Subversion Repositories Kolibri OS

Compare Revisions

No changes between revisions

Regard whitespace Rev 1634 → Rev 1635

/kernel/branches/Kolibri-acpi/core/sys32.inc
0,0 → 1,834
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; ;;
;; MenuetOS process management, protected ring3 ;;
;; ;;
;; Distributed under GPL. See file COPYING for details. ;;
;; Copyright 2003 Ville Turjanmaa ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
$Revision$
 
 
align 4 ;3A08
build_interrupt_table:
mov edi, idts
mov esi, sys_int
mov ecx, 0x40
mov eax, (10001110b shl 24) + os_code
@@: movsw ;low word of code-entry
stosd ;interrupt gate type : os_code selector
movsw ;high word of code-entry
loop @b
movsd ;copy low dword of trap gate for int 0x40
movsd ;copy high dword of trap gate for int 0x40
lidt [esi]
ret
 
iglobal
align 4
sys_int:
;exception handlers addresses (for interrupt gate construction)
dd e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
dd e8,e9,e10,e11,e12,e13,page_fault_exc,e15
dd e16, e17,e18, e19
times 12 dd unknown_interrupt ;int_20..int_31
 
;interrupt handlers addresses (for interrupt gate construction)
dd irq0, irq_serv.irq_1, irq_serv.irq_2
if USE_COM_IRQ
dd irq_serv.irq_3, irq_serv.irq_4
else
dd p_irq3, p_irq4 ;??? íåñòûêîâêà
end if
dd irq_serv.irq_5, p_irq6, irq_serv.irq_7
dd irq_serv.irq_8, irq_serv.irq_9, irq_serv.irq_10
dd irq_serv.irq_11, irq_serv.irq_12, irqD,p_irq14,p_irq15
times 16 dd unknown_interrupt ;int_0x30..int_0x3F
 
;int_0x40 gate trap (for directly copied)
dw i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16
 
idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
dw 2*($-sys_int-4)-1
dd idts ;0x8000B100
dw 0 ;ïðîñòî âûðàâíèâàíèå
 
msg_fault_sel dd msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
dd msg_exc_c,msg_exc_d,msg_exc_e
 
msg_exc_8 db "Double fault", 0
msg_exc_u db "Undefined Exception", 0
msg_exc_a db "Invalid TSS", 0
msg_exc_b db "Segment not present", 0
msg_exc_c db "Stack fault", 0
msg_exc_d db "General protection fault", 0
msg_exc_e db "Page fault", 0
 
msg_sel_ker db "kernel", 0
msg_sel_app db "application", 0
 
endg
 
macro save_ring3_context {
pushad
}
macro restore_ring3_context {
popad
}
macro exc_wo_code [num] {
e#num :
save_ring3_context
mov bl, num
jmp exc_c
} exc_wo_code 0,1,2,3,4,5,6,15,16,19
 
macro exc_w_code [num] {
e#num :
add esp, 4
save_ring3_context
mov bl, num
jmp exc_c
} exc_w_code 8,9,10,11,12,13,17,18
 
 
uglobal
pf_err_code dd ?
endg
 
page_fault_exc: ; äóðàêîóñòî÷èâîñòü: ñåëåêòîðû èñïîð÷åíû...
pop [ss:pf_err_code]; äåéñòâèòåëüíî äî ñëåäóþùåãî #PF
save_ring3_context
mov bl,14
 
exc_c: ; èñêëþ÷åíèÿ (âñå, êðîìå 7-ãî - #NM)
; Ôðýéì ñòåêà ïðè èñêëþ÷åíèè/ïðåðûâàíèè èç 3-ãî êîëüöà + pushad (ò.å., èìåííî çäåñü)
reg_ss equ esp+0x30
reg_esp3 equ esp+0x2C
reg_eflags equ esp+0x28
reg_cs3 equ esp+0x24
reg_eip equ esp+0x20
; ýòî ôðýéì îò pushad
reg_eax equ esp+0x1C
reg_ecx equ esp+0x18
reg_edx equ esp+0x14
reg_ebx equ esp+0x10
reg_esp0 equ esp+0x0C
reg_ebp equ esp+0x08
reg_esi equ esp+0x04
reg_edi equ esp+0x00
 
Mov ds,ax,app_data ; çàãðóçèì ïðàâèëüíûå çíà÷åíèÿ
mov es,ax ; â ñåãìåíòíûå ðåãèñòðû
cld ; è ïðèâîäèì DF ê ñòàíäàðòó
movzx ebx,bl
; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
test byte[reg_eflags+2],2
jnz v86_exc_c
cmp bl,14 ; #PF
jne @f
call page_fault_handler ; SEE: core/memory.inc
@@: mov esi, [current_slot]
btr [esi+APPDATA.except_mask], ebx
jnc @f
mov eax,[esi+APPDATA.exc_handler]
test eax, eax
jnz IRetToUserHook
@@: cli
mov eax, [esi+APPDATA.debugger_slot]
test eax, eax
jnz .debug
sti
; not debuggee => say error and terminate
call show_error_parameters ;; only ONE using, inline ???
;mov edx, [TASK_BASE]
mov [edx + TASKDATA.state], byte 4 ; terminate
jmp change_task ; stack - here it does not matter at all, SEE: core/shed.inc
.debug:
; we are debugged process, notify debugger and suspend ourself
; eax=debugger PID
mov ecx,1 ; debug_message code=other_exception
cmp bl,1 ; #DB
jne .notify ; notify debugger and suspend ourself
mov ebx, dr6 ; debug_message data=DR6_image
xor edx, edx
mov dr6, edx
mov edx, dr7
mov cl, not 8
.l1: shl dl,2
jc @f
and bl, cl
@@: sar cl,1
jc .l1
mov cl, 3 ; debug_message code=debug_exception
.notify:
push ebx ; debug_message data
mov ebx, [TASK_BASE]
push [ebx+TASKDATA.pid] ; PID
push ecx ; debug_message code ((here: ecx==1/3))
mov cl, 12 ; debug_message size
call debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
add esp,12
mov edx, [TASK_BASE]
mov byte [edx+TASKDATA.state], 1 ; suspended
call change_task ; SEE: core/shed.inc
restore_ring3_context
iretd
 
IRetToUserHook:
xchg eax, [reg_eip]
sub dword[reg_esp3], 8
mov edi, [reg_esp3]
stosd
mov [edi], ebx
restore_ring3_context
unknown_interrupt:
iretd
 
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
show_error_parameters:
mov edx,[TASK_BASE] ;not scratched below
DEBUGF 1, "K : Process - forced terminate PID: %x\n", [edx+TASKDATA.pid]
cmp bl, 0x08
jb .l0
cmp bl, 0x0e
jbe .l1
.l0: mov bl, 0x09
.l1: mov eax,[msg_fault_sel+ebx*4 - 0x08*4]
DEBUGF 1, "K : %s\n", eax
mov eax, [reg_cs3+4]
mov edi, msg_sel_app
mov ebx, [reg_esp3+4]
cmp eax, app_code
je @f
mov edi, msg_sel_ker
mov ebx, [reg_esp0+4]
@@: DEBUGF 1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
DEBUGF 1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
DEBUGF 1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
DEBUGF 1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
ret
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 
restore reg_ss
restore reg_esp3
restore reg_eflags
restore reg_cs
restore reg_eip
restore reg_eax
restore reg_ecx
restore reg_edx
restore reg_ebx
restore reg_esp0
restore reg_ebp
restore reg_esi
restore reg_edi
 
; irq1 -> hid/keyboard.inc
macro irqh [num] {
p_irq#num :
mov edi, num
jmp irqhandler
}
 
 
 
p_irq6:
save_ring3_context
mov ax, app_data ;os_data
mov ds, ax
mov es, ax
mov edi, 6
cmp [v86_irqhooks+edi*8], 0
jnz v86_irq2
call fdc_irq
call ready_for_next_irq
restore_ring3_context
iret
 
 
p_irq14:
save_ring3_context
mov ax, app_data ;os_data
mov ds, ax
mov es, ax
mov edi, 14
cmp [v86_irqhooks+edi*8], 0
jnz v86_irq2
; mov byte [BOOT_VAR + 0x48E], 0xFF
call [irq14_func]
call ready_for_next_irq_1
restore_ring3_context
iret
p_irq15:
save_ring3_context
mov ax, app_data ;os_data
mov ds, ax
mov es, ax
mov edi, 15
cmp [v86_irqhooks+edi*8], 0
jnz v86_irq2
; mov byte [BOOT_VAR + 0x48E], 0xFF
call [irq15_func]
call ready_for_next_irq_1
restore_ring3_context
iret
 
ready_for_next_irq:
mov eax,5
mov [check_idle_semaphore],eax
; mov al, 0x20
add eax,(0x20-0x5)
 
out 0x20, al
ret
;destroy eax
ready_for_next_irq_1:
mov eax,5
mov [check_idle_semaphore],eax
; mov al, 0x20
add eax,(0x20-0x5)
out 0xa0,al
out 0x20, al
ret
 
irqD:
push eax
xor eax,eax
out 0xf0,al
mov al,0x20
out 0xa0,al
out 0x20,al
pop eax
iret
 
 
irqh 2,3,4,5,7,8,9,10,11
 
irqhandler:
 
mov esi,edi ; 1
shl esi,6 ; 1
add esi,irq00read ; 1
shl edi,12 ; 1
add edi,IRQ_SAVE
mov ecx,16
 
irqnewread:
dec ecx
js irqover
 
movzx edx, word [esi] ; 2+
 
test edx, edx ; 1
jz irqover
 
 
mov ebx, [edi] ; address of begin of buffer in edi ; + 0x0 dword - data size
mov eax, 4000 ; + 0x4 dword - data begin offset
cmp ebx, eax
je irqfull
add ebx, [edi + 0x4] ; add data size to data begin offset
cmp ebx, eax ; if end of buffer, begin cycle again
jb @f
 
xor ebx, ebx
 
@@:
add ebx, edi
movzx eax, byte[esi + 3] ; get type of data being received 1 - byte, 2 - word
dec eax
jz irqbyte
dec eax
jnz noirqword
 
in ax,dx
cmp ebx, 3999 ; check for address odd in the end of buffer
jne .odd
mov [ebx + 0x10], ax
jmp .add_size
.odd:
mov [ebx + 0x10], al ; I could make mistake here :)
mov [edi + 0x10], ah
.add_size:
add dword [edi], 2
jmp nextport
 
 
irqbyte:
in al,dx
mov [ebx + 0x10],al
inc dword [edi]
nextport:
add esi,4
jmp irqnewread
 
 
noirqword:
irqfull:
irqover:
 
ret
 
 
 
set_application_table_status:
push eax
 
mov eax,[CURRENT_TASK]
shl eax, 5
add eax,CURRENT_TASK+TASKDATA.pid
mov eax,[eax]
 
mov [application_table_status],eax
 
pop eax
 
ret
 
 
clear_application_table_status:
push eax
 
mov eax,[CURRENT_TASK]
shl eax, 5
add eax,CURRENT_TASK+TASKDATA.pid
mov eax,[eax]
 
cmp eax,[application_table_status]
jne apptsl1
xor eax,eax
mov [application_table_status],eax
apptsl1:
 
pop eax
 
ret
 
; * eax = 64 - íîìåð ôóíêöèè
; * ebx = 1 - åäèíñòâåííàÿ ïîäôóíêöèÿ
; * ecx = íîâûé ðàçìåð ïàìÿòè
;Âîçâðàùàåìîå çíà÷åíèå:
; * eax = 0 - óñïåøíî
; * eax = 1 - íåäîñòàòî÷íî ïàìÿòè
 
sys_resize_app_memory:
; ebx = 1 - resize
; ecx = new amount of memory
 
; cmp eax,1
dec ebx
jnz .no_application_mem_resize
stdcall new_mem_resize, ecx
mov [esp+32], eax
.no_application_mem_resize:
ret
 
iglobal
; process_terminating db 'K : Process - terminating',13,10,0
; process_terminated db 'K : Process - done',13,10,0
msg_obj_destroy db 'K : destroy app object',13,10,0
endg
 
; param
; esi= slot
 
terminate: ; terminate application
 
.slot equ esp ;locals
 
push esi ;save .slot
 
shl esi, 8
cmp [SLOT_BASE+esi+APPDATA.dir_table], 0
jne @F
pop esi
shl esi, 5
mov [CURRENT_TASK+esi+TASKDATA.state], 9
ret
@@:
;mov esi,process_terminating
;call sys_msg_board_str
@@:
cli
cmp [application_table_status],0
je term9
sti
call change_task
jmp @b
term9:
call set_application_table_status
 
; if the process is in V86 mode...
mov eax, [.slot]
shl eax, 8
mov esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
add esi, RING0_STACK_SIZE
cmp [eax+SLOT_BASE+APPDATA.saved_esp0], esi
jz .nov86
; ...it has page directory for V86 mode
mov esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
mov ecx, [esi+4]
mov [eax+SLOT_BASE+APPDATA.dir_table], ecx
; ...and I/O permission map for V86 mode
mov ecx, [esi+12]
mov [eax+SLOT_BASE+APPDATA.io_map], ecx
mov ecx, [esi+8]
mov [eax+SLOT_BASE+APPDATA.io_map+4], ecx
.nov86:
 
mov esi, [.slot]
shl esi,8
add esi, SLOT_BASE+APP_OBJ_OFFSET
@@:
mov eax, [esi+APPOBJ.fd]
test eax, eax
jz @F
 
cmp eax, esi
je @F
 
push esi
call [eax+APPOBJ.destroy]
DEBUGF 1,"%s",msg_obj_destroy
pop esi
jmp @B
@@:
 
mov eax, [.slot]
shl eax, 8
stdcall destroy_app_space, [SLOT_BASE+eax+APPDATA.dir_table], [SLOT_BASE+eax+APPDATA.dlls_list_ptr]
 
mov esi, [.slot]
cmp [fpu_owner],esi ; if user fpu last -> fpu user = 1
jne @F
 
mov [fpu_owner],1
mov eax, [256+SLOT_BASE+APPDATA.fpu_state]
clts
bt [cpu_caps], CAPS_SSE
jnc .no_SSE
fxrstor [eax]
jmp @F
.no_SSE:
fnclex
frstor [eax]
@@:
 
mov [KEY_COUNT],byte 0 ; empty keyboard buffer
mov [BTN_COUNT],byte 0 ; empty button buffer
 
 
; remove defined hotkeys
mov eax, hotkey_list
.loop:
cmp [eax+8], esi
jnz .cont
mov ecx, [eax]
jecxz @f
push dword [eax+12]
pop dword [ecx+12]
@@:
mov ecx, [eax+12]
push dword [eax]
pop dword [ecx]
xor ecx, ecx
mov [eax], ecx
mov [eax+4], ecx
mov [eax+8], ecx
mov [eax+12], ecx
.cont:
add eax, 16
cmp eax, hotkey_list+256*16
jb .loop
; remove hotkeys in buffer
mov eax, hotkey_buffer
.loop2:
cmp [eax], esi
jnz .cont2
and dword [eax+4], 0
and dword [eax], 0
.cont2:
add eax, 8
cmp eax, hotkey_buffer+120*8
jb .loop2
 
mov ecx,esi ; remove buttons
bnewba2:
mov edi,[BTN_ADDR]
mov eax,edi
cld
movzx ebx,word [edi]
inc bx
bnewba:
dec bx
jz bnmba
add eax,0x10
cmp cx,[eax]
jnz bnewba
pusha
mov ecx,ebx
inc ecx
shl ecx,4
mov ebx,eax
add eax,0x10
call memmove
dec dword [edi]
popa
jmp bnewba2
bnmba:
 
pusha ; save window coordinates for window restoring
cld
shl esi,5
add esi,window_data
mov eax,[esi+WDATA.box.left]
mov [draw_limits.left],eax
add eax,[esi+WDATA.box.width]
mov [draw_limits.right],eax
mov eax,[esi+WDATA.box.top]
mov [draw_limits.top],eax
add eax,[esi+WDATA.box.height]
mov [draw_limits.bottom],eax
 
xor eax, eax
mov [esi+WDATA.box.left],eax
mov [esi+WDATA.box.width],eax
mov [esi+WDATA.box.top],eax
mov [esi+WDATA.box.height],eax
mov [esi+WDATA.cl_workarea],eax
mov [esi+WDATA.cl_titlebar],eax
mov [esi+WDATA.cl_frames],eax
mov dword [esi+WDATA.reserved],eax ; clear all flags: wstate, redraw, wdrawn
lea edi, [esi-window_data+draw_data]
mov ecx,32/4
rep stosd
popa
 
; debuggee test
pushad
mov edi, esi
shl edi, 5
mov eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
test eax, eax
jz .nodebug
push 8
pop ecx
push dword [CURRENT_TASK+edi+TASKDATA.pid] ; PID
push 2
call debugger_notify
pop ecx
pop ecx
.nodebug:
popad
 
mov ebx, [.slot]
shl ebx, 8
push ebx
mov ebx,[SLOT_BASE+ebx+APPDATA.pl0_stack]
 
stdcall kernel_free, ebx
 
pop ebx
mov ebx,[SLOT_BASE+ebx+APPDATA.cur_dir]
stdcall kernel_free, ebx
 
mov edi, [.slot]
shl edi,8
add edi,SLOT_BASE
 
mov eax, [edi+APPDATA.io_map]
cmp eax, [SLOT_BASE+256+APPDATA.io_map]
je @F
call free_page
@@:
mov eax, [edi+APPDATA.io_map+4]
cmp eax, [SLOT_BASE+256+APPDATA.io_map+4]
je @F
call free_page
@@:
mov eax, 0x20202020
stosd
stosd
stosd
mov ecx,244/4
xor eax, eax
rep stosd
 
; activate window
movzx eax, word [WIN_STACK + esi*2]
cmp eax, [TASK_COUNT]
jne .dont_activate
pushad
.check_next_window:
dec eax
cmp eax, 1
jbe .nothing_to_activate
lea esi, [WIN_POS+eax*2]
movzx edi, word [esi] ; edi = process
shl edi, 5
cmp [CURRENT_TASK + edi + TASKDATA.state], byte 9 ; skip dead slots
je .check_next_window
add edi, window_data
; \begin{diamond}[19.09.2006]
; skip minimized windows
test [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
jnz .check_next_window
; \end{diamond}
call waredraw
.nothing_to_activate:
popad
.dont_activate:
 
push esi ; remove hd1 & cd & flp reservation
shl esi, 5
mov esi, [esi+CURRENT_TASK+TASKDATA.pid]
cmp [hd1_status], esi
jnz @f
call free_hd_channel
and [hd1_status], 0
@@:
cmp [cd_status], esi
jnz @f
call free_cd_channel
and [cd_status], 0
@@:
cmp [flp_status], esi
jnz @f
and [flp_status], 0
@@:
pop esi
cmp [bgrlockpid], esi
jnz @f
and [bgrlockpid], 0
and [bgrlock], 0
@@:
 
pusha ; remove all irq reservations
mov eax,esi
shl eax, 5
mov eax,[eax+CURRENT_TASK+TASKDATA.pid]
mov edi,irq_owner
xor ebx, ebx
xor edx, edx
newirqfree:
cmp [edi + 4 * ebx], eax
jne nofreeirq
mov [edi + 4 * ebx], edx ; remove irq reservation
mov [irq_tab + 4 * ebx], edx ; remove irq handler
mov [irq_rights + 4 * ebx], edx ; set access rights to full access
nofreeirq:
inc ebx
cmp ebx, 16
jb newirqfree
popa
 
pusha ; remove all port reservations
mov edx,esi
shl edx, 5
add edx,CURRENT_TASK
mov edx,[edx+TASKDATA.pid]
 
rmpr0:
 
mov esi,[RESERVED_PORTS]
 
test esi,esi
jz rmpr9
 
rmpr3:
 
mov edi,esi
shl edi,4
add edi,RESERVED_PORTS
 
cmp edx,[edi]
je rmpr4
 
dec esi
jnz rmpr3
 
jmp rmpr9
 
rmpr4:
 
mov ecx,256
sub ecx,esi
shl ecx,4
 
mov esi,edi
add esi,16
cld
rep movsb
 
dec dword [RESERVED_PORTS]
 
jmp rmpr0
 
rmpr9:
 
popa
mov edi,esi ; do not run this process slot
shl edi, 5
mov [edi+CURRENT_TASK + TASKDATA.state],byte 9
; debugger test - terminate all debuggees
mov eax, 2
mov ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
.xd0:
cmp eax, [TASK_COUNT]
ja .xd1
cmp dword [ecx], esi
jnz @f
and dword [ecx], 0
pushad
xchg eax, ecx
mov ebx, 2
call sys_system
popad
@@:
inc eax
add ecx, 0x100
jmp .xd0
.xd1:
; call systest
sti ; .. and life goes on
 
mov eax, [draw_limits.left]
mov ebx, [draw_limits.top]
mov ecx, [draw_limits.right]
mov edx, [draw_limits.bottom]
call calculatescreen
xor eax, eax
xor esi, esi
call redrawscreen
 
mov [MOUSE_BACKGROUND],byte 0 ; no mouse background
mov [DONT_DRAW_MOUSE],byte 0 ; draw mouse
 
and [application_table_status],0
;mov esi,process_terminated
;call sys_msg_board_str
add esp, 4
ret
restore .slot
 
iglobal
boot_sched_1 db 'Building gdt tss pointer',0
boot_sched_2 db 'Building IDT table',0
endg
 
 
build_scheduler:
 
mov esi,boot_sched_1
call boot_log
; call build_process_gdt_tss_pointer
 
; mov esi,boot_sched_2
; call boot_log
 
ret
Property changes:
Added: svn:keywords
+Revision
\ No newline at end of property