp+32], eax
        ret
;-----------------------------------------------------------------------------
align 4
.3:                             ;3 = get keyboard ctrl, alt, shift
        mov     eax, [kb_state]
        mov     [esp+32], eax
        ret
;-----------------------------------------------------------------------------
align 4
.4:
        mov     eax, hotkey_list
@@:
        cmp     dword [eax+8], 0
        jz      .found_free
        add     eax, 16
        cmp     eax, hotkey_list+16*256
        jb      @b
        mov     dword [esp+32], 1
        ret
.found_free:
        mov     [eax+8], edi
        mov     [eax+4], edx
        movzx   ecx, cl
        lea     ecx, [hotkey_scancodes+ecx*4]
        mov     edx, [ecx]
        mov     [eax], edx
        mov     [ecx], eax
        mov     [eax+12], ecx
        test    edx, edx
        jz      @f
        mov     [edx+12], eax
@@:
        and     dword [esp+32], 0
        ret
;-----------------------------------------------------------------------------
align 4
.5:
        movzx   ebx, cl
        lea     ebx, [hotkey_scancodes+ebx*4]
        mov     eax, [ebx]
.scan:
        test    eax, eax
        jz      .notfound
        cmp     [eax+8], edi
        jnz     .next
        cmp     [eax+4], edx
        jz      .found
.next:
        mov     eax, [eax]
        jmp     .scan
.notfound:
        mov     dword [esp+32], 1
        ret
.found:
        mov     ecx, [eax]
        jecxz   @f
        mov     edx, [eax+12]
        mov     [ecx+12], edx
@@:
        mov     ecx, [eax+12]
        mov     edx, [eax]
        mov     [ecx], edx
        xor     edx, edx
        mov     [eax+4], edx
        mov     [eax+8], edx
        mov     [eax+12], edx
        mov     [eax], edx
        mov     [esp+32], edx
        ret
;-----------------------------------------------------------------------------
align 4
.6:
        pushfd
        cli
        mov     eax, [PID_lock_input]
        test    eax, eax
        jnz     @f
; get current PID
        mov     eax, [CURRENT_TASK]
        shl     eax, 5
        mov     eax, [eax+CURRENT_TASK+TASKDATA.pid]
; set current PID for lock input
        mov     [PID_lock_input], eax
@@:
        popfd
        ret
;-----------------------------------------------------------------------------
align 4
.7:
        mov     eax, [PID_lock_input]
        test    eax, eax
        jz      @f
; get current PID
        mov     ebx, [CURRENT_TASK]
        shl     ebx, 5
        mov     ebx, [ebx+CURRENT_TASK+TASKDATA.pid]
; compare current lock input with current PID
        cmp     ebx, eax
        jne     @f
 
        xor     eax, eax
        mov     [PID_lock_input], eax
@@:
        ret
;-----------------------------------------------------------------------------
uglobal
  PID_lock_input dd 0x0
endg
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; 61 sys function.                                                ;;
;; in eax=61,ebx in [1..3]                                         ;;
;; out eax                                                         ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
iglobal
align 4
f61call:
           dd sys_gs.1   ; resolution
           dd sys_gs.2   ; bits per pixel
           dd sys_gs.3   ; bytes per scanline
endg
 
 
align 4
 
sys_gs:                         ; direct screen access
        dec     ebx
        cmp     ebx, 2
        ja      .not_support
        jmp     dword [f61call+ebx*4]
.not_support:
        or      [esp+32], dword -1
        ret
 
 
.1:                             ; resolution
        mov     eax, [_display.width]
        shl     eax, 16
        mov     ax, word [_display.height]
        mov     [esp+32], eax
        ret
.2:                             ; bits per pixel
        mov     eax, [_display.bits_per_pixel]
        mov     [esp+32], eax
        ret
.3:                             ; bytes per scanline
        mov     eax, [_display.lfb_pitch]
        mov     [esp+32], eax
        ret
 
align 4  ;  system functions
 
syscall_setpixel:                       ; SetPixel
 
        mov     eax, ebx
        mov     ebx, ecx
        mov     ecx, edx
        mov     edx, [TASK_BASE]
        add     eax, [edx-twdw+WDATA.box.left]
        add     ebx, [edx-twdw+WDATA.box.top]
        mov     edi, [current_slot]
        add     eax, [edi+APPDATA.wnd_clientbox.left]
        add     ebx, [edi+APPDATA.wnd_clientbox.top]
        xor     edi, edi ; no force
        and     ecx, 0xFBFFFFFF  ;negate 0x04000000 save to mouseunder area
;        jmp     [putpixel]
        jmp     __sys_putpixel
 
align 4
 
syscall_writetext:                      ; WriteText
 
        mov     eax, [TASK_BASE]
        mov     ebp, [eax-twdw+WDATA.box.left]
        push    esi
        mov     esi, [current_slot]
        add     ebp, [esi+APPDATA.wnd_clientbox.left]
        shl     ebp, 16
        add     ebp, [eax-twdw+WDATA.box.top]
        add     bp, word[esi+APPDATA.wnd_clientbox.top]
        pop     esi
        test    ecx, 0x08000000  ; redirect the output to the user area
        jnz     @f
        add     ebx, ebp
align 4
@@:
        mov     eax, edi
        test    ecx, 0x08000000  ; redirect the output to the user area
        jnz     dtext
        xor     edi, edi
        jmp     dtext
 
align 4
 
syscall_drawrect:                       ; DrawRect
 
        mov     edi, edx ; color + gradient
        and     edi, 0x80FFFFFF
        test    bx, bx  ; x.size
        je      .drectr
        test    cx, cx ; y.size
        je      .drectr
 
        mov     eax, ebx ; bad idea
        mov     ebx, ecx
 
        movzx   ecx, ax ; ecx - x.size
        shr     eax, 16 ; eax - x.coord
        movzx   edx, bx ; edx - y.size
        shr     ebx, 16 ; ebx - y.coord
        mov     esi, [current_slot]
 
        add     eax, [esi + APPDATA.wnd_clientbox.left]
        add     ebx, [esi + APPDATA.wnd_clientbox.top]
        add     ecx, eax
        add     edx, ebx
;        jmp     [drawbar]
        jmp     vesa20_drawbar
.drectr:
        ret
 
align 4
syscall_getscreensize:                  ; GetScreenSize
        mov     ax, word [_display.width]
        dec     ax
        shl     eax, 16
        mov     ax, word [_display.height]
        dec     ax
        mov     [esp + 32], eax
        ret
;-----------------------------------------------------------------------------
align 4
syscall_cdaudio:
; ECX - position of CD/DVD-drive
; from 0=Primary Master to 3=Secondary Slave for first IDE contr.
; from 4=Primary Master to 7=Secondary Slave for second IDE contr.
; from 8=Primary Master to 11=Secondary Slave for third IDE contr.
        cmp     ecx, 11
        ja      .exit
 
        mov     eax, ecx
        shr     eax, 2
        lea     eax, [eax*5]
        mov     al, [eax+DRIVE_DATA+1]
 
        push    ecx ebx
        mov     ebx, ecx
        and     ebx, 11b
        shl     ebx, 1
        mov     cl, 6
        sub     cl, bl
        shr     al, cl
        test    al, 2 ; it's not an ATAPI device
        pop     ebx ecx
 
        jz      .exit
 
        cmp     ebx, 4
        je      .eject
 
        cmp     ebx, 5
        je      .load
;--------------------------------------
.exit:
        ret
;--------------------------------------
.load:
        call    .reserve
        call    LoadMedium
        jmp     .free
;--------------------------------------
.eject:
        call    .reserve
        call    clear_CD_cache
        call    allow_medium_removal
        call    EjectMedium
        jmp     .free
;--------------------------------------
.reserve:
        call    reserve_cd
 
        mov     ebx, ecx
        inc     ebx
        mov     [cdpos], ebx
 
        mov     eax, ecx
        shr     eax, 1
        and     eax, 1
        inc     eax
        mov     [ChannelNumber], ax
        mov     eax, ecx
        and     eax, 1
        mov     [DiskNumber], al
        call    reserve_cd_channel
        ret
;--------------------------------------
.free:
        call    free_cd_channel
        and     [cd_status], 0
        ret
;-----------------------------------------------------------------------------
align 4
syscall_getpixel_WinMap:                       ; GetPixel WinMap
        cmp     ebx, [_display.width]
        jb      @f
        cmp     ecx, [_display.height]
        jb      @f
        xor     eax, eax
        jmp     .store
;--------------------------------------
align 4
@@:
        mov     eax, [d_width_calc_area + ecx*4]
        add     eax, [_display.win_map]
        movzx   eax, byte[eax+ebx]        ; get value for current point
;--------------------------------------
align 4
.store:
        mov     [esp + 32], eax
        ret
;-----------------------------------------------------------------------------
align 4
syscall_getpixel:                       ; GetPixel
        mov     ecx, [_display.width]
        xor     edx, edx
        mov     eax, ebx
        div     ecx
        mov     ebx, edx
        xchg    eax, ebx
        and     ecx, 0xFBFFFFFF  ;negate 0x04000000 use mouseunder area
        call    dword [GETPIXEL]; eax - x, ebx - y
        mov     [esp + 32], ecx
        ret
;-----------------------------------------------------------------------------
align 4
syscall_getarea:
;eax = 36
;ebx = pointer to bufer for img BBGGRRBBGGRR...
;ecx = [size x]*65536 + [size y]
;edx = [start x]*65536 + [start y]
        pushad
        mov     edi, ebx
        mov     eax, edx
        shr     eax, 16
        mov     ebx, edx
        and     ebx, 0xffff
        dec     eax
        dec     ebx
     ; eax - x, ebx - y
        mov     edx, ecx
 
        shr     ecx, 16
        and     edx, 0xffff
        mov     esi, ecx
     ; ecx - size x, edx - size y
 
        mov     ebp, edx
        dec     ebp
        lea     ebp, [ebp*3]
 
        imul    ebp, esi
 
        mov     esi, ecx
        dec     esi
        lea     esi, [esi*3]
 
        add     ebp, esi
        add     ebp, edi
 
        add     ebx, edx
;--------------------------------------
align 4
.start_y:
        push    ecx edx
;--------------------------------------
align 4
.start_x:
        push    eax ebx ecx
        add     eax, ecx
 
        and     ecx, 0xFBFFFFFF  ;negate 0x04000000 use mouseunder area
        call    dword [GETPIXEL]; eax - x, ebx - y
 
        mov     [ebp], cx
        shr     ecx, 16
        mov     [ebp+2], cl
 
        pop     ecx ebx eax
        sub     ebp, 3
        dec     ecx
        jnz     .start_x
        pop     edx ecx
        dec     ebx
        dec     edx
        jnz     .start_y
        popad
        ret
;-----------------------------------------------------------------------------
align 4
syscall_putarea_backgr:
;eax = 25
;ebx = pointer to bufer for img BBGGRRBBGGRR...
;ecx = [size x]*65536 + [size y]
;edx = [start x]*65536 + [start y]
        pushad
        mov     edi, ebx
        mov     eax, edx
        shr     eax, 16
        mov     ebx, edx
        and     ebx, 0xffff
        dec     eax
        dec     ebx
; eax - x, ebx - y
        mov     edx, ecx
        shr     ecx, 16
        and     edx, 0xffff
        mov     esi, ecx
; ecx - size x, edx - size y
        mov     ebp, edx
        dec     ebp
        shl     ebp, 2
 
        imul    ebp, esi
 
        mov     esi, ecx
        dec     esi
        shl     esi, 2
 
        add     ebp, esi
        add     ebp, edi
 
        add     ebx, edx
;--------------------------------------
align 4
.start_y:
        push    ecx edx
;--------------------------------------
align 4
.start_x:
        push    eax ecx
        add     eax, ecx
 
        mov     ecx, [ebp]
        rol     ecx, 8
        test    cl, cl        ; transparensy = 0
        jz      .no_put
 
        xor     cl, cl
        ror     ecx, 8
 
        pushad
        mov     edx, [d_width_calc_area + ebx*4]
        add     edx, [_display.win_map]
        movzx   edx, byte [eax+edx]
        cmp     dl, byte 1
        jne     @f
 
        call    dword [PUTPIXEL]; eax - x, ebx - y
;--------------------------------------
align 4
@@:
        popad
;--------------------------------------
align 4
.no_put:
        pop     ecx eax
 
        sub     ebp, 4
        dec     ecx
        jnz     .start_x
 
        pop     edx ecx
        dec     ebx
        dec     edx
        jnz     .start_y
 
        popad
        ret
;-----------------------------------------------------------------------------
align 4
syscall_drawline:                       ; DrawLine
 
        mov     edi, [TASK_BASE]
        movzx   eax, word[edi-twdw+WDATA.box.left]
        mov     ebp, eax
        mov     esi, [current_slot]
        add     ebp, [esi+APPDATA.wnd_clientbox.left]
        add     ax, word[esi+APPDATA.wnd_clientbox.left]
        add     ebp, ebx
        shl     eax, 16
        movzx   ebx, word[edi-twdw+WDATA.box.top]
        add     eax, ebp
        mov     ebp, ebx
        add     ebp, [esi+APPDATA.wnd_clientbox.top]
        add     bx, word[esi+APPDATA.wnd_clientbox.top]
        add     ebp, ecx
        shl     ebx, 16
        xor     edi, edi
        add     ebx, ebp
        mov     ecx, edx
;        jmp     [draw_line]
        jmp     __sys_draw_line
 
 
align 4
syscall_reserveportarea:                ; ReservePortArea and FreePortArea
 
        call    r_f_port_area
        mov     [esp+32], eax
        ret
 
align 4
syscall_threads:                        ; CreateThreads
;
;   ecx=thread entry point
;   edx=thread stack pointer
;
; on return : eax = pid
 
        xor     ebx, ebx
        call    new_sys_threads
 
        mov     [esp+32], eax
        ret
 
align 4
 
paleholder:
        ret
;------------------------------------------------------------------------------
align 4
calculate_fast_getting_offset_for_WinMapAddress:
; calculate data area for fast getting offset to _WinMapAddress
        xor     eax, eax
        mov     ecx, [_display.height]
        mov     edi, d_width_calc_area
        cld
@@:
        stosd
        add     eax, [_display.width]
        dec     ecx
        jnz     @r
        ret
;------------------------------------------------------------------------------
align 4
calculate_fast_getting_offset_for_LFB:
; calculate data area for fast getting offset to LFB
        xor     eax, eax
        mov     ecx, [_display.height]
        mov     edi, BPSLine_calc_area
        cld
@@:
        stosd
        add     eax, [_display.lfb_pitch]
        dec     ecx
        jnz     @r
        ret
;------------------------------------------------------------------------------
align 4
set_screen:
; in:
; eax - new Screen_Max_X
; ecx - new BytesPerScanLine
; edx - new Screen_Max_Y
 
        pushfd
        cli
 
        mov     [_display.lfb_pitch], ecx
 
        mov     [screen_workarea.right], eax
        mov     [screen_workarea.bottom], edx
 
        push    ebx
        push    esi
        push    edi
 
        pushad
 
        cmp     [do_not_touch_winmap], 1
        je      @f
 
        stdcall kernel_free, [_display.win_map]
 
        mov     eax, [_display.width]
        mul     [_display.height]
        mov     [_display.win_map_size], eax
 
        stdcall kernel_alloc, eax
        mov     [_display.win_map], eax
        test    eax, eax
        jz      .epic_fail
; store for f.18.24
        mov     eax, [_display.width]
        mov     [display_width_standard], eax
 
        mov     eax, [_display.height]
        mov     [display_height_standard], eax
@@:
        call    calculate_fast_getting_offset_for_WinMapAddress
; for Qemu or non standart video cards
; Unfortunately [BytesPerScanLine] does not always
;                             equal to [_display.width] * [ScreenBPP] / 8
        call    calculate_fast_getting_offset_for_LFB
        popad
 
        call    repos_windows
        xor     eax, eax
        xor     ebx, ebx
        mov     ecx, [_display.width]
        mov     edx, [_display.height]
        dec     ecx
        dec     edx
        call    calculatescreen
        pop     edi
        pop     esi
        pop     ebx
 
        popfd
        ret
 
.epic_fail:
        hlt                     ; Houston, we've had a problem
 
; --------------- APM ---------------------
uglobal
apm_entry       dp      0
apm_vf          dd      0
endg
 
align 4
sys_apm:
        xor     eax, eax
        cmp     word [apm_vf], ax       ; Check APM BIOS enable
        jne     @f
        inc     eax
        or      dword [esp + 44], eax   ; error
        add     eax, 7
        mov     dword [esp + 32], eax   ; 32-bit protected-mode interface not supported
        ret
 
@@:
;       xchg    eax, ecx
;       xchg    ebx, ecx
 
        cmp     dx, 3
        ja      @f
        and     [esp + 44], byte 0xfe    ; emulate func 0..3 as func 0
        mov     eax, [apm_vf]
        mov     [esp + 32], eax
        shr     eax, 16
        mov     [esp + 28], eax
        ret
 
@@:
 
        mov     esi, [master_tab+(OS_BASE shr 20)]
        xchg    [master_tab], esi
        push    esi
        mov     edi, cr3
        mov     cr3, edi                ;flush TLB
 
        call    pword [apm_entry]       ;call APM BIOS
 
        xchg    eax, [esp]
        mov     [master_tab], eax
        mov     eax, cr3
        mov     cr3, eax
        pop     eax
 
        mov     [esp + 4 ], edi
        mov     [esp + 8], esi
        mov     [esp + 20], ebx
        mov     [esp + 24], edx
        mov     [esp + 28], ecx
        mov     [esp + 32], eax
        setc    al
        and     [esp + 44], byte 0xfe
        or      [esp + 44], al
        ret
; -----------------------------------------
 
align 4
 
undefined_syscall:                      ; Undefined system call
        mov     [esp + 32], dword -1
        ret
 
 
if ~ lang eq sp
diff16 "end of .text segment",0,$
end if
 
include "data32.inc"
 
__REV__ = __REV
 
if ~ lang eq sp
diff16 "end of kernel code",0,$
end if

Rev 6261	Rev 6311
1	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	1	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
2	;;	2	;;
3	;; Copyright (C) KolibriOS team 2004-2016. All rights reserved.	3	;; Copyright (C) KolibriOS team 2004-2016. All rights reserved.
4	;; PROGRAMMING:	4	;; PROGRAMMING:
5	;; Ivan Poddubny	5	;; Ivan Poddubny
6	;; Marat Zakiyanov (Mario79)	6	;; Marat Zakiyanov (Mario79)
7	;; VaStaNi	7	;; VaStaNi
8	;; Trans	8	;; Trans
9	;; Mihail Semenyako (mike.dld)	9	;; Mihail Semenyako (mike.dld)
10	;; Sergey Kuzmin (Wildwest)	10	;; Sergey Kuzmin (Wildwest)
11	;; Andrey Halyavin (halyavin)	11	;; Andrey Halyavin (halyavin)
12	;; Mihail Lisovin (Mihasik)	12	;; Mihail Lisovin (Mihasik)
13	;; Andrey Ignatiev (andrew_programmer)	13	;; Andrey Ignatiev (andrew_programmer)
14	;; NoName	14	;; NoName
15	;; Evgeny Grechnikov (Diamond)	15	;; Evgeny Grechnikov (Diamond)
16	;; Iliya Mihailov (Ghost)	16	;; Iliya Mihailov (Ghost)
17	;; Sergey Semyonov (Serge)	17	;; Sergey Semyonov (Serge)
18	;; Johnny_B	18	;; Johnny_B
19	;; SPraid (simba)	19	;; SPraid (simba)
20	;; Hidnplayr	20	;; Hidnplayr
21	;; Alexey Teplov ()	21	;; Alexey Teplov ()
22	;; Rus	22	;; Rus
23	;; Nable	23	;; Nable
24	;; shurf	24	;; shurf
25	;; Alver	25	;; Alver
26	;; Maxis	26	;; Maxis
27	;; Galkov	27	;; Galkov
28	;; CleverMouse	28	;; CleverMouse
29	;; tsdima	29	;; tsdima
30	;; turbanoff	30	;; turbanoff
31	;; Asper	31	;; Asper
32	;; art_zh	32	;; art_zh
33	;;	33	;;
34	;; Data in this file was originally part of MenuetOS project which is	34	;; Data in this file was originally part of MenuetOS project which is
35	;; distributed under the terms of GNU GPL. It is modified and redistributed as	35	;; distributed under the terms of GNU GPL. It is modified and redistributed as
36	;; part of KolibriOS project under the terms of GNU GPL.	36	;; part of KolibriOS project under the terms of GNU GPL.
37	;;	37	;;
38	;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa	38	;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa
39	;; PROGRAMMING:	39	;; PROGRAMMING:
40	;;	40	;;
41	;; Ville Mikael Turjanmaa, villemt@itu.jyu.fi	41	;; Ville Mikael Turjanmaa, villemt@itu.jyu.fi
42	;; - main os coding/design	42	;; - main os coding/design
43	;; Jan-Michael Brummer, BUZZ2@gmx.de	43	;; Jan-Michael Brummer, BUZZ2@gmx.de
44	;; Felix Kaiser, info@felix-kaiser.de	44	;; Felix Kaiser, info@felix-kaiser.de
45	;; Paolo Minazzi, paolo.minazzi@inwind.it	45	;; Paolo Minazzi, paolo.minazzi@inwind.it
46	;; quickcode@mail.ru	46	;; quickcode@mail.ru
47	;; Alexey, kgaz@crosswinds.net	47	;; Alexey, kgaz@crosswinds.net
48	;; Juan M. Caravaca, bitrider@wanadoo.es	48	;; Juan M. Caravaca, bitrider@wanadoo.es
49	;; kristol@nic.fi	49	;; kristol@nic.fi
50	;; Mike Hibbett, mikeh@oceanfree.net	50	;; Mike Hibbett, mikeh@oceanfree.net
51	;; Lasse Kuusijarvi, kuusijar@lut.fi	51	;; Lasse Kuusijarvi, kuusijar@lut.fi
52	;; Jarek Pelczar, jarekp3@wp.pl	52	;; Jarek Pelczar, jarekp3@wp.pl
53	;;	53	;;
54	;; KolibriOS is distributed in the hope that it will be useful, but WITHOUT ANY	54	;; KolibriOS is distributed in the hope that it will be useful, but WITHOUT ANY
55	;; WARRANTY. No author or distributor accepts responsibility to anyone for the	55	;; WARRANTY. No author or distributor accepts responsibility to anyone for the
56	;; consequences of using it or for whether it serves any particular purpose or	56	;; consequences of using it or for whether it serves any particular purpose or
57	;; works at all, unless he says so in writing. Refer to the GNU General Public	57	;; works at all, unless he says so in writing. Refer to the GNU General Public
58	;; License (the "GPL") for full details.	58	;; License (the "GPL") for full details.
59	;	59	;
60	;; Everyone is granted permission to copy, modify and redistribute KolibriOS,	60	;; Everyone is granted permission to copy, modify and redistribute KolibriOS,
61	;; but only under the conditions described in the GPL. A copy of this license	61	;; but only under the conditions described in the GPL. A copy of this license
62	;; is supposed to have been given to you along with KolibriOS so you can know	62	;; is supposed to have been given to you along with KolibriOS so you can know
63	;; your rights and responsibilities. It should be in a file named COPYING.	63	;; your rights and responsibilities. It should be in a file named COPYING.
64	;; Among other things, the copyright notice and this notice must be preserved	64	;; Among other things, the copyright notice and this notice must be preserved
65	;; on all copies.	65	;; on all copies.
66	;;	66	;;
67	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	67	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
68		68
69	format binary as "mnt"	69	format binary as "mnt"
70		70
71	include 'macros.inc'	71	include 'macros.inc'
72	include 'struct.inc'	72	include 'struct.inc'
73		73
74	$Revision: 6261 $	74	$Revision: 6311 $
75		75
76		76
77	USE_COM_IRQ equ 1 ; make irq 3 and irq 4 available for PCI devices	77	USE_COM_IRQ equ 1 ; make irq 3 and irq 4 available for PCI devices
78	VESA_1_2_VIDEO equ 0 ; enable vesa 1.2 bank switch functions	78	VESA_1_2_VIDEO equ 0 ; enable vesa 1.2 bank switch functions
79		79
80	; Enabling the next line will enable serial output console	80	; Enabling the next line will enable serial output console
81	;debug_com_base equ 0x3f8 ; 0x3f8 is com1, 0x2f8 is com2, 0x3e8 is com3, 0x2e8 is com4, no irq's are used	81	;debug_com_base equ 0x3f8 ; 0x3f8 is com1, 0x2f8 is com2, 0x3e8 is com3, 0x2e8 is com4, no irq's are used
82		82
83	include "proc32.inc"	83	include "proc32.inc"
84	include "kglobals.inc"	84	include "kglobals.inc"
85	include "lang.inc"	85	include "lang.inc"
86	include "encoding.inc"	86	include "encoding.inc"
87		87
88	include "const.inc"	88	include "const.inc"
89		89
90	iglobal	90	iglobal
91	; The following variable, if equal to 1, duplicates debug output to the screen.	91	; The following variable, if equal to 1, duplicates debug output to the screen.
92	debug_direct_print db 0	92	debug_direct_print db 0
93	; Start the first app (LAUNCHER) after kernel is loaded? (1=yes, 2 or 0=no)	93	; Start the first app (LAUNCHER) after kernel is loaded? (1=yes, 2 or 0=no)
94	launcher_start db 1	94	launcher_start db 1
95	endg	95	endg
96		96
97	max_processes equ 255	97	max_processes equ 255
98	tss_step equ (128+8192) ; tss & i/o - 65535 ports, * 256=557056*4	98	tss_step equ (128+8192) ; tss & i/o - 65535 ports, * 256=557056*4
99		99
100	os_stack equ (os_data_l-gdts) ; GDTs	100	os_stack equ (os_data_l-gdts) ; GDTs
101	os_code equ (os_code_l-gdts)	101	os_code equ (os_code_l-gdts)
102	graph_data equ (3+graph_data_l-gdts)	102	graph_data equ (3+graph_data_l-gdts)
103	tss0 equ (tss0_l-gdts)	103	tss0 equ (tss0_l-gdts)
104	app_code equ (3+app_code_l-gdts)	104	app_code equ (3+app_code_l-gdts)
105	app_data equ (3+app_data_l-gdts)	105	app_data equ (3+app_data_l-gdts)
106	app_tls equ (3+tls_data_l-gdts)	106	app_tls equ (3+tls_data_l-gdts)
107	pci_code_sel equ (pci_code_32-gdts)	107	pci_code_sel equ (pci_code_32-gdts)
108	pci_data_sel equ (pci_data_32-gdts)	108	pci_data_sel equ (pci_data_32-gdts)
109		109
110		110
111	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	111	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
112	;;	112	;;
113	;; Included files:	113	;; Included files:
114	;;	114	;;
115	;; Kernel16.inc	115	;; Kernel16.inc
116	;; - Booteng.inc English text for bootup	116	;; - Booteng.inc English text for bootup
117	;; - Bootcode.inc Hardware setup	117	;; - Bootcode.inc Hardware setup
118	;; - Pci16.inc PCI functions	118	;; - Pci16.inc PCI functions
119	;;	119	;;
120	;; Kernel32.inc	120	;; Kernel32.inc
121	;; - Sys32.inc Process management	121	;; - Sys32.inc Process management
122	;; - Shutdown.inc Shutdown and restart	122	;; - Shutdown.inc Shutdown and restart
123	;; - Fat32.inc Read / write hd	123	;; - Fat32.inc Read / write hd
124	;; - Vesa12.inc Vesa 1.2 driver	124	;; - Vesa12.inc Vesa 1.2 driver
125	;; - Vesa20.inc Vesa 2.0 driver	125	;; - Vesa20.inc Vesa 2.0 driver
126	;; - Vga.inc VGA driver	126	;; - Vga.inc VGA driver
127	;; - Stack.inc Network interface	127	;; - Stack.inc Network interface
128	;; - Mouse.inc Mouse pointer	128	;; - Mouse.inc Mouse pointer
129	;; - Scincode.inc Window skinning	129	;; - Scincode.inc Window skinning
130	;; - Pci32.inc PCI functions	130	;; - Pci32.inc PCI functions
131	;;	131	;;
132	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	132	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
133		133
134		134
135	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	135	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
136	;; ;;	136	;; ;;
137	;; 16 BIT ENTRY FROM BOOTSECTOR ;;	137	;; 16 BIT ENTRY FROM BOOTSECTOR ;;
138	;; ;;	138	;; ;;
139	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	139	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
140		140
141	use16	141	use16
142	org 0x0	142	org 0x0
143	jmp start_of_code	143	jmp start_of_code
144		144
145	if lang eq sp	145	if lang eq sp
146	include "kernelsp.inc" ; spanish kernel messages	146	include "kernelsp.inc" ; spanish kernel messages
147	else if lang eq et	147	else if lang eq et
148	version db 'Kolibri OS versioon 0.7.7.0+ ',13,10,13,10,0	148	version db 'Kolibri OS versioon 0.7.7.0+ ',13,10,13,10,0
149	else	149	else
150	version db 'Kolibri OS version 0.7.7.0+ ',13,10,13,10,0	150	version db 'Kolibri OS version 0.7.7.0+ ',13,10,13,10,0
151	end if	151	end if
152		152
153	include "boot/bootstr.inc" ; language-independent boot messages	153	include "boot/bootstr.inc" ; language-independent boot messages
154	include "boot/preboot.inc"	154	include "boot/preboot.inc"
155		155
156	if lang eq ge	156	if lang eq ge
157	include "boot/bootge.inc" ; german system boot messages	157	include "boot/bootge.inc" ; german system boot messages
158	else if lang eq sp	158	else if lang eq sp
159	include "boot/bootsp.inc" ; spanish system boot messages	159	include "boot/bootsp.inc" ; spanish system boot messages
160	else if lang eq ru	160	else if lang eq ru
161	include "boot/bootru.inc" ; russian system boot messages	161	include "boot/bootru.inc" ; russian system boot messages
162	include "boot/ru.inc" ; Russian font	162	include "boot/ru.inc" ; Russian font
163	else if lang eq et	163	else if lang eq et
164	include "boot/bootet.inc" ; estonian system boot messages	164	include "boot/bootet.inc" ; estonian system boot messages
165	include "boot/et.inc" ; Estonian font	165	include "boot/et.inc" ; Estonian font
166	else	166	else
167	include "boot/booten.inc" ; english system boot messages	167	include "boot/booten.inc" ; english system boot messages
168	end if	168	end if
169		169
170	include "boot/bootcode.inc" ; 16 bit system boot code	170	include "boot/bootcode.inc" ; 16 bit system boot code
171	include "bus/pci/pci16.inc"	171	include "bus/pci/pci16.inc"
172	include "detect/biosdisk.inc"	172	include "detect/biosdisk.inc"
173		173
174	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	174	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
175	;; ;;	175	;; ;;
176	;; SWITCH TO 32 BIT PROTECTED MODE ;;	176	;; SWITCH TO 32 BIT PROTECTED MODE ;;
177	;; ;;	177	;; ;;
178	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	178	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
179		179
180		180
181	; CR0 Flags - Protected mode and Paging	181	; CR0 Flags - Protected mode and Paging
182		182
183	mov ecx, CR0_PE	183	mov ecx, CR0_PE
184		184
185	; Enabling 32 bit protected mode	185	; Enabling 32 bit protected mode
186		186
187	sidt [cs:old_ints_h]	187	sidt [cs:old_ints_h]
188		188
189	cli ; disable all irqs	189	cli ; disable all irqs
190	cld	190	cld
191	mov al, 255 ; mask all irqs	191	mov al, 255 ; mask all irqs
192	out 0xa1, al	192	out 0xa1, al
193	out 0x21, al	193	out 0x21, al
194	l.5:	194	l.5:
195	in al, 0x64 ; Enable A20	195	in al, 0x64 ; Enable A20
196	test al, 2	196	test al, 2
197	jnz l.5	197	jnz l.5
198	mov al, 0xD1	198	mov al, 0xD1
199	out 0x64, al	199	out 0x64, al
200	l.6:	200	l.6:
201	in al, 0x64	201	in al, 0x64
202	test al, 2	202	test al, 2
203	jnz l.6	203	jnz l.6
204	mov al, 0xDF	204	mov al, 0xDF
205	out 0x60, al	205	out 0x60, al
206	l.7:	206	l.7:
207	in al, 0x64	207	in al, 0x64
208	test al, 2	208	test al, 2
209	jnz l.7	209	jnz l.7
210	mov al, 0xFF	210	mov al, 0xFF
211	out 0x64, al	211	out 0x64, al
212		212
213	lgdt [cs:tmp_gdt] ; Load GDT	213	lgdt [cs:tmp_gdt] ; Load GDT
214	mov eax, cr0 ; protected mode	214	mov eax, cr0 ; protected mode
215	or eax, ecx	215	or eax, ecx
216	and eax, 10011111b 65536256 + 0xffffff ; caching enabled	216	and eax, 10011111b 65536256 + 0xffffff ; caching enabled
217	mov cr0, eax	217	mov cr0, eax
218	jmp pword os_code:B32 ; jmp to enable 32 bit mode	218	jmp pword os_code:B32 ; jmp to enable 32 bit mode
219		219
220	align 8	220	align 8
221	tmp_gdt:	221	tmp_gdt:
222		222
223	dw 23	223	dw 23
224	dd tmp_gdt+0x10000	224	dd tmp_gdt+0x10000
225	dw 0	225	dw 0
226		226
227	dw 0xffff	227	dw 0xffff
228	dw 0x0000	228	dw 0x0000
229	db 0x00	229	db 0x00
230	dw 11011111b *256 +10011010b	230	dw 11011111b *256 +10011010b
231	db 0x00	231	db 0x00
232		232
233	dw 0xffff	233	dw 0xffff
234	dw 0x0000	234	dw 0x0000
235	db 0x00	235	db 0x00
236	dw 11011111b *256 +10010010b	236	dw 11011111b *256 +10010010b
237	db 0x00	237	db 0x00
238		238
239	include "data16.inc"	239	include "data16.inc"
240		240
241	if ~ lang eq sp	241	if ~ lang eq sp
242	diff16 "end of bootcode",0,$+0x10000	242	diff16 "end of bootcode",0,$+0x10000
243	end if	243	end if
244		244
245	use32	245	use32
246	org $+0x10000	246	org $+0x10000
247		247
248	align 4	248	align 4
249	B32:	249	B32:
250	mov ax, os_stack ; Selector for os	250	mov ax, os_stack ; Selector for os
251	mov ds, ax	251	mov ds, ax
252	mov es, ax	252	mov es, ax
253	mov fs, ax	253	mov fs, ax
254	mov gs, ax	254	mov gs, ax
255	mov ss, ax	255	mov ss, ax
256	mov esp, TMP_STACK_TOP ; Set stack	256	mov esp, TMP_STACK_TOP ; Set stack
257		257
258	; CLEAR 0x280000 - HEAP_BASE	258	; CLEAR 0x280000 - HEAP_BASE
259		259
260	xor eax, eax	260	xor eax, eax
261	mov edi, CLEAN_ZONE	261	mov edi, CLEAN_ZONE
262	mov ecx, (HEAP_BASE-OS_BASE-CLEAN_ZONE) / 4	262	mov ecx, (HEAP_BASE-OS_BASE-CLEAN_ZONE) / 4
263	cld	263	cld
264	rep stosd	264	rep stosd
265		265
266	; CLEAR KERNEL UNDEFINED GLOBALS	266	; CLEAR KERNEL UNDEFINED GLOBALS
267	mov edi, endofcode-OS_BASE	267	mov edi, endofcode-OS_BASE
268	mov ecx, 0x90000	268	mov ecx, 0x90000
269	sub ecx, edi	269	sub ecx, edi
270	shr ecx, 2	270	shr ecx, 2
271	rep stosd	271	rep stosd
272		272
273	; SAVE & CLEAR 0-0xffff	273	; SAVE & CLEAR 0-0xffff
274		274
275	mov edi, 0x1000	275	mov edi, 0x1000
276	mov ecx, 0x8000 / 4	276	mov ecx, 0x8000 / 4
277	rep stosd	277	rep stosd
278	mov edi, 0xa000	278	mov edi, 0xa000
279	mov ecx, 0x6000 / 4	279	mov ecx, 0x6000 / 4
280	rep stosd	280	rep stosd
281		281
282	call test_cpu	282	call test_cpu
283	bts [cpu_caps-OS_BASE], CAPS_TSC ;force use rdtsc	283	bts [cpu_caps-OS_BASE], CAPS_TSC ;force use rdtsc
284		284
285	call check_acpi	285	call check_acpi
286	call init_hpet	286	call init_hpet
287	call init_BIOS32	287	call init_BIOS32
288	; MEMORY MODEL	288	; MEMORY MODEL
289	call mem_test	289	call mem_test
290	call init_mem	290	call init_mem
291	call init_page_map	291	call init_page_map
292		292
293	; ENABLE PAGING	293	; ENABLE PAGING
294		294
295	mov eax, sys_proc-OS_BASE+PROC.pdt_0	295	mov eax, sys_proc-OS_BASE+PROC.pdt_0
296	mov cr3, eax	296	mov cr3, eax
297		297
298	mov eax, cr0	298	mov eax, cr0
299	or eax, CR0_PG+CR0_WP	299	or eax, CR0_PG+CR0_WP
300	mov cr0, eax	300	mov cr0, eax
301		301
302	lgdt [gdts]	302	lgdt [gdts]
303	jmp pword os_code:high_code	303	jmp pword os_code:high_code
304		304
305	align 4	305	align 4
306	bios32_entry dd ?	306	bios32_entry dd ?
307	tmp_page_tabs dd ?	307	tmp_page_tabs dd ?
308	use16	308	use16
309	ap_init16:	309	ap_init16:
310	cli	310	cli
311	lgdt [cs:gdts_ap-ap_init16]	311	lgdt [cs:gdts_ap-ap_init16]
312	mov eax, [cs:cr3_ap-ap_init16]	312	mov eax, [cs:cr3_ap-ap_init16]
313	mov cr3, eax	313	mov cr3, eax
314	mov eax, [cs:cr4_ap-ap_init16]	314	mov eax, [cs:cr4_ap-ap_init16]
315	mov cr4, eax	315	mov cr4, eax
316	mov eax, CR0_PE+CR0_PG+CR0_WP	316	mov eax, CR0_PE+CR0_PG+CR0_WP
317	mov cr0, eax	317	mov cr0, eax
318	jmp pword os_code:ap_init_high	318	jmp pword os_code:ap_init_high
319	align 16	319	align 16
320	gdts_ap:	320	gdts_ap:
321	dw gdte-gdts-1	321	dw gdte-gdts-1
322	dd gdts	322	dd gdts
323	dw 0	323	dw 0
324	cr3_ap dd ?	324	cr3_ap dd ?
325	cr4_ap dd ?	325	cr4_ap dd ?
326	ap_init16_size = $ - ap_init16	326	ap_init16_size = $ - ap_init16
327	use32	327	use32
328		328
329	__DEBUG__ fix 1	329	__DEBUG__ fix 1
330	__DEBUG_LEVEL__ fix 1	330	__DEBUG_LEVEL__ fix 1
331	include 'init.inc'	331	include 'init.inc'
332		332
333	org OS_BASE+$	333	org OS_BASE+$
334		334
335	include 'fdo.inc'	335	include 'fdo.inc'
336		336
337	align 4	337	align 4
338	high_code:	338	high_code:
339	mov ax, os_stack	339	mov ax, os_stack
340	mov bx, app_data	340	mov bx, app_data
341	mov cx, app_tls	341	mov cx, app_tls
342	mov ss, ax	342	mov ss, ax
343	add esp, OS_BASE	343	add esp, OS_BASE
344		344
345	mov ds, bx	345	mov ds, bx
346	mov es, bx	346	mov es, bx
347	mov fs, cx	347	mov fs, cx
348	mov gs, bx	348	mov gs, bx
349		349
350	xor eax, eax	350	xor eax, eax
351	mov ebx, 0xFFFFF000+PG_SHARED+PG_NOCACHE+PG_UWR	351	mov ebx, 0xFFFFF000+PG_SHARED+PG_NOCACHE+PG_UWR
352	bt [cpu_caps], CAPS_PAT	352	bt [cpu_caps], CAPS_PAT
353	setc al	353	setc al
354	shl eax, 7	354	shl eax, 7
355	or ebx, eax	355	or ebx, eax
356		356
357	mov eax, PG_GLOBAL	357	mov eax, PG_GLOBAL
358	bt [cpu_caps], CAPS_PGE	358	bt [cpu_caps], CAPS_PGE
359	jnc @F	359	jnc @F
360		360
361	or [sys_proc+PROC.pdt_0+(OS_BASE shr 20)], eax	361	or [sys_proc+PROC.pdt_0+(OS_BASE shr 20)], eax
362	or ebx, eax	362	or ebx, eax
363		363
364	mov eax, cr4	364	mov eax, cr4
365	or eax, CR4_PGE	365	or eax, CR4_PGE
366	mov cr4, eax	366	mov cr4, eax
367	@@:	367	@@:
368	mov [pte_valid_mask], ebx	368	mov [pte_valid_mask], ebx
369		369
370	xor eax, eax	370	xor eax, eax
371	mov dword [sys_proc+PROC.pdt_0], eax	371	mov dword [sys_proc+PROC.pdt_0], eax
372	mov dword [sys_proc+PROC.pdt_0+4], eax	372	mov dword [sys_proc+PROC.pdt_0+4], eax
373		373
374	mov eax, cr3	374	mov eax, cr3
375	mov cr3, eax ; flush TLB	375	mov cr3, eax ; flush TLB
376		376
377	mov ecx, pg_data.mutex	377	mov ecx, pg_data.mutex
378	call mutex_init	378	call mutex_init
379		379
380	mov ecx, disk_list_mutex	380	mov ecx, disk_list_mutex
381	call mutex_init	381	call mutex_init
382		382
383	mov ecx, keyboard_list_mutex	383	mov ecx, keyboard_list_mutex
384	call mutex_init	384	call mutex_init
385		385
386	mov ecx, unpack_mutex	386	mov ecx, unpack_mutex
387	call mutex_init	387	call mutex_init
388		388
389	mov ecx, application_table_mutex	389	mov ecx, application_table_mutex
390	call mutex_init	390	call mutex_init
391		391
392	mov ecx, ide_mutex	392	mov ecx, ide_mutex
393	call mutex_init	393	call mutex_init
394	mov ecx, ide_channel1_mutex	394	mov ecx, ide_channel1_mutex
395	call mutex_init	395	call mutex_init
396	mov ecx, ide_channel2_mutex	396	mov ecx, ide_channel2_mutex
397	call mutex_init	397	call mutex_init
398	mov ecx, ide_channel3_mutex	398	mov ecx, ide_channel3_mutex
399	call mutex_init	399	call mutex_init
400	mov ecx, ide_channel4_mutex	400	mov ecx, ide_channel4_mutex
401	call mutex_init	401	call mutex_init
402	mov ecx, ide_channel5_mutex	402	mov ecx, ide_channel5_mutex
403	call mutex_init	403	call mutex_init
404	mov ecx, ide_channel6_mutex	404	mov ecx, ide_channel6_mutex
405	call mutex_init	405	call mutex_init
406	;-----------------------------------------------------------------------------	406	;-----------------------------------------------------------------------------
407	; SAVE REAL MODE VARIABLES	407	; SAVE REAL MODE VARIABLES
408	;-----------------------------------------------------------------------------	408	;-----------------------------------------------------------------------------
409	; --------------- APM ---------------------	409	; --------------- APM ---------------------
410		410
411	; init selectors	411	; init selectors
412	mov ebx, [BOOT_VARS+BOOT_APM_ENTRY] ; offset of APM entry point	412	mov ebx, [BOOT_VARS+BOOT_APM_ENTRY] ; offset of APM entry point
413	movzx eax, word [BOOT_VARS+BOOT_APM_CODE_32] ; real-mode segment base address of	413	movzx eax, word [BOOT_VARS+BOOT_APM_CODE_32] ; real-mode segment base address of
414	; protected-mode 32-bit code segment	414	; protected-mode 32-bit code segment
415	movzx ecx, word [BOOT_VARS+BOOT_APM_CODE_16]; real-mode segment base address of	415	movzx ecx, word [BOOT_VARS+BOOT_APM_CODE_16]; real-mode segment base address of
416	; protected-mode 16-bit code segment	416	; protected-mode 16-bit code segment
417	movzx edx, word [BOOT_VARS+BOOT_APM_DATA_16]; real-mode segment base address of	417	movzx edx, word [BOOT_VARS+BOOT_APM_DATA_16]; real-mode segment base address of
418	; protected-mode 16-bit data segment	418	; protected-mode 16-bit data segment
419		419
420	shl eax, 4	420	shl eax, 4
421	mov [dword apm_code_32 + 2], ax	421	mov [dword apm_code_32 + 2], ax
422	shr eax, 16	422	shr eax, 16
423	mov [dword apm_code_32 + 4], al	423	mov [dword apm_code_32 + 4], al
424		424
425	shl ecx, 4	425	shl ecx, 4
426	mov [dword apm_code_16 + 2], cx	426	mov [dword apm_code_16 + 2], cx
427	shr ecx, 16	427	shr ecx, 16
428	mov [dword apm_code_16 + 4], cl	428	mov [dword apm_code_16 + 4], cl
429		429
430	shl edx, 4	430	shl edx, 4
431	mov [dword apm_data_16 + 2], dx	431	mov [dword apm_data_16 + 2], dx
432	shr edx, 16	432	shr edx, 16
433	mov [dword apm_data_16 + 4], dl	433	mov [dword apm_data_16 + 4], dl
434		434
435	mov dword[apm_entry], ebx	435	mov dword[apm_entry], ebx
436	mov word [apm_entry + 4], apm_code_32 - gdts	436	mov word [apm_entry + 4], apm_code_32 - gdts
437		437
438	mov eax, [BOOT_VARS + BOOT_APM_VERSION] ; version & flags	438	mov eax, [BOOT_VARS + BOOT_APM_VERSION] ; version & flags
439	mov [apm_vf], eax	439	mov [apm_vf], eax
440	; -----------------------------------------	440	; -----------------------------------------
441	mov al, [BOOT_VARS+BOOT_DMA] ; DMA access	441	mov al, [BOOT_VARS+BOOT_DMA] ; DMA access
442	mov [allow_dma_access], al	442	mov [allow_dma_access], al
443		443
444	mov al, [BOOT_VARS+BOOT_DEBUG_PRINT] ; If nonzero, duplicates debug output to the screen	444	mov al, [BOOT_VARS+BOOT_DEBUG_PRINT] ; If nonzero, duplicates debug output to the screen
445	mov [debug_direct_print], al	445	mov [debug_direct_print], al
446		446
447	mov al, [BOOT_VARS+BOOT_LAUNCHER_START] ; Start the first app (LAUNCHER) after kernel is loaded?	447	mov al, [BOOT_VARS+BOOT_LAUNCHER_START] ; Start the first app (LAUNCHER) after kernel is loaded?
448	mov [launcher_start], al	448	mov [launcher_start], al
449		449
450	mov esi, BOOT_VARS+0x9080	450	mov esi, BOOT_VARS+0x9080
451	movzx ecx, byte [esi-1]	451	movzx ecx, byte [esi-1]
452	mov [NumBiosDisks], ecx	452	mov [NumBiosDisks], ecx
453	mov edi, BiosDisksData	453	mov edi, BiosDisksData
454	rep movsd	454	rep movsd
455		455
456	; -------- Fast System Call init ----------	456	; -------- Fast System Call init ----------
457	; Intel SYSENTER/SYSEXIT (AMD CPU support it too)	457	; Intel SYSENTER/SYSEXIT (AMD CPU support it too)
458	bt [cpu_caps], CAPS_SEP	458	bt [cpu_caps], CAPS_SEP
459	jnc .SEnP ; SysEnter not Present	459	jnc .SEnP ; SysEnter not Present
460	xor edx, edx	460	xor edx, edx
461	mov ecx, MSR_SYSENTER_CS	461	mov ecx, MSR_SYSENTER_CS
462	mov eax, os_code	462	mov eax, os_code
463	wrmsr	463	wrmsr
464	mov ecx, MSR_SYSENTER_ESP	464	mov ecx, MSR_SYSENTER_ESP
465	; mov eax, sysenter_stack ; Check it	465	; mov eax, sysenter_stack ; Check it
466	xor eax, eax	466	xor eax, eax
467	wrmsr	467	wrmsr
468	mov ecx, MSR_SYSENTER_EIP	468	mov ecx, MSR_SYSENTER_EIP
469	mov eax, sysenter_entry	469	mov eax, sysenter_entry
470	wrmsr	470	wrmsr
471	.SEnP:	471	.SEnP:
472	; AMD SYSCALL/SYSRET	472	; AMD SYSCALL/SYSRET
473	cmp byte[cpu_vendor], 'A'	473	cmp byte[cpu_vendor], 'A'
474	jne .noSYSCALL	474	jne .noSYSCALL
475	mov eax, 0x80000001	475	mov eax, 0x80000001
476	cpuid	476	cpuid
477	test edx, 0x800 ; bit_11 - SYSCALL/SYSRET support	477	test edx, 0x800 ; bit_11 - SYSCALL/SYSRET support
478	jz .noSYSCALL	478	jz .noSYSCALL
479	mov ecx, MSR_AMD_EFER	479	mov ecx, MSR_AMD_EFER
480	rdmsr	480	rdmsr
481	or eax, 1 ; bit_0 - System Call Extension (SCE)	481	or eax, 1 ; bit_0 - System Call Extension (SCE)
482	wrmsr	482	wrmsr
483		483
484	; !!!! It`s dirty hack, fix it !!!	484	; !!!! It`s dirty hack, fix it !!!
485	; Bits of EDX :	485	; Bits of EDX :
486	; Bit 31–16 During the SYSRET instruction, this field is copied into the CS register	486	; Bit 31–16 During the SYSRET instruction, this field is copied into the CS register
487	; and the contents of this field, plus 8, are copied into the SS register.	487	; and the contents of this field, plus 8, are copied into the SS register.
488	; Bit 15–0 During the SYSCALL instruction, this field is copied into the CS register	488	; Bit 15–0 During the SYSCALL instruction, this field is copied into the CS register
489	; and the contents of this field, plus 8, are copied into the SS register.	489	; and the contents of this field, plus 8, are copied into the SS register.
490		490
491	; mov edx, (os_code + 16) * 65536 + os_code	491	; mov edx, (os_code + 16) * 65536 + os_code
492	mov edx, 0x1B0008	492	mov edx, 0x1B0008
493		493
494	mov eax, syscall_entry	494	mov eax, syscall_entry
495	mov ecx, MSR_AMD_STAR	495	mov ecx, MSR_AMD_STAR
496	wrmsr	496	wrmsr
497	.noSYSCALL:	497	.noSYSCALL:
498	; -----------------------------------------	498	; -----------------------------------------
499	stdcall alloc_page	499	stdcall alloc_page
500	stdcall map_page, tss-0xF80, eax, PG_SWR	500	stdcall map_page, tss-0xF80, eax, PG_SWR

Subversion Repositories Kolibri OS

(root)/kernel/branches/Kolibri-acpi/kernel.asm – Rev 6261 → 6311