| 0,0 → 1,104 |
|---|
| Vertical Refresh Rater |
| |
| Version 2.0 |
| |
| Copyright (C) 2003, Trans |
| |
| |
| Text Version 1.1 (02.08.03) |
| |
| Win text (cp1251). (DOS codepage text - see down.) |
| ------------------------------------------------------------------------------- |
| |
| Contents: |
| 1. Why it need? |
| 2. Installation. |
| 3. Using. |
| 4. FAQ. |
| 5. Support. |
| |
| 1. Why it need? |
| --------------------- |
| The problem of "60 Hz" is falling stand before of users of MeOS in modern condisions. |
| As a rule, most modern computers consist of 17" monitor (all written later is not actual |
| for owners of LCD monitors). If on 14" or 15" monitors the problem of "60 Hz" not a |
| main, but with 17" monitor it's a most pantfull. And with more size monitors I have no |
| words for discusion: it's a slade-show. Of couse, all of the upper correlated with |
| standart interface of VESA. As for VESA 3.0 - yes, interface have more rich features, |
| but it have no possiblity of change videomode in protect mode (the Virtual86 not realized |
| in MeOS !!!!!). |
| |
| The MeOS not known as a detected devices on boot, it setting of standard VESA videomode |
| with 60 Hz vertical refrash rate ! |
| |
| This programm is a FreeWare. And distribute "AS IS ...". Author not |
| carreing responsibility for probable damage :) . |
| |
| !!!!!_Warning_!!!!!: |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| ! On this time programm have a EXPERIMENTAL status (!). And this reason you have a ! |
| ! chance destroy own device (monitor). Espesialy this taking attantionall users with ! |
| ! monitor without of rate protection. ! |
| ! If you decide using this util I have a suggestion: fill of information form and ! |
| ! send me. ! |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| 2. Installation. |
| ----------------- |
| Extract file VRR (it's ordinary executed MeOS file) from archive and situated it on |
| C:\ root or MeOS floppy. In main, VRR may situated on any directory (you must have |
| possibility run this file under MeOS). |
| |
| |
| 3. Using. |
| ---------- |
| The VRR is a standard executed file of Menuet Operation System. You may send on |
| execute this file by SYSTREE or MASH. |
| |
| After redraw of programm window will be present of current vertical refrash rate |
| and table with possibiling videoregimes. It's sorrably, table have VERY small |
| videomode (the programm is experimental). |
| |
| Change of videomode |
| ~~~~~~~~~~~~~~~~~~~~~ |
| You may select interesting videomode using _ONLY_ numerical keys: 1,2,3,4 and 5. |
| In a first step you must select resolution of videoregime. In a second step - need |
| select of vertical refresh rate. All changes are indicated on screen in a the |
| programm window. After select videomode, to set mode you must press "Enter" or |
| button "Ok". Notification: in this time all executing MeOS programs will be |
| killing. It this needed for minimize artefacts of the screen. After change videomode |
| you have a two way. First way: you can not any doing and after 13 seconds waiting |
| return last videomode. Second way: press two-three time any key or some time mouse |
| click on artefacts of VRR (or this plase) and fixing selected mode. Also you have |
| possibility modification of horizontal screen size by button "Left"\"Right" or keys |
| "+\-". For correcting your select you may use button "Cancel". |
| |
| Also in programm realized return at initial videomode with 60 Hz vertical refresh |
| by button "Default". And you may return in last videomode by button "Return" or |
| key "r" |
| |
| Note: |
| ~~~~~~ |
| In this time programm may change vertical refresh rate _ONLY_ by lowing screen |
| resolution, because this method will be using at most part videocard |
| (VGA, SVGA or modern) |
| |
| Example: |
| If you have videomode 1024x768x60Hz and if you want select 800x600x95Hz, you must |
| press key "3" and key "1". After that key "Enter" or button "Ok". And after redraw |
| screen two time click on last program window position. If need using button |
| "Left\Right" for correcting horizontal size. |
| |
| 4. FAQ. |
| ---------- |
| |
| 5. Supports. |
| ---------------- |
| All questions, notes and wishs you may send to author by following e-mail: |
| |
| transafe@rambler.ru |
| transafe@chat.ru |
| trans397@yahoo.com |
| |
| Using with enjoy! |
| Trans. |