Subversion Repositories Kolibri OS

Compare Revisions

No changes between revisions

Regard whitespace Rev 536 → Rev 537

/kernel/tags/kolibri0.7.0.0/boot/booteng.inc
0,0 → 1,95
$Revision$
;======================================================================
;
; BOOT DATA
;
;======================================================================
 
d80x25_bottom:
db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY '
db 'NO WARRANTY ',186
db 186,' See file COPYING for details '
db ' ',186
line_full_bottom
d80x25_bottom_num = 3
 
novesa db "Display: EGA/CGA",13,10,0
vervesa db "Version of Vesa: Vesa x.x",13,10,0
vervesa_off=22
msg_apm db " APM x.x ", 0
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, "
db "[3] 1024x768, [4] 1280x1024",13,10
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, "
db "[7] 1024x768, [8] 1280x1024",13,10
db 186," EGA/CGA 256 Colors: [9] 320x200, "
db "VGA 16 Colors: [0] 640x480",13,10
db 186," Select mode: ",0
bt24 db "Bits Per Pixel: 24",13,10,0
bt32 db "Bits Per Pixel: 32",13,10,0
vrrmprint db "Apply VRR? (picture frequency greater than 60Hz"
db " only for transfers:",13,10
db 186," 1024*768->800*600 and 800*600->640*480) [1-yes,2-no]:",0
;askmouse db " Mouse at:"
; db " [1] PS/2 (USB), [2] Com1, [3] Com2."
; db " Select port [1-3]: ",0
;no_com1 db 13,10,186, " No COM1 mouse",0
;no_com2 db 13,10,186, " No COM2 mouse",0
ask_dma db "Use DMA for HDD access? [1-yes, 2-only for reading, 3-no]: ",0
;gr_direct db 186," Use direct LFB writing? "
; db "[1-yes/2-no] ? ",0
;mem_model db 13,10,186," Motherboard memory [1-16 Mb / 2-32 Mb / "
; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0
;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0
bdev db "Load ramdisk from [1-floppy; 2-C:\kolibri.img (FAT32);"
db 13,10,186," "
db "3-use preloaded ram-image from kernel restart]: ",0
probetext db 13,10,13,10,186," Use standart graphics mode? [1-yes, "
db "2-probe bios (Vesa 3.0)]: ",0
;memokz256 db 13,10,186," RAM 256 Mb",0
;memokz128 db 13,10,186," RAM 128 Mb",0
;memokz64 db 13,10,186," RAM 64 Mb",0
;memokz32 db 13,10,186," RAM 32 Mb",0
;memokz16 db 13,10,186," RAM 16 Mb",0
prnotfnd db "Fatal - Videomode not found.",0
;modena db "Fatal - VBE 0x112+ required.",0
not386 db "Fatal - CPU 386+ required.",0
btns db "Fatal - Can't determine color depth.",0
fatalsel db "Fatal - Graphics mode not supported by hardware.",0
badsect db 13,10,186," Fatal - Bad sector. Replace floppy.",0
memmovefailed db 13,10,186," Fatal - Int 0x15 move failed.",0
okt db " ... OK"
linef db 13,10,0
diskload db "Loading diskette: 00 %",8,8,8,8,0
pros db "00"
backspace2 db 8,8,0
boot_dev db 0 ; 0=floppy, 1=hd
start_msg db "Press [abcd] to change settings, press [Enter] to continue booting",13,10,0
time_msg db " or wait "
time_str db " 5 seconds"
db " before automatical continuation",13,10,0
current_cfg_msg db "Current settings:",13,10,0
curvideo_msg db " [a] Videomode: ",0
mode1 db "640x480",0
mode2 db "800x600",0
mode3 db "1024x768",0
mode4 db "1280x1024",0
modes_msg dw mode4,mode1,mode2,mode3
modevesa20 db " with LFB",0
modevesa12 db ", VESA 1.2 Bnk",0
mode9 db "320x200, EGA/CGA 256 colors",0
mode10 db "640x480, VGA 16 colors",0
probeno_msg db " (standard mode)",0
probeok_msg db " (check nonstandard modes)",0
dma_msg db " [b] Use DMA for HDD access:",0
on_msg db " on",13,10,0
off_msg db " off",13,10,0
readonly_msg db " only for reading",13,10,0
vrrm_msg db " [c] Use VRR:",0
preboot_device_msg db " [d] Floppy image: ",0
preboot_device_msgs dw 0,pdm1,pdm2,pdm3
pdm1 db "real floppy",13,10,0
pdm2 db "C:\kolibri.img (FAT32)",13,10,0
pdm3 db "use already loaded image",13,10,0
loading_msg db "Loading KolibriOS...",0
save_quest db "Remember current settings? [y/n]: ",0
loader_block_error db "Bootloader data invalid, I cannot continue. Stopped.",0
Property changes:
Added: svn:keywords
+Rev
\ No newline at end of property