83,7 → 83,8 |
|
cmp ah, 1 ; button id = 1 ? |
jne @f |
exit: mcall -1 ; close this program |
exit: |
mcall -1 ; close this program |
@@: |
cmp eax,0x0000ff00 |
jg load_drv |
102,7 → 103,7 |
|
load_drv: |
shr eax, 16 |
mov word [selected], ax |
mov [selected], ax |
|
mov bl , 6 ; get a dword |
mov bh , ah ; bus |
110,9 → 111,9 |
mov cl , 0 ; offset to device/vendor id |
mcall 62 ; get ID's |
|
mov word [PCI_Vendor], ax |
mov [PCI_Vendor], ax |
shr eax, 16 |
mov word [PCI_Device], ax |
mov [PCI_Device], ax |
call get_drv_ptr |
|
mov ecx, eax |
145,19 → 146,18 |
mov [IOCTL.output], 0 |
|
mcall 68, 17, IOCTL |
mov [drivernumber], al |
|
mov byte[drivernumber], al |
|
jmp still |
|
reset: |
movzx ebx, byte[drivernumber] |
movzx ebx, [drivernumber] |
mcall 74,,2 |
|
jmp still |
|
unload: |
movzx ebx, byte[drivernumber] |
movzx ebx, [drivernumber] |
mcall 74,,3 |
|
jmp still |
202,46 → 202,49 |
;* Gets the PCI Version and Last Bus |
Get_PCI_Info: |
mcall 62, 0 |
mov word [PCI_Version], ax |
mov [PCI_Version], ax |
mcall 62, 1 |
mov byte [PCI_LastBus], al |
mov [PCI_LastBus], al |
;---------------------------------------------------------- |
;* Get all devices on PCI Bus |
mov edx, 20 shl 16 + 110 ; set start write position |
cmp al , 0xff ; 0xFF means no pci bus found |
jne Pci_Exists ; |
ret ; if no bus then leave |
|
Pci_Exists: |
mov byte [V_Bus], 0 ; reset varibles |
mov byte [V_Dev], 0 ; |
mov [V_Bus], 0 |
mov [V_Dev], 0 |
mov edx, 20 shl 16 + 110 ; set start write position |
|
Start_Enum: |
mov bl , 6 ; get a dword |
mov bh , byte [V_Bus] ; bus of pci device |
mov ch , byte [V_Dev] ; device number/function |
mov bl, 6 ; read dword |
mov bh, [V_Bus] |
mov ch, [V_Dev] |
mov cl , 0 ; offset to device/vendor id |
mcall 62 ; get ID's |
|
cmp ax, 0 ; Vendor ID should not be 0 or 0xFFFF |
je nextDev ; check next device if nothing exists here |
|
cmp ax, 0xffff ; |
je nextDev ; |
|
mov word [PCI_Vendor], ax ; There is a device here, save the ID's |
mov [PCI_Vendor], ax ; There is a device here, save the ID's |
shr eax, 16 ; |
mov word [PCI_Device], ax ; |
mov [PCI_Device], ax ; |
mov bl , 4 ; Read config byte |
mov bh , byte [V_Bus] ; Bus # |
mov ch , byte [V_Dev] ; Device # on bus |
mov bh, [V_Bus] ; Bus # |
mov ch, [V_Dev] ; Device # on bus |
mov cl , 0x08 ; Register to read (Get Revision) |
mcall 62 ; Read it |
mov byte [PCI_Rev], al ; Save it |
mov [PCI_Rev], al ; Save it |
mov cl , 0x0b ; Register to read (Get class) |
mcall 62 ; Read it |
|
mov byte [PCI_Class], al ; Save it |
mov [PCI_Class], al ; Save it |
mov cl , 0x0a ; Register to read (Get Subclass) |
mcall 62 ; Read it |
mov byte [PCI_SubClass], al ; Save it |
mov [PCI_SubClass], al ; Save it |
mov cl , 0x09 ; Register to read (Get Interface) |
mcall 62 ; Read it |
mov [PCI_Interface], al ; Save it |
273,19 → 276,19 |
js nextDev |
|
nextdev2: |
test byte [V_Dev], 7 |
test [V_Dev], 7 |
jnz nextDev |
|
or byte [V_Dev], 7 |
or [V_Dev], 7 |
|
nextDev: |
inc [V_Dev] ; lower 3 bits are the function number |
jnz Start_Enum ; jump until we reach zero |
|
jnz Start_Enum ; jump until we reach zero |
mov byte [V_Dev], 0 ; reset device number |
inc byte [V_Bus] ; next bus |
mov al , byte [PCI_LastBus] ; get last bus |
cmp byte [V_Bus], al ; was it last bus |
mov [V_Dev], 0 ; reset device number |
inc [V_Bus] ; next bus |
mov al, [PCI_LastBus] ; get last bus |
cmp [V_Bus], al ; was it last bus |
jbe Start_Enum ; if not jump to keep searching |
ret |
|
338,12 → 341,12 |
shl ecx, 16 |
add ecx, 9 |
|
movzx edx, byte [V_Bus] |
shl dx , 8 |
mov dl , byte [V_Dev] |
xor edx, edx |
mov dh, [V_Bus] |
mov dl, [V_Dev] |
|
mov esi, 0x0000c0ff ; color: yellow if selected, blue otherwise |
cmp word [selected], dx |
cmp [selected], dx |
jne @f |
mov esi, 0x00c0c000 |
@@: |
355,24 → 358,24 |
pop edx |
|
xor esi, esi ; Color of text |
movzx ecx, word [PCI_Vendor] ; number to be written |
movzx ecx, [PCI_Vendor] ; number to be written |
mcall 47, 0x00040100 ; Write Vendor ID |
|
add edx, (4*6+18) shl 16 |
movzx ecx, word [PCI_Device] ; get Vendor ID |
movzx ecx, [PCI_Device] ; get Vendor ID |
mcall ; Draw Vendor ID to Window |
|
add edx, (4*6+18) shl 16 |
movzx ecx, byte [V_Bus] ; get bus number |
movzx ecx, [V_Bus] |
mcall ,0x00020100 ; draw bus number to screen |
|
add edx, (2*6+18) shl 16 |
movzx ecx, byte [V_Dev] ; get device number |
movzx ecx, [V_Dev] |
shr ecx, 3 ; device number is bits 3-7 |
mcall ; Draw device Number To Window |
|
add edx, (2*6+18) shl 16 |
movzx ecx, byte [PCI_Rev] ; get revision number |
movzx ecx, [PCI_Rev] |
mcall ; Draw Revision to screen |
|
add edx, (2*6+18) shl 16 |
390,7 → 393,7 |
; Prints the Vendor's Name based on Vendor ID |
;------------------------------------------------------------------ |
mov edx, VendorsTab |
mov cx , word[PCI_Vendor] |
mov cx, [PCI_Vendor] |
|
.fn: mov ax , [edx] |
add edx, 6 |
539,12 → 542,14 |
V_Dev db ? |
PCI_Version dw ? |
PCI_LastBus db ? |
; Dont change order |
PCI_Vendor dw ? |
PCI_Device dw ? |
|
PCI_Bus db ? |
PCI_Dev db ? |
PCI_Rev db ? |
; don`t change order!!! |
; Dont change order |
PCI_Class db ? |
PCI_SubClass db ? |
PCI_Interface db ? |