0,0 → 1,104 |
Vertical Refresh Rater |
|
Version 2.0 |
|
Copyright (C) 2003, Trans |
|
|
Text Version 1.1 (02.08.03) |
|
Win text (cp1251). (DOS codepage text - see down.) |
------------------------------------------------------------------------------- |
|
Contents: |
1. Why it need? |
2. Installation. |
3. Using. |
4. FAQ. |
5. Support. |
|
1. Why it need? |
--------------------- |
The problem of "60 Hz" is falling stand before of users of MeOS in modern condisions. |
As a rule, most modern computers consist of 17" monitor (all written later is not actual |
for owners of LCD monitors). If on 14" or 15" monitors the problem of "60 Hz" not a |
main, but with 17" monitor it's a most pantfull. And with more size monitors I have no |
words for discusion: it's a slade-show. Of couse, all of the upper correlated with |
standart interface of VESA. As for VESA 3.0 - yes, interface have more rich features, |
but it have no possiblity of change videomode in protect mode (the Virtual86 not realized |
in MeOS !!!!!). |
|
The MeOS not known as a detected devices on boot, it setting of standard VESA videomode |
with 60 Hz vertical refrash rate ! |
|
This programm is a FreeWare. And distribute "AS IS ...". Author not |
carreing responsibility for probable damage :) . |
|
!!!!!_Warning_!!!!!: |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
! On this time programm have a EXPERIMENTAL status (!). And this reason you have a ! |
! chance destroy own device (monitor). Espesialy this taking attantionall users with ! |
! monitor without of rate protection. ! |
! If you decide using this util I have a suggestion: fill of information form and ! |
! send me. ! |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
|
2. Installation. |
----------------- |
Extract file VRR (it's ordinary executed MeOS file) from archive and situated it on |
C:\ root or MeOS floppy. In main, VRR may situated on any directory (you must have |
possibility run this file under MeOS). |
|
|
3. Using. |
---------- |
The VRR is a standard executed file of Menuet Operation System. You may send on |
execute this file by SYSTREE or MASH. |
|
After redraw of programm window will be present of current vertical refrash rate |
and table with possibiling videoregimes. It's sorrably, table have VERY small |
videomode (the programm is experimental). |
|
Change of videomode |
~~~~~~~~~~~~~~~~~~~~~ |
You may select interesting videomode using _ONLY_ numerical keys: 1,2,3,4 and 5. |
In a first step you must select resolution of videoregime. In a second step - need |
select of vertical refresh rate. All changes are indicated on screen in a the |
programm window. After select videomode, to set mode you must press "Enter" or |
button "Ok". Notification: in this time all executing MeOS programs will be |
killing. It this needed for minimize artefacts of the screen. After change videomode |
you have a two way. First way: you can not any doing and after 13 seconds waiting |
return last videomode. Second way: press two-three time any key or some time mouse |
click on artefacts of VRR (or this plase) and fixing selected mode. Also you have |
possibility modification of horizontal screen size by button "Left"\"Right" or keys |
"+\-". For correcting your select you may use button "Cancel". |
|
Also in programm realized return at initial videomode with 60 Hz vertical refresh |
by button "Default". And you may return in last videomode by button "Return" or |
key "r" |
|
Note: |
~~~~~~ |
In this time programm may change vertical refresh rate _ONLY_ by lowing screen |
resolution, because this method will be using at most part videocard |
(VGA, SVGA or modern) |
|
Example: |
If you have videomode 1024x768x60Hz and if you want select 800x600x95Hz, you must |
press key "3" and key "1". After that key "Enter" or button "Ok". And after redraw |
screen two time click on last program window position. If need using button |
"Left\Right" for correcting horizontal size. |
|
4. FAQ. |
---------- |
|
5. Supports. |
---------------- |
All questions, notes and wishs you may send to author by following e-mail: |
|
transafe@rambler.ru |
transafe@chat.ru |
trans397@yahoo.com |
|
Using with enjoy! |
Trans. |