Rev 5363 | Go to most recent revision | Only display areas with differences | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed
| Rev 5363 | Rev 5522 | ||
|---|---|---|---|
| 1 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
1 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 2 | ;; ;; |
2 | ;; ;; |
| 3 | ;; Copyright (C) KolibriOS team 2004-2015. All rights reserved. ;; |
3 | ;; Copyright (C) KolibriOS team 2004-2015. All rights reserved. ;; |
| 4 | ;; Distributed under terms of the GNU General Public License ;; |
4 | ;; Distributed under terms of the GNU General Public License ;; |
| 5 | ;; ;; |
5 | ;; ;; |
| 6 | ;; MTD80x driver for KolibriOS ;; |
6 | ;; MTD80x driver for KolibriOS ;; |
| 7 | ;; ;; |
7 | ;; ;; |
| 8 | ;; Based on mtd80x.c from the etherboot project ;; |
8 | ;; Based on mtd80x.c from the etherboot project ;; |
| 9 | ;; ;; |
9 | ;; ;; |
| 10 | ;; Written by hidnplayr@kolibrios.org ;; |
10 | ;; Written by hidnplayr@kolibrios.org ;; |
| 11 | ;; ;; |
11 | ;; ;; |
| 12 | ;; GNU GENERAL PUBLIC LICENSE ;; |
12 | ;; GNU GENERAL PUBLIC LICENSE ;; |
| 13 | ;; Version 2, June 1991 ;; |
13 | ;; Version 2, June 1991 ;; |
| 14 | ;; ;; |
14 | ;; ;; |
| 15 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
15 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 16 | 16 | ||
| 17 | format PE DLL native |
17 | format PE DLL native |
| 18 | entry START |
18 | entry START |
| 19 | 19 | ||
| 20 | CURRENT_API = 0x0200 |
20 | CURRENT_API = 0x0200 |
| 21 | COMPATIBLE_API = 0x0100 |
21 | COMPATIBLE_API = 0x0100 |
| 22 | API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API |
22 | API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API |
| 23 | 23 | ||
| 24 | MAX_DEVICES = 16 |
24 | MAX_DEVICES = 16 |
| 25 | 25 | ||
| 26 | __DEBUG__ = 1 |
26 | __DEBUG__ = 1 |
| 27 | __DEBUG_LEVEL__ = 2 |
27 | __DEBUG_LEVEL__ = 2 |
| 28 | 28 | ||
| 29 | NUM_TX_DESC = 6 |
29 | NUM_TX_DESC = 6 |
| 30 | NUM_RX_DESC = 12 |
30 | NUM_RX_DESC = 12 |
| 31 | 31 | ||
| 32 | section '.flat' readable writable executable |
32 | section '.flat' readable writable executable |
| 33 | 33 | ||
| 34 | include '../proc32.inc' |
34 | include '../proc32.inc' |
| 35 | include '../struct.inc' |
35 | include '../struct.inc' |
| 36 | include '../macros.inc' |
36 | include '../macros.inc' |
| 37 | include '../fdo.inc' |
37 | include '../fdo.inc' |
| 38 | include '../netdrv.inc' |
38 | include '../netdrv.inc' |
| 39 | 39 | ||
| 40 | ; for different PHY |
40 | ; for different PHY |
| 41 | 41 | ||
| 42 | MysonPHY = 1 |
42 | MysonPHY = 1 |
| 43 | AhdocPHY = 2 |
43 | AhdocPHY = 2 |
| 44 | SeeqPHY = 3 |
44 | SeeqPHY = 3 |
| 45 | MarvellPHY = 4 |
45 | MarvellPHY = 4 |
| 46 | Myson981 = 5 |
46 | Myson981 = 5 |
| 47 | LevelOnePHY = 6 |
47 | LevelOnePHY = 6 |
| 48 | OtherPHY = 10 |
48 | OtherPHY = 10 |
| 49 | 49 | ||
| 50 | ; Offsets to the Command and Status Registers. |
50 | ; Offsets to the Command and Status Registers. |
| 51 | 51 | ||
| 52 | PAR0 = 0x0 ; physical address 0-3 |
52 | PAR0 = 0x0 ; physical address 0-3 |
| 53 | PAR1 = 0x04 ; physical address 4-5 |
53 | PAR1 = 0x04 ; physical address 4-5 |
| 54 | MAR0 = 0x08 ; multicast address 0-3 |
54 | MAR0 = 0x08 ; multicast address 0-3 |
| 55 | MAR1 = 0x0C ; multicast address 4-7 |
55 | MAR1 = 0x0C ; multicast address 4-7 |
| 56 | FAR0 = 0x10 ; flow-control address 0-3 |
56 | FAR0 = 0x10 ; flow-control address 0-3 |
| 57 | FAR1 = 0x14 ; flow-control address 4-5 |
57 | FAR1 = 0x14 ; flow-control address 4-5 |
| 58 | TCRRCR = 0x18 ; receive & transmit configuration |
58 | TCRRCR = 0x18 ; receive & transmit configuration |
| 59 | BCR = 0x1C ; bus command |
59 | BCR = 0x1C ; bus command |
| 60 | TXPDR = 0x20 ; transmit polling demand |
60 | TXPDR = 0x20 ; transmit polling demand |
| 61 | RXPDR = 0x24 ; receive polling demand |
61 | RXPDR = 0x24 ; receive polling demand |
| 62 | RXCWP = 0x28 ; receive current word pointer |
62 | RXCWP = 0x28 ; receive current word pointer |
| 63 | TXLBA = 0x2C ; transmit list base address |
63 | TXLBA = 0x2C ; transmit list base address |
| 64 | RXLBA = 0x30 ; receive list base address |
64 | RXLBA = 0x30 ; receive list base address |
| 65 | ISR = 0x34 ; interrupt status |
65 | ISR = 0x34 ; interrupt status |
| 66 | IMR = 0x38 ; interrupt mask |
66 | IMR = 0x38 ; interrupt mask |
| 67 | FTH = 0x3C ; flow control high/low threshold |
67 | FTH = 0x3C ; flow control high/low threshold |
| 68 | MANAGEMENT = 0x40 ; bootrom/eeprom and mii management |
68 | MANAGEMENT = 0x40 ; bootrom/eeprom and mii management |
| 69 | TALLY = 0x44 ; tally counters for crc and mpa |
69 | TALLY = 0x44 ; tally counters for crc and mpa |
| 70 | TSR = 0x48 ; tally counter for transmit status |
70 | TSR = 0x48 ; tally counter for transmit status |
| 71 | BMCRSR = 0x4c ; basic mode control and status |
71 | BMCRSR = 0x4c ; basic mode control and status |
| 72 | PHYIDENTIFIER = 0x50 ; phy identifier |
72 | PHYIDENTIFIER = 0x50 ; phy identifier |
| 73 | ANARANLPAR = 0x54 ; auto-negotiation advertisement and link partner ability |
73 | ANARANLPAR = 0x54 ; auto-negotiation advertisement and link partner ability |
| 74 | ANEROCR = 0x58 ; auto-negotiation expansion and pci conf. |
74 | ANEROCR = 0x58 ; auto-negotiation expansion and pci conf. |
| 75 | BPREMRPSR = 0x5c ; bypass & receive error mask and phy status |
75 | BPREMRPSR = 0x5c ; bypass & receive error mask and phy status |
| 76 | 76 | ||
| 77 | ; Bits in the interrupt status/enable registers. |
77 | ; Bits in the interrupt status/enable registers. |
| 78 | 78 | ||
| 79 | RFCON = 0x00020000 ; receive flow control xon packet |
79 | RFCON = 0x00020000 ; receive flow control xon packet |
| 80 | RFCOFF = 0x00010000 ; receive flow control xoff packet |
80 | RFCOFF = 0x00010000 ; receive flow control xoff packet |
| 81 | LSCStatus = 0x00008000 ; link status change |
81 | LSCStatus = 0x00008000 ; link status change |
| 82 | ANCStatus = 0x00004000 ; autonegotiation completed |
82 | ANCStatus = 0x00004000 ; autonegotiation completed |
| 83 | FBE = 0x00002000 ; fatal bus error |
83 | FBE = 0x00002000 ; fatal bus error |
| 84 | FBEMask = 0x00001800 ; mask bit12-11 |
84 | FBEMask = 0x00001800 ; mask bit12-11 |
| 85 | ParityErr = 0x00000000 ; parity error |
85 | ParityErr = 0x00000000 ; parity error |
| 86 | TargetErr = 0x00001000 ; target abort |
86 | TargetErr = 0x00001000 ; target abort |
| 87 | MasterErr = 0x00000800 ; master error |
87 | MasterErr = 0x00000800 ; master error |
| 88 | TUNF = 0x00000400 ; transmit underflow |
88 | TUNF = 0x00000400 ; transmit underflow |
| 89 | ROVF = 0x00000200 ; receive overflow |
89 | ROVF = 0x00000200 ; receive overflow |
| 90 | ETI = 0x00000100 ; transmit early int |
90 | ETI = 0x00000100 ; transmit early int |
| 91 | ERI = 0x00000080 ; receive early int |
91 | ERI = 0x00000080 ; receive early int |
| 92 | CNTOVF = 0x00000040 ; counter overflow |
92 | CNTOVF = 0x00000040 ; counter overflow |
| 93 | RBU = 0x00000020 ; receive buffer unavailable |
93 | RBU = 0x00000020 ; receive buffer unavailable |
| 94 | TBU = 0x00000010 ; transmit buffer unavilable |
94 | TBU = 0x00000010 ; transmit buffer unavilable |
| 95 | TI = 0x00000008 ; transmit interrupt |
95 | TI = 0x00000008 ; transmit interrupt |
| 96 | RI = 0x00000004 ; receive interrupt |
96 | RI = 0x00000004 ; receive interrupt |
| 97 | RxErr = 0x00000002 ; receive error |
97 | RxErr = 0x00000002 ; receive error |
| 98 | 98 | ||
| 99 | ; Bits in the NetworkConfig register. |
99 | ; Bits in the NetworkConfig register. |
| 100 | 100 | ||
| 101 | RxModeMask = 0xe0 |
101 | RxModeMask = 0xe0 |
| 102 | AcceptAllPhys = 0x80 ; promiscuous mode |
102 | AcceptAllPhys = 0x80 ; promiscuous mode |
| 103 | AcceptBroadcast = 0x40 ; accept broadcast |
103 | AcceptBroadcast = 0x40 ; accept broadcast |
| 104 | AcceptMulticast = 0x20 ; accept mutlicast |
104 | AcceptMulticast = 0x20 ; accept mutlicast |
| 105 | AcceptRunt = 0x08 ; receive runt pkt |
105 | AcceptRunt = 0x08 ; receive runt pkt |
| 106 | ALP = 0x04 ; receive long pkt |
106 | ALP = 0x04 ; receive long pkt |
| 107 | AcceptErr = 0x02 ; receive error pkt |
107 | AcceptErr = 0x02 ; receive error pkt |
| 108 | 108 | ||
| 109 | AcceptMyPhys = 0x00000000 |
109 | AcceptMyPhys = 0x00000000 |
| 110 | RxEnable = 0x00000001 |
110 | RxEnable = 0x00000001 |
| 111 | RxFlowCtrl = 0x00002000 |
111 | RxFlowCtrl = 0x00002000 |
| 112 | TxEnable = 0x00040000 |
112 | TxEnable = 0x00040000 |
| 113 | TxModeFDX = 0x00100000 |
113 | TxModeFDX = 0x00100000 |
| 114 | TxThreshold = 0x00e00000 |
114 | TxThreshold = 0x00e00000 |
| 115 | 115 | ||
| 116 | PS1000 = 0x00010000 |
116 | PS1000 = 0x00010000 |
| 117 | PS10 = 0x00080000 |
117 | PS10 = 0x00080000 |
| 118 | FD = 0x00100000 |
118 | FD = 0x00100000 |
| 119 | 119 | ||
| 120 | 120 | ||
| 121 | ; Bits in network_desc.status |
121 | ; Bits in network_desc.status |
| 122 | 122 | ||
| 123 | RXOWN = 0x80000000 ; own bit |
123 | RXOWN = 0x80000000 ; own bit |
| 124 | FLNGMASK = 0x0fff0000 ; frame length |
124 | FLNGMASK = 0x0fff0000 ; frame length |
| 125 | FLNGShift = 16 |
125 | FLNGShift = 16 |
| 126 | MARSTATUS = 0x00004000 ; multicast address received |
126 | MARSTATUS = 0x00004000 ; multicast address received |
| 127 | BARSTATUS = 0x00002000 ; broadcast address received |
127 | BARSTATUS = 0x00002000 ; broadcast address received |
| 128 | PHYSTATUS = 0x00001000 ; physical address received |
128 | PHYSTATUS = 0x00001000 ; physical address received |
| 129 | RXFSD = 0x00000800 ; first descriptor |
129 | RXFSD = 0x00000800 ; first descriptor |
| 130 | RXLSD = 0x00000400 ; last descriptor |
130 | RXLSD = 0x00000400 ; last descriptor |
| 131 | ErrorSummary = 0x80 ; error summary |
131 | ErrorSummary = 0x80 ; error summary |
| 132 | RUNT = 0x40 ; runt packet received |
132 | RUNT = 0x40 ; runt packet received |
| 133 | LONG = 0x20 ; long packet received |
133 | LONG = 0x20 ; long packet received |
| 134 | FAE = 0x10 ; frame align error |
134 | FAE = 0x10 ; frame align error |
| 135 | CRC = 0x08 ; crc error |
135 | CRC = 0x08 ; crc error |
| 136 | RXER = 0x04 ; receive error |
136 | RXER = 0x04 ; receive error |
| 137 | 137 | ||
| 138 | ; rx_desc_control_bits |
138 | ; rx_desc_control_bits |
| 139 | 139 | ||
| 140 | RXIC = 0x00800000 ; interrupt control |
140 | RXIC = 0x00800000 ; interrupt control |
| 141 | RBSShift = 0 |
141 | RBSShift = 0 |
| 142 | 142 | ||
| 143 | ; tx_desc_status_bits |
143 | ; tx_desc_status_bits |
| 144 | 144 | ||
| 145 | TXOWN = 0x80000000 ; own bit |
145 | TXOWN = 0x80000000 ; own bit |
| 146 | JABTO = 0x00004000 ; jabber timeout |
146 | JABTO = 0x00004000 ; jabber timeout |
| 147 | CSL = 0x00002000 ; carrier sense lost |
147 | CSL = 0x00002000 ; carrier sense lost |
| 148 | LC = 0x00001000 ; late collision |
148 | LC = 0x00001000 ; late collision |
| 149 | EC = 0x00000800 ; excessive collision |
149 | EC = 0x00000800 ; excessive collision |
| 150 | UDF = 0x00000400 ; fifo underflow |
150 | UDF = 0x00000400 ; fifo underflow |
| 151 | DFR = 0x00000200 ; deferred |
151 | DFR = 0x00000200 ; deferred |
| 152 | HF = 0x00000100 ; heartbeat fail |
152 | HF = 0x00000100 ; heartbeat fail |
| 153 | NCRMask = 0x000000ff ; collision retry count |
153 | NCRMask = 0x000000ff ; collision retry count |
| 154 | NCRShift = 0 |
154 | NCRShift = 0 |
| 155 | 155 | ||
| 156 | ; tx_desc_control_bits |
156 | ; tx_desc_control_bits |
| 157 | 157 | ||
| 158 | TXIC = 0x80000000 ; interrupt control |
158 | TXIC = 0x80000000 ; interrupt control |
| 159 | ETIControl = 0x40000000 ; early transmit interrupt |
159 | ETIControl = 0x40000000 ; early transmit interrupt |
| 160 | TXLD = 0x20000000 ; last descriptor |
160 | TXLD = 0x20000000 ; last descriptor |
| 161 | TXFD = 0x10000000 ; first descriptor |
161 | TXFD = 0x10000000 ; first descriptor |
| 162 | CRCEnable = 0x08000000 ; crc control |
162 | CRCEnable = 0x08000000 ; crc control |
| 163 | PADEnable = 0x04000000 ; padding control |
163 | PADEnable = 0x04000000 ; padding control |
| 164 | RetryTxLC = 0x02000000 ; retry late collision |
164 | RetryTxLC = 0x02000000 ; retry late collision |
| 165 | PKTSMask = 0x3ff800 ; packet size bit21-11 |
165 | PKTSMask = 0x3ff800 ; packet size bit21-11 |
| 166 | PKTSShift = 11 |
166 | PKTSShift = 11 |
| 167 | TBSMask = 0x000007ff ; transmit buffer bit 10-0 |
167 | TBSMask = 0x000007ff ; transmit buffer bit 10-0 |
| 168 | TBSShift = 0 |
168 | TBSShift = 0 |
| 169 | 169 | ||
| 170 | ; BootROM/EEPROM/MII Management Register |
170 | ; BootROM/EEPROM/MII Management Register |
| 171 | 171 | ||
| 172 | MASK_MIIR_MII_READ = 0x00000000 |
172 | MASK_MIIR_MII_READ = 0x00000000 |
| 173 | MASK_MIIR_MII_WRITE = 0x00000008 |
173 | MASK_MIIR_MII_WRITE = 0x00000008 |
| 174 | MASK_MIIR_MII_MDO = 0x00000004 |
174 | MASK_MIIR_MII_MDO = 0x00000004 |
| 175 | MASK_MIIR_MII_MDI = 0x00000002 |
175 | MASK_MIIR_MII_MDI = 0x00000002 |
| 176 | MASK_MIIR_MII_MDC = 0x00000001 |
176 | MASK_MIIR_MII_MDC = 0x00000001 |
| 177 | 177 | ||
| 178 | ; ST+OP+PHYAD+REGAD+TA |
178 | ; ST+OP+PHYAD+REGAD+TA |
| 179 | 179 | ||
| 180 | OP_READ = 0x6000 ; ST:01+OP:10+PHYAD+REGAD+TA:Z0 |
180 | OP_READ = 0x6000 ; ST:01+OP:10+PHYAD+REGAD+TA:Z0 |
| 181 | OP_WRITE = 0x5002 ; ST:01+OP:01+PHYAD+REGAD+TA:10 |
181 | OP_WRITE = 0x5002 ; ST:01+OP:01+PHYAD+REGAD+TA:10 |
| 182 | 182 | ||
| 183 | ; ------------------------------------------------------------------------- |
183 | ; ------------------------------------------------------------------------- |
| 184 | ; Constants for Myson PHY |
184 | ; Constants for Myson PHY |
| 185 | ; ------------------------------------------------------------------------- |
185 | ; ------------------------------------------------------------------------- |
| 186 | 186 | ||
| 187 | MysonPHYID = 0xd0000302 |
187 | MysonPHYID = 0xd0000302 |
| 188 | MysonPHYID0 = 0x0302 |
188 | MysonPHYID0 = 0x0302 |
| 189 | StatusRegister = 18 |
189 | StatusRegister = 18 |
| 190 | SPEED100 = 0x0400 ; bit10 |
190 | SPEED100 = 0x0400 ; bit10 |
| 191 | FULLMODE = 0x0800 ; bit11 |
191 | FULLMODE = 0x0800 ; bit11 |
| 192 | 192 | ||
| 193 | ; ------------------------------------------------------------------------- |
193 | ; ------------------------------------------------------------------------- |
| 194 | ; Constants for Seeq 80225 PHY |
194 | ; Constants for Seeq 80225 PHY |
| 195 | ; ------------------------------------------------------------------------- |
195 | ; ------------------------------------------------------------------------- |
| 196 | 196 | ||
| 197 | SeeqPHYID0 = 0x0016 |
197 | SeeqPHYID0 = 0x0016 |
| 198 | MIIRegister18 = 18 |
198 | MIIRegister18 = 18 |
| 199 | SPD_DET_100 = 0x80 |
199 | SPD_DET_100 = 0x80 |
| 200 | DPLX_DET_FULL = 0x40 |
200 | DPLX_DET_FULL = 0x40 |
| 201 | 201 | ||
| 202 | ; ------------------------------------------------------------------------- |
202 | ; ------------------------------------------------------------------------- |
| 203 | ; Constants for Ahdoc 101 PHY |
203 | ; Constants for Ahdoc 101 PHY |
| 204 | ; ------------------------------------------------------------------------- |
204 | ; ------------------------------------------------------------------------- |
| 205 | 205 | ||
| 206 | AhdocPHYID0 = 0x0022 |
206 | AhdocPHYID0 = 0x0022 |
| 207 | DiagnosticReg = 18 |
207 | DiagnosticReg = 18 |
| 208 | DPLX_FULL = 0x0800 |
208 | DPLX_FULL = 0x0800 |
| 209 | Speed_100 = 0x0400 |
209 | Speed_100 = 0x0400 |
| 210 | 210 | ||
| 211 | ; -------------------------------------------------------------------------- |
211 | ; -------------------------------------------------------------------------- |
| 212 | ; Constants |
212 | ; Constants |
| 213 | ; -------------------------------------------------------------------------- |
213 | ; -------------------------------------------------------------------------- |
| 214 | 214 | ||
| 215 | MarvellPHYID0 = 0x0141 |
215 | MarvellPHYID0 = 0x0141 |
| 216 | LevelOnePHYID0 = 0x0013 |
216 | LevelOnePHYID0 = 0x0013 |
| 217 | 217 | ||
| 218 | MII1000BaseTControlReg = 9 |
218 | MII1000BaseTControlReg = 9 |
| 219 | MII1000BaseTStatusReg = 10 |
219 | MII1000BaseTStatusReg = 10 |
| 220 | SpecificReg = 17 |
220 | SpecificReg = 17 |
| 221 | 221 | ||
| 222 | ; for 1000BaseT Control Register |
222 | ; for 1000BaseT Control Register |
| 223 | 223 | ||
| 224 | PHYAbletoPerform1000FullDuplex = 0x0200 |
224 | PHYAbletoPerform1000FullDuplex = 0x0200 |
| 225 | PHYAbletoPerform1000HalfDuplex = 0x0100 |
225 | PHYAbletoPerform1000HalfDuplex = 0x0100 |
| 226 | PHY1000AbilityMask = 0x300 |
226 | PHY1000AbilityMask = 0x300 |
| 227 | 227 | ||
| 228 | ; for phy specific status register, marvell phy. |
228 | ; for phy specific status register, marvell phy. |
| 229 | 229 | ||
| 230 | SpeedMask = 0x0c000 |
230 | SpeedMask = 0x0c000 |
| 231 | Speed_1000M = 0x08000 |
231 | Speed_1000M = 0x08000 |
| 232 | Speed_100M = 0x4000 |
232 | Speed_100M = 0x4000 |
| 233 | Speed_10M = 0 |
233 | Speed_10M = 0 |
| 234 | Full_Duplex = 0x2000 |
234 | Full_Duplex = 0x2000 |
| 235 | 235 | ||
| 236 | ; for phy specific status register, levelone phy |
236 | ; for phy specific status register, levelone phy |
| 237 | 237 | ||
| 238 | LXT1000_100M = 0x08000 |
238 | LXT1000_100M = 0x08000 |
| 239 | LXT1000_1000M = 0x0c000 |
239 | LXT1000_1000M = 0x0c000 |
| 240 | LXT1000_Full = 0x200 |
240 | LXT1000_Full = 0x200 |
| 241 | 241 | ||
| 242 | ; for PHY |
242 | ; for PHY |
| 243 | 243 | ||
| 244 | LinkIsUp = 0x0004 |
244 | LinkIsUp = 0x0004 |
| 245 | LinkIsUp2 = 0x00040000 |
245 | LinkIsUp2 = 0x00040000 |
| 246 | 246 | ||
| 247 | 247 | ||
| 248 | 248 | ||
| 249 | struct descriptor |
249 | struct descriptor |
| 250 | status dd ? |
250 | status dd ? |
| 251 | control dd ? |
251 | control dd ? |
| 252 | buffer dd ? |
252 | buffer dd ? |
| 253 | next_desc dd ? |
253 | next_desc dd ? |
| 254 | 254 | ||
| 255 | next_desc_logical dd ? |
255 | next_desc_logical dd ? |
| 256 | skbuff dd ? |
256 | skbuff dd ? |
| 257 | reserved1 dd ? |
257 | reserved1 dd ? |
| 258 | reserved2 dd ? |
258 | reserved2 dd ? |
| 259 | ends |
259 | ends |
| 260 | 260 | ||
| 261 | 261 | ||
| 262 | struct device ETH_DEVICE |
262 | struct device ETH_DEVICE |
| 263 | 263 | ||
| 264 | io_addr dd ? |
264 | io_addr dd ? |
| 265 | pci_bus dd ? |
265 | pci_bus dd ? |
| 266 | pci_dev dd ? |
266 | pci_dev dd ? |
| 267 | irq_line db ? |
267 | irq_line db ? |
| 268 | dev_id dw ? |
268 | dev_id dw ? |
| 269 | flags dd ? |
269 | flags dd ? |
| 270 | crvalue dd ? |
270 | crvalue dd ? |
| 271 | bcrvalue dd ? |
271 | bcrvalue dd ? |
| 272 | cur_rx dd ? |
272 | cur_rx dd ? |
| 273 | cur_tx dd ? |
273 | cur_tx dd ? |
| 274 | default_port dd ? |
274 | default_port dd ? |
| 275 | PHYType dd ? |
275 | PHYType dd ? |
| 276 | 276 | ||
| 277 | ; MII transceiver section. |
277 | ; MII transceiver section. |
| 278 | mii_cnt dd ? ; MII device addresses. |
278 | mii_cnt dd ? ; MII device addresses. |
| 279 | phys db ? ; MII device addresses. |
279 | phys db ? ; MII device addresses. |
| 280 | 280 | ||
| 281 | ; descriptors |
281 | ; descriptors |
| 282 | rb 0x100 - ($ and 0xff) ; align 256 |
282 | rb 0x100 - ($ and 0xff) ; align 256 |
| 283 | tx_desc rb NUM_TX_DESC*sizeof.descriptor |
283 | tx_desc rb NUM_TX_DESC*sizeof.descriptor |
| 284 | rx_desc rb NUM_RX_DESC*sizeof.descriptor |
284 | rx_desc rb NUM_RX_DESC*sizeof.descriptor |
| 285 | 285 | ||
| 286 | ends |
286 | ends |
| 287 | 287 | ||
| 288 | 288 | ||
| 289 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
289 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 290 | ;; ;; |
290 | ;; ;; |
| 291 | ;; proc START ;; |
291 | ;; proc START ;; |
| 292 | ;; ;; |
292 | ;; ;; |
| 293 | ;; (standard driver proc) ;; |
293 | ;; (standard driver proc) ;; |
| 294 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
294 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 295 | 295 | ||
| 296 | proc START c, reason:dword, cmdline:dword |
296 | proc START c, reason:dword, cmdline:dword |
| 297 | 297 | ||
| 298 | cmp [reason], DRV_ENTRY |
298 | cmp [reason], DRV_ENTRY |
| 299 | jne .fail |
299 | jne .fail |
| 300 | 300 | ||
| 301 | DEBUGF 1,"Loading driver\n" |
301 | DEBUGF 1,"Loading driver\n" |
| 302 | invoke RegService, my_service, service_proc |
302 | invoke RegService, my_service, service_proc |
| 303 | ret |
303 | ret |
| 304 | 304 | ||
| 305 | .fail: |
305 | .fail: |
| 306 | xor eax, eax |
306 | xor eax, eax |
| 307 | ret |
307 | ret |
| 308 | 308 | ||
| 309 | endp |
309 | endp |
| 310 | 310 | ||
| 311 | 311 | ||
| 312 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
312 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 313 | ;; ;; |
313 | ;; ;; |
| 314 | ;; proc SERVICE_PROC ;; |
314 | ;; proc SERVICE_PROC ;; |
| 315 | ;; ;; |
315 | ;; ;; |
| 316 | ;; (standard driver proc) ;; |
316 | ;; (standard driver proc) ;; |
| 317 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
317 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 318 | 318 | ||
| 319 | proc service_proc stdcall, ioctl:dword |
319 | proc service_proc stdcall, ioctl:dword |
| 320 | 320 | ||
| 321 | mov edx, [ioctl] |
321 | mov edx, [ioctl] |
| 322 | mov eax, [edx + IOCTL.io_code] |
322 | mov eax, [edx + IOCTL.io_code] |
| 323 | 323 | ||
| 324 | ;------------------------------------------------------ |
324 | ;------------------------------------------------------ |
| 325 | 325 | ||
| 326 | cmp eax, 0 ;SRV_GETVERSION |
326 | cmp eax, 0 ;SRV_GETVERSION |
| 327 | jne @F |
327 | jne @F |
| 328 | 328 | ||
| 329 | cmp [edx + IOCTL.out_size], 4 |
329 | cmp [edx + IOCTL.out_size], 4 |
| 330 | jb .fail |
330 | jb .fail |
| 331 | mov eax, [edx + IOCTL.output] |
331 | mov eax, [edx + IOCTL.output] |
| 332 | mov [eax], dword API_VERSION |
332 | mov [eax], dword API_VERSION |
| 333 | 333 | ||
| 334 | xor eax, eax |
334 | xor eax, eax |
| 335 | ret |
335 | ret |
| 336 | 336 | ||
| 337 | ;------------------------------------------------------ |
337 | ;------------------------------------------------------ |
| 338 | @@: |
338 | @@: |
| 339 | cmp eax, 1 ;SRV_HOOK |
339 | cmp eax, 1 ;SRV_HOOK |
| 340 | jne .fail |
340 | jne .fail |
| 341 | 341 | ||
| 342 | cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes |
342 | cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes |
| 343 | jb .fail |
343 | jb .fail |
| 344 | 344 | ||
| 345 | mov eax, [edx + IOCTL.input] |
345 | mov eax, [edx + IOCTL.input] |
| 346 | cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given |
346 | cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given |
| 347 | jne .fail ; other types arent supported for this card yet |
347 | jne .fail ; other types arent supported for this card yet |
| 348 | 348 | ||
| 349 | ; check if the device is already listed |
349 | ; check if the device is already listed |
| 350 | 350 | ||
| 351 | mov esi, device_list |
351 | mov esi, device_list |
| 352 | mov ecx, [devices] |
352 | mov ecx, [devices] |
| 353 | test ecx, ecx |
353 | test ecx, ecx |
| 354 | jz .firstdevice |
354 | jz .firstdevice |
| 355 | 355 | ||
| 356 | ; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers |
356 | ; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers |
| 357 | mov ax, [eax+1] ; |
357 | mov ax, [eax+1] ; |
| 358 | .nextdevice: |
358 | .nextdevice: |
| 359 | mov ebx, [esi] |
359 | mov ebx, [esi] |
| 360 | cmp al, byte[ebx + device.pci_bus] |
360 | cmp al, byte[ebx + device.pci_bus] |
| 361 | jne @f |
361 | jne @f |
| 362 | cmp ah, byte[ebx + device.pci_dev] |
362 | cmp ah, byte[ebx + device.pci_dev] |
| 363 | je .find_devicenum ; Device is already loaded, let's find it's device number |
363 | je .find_devicenum ; Device is already loaded, let's find it's device number |
| 364 | @@: |
364 | @@: |
| 365 | add esi, 4 |
365 | add esi, 4 |
| 366 | loop .nextdevice |
366 | loop .nextdevice |
| 367 | 367 | ||
| 368 | 368 | ||
| 369 | ; This device doesnt have its own eth_device structure yet, lets create one |
369 | ; This device doesnt have its own eth_device structure yet, lets create one |
| 370 | .firstdevice: |
370 | .firstdevice: |
| 371 | cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
371 | cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
| 372 | jae .fail |
372 | jae .fail |
| 373 | 373 | ||
| 374 | allocate_and_clear ebx, sizeof.device, .fail |
374 | allocate_and_clear ebx, sizeof.device, .fail |
| 375 | 375 | ||
| 376 | ; Fill in the direct call addresses into the struct |
376 | ; Fill in the direct call addresses into the struct |
| 377 | 377 | ||
| 378 | mov [ebx + device.reset], reset |
378 | mov [ebx + device.reset], reset |
| 379 | mov [ebx + device.transmit], transmit |
379 | mov [ebx + device.transmit], transmit |
| 380 | mov [ebx + device.unload], unload |
380 | mov [ebx + device.unload], unload |
| 381 | mov [ebx + device.name], my_service |
381 | mov [ebx + device.name], my_service |
| 382 | 382 | ||
| 383 | ; save the pci bus and device numbers |
383 | ; save the pci bus and device numbers |
| 384 | 384 | ||
| 385 | mov eax, [edx + IOCTL.input] |
385 | mov eax, [edx + IOCTL.input] |
| 386 | movzx ecx, byte[eax+1] |
386 | movzx ecx, byte[eax+1] |
| 387 | mov [ebx + device.pci_bus], ecx |
387 | mov [ebx + device.pci_bus], ecx |
| 388 | movzx ecx, byte[eax+2] |
388 | movzx ecx, byte[eax+2] |
| 389 | mov [ebx + device.pci_dev], ecx |
389 | mov [ebx + device.pci_dev], ecx |
| 390 | 390 | ||
| 391 | ; Now, it's time to find the base io addres of the PCI device |
391 | ; Now, it's time to find the base io addres of the PCI device |
| 392 | 392 | ||
| 393 | stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] |
393 | stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] |
| 394 | mov [ebx + device.io_addr], eax |
394 | mov [ebx + device.io_addr], eax |
| 395 | 395 | ||
| 396 | ; We've found the io address, find IRQ now |
396 | ; We've found the io address, find IRQ now |
| 397 | 397 | ||
| 398 | invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line |
398 | invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line |
| 399 | mov [ebx + device.irq_line], al |
399 | mov [ebx + device.irq_line], al |
| 400 | 400 | ||
| 401 | DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ |
401 | DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ |
| 402 | [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:8 |
402 | [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:8 |
| 403 | 403 | ||
| 404 | ; Ok, the eth_device structure is ready, let's probe the device |
404 | ; Ok, the eth_device structure is ready, let's probe the device |
| 405 | ; Because initialization fires IRQ, IRQ handler must be aware of this device |
405 | ; Because initialization fires IRQ, IRQ handler must be aware of this device |
| 406 | mov eax, [devices] ; Add the device structure to our device list |
406 | mov eax, [devices] ; Add the device structure to our device list |
| 407 | mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
407 | mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
| 408 | inc [devices] ; |
408 | inc [devices] ; |
| 409 | 409 | ||
| 410 | call probe ; this function will output in eax |
410 | call probe ; this function will output in eax |
| 411 | test eax, eax |
411 | test eax, eax |
| 412 | jnz .err2 ; If an error occured, exit |
412 | jnz .err2 ; If an error occured, exit |
| 413 | 413 | ||
| 414 | mov [ebx + device.type], NET_TYPE_ETH |
414 | mov [ebx + device.type], NET_TYPE_ETH |
| 415 | invoke NetRegDev |
415 | invoke NetRegDev |
| 416 | 416 | ||
| 417 | cmp eax, -1 |
417 | cmp eax, -1 |
| 418 | je .destroy |
418 | je .destroy |
| 419 | 419 | ||
| 420 | ret |
420 | ret |
| 421 | 421 | ||
| 422 | ; If the device was already loaded, find the device number and return it in eax |
422 | ; If the device was already loaded, find the device number and return it in eax |
| 423 | 423 | ||
| 424 | .find_devicenum: |
424 | .find_devicenum: |
| 425 | DEBUGF 2,"Trying to find device number of already registered device\n" |
425 | DEBUGF 2,"Trying to find device number of already registered device\n" |
| 426 | invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
426 | invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
| 427 | ; into a device number in edi |
427 | ; into a device number in edi |
| 428 | mov eax, edi ; Application wants it in eax instead |
428 | mov eax, edi ; Application wants it in eax instead |
| 429 | DEBUGF 2,"Kernel says: %u\n", eax |
429 | DEBUGF 2,"Kernel says: %u\n", eax |
| 430 | ret |
430 | ret |
| 431 | 431 | ||
| 432 | ; If an error occured, remove all allocated data and exit (returning -1 in eax) |
432 | ; If an error occured, remove all allocated data and exit (returning -1 in eax) |
| 433 | 433 | ||
| 434 | .destroy: |
434 | .destroy: |
| 435 | ; todo: reset device into virgin state |
435 | ; todo: reset device into virgin state |
| 436 | 436 | ||
| 437 | .err2: |
437 | .err2: |
| 438 | dec [devices] |
438 | dec [devices] |
| 439 | .err: |
439 | .err: |
| 440 | DEBUGF 2,"removing device structure\n" |
440 | DEBUGF 2,"removing device structure\n" |
| 441 | invoke KernelFree, ebx |
441 | invoke KernelFree, ebx |
| 442 | .fail: |
442 | .fail: |
| 443 | or eax, -1 |
443 | or eax, -1 |
| 444 | ret |
444 | ret |
| 445 | 445 | ||
| 446 | ;------------------------------------------------------ |
446 | ;------------------------------------------------------ |
| 447 | endp |
447 | endp |
| 448 | 448 | ||
| 449 | 449 | ||
| 450 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
450 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
| 451 | ;; ;; |
451 | ;; ;; |
| 452 | ;; Actual Hardware dependent code starts here ;; |
452 | ;; Actual Hardware dependent code starts here ;; |
| 453 | ;; ;; |
453 | ;; ;; |
| 454 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
454 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
| 455 | 455 | ||
| 456 | 456 | ||
| 457 | 457 | ||
| 458 | align 4 |
458 | align 4 |
| 459 | unload: |
459 | unload: |
| 460 | ; TODO: (in this particular order) |
460 | ; TODO: (in this particular order) |
| 461 | ; |
461 | ; |
| 462 | ; - Stop the device |
462 | ; - Stop the device |
| 463 | 463 | ||
| 464 | ; /* Disable Tx Rx*/ |
464 | ; /* Disable Tx Rx*/ |
| 465 | ; outl( mtdx.crvalue & (~TxEnable) & (~RxEnable), mtdx.ioaddr + TCRRCR ); |
465 | ; outl( mtdx.crvalue & (~TxEnable) & (~RxEnable), mtdx.ioaddr + TCRRCR ); |
| 466 | ; |
466 | ; |
| 467 | ; /* Reset the chip to erase previous misconfiguration. */ |
467 | ; /* Reset the chip to erase previous misconfiguration. */ |
| 468 | ; mtd_reset(nic); |
468 | ; mtd_reset(nic); |
| 469 | 469 | ||
| 470 | ; - Detach int handler |
470 | ; - Detach int handler |
| 471 | ; - Remove device from local list (device_list) |
471 | ; - Remove device from local list (device_list) |
| 472 | ; - call unregister function in kernel |
472 | ; - call unregister function in kernel |
| 473 | ; - Remove all allocated structures and buffers the card used |
473 | ; - Remove all allocated structures and buffers the card used |
| 474 | 474 | ||
| 475 | or eax, -1 |
475 | or eax, -1 |
| 476 | - | ||
| 477 | ret |
476 | ret |
| 478 | 477 | ||
| 479 | 478 | ||
| 480 | ;------- |
479 | ;------- |
| 481 | ; |
480 | ; |
| 482 | ; PROBE |
481 | ; PROBE |
| 483 | ; |
482 | ; |
| 484 | ;------- |
483 | ;------- |
| 485 | align 4 |
484 | align 4 |
| 486 | probe: |
485 | probe: |
| 487 | 486 | ||
| 488 | DEBUGF 1,"Probing\n" |
487 | DEBUGF 1,"Probing\n" |
| 489 | 488 | ||
| 490 | ; Make the device a bus master |
489 | ; Make the device a bus master |
| 491 | invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command |
490 | invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command |
| 492 | or al, PCI_CMD_MASTER |
491 | or al, PCI_CMD_MASTER |
| 493 | invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax |
492 | invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax |
| 494 | 493 | ||
| 495 | ; Check vendor/device id's |
494 | ; Check vendor/device id's |
| 496 | invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], 0 |
495 | invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], 0 |
| 497 | cmp ax, 0x1516 |
496 | cmp ax, 0x1516 |
| 498 | jne .notfound |
497 | jne .notfound |
| 499 | shr eax, 16 |
498 | shr eax, 16 |
| 500 | mov [ebx + device.dev_id], ax |
499 | mov [ebx + device.dev_id], ax |
| 501 | cmp ax, 0x0800 |
500 | cmp ax, 0x0800 |
| 502 | je .mtd800 |
501 | je .mtd800 |
| 503 | cmp ax, 0x0803 |
502 | cmp ax, 0x0803 |
| 504 | je .mtd803 |
503 | je .mtd803 |
| 505 | cmp ax, 0x0891 |
504 | cmp ax, 0x0891 |
| 506 | je .mtd891 |
505 | je .mtd891 |
| 507 | 506 | ||
| 508 | .notfound: |
507 | .notfound: |
| 509 | DEBUGF 2,"Device not supported!\n" |
508 | DEBUGF 2,"Device not supported!\n" |
| 510 | xor eax, eax |
509 | xor eax, eax |
| 511 | dec eax |
510 | dec eax |
| 512 | ret |
511 | ret |
| 513 | 512 | ||
| 514 | .mtd803: |
513 | .mtd803: |
| 515 | mov [ebx + device.name], sz_mtd803 |
514 | mov [ebx + device.name], sz_mtd803 |
| 516 | DEBUGF 1,"Device has chip xcvr\n" |
515 | DEBUGF 1,"Device has chip xcvr\n" |
| 517 | jmp .xcvr_set |
516 | jmp .xcvr_set |
| 518 | 517 | ||
| 519 | .mtd800: |
518 | .mtd800: |
| 520 | DEBUGF 1,"Device has mii xcvr\n" |
519 | DEBUGF 1,"Device has mii xcvr\n" |
| 521 | mov [ebx + device.name], sz_mtd800 |
520 | mov [ebx + device.name], sz_mtd800 |
| 522 | jmp .xcvr_set |
521 | jmp .xcvr_set |
| 523 | 522 | ||
| 524 | .mtd891: |
523 | .mtd891: |
| 525 | DEBUGF 1,"Device has mii xcvr\n" |
524 | DEBUGF 1,"Device has mii xcvr\n" |
| 526 | mov [ebx + device.name], sz_mtd800 |
525 | mov [ebx + device.name], sz_mtd800 |
| 527 | 526 | ||
| 528 | .xcvr_set: |
527 | .xcvr_set: |
| 529 | call read_mac |
528 | call read_mac |
| 530 | 529 | ||
| 531 | ; Reset the chip to erase previous misconfiguration. |
530 | ; Reset the chip to erase previous misconfiguration. |
| 532 | set_io [ebx + device.io_addr], 0 |
531 | set_io [ebx + device.io_addr], 0 |
| 533 | set_io [ebx + device.io_addr], BCR |
532 | set_io [ebx + device.io_addr], BCR |
| 534 | xor eax, eax |
533 | xor eax, eax |
| 535 | inc eax |
534 | inc eax |
| 536 | out dx, eax |
535 | out dx, eax |
| 537 | 536 | ||
| 538 | ; find the connected MII xcvrs |
537 | ; find the connected MII xcvrs |
| 539 | cmp [ebx + device.dev_id], 0x0803 |
538 | cmp [ebx + device.dev_id], 0x0803 |
| 540 | je .is_803 |
539 | je .is_803 |
| 541 | 540 | ||
| 542 | ; int phy, phy_idx = 0; |
541 | ; int phy, phy_idx = 0; |
| 543 | ; |
542 | ; |
| 544 | ; for (phy = 1; phy < 32 && phy_idx < 1; phy++) { |
543 | ; for (phy = 1; phy < 32 && phy_idx < 1; phy++) { |
| 545 | ; int mii_status = mdio_read(nic, phy, 1); |
544 | ; int mii_status = mdio_read(nic, phy, 1); |
| 546 | ; |
545 | ; |
| 547 | ; if (mii_status != 0xffff && mii_status != 0x0000) { |
546 | ; if (mii_status != 0xffff && mii_status != 0x0000) { |
| 548 | ; mtdx.phys[phy_idx] = phy; |
547 | ; mtdx.phys[phy_idx] = phy; |
| 549 | ; |
548 | ; |
| 550 | ; DBG ( "%s: MII PHY found at address %d, status " |
549 | ; DBG ( "%s: MII PHY found at address %d, status " |
| 551 | ; "0x%4.4x.\n", mtdx.nic_name, phy, mii_status ); |
550 | ; "0x%4.4x.\n", mtdx.nic_name, phy, mii_status ); |
| 552 | ; /* get phy type */ |
551 | ; /* get phy type */ |
| 553 | ; { |
552 | ; { |
| 554 | ; unsigned int data; |
553 | ; unsigned int data; |
| 555 | ; |
554 | ; |
| 556 | ; data = mdio_read(nic, mtdx.phys[phy_idx], 2); |
555 | ; data = mdio_read(nic, mtdx.phys[phy_idx], 2); |
| 557 | ; if (data equ= SeeqPHYID0) |
556 | ; if (data equ= SeeqPHYID0) |
| 558 | ; mtdx.PHYType = SeeqPHY; |
557 | ; mtdx.PHYType = SeeqPHY; |
| 559 | ; else if (data equ= AhdocPHYID0) |
558 | ; else if (data equ= AhdocPHYID0) |
| 560 | ; mtdx.PHYType = AhdocPHY; |
559 | ; mtdx.PHYType = AhdocPHY; |
| 561 | ; else if (data equ= MarvellPHYID0) |
560 | ; else if (data equ= MarvellPHYID0) |
| 562 | ; mtdx.PHYType = MarvellPHY; |
561 | ; mtdx.PHYType = MarvellPHY; |
| 563 | ; else if (data equ= MysonPHYID0) |
562 | ; else if (data equ= MysonPHYID0) |
| 564 | ; mtdx.PHYType = Myson981; |
563 | ; mtdx.PHYType = Myson981; |
| 565 | ; else if (data equ= LevelOnePHYID0) |
564 | ; else if (data equ= LevelOnePHYID0) |
| 566 | ; mtdx.PHYType = LevelOnePHY; |
565 | ; mtdx.PHYType = LevelOnePHY; |
| 567 | ; else |
566 | ; else |
| 568 | ; mtdx.PHYType = OtherPHY; |
567 | ; mtdx.PHYType = OtherPHY; |
| 569 | ; } |
568 | ; } |
| 570 | ; phy_idx++; |
569 | ; phy_idx++; |
| 571 | ; } |
570 | ; } |
| 572 | ; } |
571 | ; } |
| 573 | ; |
572 | ; |
| 574 | ; mtdx.mii_cnt = phy_idx; |
573 | ; mtdx.mii_cnt = phy_idx; |
| 575 | ; if (phy_idx equ= 0) { |
574 | ; if (phy_idx equ= 0) { |
| 576 | ; printf("%s: MII PHY not found -- this device may " |
575 | ; printf("%s: MII PHY not found -- this device may " |
| 577 | ; "not operate correctly.\n", mtdx.nic_name); |
576 | ; "not operate correctly.\n", mtdx.nic_name); |
| 578 | ; } |
577 | ; } |
| 579 | 578 | ||
| 580 | jmp .no_803 |
579 | jmp .no_803 |
| 581 | 580 | ||
| 582 | .is_803: |
581 | .is_803: |
| 583 | mov [ebx + device.phys], 32 |
582 | mov [ebx + device.phys], 32 |
| 584 | 583 | ||
| 585 | ; get phy type |
584 | ; get phy type |
| 586 | set_io [ebx + device.io_addr], 0 |
585 | set_io [ebx + device.io_addr], 0 |
| 587 | set_io [ebx + device.io_addr], PHYIDENTIFIER |
586 | set_io [ebx + device.io_addr], PHYIDENTIFIER |
| 588 | in eax, dx |
587 | in eax, dx |
| 589 | 588 | ||
| 590 | cmp eax, MysonPHYID |
589 | cmp eax, MysonPHYID |
| 591 | jne @f |
590 | jne @f |
| 592 | mov [ebx + device.PHYType], MysonPHY |
591 | mov [ebx + device.PHYType], MysonPHY |
| 593 | DEBUGF 1,"Myson PHY\n" |
592 | DEBUGF 1,"Myson PHY\n" |
| 594 | jmp .no_803 |
593 | jmp .no_803 |
| 595 | @@: |
594 | @@: |
| 596 | 595 | ||
| 597 | mov [ebx + device.PHYType], OtherPHY |
596 | mov [ebx + device.PHYType], OtherPHY |
| 598 | DEBUGF 1,"Other PHY\n" |
597 | DEBUGF 1,"Other PHY\n" |
| 599 | .no_803: |
598 | .no_803: |
| 600 | 599 | ||
| 601 | ;------- |
600 | ;------- |
| 602 | ; |
601 | ; |
| 603 | ; RESET |
602 | ; RESET |
| 604 | ; |
603 | ; |
| 605 | ;------- |
604 | ;------- |
| 606 | align 4 |
605 | align 4 |
| 607 | reset: |
606 | reset: |
| 608 | 607 | ||
| 609 | DEBUGF 1,"Resetting\n" |
608 | DEBUGF 1,"Resetting\n" |
| 610 | 609 | ||
| 611 | ; attach irq handler |
610 | ; attach irq handler |
| 612 | movzx eax, [ebx + device.irq_line] |
611 | movzx eax, [ebx + device.irq_line] |
| 613 | DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 |
612 | DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 |
| 614 | invoke AttachIntHandler, eax, int_handler, ebx |
613 | invoke AttachIntHandler, eax, int_handler, ebx |
| 615 | test eax, eax |
614 | test eax, eax |
| 616 | jnz @f |
615 | jnz @f |
| 617 | DEBUGF 2,"Could not attach int handler!\n" |
616 | DEBUGF 2,"Could not attach int handler!\n" |
| 618 | or eax, -1 |
617 | or eax, -1 |
| 619 | ret |
618 | ret |
| 620 | @@: |
619 | @@: |
| 621 | 620 | ||
| 622 | ; Reset the chip to erase previous misconfiguration. |
621 | ; Reset the chip to erase previous misconfiguration. |
| 623 | set_io [ebx + device.io_addr], 0 |
622 | set_io [ebx + device.io_addr], 0 |
| 624 | set_io [ebx + device.io_addr], BCR |
623 | set_io [ebx + device.io_addr], BCR |
| 625 | xor eax, eax |
624 | xor eax, eax |
| 626 | inc eax |
625 | inc eax |
| 627 | out dx, eax |
626 | out dx, eax |
| 628 | 627 | ||
| 629 | call init_ring |
628 | call init_ring |
| - | 629 | test eax, eax |
|
| - | 630 | jnz .err |
|
| 630 | 631 | ||
| 631 | ; Initialize other registers. |
632 | ; Initialize other registers. |
| 632 | ; Configure the PCI bus bursts and FIFO thresholds. |
633 | ; Configure the PCI bus bursts and FIFO thresholds. |
| 633 | mov [ebx + device.bcrvalue], 0x10 ; little-endian, 8 burst length |
634 | mov [ebx + device.bcrvalue], 0x10 ; little-endian, 8 burst length |
| 634 | mov [ebx + device.crvalue], 0xa00 ; 128 burst length |
635 | mov [ebx + device.crvalue], 0xa00 ; 128 burst length |
| 635 | 636 | ||
| 636 | cmp [ebx + device.dev_id], 0x891 |
637 | cmp [ebx + device.dev_id], 0x891 |
| 637 | jne @f |
638 | jne @f |
| 638 | or [ebx + device.bcrvalue], 0x200 ; set PROG bit |
639 | or [ebx + device.bcrvalue], 0x200 ; set PROG bit |
| 639 | or [ebx + device.crvalue], 0x02000000 ; set enhanced bit |
640 | or [ebx + device.crvalue], 0x02000000 ; set enhanced bit |
| 640 | @@: |
641 | @@: |
| 641 | or [ebx + device.crvalue], RxEnable + TxThreshold + TxEnable |
642 | or [ebx + device.crvalue], RxEnable + TxThreshold + TxEnable |
| 642 | 643 | ||
| 643 | call set_rx_mode |
644 | call set_rx_mode |
| 644 | 645 | ||
| 645 | set_io [ebx + device.io_addr], 0 |
646 | set_io [ebx + device.io_addr], 0 |
| 646 | set_io [ebx + device.io_addr], BCR |
647 | set_io [ebx + device.io_addr], BCR |
| 647 | mov eax, [ebx + device.bcrvalue] |
648 | mov eax, [ebx + device.bcrvalue] |
| 648 | out dx, eax |
649 | out dx, eax |
| 649 | 650 | ||
| 650 | set_io [ebx + device.io_addr], TCRRCR |
651 | set_io [ebx + device.io_addr], TCRRCR |
| 651 | mov eax, [ebx + device.crvalue] |
652 | mov eax, [ebx + device.crvalue] |
| 652 | out dx, eax |
653 | out dx, eax |
| 653 | 654 | ||
| 654 | call getlinkstatus |
655 | call getlinkstatus |
| 655 | 656 | ||
| 656 | ; Restart Rx engine if stopped. |
657 | ; Restart Rx engine if stopped. |
| 657 | set_io [ebx + device.io_addr], 0 |
658 | set_io [ebx + device.io_addr], 0 |
| 658 | set_io [ebx + device.io_addr], RXPDR |
659 | set_io [ebx + device.io_addr], RXPDR |
| 659 | xor eax, eax |
660 | xor eax, eax |
| 660 | out dx, eax |
661 | out dx, eax |
| 661 | 662 | ||
| 662 | ; Enable interrupts |
663 | ; Enable interrupts |
| 663 | set_io [ebx + device.io_addr], ISR |
664 | set_io [ebx + device.io_addr], ISR |
| 664 | mov eax, FBE or TUNF or CNTOVF or RBU or TI or RI |
665 | mov eax, FBE or TUNF or CNTOVF or RBU or TI or RI |
| 665 | out dx, eax |
666 | out dx, eax |
| 666 | set_io [ebx + device.io_addr], IMR |
667 | set_io [ebx + device.io_addr], IMR |
| 667 | out dx, eax |
668 | out dx, eax |
| 668 | 669 | ||
| 669 | ; clear packet/byte counters |
670 | ; clear packet/byte counters |
| 670 | xor eax, eax |
671 | xor eax, eax |
| 671 | lea edi, [ebx + device.bytes_tx] |
672 | lea edi, [ebx + device.bytes_tx] |
| 672 | mov ecx, 6 |
673 | mov ecx, 6 |
| 673 | rep stosd |
674 | rep stosd |
| 674 | 675 | ||
| 675 | mov [ebx + device.mtu], 1514 |
676 | mov [ebx + device.mtu], 1514 |
| 676 | xor eax, eax |
677 | xor eax, eax |
| 677 | ret |
678 | ret |
| - | 679 | ||
| - | 680 | .err: |
|
| - | 681 | DEBUGF 2, "Error!\n" |
|
| - | 682 | or eax, -1 |
|
| - | 683 | ret |
|
| 678 | 684 | ||
| 679 | 685 | ||
| 680 | 686 | ||
| 681 | 687 | ||
| 682 | align 4 |
688 | align 4 |
| 683 | init_ring: |
689 | init_ring: |
| 684 | 690 | ||
| 685 | DEBUGF 1,"initializing rx and tx ring\n" |
691 | DEBUGF 1, "initializing rx and tx ring\n" |
| 686 | 692 | ||
| 687 | ; Initialize all Rx descriptors |
693 | ; Initialize all Rx descriptors |
| 688 | lea esi, [ebx + device.rx_desc] |
694 | lea esi, [ebx + device.rx_desc] |
| 689 | mov [ebx + device.cur_rx], esi |
695 | mov [ebx + device.cur_rx], esi |
| 690 | mov ecx, NUM_RX_DESC |
696 | mov ecx, NUM_RX_DESC |
| 691 | .rx_desc_loop: |
697 | .rx_desc_loop: |
| 692 | mov [esi + descriptor.status], RXOWN |
698 | mov [esi + descriptor.status], RXOWN |
| 693 | mov [esi + descriptor.control], 1536 shl RBSShift |
699 | mov [esi + descriptor.control], 1514 shl RBSShift |
| 694 | 700 | ||
| 695 | lea eax, [esi + sizeof.descriptor] |
701 | lea eax, [esi + sizeof.descriptor] |
| 696 | mov [esi + descriptor.next_desc_logical], eax |
702 | mov [esi + descriptor.next_desc_logical], eax |
| 697 | push ecx esi |
703 | push ecx esi |
| 698 | invoke GetPhysAddr |
704 | invoke GetPhysAddr |
| 699 | mov [esi + descriptor.next_desc], eax |
705 | mov [esi + descriptor.next_desc], eax |
| 700 | 706 | ||
| 701 | invoke KernelAlloc, 1536 |
707 | invoke NetAlloc, 1514+NET_BUFF.data |
| - | 708 | pop esi ecx |
|
| - | 709 | test eax, eax |
|
| 702 | pop esi |
710 | jz .out_of_mem |
| 703 | push esi |
711 | push ecx esi |
| 704 | mov [esi + descriptor.skbuff], eax |
712 | mov [esi + descriptor.skbuff], eax |
| - | 713 | invoke GetPgAddr |
|
| 705 | invoke GetPgAddr |
714 | add eax, NET_BUFF.data |
| 706 | pop esi ecx |
715 | pop esi ecx |
| 707 | mov [esi + descriptor.buffer], eax |
716 | mov [esi + descriptor.buffer], eax |
| 708 | 717 | ||
| 709 | add esi, sizeof.descriptor |
718 | add esi, sizeof.descriptor |
| 710 | loop .rx_desc_loop |
719 | loop .rx_desc_loop |
| 711 | 720 | ||
| 712 | ; Mark the last entry as wrapping the ring. |
721 | ; Mark the last entry as wrapping the ring. |
| 713 | lea eax, [ebx + device.rx_desc] |
722 | lea eax, [ebx + device.rx_desc] |
| 714 | mov [esi - sizeof.descriptor + descriptor.next_desc_logical], eax |
723 | mov [esi - sizeof.descriptor + descriptor.next_desc_logical], eax |
| 715 | push esi |
724 | push esi |
| 716 | invoke GetPhysAddr |
725 | invoke GetPhysAddr |
| 717 | pop esi |
726 | pop esi |
| 718 | mov [esi - sizeof.descriptor + descriptor.next_desc], eax |
727 | mov [esi - sizeof.descriptor + descriptor.next_desc], eax |
| 719 | 728 | ||
| 720 | set_io [ebx + device.io_addr], 0 |
729 | set_io [ebx + device.io_addr], 0 |
| 721 | set_io [ebx + device.io_addr], RXLBA |
730 | set_io [ebx + device.io_addr], RXLBA |
| 722 | out dx, eax |
731 | out dx, eax |
| 723 | 732 | ||
| 724 | ; Initialize all Tx descriptors |
733 | ; Initialize all Tx descriptors |
| 725 | lea esi, [ebx + device.tx_desc] |
734 | lea esi, [ebx + device.tx_desc] |
| 726 | mov [ebx + device.cur_tx], esi |
735 | mov [ebx + device.cur_tx], esi |
| 727 | mov ecx, NUM_TX_DESC |
736 | mov ecx, NUM_TX_DESC |
| 728 | .tx_desc_loop: |
737 | .tx_desc_loop: |
| 729 | mov [esi + descriptor.status], 0 |
738 | mov [esi + descriptor.status], 0 |
| 730 | 739 | ||
| 731 | lea eax, [esi + sizeof.descriptor] |
740 | lea eax, [esi + sizeof.descriptor] |
| 732 | mov [esi + descriptor.next_desc_logical], eax |
741 | mov [esi + descriptor.next_desc_logical], eax |
| 733 | push ecx esi |
742 | push ecx esi |
| 734 | invoke GetPhysAddr |
743 | invoke GetPhysAddr |
| 735 | pop esi ecx |
744 | pop esi ecx |
| 736 | mov [esi + descriptor.next_desc], eax |
745 | mov [esi + descriptor.next_desc], eax |
| 737 | mov [esi + descriptor.skbuff], 0 |
746 | mov [esi + descriptor.skbuff], 0 |
| 738 | add esi, sizeof.descriptor |
747 | add esi, sizeof.descriptor |
| 739 | loop .tx_desc_loop |
748 | loop .tx_desc_loop |
| 740 | 749 | ||
| 741 | ; Mark the last entry as wrapping the ring. |
750 | ; Mark the last entry as wrapping the ring. |
| 742 | lea eax, [ebx + device.tx_desc] |
751 | lea eax, [ebx + device.tx_desc] |
| 743 | mov [esi - sizeof.descriptor + descriptor.next_desc_logical], eax |
752 | mov [esi - sizeof.descriptor + descriptor.next_desc_logical], eax |
| 744 | push esi |
753 | push esi |
| 745 | invoke GetPhysAddr |
754 | invoke GetPhysAddr |
| 746 | pop esi |
755 | pop esi |
| 747 | mov [esi - sizeof.descriptor + descriptor.next_desc], eax |
756 | mov [esi - sizeof.descriptor + descriptor.next_desc], eax |
| 748 | 757 | ||
| 749 | set_io [ebx + device.io_addr], 0 |
758 | set_io [ebx + device.io_addr], 0 |
| 750 | set_io [ebx + device.io_addr], TXLBA |
759 | set_io [ebx + device.io_addr], TXLBA |
| 751 | out dx, eax |
760 | out dx, eax |
| - | 761 | ||
| - | 762 | xor eax, eax |
|
| - | 763 | ret |
|
| - | 764 | ||
| - | 765 | .out_of_mem: |
|
| 752 | 766 | or eax, -1 |
|
| 753 | ret |
767 | ret |
| 754 | 768 | ||
| 755 | 769 | ||
| 756 | align 4 |
770 | align 4 |
| 757 | set_rx_mode: |
771 | set_rx_mode: |
| 758 | 772 | ||
| 759 | DEBUGF 1,"Setting RX mode\n" |
773 | DEBUGF 1,"Setting RX mode\n" |
| 760 | 774 | ||
| 761 | ; Too many to match, or accept all multicasts. |
775 | ; Too many to match, or accept all multicasts. |
| 762 | set_io [ebx + device.io_addr], 0 |
776 | set_io [ebx + device.io_addr], 0 |
| 763 | set_io [ebx + device.io_addr], MAR0 |
777 | set_io [ebx + device.io_addr], MAR0 |
| 764 | xor eax, eax |
778 | xor eax, eax |
| 765 | not eax |
779 | not eax |
| 766 | out dx, eax |
780 | out dx, eax |
| 767 | set_io [ebx + device.io_addr], MAR1 |
781 | set_io [ebx + device.io_addr], MAR1 |
| 768 | out dx, eax |
782 | out dx, eax |
| 769 | 783 | ||
| 770 | and [ebx + device.crvalue], not (RxModeMask) |
784 | and [ebx + device.crvalue], not (RxModeMask) |
| 771 | or [ebx + device.crvalue], AcceptBroadcast + AcceptMulticast + AcceptMyPhys |
785 | or [ebx + device.crvalue], AcceptBroadcast + AcceptMulticast + AcceptMyPhys |
| 772 | 786 | ||
| 773 | ret |
787 | ret |
| 774 | 788 | ||
| 775 | 789 | ||
| 776 | align 4 |
790 | align 4 |
| 777 | getlinkstatus: |
791 | getlinkstatus: |
| 778 | 792 | ||
| 779 | DEBUGF 1,"Getting link status\n" |
793 | DEBUGF 1,"Getting link status\n" |
| 780 | 794 | ||
| 781 | mov [ebx + device.state], ETH_LINK_DOWN ; assume link is dead |
795 | mov [ebx + device.state], ETH_LINK_DOWN ; assume link is dead |
| 782 | 796 | ||
| 783 | cmp [ebx + device.PHYType], MysonPHY |
797 | cmp [ebx + device.PHYType], MysonPHY |
| 784 | jne .no_myson_phy |
798 | jne .no_myson_phy |
| 785 | set_io [ebx + device.io_addr], 0 |
799 | set_io [ebx + device.io_addr], 0 |
| 786 | set_io [ebx + device.io_addr], BMCRSR |
800 | set_io [ebx + device.io_addr], BMCRSR |
| 787 | in eax, dx |
801 | in eax, dx |
| 788 | test eax, LinkIsUp2 |
802 | test eax, LinkIsUp2 |
| 789 | jnz getlinktype |
803 | jnz getlinktype |
| 790 | ret |
804 | ret |
| 791 | 805 | ||
| 792 | .no_myson_phy: |
806 | .no_myson_phy: |
| 793 | set_io [ebx + device.io_addr], 0 |
807 | set_io [ebx + device.io_addr], 0 |
| 794 | set_io [ebx + device.io_addr], BMCRSR |
808 | set_io [ebx + device.io_addr], BMCRSR |
| 795 | in eax, dx |
809 | in eax, dx |
| 796 | test eax, LinkIsUp |
810 | test eax, LinkIsUp |
| 797 | jnz getlinktype |
811 | jnz getlinktype |
| 798 | ret |
812 | ret |
| 799 | 813 | ||
| 800 | getlinktype: |
814 | getlinktype: |
| 801 | 815 | ||
| 802 | DEBUGF 1,"Getting link type\n" |
816 | DEBUGF 1,"Getting link type\n" |
| 803 | cmp [ebx + device.PHYType], MysonPHY |
817 | cmp [ebx + device.PHYType], MysonPHY |
| 804 | jne .no_myson_phy |
818 | jne .no_myson_phy |
| 805 | 819 | ||
| 806 | DEBUGF 1,"myson PHY\n" |
820 | DEBUGF 1,"myson PHY\n" |
| 807 | set_io [ebx + device.io_addr], 0 |
821 | set_io [ebx + device.io_addr], 0 |
| 808 | set_io [ebx + device.io_addr], TCRRCR |
822 | set_io [ebx + device.io_addr], TCRRCR |
| 809 | in eax, dx |
823 | in eax, dx |
| 810 | test eax, FD |
824 | test eax, FD |
| 811 | jz @f |
825 | jz @f |
| 812 | DEBUGF 1,"full duplex\n" |
826 | DEBUGF 1,"full duplex\n" |
| 813 | or [ebx + device.state], ETH_LINK_FD |
827 | or [ebx + device.state], ETH_LINK_FD |
| 814 | @@: |
828 | @@: |
| 815 | test eax, PS10 |
829 | test eax, PS10 |
| 816 | jnz @f |
830 | jnz @f |
| 817 | DEBUGF 1,"100mbit\n" |
831 | DEBUGF 1,"100mbit\n" |
| 818 | or [ebx + device.state], ETH_LINK_100M |
832 | or [ebx + device.state], ETH_LINK_100M |
| 819 | ret |
833 | ret |
| 820 | @@: |
834 | @@: |
| 821 | DEBUGF 1,"10mbit\n" |
835 | DEBUGF 1,"10mbit\n" |
| 822 | or [ebx + device.state], ETH_LINK_10M |
836 | or [ebx + device.state], ETH_LINK_10M |
| 823 | ret |
837 | ret |
| 824 | 838 | ||
| 825 | .no_myson_phy: |
839 | .no_myson_phy: |
| 826 | DEBUGF 1,"not a myson PHY\n" |
840 | DEBUGF 1,"not a myson PHY\n" |
| 827 | mov [ebx + device.state], ETH_LINK_UNKNOWN |
841 | mov [ebx + device.state], ETH_LINK_UNKNOWN |
| 828 | 842 | ||
| 829 | ; if (mtdx.PHYType equ= SeeqPHY) { /* this PHY is SEEQ 80225 */ |
843 | ; if (mtdx.PHYType equ= SeeqPHY) { /* this PHY is SEEQ 80225 */ |
| 830 | ; unsigned int data; |
844 | ; unsigned int data; |
| 831 | ; |
845 | ; |
| 832 | ; data = mdio_read(dev, mtdx.phys[0], MIIRegister18); |
846 | ; data = mdio_read(dev, mtdx.phys[0], MIIRegister18); |
| 833 | ; if (data & SPD_DET_100) |
847 | ; if (data & SPD_DET_100) |
| 834 | ; mtdx.line_speed = 2; /* 100M */ |
848 | ; mtdx.line_speed = 2; /* 100M */ |
| 835 | ; else |
849 | ; else |
| 836 | ; mtdx.line_speed = 1; /* 10M */ |
850 | ; mtdx.line_speed = 1; /* 10M */ |
| 837 | ; if (data & DPLX_DET_FULL) |
851 | ; if (data & DPLX_DET_FULL) |
| 838 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
852 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
| 839 | ; else |
853 | ; else |
| 840 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
854 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
| 841 | ; } else if (mtdx.PHYType equ= AhdocPHY) { |
855 | ; } else if (mtdx.PHYType equ= AhdocPHY) { |
| 842 | ; unsigned int data; |
856 | ; unsigned int data; |
| 843 | ; |
857 | ; |
| 844 | ; data = mdio_read(dev, mtdx.phys[0], DiagnosticReg); |
858 | ; data = mdio_read(dev, mtdx.phys[0], DiagnosticReg); |
| 845 | ; if (data & Speed_100) |
859 | ; if (data & Speed_100) |
| 846 | ; mtdx.line_speed = 2; /* 100M */ |
860 | ; mtdx.line_speed = 2; /* 100M */ |
| 847 | ; else |
861 | ; else |
| 848 | ; mtdx.line_speed = 1; /* 10M */ |
862 | ; mtdx.line_speed = 1; /* 10M */ |
| 849 | ; if (data & DPLX_FULL) |
863 | ; if (data & DPLX_FULL) |
| 850 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
864 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
| 851 | ; else |
865 | ; else |
| 852 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
866 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
| 853 | ; } |
867 | ; } |
| 854 | ; else if (mtdx.PHYType equ= MarvellPHY) { |
868 | ; else if (mtdx.PHYType equ= MarvellPHY) { |
| 855 | ; unsigned int data; |
869 | ; unsigned int data; |
| 856 | ; |
870 | ; |
| 857 | ; data = mdio_read(dev, mtdx.phys[0], SpecificReg); |
871 | ; data = mdio_read(dev, mtdx.phys[0], SpecificReg); |
| 858 | ; if (data & Full_Duplex) |
872 | ; if (data & Full_Duplex) |
| 859 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
873 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
| 860 | ; else |
874 | ; else |
| 861 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
875 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
| 862 | ; data &= SpeedMask; |
876 | ; data &= SpeedMask; |
| 863 | ; if (data equ= Speed_1000M) |
877 | ; if (data equ= Speed_1000M) |
| 864 | ; mtdx.line_speed = 3; /* 1000M */ |
878 | ; mtdx.line_speed = 3; /* 1000M */ |
| 865 | ; else if (data equ= Speed_100M) |
879 | ; else if (data equ= Speed_100M) |
| 866 | ; mtdx.line_speed = 2; /* 100M */ |
880 | ; mtdx.line_speed = 2; /* 100M */ |
| 867 | ; else |
881 | ; else |
| 868 | ; mtdx.line_speed = 1; /* 10M */ |
882 | ; mtdx.line_speed = 1; /* 10M */ |
| 869 | ; } |
883 | ; } |
| 870 | ; else if (mtdx.PHYType equ= Myson981) { |
884 | ; else if (mtdx.PHYType equ= Myson981) { |
| 871 | ; unsigned int data; |
885 | ; unsigned int data; |
| 872 | ; |
886 | ; |
| 873 | ; data = mdio_read(dev, mtdx.phys[0], StatusRegister); |
887 | ; data = mdio_read(dev, mtdx.phys[0], StatusRegister); |
| 874 | ; |
888 | ; |
| 875 | ; if (data & SPEED100) |
889 | ; if (data & SPEED100) |
| 876 | ; mtdx.line_speed = 2; |
890 | ; mtdx.line_speed = 2; |
| 877 | ; else |
891 | ; else |
| 878 | ; mtdx.line_speed = 1; |
892 | ; mtdx.line_speed = 1; |
| 879 | ; |
893 | ; |
| 880 | ; if (data & FULLMODE) |
894 | ; if (data & FULLMODE) |
| 881 | ; mtdx.duplexmode = 2; |
895 | ; mtdx.duplexmode = 2; |
| 882 | ; else |
896 | ; else |
| 883 | ; mtdx.duplexmode = 1; |
897 | ; mtdx.duplexmode = 1; |
| 884 | ; } |
898 | ; } |
| 885 | ; else if (mtdx.PHYType equ= LevelOnePHY) { |
899 | ; else if (mtdx.PHYType equ= LevelOnePHY) { |
| 886 | ; unsigned int data; |
900 | ; unsigned int data; |
| 887 | ; |
901 | ; |
| 888 | ; data = mdio_read(dev, mtdx.phys[0], SpecificReg); |
902 | ; data = mdio_read(dev, mtdx.phys[0], SpecificReg); |
| 889 | ; if (data & LXT1000_Full) |
903 | ; if (data & LXT1000_Full) |
| 890 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
904 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
| 891 | ; else |
905 | ; else |
| 892 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
906 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
| 893 | ; data &= SpeedMask; |
907 | ; data &= SpeedMask; |
| 894 | ; if (data equ= LXT1000_1000M) |
908 | ; if (data equ= LXT1000_1000M) |
| 895 | ; mtdx.line_speed = 3; /* 1000M */ |
909 | ; mtdx.line_speed = 3; /* 1000M */ |
| 896 | ; else if (data equ= LXT1000_100M) |
910 | ; else if (data equ= LXT1000_100M) |
| 897 | ; mtdx.line_speed = 2; /* 100M */ |
911 | ; mtdx.line_speed = 2; /* 100M */ |
| 898 | ; else |
912 | ; else |
| 899 | ; mtdx.line_speed = 1; /* 10M */ |
913 | ; mtdx.line_speed = 1; /* 10M */ |
| 900 | ; } |
914 | ; } |
| 901 | 915 | ||
| 902 | ; // chage crvalue |
916 | ; // chage crvalue |
| 903 | ; // mtdx.crvalue&equ(~PS10)&(~FD); |
917 | ; // mtdx.crvalue&equ(~PS10)&(~FD); |
| 904 | ; mtdx.crvalue &= (~PS10) & (~FD) & (~PS1000); |
918 | ; mtdx.crvalue &= (~PS10) & (~FD) & (~PS1000); |
| 905 | ; if (mtdx.line_speed equ= 1) |
919 | ; if (mtdx.line_speed equ= 1) |
| 906 | ; mtdx.crvalue |= PS10; |
920 | ; mtdx.crvalue |= PS10; |
| 907 | ; else if (mtdx.line_speed equ= 3) |
921 | ; else if (mtdx.line_speed equ= 3) |
| 908 | ; mtdx.crvalue |= PS1000; |
922 | ; mtdx.crvalue |= PS1000; |
| 909 | ; if (mtdx.duplexmode equ= 2) |
923 | ; if (mtdx.duplexmode equ= 2) |
| 910 | ; mtdx.crvalue |= FD; |
924 | ; mtdx.crvalue |= FD; |
| 911 | 925 | ||
| 912 | ret |
926 | ret |
| 913 | 927 | ||
| 914 | 928 | ||
| 915 | 929 | ||
| 916 | 930 | ||
| 917 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
931 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 918 | ;; ;; |
932 | ;; ;; |
| 919 | ;; Transmit ;; |
933 | ;; Transmit ;; |
| 920 | ;; ;; |
934 | ;; ;; |
| 921 | ;; In: buffer pointer in [esp+4] ;; |
935 | ;; In: buffer pointer in [esp+4] ;; |
| 922 | ;; size of buffer in [esp+8] ;; |
936 | ;; size of buffer in [esp+8] ;; |
| 923 | ;; pointer to device structure in ebx ;; |
937 | ;; pointer to device structure in ebx ;; |
| 924 | ;; ;; |
938 | ;; ;; |
| 925 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
939 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| 926 | 940 | ||
| 927 | proc transmit stdcall bufferptr, buffersize |
941 | proc transmit stdcall bufferptr |
| 928 | 942 | ||
| 929 | pushf |
943 | pushf |
| 930 | cli |
944 | cli |
| - | 945 | ||
| 931 | 946 | mov esi, [bufferptr] |
|
| 932 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize] |
947 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [esi + NET_BUFF.length] |
| 933 | mov eax, [bufferptr] |
948 | lea eax, [esi + NET_BUFF.data] |
| 934 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
949 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
| 935 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
950 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
| 936 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
951 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
| 937 | [eax+13]:2,[eax+12]:2 |
952 | [eax+13]:2,[eax+12]:2 |
| 938 | 953 | ||
| 939 | cmp [buffersize], 1514 |
954 | cmp [esi + NET_BUFF.length], 1514 |
| 940 | ja .fail |
955 | ja .fail |
| 941 | cmp [buffersize], 60 |
956 | cmp [esi + NET_BUFF.length], 60 |
| 942 | jb .fail |
957 | jb .fail |
| 943 | 958 | ||
| 944 | mov esi, [ebx + device.cur_tx] |
959 | mov esi, [ebx + device.cur_tx] |
| 945 | - | ||
| 946 | test [esi + descriptor.status], TXOWN |
960 | test [esi + descriptor.status], TXOWN |
| 947 | jnz .fail |
961 | jnz .fail |
| 948 | 962 | ||
| 949 | push [esi + descriptor.next_desc_logical] |
963 | push [esi + descriptor.next_desc_logical] |
| 950 | pop [ebx + device.cur_tx] |
964 | pop [ebx + device.cur_tx] |
| 951 | 965 | ||
| 952 | mov eax, [bufferptr] |
966 | mov eax, [bufferptr] |
| 953 | mov [esi + descriptor.skbuff], eax |
967 | mov [esi + descriptor.skbuff], eax |
| - | 968 | add eax, [eax + NET_BUFF.offset] |
|
| 954 | invoke GetPhysAddr |
969 | invoke GetPhysAddr |
| 955 | mov [esi + descriptor.buffer], eax |
970 | mov [esi + descriptor.buffer], eax |
| 956 | 971 | ||
| - | 972 | mov eax, [bufferptr] |
|
| 957 | mov eax, [buffersize] |
973 | mov eax, [eax + NET_BUFF.length] |
| 958 | mov ecx, eax |
974 | mov ecx, eax |
| 959 | shl eax, PKTSShift ; packet size |
975 | shl eax, PKTSShift ; packet size |
| 960 | shl ecx, TBSShift |
976 | shl ecx, TBSShift |
| 961 | or eax, ecx |
977 | or eax, ecx |
| 962 | or eax, TXIC + TXLD + TXFD + CRCEnable + PADEnable |
978 | or eax, TXIC + TXLD + TXFD + CRCEnable + PADEnable |
| 963 | mov [esi + descriptor.control], eax |
979 | mov [esi + descriptor.control], eax |
| 964 | mov [esi + descriptor.status], TXOWN |
980 | mov [esi + descriptor.status], TXOWN |
| 965 | 981 | ||
| 966 | ; Update stats |
982 | ; Update stats |
| 967 | inc [ebx + device.packets_tx] |
983 | inc [ebx + device.packets_tx] |
| 968 | mov eax, [buffersize] |
984 | mov eax, [bufferptr] |
| - | 985 | mov ecx, [eax + NET_BUFF.length] |
|
| 969 | add dword[ebx + device.bytes_tx], eax |
986 | add dword[ebx + device.bytes_tx], ecx |
| 970 | adc dword[ebx + device.bytes_tx + 4], 0 |
987 | adc dword[ebx + device.bytes_tx + 4], 0 |
| 971 | 988 | ||
| 972 | ; TX Poll |
989 | ; TX Poll |
| 973 | set_io [ebx + device.io_addr], 0 |
990 | set_io [ebx + device.io_addr], 0 |
| 974 | set_io [ebx + device.io_addr], TXPDR |
991 | set_io [ebx + device.io_addr], TXPDR |
| 975 | xor eax, eax |
992 | xor eax, eax |
| 976 | out dx, eax |
993 | out dx, eax |
| 977 | 994 | ||
| 978 | DEBUGF 1,"Transmit OK\n" |
995 | DEBUGF 1,"Transmit OK\n" |
| 979 | popf |
996 | popf |
| 980 | xor eax, eax |
997 | xor eax, eax |
| 981 | ret |
998 | ret |
| 982 | 999 | ||
| 983 | .fail: |
1000 | .fail: |
| 984 | DEBUGF 2,"Transmit failed\n" |
1001 | DEBUGF 2,"Transmit failed\n" |
| 985 | invoke KernelFree, [bufferptr] |
1002 | invoke NetFree, [bufferptr] |
| 986 | popf |
1003 | popf |
| 987 | or eax, -1 |
1004 | or eax, -1 |
| 988 | ret |
1005 | ret |
| 989 | 1006 | ||
| 990 | endp |
1007 | endp |
| 991 | 1008 | ||
| 992 | 1009 | ||
| 993 | 1010 | ||
| 994 | align 4 |
1011 | align 4 |
| 995 | read_mac: |
1012 | read_mac: |
| 996 | 1013 | ||
| 997 | set_io [ebx + device.io_addr], 0 |
1014 | set_io [ebx + device.io_addr], 0 |
| 998 | set_io [ebx + device.io_addr], PAR0 |
1015 | set_io [ebx + device.io_addr], PAR0 |
| 999 | lea edi, [ebx + device.mac] |
1016 | lea edi, [ebx + device.mac] |
| 1000 | insd |
1017 | insd |
| 1001 | set_io [ebx + device.io_addr], PAR1 |
1018 | set_io [ebx + device.io_addr], PAR1 |
| 1002 | insw |
1019 | insw |
| 1003 | DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\ |
1020 | DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\ |
| 1004 | [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2 |
1021 | [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2 |
| 1005 | 1022 | ||
| 1006 | ret |
1023 | ret |
| 1007 | 1024 | ||
| 1008 | align 4 |
1025 | align 4 |
| 1009 | write_mac: |
1026 | write_mac: |
| 1010 | 1027 | ||
| 1011 | ret |
1028 | ret |
| 1012 | 1029 | ||
| 1013 | 1030 | ||
| 1014 | 1031 | ||
| 1015 | ;;;;;;;;;;;;;;;;;;;;;;; |
1032 | ;;;;;;;;;;;;;;;;;;;;;;; |
| 1016 | ;; ;; |
1033 | ;; ;; |
| 1017 | ;; Interrupt handler ;; |
1034 | ;; Interrupt handler ;; |
| 1018 | ;; ;; |
1035 | ;; ;; |
| 1019 | ;;;;;;;;;;;;;;;;;;;;;;; |
1036 | ;;;;;;;;;;;;;;;;;;;;;;; |
| 1020 | 1037 | ||
| 1021 | align 4 |
1038 | align 4 |
| 1022 | int_handler: |
1039 | int_handler: |
| 1023 | 1040 | ||
| 1024 | push ebx esi edi |
1041 | push ebx esi edi |
| 1025 | 1042 | ||
| 1026 | DEBUGF 1,"INT\n" |
1043 | DEBUGF 1,"INT\n" |
| 1027 | 1044 | ||
| 1028 | ; find pointer of device wich made IRQ occur |
1045 | ; find pointer of device wich made IRQ occur |
| 1029 | 1046 | ||
| 1030 | mov ecx, [devices] |
1047 | mov ecx, [devices] |
| 1031 | test ecx, ecx |
1048 | test ecx, ecx |
| 1032 | jz .nothing |
1049 | jz .nothing |
| 1033 | mov esi, device_list |
1050 | mov esi, device_list |
| 1034 | .nextdevice: |
1051 | .nextdevice: |
| 1035 | mov ebx, [esi] |
1052 | mov ebx, [esi] |
| 1036 | 1053 | ||
| 1037 | set_io [ebx + device.io_addr], 0 |
1054 | set_io [ebx + device.io_addr], 0 |
| 1038 | set_io [ebx + device.io_addr], ISR |
1055 | set_io [ebx + device.io_addr], ISR |
| 1039 | in eax, dx |
1056 | in eax, dx |
| 1040 | out dx, eax ; send it back to ACK |
1057 | out dx, eax ; send it back to ACK |
| 1041 | test eax, eax |
1058 | test eax, eax |
| 1042 | jnz .got_it |
1059 | jnz .got_it |
| 1043 | .continue: |
1060 | .continue: |
| 1044 | add esi, 4 |
1061 | add esi, 4 |
| 1045 | dec ecx |
1062 | dec ecx |
| 1046 | jnz .nextdevice |
1063 | jnz .nextdevice |
| 1047 | .nothing: |
1064 | .nothing: |
| 1048 | pop edi esi ebx |
1065 | pop edi esi ebx |
| 1049 | xor eax, eax |
1066 | xor eax, eax |
| 1050 | 1067 | ||
| 1051 | ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) |
1068 | ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) |
| 1052 | 1069 | ||
| 1053 | .got_it: |
1070 | .got_it: |
| 1054 | 1071 | ||
| 1055 | DEBUGF 1,"Device: %x Status: %x\n", ebx, ax |
1072 | DEBUGF 1,"Device: %x Status: %x\n", ebx, ax |
| 1056 | 1073 | ||
| 1057 | test ax, RI ; receive interrupt |
1074 | test ax, RI ; receive interrupt |
| 1058 | jz .no_rx |
1075 | jz .no_rx |
| 1059 | push ax |
1076 | push ax |
| 1060 | .rx_loop: |
1077 | .rx_loop: |
| 1061 | mov esi, [ebx + device.cur_rx] |
1078 | mov esi, [ebx + device.cur_rx] |
| 1062 | test [esi + descriptor.status], RXOWN |
1079 | test [esi + descriptor.status], RXOWN |
| 1063 | jnz .rx_done |
1080 | jnz .rx_done |
| 1064 | 1081 | ||
| 1065 | push ebx |
1082 | push ebx |
| 1066 | push .rx_complete |
1083 | push .rx_complete |
| 1067 | 1084 | ||
| 1068 | mov ecx, [esi + descriptor.status] |
1085 | mov ecx, [esi + descriptor.status] |
| 1069 | shr ecx, FLNGShift |
1086 | shr ecx, FLNGShift |
| 1070 | sub ecx, 4 ; we dont need CRC |
1087 | sub ecx, 4 ; we dont need CRC |
| 1071 | push ecx |
- | |
| 1072 | DEBUGF 1,"Received %u bytes\n", ecx |
1088 | DEBUGF 1,"Received %u bytes\n", ecx |
| - | 1089 | mov eax, [esi + descriptor.skbuff] |
|
| - | 1090 | push eax |
|
| - | 1091 | mov [eax + NET_BUFF.length], ecx |
|
| - | 1092 | mov [eax + NET_BUFF.device], ebx |
|
| - | 1093 | mov [eax + NET_BUFF.offset], NET_BUFF.data |
|
| 1073 | 1094 | ||
| 1074 | ; Update stats |
1095 | ; Update stats |
| 1075 | add dword[ebx + device.bytes_rx], ecx |
1096 | add dword[ebx + device.bytes_rx], ecx |
| 1076 | adc dword[ebx + device.bytes_rx + 4], 0 |
1097 | adc dword[ebx + device.bytes_rx + 4], 0 |
| 1077 | inc [ebx + device.packets_rx] |
1098 | inc [ebx + device.packets_rx] |
| 1078 | - | ||
| 1079 | push [esi + descriptor.skbuff] |
1099 | |
| 1080 | jmp [Eth_input] |
1100 | jmp [EthInput] |
| 1081 | 1101 | ||
| 1082 | .rx_complete: |
1102 | .rx_complete: |
| 1083 | pop ebx |
1103 | pop ebx |
| 1084 | mov esi, [ebx + device.cur_rx] |
1104 | mov esi, [ebx + device.cur_rx] |
| 1085 | mov [esi + descriptor.control], 1536 shl RBSShift |
1105 | mov [esi + descriptor.control], 1514 shl RBSShift |
| 1086 | push esi |
1106 | push esi |
| 1087 | invoke KernelAlloc, 1536 |
1107 | invoke NetAlloc, 1514+NET_BUFF.data |
| 1088 | pop esi |
1108 | pop esi |
| - | 1109 | ; test eax, eax |
|
| - | 1110 | ; jz .rx_loop |
|
| 1089 | mov [esi + descriptor.skbuff], eax |
1111 | mov [esi + descriptor.skbuff], eax |
| 1090 | invoke GetPgAddr |
1112 | invoke GetPhysAddr |
| - | 1113 | add eax, NET_BUFF.data |
|
| 1091 | mov [esi + descriptor.buffer], eax |
1114 | mov [esi + descriptor.buffer], eax |
| 1092 | mov [esi + descriptor.status], RXOWN |
1115 | mov [esi + descriptor.status], RXOWN |
| 1093 | 1116 | ||
| 1094 | push [esi + descriptor.next_desc_logical] |
1117 | push [esi + descriptor.next_desc_logical] |
| 1095 | pop [ebx + device.cur_rx] |
1118 | pop [ebx + device.cur_rx] |
| 1096 | 1119 | ||
| 1097 | jmp .rx_loop |
1120 | jmp .rx_loop |
| 1098 | 1121 | ||
| 1099 | .rx_done: |
1122 | .rx_done: |
| 1100 | DEBUGF 1,"RX done\n" |
1123 | DEBUGF 1,"RX done\n" |
| 1101 | 1124 | ||
| 1102 | ; Restart Rx engine if stopped. |
1125 | ; Restart Rx engine if stopped. |
| 1103 | set_io [ebx + device.io_addr], 0 |
1126 | set_io [ebx + device.io_addr], 0 |
| 1104 | set_io [ebx + device.io_addr], RXPDR |
1127 | set_io [ebx + device.io_addr], RXPDR |
| 1105 | xor eax, eax |
1128 | xor eax, eax |
| 1106 | out dx, eax |
1129 | out dx, eax |
| 1107 | 1130 | ||
| 1108 | pop ax |
1131 | pop ax |
| 1109 | .no_rx: |
1132 | .no_rx: |
| 1110 | 1133 | ||
| 1111 | test ax, TI ; transmit interrupt |
1134 | test ax, TI ; transmit interrupt |
| 1112 | jz .no_tx |
1135 | jz .no_tx |
| 1113 | DEBUGF 1,"TX\n" |
1136 | DEBUGF 1,"TX\n" |
| 1114 | push ax |
1137 | push ax |
| 1115 | lea esi, [ebx + device.tx_desc] |
1138 | lea esi, [ebx + device.tx_desc] |
| 1116 | mov ecx, NUM_TX_DESC |
1139 | mov ecx, NUM_TX_DESC |
| 1117 | .tx_loop: |
1140 | .tx_loop: |
| 1118 | test [esi + descriptor.status], TXOWN |
1141 | test [esi + descriptor.status], TXOWN |
| 1119 | jnz .skip_this_one |
1142 | jnz .skip_this_one |
| 1120 | mov eax, [esi + descriptor.skbuff] |
1143 | mov eax, [esi + descriptor.skbuff] |
| 1121 | test eax, eax |
1144 | test eax, eax |
| 1122 | je .skip_this_one |
1145 | je .skip_this_one |
| 1123 | mov [esi + descriptor.skbuff], 0 |
1146 | mov [esi + descriptor.skbuff], 0 |
| 1124 | DEBUGF 1,"freeing buffer: 0x%x\n", eax |
1147 | DEBUGF 1,"freeing buffer: 0x%x\n", eax |
| 1125 | invoke KernelFree, eax |
1148 | invoke NetFree, eax |
| 1126 | .skip_this_one: |
1149 | .skip_this_one: |
| 1127 | mov esi, [esi + descriptor.next_desc_logical] |
1150 | mov esi, [esi + descriptor.next_desc_logical] |
| 1128 | loop .tx_loop |
1151 | loop .tx_loop |
| 1129 | pop ax |
1152 | pop ax |
| 1130 | .no_tx: |
1153 | .no_tx: |
| 1131 | 1154 | ||
| 1132 | test ax, LSCStatus |
1155 | test ax, LSCStatus |
| 1133 | jz .no_link_change |
1156 | jz .no_link_change |
| 1134 | push ax |
1157 | push ax |
| 1135 | call getlinkstatus |
1158 | call getlinkstatus |
| 1136 | pop ax |
1159 | pop ax |
| 1137 | .no_link_change: |
1160 | .no_link_change: |
| 1138 | 1161 | ||
| 1139 | ; test ax, TBU |
1162 | ; test ax, TBU |
| 1140 | ; jz .no_tbu |
1163 | ; jz .no_tbu |
| 1141 | ; DEBUGF 2,"Transmit buffer unavailable!\n" |
1164 | ; DEBUGF 2,"Transmit buffer unavailable!\n" |
| 1142 | ; .no_tbu: |
1165 | ; .no_tbu: |
| 1143 | 1166 | ||
| 1144 | .fail: |
1167 | .fail: |
| 1145 | pop edi esi ebx |
1168 | pop edi esi ebx |
| 1146 | xor eax, eax |
1169 | xor eax, eax |
| 1147 | inc eax |
1170 | inc eax |
| 1148 | 1171 | ||
| 1149 | ret |
1172 | ret |
| 1150 | 1173 | ||
| 1151 | 1174 | ||
| 1152 | ; End of code |
1175 | ; End of code |
| 1153 | 1176 | ||
| 1154 | 1177 | ||
| 1155 | data fixups |
1178 | data fixups |
| 1156 | end data |
1179 | end data |
| 1157 | 1180 | ||
| 1158 | include '../peimport.inc' |
1181 | include '../peimport.inc' |
| 1159 | 1182 | ||
| 1160 | my_service db 'MTD80X',0 ; max 16 chars include zero |
1183 | my_service db 'MTD80X',0 ; max 16 chars include zero |
| 1161 | 1184 | ||
| 1162 | sz_mtd800 db "Myson MTD800", 0 |
1185 | sz_mtd800 db "Myson MTD800", 0 |
| 1163 | sz_mtd803 db "Surecom EP-320X", 0 |
1186 | sz_mtd803 db "Surecom EP-320X", 0 |
| 1164 | sz_mtd891 db "Myson MTD891", 0 |
1187 | sz_mtd891 db "Myson MTD891", 0 |
| 1165 | 1188 | ||
| 1166 | 1189 | ||
| 1167 | include_debug_strings ; All data wich FDO uses will be included here |
1190 | include_debug_strings ; All data wich FDO uses will be included here |
| 1168 | 1191 | ||
| 1169 | align 4 |
1192 | align 4 |
| 1170 | devices dd 0 |
1193 | devices dd 0 |
| 1171 | device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling |
1194 | device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling |