/kernel/tags/kolibri0.7.0.0/boot/bootcode.inc |
---|
0,0 → 1,1067 |
$Revision$ |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;; BOOTCODE.INC ;; |
;; ;; |
;; KolibriOS 16-bit loader, ;; |
;; based on bootcode for MenuetOS ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;========================================================================== |
; |
; 16 BIT FUNCTIONS |
; |
;========================================================================== |
putchar: |
; in: al=character |
mov ah, 0Eh |
mov bh, 0 |
int 10h |
ret |
print: |
; in: si->string |
mov al, 186 |
call putchar |
mov al, ' ' |
call putchar |
printplain: |
; in: si->string |
pusha |
lodsb |
@@: |
call putchar |
lodsb |
cmp al, 0 |
jnz @b |
popa |
ret |
getkey: |
; get number in range [bl,bh] (bl,bh in ['0'..'9']) |
; in: bx=range |
; out: ax=digit (1..9, 10 for 0) |
mov ah, 0 |
int 16h |
cmp al, bl |
jb getkey |
cmp al, bh |
ja getkey |
push ax |
call putchar |
pop ax |
and ax, 0Fh |
jnz @f |
mov al, 10 |
@@: |
ret |
setcursor: |
; in: dl=column, dh=row |
mov ah, 2 |
mov bh, 0 |
int 10h |
ret |
macro _setcursor row,column |
{ |
mov dx, row*256 + column |
call setcursor |
} |
boot_read_floppy: |
push si |
xor si, si |
mov ah, 2 ; read |
@@: |
push ax |
int 0x13 |
pop ax |
jnc @f |
inc si |
cmp si, 10 |
jb @b |
mov si, badsect |
sayerr_plain: |
call printplain |
jmp $ |
@@: |
pop si |
ret |
;========================================================================= |
; |
; 16 BIT CODE |
; |
;========================================================================= |
start_of_code: |
cld |
; \begin{diamond}[02.12.2005] |
; if bootloader sets ax = 'KL', then ds:si points to loader block |
cmp ax, 'KL' |
jnz @f |
mov word [cs:cfgmanager.loader_block], si |
mov word [cs:cfgmanager.loader_block+2], ds |
@@: |
; \end{diamond}[02.12.2005] |
; if bootloader sets cx = 'HA' and dx = 'RD', then bx contains identifier of source hard disk |
; (see comment to bx_from_load) |
cmp cx, 'HA' |
jnz no_hd_load |
cmp dx,'RD' |
jnz no_hd_load |
mov word [cs:bx_from_load], bx ; {SPraid}[13.03.2007] |
no_hd_load: |
; set up stack |
mov ax, 3000h |
mov ss, ax |
mov sp, 0EC00h |
; set up segment registers |
push cs |
pop ds |
push cs |
pop es |
; set videomode |
mov ax, 3 |
int 0x10 |
if lang eq ru |
; Load & set russian VGA font (RU.INC) |
mov bp, RU_FNT1 ; RU_FNT1 - First part |
mov bx, 1000h ; 768 bytes |
mov cx, 30h ; 48 symbols |
mov dx, 80h ; 128 - position of first symbol |
mov ax, 1100h |
int 10h |
mov bp, RU_FNT2 ; RU_FNT2 -Second part |
mov bx, 1000h ; 512 bytes |
mov cx, 20h ; 32 symbols |
mov dx, 0E0h ; 224 - position of first symbol |
mov ax, 1100h |
int 10h |
; End set VGA russian font |
else if lang eq et |
mov bp, ET_FNT ; ET_FNT1 |
mov bx, 1000h ; |
mov cx, 255 ; 256 symbols |
xor dx, dx ; 0 - position of first symbol |
mov ax, 1100h |
int 10h |
end if |
; draw frames |
push 0xb800 |
pop es |
xor di, di |
mov ah, 1*16+15 |
; draw top |
mov si, d80x25_top |
mov cx, d80x25_top_num * 80 |
@@: |
lodsb |
stosw |
loop @b |
; draw spaces |
mov si, space_msg |
mov dx, 25 - d80x25_top_num - d80x25_bottom_num |
dfl1: |
push si |
mov cx, 80 |
@@: |
lodsb |
stosw |
loop @b |
pop si |
dec dx |
jnz dfl1 |
; draw bottom |
mov si, d80x25_bottom |
mov cx, d80x25_bottom_num * 80 |
@@: |
lodsb |
stosw |
loop @b |
mov byte [space_msg+80], 0 ; now space_msg is null terminated |
_setcursor d80x25_top_num,0 |
; TEST FOR 386+ |
mov bx, 0x4000 |
pushf |
pop ax |
mov dx, ax |
xor ax, bx |
push ax |
popf |
pushf |
pop ax |
and ax, bx |
and dx, bx |
cmp ax, dx |
jnz cpugood |
mov si, not386 |
sayerr: |
call print |
jmp $ |
cpugood: |
push 0 |
popf |
sti |
; set up esp |
movzx esp, sp |
push 0 |
pop es |
and word [es:0x9031], 0 |
; \begin{Mario79} |
; find HDD IDE DMA PCI device |
; check for PCI BIOS |
mov ax, 0xB101 |
int 0x1A |
jc .nopci |
cmp edx, 'PCI ' |
jnz .nopci |
; find PCI class code |
; class 1 = mass storage |
; subclass 1 = IDE controller |
; a) class 1, subclass 1, programming interface 0x80 |
mov ax, 0xB103 |
mov ecx, 1*10000h + 1*100h + 0x80 |
xor si, si ; device index = 0 |
int 0x1A |
jnc .found |
; b) class 1, subclass 1, programming interface 0x8A |
mov ax, 0xB103 |
mov ecx, 1*10000h + 1*100h + 0x8A |
xor si, si ; device index = 0 |
int 0x1A |
jnc .found |
; c) class 1, subclass 1, programming interface 0x85 |
mov ax, 0xB103 |
mov ecx, 1*10000h + 1*100h + 0x85 |
xor si, si |
int 0x1A |
jc .nopci |
.found: |
; get memory base |
mov ax, 0xB10A |
mov di, 0x20 ; memory base is config register at 0x20 |
int 0x1A |
jc .nopci |
and cx, 0xFFF0 ; clear address decode type |
mov [es:0x9031], cx |
.nopci: |
; \end{Mario79} |
mov al, 0xf6 ; Ñáðîñ êëàâèàòóðû, ðàçðåøèòü ñêàíèðîâàíèå |
out 0x60, al |
xor cx, cx |
wait_loop: ; variant 2 |
; reading state of port of 8042 controller |
in al, 64h |
and al, 00000010b ; ready flag |
; wait until 8042 controller is ready |
loopnz wait_loop |
; --------------- APM --------------------- |
and word [es:0x9044], 0 ; ver = 0.0 (APM not found) |
mov ax, 0x5300 |
xor bx, bx |
int 0x15 |
jc apm_end ; APM not found |
test cx, 2 |
jz apm_end ; APM 32-bit protected-mode interface not supported |
mov [es:0x9044], ax ; Save APM Version |
mov [es:0x9046], cx ; Save APM flags |
; Write APM ver ---- |
and ax, 0xf0f |
add ax, '00' |
mov si, msg_apm |
mov [si + 5], ah |
mov [si + 7], al |
_setcursor 0, 3 |
call printplain |
; ------------------ |
mov ax, 0x5304 ; Disconnect interface |
xor bx, bx |
int 0x15 |
mov ax, 0x5303 ; Connect 32 bit mode interface |
xor bx, bx |
int 0x15 |
mov [es:0x9040], ebx |
mov [es:0x9050], ax |
mov [es:0x9052], cx |
mov [es:0x9054], dx |
apm_end: |
_setcursor d80x25_top_num, 0 |
; DISPLAY VESA INFORMATION |
mov ax, 0x4f00 |
mov di, 0xa000 |
int 0x10 |
cmp ax, 0x004f |
mov si, novesa |
jnz @f |
mov ax, [es:di+4] |
add ax, '0'*256+'0' |
mov si, vervesa |
mov [si+vervesa_off], ah |
mov [si+vervesa_off+2], al |
@@: call print |
; \begin{diamond}[30.11.2005] |
cfgmanager: |
; settings: |
; a) preboot_graph = graphical mode |
; preboot_gprobe = probe this mode? |
; b) preboot_dma = use DMA access? |
; c) preboot_vrrm = use VRR? |
; d) preboot_device = from what boot? |
mov di, preboot_graph |
; check bootloader block |
cmp [.loader_block], -1 |
jz .noloaderblock |
les bx, [.loader_block] |
cmp byte [es:bx], 1 |
mov si, loader_block_error |
jnz sayerr |
test byte [es:bx+1], 1 |
jz @f |
; image in memory present |
cmp [di+preboot_device-preboot_graph], 0 |
jnz @f |
mov [di+preboot_device-preboot_graph], 3 |
@@: |
.noloaderblock: |
; determine default settings |
mov [.bSettingsChanged], 0 |
cmp byte [di], 0 |
jnz .preboot_gr_end |
mov [di+preboot_gprobe-preboot_graph], 0 |
mov al, [vervesa+vervesa_off] |
cmp al, 'x' |
jz .novesa |
cmp al, '1' |
jz .vesa12 |
mov [di+preboot_gprobe-preboot_graph], 2 |
mov al, 3 |
jmp @f |
.vesa12: |
mov al, 7 |
jmp @f |
.novesa: |
mov al, 10 |
@@: |
mov [di], al |
.preboot_gr_end: |
cmp [di+preboot_dma-preboot_graph], 0 |
jnz @f |
mov [di+preboot_dma-preboot_graph], 3 ; DMA: defaults to none |
@@: |
; following 4 lines set variables to 1 if its current value is 0 |
cmp [di+preboot_vrrm-preboot_graph], 1 |
adc [di+preboot_vrrm-preboot_graph], 0 |
cmp [di+preboot_device-preboot_graph], 1 |
adc [di+preboot_device-preboot_graph], 0 |
; notify user |
mov si, linef |
call print |
mov si, start_msg |
call print |
mov si, time_msg |
call print |
; get start time |
call .gettime |
mov [.starttime], eax |
mov word [.timer], .newtimer |
mov word [.timer+2], cs |
.printcfg: |
_setcursor 9,0 |
mov si, current_cfg_msg |
call print |
mov si, curvideo_msg |
call print |
mov al, [preboot_graph] |
cmp al, 8 |
ja .pnovesa |
mov dl, al |
and eax, 3 |
mov si, [modes_msg+eax*2] |
call printplain |
mov si, modevesa20 |
cmp dl, 4 |
jbe @f |
mov si, modevesa12 |
@@: |
call printplain |
cmp dl, 4 |
ja .x |
mov si, probeno_msg |
cmp [preboot_gprobe], 2 |
jnz @f |
mov si, probeok_msg |
@@: |
call printplain |
.x: |
jmp .c |
.pnovesa: |
cmp al, 9 |
mov si, mode9 |
jz @b |
mov si, mode10 |
jmp @b |
.c: |
mov si, linef |
call printplain |
mov si, dma_msg |
call print |
cmp [preboot_dma], 2 |
mov si, on_msg |
jb @f |
mov si, off_msg |
ja @f |
mov si, readonly_msg |
@@: |
call printplain |
mov si, vrrm_msg |
cmp [preboot_vrrm], 1 |
call .say_on_off |
mov si, preboot_device_msg |
call print |
mov al, [preboot_device] |
and eax, 3 |
mov si, [preboot_device_msgs+eax*2] |
call printplain |
.wait: |
_setcursor 25,0 ; out of screen |
; set timer interrupt handler |
cli |
push 0 |
pop es |
mov eax, [es:8*4] |
mov [.oldtimer], eax |
mov eax, [.timer] |
mov [es:8*4], eax |
sti |
; wait for keypressed |
mov ah, 0 |
int 16h |
push ax |
; restore timer interrupt |
push 0 |
pop es |
mov eax, [.oldtimer] |
mov [es:8*4], eax |
mov [.timer], eax |
_setcursor 7,0 |
mov si, space_msg |
call printplain |
pop ax |
; switch on key |
cmp al, 13 |
jz .continue |
or al, 20h |
cmp al, 'a' |
jz .change_a |
cmp al, 'b' |
jz .change_b |
cmp al, 'c' |
jz .change_c |
cmp al, 'd' |
jnz .wait |
_setcursor 15,0 |
mov si, bdev |
call print |
mov bx, '13' |
call getkey |
mov [preboot_device], al |
_setcursor 13,0 |
.d: |
mov [.bSettingsChanged], 1 |
mov si, space_msg |
call printplain |
_setcursor 15,0 |
mov cx, 6 |
@@: |
call printplain |
loop @b |
jmp .printcfg |
.change_a: |
_setcursor 15,0 |
mov si, gr_mode |
call printplain |
mov bx, '09' |
call getkey |
mov [preboot_graph], al |
cmp al, 4 |
ja @f |
mov si, probetext |
call printplain |
mov bx, '12' |
call getkey |
mov [preboot_gprobe], al |
@@: |
_setcursor 10,0 |
jmp .d |
.change_b: |
_setcursor 15,0 |
mov si, ask_dma |
call print |
mov bx, '13' |
call getkey |
mov [preboot_dma], al |
_setcursor 11,0 |
jmp .d |
.change_c: |
_setcursor 15,0 |
mov si, vrrmprint |
call print |
mov bx, '12' |
call getkey |
mov [preboot_vrrm], al |
_setcursor 12,0 |
jmp .d |
.say_on_off: |
pushf |
call print |
mov si, on_msg |
popf |
jz @f |
mov si, off_msg |
@@: jmp printplain |
; novesa and vervesa strings are not used at the moment of executing this code |
virtual at novesa |
.oldtimer dd ? |
.starttime dd ? |
.bSettingsChanged db ? |
.timer dd ? |
end virtual |
.loader_block dd -1 |
.gettime: |
mov ah, 0 |
int 1Ah |
xchg ax, cx |
shl eax, 10h |
xchg ax, dx |
ret |
.newtimer: |
push ds |
push cs |
pop ds |
pushf |
call [.oldtimer] |
pushad |
call .gettime |
sub eax, [.starttime] |
sub ax, 18*5 |
jae .timergo |
neg ax |
add ax, 18-1 |
mov bx, 18 |
xor dx, dx |
div bx |
if lang eq ru |
; ¯®¤®¦¤¨â¥ 5 ᥪã¤, 4/3/2 ᥪã¤ë, 1 ᥪã¤ã |
cmp al, 5 |
mov cl, ' ' |
jae @f |
cmp al, 1 |
mov cl, 'ã' |
jz @f |
mov cl, 'ë' |
@@: mov [time_str+9], cl |
else if lang eq et |
cmp al, 1 |
ja @f |
mov [time_str+9], ' ' |
mov [time_str+10],' ' |
@@: |
else |
; wait 5/4/3/2 seconds, 1 second |
cmp al, 1 |
mov cl, 's' |
ja @f |
mov cl, ' ' |
@@: mov [time_str+9], cl |
end if |
add al, '0' |
mov [time_str+1], al |
mov si, time_msg |
_setcursor 7,0 |
call print |
_setcursor 25,0 |
popad |
pop ds |
iret |
.timergo: |
push 0 |
pop es |
mov eax, [.oldtimer] |
mov [es:8*4], eax |
mov sp, 0EC00h |
.continue: |
sti |
_setcursor 6,0 |
mov si, space_msg |
call printplain |
call printplain |
_setcursor 6,0 |
mov si, loading_msg |
call print |
_setcursor 15,0 |
cmp [.bSettingsChanged], 0 |
jz .load |
cmp [.loader_block], -1 |
jz .load |
les bx, [.loader_block] |
mov eax, [es:bx+3] |
push ds |
pop es |
test eax, eax |
jz .load |
push eax |
mov si, save_quest |
call print |
.waityn: |
mov ah, 0 |
int 16h |
or al, 20h |
cmp al, 'n' |
jz .loadc |
cmp al, 'y' |
jnz .waityn |
call putchar |
mov byte [space_msg+80], 186 |
pop eax |
push cs |
push .cont |
push eax |
retf |
.loadc: |
pop eax |
.cont: |
push cs |
pop ds |
mov si, space_msg |
mov byte [si+80], 0 |
_setcursor 15,0 |
call printplain |
_setcursor 15,0 |
.load: |
; \end{diamond}[02.12.2005] |
; ASK GRAPHICS MODE |
movzx ax, [preboot_graph] |
push 0 |
pop es |
; address is gr_table+6*(ax-1) |
add ax, ax |
lea si, [gr_table + eax + eax*2 - 6] |
mov bx, [si+0] |
mov cx, [si+2] |
mov dx, [si+4] |
cmp al, 9*2 |
mov al, 32 ; BPP |
jb @f |
mov [es:0x9000], al |
or dword [es:0x9018], 0xFFFFFFFF; 0x800000 |
@@: |
mov [es:0x9008], bx |
mov [es:0x900A], cx |
mov [es:0x900C], dx |
test bh, bh |
jz nov |
; USE DEFAULTS OR PROBE |
; bx - mode : cx - x size : dx - y size |
cmp [preboot_gprobe], 1 |
jz noprobe |
mov bx, 0x100 |
newprobe: |
inc bx |
cmp bx, 0x17f |
mov si, prnotfnd |
jz invalid_video_mode |
probemore: |
push cx |
mov ax, 0x4f01 |
mov cx, bx |
mov di, 0xa000 |
int 0x10 |
pop cx |
test byte [es:di], 80h ; lfb? |
jz newprobe |
cmp [es:di+0x12], cx ; x size? |
jnz newprobe |
cmp [es:di+0x14], dx ; y size? |
jnz newprobe |
cmp byte [es:di+0x19], 32 ;24 |
jb newprobe |
; add bx, 0100000000000000b |
or bh, 40h |
mov [es:0x9008], bx |
noprobe: |
; FIND VESA 2.0 LFB & BPP |
mov ax, 0x4f01 |
mov cx, bx |
and cx, 0xfff |
mov di, 0xa000 |
int 0x10 |
; LFB |
mov eax, [es:di+0x28] |
mov [es:0x9018], eax |
; ---- vbe voodoo |
BytesPerLine equ 0x10 |
mov ax, [es:di+BytesPerLine] |
mov [es:0x9001], ax |
; BPP |
mov al, byte [es:di+0x19] |
mov [es:0x9000], al |
nov: |
cmp al, 24 |
mov si, bt24 |
jz bppl |
cmp al, 32 |
mov si, bt32 |
jz bppl |
mov si, btns |
invalid_video_mode: |
call print |
_setcursor (d80x25_top_num+2), 0 |
mov si, start_msg |
call print |
jmp cfgmanager.printcfg |
bppl: |
call print |
; FIND VESA 1.2 PM BANK SWITCH ADDRESS |
push es |
mov ax, 0x4f0A |
xor bx, bx |
int 0x10 |
xor eax, eax |
mov ax, es |
shl eax, 4 |
movzx ebx, di |
add eax, ebx |
mov bx, [es:di] |
add eax, ebx |
pop es |
mov [es:0x9014], eax |
; GRAPHICS ACCELERATION |
; force yes |
mov [es:0x901C], byte 1 |
; DMA ACCESS TO HD |
mov al, [preboot_dma] |
mov [es:0x901F], al |
; VRR_M USE |
mov al,[preboot_vrrm] |
mov [es:0x9030], al |
mov [es:0x901E], byte 1 |
; BOOT DEVICE |
mov al, [preboot_device] |
dec al |
mov [boot_dev], al |
; READ DISKETTE TO MEMORY |
; cmp [boot_dev],0 |
jne no_sys_on_floppy |
mov si,diskload |
call print |
xor ax, ax ; reset drive |
xor dx, dx |
int 0x13 |
; now load floppy image to memory |
; at first load boot sector and first FAT table |
mov cx, 0x0001 ; startcyl,startsector |
xor dx, dx ; starthead,drive |
mov al, 1+9 ; no of sectors to read |
mov bx, 0xB000 ; es:bx -> data area |
call boot_read_floppy |
; and copy them to extended memory |
mov si, movedesc |
mov [si+8*2+3], bh |
push es |
push ds |
pop es |
mov cx, 256*10 |
mov ah, 0x87 |
int 0x15 |
test ah, ah |
jz @f |
sayerr_floppy: |
mov dx, 0x3f2 |
mov al, 0 |
out dx, al |
mov si, memmovefailed |
jmp sayerr_plain |
@@: |
add dword [si+8*3+2], 512*10 |
; copy FAT to second copy |
mov byte [si+8*2+3], 0xB2 |
mov cx, 256*9 |
mov ah, 0x87 |
int 0x15 |
pop es |
test ah, ah |
jnz sayerr_floppy |
add dword [si+8*3+2], 512*9 |
; calculate total number of sectors to read |
mov ax, 1+9+14 ; boot+FAT+root |
mov di, 0xB203 |
.calc_loop: |
test word [es:di], 0xFFF |
jz @f |
inc ax |
@@: |
test word [es:di+1], 0xFFF0 |
jz @f |
inc ax |
@@: |
add di, 3 |
cmp di, 0xB200+1440*3 |
jb .calc_loop |
push ax |
mov bp, 1+9 ; already read sectors |
; now read rest |
mov byte [si+8*2+3], 0xA0 |
mov di, 2-14 ; absolute sector-31 |
mov cx, 0x0002 ; cylinder=0, sector=2 |
mov dx, 0x0100 ; head=1, disk=0 |
.read_loop: |
; determine whether sector must be read |
cmp di, 2 |
jl .read |
mov bx, di |
shr bx, 1 |
jnc .even |
test word [es:bx+di+0xB200], 0xFFF0 |
jmp @f |
.even: |
test word [es:bx+di+0xB200], 0xFFF |
@@: |
jz .skip |
.read: |
mov bx, 0xA000 |
mov al, 1 ; 1 sector |
call boot_read_floppy |
inc bp |
push es |
push ds |
pop es |
pusha |
mov cx, 256 |
mov ah, 0x87 |
int 0x15 |
test ah, ah |
popa |
pop es |
jnz sayerr_floppy |
.skip: |
add dword [si+8*3+2], 512 |
inc cx |
cmp cl, 19 |
jnz @f |
mov cl, 1 |
inc dh |
cmp dh, 2 |
jnz @f |
mov dh, 0 |
inc ch |
@@: |
pop ax |
push ax |
pusha |
; draw percentage |
; total sectors: ax |
; read sectors: bp |
xchg ax, bp |
mov cx, 100 |
mul cx |
div bp |
aam |
xchg al, ah |
add ax, '00' |
mov si, pros |
cmp [si], ax |
jz @f |
mov [si], ax |
call printplain |
@@: |
popa |
inc di |
cmp di, 2880-31 |
jnz .read_loop |
; mov cx, 0x0001 ; startcyl,startsector |
; xor dx, dx ; starthead,drive |
; push word 80*2 ; read no of sect |
; reads: |
; pusha |
; xor si,si |
; newread: |
; mov bx,0xa000 ; es:bx -> data area |
; mov ax,0x0200+18 ; read, no of sectors to read |
; int 0x13 |
; test ah, ah |
; jz goodread |
; inc si |
; cmp si,10 |
; jnz newread |
; mov si,badsect-0x10000 |
;sayerr_plain: |
; call printplain |
; jmp $ |
; goodread: |
; ; move -> 1mb |
; mov si,movedesc-0x10000 |
; push es |
; push ds |
; pop es |
; mov cx,256*18 |
; mov ah,0x87 |
; int 0x15 |
; pop es |
; |
; test ah,ah ; was the move successfull ? |
; je goodmove |
; mov dx,0x3f2 ; floppy motor off |
; mov al,0 |
; out dx,al |
; mov si,memmovefailed-0x10000 |
; jmp sayerr_plain |
; goodmove: |
; |
; add dword [movedesc-0x10000+0x18+2], 512*18 |
; popa |
; inc dh |
; cmp dh,2 |
; jnz bb2 |
; mov dh,0 |
; inc ch |
; pusha ; print prosentage |
; mov si,pros-0x10000 |
; shr ch, 2 |
; mov al, '5' |
; test ch, 1 |
; jnz @f |
; mov al, '0' |
;@@: |
; mov [si+1], al |
; shr ch, 1 |
; add ch, '0' |
; mov [si], ch |
; call printplain |
; popa |
; bb2: |
; pop ax |
; dec ax |
; push ax |
; jnz reads |
; readdone: |
; pop ax |
mov si, backspace2 |
call printplain |
mov si, okt |
call printplain |
no_sys_on_floppy: |
xor ax, ax ; reset drive |
xor dx, dx |
int 0x13 |
mov dx, 0x3f2 ; floppy motor off |
mov al, 0 |
out dx, al |
; SET GRAPHICS |
xor ax, ax |
mov es, ax |
mov ax, [es:0x9008] ; vga & 320x200 |
mov bx, ax |
cmp ax, 0x13 |
je setgr |
cmp ax, 0x12 |
je setgr |
mov ax, 0x4f02 ; Vesa |
setgr: |
int 0x10 |
test ah, ah |
mov si, fatalsel |
jnz sayerr |
; set mode 0x12 graphics registers: |
cmp bx, 0x12 |
jne gmok2 |
mov al, 0x05 |
mov dx, 0x03ce |
push dx |
out dx, al ; select GDC mode register |
mov al, 0x02 |
inc dx |
out dx, al ; set write mode 2 |
mov al, 0x02 |
mov dx, 0x03c4 |
out dx, al ; select VGA sequencer map mask register |
mov al, 0x0f |
inc dx |
out dx, al ; set mask for all planes 0-3 |
mov al, 0x08 |
pop dx |
out dx, al ; select GDC bit mask register |
; for writes to 0x03cf |
gmok2: |
push ds |
pop es |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/booteng.inc |
---|
0,0 → 1,95 |
$Revision$ |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
d80x25_bottom: |
db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
db 'NO WARRANTY ',186 |
db 186,' See file COPYING for details ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
novesa db "Display: EGA/CGA",13,10,0 |
vervesa db "Version of Vesa: Vesa x.x",13,10,0 |
vervesa_off=22 |
msg_apm db " APM x.x ", 0 |
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
db "[3] 1024x768, [4] 1280x1024",13,10 |
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
db "[7] 1024x768, [8] 1280x1024",13,10 |
db 186," EGA/CGA 256 Colors: [9] 320x200, " |
db "VGA 16 Colors: [0] 640x480",13,10 |
db 186," Select mode: ",0 |
bt24 db "Bits Per Pixel: 24",13,10,0 |
bt32 db "Bits Per Pixel: 32",13,10,0 |
vrrmprint db "Apply VRR? (picture frequency greater than 60Hz" |
db " only for transfers:",13,10 |
db 186," 1024*768->800*600 and 800*600->640*480) [1-yes,2-no]:",0 |
;askmouse db " Mouse at:" |
; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
; db " Select port [1-3]: ",0 |
;no_com1 db 13,10,186, " No COM1 mouse",0 |
;no_com2 db 13,10,186, " No COM2 mouse",0 |
ask_dma db "Use DMA for HDD access? [1-yes, 2-only for reading, 3-no]: ",0 |
;gr_direct db 186," Use direct LFB writing? " |
; db "[1-yes/2-no] ? ",0 |
;mem_model db 13,10,186," Motherboard memory [1-16 Mb / 2-32 Mb / " |
; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0 |
;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0 |
bdev db "Load ramdisk from [1-floppy; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-use preloaded ram-image from kernel restart]: ",0 |
probetext db 13,10,13,10,186," Use standart graphics mode? [1-yes, " |
db "2-probe bios (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "Fatal - Videomode not found.",0 |
;modena db "Fatal - VBE 0x112+ required.",0 |
not386 db "Fatal - CPU 386+ required.",0 |
btns db "Fatal - Can't determine color depth.",0 |
fatalsel db "Fatal - Graphics mode not supported by hardware.",0 |
badsect db 13,10,186," Fatal - Bad sector. Replace floppy.",0 |
memmovefailed db 13,10,186," Fatal - Int 0x15 move failed.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db "Loading diskette: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 ; 0=floppy, 1=hd |
start_msg db "Press [abcd] to change settings, press [Enter] to continue booting",13,10,0 |
time_msg db " or wait " |
time_str db " 5 seconds" |
db " before automatical continuation",13,10,0 |
current_cfg_msg db "Current settings:",13,10,0 |
curvideo_msg db " [a] Videomode: ",0 |
mode1 db "640x480",0 |
mode2 db "800x600",0 |
mode3 db "1024x768",0 |
mode4 db "1280x1024",0 |
modes_msg dw mode4,mode1,mode2,mode3 |
modevesa20 db " with LFB",0 |
modevesa12 db ", VESA 1.2 Bnk",0 |
mode9 db "320x200, EGA/CGA 256 colors",0 |
mode10 db "640x480, VGA 16 colors",0 |
probeno_msg db " (standard mode)",0 |
probeok_msg db " (check nonstandard modes)",0 |
dma_msg db " [b] Use DMA for HDD access:",0 |
on_msg db " on",13,10,0 |
off_msg db " off",13,10,0 |
readonly_msg db " only for reading",13,10,0 |
vrrm_msg db " [c] Use VRR:",0 |
preboot_device_msg db " [d] Floppy image: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db "real floppy",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "use already loaded image",13,10,0 |
loading_msg db "Loading KolibriOS...",0 |
save_quest db "Remember current settings? [y/n]: ",0 |
loader_block_error db "Bootloader data invalid, I cannot continue. Stopped.",0 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/bootet.inc |
---|
0,0 → 1,95 |
$Revision$ |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
d80x25_bottom: |
db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
db 'NO WARRANTY ',186 |
db 186,' See file COPYING for details ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
novesa db "Ekraan: EGA/CGA",13,10,0 |
vervesa db "Vesa versioon: Vesa x.x",13,10,0 |
vervesa_off=20 |
msg_apm db " APM x.x ", 0 |
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
db "[3] 1024x768, [4] 1280x1024",13,10 |
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
db "[7] 1024x768, [8] 1280x1024",13,10 |
db 186," EGA/CGA 256 värvi: [9] 320x200, " |
db "VGA 16 värvi: [0] 640x480",13,10 |
db 186," Vali reziim: ",0 |
bt24 db "Bitti pikseli kohta: 24",13,10,0 |
bt32 db "Bitti pikseli kohta: 32",13,10,0 |
vrrmprint db "Kinnita VRR? (ekraani sagedus suurem kui 60Hz" |
db " ainult:",13,10 |
db 186," 1024*768->800*600 ja 800*600->640*480) [1-jah,2-ei]:",0 |
;askmouse db " Hiir:" |
; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
; db " Vali port [1-3]: ",0 |
;no_com1 db 13,10,186, " No COM1 mouse",0 |
;no_com2 db 13,10,186, " No COM2 mouse",0 |
ask_dma db "Use DMA for HDD access? [1-yes, 2-only for reading, 3-no]: ",0 |
;gr_direct db 186," Use direct LFB writing? " |
; db "[1-yes/2-no] ? ",0 |
;mem_model db 13,10,186," Motherboard memory [1-16 Mb / 2-32 Mb / " |
; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0 |
;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0 |
bdev db "Paigalda mäluketas [1-diskett; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-kasuta eellaaditud mäluketast kerneli restardist]: ",0 |
probetext db 13,10,13,10,186," Kasuta standartset graafika reziimi? [1-jah, " |
db "2-leia biosist (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "Fataalne - Videoreziimi ei leitud.",0 |
;modena db "Fataalne - VBE 0x112+ on vajalik.",0 |
not386 db "Fataalne - CPU 386+ on vajalik.",0 |
btns db "Fataalne - Ei suuda värvisügavust määratleda.",0 |
fatalsel db "Fataalne - Graafilist reziimi riistvara ei toeta.",0 |
badsect db 13,10,186," Fataalne - Vigane sektor. Asenda diskett.",0 |
memmovefailed db 13,10,186," Fataalne - Int 0x15 liigutamine ebaõnnestus.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db "Loen disketti: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 ; 0=floppy, 1=hd |
start_msg db "Vajuta [abcd] seadete muutmiseks, vajuta [Enter] laadimise jätkamiseks",13,10,0 |
time_msg db " või oota " |
time_str db " 5 sekundit" |
db " automaatseks jätkamiseks",13,10,0 |
current_cfg_msg db "Praegused seaded:",13,10,0 |
curvideo_msg db " [a] Videoreziim: ",0 |
mode1 db "640x480",0 |
mode2 db "800x600",0 |
mode3 db "1024x768",0 |
mode4 db "1280x1024",0 |
modes_msg dw mode4,mode1,mode2,mode3 |
modevesa20 db " koos LFB",0 |
modevesa12 db ", VESA 1.2 Bnk",0 |
mode9 db "320x200, EGA/CGA 256 värvi",0 |
mode10 db "640x480, VGA 16 värvi",0 |
probeno_msg db " (standard reziim)",0 |
probeok_msg db " (kontrolli ebastandardseid reziime)",0 |
dma_msg db " [b] Use DMA for HDD access:",0 |
on_msg db " sees",13,10,0 |
off_msg db " väljas",13,10,0 |
readonly_msg db " only for reading",13,10,0 |
vrrm_msg db " [c] Kasuta VRR:",0 |
preboot_device_msg db " [d] Disketi kujutis: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db "reaalne diskett",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "kasuta juba laaditud kujutist",13,10,0 |
loading_msg db "Laadin KolibriOS...",0 |
save_quest db "Jäta meelde praegused seaded? [y/n]: ",0 |
loader_block_error db "Alglaaduri andmed vigased, ei saa jätkata. Peatatud.",0 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/bootge.inc |
---|
0,0 → 1,100 |
$Revision$ |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
d80x25_bottom: |
; db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
; db 'NO WARRANTY ',186 |
; db 186,' See file COPYING for details ' |
; db ' ',186 |
db 186,' KolibriOS basiert auf MenuetOS und wird ohne jegliche ' |
db ' Garantie vertrieben ',186 |
db 186,' Details stehen in der Datei COPYING ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
novesa db "Anzeige: EGA/CGA ",13,10,0 |
vervesa db "Vesa-Version: Vesa ",13,10,0 |
vervesa_off=22 |
msg_apm db " APM x.x ", 0 |
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
db "[3] 1024x768, [4] 1280x1024",13,10 |
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
db "[7] 1024x768, [8] 1280x1024",13,10 |
db 186," EGA/CGA 256 Farben: [9] 320x200, " |
db "VGA 16 Farben: [0] 640x480",13,10 |
db 186," Waehle Modus: ",0 |
bt24 db "Bits Per Pixel: 24",13,10,0 |
bt32 db "Bits Per Pixel: 32",13,10,0 |
vrrmprint db "VRR verwenden? (Monitorfrequenz groesser als 60Hz" |
db " only for transfers:",13,10 |
db 186," 1024*768->800*600 und 800*600->640*480) [1-ja,2-nein]:",0 |
;askmouse db " Maus angeschlossen an:" |
; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
; db " Waehle Port [1-3]: ",0 |
;no_com1 db 13,10,186, " Keine COM1 Maus",0 |
;no_com2 db 13,10,186, " Keine COM2 Maus",0 |
ask_dma db "Nutze DMA zum HDD Zugriff? [1-ja, 2-allein fur Lesen, 3-nein]: ",0 |
;gr_direct db 186," Benutze direct LFB? " |
; db "[1-ja/2-nein] ? ",0 |
;mem_model db 13,10,186," Hauptspeicher [1-16 Mb / 2-32 Mb / " |
; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0 |
;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0 |
bdev db "Lade die Ramdisk von [1-Diskette; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-benutze ein bereits geladenes Kernel image]: ",0 |
probetext db 13,10,13,10,186," Nutze Standardgrafikmodi? [1-ja, " |
db "2-BIOS Test (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "Fatal - Videomodus nicht gefunden.",0 |
;modena db "Fatal - VBE 0x112+ required.",0 |
not386 db "Fatal - CPU 386+ benoetigt.",0 |
btns db "Fatal - konnte Farbtiefe nicht erkennen.",0 |
fatalsel db "Fatal - Grafikmodus nicht unterstuetzt.",0 |
badsect db 13,10,186," Fatal - Sektorfehler, Andere Diskette neutzen.",0 |
memmovefailed db 13,10,186," Fatal - Int 0x15 Fehler.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db "Lade Diskette: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 ; 0=floppy, 1=hd |
start_msg db "Druecke [abcd], um die Einstellungen zu aendern , druecke [Enter] zum starten",13,10,0 |
time_msg db " oder warte " |
time_str db " 5 Sekunden" |
db " bis zum automatischen Start",13,10,0 |
current_cfg_msg db "Aktuelle Einstellungen:",13,10,0 |
curvideo_msg db " [a] Videomodus: ",0 |
mode1 db "640x480",0 |
mode2 db "800x600",0 |
mode3 db "1024x768",0 |
mode4 db "1280x1024",0 |
modes_msg dw mode4,mode1,mode2,mode3 |
modevesa20 db " mit LFB",0 |
modevesa12 db ", VESA 1.2 Bnk",0 |
mode9 db "320x200, EGA/CGA 256 colors",0 |
mode10 db "640x480, VGA 16 colors",0 |
probeno_msg db " (Standard Modus)",0 |
probeok_msg db " (teste nicht-standard Modi)",0 |
dma_msg db " [b] Nutze DMA zum HDD Aufschreiben:",0 |
on_msg db " an",13,10,0 |
off_msg db " aus",13,10,0 |
readonly_msg db " fur Lesen",13,10,0 |
vrrm_msg db " [c] Nutze VRR:",0 |
preboot_device_msg db " [d] Diskettenimage: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db "Echte Diskette",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "Nutze bereits geladenes Image",13,10,0 |
loading_msg db "Lade KolibriOS...",0 |
save_quest db "Aktuelle Einstellungen speichern? [y/n]: ",0 |
loader_block_error db "Bootloader Daten ungueltig, Kann nicht fortfahren. Angehalten.",0 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/bootru.inc |
---|
0,0 → 1,95 |
$Revision$ |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
d80x25_bottom: |
db 186,' Kolibri OS ®á®¢ Menuet OS ¨ ¥ ¯à¥¤®áâ ¢«ï¥â ' |
db '¨ª ª¨å £ àa⨩. ',186 |
db 186,' ®¤à®¡¥¥ ᬮâà¨â¥ ä ©« GNU.TXT ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
novesa db "¨¤¥®ª àâ : EGA/CGA",13,10,0 |
vervesa db "¥àá¨ï VESA: Vesa x.x",13,10,0 |
vervesa_off=19 |
msg_apm db " APM x.x ", 0 |
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
db "[3] 1024x768, [4] 1280x1024",13,10 |
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
db "[7] 1024x768, [8] 1280x1024",13,10 |
db 186," EGA/CGA 256 ¢¥â®¢: [9] 320x200, " |
db "VGA 16 ¢¥â®¢: [0] 640x480",13,10 |
db 186," ë¡¥à¨â¥ ¢¨¤¥®à¥¦¨¬: ",0 |
bt24 db "«ã¡¨ 梥â : 24",13,10,0 |
bt32 db "«ã¡¨ 梥â : 32",13,10,0 |
vrrmprint db "ᯮ«ì§®¢ âì VRR? (ç áâ®â ª ¤à®¢ ¢ëè¥ 60 æ" |
db " ⮫쪮 ¤«ï ¯¥à¥å®¤®¢:",13,10 |
db 186," 1024*768>800*600 ¨ 800*600>640*480) [1-¤ , 2-¥â]: ",0 |
;askmouse db "ëèì:" ; 186, " " |
; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
; db " ë¡¥à¨â¥ ¯®àâ [1-3]: ",0 |
;no_com1 db 13,10,186," No COM1 mouse",0 |
;no_com2 db 13,10,186," No COM2 mouse",0 |
ask_dma db "ᯮ«ì§®¢ âì DMA ¤«ï ¤®áâ㯠ª HDD? [1-¤ , 2-⮫쪮 ç⥨¥, 3-¥â]: ",0 |
;gr_direct db 186," ᯮ«ì§®¢ âì «¨¥©ë© ¢¨¤¥®¡ãä¥à? " |
; db "[1-¤ /2-¥â]: ",0 |
;mem_model db 13,10,186," ¡ê+¬ ¯ ¬ï⨠[1-16 Mb / 2-32 Mb / " |
; db "3-64Mb / 4-128 Mb / 5-256 Mb]: ",0 |
;bootlog db 13,10,186," à®á¬®âà¥âì ¦ãà « § £à㧪¨? [1-¥â/2-¤ ]: ",0 |
bdev db " £à㧨âì ®¡à § ¨§ [1-¤¨áª¥â ; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-¨á¯®«ì§®¢ âì 㦥 § £àã¦¥ë© ®¡à §]: ",0 |
probetext db 13,10,13,10,186," â ¤ àâë© ¢¨¤¥®à¥¦¨¬? [1-¤ , " |
db "2-¯à®¢¥à¨âì ¤à㣨¥ (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "訡ª - ¨¤¥®à¥¦¨¬ ¥ ©¤¥.",0 |
;modena db "訡ª - ॡã¥âáï ¯®¤¤¥à¦ª VBE 0x112+.",0 |
not386 db "訡ª - ॡã¥âáï ¯à®æ¥áá®à 386+.",0 |
btns db "訡ª - ¥ ¬®£ã ®¯à¥¤¥«¨âì £«ã¡¨ã 梥â .",0 |
fatalsel db "訡ª - ë¡à ë© ¢¨¤¥®à¥¦¨¬ ¥ ¯®¤¤¥à¦¨¢ ¥âáï.",0 |
badsect db 13,10,186," 訡ª - ¨áª¥â ¯®¢à¥¦¤¥ . ®¯à®¡ã©â¥ ¤àã£ãî.",0 |
memmovefailed db 13,10,186," 訡ª - Int 0x15 move failed.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db " £à㧪 ¤¨áª¥âë: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 |
start_msg db " ¦¬¨â¥ [abcd] ¤«ï ¨§¬¥¥¨ï áâ஥ª, [Enter] ¤«ï ¯à®¤®«¦¥¨ï § £à㧪¨",13,10,0 |
time_msg db " ¨«¨ ¯®¤®¦¤¨â¥ " |
time_str db " 5 ᥪ㭤 " |
db " ¤® ¢â®¬ â¨ç¥áª®£® ¯à®¤®«¦¥¨ï",13,10,0 |
current_cfg_msg db "¥ªã騥 áâனª¨:",13,10,0 |
curvideo_msg db " [a] ¨¤¥®à¥¦¨¬: ",0 |
mode1 db "640x480",0 |
mode2 db "800x600",0 |
mode3 db "1024x768",0 |
mode4 db "1280x1024",0 |
modes_msg dw mode4,mode1,mode2,mode3 |
modevesa20 db " á LFB",0 |
modevesa12 db ", VESA 1.2 Bnk",0 |
mode9 db "320x200, EGA/CGA 256 梥⮢",0 |
mode10 db "640x480, VGA 16 梥⮢",0 |
probeno_msg db " (áâ ¤ àâë© ¢¨¤¥®à¥¦¨¬)",0 |
probeok_msg db " (¯à®¢¥à¨âì ¥áâ ¤ àâë¥ à¥¦¨¬ë)",0 |
dma_msg db " [b] ᯮ«ì§®¢ ¨¥ DMA ¤«ï ¤®áâ㯠ª HDD:",0 |
on_msg db " ¢ª«",13,10,0 |
off_msg db " ¢ëª«",13,10,0 |
readonly_msg db " ⮫쪮 ç⥨¥",13,10,0 |
vrrm_msg db " [c] ᯮ«ì§®¢ ¨¥ VRR:",0 |
preboot_device_msg db " [d] ¡à § ¤¨áª¥âë: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db " áâ®ïé ï ¤¨áª¥â ",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "¨á¯®«ì§®¢ âì 㦥 § £àã¦¥ë© ®¡à §",13,10,0 |
loading_msg db "¤ñâ § £à㧪 KolibriOS...",0 |
save_quest db " ¯®¬¨âì ⥪ã騥 áâனª¨? [y/n]: ",0 |
loader_block_error db "訡ª ¢ ¤ ëå ç «ì®£® § £àã§ç¨ª , ¯à®¤®«¦¥¨¥ ¥¢®§¬®¦®.",0 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/preboot.inc |
---|
0,0 → 1,31 |
$Revision$ |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
display_modechg db 0 ; display mode change for text, yes/no (0 or 2) |
; |
; !! Important note !! |
; |
; Must be set to 2, to avoid two screenmode |
; changes within a very short period of time. |
display_atboot db 0 ; show boot screen messages ( 2-no ) |
preboot_graph db 0 ; graph mode |
preboot_gprobe db 0 ; probe vesa3 videomodes (1-no, 2-yes) |
preboot_vrrm db 0 ; use VRR_M (1-yes, 2- no) |
preboot_dma db 0 ; use DMA for access to HDD (1-always, 2-only for read, 3-never) |
preboot_device db 0 ; boot device |
; (1-floppy 2-harddisk 3-kernel restart) |
;!!!! 0 - autodetect !!!! |
preboot_blogesc db 1 ; start immediately after bootlog |
if $>0x200 |
ERROR: prebooting parameters must fit in first sector!!! |
end if |
hdsysimage db 'KOLIBRI IMG' ; load from |
image_save db 'KOLIBRI IMG' ; save to |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/rdload.inc |
---|
0,0 → 1,102 |
$Revision$ |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
; READ RAMDISK IMAGE FROM HD |
cmp [boot_dev+OS_BASE+0x10000],1 |
jne no_sys_on_hd |
test [DRIVE_DATA+1],byte 0x40 |
jz position_2 |
mov [hdbase],0x1f0 |
mov [hdid],0x0 |
mov [hdpos],1 |
mov [fat32part],0 |
position_1_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+2] |
cmp [fat32part],eax |
jle position_1_1 |
position_2: |
test [DRIVE_DATA+1],byte 0x10 |
jz position_3 |
mov [hdbase],0x1f0 |
mov [hdid],0x10 |
mov [hdpos],2 |
mov [fat32part],0 |
position_2_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+3] |
cmp eax,[fat32part] |
jle position_2_1 |
position_3: |
test [DRIVE_DATA+1],byte 0x4 |
jz position_4 |
mov [hdbase],0x170 |
mov [hdid],0x0 |
mov [hdpos],3 |
mov [fat32part],0 |
position_3_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+4] |
cmp eax,[fat32part] |
jle position_3_1 |
position_4: |
test [DRIVE_DATA+1],byte 0x1 |
jz no_sys_on_hd |
mov [hdbase],0x170 |
mov [hdid],0x10 |
mov [hdpos],4 |
mov [fat32part],0 |
position_4_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+5] |
cmp eax,[fat32part] |
jle position_4_1 |
jmp yes_sys_on_hd |
search_and_read_image: |
call set_FAT32_variables |
mov edx, bootpath |
call read_image |
test eax, eax |
jz image_present |
mov edx, bootpath2 |
call read_image |
test eax, eax |
jz image_present |
ret |
image_present: |
mov [image_retrieved],1 |
ret |
read_image: |
mov eax, hdsysimage+OS_BASE+0x10000 |
mov ebx, 1474560/512 |
mov ecx, RAMDISK |
mov esi, 0 |
mov edi, 12 |
call file_read |
ret |
image_retrieved db 0 |
counter_of_partitions db 0 |
no_sys_on_hd: |
yes_sys_on_hd: |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/ru.inc |
---|
0,0 → 1,93 |
$Revision$ |
; Generated by RUFNT.EXE |
; By BadBugsKiller (C) |
; Modifyed by BadBugsKiller 12.01.2004 17:45 |
; Øðèôò óìåíüøåí â ðàçìåðå è òåïåðü ñîñòîèò èç 2-óõ ÷àñòåé, |
; ñîäåðæàùèõ òîëüêî ñèìâîëû ðóññêîãî àëôàâèòà. |
; ñèìâîëû â êîäèðîâêå ASCII (ÄÎÑ'îâñêàÿ), êîäîâàÿ ñòàíèöà 866. |
RU_FNT1: |
db 0x00, 0x00, 0x1E, 0x36, 0x66, 0xC6, 0xC6, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0x62, 0x60, 0x60, 0x7C, 0x66, 0x66, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFC, 0x66, 0x66, 0x66, 0x7C, 0x66, 0x66, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0x66, 0x62, 0x60, 0x60, 0x60, 0x60, 0x60, 0x60, 0xF0, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x1E, 0x36, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0xFF, 0xC3, 0x81, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xDB, 0xDB, 0x5A, 0x5A, 0x7E, 0x7E, 0x5A, 0xDB, 0xDB, 0xDB, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x06, 0x3C, 0x06, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xCE, 0xDE, 0xF6, 0xE6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x6C, 0x38, 0xC6, 0xC6, 0xC6, 0xCE, 0xDE, 0xF6, 0xE6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xE6, 0x66, 0x6C, 0x6C, 0x78, 0x78, 0x6C, 0x6C, 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x1F, 0x36, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0xCF, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xEE, 0xFE, 0xFE, 0xD6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFC, 0x66, 0x66, 0x66, 0x66, 0x7C, 0x60, 0x60, 0x60, 0xF0, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xC0, 0xC0, 0xC0, 0xC0, 0xC2, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFF, 0xDB, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7E, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x7E, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0x6C, 0x7C, 0x38, 0x38, 0x7C, 0x6C, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xFF, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFF, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0xF8, 0xF0, 0xB0, 0x30, 0x3E, 0x33, 0x33, 0x33, 0x33, 0x7E, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC3, 0xC3, 0xC3, 0xC3, 0xF3, 0xDB, 0xDB, 0xDB, 0xDB, 0xF3, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xF0, 0x60, 0x60, 0x60, 0x7C, 0x66, 0x66, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x26, 0x3E, 0x26, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xCE, 0xDB, 0xDB, 0xDB, 0xFB, 0xDB, 0xDB, 0xDB, 0xDB, 0xCE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x3F, 0x66, 0x66, 0x66, 0x3E, 0x3E, 0x66, 0x66, 0x66, 0xE7, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0C, 0x7C, 0xCC, 0xCC, 0xCC, 0x76, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x02, 0x06, 0x7C, 0xC0, 0xC0, 0xFC, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x66, 0x66, 0x7C, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x62, 0x62, 0x60, 0x60, 0x60, 0xF0, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x36, 0x66, 0x66, 0x66, 0x66, 0xFF, 0xC3, 0xC3, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xFE, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xD6, 0xD6, 0x54, 0x7C, 0x54, 0xD6, 0xD6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x3C, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xCE, 0xD6, 0xE6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x38, 0xC6, 0xC6, 0xCE, 0xD6, 0xE6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xE6, 0x6C, 0x78, 0x78, 0x6C, 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x36, 0x66, 0x66, 0x66, 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xEE, 0xFE, 0xFE, 0xD6, 0xD6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xFE, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
RU_FNT2: |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xDC, 0x66, 0x66, 0x66, 0x66, 0x66, 0x7C, 0x60, 0x60, 0xF0, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC0, 0xC0, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7E, 0x5A, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00 |
db 0x00, 0x00, 0x00, 0x3C, 0x18, 0x7E, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x7E, 0x18, 0x18, 0x3C, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0x6C, 0x38, 0x38, 0x38, 0x6C, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xFF, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFE, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xB0, 0xB0, 0x3E, 0x33, 0x33, 0x7E, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xF6, 0xDE, 0xDE, 0xF6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x60, 0x60, 0x7C, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x3E, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xCE, 0xDB, 0xDB, 0xFB, 0xDB, 0xDB, 0xCE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xC6, 0xC6, 0x7E, 0x36, 0x66, 0xE7, 0x00, 0x00, 0x00, 0x00 |
db 0x6C, 0x00, 0xFE, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x00, 0x7C, 0xC6, 0xC6, 0xFC, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0xC0, 0xC8, 0xF8, 0xC8, 0xC0, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC0, 0xF8, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x66, 0x00, 0x3C, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x6C, 0x38, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x38, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00 |
db 0x00, 0x38, 0x6C, 0x6C, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x0E, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0xEC, 0x6C, 0x3C, 0x1C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xCF, 0xCD, 0xEF, 0xEC, 0xFF, 0xDC, 0xDC, 0xCC, 0xCC, 0xCC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0xC6, 0x7C, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/shutdown.inc |
---|
0,0 → 1,274 |
$Revision$ |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;; Shutdown for Menuet ;; |
;; ;; |
;; Distributed under General Public License ;; |
;; See file COPYING for details. ;; |
;; Copyright 2003 Ville Turjanmaa ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
align 4 |
pr_mode_exit: |
; setup stack |
mov ax, 0x3000 |
mov ss, ax |
mov esp, 0x0EC00 |
; setup ds |
push cs |
pop ds |
lidt [old_ints_h] |
;remap IRQs |
mov al,0x11 |
out 0x20,al |
call rdelay |
out 0xA0,al |
call rdelay |
mov al,0x08 |
out 0x21,al |
call rdelay |
mov al,0x70 |
out 0xA1,al |
call rdelay |
mov al,0x04 |
out 0x21,al |
call rdelay |
mov al,0x02 |
out 0xA1,al |
call rdelay |
mov al,0x01 |
out 0x21,al |
call rdelay |
out 0xA1,al |
call rdelay |
mov al,0xB8 |
out 0x21,al |
call rdelay |
mov al,0xBD |
out 0xA1,al |
sti |
temp_3456: |
xor ax,ax |
mov es,ax |
mov al,byte [es:0x9030] |
cmp al,1 |
jl nbw |
cmp al,4 |
jle nbw32 |
nbw: |
in al,0x60 |
call pause_key |
cmp al,6 |
jae nbw |
mov bl,al |
nbw2: |
in al,0x60 |
call pause_key |
cmp al,bl |
je nbw2 |
cmp al,240 ;ax,240 |
jne nbw31 |
mov al,bl |
dec ax |
jmp nbw32 |
nbw31: |
add bl,128 |
cmp al,bl |
jne nbw |
sub al,129 |
nbw32: |
dec ax ; 1 = write floppy |
js nbw |
jnz no_floppy_write |
call floppy_write |
jmp temp_3456 ;nbw |
no_floppy_write: |
dec ax ; 2 = power off |
jnz no_apm_off |
call APM_PowerOff |
jmp $ |
no_apm_off: |
dec ax ; 3 = reboot |
jnz restart_kernel ; 4 = restart kernel |
push 0x40 |
pop ds |
mov word[0x0072],0x1234 |
jmp 0xF000:0xFFF0 |
pause_key: |
mov cx,100 |
pause_key_1: |
loop pause_key_1 |
ret |
rdelay: |
ret |
floppy_write: ; write diskette image to physical floppy |
cmp [flm],byte 1 |
je fwwritedone |
mov [flm],byte 1 |
xor ax, ax ; reset drive |
xor dx, dx |
int 0x13 |
mov cx,0x0001 ; startcyl,startsector |
xor dx, dx ; starthead,drive |
mov ax, 80*2 ; read no of sect |
fwwrites: |
push ax |
; move 1mb+ -> 0:a000 |
pusha |
mov si, fwmovedesc |
mov cx,256*18 |
mov ah,0x87 |
push ds |
pop es |
int 0x15 |
add dword [fwmovedesc+0x12], 512*18 |
popa |
xor si,si |
mov es,si |
fwnewwrite: |
mov bx,0xa000 ; es:bx -> data area |
mov ax,0x0300+18 ; read, no of sectors to read |
int 0x13 |
test ah, ah |
jz fwgoodwrite |
inc si |
cmp si,10 |
jnz fwnewwrite |
; can't access diskette - return |
pop ax |
ret |
fwgoodwrite: |
inc dh |
cmp dh,2 |
jnz fwbb2 |
mov dh,0 |
inc ch |
fwbb2: |
pop ax |
dec ax |
jnz fwwrites |
ret |
APM_PowerOff: |
mov ax, 5304h |
xor bx, bx |
int 15h |
;!!!!!!!!!!!!!!!!!!!!!!!! |
mov ax,0x5300 |
xor bx,bx |
int 0x15 |
push ax |
mov ax,0x5301 |
xor bx,bx |
int 0x15 |
mov ax,0x5308 |
mov bx,1 |
mov cx,bx |
int 0x15 |
mov ax,0x530E |
xor bx,bx |
pop cx |
int 0x15 |
mov ax,0x530D |
mov bx,1 |
mov cx,bx |
int 0x15 |
mov ax,0x530F |
mov bx,1 |
mov cx,bx |
int 0x15 |
mov ax,0x5307 |
mov bx,1 |
mov cx,3 |
int 0x15 |
;!!!!!!!!!!!!!!!!!!!!!!!! |
fwwritedone: |
ret |
restart_kernel: |
mov ax,0x0003 ; set text mode for screen |
int 0x10 |
jmp 0x4000:0000 |
restart_kernel_4000: |
cli |
push ds |
pop es |
mov cx, 0x8000 |
push cx |
mov ds, cx |
xor si, si |
xor di, di |
rep movsw |
push 0x9000 |
pop ds |
push 0x2000 |
pop es |
pop cx |
rep movsw |
wbinvd ; write and invalidate cache |
mov al, 00110100b |
out 43h, al |
jcxz $+2 |
mov al, 0xFF |
out 40h, al |
jcxz $+2 |
out 40h, al |
jcxz $+2 |
sti |
; (hint by Black_mirror) |
; We must read data from keyboard port, |
; because there may be situation when previous keyboard interrupt is lost |
; (due to return to real mode and IRQ reprogramming) |
; and next interrupt will not be generated (as keyboard waits for handling) |
in al, 0x60 |
; bootloader interface |
push 0x1000 |
pop ds |
mov si, kernel_restart_bootblock |
mov ax, 'KL' |
jmp 0x1000:0000 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/bootstr.inc |
---|
0,0 → 1,52 |
; boot data: common strings (for all languages) |
macro line_full_top { |
db 201 |
times 78 db 205 |
db 187 |
} |
macro line_full_bottom { |
db 200 |
times 78 db 205 |
db 188 |
} |
macro line_half { |
db 186,' ' |
times 76 db 0xc4 |
db ' ',186 |
} |
macro line_space { |
db 186 |
times 78 db 32 |
db 186 |
} |
d80x25_top: |
line_full_top |
cur_line_pos = 75 |
store byte ' ' at d80x25_top+cur_line_pos+1 |
rev_var = __REV__ |
while rev_var > 0 |
store byte rev_var mod 10 + '0' at d80x25_top+cur_line_pos |
cur_line_pos = cur_line_pos - 1 |
rev_var = rev_var / 10 |
end while |
store byte ' ' at d80x25_top+cur_line_pos |
store dword ' SVN' at d80x25_top+cur_line_pos-4 |
space_msg: line_space |
verstr: |
; line_space |
; version string |
db 186,32 |
repeat 78 |
load a byte from version+%-1 |
if a = 13 |
break |
end if |
db a |
end repeat |
repeat 78 - ($-verstr) |
db ' ' |
end repeat |
db 32,186 |
line_half |
d80x25_top_num = 4 |
/kernel/tags/kolibri0.7.0.0/boot/et.inc |
---|
0,0 → 1,7 |
$Revision$ |
; Full ASCII code font |
; only õ and ä added |
; Kaitz |
ET_FNT: |
fontfile file "ETFONT.FNT" |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/tags/kolibri0.7.0.0/boot/ETFONT.FNT |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |