Subversion Repositories Kolibri OS

Compare Revisions

Regard whitespace Rev 4428 → Rev 4429

/kernel/branches/kolibri-process/detect/sear_par.inc
0,0 → 1,139
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
$Revision: 3742 $
 
search_partitions:
; 1. Fill missing parameters in HD_DATA structures.
mov eax, [hd_address_table]
mov [hd0_data.hdbase], eax ;0x1f0
mov [hd1_data.hdbase], eax
mov eax, [hd_address_table+16]
mov [hd2_data.hdbase], eax
mov [hd3_data.hdbase], eax
; 2. Notify the system about /hd* disks.
; For every existing disk, call ide_disk_add with correct parameters.
; Generate name "hdN" on the stack; this is 4 bytes including terminating zero.
; 2a. /hd0: exists if mask 0x40 in [DRIVE_DATA+1] is set,
; data: hd0_data,
; number of partitions: [DRIVE_DATA+2]
test [DRIVE_DATA+1], byte 0x40
jz @f
push 'hd0'
mov eax, esp ; name
mov edx, hd0_data
call ide_disk_add
mov [DRIVE_DATA+2], al
pop ecx ; restore the stack
@@:
; 2b. /hd1: exists if mask 0x10 in [DRIVE_DATA+1] is set,
; data: hd1_data,
; number of partitions: [DRIVE_DATA+3]
test [DRIVE_DATA+1], byte 0x10
jz @f
push 'hd1'
mov eax, esp
mov edx, hd1_data
call ide_disk_add
mov [DRIVE_DATA+3], al
pop ecx
@@:
; 2c. /hd2: exists if mask 4 in [DRIVE_DATA+1] is set,
; data: hd2_data,
; number of partitions: [DRIVE_DATA+4]
test [DRIVE_DATA+1], byte 4
jz @f
push 'hd2'
mov eax, esp
mov edx, hd2_data
call ide_disk_add
mov [DRIVE_DATA+4], al
pop ecx
@@:
; 2d. /hd3: exists if mask 1 in [DRIVE_DATA+1] is set,
; data: hd3_data,
; number of partitions: [DRIVE_DATA+5]
test [DRIVE_DATA+1], byte 1
jz @f
push 'hd3'
mov eax, esp
mov edx, hd3_data
call ide_disk_add
mov [DRIVE_DATA+5], al
pop ecx
@@:
; 3. Notify the system about /bd* disks.
; 3a. Check whether there are BIOS disks. If no, skip step 3.
xor esi, esi
cmp esi, [NumBiosDisks]
jz .nobd
; Loop over all disks.
push 0
push 'bd'
.bdloop:
; 3b. Get the drive number for using in /bd* name.
movzx eax, byte [BiosDisksData+esi*4]
sub al, 80h
; 3c. Convert eax to decimal and store starting with [esp+3].
; First 2 bytes in [esp] are "bd".
lea edi, [esp+2]
; store digits in the stack, ending with -'0'
push -'0'
@@:
xor edx, edx
iglobal
align 4
_10 dd 10
endg
div [_10]
push edx
test eax, eax
jnz @b
; restore digits from the stack, this reverses the order;
; add '0', stop, when zero is reached
@@:
pop eax
add al, '0'
stosb
jnz @b
; 3e. Call the API with userdata = 80h + ecx.
mov eax, esp
lea edx, [esi+80h]
stdcall disk_add, bd_callbacks, eax, edx, 0
test eax, eax
jz @f
stdcall disk_media_changed, eax, 1
@@:
; 3f. Continue the loop.
inc esi
cmp esi, [NumBiosDisks]
jnz .bdloop
pop ecx ecx ; restore stack after name
.nobd:
jmp end_search_partitions
 
; Helper procedure for search_partitions, adds one IDE disk.
; For compatibility, number of partitions for IDE disks is kept in a separate variable,
; so the procedure returns number of partitions.
; eax -> name, edx -> disk data
proc ide_disk_add
stdcall disk_add, ide_callbacks, eax, edx, 0
test eax, eax
jz @f
push eax
stdcall disk_media_changed, eax, 1
pop eax
mov eax, [eax+DISK.NumPartitions]
cmp eax, 255
jbe @f
mov eax, 255
@@:
ret
endp
 
end_search_partitions: