Subversion Repositories Kolibri OS

Compare Revisions

Regard whitespace Rev 6724 → Rev 6725

/programs/fs/unzip60/flexos/Contents
0,0 → 1,8
Contents of the "flexos" subdirectory for UnZip 5.32 and later:
 
Contents this file
README notes about limitations and assumptions of the FlexOS port
flexos.c OS-dependent UnZip routines for FlexOS
flxcfg.h OS-dependent configuration, included by unzpriv.h
hc.pro profile for MetaWare High C
makefile makefile for MetaWare High C, PAMAKE
/programs/fs/unzip60/flexos/README
0,0 → 1,39
This should be considered an initial port - there will probably be some
bugs and non-functioning features.
 
The only functionality that has had any real testing is "unzip filename",
anything else is basically untested.
 
This has been cross-compiled from DOS using Metaware's High C compiler
and the DOS version of pamake (v3.0). It should compile with the FlexOS
hosted version of HighC, and the makefile could be converted to work
with the native FlexOS make.
 
The following considerations apply:
 
)Compiled against and linked with portlib.
)Used on FlexOS 286 v2.32
)Volume labels are not supported - this is due to the way FlexOS decides
if a drive has case-sensitive filenames based upon the contents of the
volume label.
)No special handling for case-sensitive media (see above).
)Not using the PORTLIB wildarg routine (i.e., UnZip does its own globbing).
)Based upon the MSDOS port.
)Filenames are in FAT format.
)The current version of getch is a cheat (simply using getchar()). I
should interrogate stdin and if it's a FlexOS console use special code
to turn off echo and just read one char.
)Only the basic MSDOS FAT file attributes are saved/restored. There is
currently no support for the FlexOS extended file attributes.
)There is some code that should attempt to do the correct thing when a
pathspec with a logical name definition is used (e.g., "system:path/to/it");
however it again has not been stress-tested.
)There is no special handling for floppy drives, there probably should
be.
)The dateformat is compiled in as DMY (shoot me I'm British), I'm not
sure if there is actually a way to get locale info.
)The assembler speedups haven't yet been ported to ASM86 (should simply
be a change of syntax)
 
--
D.Fawcus 17 July 1997
/programs/fs/unzip60/flexos/flexos.c
0,0 → 1,936
/*
Copyright (c) 1990-2007 Info-ZIP. All rights reserved.
 
See the accompanying file LICENSE, version 2000-Apr-09 or later
(the contents of which are also included in unzip.h) for terms of use.
If, for some reason, all these files are missing, the Info-ZIP license
also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html
*/
/*---------------------------------------------------------------------------
 
flexos.c
 
FlexOS-specific routines for use with Info-ZIP's UnZip 5.2 and later.
 
Based upon the MSDOS version of this file (msdos/msdos.c)
 
Contains: do_wild()
mapattr()
mapname()
map2fat()
checkdir()
close_outfile()
dateformat()
version()
_wildarg()
 
---------------------------------------------------------------------------*/
 
 
 
#define UNZIP_INTERNAL
#include "unzip.h"
 
#include <flexif.h>
 
/* The following should really be a static declaration, but the compiler
complains (crappy compiler can't cope with a static forward declaration).
*/
extern void map2fat OF((char *pathcomp, char *last_dot));
 
static int created_dir; /* used by mapname(), checkdir() */
static int renamed_fullpath; /* ditto */
 
/*****************************/
/* Strings used in flexos.c */
/*****************************/
 
#ifndef SFX
static ZCONST char Far CantAllocateWildcard[] =
"warning: cannot allocate wildcard buffers\n";
#endif
static ZCONST char Far WarnDirTraversSkip[] =
"warning: skipped \"../\" path component(s) in %s\n";
static ZCONST char Far Creating[] = " creating: %s\n";
static ZCONST char Far ConversionFailed[] =
"mapname: conversion of %s failed\n";
static ZCONST char Far PathTooLong[] = "checkdir error: path too long: %s\n";
static ZCONST char Far CantCreateDir[] = "checkdir error: cannot create %s\n\
unable to process %s.\n";
static ZCONST char Far DirIsntDirectory[] =
"checkdir error: %s exists but is not directory\n\
unable to process %s.\n";
static ZCONST char Far PathTooLongTrunc[] =
"checkdir warning: path too long; truncating\n %s\n\
-> %s\n";
#if (!defined(SFX) || defined(SFX_EXDIR))
static ZCONST char Far CantCreateExtractDir[] =
"checkdir: cannot create extraction directory: %s\n";
#endif
 
#include <dirent.h>
 
#ifndef SFX
 
/************************/
/* Function do_wild() */ /* identical to OS/2 version */
/************************/
 
char *do_wild(__G__ wildspec)
__GDEF
ZCONST char *wildspec; /* only used first time on a given dir */
{
static DIR *wild_dir = (DIR *)NULL;
static ZCONST char *wildname;
static char *dirname, matchname[FILNAMSIZ];
static int notfirstcall=FALSE, have_dirname, dirnamelen;
char *fnamestart;
struct dirent *file;
 
/* Even when we're just returning wildspec, we *always* do so in
* matchname[]--calling routine is allowed to append four characters
* to the returned string, and wildspec may be a pointer to argv[].
*/
if (!notfirstcall) { /* first call: must initialize everything */
notfirstcall = TRUE;
 
if (!iswild(wildspec)) {
strncpy(matchname, wildspec, FILNAMSIZ);
matchname[FILNAMSIZ-1] = '\0';
have_dirname = FALSE;
dir = NULL;
return matchname;
}
 
/* break the wildspec into a directory part and a wildcard filename */
if ((wildname = strrchr(wildspec, '/')) == (ZCONST char *)NULL &&
(wildname = strrchr(wildspec, ':')) == (ZCONST char *)NULL) {
dirname = ".";
dirnamelen = 1;
have_dirname = FALSE;
wildname = wildspec;
} else {
++wildname; /* point at character after '/' or ':' */
dirnamelen = (int)(wildname - wildspec);
if ((dirname = (char *)malloc(dirnamelen+1)) == (char *)NULL) {
Info(slide, 1, ((char *)slide,
LoadFarString(CantAllocateWildcard)));
strncpy(matchname, wildspec, FILNAMSIZ);
matchname[FILNAMSIZ-1] = '\0';
return matchname; /* but maybe filespec was not a wildcard */
}
/* GRR: cannot strip trailing char for opendir since might be "d:/" or "d:"
* (would have to check for "./" at end--let opendir handle it instead) */
strncpy(dirname, wildspec, dirnamelen);
dirname[dirnamelen] = '\0'; /* terminate for strcpy below */
have_dirname = TRUE;
}
Trace((stderr, "do_wild: dirname = [%s]\n", FnFilter1(dirname)));
 
if ((wild_dir = opendir(dirname)) != (DIR *)NULL) {
if (have_dirname) {
strcpy(matchname, dirname);
fnamestart = matchname + dirnamelen;
} else
fnamestart = matchname;
while ((file = readdir(wild_dir)) != (struct dirent *)NULL) {
Trace((stderr, "do_wild: readdir returns %s\n",
FnFilter1(file->d_name)));
strcpy(fnamestart, file->d_name);
if (strrchr(fnamestart, '.') == (char *)NULL)
strcat(fnamestart, ".");
if (match(fnamestart, wildname, 1 WISEP) && /* 1=ignore case */
/* skip "." and ".." directory entries */
strcmp(fnamestart, ".") && strcmp(fnamestart, "..")) {
Trace((stderr, "do_wild: match() succeeds\n"));
/* remove trailing dot */
fnamestart += strlen(fnamestart) - 1;
if (*fnamestart == '.')
*fnamestart = '\0';
return matchname;
}
}
/* if we get to here directory is exhausted, so close it */
closedir(wild_dir);
wild_dir = (DIR *)NULL;
}
#ifdef DEBUG
else {
Trace((stderr, "do_wild: opendir(%s) returns NULL\n",
FnFilter1(dirname)));
}
#endif /* DEBUG */
 
/* return the raw wildspec in case that works (e.g., directory not
* searchable, but filespec was not wild and file is readable) */
strncpy(matchname, wildspec, FILNAMSIZ);
matchname[FILNAMSIZ-1] = '\0';
return matchname;
}
 
/* last time through, might have failed opendir but returned raw wildspec */
if (wild_dir == (DIR *)NULL) {
notfirstcall = FALSE; /* nothing left to try--reset for new wildspec */
if (have_dirname)
free(dirname);
return (char *)NULL;
}
 
/* If we've gotten this far, we've read and matched at least one entry
* successfully (in a previous call), so dirname has been copied into
* matchname already.
*/
if (have_dirname) {
/* strcpy(matchname, dirname); */
fnamestart = matchname + dirnamelen;
} else
fnamestart = matchname;
while ((file = readdir(wild_dir)) != (struct dirent *)NULL) {
Trace((stderr, "do_wild: readdir returns %s\n",
FnFilter1(file->d_name)));
strcpy(fnamestart, file->d_name);
if (strrchr(fnamestart, '.') == (char *)NULL)
strcat(fnamestart, ".");
if (match(fnamestart, wildname, 1 WISEP)) { /* 1 == ignore case */
Trace((stderr, "do_wild: match() succeeds\n"));
/* remove trailing dot */
fnamestart += strlen(fnamestart) - 1;
if (*fnamestart == '.')
*fnamestart = '\0';
return matchname;
}
}
 
closedir(wild_dir); /* have read at least one entry; nothing left */
wild_dir = (DIR *)NULL;
notfirstcall = FALSE; /* reset for new wildspec */
if (have_dirname)
free(dirname);
return (char *)NULL;
 
} /* end function do_wild() */
 
#endif /* !SFX */
 
 
 
/**********************/
/* Function mapattr() */
/**********************/
 
int mapattr(__G)
__GDEF
{
/* set archive bit (file is not backed up): */
G.pInfo->file_attr = (unsigned)(G.crec.external_file_attributes & 7) | 32;
return 0;
}
 
 
 
/**********************/
/* Function mapname() */
/**********************/
 
int mapname(__G__ renamed)
__GDEF
int renamed;
/*
* returns:
* MPN_OK - no problem detected
* MPN_INF_TRUNC - caution (truncated filename)
* MPN_INF_SKIP - info "skip entry" (dir doesn't exist)
* MPN_ERR_SKIP - error -> skip entry
* MPN_ERR_TOOLONG - error -> path is too long
* MPN_NOMEM - error (memory allocation failed) -> skip entry
* [also MPN_VOL_LABEL, MPN_CREATED_DIR]
*/
{
char pathcomp[FILNAMSIZ]; /* path-component buffer */
char *pp, *cp=(char *)NULL; /* character pointers */
char *lastsemi=(char *)NULL; /* pointer to last semi-colon in pathcomp */
char *last_dot=(char *)NULL; /* last dot not converted to underscore */
int dotname = FALSE; /* path component begins with dot? */
int killed_ddot = FALSE; /* is set when skipping "../" pathcomp */
int error = MPN_OK;
register unsigned workch; /* hold the character being tested */
 
 
if (G.pInfo->vollabel)
return MPN_VOL_LABEL; /* Cannot set disk volume labels in FlexOS */
 
/*---------------------------------------------------------------------------
Initialize various pointers and counters and stuff.
---------------------------------------------------------------------------*/
 
/* can create path as long as not just freshening, or if user told us */
G.create_dirs = (!uO.fflag || renamed);
 
created_dir = FALSE; /* not yet */
renamed_fullpath = FALSE;
 
if (renamed) {
cp = G.filename - 1; /* point to beginning of renamed name... */
while (*++cp)
if (*cp == '\\') /* convert backslashes to forward */
*cp = '/';
cp = G.filename;
/* use temporary rootpath if user gave full pathname */
if (G.filename[0] == '/') {
renamed_fullpath = TRUE;
pathcomp[0] = '/'; /* copy the '/' and terminate */
pathcomp[1] = '\0';
++cp;
} else if (isalpha((uch)G.filename[0]) && G.filename[1] == ':') {
renamed_fullpath = TRUE;
pp = pathcomp;
*pp++ = *cp++; /* copy the "d:" (+ '/', possibly) */
*pp++ = *cp++;
if (*cp == '/')
*pp++ = *cp++; /* otherwise add "./"? */
*pp = '\0';
}
}
 
/* pathcomp is ignored unless renamed_fullpath is TRUE: */
if ((error = checkdir(__G__ pathcomp, INIT)) != 0) /* initialize path buf */
return error; /* ...unless no mem or vol label on hard disk */
 
*pathcomp = '\0'; /* initialize translation buffer */
pp = pathcomp; /* point to translation buffer */
if (!renamed) { /* cp already set if renamed */
if (uO.jflag) /* junking directories */
cp = (char *)strrchr(G.filename, '/');
if (cp == (char *)NULL) /* no '/' or not junking dirs */
cp = G.filename; /* point to internal zipfile-member pathname */
else
++cp; /* point to start of last component of path */
}
 
/*---------------------------------------------------------------------------
Begin main loop through characters in filename.
---------------------------------------------------------------------------*/
 
while ((workch = (uch)*cp++) != 0) {
 
switch (workch) {
case '/': /* can assume -j flag not given */
*pp = '\0';
map2fat(pathcomp, last_dot); /* 8.3 truncation (in place) */
last_dot = (char *)NULL;
if (strcmp(pathcomp, ".") == 0) {
/* don't bother appending "./" to the path */
*pathcomp = '\0';
} else if (!uO.ddotflag && strcmp(pathcomp, "..") == 0) {
/* "../" dir traversal detected, skip over it */
*pathcomp = '\0';
killed_ddot = TRUE; /* set "show message" flag */
}
/* when path component is not empty, append it now */
if (*pathcomp != '\0' &&
((error = checkdir(__G__ pathcomp, APPEND_DIR))
& MPN_MASK) > MPN_INF_TRUNC)
return error;
pp = pathcomp; /* reset conversion buffer for next piece */
lastsemi = (char *)NULL; /* leave direct. semi-colons alone */
break;
 
case '.':
if (pp == pathcomp) { /* nothing appended yet... */
if (*cp == '.' && cp[1] == '/') { /* "../" */
*pp++ = '.'; /* add first dot, unchanged... */
++cp; /* skip second dot, since it will */
} else { /* be "added" at end of if-block */
*pp++ = '_'; /* FAT doesn't allow null filename */
dotname = TRUE; /* bodies, so map .exrc -> _.exrc */
} /* (extra '_' now, "dot" below) */
} else if (dotname) { /* found a second dot, but still */
dotname = FALSE; /* have extra leading underscore: */
*pp = '\0'; /* remove it by shifting chars */
pp = pathcomp + 1; /* left one space (e.g., .p1.p2: */
while (pp[1]) { /* __p1 -> _p1_p2 -> _p1.p2 when */
*pp = pp[1]; /* finished) [opt.: since first */
++pp; /* two chars are same, can start */
} /* shifting at second position] */
}
last_dot = pp; /* point at last dot so far... */
*pp++ = '_'; /* convert dot to underscore for now */
break;
 
/* drive names are not stored in zipfile, so no colons allowed;
* no brackets or most other punctuation either (all of which
* can appear in Unix-created archives; backslash is particularly
* bad unless all necessary directories exist) */
case '[': /* these punctuation characters forbidden */
case ']': /* only on plain FAT file systems */
case '+':
case ',':
case '=':
case ':': /* special shell characters of command.com */
case '\\': /* (device and directory limiters, wildcard */
case '"': /* characters, stdin/stdout redirection and */
case '<': /* pipe indicators and the quote sign) are */
case '>': /* never allowed in filenames on (V)FAT */
case '|':
case '*':
case '?':
*pp++ = '_';
break;
 
case ';': /* start of VMS version? */
lastsemi = pp;
break;
 
case ' ': /* change spaces to underscores */
if (uO.sflag) /* only if requested */
*pp++ = '_';
else
*pp++ = (char)workch;
break;
 
default:
/* allow ASCII 255 and European characters in filenames: */
if (isprint(workch) || workch >= 127)
*pp++ = (char)workch;
 
} /* end switch */
} /* end while loop */
 
/* Show warning when stripping insecure "parent dir" path components */
if (killed_ddot && QCOND2) {
Info(slide, 0, ((char *)slide, LoadFarString(WarnDirTraversSkip),
FnFilter1(G.filename)));
if (!(error & ~MPN_MASK))
error = (error & MPN_MASK) | PK_WARN;
}
 
/*---------------------------------------------------------------------------
Report if directory was created (and no file to create: filename ended
in '/'), check name to be sure it exists, and combine path and name be-
fore exiting.
---------------------------------------------------------------------------*/
 
if (G.filename[strlen(G.filename) - 1] == '/') {
checkdir(__G__ G.filename, GETPATH);
if (created_dir) {
if (QCOND2) {
Info(slide, 0, ((char *)slide, LoadFarString(Creating),
FnFilter1(G.filename)));
}
/* set dir time (note trailing '/') */
return (error & ~MPN_MASK) | MPN_CREATED_DIR;
}
/* dir existed already; don't look for data to extract */
return (error & ~MPN_MASK) | MPN_INF_SKIP;
}
 
*pp = '\0'; /* done with pathcomp: terminate it */
 
/* if not saving them, remove VMS version numbers (appended ";###") */
if (!uO.V_flag && lastsemi) {
pp = lastsemi; /* semi-colon was omitted: expect all #'s */
while (isdigit((uch)(*pp)))
++pp;
if (*pp == '\0') /* only digits between ';' and end: nuke */
*lastsemi = '\0';
}
 
map2fat(pathcomp, last_dot); /* 8.3 truncation (in place) */
 
if (*pathcomp == '\0') {
Info(slide, 1, ((char *)slide, LoadFarString(ConversionFailed),
FnFilter1(G.filename)));
return (error & ~MPN_MASK) | MPN_ERR_SKIP;
}
 
checkdir(__G__ pathcomp, APPEND_NAME); /* returns 1 if truncated: care? */
checkdir(__G__ G.filename, GETPATH);
 
return error;
 
} /* end function mapname() */
 
 
 
 
/**********************/
/* Function map2fat() */
/**********************/
 
static void map2fat(pathcomp, last_dot)
char *pathcomp, *last_dot;
{
char *pEnd = pathcomp + strlen(pathcomp);
 
/*---------------------------------------------------------------------------
Case 1: filename has no dot, so figure out if we should add one. Note
that the algorithm does not try to get too fancy: if there are no dots
already, the name either gets truncated at 8 characters or the last un-
derscore is converted to a dot (only if more characters are saved that
way). In no case is a dot inserted between existing characters.
 
GRR: have problem if filename is volume label??
 
---------------------------------------------------------------------------*/
 
/* pEnd = pathcomp + strlen(pathcomp); */
if (last_dot == (char *)NULL) { /* no dots: check for underscores... */
char *plu = strrchr(pathcomp, '_'); /* pointer to last underscore */
 
if (plu == (char *)NULL) { /* no dots, no underscores: truncate at */
if (pEnd > pathcomp+8) /* 8 chars (could insert '.' and keep 11) */
*(pEnd = pathcomp+8) = '\0';
} else if (MIN(plu - pathcomp, 8) + MIN(pEnd - plu - 1, 3) > 8) {
last_dot = plu; /* be lazy: drop through to next if-block */
} else if ((pEnd - pathcomp) > 8) /* more fits into just basename */
pathcomp[8] = '\0'; /* than if convert last underscore to dot */
/* else whole thing fits into 8 chars or less: no change */
}
 
/*---------------------------------------------------------------------------
Case 2: filename has dot in it, so truncate first half at 8 chars (shift
extension if necessary) and second half at three.
---------------------------------------------------------------------------*/
 
if (last_dot != (char *)NULL) { /* one dot (or two, in the case of */
*last_dot = '.'; /* "..") is OK: put it back in */
 
if ((last_dot - pathcomp) > 8) {
char *p=last_dot, *q=pathcomp+8;
int i;
 
for (i = 0; (i < 4) && *p; ++i) /* too many chars in basename: */
*q++ = *p++; /* shift extension left and */
*q = '\0'; /* truncate/terminate it */
} else if ((pEnd - last_dot) > 4)
last_dot[4] = '\0'; /* too many chars in extension */
/* else filename is fine as is: no change */
}
} /* end function map2fat() */
 
 
 
 
/***********************/
/* Function checkdir() */
/***********************/
 
int checkdir(__G__ pathcomp, flag)
__GDEF
char *pathcomp;
int flag;
/*
* returns:
* MPN_OK - no problem detected
* MPN_INF_TRUNC - (on APPEND_NAME) truncated filename
* MPN_INF_SKIP - path doesn't exist, not allowed to create
* MPN_ERR_SKIP - path doesn't exist, tried to create and failed; or path
* exists and is not a directory, but is supposed to be
* MPN_ERR_TOOLONG - path is too long
* MPN_NOMEM - can't allocate memory for filename buffers
*/
{
static int rootlen = 0; /* length of rootpath */
static char *rootpath; /* user's "extract-to" directory */
static char *buildpath; /* full path (so far) to extracted file */
static char *end; /* pointer to end of buildpath ('\0') */
 
# define FN_MASK 7
# define FUNCTION (flag & FN_MASK)
 
 
/*---------------------------------------------------------------------------
APPEND_DIR: append the path component to the path being built and check
for its existence. If doesn't exist and we are creating directories, do
so for this one; else signal success or error as appropriate.
---------------------------------------------------------------------------*/
 
if (FUNCTION == APPEND_DIR) {
int too_long = FALSE;
 
Trace((stderr, "appending dir segment [%s]\n", FnFilter1(pathcomp)));
while ((*end = *pathcomp++) != '\0')
++end;
 
/* GRR: could do better check, see if overrunning buffer as we go:
* check end-buildpath after each append, set warning variable if
* within 20 of FILNAMSIZ; then if var set, do careful check when
* appending. Clear variable when begin new path. */
 
if ((end-buildpath) > FILNAMSIZ-3) /* need '/', one-char name, '\0' */
too_long = TRUE; /* check if extracting directory? */
if (stat(buildpath, &G.statbuf)) /* path doesn't exist */
{
if (!G.create_dirs) { /* told not to create (freshening) */
free(buildpath);
return MPN_INF_SKIP; /* path doesn't exist: nothing to do */
}
if (too_long) {
Info(slide, 1, ((char *)slide, LoadFarString(PathTooLong),
FnFilter1(buildpath)));
free(buildpath);
/* no room for filenames: fatal */
return MPN_ERR_TOOLONG;
}
if (mkdir(buildpath, 0777) == -1) { /* create the directory */
Info(slide, 1, ((char *)slide, LoadFarString(CantCreateDir),
FnFilter2(buildpath), FnFilter1(G.filename)));
free(buildpath);
/* path didn't exist, tried to create, failed */
return MPN_ERR_SKIP;
}
created_dir = TRUE;
} else if (!S_ISDIR(G.statbuf.st_mode)) {
Info(slide, 1, ((char *)slide, LoadFarString(DirIsntDirectory),
FnFilter2(buildpath), FnFilter1(G.filename)));
free(buildpath);
/* path existed but wasn't dir */
return MPN_ERR_SKIP;
}
if (too_long) {
Info(slide, 1, ((char *)slide, LoadFarString(PathTooLong),
FnFilter1(buildpath)));
free(buildpath);
/* no room for filenames: fatal */
return MPN_ERR_TOOLONG;
}
*end++ = '/';
*end = '\0';
Trace((stderr, "buildpath now = [%s]\n", FnFilter1(buildpath)));
return MPN_OK;
 
} /* end if (FUNCTION == APPEND_DIR) */
 
/*---------------------------------------------------------------------------
GETPATH: copy full path to the string pointed at by pathcomp, and free
buildpath.
---------------------------------------------------------------------------*/
 
if (FUNCTION == GETPATH) {
strcpy(pathcomp, buildpath);
Trace((stderr, "getting and freeing path [%s]\n",
FnFilter1(pathcomp)));
free(buildpath);
buildpath = end = (char *)NULL;
return MPN_OK;
}
 
/*---------------------------------------------------------------------------
APPEND_NAME: assume the path component is the filename; append it and
return without checking for existence.
---------------------------------------------------------------------------*/
 
if (FUNCTION == APPEND_NAME) {
Trace((stderr, "appending filename [%s]\n", FnFilter1(pathcomp)));
while ((*end = *pathcomp++) != '\0') {
++end;
if ((end-buildpath) >= FILNAMSIZ) {
*--end = '\0';
Info(slide, 1, ((char *)slide, LoadFarString(PathTooLongTrunc),
FnFilter1(G.filename), FnFilter2(buildpath)));
return MPN_INF_TRUNC; /* filename truncated */
}
}
Trace((stderr, "buildpath now = [%s]\n", FnFilter1(buildpath)));
/* could check for existence here, prompt for new name... */
return MPN_OK;
}
 
/*---------------------------------------------------------------------------
INIT: allocate and initialize buffer space for the file currently being
extracted. If file was renamed with an absolute path, don't prepend the
extract-to path.
---------------------------------------------------------------------------*/
 
if (FUNCTION == INIT) {
Trace((stderr, "initializing buildpath to "));
/* allocate space for full filename, root path, and maybe "./" */
if ((buildpath = (char *)malloc(strlen(G.filename)+rootlen+3)) ==
(char *)NULL)
return MPN_NOMEM;
if (renamed_fullpath) { /* pathcomp = valid data */
end = buildpath;
while ((*end = *pathcomp++) != '\0')
++end;
} else if (rootlen > 0) {
strcpy(buildpath, rootpath);
end = buildpath + rootlen;
} else {
*buildpath = '\0';
end = buildpath;
}
Trace((stderr, "[%s]\n", FnFilter1(buildpath)));
return MPN_OK;
}
 
/*---------------------------------------------------------------------------
ROOT: if appropriate, store the path in rootpath and create it if neces-
sary; else assume it's a zipfile member and return. This path segment
gets used in extracting all members from every zipfile specified on the
command line. Note that under FlexOS, if a candidate extract-to
directory specification includes a drive letter (leading "x:"), it is
treated just as if it had a trailing '/'--that is, one directory level
will be created if the path doesn't exist, unless this is otherwise pro-
hibited (e.g., freshening).
---------------------------------------------------------------------------*/
 
#if (!defined(SFX) || defined(SFX_EXDIR))
if (FUNCTION == ROOT) {
Trace((stderr, "initializing root path to [%s]\n",
FnFilter1(pathcomp)));
if (pathcomp == (char *)NULL) {
rootlen = 0;
return MPN_OK;
}
if (rootlen > 0) /* rootpath was already set, nothing to do */
return MPN_OK;
if ((rootlen = strlen(pathcomp)) > 0) {
int had_trailing_pathsep=FALSE, add_dot=FALSE;
char *tmproot;
 
if ((tmproot = (char *)malloc(rootlen+3)) == (char *)NULL) {
rootlen = 0;
return MPN_NOMEM;
}
strcpy(tmproot, pathcomp);
if (tmproot[rootlen-1] == '/' || tmproot[rootlen-1] == '\\') {
tmproot[--rootlen] = '\0';
had_trailing_pathsep = TRUE;
}
if (tmproot[rootlen-1] == ':') {
if (!had_trailing_pathsep) /* i.e., original wasn't "xxx:/" */
add_dot = TRUE; /* relative path: add '.' before '/' */
} else if (rootlen > 0) && /* need not check "xxx:." and "xxx:/" */
(SSTAT(tmproot, &G.statbuf) ||
!S_ISDIR(G.statbuf.st_mode))
{
/* path does not exist */
if (!G.create_dirs /* || iswild(tmproot) */ ) {
free(tmproot);
rootlen = 0;
/* treat as stored file */
return MPN_INF_SKIP;
}
/* GRR: scan for wildcard characters? OS-dependent...
* if find any, return MPN_INF_SKIP: treat as stored file(s) */
/* create directory (could add loop here scanning tmproot
* to create more than one level, but really necessary?) */
if (mkdir(tmproot, 0777) == -1) {
Info(slide, 1, ((char *)slide,
LoadFarString(CantCreateExtractDir),
FnFilter1(tmproot)));
free(tmproot);
rootlen = 0;
/* path didn't exist, tried to create, and failed: */
/* file exists, or 2+ subdir levels required */
return MPN_ERR_SKIP;
}
}
if (add_dot) /* had just "x:", make "x:." */
tmproot[rootlen++] = '.';
tmproot[rootlen++] = '/';
tmproot[rootlen] = '\0';
if ((rootpath = (char *)realloc(tmproot, rootlen+1)) == NULL) {
free(tmproot);
rootlen = 0;
return MPN_NOMEM;
}
Trace((stderr, "rootpath now = [%s]\n", FnFilter1(rootpath)));
}
return MPN_OK;
}
#endif /* !SFX || SFX_EXDIR */
 
/*---------------------------------------------------------------------------
END: free rootpath, immediately prior to program exit.
---------------------------------------------------------------------------*/
 
if (FUNCTION == END) {
Trace((stderr, "freeing rootpath\n"));
if (rootlen > 0) {
free(rootpath);
rootlen = 0;
}
return MPN_OK;
}
 
return MPN_INVALID; /* should never reach */
 
} /* end function checkdir() */
 
 
 
 
/****************************/
/* Function close_outfile() */
/****************************/
 
void close_outfile(__G)
__GDEF
/*
* FlexOS VERSION
*
* Set the output file date/time stamp according to information from the
* zipfile directory record for this member, then close the file and set
* its permissions (archive, hidden, read-only, system). Aside from closing
* the file, this routine is optional (but most compilers support it).
*/
{
DISKFILE df;
LONG fnum;
 
struct { /* date and time words */
union { /* DOS file modification time word */
ush ztime;
struct {
unsigned zt_se : 5;
unsigned zt_mi : 6;
unsigned zt_hr : 5;
} _tf;
} _t;
union { /* DOS file modification date word */
ush zdate;
struct {
unsigned zd_dy : 5;
unsigned zd_mo : 4;
unsigned zd_yr : 7;
} _df;
} _d;
} zt;
 
#ifdef USE_EF_UT_TIME
iztimes z_utime;
struct tm *t;
#endif /* ?USE_EF_UT_TIME */
 
fclose(G.outfile);
 
if ((fnum = s_open(A_SET, G.filename)) < 0) {
Info(slide, 0x201, ((char *)slide,
"warning: cannot open %s to set the time\n",
FnFilter1(G.filename)));
return;
}
 
if (s_get(T_FILE, fnum, &df, DSKFSIZE) < 0) {
s_close(0, fnum);
 
Info(slide, 0x201, ((char *)slide,
"warning: cannot get info on %s\n", FnFilter1(G.filename)));
return;
}
 
/* skip restoring time stamps on user's request */
if (uO.D_flag <= 1) {
 
/*---------------------------------------------------------------------------
Copy and/or convert time and date variables, if necessary; then fill in
the file time/date.
---------------------------------------------------------------------------*/
 
#ifdef USE_EF_UT_TIME
if (G.extra_field &&
#ifdef IZ_CHECK_TZ
G.tz_is_valid &&
#endif
(ef_scan_for_izux(G.extra_field, G.lrec.extra_field_length, 0,
G.lrec.last_mod_dos_datetime, &z_utime, NULL) & EB_UT_FL_MTIME))
{
TTrace((stderr, "close_outfile: Unix e.f. modif. time = %ld\n",
z_utime.mtime));
t = localtime(&(z_utime.mtime));
} else
t = (struct tm *)NULL;
if (t != (struct tm *)NULL) {
if (t->tm_year < 80) {
df.df_modyear = 1980;
df.df_modmonth = 1;
df.df_modday = 1;
df.df_modhr = 0;
df.df_modmin = 0;
df.df_modsec = 0;
} else {
df.df_modyear = t->tm_year + 1900;
df.df_modmonth = t->tm_mon + 1;
df.df_modday = t->tm_mday;
df.df_modhr = t->tm_hour;
df.df_modmin = t->tm_min;
df.df_modsec = t->tm_sec;
}
} else
#endif /* ?USE_EF_UX_TIME */
{
zt._t.ztime = (ush)(G.lrec.last_mod_dos_datetime) & 0xffff;
zt._d.zdate = (ush)(G.lrec.last_mod_dos_datetime >> 16);
 
df.df_modyear = 1980 + zt._d._df.zd_yr;
df.df_modmonth = zt._d._df.zd_mo;
df.df_modday = zt._d._df.zd_dy;
df.df_modhr = zt._t._tf.zt_hr;
df.df_modmin = zt._t._tf.zt_mi;
df.df_modsec = zt._t._tf.zt_se << 1;
}
}
 
/*---------------------------------------------------------------------------
Fill in the file attributes.
---------------------------------------------------------------------------*/
 
df.df_attr1 = (UBYTE)G.pInfo->file_attr;
 
/*---------------------------------------------------------------------------
Now we try to set the attributes & date/time.
---------------------------------------------------------------------------*/
 
if (s_set(T_FILE, fnum, &df, DSKFSIZE) < 0)
Info(slide, 0x201, ((char *)slide,
"warning: cannot set info for %s\n", FnFilter1(G.filename)));
 
s_close(0, fnum);
} /* end function close_outfile() */
 
#ifndef SFX
 
/*************************/
/* Function dateformat() */
/*************************/
 
int dateformat()
{
return DF_DMY; /* default for systems without locale info */
}
 
/************************/
/* Function version() */
/************************/
 
void version(__G)
__GDEF
{
int len;
 
len = sprintf((char *)slide, LoadFarString(CompiledWith),
"MetaWare High C",
"",
"FlexOS",
" (16-bit, big)",
 
#ifdef __DATE__
" on ", __DATE__
#else
"", ""
#endif
);
 
(*G.message)((zvoid *)&G, slide, (ulg)len, 0);
}
 
#endif /* !SFX */
 
/************************/
/* Function _wildarg() */
/************************/
 
/* This prevents the PORTLIB startup code from preforming argument globbing */
 
_wildarg() {}
/programs/fs/unzip60/flexos/flxcfg.h
0,0 → 1,30
/*
Copyright (c) 1990-2000 Info-ZIP. All rights reserved.
 
See the accompanying file LICENSE, version 2000-Apr-09 or later
(the contents of which are also included in unzip.h) for terms of use.
If, for some reason, all these files are missing, the Info-ZIP license
also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html
*/
/*---------------------------------------------------------------------------
FlexOS specific configuration section:
---------------------------------------------------------------------------*/
 
#ifndef __flxcfg_h
#define __flxcfg_h
 
#define __16BIT__
#define MED_MEM
#define EXE_EXTENSION ".286"
 
#ifndef nearmalloc
# define nearmalloc malloc
# define nearfree free
#endif
 
#define CRTL_CP_IS_OEM
 
#define near
#define far
 
#endif /* !__flxcfg_h */
/programs/fs/unzip60/flexos/hc.pro
0,0 → 1,19
pragma Off(Floating_point);
pragma On(286);
pragma On(Literals_in_code);
pragma On(Warn);
pragma On(pointers_compatible);
pragma On(Callee_pops_when_possible);
 
pragma On(Auto_reg_alloc);
pragma On(Const_in_Code);
pragma On(Read_only_strings);
pragma On(Optimize_for_space);
 
pragma Off(Prototype_override_warnings);
pragma Off(Quiet);
pragma Off(Asm);
pragma Off(flexview);
 
#define PORTLIB
#define FLEXOS 1
/programs/fs/unzip60/flexos/makefile
0,0 → 1,199
#------------------------------------------------------------------------------
# Makefile for UnZip 5.53 and later Derek Fawcus
# Version: MetaWare High C with PAMAKE 30 Dec 2005
 
#
###########################################################################
#
# Alter the first two macros to change the model
#
 
MODEL = big
M = b
 
#
###########################################################################
#
# These two sets of prefixes are changed when swapping between the master
# and my machine.
#
 
FL_PREFIX = d:/flexos # Where FlexOS is rooted
#FL_PREFIX = c:/.
 
#
###########################################################################
#
# The following should not have to be changed - they should be automatic
# given correct values for the above.
#
 
HC_LIB = $(FL_PREFIX)/highc/$(MODEL)/hc$(M)e.l86
PORT_LIB = $(FL_PREFIX)/usr/portlib/$(MODEL)/prtlbhc$(M).l86
PORT_OBJ = $(FL_PREFIX)/usr/portlib/$(MODEL)/prtlbhc$(M).obj
 
HC_INC = $(FL_PREFIX)/highc/inc
PORT_INC = $(FL_PREFIX)/usr/portlib/inc
FLEX_INC = $(FL_PREFIX)/usr/inc
 
+IPATH = $(PORT_INC)/;$(FLEX_INC)/;
#+IPATH = $(PORT_INC)/;$(HC_INC)/;$(FLEX_INC)/;
 
#
###########################################################################
#
# The programs to do the work.
#
 
CC = hc
AS = rasm86
LD = link86
 
#HCOPTS=-mm $(MODEL) -debug -pr flexos/hc.pro
HCOPTS=-mm $(MODEL) -pr flexos/hc.pro
 
#
###########################################################################
#
# The file extensions to build from
#
 
.SUFFIXES:
.SUFFIXES: .c .h .a86
 
#
###########################################################################
#
 
# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
CPU_TYP = 2
 
# Uncomment the following three macros to use the optimized CRC32 assembler
# routine in UnZip and UnZipSFX:
#ASMFLG = -DASM_CRC
#ASMOBJS = crc_i86.obj
#ASMOBJF = crc_i86_.obj
 
ASCPUFLAG = __$(CPU_TYP)86
 
UNZIP_H = unzip.h unzpriv.h globals.h flexos/flxcfg.h
 
default: unzip.286
#default: unzip.286 funzip.286 unzipsfx.286
 
clean:
del *.ob?
del unzip.286
del funzip.286
del unzipsfx.*
del *.map
del *.lin
del *.sym
del *.dbg
 
#
###########################################################################
#
 
.asm.obj:
$(AS) $(ASFLAGS) -D$(ASUNMODEL) $*.asm
 
.c.obj:
$(CC) $< $(HCOPTS) -ob $@
 
.c.obf:
$(CC) $< $(HCOPTS) -def FUNZIP -ob $@
 
.c.obs:
$(CC) $< $(HCOPTS) -def SFX -ob $@
 
#
###########################################################################
#
 
crc_i86.obj: flexos/crc_i86.a86
$(AS) $(ASFLAGS) -D$(ASUNMODEL) flexos/crc_i86.a86, $*.obj ;
 
#
#########################################################################
#
# The objects to build from
#
 
UNZIP_OBJS = unzip.obj crc32.obj crypt.obj envargs.obj \
explode.obj extract.obj fileio.obj globals.obj inflate.obj \
list.obj match.obj process.obj ttyio.obj unreduce.obj \
unshrink.obj zipinfo.obj flexos.obj $(ASMOBJS)
 
unzip.286: $(UNZIP_OBJS)
$(LD) $@[st[add[17e]]] = $-[input]
$(PORT_OBJ),
$+(${UNZIP_OBJS}),
$(PORT_LIB),
$(HC_LIB)
<
 
UNZIPSFX_OBJS = unzip.obs crc32.obs crypt.obs extract.obs \
fileio.obs globals.obs inflate.obs match.obs process.obs \
ttyio.obs flexos.obs $(ASMOBJS)
 
unzipsfx.286: $(UNZIPSFX_OBJS)
$(LD) $@[dbi,map[all],st[add[17e]]] = $-[input]
$(PORT_OBJ),
$+(${UNZIPSFX_OBJS}),
$(PORT_LIB),
$(HC_LIB)
<
 
FUNZIP_OBJS = funzip.obj crc32.obf crypt.obf globals.obf inflate.obf \
ttyio.obf $(ASMOBJF)
 
funzip.286: $(FUNZIP_OBJS)
$(LD) $@[dbi,map[all],st[add[17e]]] = $-[input]
$(PORT_OBJ),
$+(${FUNZIP_OBJS}),
$(PORT_LIB),
$(HC_LIB)
<
 
#
###########################################################################
#
 
unreduce.obj: unreduce.c $(UNZIP_H)
unshrink.obj: unshrink.c $(UNZIP_H)
unzip.obj: unzip.c $(UNZIP_H) crypt.h unzvers.h consts.h
zipinfo.obj: zipinfo.c $(UNZIP_H)
process.obj: process.c $(UNZIP_H) crc32.h
list.obj: list.c $(UNZIP_H)
match.obj: match.c $(UNZIP_H)
fileio.obj: fileio.c $(UNZIP_H) crc32.h crypt.h ttyio.h ebcdic.h
envargs.obj: envargs.c $(UNZIP_H)
explode.obj: explode.c $(UNZIP_H)
extract.obj: extract.c $(UNZIP_H) crc32.h crypt.h
crc32.obj: crc32.c $(UNZIP_H) zip.h crc32.h
 
flexos.obj: flexos/flexos.c $(UNZIP_H)
crc32.obj: crc32.c $(UNZIP_H) zip.h crc32.h
crypt.obj: crypt.c $(UNZIP_H) crc32.h crypt.h ttyio.h zip.h
globals.obj: globals.c $(UNZIP_H)
inflate.obj: inflate.c inflate.h $(UNZIP_H)
ttyio.obj: ttyio.c $(UNZIP_H) crypt.h ttyio.h zip.h
 
funzip.obj: funzip.c $(UNZIP_H) crc32.h crypt.h ttyio.h
crc32.obf: crc32.c $(UNZIP_H) zip.h crc32.h
crypt.obf: crypt.c $(UNZIP_H) crypt.h ttyio.h zip.h
globals.obf: globals.c $(UNZIP_H)
inflate.obf: inflate.c inflate.h $(UNZIP_H) crypt.h
ttyio.obf: ttyio.c $(UNZIP_H) crypt.h ttyio.h zip.h
 
flexos.obs: flexos/flexos.c $(UNZIP_H)
crc32.obs: crc32.c $(UNZIP_H) zip.h crc32.h
extract.obs: extract.c $(UNZIP_H) crc32.h crypt.h
fileio.obs: fileio.c $(UNZIP_H) crc32.h crypt.h ttyio.h ebcdic.h
globals.obs: globals.c $(UNZIP_H)
inflate.obs: inflate.c inflate.h $(UNZIP_H) crypt.h
match.obs: match.c $(UNZIP_H)
process.obs: process.c $(UNZIP_H) crc32.h
ttyio.obs: ttyio.c $(UNZIP_H) crypt.h ttyio.h zip.h
unzip.obs: unzip.c $(UNZIP_H) crypt.h unzvers.h consts.h