Subversion Repositories Kolibri OS

Compare Revisions

Regard whitespace Rev 5361 → Rev 5362

/contrib/sdk/sources/vaapi/libva-1.4.1/va/va_enc_h264.h
0,0 → 1,592
/*
* Copyright (c) 2007-2011 Intel Corporation. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
 
/**
* \file va_enc_h264.h
* \brief The H.264 encoding API
*
* This file contains the \ref api_enc_h264 "H.264 encoding API".
*/
 
#ifndef VA_ENC_H264_H
#define VA_ENC_H264_H
 
#ifdef __cplusplus
extern "C" {
#endif
 
/**
* \defgroup api_enc_h264 H.264 encoding API
*
* @{
*/
 
/**
* @name Picture flags
*
* Those flags flags are meant to signal when a picture marks the end
* of a sequence, a stream, or even both at once.
*
* @{
*/
/**
* \brief Marks the last picture in the sequence.
*
* i.e. the driver appends \c end_of_seq() NAL unit to the encoded frame.
*/
#define H264_LAST_PICTURE_EOSEQ 0x01
/**
* \brief Marks the last picture in the stream.
*
* i.e. the driver appends \c end_of_stream() NAL unit to the encoded frame.
*/
#define H264_LAST_PICTURE_EOSTREAM 0x02
/**@}*/
 
/**
* \brief Packed header types specific to H.264 encoding.
*
* Types of packed headers generally used for H.264 encoding. Each
* associated packed header data buffer shall contain the start code
* prefix 0x000001 followed by the complete NAL unit, thus also
* including the \c nal_unit_type.
*
* Note: the start code prefix can contain an arbitrary number of leading
* zeros. The driver will skip them for emulation prevention bytes insertion,
* if necessary.
*/
typedef enum {
/**
* \brief Packed Sequence Parameter Set (SPS).
*
* The corresponding packed header data buffer shall contain the
* complete seq_parameter_set_rbsp() syntax element.
*
* Note: packed \c nal_unit_type shall be equal to 7.
*/
VAEncPackedHeaderH264_SPS = VAEncPackedHeaderSequence,
/**
* \brief Packed Picture Parameter Set (PPS).
*
* The corresponding packed header data buffer shall contain the
* complete pic_parameter_set_rbsp() syntax element.
*
* Note: packed \c nal_unit_type shall be equal to 8.
*/
VAEncPackedHeaderH264_PPS = VAEncPackedHeaderPicture,
/**
* \brief Packed slice header.
*
* The corresponding packed header data buffer shall contain the
* \c slice_header() syntax element only, along with any start
* code prefix and NAL unit type preceeding it. i.e. this means
* that the buffer does not contain any of the \c slice_data() or
* the \c rbsp_slice_trailing_bits().
*
* Note: packed \c nal_unit_type shall be equal to 1 (non-IDR
* picture), or 5 (IDR picture).
*/
VAEncPackedHeaderH264_Slice = VAEncPackedHeaderSlice,
/**
* \brief Packed Supplemental Enhancement Information (SEI).
*
* The corresponding packed header data buffer shall contain the
* complete sei_rbsp() syntax element, thus including several
* sei_message() elements if necessary.
*
* Note: packed \c nal_unit_type shall be equal to 6.
*/
VAEncPackedHeaderH264_SEI = (VAEncPackedHeaderMiscMask | 1),
} VAEncPackedHeaderTypeH264;
 
/**
* \brief Sequence parameter for H.264 encoding in baseline, main & high
* profiles.
*
* This structure holds information for \c seq_parameter_set_data() as
* defined by the H.264 specification.
*
* If packed sequence headers mode is used, i.e. if the encoding
* pipeline was configured with the #VA_ENC_PACKED_HEADER_SEQUENCE
* flag, then the driver expects two more buffers to be provided to
* the same \c vaRenderPicture() as this buffer:
* - a #VAEncPackedHeaderParameterBuffer with type set to
* VAEncPackedHeaderType::VAEncPackedHeaderSequence ;
* - a #VAEncPackedHeaderDataBuffer which holds the actual packed
* header data.
*
* If \c seq_scaling_matrix_present_flag is set to \c 1, then a
* #VAIQMatrixBufferH264 buffer shall also be provided within the same
* \c vaRenderPicture() call as this sequence parameter buffer.
*/
typedef struct _VAEncSequenceParameterBufferH264 {
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char seq_parameter_set_id;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char level_idc;
/** \brief Period between I frames. */
unsigned int intra_period;
/** \brief Period between IDR frames. */
unsigned int intra_idr_period;
/** \brief Period between I/P frames. */
unsigned int ip_period;
/**
* \brief Initial bitrate set for this sequence in CBR or VBR modes.
*
* This field represents the initial bitrate value for this
* sequence if CBR or VBR mode is used, i.e. if the encoder
* pipeline was created with a #VAConfigAttribRateControl
* attribute set to either \ref VA_RC_CBR or \ref VA_RC_VBR.
*
* The bitrate can be modified later on through
* #VAEncMiscParameterRateControl buffers.
*/
unsigned int bits_per_second;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int max_num_ref_frames;
/** \brief Picture width in macroblocks. */
unsigned short picture_width_in_mbs;
/** \brief Picture height in macroblocks. */
unsigned short picture_height_in_mbs;
 
union {
struct {
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int chroma_format_idc : 2;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int frame_mbs_only_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int mb_adaptive_frame_field_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int seq_scaling_matrix_present_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int direct_8x8_inference_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int log2_max_frame_num_minus4 : 4;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int pic_order_cnt_type : 2;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int log2_max_pic_order_cnt_lsb_minus4 : 4;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int delta_pic_order_always_zero_flag : 1;
} bits;
unsigned int value;
} seq_fields;
 
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char bit_depth_luma_minus8;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char bit_depth_chroma_minus8;
 
/** if pic_order_cnt_type == 1 */
/**@{*/
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char num_ref_frames_in_pic_order_cnt_cycle;
/** \brief Same as the H.264 bitstream syntax element. */
int offset_for_non_ref_pic;
/** \brief Same as the H.264 bitstream syntax element. */
int offset_for_top_to_bottom_field;
/** \brief Same as the H.264 bitstream syntax element. */
int offset_for_ref_frame[256];
/**@}*/
 
/** @name Cropping (optional) */
/**@{*/
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char frame_cropping_flag;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int frame_crop_left_offset;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int frame_crop_right_offset;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int frame_crop_top_offset;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int frame_crop_bottom_offset;
/**@}*/
 
/** @name VUI parameters (optional) */
/**@{*/
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char vui_parameters_present_flag;
union {
struct {
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int aspect_ratio_info_present_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int timing_info_present_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int bitstream_restriction_flag : 1;
/** \brief Range: 0 to 16, inclusive. */
unsigned int log2_max_mv_length_horizontal : 5;
/** \brief Range: 0 to 16, inclusive. */
unsigned int log2_max_mv_length_vertical : 5;
} bits;
unsigned int value;
} vui_fields;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char aspect_ratio_idc;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int sar_width;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int sar_height;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int num_units_in_tick;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int time_scale;
/**@}*/
} VAEncSequenceParameterBufferH264;
 
/**
* \brief Picture parameter for H.264 encoding in baseline, main & high
* profiles.
*
* This structure holds information for \c pic_parameter_set_rbsp() as
* defined by the H.264 specification.
*
* If packed picture headers mode is used, i.e. if the encoding
* pipeline was configured with the #VA_ENC_PACKED_HEADER_PICTURE
* flag, then the driver expects two more buffers to be provided to
* the same \c vaRenderPicture() as this buffer:
* - a #VAEncPackedHeaderParameterBuffer with type set to
* VAEncPackedHeaderType::VAEncPackedHeaderPicture ;
* - a #VAEncPackedHeaderDataBuffer which holds the actual packed
* header data.
*
* If \c pic_scaling_matrix_present_flag is set to \c 1, then a
* #VAIQMatrixBufferH264 buffer shall also be provided within the same
* \c vaRenderPicture() call as this picture parameter buffer.
*/
typedef struct _VAEncPictureParameterBufferH264 {
/**
* \brief Information about the picture to be encoded.
*
* See #VAPictureH264 for further description of each field.
* Note that CurrPic.picture_id represents the reconstructed
* (decoded) picture. User provides a scratch VA surface ID here.
*/
VAPictureH264 CurrPic;
/**
* \brief Decoded Picture Buffer (DPB).
*
* This array represents the list of reconstructed (decoded)
* frames used as reference. It is important to keep track of
* reconstructed frames so that they can be used later on as
* reference for P or B-frames encoding.
*/
VAPictureH264 ReferenceFrames[16];
/**
* \brief Output encoded bitstream.
*
* \ref coded_buf has type #VAEncCodedBufferType. It should be
* large enough to hold the compressed NAL slice and possibly SPS
* and PPS NAL units.
*/
VABufferID coded_buf;
 
/** \brief The picture parameter set referred to in the slice header. */
unsigned char pic_parameter_set_id;
/** \brief The active sequence parameter set. Range: 0 to 31, inclusive. */
unsigned char seq_parameter_set_id;
 
/**
* \brief OR'd flags describing whether the picture is the last one or not.
*
* This fields holds 0 if the picture to be encoded is not the last
* one in the stream or sequence. Otherwise, it is a combination of
* \ref H264_LAST_PICTURE_EOSEQ or \ref H264_LAST_PICTURE_EOSTREAM.
*/
unsigned char last_picture;
 
/** \brief The picture identifier.
* Range: 0 to \f$2^{log2\_max\_frame\_num\_minus4 + 4} - 1\f$, inclusive.
*/
unsigned short frame_num;
 
/** \brief \c pic_init_qp_minus26 + 26. */
unsigned char pic_init_qp;
/** \brief Maximum reference index for reference picture list 0.
* Range: 0 to 31, inclusive.
*/
unsigned char num_ref_idx_l0_active_minus1;
/** \brief Maximum reference index for reference picture list 1.
* Range: 0 to 31, inclusive.
*/
unsigned char num_ref_idx_l1_active_minus1;
 
/** \brief Range: -12 to 12, inclusive. */
signed char chroma_qp_index_offset;
/** \brief Range: -12 to 12, inclusive. */
signed char second_chroma_qp_index_offset;
 
union {
struct {
/** \brief Is picture an IDR picture? */
unsigned int idr_pic_flag : 1;
/** \brief Is picture a reference picture? */
unsigned int reference_pic_flag : 2;
/** \brief Selects CAVLC (0) or CABAC (1) entropy coding mode. */
unsigned int entropy_coding_mode_flag : 1;
/** \brief Is weighted prediction applied to P slices? */
unsigned int weighted_pred_flag : 1;
/** \brief Range: 0 to 2, inclusive. */
unsigned int weighted_bipred_idc : 2;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int constrained_intra_pred_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int transform_8x8_mode_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int deblocking_filter_control_present_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int redundant_pic_cnt_present_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int pic_order_present_flag : 1;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned int pic_scaling_matrix_present_flag : 1;
} bits;
unsigned int value;
} pic_fields;
} VAEncPictureParameterBufferH264;
 
/**
* \brief Slice parameter for H.264 encoding in baseline, main & high profiles.
*
* This structure holds information for \c
* slice_layer_without_partitioning_rbsp() as defined by the H.264
* specification.
*
* If packed slice headers mode is used, i.e. if the encoding
* pipeline was configured with the #VA_ENC_PACKED_HEADER_SLICE
* flag, then the driver expects two more buffers to be provided to
* the same \c vaRenderPicture() as this buffer:
* - a #VAEncPackedHeaderParameterBuffer with type set to
* VAEncPackedHeaderType::VAEncPackedHeaderSlice ;
* - a #VAEncPackedHeaderDataBuffer which holds the actual packed
* header data.
*
* If per-macroblock encoder configuration is needed, \c macroblock_info
* references a buffer of type #VAEncMacroblockParameterBufferH264. This
* buffer is not passed to vaRenderPicture(). i.e. it is not destroyed
* by subsequent calls to vaRenderPicture() and then can be re-used
* without re-allocating the whole buffer.
*/
typedef struct _VAEncSliceParameterBufferH264 {
/** \brief Starting MB address for this slice. */
unsigned int macroblock_address;
/** \brief Number of macroblocks in this slice. */
unsigned int num_macroblocks;
/**
* \brief Per-MB encoder configuration buffer, or \c VA_INVALID_ID.
*
* If per-MB encoder configuration is needed, then \ref macroblock_info
* references a buffer of type #VAEncMacroblockParameterBufferH264
* (\c VAEncMacroblockParameterBufferType). Otherwise, buffer id
* is set to \c VA_INVALID_ID and per-MB configuration is derived
* from this slice parameter.
*
* The \c macroblock_info buffer must hold \ref num_macroblocks
* elements.
*/
VABufferID macroblock_info;
/** \brief Slice type.
* Range: 0..2, 5..7, i.e. no switching slices.
*/
unsigned char slice_type;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char pic_parameter_set_id;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned short idr_pic_id;
 
/** @name If pic_order_cnt_type == 0 */
/**@{*/
/** \brief The picture order count modulo MaxPicOrderCntLsb. */
unsigned short pic_order_cnt_lsb;
/** \brief Valid if \c pic_order_present_flag and this is a bottom field. */
int delta_pic_order_cnt_bottom;
/**@}*/
/** @name If pic_order_cnt_type == 1 && !delta_pic_order_always_zero_flag */
/**@{*/
/** \brief [0]: top, [1]: bottom. */
int delta_pic_order_cnt[2];
/**@}*/
 
/** @name If slice_type == B */
/**@{*/
unsigned char direct_spatial_mv_pred_flag;
/**@}*/
 
/** @name If slice_type == P */
/**@{*/
/** \brief Specifies if
* \ref _VAEncPictureParameterBufferH264::num_ref_idx_l0_active_minus1 or
* \ref _VAEncPictureParameterBufferH264::num_ref_idx_l1_active_minus1 are
* overriden by the values for this slice.
*/
unsigned char num_ref_idx_active_override_flag;
/** \brief Maximum reference index for reference picture list 0.
* Range: 0 to 31, inclusive.
*/
unsigned char num_ref_idx_l0_active_minus1;
/** \brief Maximum reference index for reference picture list 1.
* Range: 0 to 31, inclusive.
*/
unsigned char num_ref_idx_l1_active_minus1;
/** \brief Reference picture list 0 (for P slices). */
VAPictureH264 RefPicList0[32];
/** \brief Reference picture list 1 (for B slices). */
VAPictureH264 RefPicList1[32];
/**@}*/
 
/** @name pred_weight_table() */
/**@{*/
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char luma_log2_weight_denom;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char chroma_log2_weight_denom;
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char luma_weight_l0_flag;
/** \brief Same as the H.264 bitstream syntax element. */
signed short luma_weight_l0[32];
/** \brief Same as the H.264 bitstream syntax element. */
signed short luma_offset_l0[32];
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char chroma_weight_l0_flag;
/** \brief Same as the H.264 bitstream syntax element. */
signed short chroma_weight_l0[32][2];
/** \brief Same as the H.264 bitstream syntax element. */
signed short chroma_offset_l0[32][2];
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char luma_weight_l1_flag;
/** \brief Same as the H.264 bitstream syntax element. */
signed short luma_weight_l1[32];
/** \brief Same as the H.264 bitstream syntax element. */
signed short luma_offset_l1[32];
/** \brief Same as the H.264 bitstream syntax element. */
unsigned char chroma_weight_l1_flag;
/** \brief Same as the H.264 bitstream syntax element. */
signed short chroma_weight_l1[32][2];
/** \brief Same as the H.264 bitstream syntax element. */
signed short chroma_offset_l1[32][2];
/**@}*/
 
/** \brief Range: 0 to 2, inclusive. */
unsigned char cabac_init_idc;
/** \brief Same as the H.264 bitstream syntax element. */
signed char slice_qp_delta;
/** @name If deblocking_filter_control_present_flag */
/**@{*/
/** \brief Range: 0 to 2, inclusive. */
unsigned char disable_deblocking_filter_idc;
/** \brief Same as the H.264 bitstream syntax element. */
signed char slice_alpha_c0_offset_div2;
/** \brief Same as the H.264 bitstream syntax element. */
signed char slice_beta_offset_div2;
/**@}*/
} VAEncSliceParameterBufferH264;
 
/**
* @name Macroblock neighbour availability bits
*
* \anchor api_enc_h264_mb_pred_avail_bits
* Definitions for macroblock neighbour availability bits used in
* intra prediction mode (non MBAFF only).
*
* @{
*/
/** \brief References macroblock in the top-left corner. */
#define VA_MB_PRED_AVAIL_TOP_LEFT (1 << 2)
/** \brief References macroblock above the current macroblock. */
#define VA_MB_PRED_AVAIL_TOP (1 << 4)
/** \brief References macroblock in the top-right corner. */
#define VA_MB_PRED_AVAIL_TOP_RIGHT (1 << 3)
/** \brief References macroblock on the left of the current macroblock. */
#define VA_MB_PRED_AVAIL_LEFT (1 << 6)
/**@}*/
 
/**
* \brief Macroblock parameter for H.264 encoding in baseline, main & high
* profiles.
*
* This structure holds per-macroblock information. The buffer must be
* allocated with as many elements (macroblocks) as necessary to fit
* the slice to be encoded. Besides, the per-macroblock records must
* be written in a strict raster order and with no gap. i.e. every
* macroblock, regardless of its type, shall have an entry.
*/
typedef struct _VAEncMacroblockParameterBufferH264 {
/**
* \brief Quantization parameter.
*
* Requested quantization parameter. Range: 0 to 51, inclusive.
* If \ref qp is set to 0xff, then the actual value is derived
* from the slice-level value: \c pic_init_qp + \c slice_qp_delta.
*/
unsigned char qp;
 
union {
/** @name Data for intra macroblock */
/**@{*/
struct {
union {
/**
* \brief Flag specified to override MB neighbour
* availability bits from VME stage.
*
* This flag specifies that macroblock neighbour
* availability bits from the VME stage are overriden
* by the \ref pred_avail_flags hereunder.
*/
unsigned int pred_avail_override_flag : 1;
/**
* \brief Bitwise representation of which macroblocks
* are available for intra prediction.
*
* If the slice is intra-coded, this field represents
* the macroblocks available for intra prediction.
* See \ref api_enc_h264_mb_pred_avail_bits
* "macroblock neighbour availability" bit definitions.
*/
unsigned int pred_avail_flags : 8;
} bits;
unsigned int value;
} intra_fields;
/**@}*/
 
/** @name Data for inter macroblock */
/**@{*/
struct {
union {
} bits;
unsigned int value;
} inter_fields;
/**@}*/
} info;
} VAEncMacroblockParameterBufferH264;
 
/**@}*/
 
#ifdef __cplusplus
}
#endif
 
#endif /* VA_ENC_H264_H */