Subversion Repositories Kolibri OS

* Vital statistics:

  Supported pointer/size_t representation:       4 or 8 bytes

       size_t MUST be an unsigned type of the same width as

       pointers. (If you are using an ancient system that declares

       size_t as a signed type, or need it to be a different width

       than pointers, you can use a previous release of this malloc

       (e.g. 2.7.2) supporting these.)

  Alignment:                                     8 bytes (default)

       This suffices for nearly all current machines and C compilers.

       However, you can define MALLOC_ALIGNMENT to be wider than this

       if necessary (up to 128bytes), at the expense of using more space.

  Minimum overhead per allocated chunk:   4 or  8 bytes (if 4byte sizes)

                                          8 or 16 bytes (if 8byte sizes)

       Each malloced chunk has a hidden word of overhead holding size

       and status information, and additional cross-check word

       if FOOTERS is defined.

  Minimum allocated size: 4-byte ptrs:  16 bytes    (including overhead)

                          8-byte ptrs:  32 bytes    (including overhead)

       Even a request for zero bytes (i.e., malloc(0)) returns a

       pointer to something of the minimum allocatable size.

       The maximum overhead wastage (i.e., number of extra bytes

       allocated than were requested in malloc) is less than or equal

       to the minimum size, except for requests >= mmap_threshold that

       are serviced via mmap(), where the worst case wastage is about

       32 bytes plus the remainder from a system page (the minimal

       mmap unit); typically 4096 or 8192 bytes.

  Security: static-safe; optionally more or less

       The "security" of malloc refers to the ability of malicious

       code to accentuate the effects of errors (for example, freeing

       space that is not currently malloc'ed or overwriting past the

       ends of chunks) in code that calls malloc.  This malloc

       guarantees not to modify any memory locations below the base of

       heap, i.e., static variables, even in the presence of usage

       errors.  The routines additionally detect most improper frees

       and reallocs.  All this holds as long as the static bookkeeping

       for malloc itself is not corrupted by some other means.  This

       is only one aspect of security -- these checks do not, and

       cannot, detect all possible programming errors.

       If FOOTERS is defined nonzero, then each allocated chunk

       carries an additional check word to verify that it was malloced

       from its space.  These check words are the same within each

       execution of a program using malloc, but differ across

       executions, so externally crafted fake chunks cannot be

       freed. This improves security by rejecting frees/reallocs that

       could corrupt heap memory, in addition to the checks preventing

       writes to statics that are always on.  This may further improve

       security at the expense of time and space overhead.  (Note that

       FOOTERS may also be worth using with MSPACES.)

       By default detected errors cause the program to abort (calling

       "abort()"). You can override this to instead proceed past

       errors by defining PROCEED_ON_ERROR.  In this case, a bad free

       has no effect, and a malloc that encounters a bad address

       caused by user overwrites will ignore the bad address by

       dropping pointers and indices to all known memory. This may

       be appropriate for programs that should continue if at all

       possible in the face of programming errors, although they may

       run out of memory because dropped memory is never reclaimed.

       If you don't like either of these options, you can define

       CORRUPTION_ERROR_ACTION and USAGE_ERROR_ACTION to do anything

       else. And if if you are sure that your program using malloc has

       no errors or vulnerabilities, you can define INSECURE to 1,

       which might (or might not) provide a small performance improvement.

  Thread-safety: NOT thread-safe unless USE_LOCKS defined

       When USE_LOCKS is defined, each public call to malloc, free,

       etc is surrounded with either a pthread mutex or a win32

       spinlock (depending on WIN32). This is not especially fast, and

       can be a major bottleneck.  It is designed only to provide

       minimal protection in concurrent environments, and to provide a

       basis for extensions.  If you are using malloc in a concurrent

       program, consider instead using ptmalloc, which is derived from

       a version of this malloc. (See http://www.malloc.de).

  System requirements: Any combination of MORECORE and/or MMAP/MUNMAP

       This malloc can use unix sbrk or any emulation (invoked using

       the CALL_MORECORE macro) and/or mmap/munmap or any emulation

       (invoked using CALL_MMAP/CALL_MUNMAP) to get and release system

       memory.  On most unix systems, it tends to work best if both

       MORECORE and MMAP are enabled.  On Win32, it uses emulations

       based on VirtualAlloc. It also uses common C library functions

       like memset.

  Compliance: I believe it is compliant with the Single Unix Specification

       (See http://www.unix.org). Also SVID/XPG, ANSI C, and probably

       others as well.

* Overview of algorithms

  This is not the fastest, most space-conserving, most portable, or

  most tunable malloc ever written. However it is among the fastest

  while also being among the most space-conserving, portable and

  tunable.  Consistent balance across these factors results in a good

  general-purpose allocator for malloc-intensive programs.

  In most ways, this malloc is a best-fit allocator. Generally, it

  chooses the best-fitting existing chunk for a request, with ties

  broken in approximately least-recently-used order. (This strategy

  normally maintains low fragmentation.) However, for requests less

  than 256bytes, it deviates from best-fit when there is not an

  exactly fitting available chunk by preferring to use space adjacent

  to that used for the previous small request, as well as by breaking

  ties in approximately most-recently-used order. (These enhance

  locality of series of small allocations.)  And for very large requests

  (>= 256Kb by default), it relies on system memory mapping

  facilities, if supported.  (This helps avoid carrying around and

  possibly fragmenting memory used only for large chunks.)

  All operations (except malloc_stats and mallinfo) have execution

  times that are bounded by a constant factor of the number of bits in

  a size_t, not counting any clearing in calloc or copying in realloc,

  or actions surrounding MORECORE and MMAP that have times

  proportional to the number of non-contiguous regions returned by

  system allocation routines, which is often just 1.

  The implementation is not very modular and seriously overuses

  macros. Perhaps someday all C compilers will do as good a job

  inlining modular code as can now be done by brute-force expansion,

  but now, enough of them seem not to.

  Some compilers issue a lot of warnings about code that is

  dead/unreachable only on some platforms, and also about intentional

  uses of negation on unsigned types. All known cases of each can be

  ignored.

  For a longer but out of date high-level description, see

     http://gee.cs.oswego.edu/dl/html/malloc.html

* MSPACES

  If MSPACES is defined, then in addition to malloc, free, etc.,

  this file also defines mspace_malloc, mspace_free, etc. These

  are versions of malloc routines that take an "mspace" argument

  obtained using create_mspace, to control all internal bookkeeping.

  If ONLY_MSPACES is defined, only these versions are compiled.

  So if you would like to use this allocator for only some allocations,

  and your system malloc for others, you can compile with

  ONLY_MSPACES and then do something like...

    static mspace mymspace = create_mspace(0,0); // for example

    #define mymalloc(bytes)  mspace_malloc(mymspace, bytes)

  (Note: If you only need one instance of an mspace, you can instead

  use "USE_DL_PREFIX" to relabel the global malloc.)

  You can similarly create thread-local allocators by storing

  mspaces as thread-locals. For example:

    static __thread mspace tlms = 0;

    void*  tlmalloc(size_t bytes) {

      if (tlms == 0) tlms = create_mspace(0, 0);

      return mspace_malloc(tlms, bytes);

    }

    void  tlfree(void* mem) { mspace_free(tlms, mem); }

  Unless FOOTERS is defined, each mspace is completely independent.

  You cannot allocate from one and free to another (although

  conformance is only weakly checked, so usage errors are not always

  caught). If FOOTERS is defined, then each chunk carries around a tag

  indicating its originating mspace, and frees are directed to their

  originating spaces.

 -------------------------  Compile-time options ---------------------------

Be careful in setting #define values for numerical constants of type

size_t. On some systems, literal values are not automatically extended

to size_t precision unless they are explicitly casted.

WIN32                    default: defined if _WIN32 defined

  Defining WIN32 sets up defaults for MS environment and compilers.

  Otherwise defaults are for unix.

MALLOC_ALIGNMENT         default: (size_t)8

  Controls the minimum alignment for malloc'ed chunks.  It must be a

  power of two and at least 8, even on machines for which smaller

  alignments would suffice. It may be defined as larger than this

  though. Note however that code and data structures are optimized for

  the case of 8-byte alignment.

MSPACES                  default: 0 (false)

  If true, compile in support for independent allocation spaces.

  This is only supported if HAVE_MMAP is true.

ONLY_MSPACES             default: 0 (false)

  If true, only compile in mspace versions, not regular versions.

USE_LOCKS                default: 0 (false)

  Causes each call to each public routine to be surrounded with

  pthread or WIN32 mutex lock/unlock. (If set true, this can be

  overridden on a per-mspace basis for mspace versions.)

FOOTERS                  default: 0

  If true, provide extra checking and dispatching by placing

  information in the footers of allocated chunks. This adds

  space and time overhead.

INSECURE                 default: 0

  If true, omit checks for usage errors and heap space overwrites.

USE_DL_PREFIX            default: NOT defined

  Causes compiler to prefix all public routines with the string 'dl'.

  This can be useful when you only want to use this malloc in one part

  of a program, using your regular system malloc elsewhere.

ABORT                    default: defined as abort()

  Defines how to abort on failed checks.  On most systems, a failed

  check cannot die with an "assert" or even print an informative

  message, because the underlying print routines in turn call malloc,

  which will fail again.  Generally, the best policy is to simply call

  abort(). It's not very useful to do more than this because many

  errors due to overwriting will show up as address faults (null, odd

  addresses etc) rather than malloc-triggered checks, so will also

  abort.  Also, most compilers know that abort() does not return, so

  can better optimize code conditionally calling it.

PROCEED_ON_ERROR           default: defined as 0 (false)

  Controls whether detected bad addresses cause them to bypassed

  rather than aborting. If set, detected bad arguments to free and

  realloc are ignored. And all bookkeeping information is zeroed out

  upon a detected overwrite of freed heap space, thus losing the

  ability to ever return it from malloc again, but enabling the

  application to proceed. If PROCEED_ON_ERROR is defined, the

  static variable malloc_corruption_error_count is compiled in

  and can be examined to see if errors have occurred. This option

  generates slower code than the default abort policy.

DEBUG                    default: NOT defined

  The DEBUG setting is mainly intended for people trying to modify

  this code or diagnose problems when porting to new platforms.

  However, it may also be able to better isolate user errors than just

  using runtime checks.  The assertions in the check routines spell

  out in more detail the assumptions and invariants underlying the

  algorithms.  The checking is fairly extensive, and will slow down

  execution noticeably. Calling malloc_stats or mallinfo with DEBUG

  set will attempt to check every non-mmapped allocated and free chunk

  in the course of computing the summaries.

ABORT_ON_ASSERT_FAILURE   default: defined as 1 (true)

  Debugging assertion failures can be nearly impossible if your

  version of the assert macro causes malloc to be called, which will

  lead to a cascade of further failures, blowing the runtime stack.

  ABORT_ON_ASSERT_FAILURE cause assertions failures to call abort(),

  which will usually make debugging easier.

MALLOC_FAILURE_ACTION     default: sets errno to ENOMEM, or no-op on win32

  The action to take before "return 0" when malloc fails to be able to

  return memory because there is none available.

HAVE_MORECORE             default: 1 (true) unless win32 or ONLY_MSPACES

  True if this system supports sbrk or an emulation of it.

MORECORE                  default: sbrk

  The name of the sbrk-style system routine to call to obtain more

  memory.  See below for guidance on writing custom MORECORE

  functions. The type of the argument to sbrk/MORECORE varies across

  systems.  It cannot be size_t, because it supports negative

  arguments, so it is normally the signed type of the same width as

  size_t (sometimes declared as "intptr_t").  It doesn't much matter

  though. Internally, we only call it with arguments less than half

  the max value of a size_t, which should work across all reasonable

  possibilities, although sometimes generating compiler warnings.  See

  near the end of this file for guidelines for creating a custom

  version of MORECORE.

MORECORE_CONTIGUOUS       default: 1 (true)

  If true, take advantage of fact that consecutive calls to MORECORE

  with positive arguments always return contiguous increasing

  addresses.  This is true of unix sbrk. It does not hurt too much to

  set it true anyway, since malloc copes with non-contiguities.

  Setting it false when definitely non-contiguous saves time

  and possibly wasted space it would take to discover this though.

MORECORE_CANNOT_TRIM      default: NOT defined

  True if MORECORE cannot release space back to the system when given

  negative arguments. This is generally necessary only if you are

  using a hand-crafted MORECORE function that cannot handle negative

  arguments.

HAVE_MMAP                 default: 1 (true)

  True if this system supports mmap or an emulation of it.  If so, and

  HAVE_MORECORE is not true, MMAP is used for all system

  allocation. If set and HAVE_MORECORE is true as well, MMAP is

  primarily used to directly allocate very large blocks. It is also

  used as a backup strategy in cases where MORECORE fails to provide

  space from system. Note: A single call to MUNMAP is assumed to be

  able to unmap memory that may have be allocated using multiple calls

  to MMAP, so long as they are adjacent.

HAVE_MREMAP               default: 1 on linux, else 0

  If true realloc() uses mremap() to re-allocate large blocks and

  extend or shrink allocation spaces.

MMAP_CLEARS               default: 1 on unix

  True if mmap clears memory so calloc doesn't need to. This is true

  for standard unix mmap using /dev/zero.

USE_BUILTIN_FFS            default: 0 (i.e., not used)

  Causes malloc to use the builtin ffs() function to compute indices.

  Some compilers may recognize and intrinsify ffs to be faster than the

  supplied C version. Also, the case of x86 using gcc is special-cased

  to an asm instruction, so is already as fast as it can be, and so

  this setting has no effect. (On most x86s, the asm version is only

  slightly faster than the C version.)

malloc_getpagesize         default: derive from system includes, or 4096.

  The system page size. To the extent possible, this malloc manages

  memory from the system in page-size units.  This may be (and

  usually is) a function rather than a constant. This is ignored

  if WIN32, where page size is determined using getSystemInfo during

  initialization.

USE_DEV_RANDOM             default: 0 (i.e., not used)

  Causes malloc to use /dev/random to initialize secure magic seed for

  stamping footers. Otherwise, the current time is used.

NO_MALLINFO                default: 0

  If defined, don't compile "mallinfo". This can be a simple way

  of dealing with mismatches between system declarations and

  those in this file.

MALLINFO_FIELD_TYPE        default: size_t

  The type of the fields in the mallinfo struct. This was originally

  defined as "int" in SVID etc, but is more usefully defined as

  size_t. The value is used only if  HAVE_USR_INCLUDE_MALLOC_H is not set

REALLOC_ZERO_BYTES_FREES    default: not defined

  This should be set if a call to realloc with zero bytes should

  be the same as a call to free. Some people think it should. Otherwise,

  since this malloc returns a unique pointer for malloc(0), so does

  realloc(p, 0).

LACKS_UNISTD_H, LACKS_FCNTL_H, LACKS_SYS_PARAM_H, LACKS_SYS_MMAN_H

LACKS_STRINGS_H, LACKS_STRING_H, LACKS_SYS_TYPES_H,  LACKS_ERRNO_H

LACKS_STDLIB_H                default: NOT defined unless on WIN32

  Define these if your system does not have these header files.

  You might need to manually insert some of the declarations they provide.

DEFAULT_GRANULARITY        default: page size if MORECORE_CONTIGUOUS,

                                system_info.dwAllocationGranularity in WIN32,

                                otherwise 64K.

      Also settable using mallopt(M_GRANULARITY, x)

  The unit for allocating and deallocating memory from the system.  On

  most systems with contiguous MORECORE, there is no reason to

  make this more than a page. However, systems with MMAP tend to

  either require or encourage larger granularities.  You can increase

  this value to prevent system allocation functions to be called so

  often, especially if they are slow.  The value must be at least one

  page and must be a power of two.  Setting to 0 causes initialization

  to either page size or win32 region size.  (Note: In previous

  versions of malloc, the equivalent of this option was called

  "TOP_PAD")

DEFAULT_TRIM_THRESHOLD    default: 2MB

      Also settable using mallopt(M_TRIM_THRESHOLD, x)

  The maximum amount of unused top-most memory to keep before

  releasing via malloc_trim in free().  Automatic trimming is mainly

  useful in long-lived programs using contiguous MORECORE.  Because

  trimming via sbrk can be slow on some systems, and can sometimes be

  wasteful (in cases where programs immediately afterward allocate

  more large chunks) the value should be high enough so that your

  overall system performance would improve by releasing this much

  memory.  As a rough guide, you might set to a value close to the

  average size of a process (program) running on your system.

  Releasing this much memory would allow such a process to run in

  memory.  Generally, it is worth tuning trim thresholds when a

  program undergoes phases where several large chunks are allocated

  and released in ways that can reuse each other's storage, perhaps

  mixed with phases where there are no such chunks at all. The trim

  value must be greater than page size to have any useful effect.  To

  disable trimming completely, you can set to MAX_SIZE_T. Note that the trick

  some people use of mallocing a huge space and then freeing it at

  program startup, in an attempt to reserve system memory, doesn't

  have the intended effect under automatic trimming, since that memory

  will immediately be returned to the system.

DEFAULT_MMAP_THRESHOLD       default: 256K

      Also settable using mallopt(M_MMAP_THRESHOLD, x)

  The request size threshold for using MMAP to directly service a

  request. Requests of at least this size that cannot be allocated

  using already-existing space will be serviced via mmap.  (If enough

  normal freed space already exists it is used instead.)  Using mmap

  segregates relatively large chunks of memory so that they can be

  individually obtained and released from the host system. A request

  serviced through mmap is never reused by any other request (at least

  not directly; the system may just so happen to remap successive

  requests to the same locations).  Segregating space in this way has

  the benefits that: Mmapped space can always be individually released

  back to the system, which helps keep the system level memory demands

  of a long-lived program low.  Also, mapped memory doesn't become

  `locked' between other chunks, as can happen with normally allocated

  chunks, which means that even trimming via malloc_trim would not

  release them.  However, it has the disadvantage that the space

  cannot be reclaimed, consolidated, and then used to service later

  requests, as happens with normal chunks.  The advantages of mmap

  nearly always outweigh disadvantages for "large" chunks, but the

  value of "large" may vary across systems.  The default is an

  empirically derived value that works well in most systems. You can

  disable mmap by setting to MAX_SIZE_T.

#ifdef KOLIBRI

#define IMPORT __attribute__ ((stdcall)) __attribute__ ((dllimport))

void*  IMPORT KernelAlloc(unsigned size)__asm__("KernelAlloc");

#define IMPORT __attribute__ ((dllimport))

void  __fastcall IMPORT  mem_free(void *mem)__asm__("MemFree");

#define DEFAULT_MMAP_THRESHOLD  ((size_t)32U * (size_t)1024U)

#define ABORT

#undef  WIN32

#undef  _WIN32

typedef unsigned int size_t;

#define HAVE_MMAP 1

#define HAVE_MORECORE 0

#define LACKS_UNISTD_H

#define LACKS_SYS_PARAM_H

#define LACKS_SYS_MMAN_H

#define LACKS_STRING_H

#define LACKS_STRINGS_H

#define LACKS_SYS_TYPES_H

#define LACKS_ERRNO_H

#define MALLOC_FAILURE_ACTION

#define MMAP_CLEARS 0 /* WINCE and some others apparently don't clear */

#if defined(DARWIN) || defined(_DARWIN)

/* Mac OSX docs advise not to use sbrk; it seems better to use mmap */

#define HAVE_MORECORE 0

#endif  /* DARWIN */

#ifndef LACKS_SYS_TYPES_H

#include   /* For size_t */

#endif  /* LACKS_SYS_TYPES_H */

/* The maximum possible size_t value has all bits set */

#define MAX_SIZE_T           (~(size_t)0)

#ifndef ONLY_MSPACES

#define ONLY_MSPACES 0

#endif  /* ONLY_MSPACES */

#ifndef MSPACES

#if ONLY_MSPACES

#define MSPACES 1

#else   /* ONLY_MSPACES */

#define MSPACES 0

#endif  /* ONLY_MSPACES */

#endif  /* MSPACES */

#ifndef MALLOC_ALIGNMENT

#define MALLOC_ALIGNMENT ((size_t)8U)

#endif  /* MALLOC_ALIGNMENT */

#ifndef FOOTERS

#define FOOTERS 0

#endif  /* FOOTERS */

#ifndef ABORT

#define ABORT  abort()

#endif  /* ABORT */

#ifndef ABORT_ON_ASSERT_FAILURE

#define ABORT_ON_ASSERT_FAILURE 1

#endif  /* ABORT_ON_ASSERT_FAILURE */

#ifndef PROCEED_ON_ERROR

#define PROCEED_ON_ERROR 0

#endif  /* PROCEED_ON_ERROR */

#ifndef USE_LOCKS

#define USE_LOCKS 0

#endif  /* USE_LOCKS */

#ifndef INSECURE

#define INSECURE 0

#endif  /* INSECURE */

#ifndef HAVE_MMAP

#define HAVE_MMAP 1

#endif  /* HAVE_MMAP */

#ifndef MMAP_CLEARS

#define MMAP_CLEARS 1

#endif  /* MMAP_CLEARS */

#ifndef HAVE_MREMAP

#ifdef linux

#define HAVE_MREMAP 1

#else   /* linux */

#define HAVE_MREMAP 0

#endif  /* linux */

#endif  /* HAVE_MREMAP */

#ifndef MALLOC_FAILURE_ACTION

#define MALLOC_FAILURE_ACTION  errno = ENOMEM;

#endif  /* MALLOC_FAILURE_ACTION */

#ifndef HAVE_MORECORE

#if ONLY_MSPACES

#define HAVE_MORECORE 0

#else   /* ONLY_MSPACES */

#define HAVE_MORECORE 1

#endif  /* ONLY_MSPACES */

#endif  /* HAVE_MORECORE */

#if !HAVE_MORECORE

#define MORECORE_CONTIGUOUS 0

#else   /* !HAVE_MORECORE */

#ifndef MORECORE

#define MORECORE sbrk

#endif  /* MORECORE */

#ifndef MORECORE_CONTIGUOUS

#define MORECORE_CONTIGUOUS 1

#endif  /* MORECORE_CONTIGUOUS */

#endif  /* HAVE_MORECORE */

#ifndef DEFAULT_GRANULARITY

#if MORECORE_CONTIGUOUS

#define DEFAULT_GRANULARITY (0)  /* 0 means to compute in init_mparams */

#else   /* MORECORE_CONTIGUOUS */

#define DEFAULT_GRANULARITY ((size_t)64U * (size_t)1024U)

#endif  /* MORECORE_CONTIGUOUS */

#endif  /* DEFAULT_GRANULARITY */

#ifndef DEFAULT_TRIM_THRESHOLD

#ifndef MORECORE_CANNOT_TRIM

#define DEFAULT_TRIM_THRESHOLD ((size_t)2U * (size_t)1024U * (size_t)1024U)

#else   /* MORECORE_CANNOT_TRIM */

#define DEFAULT_TRIM_THRESHOLD MAX_SIZE_T

#endif  /* MORECORE_CANNOT_TRIM */

#endif  /* DEFAULT_TRIM_THRESHOLD */

#ifndef DEFAULT_MMAP_THRESHOLD

#if HAVE_MMAP

#define DEFAULT_MMAP_THRESHOLD ((size_t)256U * (size_t)1024U)

#else   /* HAVE_MMAP */

#define DEFAULT_MMAP_THRESHOLD MAX_SIZE_T

#endif  /* HAVE_MMAP */

#endif  /* DEFAULT_MMAP_THRESHOLD */

#ifndef USE_BUILTIN_FFS

#define USE_BUILTIN_FFS 0

#endif  /* USE_BUILTIN_FFS */

#ifndef USE_DEV_RANDOM

#define USE_DEV_RANDOM 0

#endif  /* USE_DEV_RANDOM */

#ifndef NO_MALLINFO

#define NO_MALLINFO 0

#endif  /* NO_MALLINFO */

#ifndef MALLINFO_FIELD_TYPE

#define MALLINFO_FIELD_TYPE size_t

#endif  /* MALLINFO_FIELD_TYPE */

/*

  mallopt tuning options.  SVID/XPG defines four standard parameter

  numbers for mallopt, normally defined in malloc.h.  None of these

  are used in this malloc, so setting them has no effect. But this

  malloc does support the following options.

*/

#define M_TRIM_THRESHOLD     (-1)

#define M_GRANULARITY        (-2)

#define M_MMAP_THRESHOLD     (-3)

/* ------------------------ Mallinfo declarations ------------------------ */

#if !NO_MALLINFO

#endif /* NO_MALLINFO */

#ifdef __cplusplus

extern "C" {

#endif /* __cplusplus */

#if !ONLY_MSPACES

/* ------------------- Declarations of public routines ------------------- */

#ifndef USE_DL_PREFIX

#define dlcalloc               calloc

#define dlfree                 free

#define dlmalloc               malloc

#define dlmemalign             memalign

#define dlrealloc              realloc

#define dlvalloc               valloc

#define dlpvalloc              pvalloc

#define dlmallinfo             mallinfo

#define dlmallopt              mallopt

#define dlmalloc_trim          malloc_trim

#define dlmalloc_stats         malloc_stats

#define dlmalloc_usable_size   malloc_usable_size

#define dlmalloc_footprint     malloc_footprint

#define dlmalloc_max_footprint malloc_max_footprint

#define dlindependent_calloc   independent_calloc

#define dlindependent_comalloc independent_comalloc

#endif /* USE_DL_PREFIX */

/*

  malloc(size_t n)

  Returns a pointer to a newly allocated chunk of at least n bytes, or

  null if no space is available, in which case errno is set to ENOMEM

  on ANSI C systems.

  If n is zero, malloc returns a minimum-sized chunk. (The minimum

  size is 16 bytes on most 32bit systems, and 32 bytes on 64bit

  systems.)  Note that size_t is an unsigned type, so calls with

  arguments that would be negative if signed are interpreted as

  requests for huge amounts of space, which will often fail. The

  maximum supported value of n differs across systems, but is in all

  cases less than the maximum representable value of a size_t.

*/

void* dlmalloc(size_t);

/*

  free(void* p)

  Releases the chunk of memory pointed to by p, that had been previously

  allocated using malloc or a related routine such as realloc.

  It has no effect if p is null. If p was not malloced or already

  freed, free(p) will by default cause the current program to abort.

*/

void  dlfree(void*);

/*

  calloc(size_t n_elements, size_t element_size);

  Returns a pointer to n_elements * element_size bytes, with all locations

  set to zero.

*/

void* dlcalloc(size_t, size_t);

/*

  realloc(void* p, size_t n)

  Returns a pointer to a chunk of size n that contains the same data

  as does chunk p up to the minimum of (n, p's size) bytes, or null

  if no space is available.

  The returned pointer may or may not be the same as p. The algorithm

  prefers extending p in most cases when possible, otherwise it

  employs the equivalent of a malloc-copy-free sequence.

  If p is null, realloc is equivalent to malloc.

  If space is not available, realloc returns null, errno is set (if on

  ANSI) and p is NOT freed.

  if n is for fewer bytes than already held by p, the newly unused

  space is lopped off and freed if possible.  realloc with a size

  argument of zero (re)allocates a minimum-sized chunk.

  The old unix realloc convention of allowing the last-free'd chunk

  to be used as an argument to realloc is not supported.

*/

void* dlrealloc(void*, size_t);

/*

  memalign(size_t alignment, size_t n);

  Returns a pointer to a newly allocated chunk of n bytes, aligned

  in accord with the alignment argument.

  The alignment argument should be a power of two. If the argument is

  not a power of two, the nearest greater power is used.

  8-byte alignment is guaranteed by normal malloc calls, so don't

  bother calling memalign with an argument of 8 or less.

  Overreliance on memalign is a sure way to fragment space.

*/

void* dlmemalign(size_t, size_t);

/*

  valloc(size_t n);

  Equivalent to memalign(pagesize, n), where pagesize is the page

  size of the system. If the pagesize is unknown, 4096 is used.

*/

void* dlvalloc(size_t);

/*

  mallopt(int parameter_number, int parameter_value)

  Sets tunable parameters The format is to provide a

  (parameter-number, parameter-value) pair.  mallopt then sets the

  corresponding parameter to the argument value if it can (i.e., so

  long as the value is meaningful), and returns 1 if successful else

  0.  SVID/XPG/ANSI defines four standard param numbers for mallopt,

  normally defined in malloc.h.  None of these are use in this malloc,

  so setting them has no effect. But this malloc also supports other

  options in mallopt. See below for details.  Briefly, supported

  parameters are as follows (listed defaults are for "typical"

  configurations).

  Symbol            param #  default    allowed param values

  M_TRIM_THRESHOLD     -1   2*1024*1024   any   (MAX_SIZE_T disables)

  M_GRANULARITY        -2     page size   any power of 2 >= page size

  M_MMAP_THRESHOLD     -3      256*1024   any   (or 0 if no MMAP support)

*/

int dlmallopt(int, int);

/*

  malloc_footprint();

  Returns the number of bytes obtained from the system.  The total

  number of bytes allocated by malloc, realloc etc., is less than this

  value. Unlike mallinfo, this function returns only a precomputed

  result, so can be called frequently to monitor memory consumption.

  Even if locks are otherwise defined, this function does not use them,

  so results might not be up to date.

*/

size_t dlmalloc_footprint(void);

/*

  malloc_max_footprint();

  Returns the maximum number of bytes obtained from the system. This

  value will be greater than current footprint if deallocated space

  has been reclaimed by the system. The peak number of bytes allocated

  by malloc, realloc etc., is less than this value. Unlike mallinfo,

  this function returns only a precomputed result, so can be called

  frequently to monitor memory consumption.  Even if locks are

  otherwise defined, this function does not use them, so results might

  not be up to date.

*/

size_t dlmalloc_max_footprint(void);

#if !NO_MALLINFO

#endif /* NO_MALLINFO */

/*

  independent_calloc(size_t n_elements, size_t element_size, void* chunks[]);

  independent_calloc is similar to calloc, but instead of returning a

  single cleared space, it returns an array of pointers to n_elements

  independent elements that can hold contents of size elem_size, each

  of which starts out cleared, and can be independently freed,

  realloc'ed etc. The elements are guaranteed to be adjacently

  allocated (this is not guaranteed to occur with multiple callocs or

  mallocs), which may also improve cache locality in some

  applications.

  The "chunks" argument is optional (i.e., may be null, which is

  probably the most typical usage). If it is null, the returned array

  is itself dynamically allocated and should also be freed when it is

  no longer needed. Otherwise, the chunks array must be of at least

  n_elements in length. It is filled in with the pointers to the

  chunks.

  In either case, independent_calloc returns this pointer array, or

  null if the allocation failed.  If n_elements is zero and "chunks"

  is null, it returns a chunk representing an array with zero elements

  (which should be freed if not wanted).

  Each element must be individually freed when it is no longer

  needed. If you'd like to instead be able to free all at once, you

  should instead use regular calloc and assign pointers into this

  space to represent elements.  (In this case though, you cannot

  independently free elements.)

  independent_calloc simplifies and speeds up implementations of many

  kinds of pools.  It may also be useful when constructing large data

  structures that initially have a fixed number of fixed-sized nodes,

  but the number is not known at compile time, and some of the nodes

  may later need to be freed. For example:

  struct Node { int item; struct Node* next; };

  struct Node* build_list() {

    struct Node** pool;

    int n = read_number_of_nodes_needed();

    if (n <= 0) return 0;

    pool = (struct Node**)(independent_calloc(n, sizeof(struct Node), 0);

    if (pool == 0) die();

    // organize into a linked list...

    struct Node* first = pool[0];

    for (i = 0; i < n-1; ++i)

      pool[i]->next = pool[i+1];

    free(pool);     // Can now free the array (or not, if it is needed later)

    return first;

  }

*/

void** dlindependent_calloc(size_t, size_t, void**);

/*

  independent_comalloc(size_t n_elements, size_t sizes[], void* chunks[]);

  independent_comalloc allocates, all at once, a set of n_elements

  chunks with sizes indicated in the "sizes" array.    It returns

  an array of pointers to these elements, each of which can be

  independently freed, realloc'ed etc. The elements are guaranteed to

  be adjacently allocated (this is not guaranteed to occur with

  multiple callocs or mallocs), which may also improve cache locality

  in some applications.

  The "chunks" argument is optional (i.e., may be null). If it is null

  the returned array is itself dynamically allocated and should also

  be freed when it is no longer needed. Otherwise, the chunks array

  must be of at least n_elements in length. It is filled in with the

  pointers to the chunks.

  In either case, independent_comalloc returns this pointer array, or

  null if the allocation failed.  If n_elements is zero and chunks is

  null, it returns a chunk representing an array with zero elements

  (which should be freed if not wanted).

  Each element must be individually freed when it is no longer

  needed. If you'd like to instead be able to free all at once, you

  should instead use a single regular malloc, and assign pointers at

  particular offsets in the aggregate space. (In this case though, you

  cannot independently free elements.)

  independent_comallac differs from independent_calloc in that each

  element may have a different size, and also that it does not

  automatically clear elements.

  independent_comalloc can be used to speed up allocation in cases

  where several structs or objects must always be allocated at the

  same time.  For example:

  struct Head { ... }

  struct Foot { ... }

  void send_message(char* msg) {

    int msglen = strlen(msg);

    size_t sizes[3] = { sizeof(struct Head), msglen, sizeof(struct Foot) };

    void* chunks[3];

    if (independent_comalloc(3, sizes, chunks) == 0)

      die();

    struct Head* head = (struct Head*)(chunks[0]);

    char*        body = (char*)(chunks[1]);

    struct Foot* foot = (struct Foot*)(chunks[2]);

    // ...

  }

  In general though, independent_comalloc is worth using only for

  larger values of n_elements. For small values, you probably won't

  detect enough difference from series of malloc calls to bother.

  Overuse of independent_comalloc can increase overall memory usage,

  since it cannot reuse existing noncontiguous small chunks that

  might be available for some of the elements.

*/

void** dlindependent_comalloc(size_t, size_t*, void**);

/*

  pvalloc(size_t n);

  Equivalent to valloc(minimum-page-that-holds(n)), that is,

  round up n to nearest pagesize.

 */

void*  dlpvalloc(size_t);

/*

  malloc_trim(size_t pad);

  If possible, gives memory back to the system (via negative arguments

  to sbrk) if there is unused memory at the `high' end of the malloc

  pool or in unused MMAP segments. You can call this after freeing

  large blocks of memory to potentially reduce the system-level memory

  requirements of a program. However, it cannot guarantee to reduce

  memory. Under some allocation patterns, some large free blocks of

  memory will be locked between two used chunks, so they cannot be

  given back to the system.

  The `pad' argument to malloc_trim represents the amount of free

  trailing space to leave untrimmed. If this argument is zero, only

  the minimum amount of memory to maintain internal data structures

  will be left. Non-zero arguments can be supplied to maintain enough

  trailing space to service future expected allocations without having

  to re-obtain memory from the system.

  Malloc_trim returns 1 if it actually released any memory, else 0.

*/

int  dlmalloc_trim(size_t);

/*

  malloc_usable_size(void* p);

  Returns the number of bytes you can actually use in

  an allocated chunk, which may be more than you requested (although

  often not) due to alignment and minimum size constraints.

  You can use this many bytes without worrying about

  overwriting other allocated objects. This is not a particularly great

  programming practice. malloc_usable_size can be more useful in

  debugging and assertions, for example:

  p = malloc(n);

  assert(malloc_usable_size(p) >= 256);

*/

size_t dlmalloc_usable_size(void*);

/*

  malloc_stats();

  Prints on stderr the amount of space obtained from the system (both

  via sbrk and mmap), the maximum amount (which may be more than

  current if malloc_trim and/or munmap got called), and the current

  number of bytes allocated via malloc (or realloc, etc) but not yet

  freed. Note that this is the number of bytes allocated, not the

  number requested. It will be larger than the number requested

  because of alignment and bookkeeping overhead. Because it includes

  alignment wastage as being in use, this figure may be greater than

  zero even when no user-level chunks are allocated.

  The reported current and maximum system memory can be inaccurate if

  a program makes other calls to system memory allocation functions

  (normally sbrk) outside of malloc.

  malloc_stats prints only the most commonly interesting statistics.

  More information can be obtained by calling mallinfo.

*/

void  dlmalloc_stats(void);

#endif /* ONLY_MSPACES */

#if MSPACES

#endif /* MSPACES */

#ifdef __cplusplus

};  /* end of extern "C" */

#endif /* __cplusplus */

/*

  ========================================================================

  To make a fully customizable malloc.h header file, cut everything

  above this line, put into file malloc.h, edit to suit, and #include it

  on the next line, as well as in programs that use this malloc.

  ========================================================================

*/

/* #include "malloc.h" */

/*------------------------------ internal #includes ---------------------- */

#ifdef WIN32

#pragma warning( disable : 4146 ) /* no "unsigned" warnings */

#endif /* WIN32 */

//#include        /* for printing in malloc_stats */

#if 0

#ifndef LACKS_ERRNO_H

#include        /* for MALLOC_FAILURE_ACTION */

#endif /* LACKS_ERRNO_H */

#if FOOTERS

#include         /* for magic initialization */

#endif /* FOOTERS */

#ifndef LACKS_STDLIB_H

#include       /* for abort() */

#endif /* LACKS_STDLIB_H */

#ifdef DEBUG

#if ABORT_ON_ASSERT_FAILURE

#define assert(x) if(!(x)) ABORT

#else /* ABORT_ON_ASSERT_FAILURE */

#include 

#endif /* ABORT_ON_ASSERT_FAILURE */

#else  /* DEBUG */

#define assert(x)

#endif /* DEBUG */

#ifndef LACKS_STRING_H

#include       /* for memset etc */

#endif  /* LACKS_STRING_H */

#if USE_BUILTIN_FFS

#ifndef LACKS_STRINGS_H

#include      /* for ffs */

#endif /* LACKS_STRINGS_H */

#endif /* USE_BUILTIN_FFS */

#if HAVE_MMAP

#ifndef LACKS_SYS_MMAN_H

#include     /* for mmap */

#endif /* LACKS_SYS_MMAN_H */

#ifndef LACKS_FCNTL_H

#include 

#endif /* LACKS_FCNTL_H */

#endif /* HAVE_MMAP */

#if HAVE_MORECORE

#endif /* HAVE_MMAP */

/* -------------------------- MMAP preliminaries ------------------------- */

/*

   If HAVE_MORECORE or HAVE_MMAP are false, we just define calls and

   checks to fail so compiler optimizer can delete code rather than

   using so many "#if"s.

*/

#define MFAIL                ((void*)(MAX_SIZE_T))

#define CMFAIL               ((char*)(MFAIL)) /* defined for convenience */

#if !HAVE_MMAP

#else /* HAVE_MMAP */

#define IS_MMAPPED_BIT       (SIZE_T_ONE)

#define USE_MMAP_BIT         (SIZE_T_ONE)

#ifdef KOLIBRI

/* Win32 MMAP via VirtualAlloc */

static void* win32mmap(size_t size) {

  void* ptr = KernelAlloc(size);

  return (ptr != 0)? ptr: MFAIL;

}

/* For direct MMAP, use MEM_TOP_DOWN to minimize interference */

static void* win32direct_mmap(size_t size) {

  void* ptr = KernelAlloc(size);

  return (ptr != 0)? ptr: MFAIL;

}

/* This function supports releasing coalesed segments */

static int win32munmap(void* ptr, size_t size) {

  KernelFree(ptr);

  return 0;

}

#else

static void* win32mmap(size_t size) {

    void* ptr = mem_alloc(size, 3);

    return (ptr != 0)? ptr: MFAIL;

}

/* For direct MMAP, use MEM_TOP_DOWN to minimize interference */

static void* win32direct_mmap(size_t size) {

    void* ptr = mem_alloc(size, 3);

    return (ptr != 0)? ptr: MFAIL;

}

/* This function supports releasing coalesed segments */

static int win32munmap(void* ptr, size_t size) {

    mem_free(ptr);

    return 0;

}

#endif

#define CALL_MMAP(s)         win32mmap(s)

#define CALL_MUNMAP(a, s)    win32munmap((a), (s))

#define DIRECT_MMAP(s)       win32direct_mmap(s)

#endif /* HAVE_MMAP */

#if HAVE_MMAP && HAVE_MREMAP

#else  /* HAVE_MMAP && HAVE_MREMAP */

#define CALL_MREMAP(addr, osz, nsz, mv) MFAIL

#endif /* HAVE_MMAP && HAVE_MREMAP */