Subversion Repositories Kolibri OS

Compare Revisions

Regard whitespace Rev 2465 → Rev 2466

/kernel/trunk/boot/bootcode.inc
387,7 → 387,7
 
push 0
pop es
and word [es:0x9031], 0
and word [es:BOOT_IDE_BASE_ADDR], 0
; \begin{Mario79}
; find HDD IDE DMA PCI device
; check for PCI BIOS
424,7 → 424,7
int 0x1A
jc .nopci
and cx, 0xFFF0 ; clear address decode type
mov [es:0x9031], cx
mov [es:BOOT_IDE_BASE_ADDR], cx
.nopci:
; \end{Mario79}
 
456,7 → 456,7
loopnz @b
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; --------------- APM ---------------------
and word [es:0x9044], 0 ; ver = 0.0 (APM not found)
and word [es:BOOT_APM_VERSION], 0 ; ver = 0.0 (APM not found)
mov ax, 0x5300
xor bx, bx
int 0x15
463,8 → 463,8
jc apm_end ; APM not found
test cx, 2
jz apm_end ; APM 32-bit protected-mode interface not supported
mov [es:0x9044], ax ; Save APM Version
mov [es:0x9046], cx ; Save APM flags
mov [es:BOOT_APM_VERSION], ax ; Save APM Version
mov [es:BOOT_APM_FLAGS], cx ; Save APM flags
 
; Write APM ver ----
and ax, 0xf0f
483,10 → 483,10
xor bx, bx
int 0x15
 
mov [es:0x9040], ebx
mov [es:0x9050], ax
mov [es:0x9052], cx
mov [es:0x9054], dx
mov [es:BOOT_APM_ENTRY], ebx
mov [es:BOOT_APM_CODE_32], ax
mov [es:BOOT_APM_CODE_16], cx
mov [es:BOOT_APM_DATA_16], dx
 
apm_end:
_setcursor d80x25_top_num, 0
947,18 → 947,17
 
; GRAPHICS ACCELERATION
; force yes
mov [es:0x901C], byte 1
mov [es:BOOT_MTRR], byte 1
 
; DMA ACCESS TO HD
 
mov al, [preboot_dma]
mov [es:0x901F], al
mov [es:BOOT_DMA], al
 
;; VRR_M USE
;
; mov al,[preboot_vrrm]
; mov [es:0x9030], al
mov [es:0x901E], byte 1
 
; BOOT DEVICE
 
1337,7 → 1336,7
xor ax, ax
mov es, ax
 
mov ax, [es:0x9008] ; vga & 320x200
mov ax, [es:BOOT_VESA_MODE] ; vga & 320x200
mov bx, ax
cmp ax, 0x13
je setgr
/kernel/trunk/boot/bootvesa.inc
726,9 → 726,9
mov bx, word [es:si+2] ; resolution Y
 
 
mov word [es:0x900A], ax ; resolution X
mov word [es:0x900C], bx ; resolution Y
mov word [es:0x9008], cx ; number of mode
mov word [es:BOOT_X_RES], ax ; resolution X
mov word [es:BOOT_Y_RES], bx ; resolution Y
mov word [es:BOOT_VESA_MODE], cx ; number of mode
 
cmp cx, 0x12
je .mode0x12_0x13
747,11 → 747,11
int 0x10
; LFB
mov eax, [es:mi.PhysBasePtr];di+0x28]
mov [es:0x9018], eax
mov [es:BOOT_LFB], eax
; ---- vbe voodoo
BytesPerLine equ 0x10
mov ax, [es:di+BytesPerLine]
mov [es:0x9001], ax
mov [es:BOOT_PITCH], ax
; BPP
cmp [es:mi.BitsPerPixel], 16
jne .l0
760,12 → 760,12
mov [es:mi.BitsPerPixel], 15
.l0:
mov al, byte [es:di+0x19]
mov [es:0x9000], al
mov [es:BOOT_BPP], al
jmp .exit
 
.mode0x12_0x13:
mov byte [es:0x9000], 32
or dword [es:0x9018], 0xFFFFFFFF; 0x800000
mov byte [es:BOOT_BPP], 32
or dword [es:BOOT_LFB], 0xFFFFFFFF; 0x800000
 
 
; VESA 1.2 PM BANK SWITCH ADDRESS
788,10 → 788,6
.exit:
ret
 
 
; mov dword[es:0x9018],0x000A0000
; ret
 
;=============================================================================
;=============================================================================
;=============================================================================
/kernel/trunk/const.inc
363,22 → 363,30
 
;;;;;;;;;;;boot time variables
 
;BOOT_BPP equ 0x9000 ;byte bits per pixel
BOOT_SCANLINE equ 0x9001 ;word scanline length
BOOT_BPP equ 0x9000 ;byte bits per pixel
BOOT_PITCH equ 0x9001 ;word scanline length
BOOT_VESA_MODE equ 0x9008 ;word vesa video mode
;;BOOT_X_RES equ 0x900A ;word X res
;;BOOT_Y_RES equ 0x900C ;word Y res
BOOT_X_RES equ 0x900A ;word X res
BOOT_Y_RES equ 0x900C ;word Y res
;;BOOT_MOUSE_PORT equ 0x9010 ;byte mouse port - not used
BOOT_BANK_SW equ 0x9014 ;dword Vesa 1.2 pm bank switch
BOOT_LFB equ 0x9018 ;dword Vesa 2.0 LFB address
BOOT_MTRR equ 0x901C ;byte 0 or 1 : enable MTRR graphics acceleration
BOOT_LOG equ 0x901D ;byte not used anymore (0 or 1 : enable system log display)
BOOT_DIRECT_LFB equ 0x901E ;byte 0 or 1 : enable direct lfb write, paging disabled
;BOOT_DIRECT_LFB equ 0x901E ;byte 0 or 1 : enable direct lfb write, paging disabled
BOOT_DMA equ 0x901F ;
BOOT_PCI_DATA equ 0x9020 ;8bytes pci data
BOOT_VRR equ 0x9030 ;byte VRR start enabled 1, 2-no
BOOT_IDE_BASE_ADDR equ 0x9031 ;word IDEContrRegsBaseAddr
BOOT_MEM_AMOUNT equ 0x9034 ;dword memory amount
 
BOOT_APM_ENTRY equ 0x9040
BOOT_APM_VERSION equ 0x9044
BOOT_APM_FLAGS equ 0x9046 ;unused
BOOT_APM_CODE_32 equ 0x9050
BOOT_APM_CODE_16 equ 0x9052
BOOT_APM_DATA_16 equ 0x9054
 
TMP_FILE_NAME equ 0
TMP_CMD_LINE equ 1024
TMP_ICON_OFFS equ 1280
/kernel/trunk/core/memory.inc
358,7 → 358,7
 
cmp dword [LFBAddress], -1
jne @f
mov [BOOT_VAR+0x901c], byte 2
mov [BOOT_VAR+BOOT_MTRR], byte 2
; max VGA=640*480*4=1228800 bytes
; + 32*640*4=81920 bytes for mouse pointer
stdcall alloc_pages, ((1228800+81920)/4096)
378,7 → 378,7
@@:
test [SCR_MODE], word 0100000000000000b
jnz @f
mov [BOOT_VAR+0x901c], byte 2
mov [BOOT_VAR+BOOT_MTRR], byte 2
ret
@@:
call init_mtrr
1364,7 → 1364,7
align 4
proc init_mtrr
 
cmp [BOOT_VAR+0x901c], byte 2
cmp [BOOT_VAR+BOOT_MTRR], byte 2
je .exit
 
bt [cpu_caps], CAPS_MTRR
1554,3 → 1554,27
.fail:
ret
endp
 
 
align 4
proc print_mem
mov edi, BOOT_VAR + 0x9104
mov ecx, [edi-4]
test ecx, ecx
jz .done
 
@@:
mov eax, [edi]
mov edx, [edi+4]
add eax, [edi+8]
adc edx, [edi+12]
 
DEBUGF 1, "K : E820 %x%x - %x%x type %d\n", \
[edi+4], [edi],\
edx, eax, [edi+16]
add edi, 20
dec ecx
jnz @b
.done:
ret
endp
/kernel/trunk/detect/biosmem.inc
23,8 → 23,8
cmp eax, 0x534D4150
jnz no_E820
e820_mem_loop:
cmp byte [di+16], 1 ; ignore non-free areas
jnz e820_mem_next
; cmp byte [di+16], 1 ; ignore non-free areas
; jnz e820_mem_next
inc byte [0x9100]
add di, 20
e820_mem_next:
/kernel/trunk/init.inc
55,6 → 55,9
.calcmax:
; round all to pages
mov eax, [edi]
cmp [edi+16], byte 1
jne .unusable
 
test eax, 0xFFF
jz @f
neg eax
87,7 → 90,7
add esi, eax
jmp .usable
.unusable:
and dword [edi+8], 0
; and dword [edi+8], 0
.usable:
add edi, 20
loop .calcmax
195,6 → 198,9
mov ebx, BOOT_VAR-OS_BASE + 0x9104
mov edx, [ebx-4]
.scanmap:
cmp [ebx+16], byte 1
jne .next
 
mov ecx, [ebx+8]
shr ecx, 12; ecx = number of pages
jz .next
/kernel/trunk/kernel.asm
333,17 → 333,17
call mutex_init
 
; SAVE REAL MODE VARIABLES
mov ax, [BOOT_VAR + 0x9031]
mov ax, [BOOT_VAR + BOOT_IDE_BASE_ADDR]
mov [IDEContrRegsBaseAddr], ax
; --------------- APM ---------------------
 
; init selectors
mov ebx, [BOOT_VAR+0x9040] ; offset of APM entry point
movzx eax, word [BOOT_VAR+0x9050]; real-mode segment base address of
mov ebx, [BOOT_VAR+BOOT_APM_ENTRY] ; offset of APM entry point
movzx eax, word [BOOT_VAR+BOOT_APM_CODE_32] ; real-mode segment base address of
; protected-mode 32-bit code segment
movzx ecx, word [BOOT_VAR+0x9052]; real-mode segment base address of
movzx ecx, word [BOOT_VAR+BOOT_APM_CODE_16]; real-mode segment base address of
; protected-mode 16-bit code segment
movzx edx, word [BOOT_VAR+0x9054]; real-mode segment base address of
movzx edx, word [BOOT_VAR+BOOT_APM_DATA_16]; real-mode segment base address of
; protected-mode 16-bit data segment
 
shl eax, 4
364,30 → 364,28
mov dword[apm_entry], ebx
mov word [apm_entry + 4], apm_code_32 - gdts
 
mov eax, [BOOT_VAR + 0x9044]; version & flags
mov eax, [BOOT_VAR + BOOT_APM_VERSION] ; version & flags
mov [apm_vf], eax
; -----------------------------------------
; movzx eax,byte [BOOT_VAR+0x9010] ; mouse port
; mov [0xF604],byte 1 ;al
mov al, [BOOT_VAR+0x901F] ; DMA access
mov al, [BOOT_VAR+BOOT_DMA] ; DMA access
mov [allow_dma_access], al
movzx eax, byte [BOOT_VAR+0x9000] ; bpp
movzx eax, byte [BOOT_VAR+BOOT_BPP] ; bpp
mov [ScreenBPP], al
 
mov [_display.bpp], eax
mov [_display.vrefresh], 60
 
movzx eax, word [BOOT_VAR+0x900A]; X max
movzx eax, word [BOOT_VAR+BOOT_X_RES]; X max
mov [_display.width], eax
dec eax
mov [Screen_Max_X], eax
mov [screen_workarea.right], eax
movzx eax, word [BOOT_VAR+0x900C]; Y max
movzx eax, word [BOOT_VAR+BOOT_Y_RES]; Y max
mov [_display.height], eax
dec eax
mov [Screen_Max_Y], eax
mov [screen_workarea.bottom], eax
movzx eax, word [BOOT_VAR+0x9008]; screen mode
movzx eax, word [BOOT_VAR+BOOT_VESA_MODE]; screen mode
mov [SCR_MODE], eax
; mov eax, [BOOT_VAR+0x9014] ; Vesa 1.2 bnk sw add
; mov [BANK_SWITCH], eax
396,7 → 394,7
je @f
cmp [SCR_MODE], word 0x12 ; VGA 640x480
je @f
movzx eax, word[BOOT_VAR+0x9001] ; for other modes
movzx eax, word[BOOT_VAR+BOOT_PITCH] ; for other modes
mov [BytesPerScanLine], ax
mov [_display.pitch], eax
@@:
414,8 → 412,7
 
; GRAPHICS ADDRESSES
 
and byte [BOOT_VAR+0x901e], 0x0
mov eax, [BOOT_VAR+0x9018]
mov eax, [BOOT_VAR+BOOT_LFB]
mov [LFBAddress], eax
 
cmp [SCR_MODE], word 0100000000000000b
1148,10 → 1145,10
loop .fl60
push eax
 
mov ax, [BOOT_VAR+0x900c]
mov ax, [BOOT_VAR+BOOT_Y_RES]
shr ax, 1
shl eax, 16
mov ax, [BOOT_VAR+0x900A]
mov ax, [BOOT_VAR+BOOT_X_RES]
shr ax, 1
mov [MOUSE_X], eax
 
/kernel/trunk/sec_loader/trunk/kolibri_ldm/bootvesa.inc
688,9 → 688,9
mov bx, word [es:si+2] ; resolution Y
 
 
mov word [es:0x900A], ax ; resolution X
mov word [es:0x900C], bx ; resolution Y
mov word [es:0x9008], cx ; number of mode
mov word [es:BOOT_X_RES], ax ; resolution X
mov word [es:BOOT_Y_RES], bx ; resolution Y
mov word [es:BOOT_VESA_MODE], cx ; number of mode
 
cmp cx, 0x12
je .mode0x12_0x13
709,11 → 709,11
int 0x10
; LFB
mov eax, [es:mi.PhysBasePtr];di+0x28]
mov [es:0x9018], eax
mov [es:BOOT_LFB], eax
; ---- vbe voodoo
BytesPerLine equ 0x10
mov ax, [es:di+BytesPerLine]
mov [es:0x9001], ax
mov [es:BOOT_PITCH], ax
; BPP
cmp [es:mi.BitsPerPixel], 16
jne .l0
722,12 → 722,12
mov [es:mi.BitsPerPixel], 15
.l0:
mov al, byte [es:di+0x19]
mov [es:0x9000], al
mov [es:BOOT_BPP], al
jmp .exit
 
.mode0x12_0x13:
mov byte [es:0x9000], 32
or dword [es:0x9018], 0xFFFFFFFF; 0x800000
mov byte [es:BOOT_BPP], 32
or dword [es:BOOT_LFB], 0xFFFFFFFF; 0x800000
 
 
; VESA 1.2 PM BANK SWITCH ADDRESS
753,9 → 753,6
ret
 
 
; mov dword[es:0x9018],0x000A0000
; ret
 
;=============================================================================
;=============================================================================
;=============================================================================
/kernel/trunk/sec_loader/trunk/kolibri_ldm/kolibri_ldm.asm
157,7 → 157,7
 
push 0
pop es
and word [es:0x9031], 0
and word [es:BOOT_IDE_BASE_ADDR], 0
; \begin{Mario79}
; find HDD IDE DMA PCI device
; check for PCI BIOS
194,7 → 194,7
int 0x1A
jc .nopci
and cx, 0xFFF0 ; clear address decode type
mov [es:0x9031], cx
mov [es:BOOT_IDE_BASE_ADDR], cx
.nopci:
; \end{Mario79}
 
226,7 → 226,7
loopnz @b
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; --------------- APM ---------------------
and word [es:0x9044], 0 ; ver = 0.0 (APM not found)
and word [es:BOOT_APM_VERSION], 0 ; ver = 0.0 (APM not found)
mov ax, 0x5300
xor bx, bx
int 0x15
233,8 → 233,8
jc apm_end ; APM not found
test cx, 2
jz apm_end ; APM 32-bit protected-mode interface not supported
mov [es:0x9044], ax ; Save APM Version
mov [es:0x9046], cx ; Save APM flags
mov [es:BOOT_APM_VERSION], ax ; Save APM Version
mov [es:BOOT_APM_FLAGS], cx ; Save APM flags
 
; Write APM ver ----
and ax, 0xf0f
253,10 → 253,10
xor bx, bx
int 0x15
 
mov [es:0x9040], ebx
mov [es:0x9050], ax
mov [es:0x9052], cx
mov [es:0x9054], dx
mov [es:BOOT_APM_ENTRY], ebx
mov [es:BOOT_APM_CODE_32], ax
mov [es:BOOT_APM_CODE_16], cx
mov [es:BOOT_APM_DATA_16], dx
 
apm_end:
_setcursor d80x25_top_num, 0
670,18 → 670,17
 
; GRAPHICS ACCELERATION
; force yes
mov [es:0x901C], byte 1
mov [es:BOOT_MTRR], byte 1
 
; DMA ACCESS TO HD
 
mov al, [preboot_dma]
mov [es:0x901F], al
mov [es:BOOT_DMA], al
 
; VRR_M USE
 
mov al, [preboot_vrrm]
mov [es:0x9030], al
mov [es:0x901E], byte 1
; mov al, [preboot_vrrm]
; mov [es:0x9030], al
 
; BOOT DEVICE
 
698,7 → 697,7
xor ax, ax
mov es, ax
 
mov ax, [es:0x9008] ; vga & 320x200
mov ax, [es:BOOT_VESA_MODE] ; vga & 320x200
mov bx, ax
cmp ax, 0x13
je setgr