0,0 → 1,2002 |
/* |
Copyright (C) Intel Corp. 2006. All Rights Reserved. |
Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to |
develop this 3D driver. |
|
Permission is hereby granted, free of charge, to any person obtaining |
a copy of this software and associated documentation files (the |
"Software"), to deal in the Software without restriction, including |
without limitation the rights to use, copy, modify, merge, publish, |
distribute, sublicense, and/or sell copies of the Software, and to |
permit persons to whom the Software is furnished to do so, subject to |
the following conditions: |
|
The above copyright notice and this permission notice (including the |
next paragraph) shall be included in all copies or substantial |
portions of the Software. |
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
|
**********************************************************************/ |
/* |
* Authors: |
* Keith Whitwell <keith@tungstengraphics.com> |
*/ |
|
#include "brw_eu.h" |
|
#include <string.h> |
#include <stdlib.h> |
|
/*********************************************************************** |
* Internal helper for constructing instructions |
*/ |
|
static void guess_execution_size(struct brw_compile *p, |
struct brw_instruction *insn, |
struct brw_reg reg) |
{ |
if (reg.width == BRW_WIDTH_8 && p->compressed) |
insn->header.execution_size = BRW_EXECUTE_16; |
else |
insn->header.execution_size = reg.width; |
} |
|
|
/** |
* Prior to Sandybridge, the SEND instruction accepted non-MRF source |
* registers, implicitly moving the operand to a message register. |
* |
* On Sandybridge, this is no longer the case. This function performs the |
* explicit move; it should be called before emitting a SEND instruction. |
*/ |
void |
gen6_resolve_implied_move(struct brw_compile *p, |
struct brw_reg *src, |
unsigned msg_reg_nr) |
{ |
if (p->gen < 060) |
return; |
|
if (src->file == BRW_MESSAGE_REGISTER_FILE) |
return; |
|
if (src->file != BRW_ARCHITECTURE_REGISTER_FILE || src->nr != BRW_ARF_NULL) { |
brw_push_insn_state(p); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_MOV(p, __retype_ud(brw_message_reg(msg_reg_nr)), __retype_ud(*src)); |
brw_pop_insn_state(p); |
} |
*src = brw_message_reg(msg_reg_nr); |
} |
|
static void |
gen7_convert_mrf_to_grf(struct brw_compile *p, struct brw_reg *reg) |
{ |
/* From the BSpec / ISA Reference / send - [DevIVB+]: |
* "The send with EOT should use register space R112-R127 for <src>. This is |
* to enable loading of a new thread into the same slot while the message |
* with EOT for current thread is pending dispatch." |
* |
* Since we're pretending to have 16 MRFs anyway, we may as well use the |
* registers required for messages with EOT. |
*/ |
if (p->gen >= 070 && reg->file == BRW_MESSAGE_REGISTER_FILE) { |
reg->file = BRW_GENERAL_REGISTER_FILE; |
reg->nr += 111; |
} |
} |
|
void |
brw_set_dest(struct brw_compile *p, struct brw_instruction *insn, |
struct brw_reg dest) |
{ |
if (dest.file != BRW_ARCHITECTURE_REGISTER_FILE && |
dest.file != BRW_MESSAGE_REGISTER_FILE) |
assert(dest.nr < 128); |
|
gen7_convert_mrf_to_grf(p, &dest); |
|
insn->bits1.da1.dest_reg_file = dest.file; |
insn->bits1.da1.dest_reg_type = dest.type; |
insn->bits1.da1.dest_address_mode = dest.address_mode; |
|
if (dest.address_mode == BRW_ADDRESS_DIRECT) { |
insn->bits1.da1.dest_reg_nr = dest.nr; |
|
if (insn->header.access_mode == BRW_ALIGN_1) { |
insn->bits1.da1.dest_subreg_nr = dest.subnr; |
if (dest.hstride == BRW_HORIZONTAL_STRIDE_0) |
dest.hstride = BRW_HORIZONTAL_STRIDE_1; |
insn->bits1.da1.dest_horiz_stride = dest.hstride; |
} else { |
insn->bits1.da16.dest_subreg_nr = dest.subnr / 16; |
insn->bits1.da16.dest_writemask = dest.dw1.bits.writemask; |
/* even ignored in da16, still need to set as '01' */ |
insn->bits1.da16.dest_horiz_stride = 1; |
} |
} else { |
insn->bits1.ia1.dest_subreg_nr = dest.subnr; |
|
/* These are different sizes in align1 vs align16: |
*/ |
if (insn->header.access_mode == BRW_ALIGN_1) { |
insn->bits1.ia1.dest_indirect_offset = dest.dw1.bits.indirect_offset; |
if (dest.hstride == BRW_HORIZONTAL_STRIDE_0) |
dest.hstride = BRW_HORIZONTAL_STRIDE_1; |
insn->bits1.ia1.dest_horiz_stride = dest.hstride; |
} |
else { |
insn->bits1.ia16.dest_indirect_offset = dest.dw1.bits.indirect_offset; |
/* even ignored in da16, still need to set as '01' */ |
insn->bits1.ia16.dest_horiz_stride = 1; |
} |
} |
|
guess_execution_size(p, insn, dest); |
} |
|
static const int reg_type_size[8] = { |
[0] = 4, |
[1] = 4, |
[2] = 2, |
[3] = 2, |
[4] = 1, |
[5] = 1, |
[7] = 4 |
}; |
|
static void |
validate_reg(struct brw_instruction *insn, struct brw_reg reg) |
{ |
int hstride_for_reg[] = {0, 1, 2, 4}; |
int vstride_for_reg[] = {0, 1, 2, 4, 8, 16, 32, 64, 128, 256}; |
int width_for_reg[] = {1, 2, 4, 8, 16}; |
int execsize_for_reg[] = {1, 2, 4, 8, 16}; |
int width, hstride, vstride, execsize; |
|
if (reg.file == BRW_IMMEDIATE_VALUE) { |
/* 3.3.6: Region Parameters. Restriction: Immediate vectors |
* mean the destination has to be 128-bit aligned and the |
* destination horiz stride has to be a word. |
*/ |
if (reg.type == BRW_REGISTER_TYPE_V) { |
assert(hstride_for_reg[insn->bits1.da1.dest_horiz_stride] * |
reg_type_size[insn->bits1.da1.dest_reg_type] == 2); |
} |
|
return; |
} |
|
if (reg.file == BRW_ARCHITECTURE_REGISTER_FILE && |
reg.file == BRW_ARF_NULL) |
return; |
|
hstride = hstride_for_reg[reg.hstride]; |
|
if (reg.vstride == 0xf) { |
vstride = -1; |
} else { |
vstride = vstride_for_reg[reg.vstride]; |
} |
|
width = width_for_reg[reg.width]; |
|
execsize = execsize_for_reg[insn->header.execution_size]; |
|
/* Restrictions from 3.3.10: Register Region Restrictions. */ |
/* 3. */ |
assert(execsize >= width); |
|
/* 4. */ |
if (execsize == width && hstride != 0) { |
assert(vstride == -1 || vstride == width * hstride); |
} |
|
/* 5. */ |
if (execsize == width && hstride == 0) { |
/* no restriction on vstride. */ |
} |
|
/* 6. */ |
if (width == 1) { |
assert(hstride == 0); |
} |
|
/* 7. */ |
if (execsize == 1 && width == 1) { |
assert(hstride == 0); |
assert(vstride == 0); |
} |
|
/* 8. */ |
if (vstride == 0 && hstride == 0) { |
assert(width == 1); |
} |
|
/* 10. Check destination issues. */ |
} |
|
void |
brw_set_src0(struct brw_compile *p, struct brw_instruction *insn, |
struct brw_reg reg) |
{ |
if (reg.type != BRW_ARCHITECTURE_REGISTER_FILE) |
assert(reg.nr < 128); |
|
gen7_convert_mrf_to_grf(p, ®); |
|
validate_reg(insn, reg); |
|
insn->bits1.da1.src0_reg_file = reg.file; |
insn->bits1.da1.src0_reg_type = reg.type; |
insn->bits2.da1.src0_abs = reg.abs; |
insn->bits2.da1.src0_negate = reg.negate; |
insn->bits2.da1.src0_address_mode = reg.address_mode; |
|
if (reg.file == BRW_IMMEDIATE_VALUE) { |
insn->bits3.ud = reg.dw1.ud; |
|
/* Required to set some fields in src1 as well: |
*/ |
insn->bits1.da1.src1_reg_file = 0; /* arf */ |
insn->bits1.da1.src1_reg_type = reg.type; |
} else { |
if (reg.address_mode == BRW_ADDRESS_DIRECT) { |
if (insn->header.access_mode == BRW_ALIGN_1) { |
insn->bits2.da1.src0_subreg_nr = reg.subnr; |
insn->bits2.da1.src0_reg_nr = reg.nr; |
} else { |
insn->bits2.da16.src0_subreg_nr = reg.subnr / 16; |
insn->bits2.da16.src0_reg_nr = reg.nr; |
} |
} else { |
insn->bits2.ia1.src0_subreg_nr = reg.subnr; |
|
if (insn->header.access_mode == BRW_ALIGN_1) { |
insn->bits2.ia1.src0_indirect_offset = reg.dw1.bits.indirect_offset; |
} else { |
insn->bits2.ia16.src0_subreg_nr = reg.dw1.bits.indirect_offset; |
} |
} |
|
if (insn->header.access_mode == BRW_ALIGN_1) { |
if (reg.width == BRW_WIDTH_1 && |
insn->header.execution_size == BRW_EXECUTE_1) { |
insn->bits2.da1.src0_horiz_stride = BRW_HORIZONTAL_STRIDE_0; |
insn->bits2.da1.src0_width = BRW_WIDTH_1; |
insn->bits2.da1.src0_vert_stride = BRW_VERTICAL_STRIDE_0; |
} else { |
insn->bits2.da1.src0_horiz_stride = reg.hstride; |
insn->bits2.da1.src0_width = reg.width; |
insn->bits2.da1.src0_vert_stride = reg.vstride; |
} |
} else { |
insn->bits2.da16.src0_swz_x = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_X); |
insn->bits2.da16.src0_swz_y = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_Y); |
insn->bits2.da16.src0_swz_z = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_Z); |
insn->bits2.da16.src0_swz_w = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_W); |
|
/* This is an oddity of the fact we're using the same |
* descriptions for registers in align_16 as align_1: |
*/ |
if (reg.vstride == BRW_VERTICAL_STRIDE_8) |
insn->bits2.da16.src0_vert_stride = BRW_VERTICAL_STRIDE_4; |
else |
insn->bits2.da16.src0_vert_stride = reg.vstride; |
} |
} |
} |
|
void brw_set_src1(struct brw_compile *p, |
struct brw_instruction *insn, |
struct brw_reg reg) |
{ |
assert(reg.file != BRW_MESSAGE_REGISTER_FILE); |
assert(reg.nr < 128); |
|
gen7_convert_mrf_to_grf(p, ®); |
|
validate_reg(insn, reg); |
|
insn->bits1.da1.src1_reg_file = reg.file; |
insn->bits1.da1.src1_reg_type = reg.type; |
insn->bits3.da1.src1_abs = reg.abs; |
insn->bits3.da1.src1_negate = reg.negate; |
|
/* Only src1 can be immediate in two-argument instructions. */ |
assert(insn->bits1.da1.src0_reg_file != BRW_IMMEDIATE_VALUE); |
|
if (reg.file == BRW_IMMEDIATE_VALUE) { |
insn->bits3.ud = reg.dw1.ud; |
} else { |
/* This is a hardware restriction, which may or may not be lifted |
* in the future: |
*/ |
assert (reg.address_mode == BRW_ADDRESS_DIRECT); |
/* assert (reg.file == BRW_GENERAL_REGISTER_FILE); */ |
|
if (insn->header.access_mode == BRW_ALIGN_1) { |
insn->bits3.da1.src1_subreg_nr = reg.subnr; |
insn->bits3.da1.src1_reg_nr = reg.nr; |
} else { |
insn->bits3.da16.src1_subreg_nr = reg.subnr / 16; |
insn->bits3.da16.src1_reg_nr = reg.nr; |
} |
|
if (insn->header.access_mode == BRW_ALIGN_1) { |
if (reg.width == BRW_WIDTH_1 && |
insn->header.execution_size == BRW_EXECUTE_1) { |
insn->bits3.da1.src1_horiz_stride = BRW_HORIZONTAL_STRIDE_0; |
insn->bits3.da1.src1_width = BRW_WIDTH_1; |
insn->bits3.da1.src1_vert_stride = BRW_VERTICAL_STRIDE_0; |
} else { |
insn->bits3.da1.src1_horiz_stride = reg.hstride; |
insn->bits3.da1.src1_width = reg.width; |
insn->bits3.da1.src1_vert_stride = reg.vstride; |
} |
} else { |
insn->bits3.da16.src1_swz_x = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_X); |
insn->bits3.da16.src1_swz_y = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_Y); |
insn->bits3.da16.src1_swz_z = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_Z); |
insn->bits3.da16.src1_swz_w = BRW_GET_SWZ(reg.dw1.bits.swizzle, BRW_CHANNEL_W); |
|
/* This is an oddity of the fact we're using the same |
* descriptions for registers in align_16 as align_1: |
*/ |
if (reg.vstride == BRW_VERTICAL_STRIDE_8) |
insn->bits3.da16.src1_vert_stride = BRW_VERTICAL_STRIDE_4; |
else |
insn->bits3.da16.src1_vert_stride = reg.vstride; |
} |
} |
} |
|
/** |
* Set the Message Descriptor and Extended Message Descriptor fields |
* for SEND messages. |
* |
* \note This zeroes out the Function Control bits, so it must be called |
* \b before filling out any message-specific data. Callers can |
* choose not to fill in irrelevant bits; they will be zero. |
*/ |
static void |
brw_set_message_descriptor(struct brw_compile *p, |
struct brw_instruction *inst, |
enum brw_message_target sfid, |
unsigned msg_length, |
unsigned response_length, |
bool header_present, |
bool end_of_thread) |
{ |
brw_set_src1(p, inst, brw_imm_d(0)); |
|
if (p->gen >= 050) { |
inst->bits3.generic_gen5.header_present = header_present; |
inst->bits3.generic_gen5.response_length = response_length; |
inst->bits3.generic_gen5.msg_length = msg_length; |
inst->bits3.generic_gen5.end_of_thread = end_of_thread; |
|
if (p->gen >= 060) { |
/* On Gen6+ Message target/SFID goes in bits 27:24 of the header */ |
inst->header.destreg__conditionalmod = sfid; |
} else { |
/* Set Extended Message Descriptor (ex_desc) */ |
inst->bits2.send_gen5.sfid = sfid; |
inst->bits2.send_gen5.end_of_thread = end_of_thread; |
} |
} else { |
inst->bits3.generic.response_length = response_length; |
inst->bits3.generic.msg_length = msg_length; |
inst->bits3.generic.msg_target = sfid; |
inst->bits3.generic.end_of_thread = end_of_thread; |
} |
} |
|
|
static void brw_set_math_message(struct brw_compile *p, |
struct brw_instruction *insn, |
unsigned function, |
unsigned integer_type, |
bool low_precision, |
bool saturate, |
unsigned dataType) |
{ |
unsigned msg_length; |
unsigned response_length; |
|
/* Infer message length from the function */ |
switch (function) { |
case BRW_MATH_FUNCTION_POW: |
case BRW_MATH_FUNCTION_INT_DIV_QUOTIENT: |
case BRW_MATH_FUNCTION_INT_DIV_REMAINDER: |
case BRW_MATH_FUNCTION_INT_DIV_QUOTIENT_AND_REMAINDER: |
msg_length = 2; |
break; |
default: |
msg_length = 1; |
break; |
} |
|
/* Infer response length from the function */ |
switch (function) { |
case BRW_MATH_FUNCTION_SINCOS: |
case BRW_MATH_FUNCTION_INT_DIV_QUOTIENT_AND_REMAINDER: |
response_length = 2; |
break; |
default: |
response_length = 1; |
break; |
} |
|
brw_set_message_descriptor(p, insn, BRW_SFID_MATH, |
msg_length, response_length, |
false, false); |
if (p->gen == 050) { |
insn->bits3.math_gen5.function = function; |
insn->bits3.math_gen5.int_type = integer_type; |
insn->bits3.math_gen5.precision = low_precision; |
insn->bits3.math_gen5.saturate = saturate; |
insn->bits3.math_gen5.data_type = dataType; |
insn->bits3.math_gen5.snapshot = 0; |
} else { |
insn->bits3.math.function = function; |
insn->bits3.math.int_type = integer_type; |
insn->bits3.math.precision = low_precision; |
insn->bits3.math.saturate = saturate; |
insn->bits3.math.data_type = dataType; |
} |
} |
|
static void brw_set_ff_sync_message(struct brw_compile *p, |
struct brw_instruction *insn, |
bool allocate, |
unsigned response_length, |
bool end_of_thread) |
{ |
brw_set_message_descriptor(p, insn, BRW_SFID_URB, |
1, response_length, |
true, end_of_thread); |
insn->bits3.urb_gen5.opcode = 1; /* FF_SYNC */ |
insn->bits3.urb_gen5.offset = 0; /* Not used by FF_SYNC */ |
insn->bits3.urb_gen5.swizzle_control = 0; /* Not used by FF_SYNC */ |
insn->bits3.urb_gen5.allocate = allocate; |
insn->bits3.urb_gen5.used = 0; /* Not used by FF_SYNC */ |
insn->bits3.urb_gen5.complete = 0; /* Not used by FF_SYNC */ |
} |
|
static void brw_set_urb_message(struct brw_compile *p, |
struct brw_instruction *insn, |
bool allocate, |
bool used, |
unsigned msg_length, |
unsigned response_length, |
bool end_of_thread, |
bool complete, |
unsigned offset, |
unsigned swizzle_control) |
{ |
brw_set_message_descriptor(p, insn, BRW_SFID_URB, |
msg_length, response_length, true, end_of_thread); |
if (p->gen >= 070) { |
insn->bits3.urb_gen7.opcode = 0; /* URB_WRITE_HWORD */ |
insn->bits3.urb_gen7.offset = offset; |
assert(swizzle_control != BRW_URB_SWIZZLE_TRANSPOSE); |
insn->bits3.urb_gen7.swizzle_control = swizzle_control; |
/* per_slot_offset = 0 makes it ignore offsets in message header */ |
insn->bits3.urb_gen7.per_slot_offset = 0; |
insn->bits3.urb_gen7.complete = complete; |
} else if (p->gen >= 050) { |
insn->bits3.urb_gen5.opcode = 0; /* URB_WRITE */ |
insn->bits3.urb_gen5.offset = offset; |
insn->bits3.urb_gen5.swizzle_control = swizzle_control; |
insn->bits3.urb_gen5.allocate = allocate; |
insn->bits3.urb_gen5.used = used; /* ? */ |
insn->bits3.urb_gen5.complete = complete; |
} else { |
insn->bits3.urb.opcode = 0; /* ? */ |
insn->bits3.urb.offset = offset; |
insn->bits3.urb.swizzle_control = swizzle_control; |
insn->bits3.urb.allocate = allocate; |
insn->bits3.urb.used = used; /* ? */ |
insn->bits3.urb.complete = complete; |
} |
} |
|
void |
brw_set_dp_write_message(struct brw_compile *p, |
struct brw_instruction *insn, |
unsigned binding_table_index, |
unsigned msg_control, |
unsigned msg_type, |
unsigned msg_length, |
bool header_present, |
bool last_render_target, |
unsigned response_length, |
bool end_of_thread, |
bool send_commit_msg) |
{ |
unsigned sfid; |
|
if (p->gen >= 070) { |
/* Use the Render Cache for RT writes; otherwise use the Data Cache */ |
if (msg_type == GEN6_DATAPORT_WRITE_MESSAGE_RENDER_TARGET_WRITE) |
sfid = GEN6_SFID_DATAPORT_RENDER_CACHE; |
else |
sfid = GEN7_SFID_DATAPORT_DATA_CACHE; |
} else if (p->gen >= 060) { |
/* Use the render cache for all write messages. */ |
sfid = GEN6_SFID_DATAPORT_RENDER_CACHE; |
} else { |
sfid = BRW_SFID_DATAPORT_WRITE; |
} |
|
brw_set_message_descriptor(p, insn, sfid, |
msg_length, response_length, |
header_present, end_of_thread); |
|
if (p->gen >= 070) { |
insn->bits3.gen7_dp.binding_table_index = binding_table_index; |
insn->bits3.gen7_dp.msg_control = msg_control; |
insn->bits3.gen7_dp.last_render_target = last_render_target; |
insn->bits3.gen7_dp.msg_type = msg_type; |
} else if (p->gen >= 060) { |
insn->bits3.gen6_dp.binding_table_index = binding_table_index; |
insn->bits3.gen6_dp.msg_control = msg_control; |
insn->bits3.gen6_dp.last_render_target = last_render_target; |
insn->bits3.gen6_dp.msg_type = msg_type; |
insn->bits3.gen6_dp.send_commit_msg = send_commit_msg; |
} else if (p->gen >= 050) { |
insn->bits3.dp_write_gen5.binding_table_index = binding_table_index; |
insn->bits3.dp_write_gen5.msg_control = msg_control; |
insn->bits3.dp_write_gen5.last_render_target = last_render_target; |
insn->bits3.dp_write_gen5.msg_type = msg_type; |
insn->bits3.dp_write_gen5.send_commit_msg = send_commit_msg; |
} else { |
insn->bits3.dp_write.binding_table_index = binding_table_index; |
insn->bits3.dp_write.msg_control = msg_control; |
insn->bits3.dp_write.last_render_target = last_render_target; |
insn->bits3.dp_write.msg_type = msg_type; |
insn->bits3.dp_write.send_commit_msg = send_commit_msg; |
} |
} |
|
void |
brw_set_dp_read_message(struct brw_compile *p, |
struct brw_instruction *insn, |
unsigned binding_table_index, |
unsigned msg_control, |
unsigned msg_type, |
unsigned target_cache, |
unsigned msg_length, |
unsigned response_length) |
{ |
unsigned sfid; |
|
if (p->gen >= 070) { |
sfid = GEN7_SFID_DATAPORT_DATA_CACHE; |
} else if (p->gen >= 060) { |
if (target_cache == BRW_DATAPORT_READ_TARGET_RENDER_CACHE) |
sfid = GEN6_SFID_DATAPORT_RENDER_CACHE; |
else |
sfid = GEN6_SFID_DATAPORT_SAMPLER_CACHE; |
} else { |
sfid = BRW_SFID_DATAPORT_READ; |
} |
|
brw_set_message_descriptor(p, insn, sfid, |
msg_length, response_length, |
true, false); |
|
if (p->gen >= 070) { |
insn->bits3.gen7_dp.binding_table_index = binding_table_index; |
insn->bits3.gen7_dp.msg_control = msg_control; |
insn->bits3.gen7_dp.last_render_target = 0; |
insn->bits3.gen7_dp.msg_type = msg_type; |
} else if (p->gen >= 060) { |
insn->bits3.gen6_dp.binding_table_index = binding_table_index; |
insn->bits3.gen6_dp.msg_control = msg_control; |
insn->bits3.gen6_dp.last_render_target = 0; |
insn->bits3.gen6_dp.msg_type = msg_type; |
insn->bits3.gen6_dp.send_commit_msg = 0; |
} else if (p->gen >= 050) { |
insn->bits3.dp_read_gen5.binding_table_index = binding_table_index; |
insn->bits3.dp_read_gen5.msg_control = msg_control; |
insn->bits3.dp_read_gen5.msg_type = msg_type; |
insn->bits3.dp_read_gen5.target_cache = target_cache; |
} else if (p->gen >= 045) { |
insn->bits3.dp_read_g4x.binding_table_index = binding_table_index; /*0:7*/ |
insn->bits3.dp_read_g4x.msg_control = msg_control; /*8:10*/ |
insn->bits3.dp_read_g4x.msg_type = msg_type; /*11:13*/ |
insn->bits3.dp_read_g4x.target_cache = target_cache; /*14:15*/ |
} else { |
insn->bits3.dp_read.binding_table_index = binding_table_index; /*0:7*/ |
insn->bits3.dp_read.msg_control = msg_control; /*8:11*/ |
insn->bits3.dp_read.msg_type = msg_type; /*12:13*/ |
insn->bits3.dp_read.target_cache = target_cache; /*14:15*/ |
} |
} |
|
static void brw_set_sampler_message(struct brw_compile *p, |
struct brw_instruction *insn, |
unsigned binding_table_index, |
unsigned sampler, |
unsigned msg_type, |
unsigned response_length, |
unsigned msg_length, |
bool header_present, |
unsigned simd_mode) |
{ |
brw_set_message_descriptor(p, insn, BRW_SFID_SAMPLER, |
msg_length, response_length, |
header_present, false); |
|
if (p->gen >= 070) { |
insn->bits3.sampler_gen7.binding_table_index = binding_table_index; |
insn->bits3.sampler_gen7.sampler = sampler; |
insn->bits3.sampler_gen7.msg_type = msg_type; |
insn->bits3.sampler_gen7.simd_mode = simd_mode; |
} else if (p->gen >= 050) { |
insn->bits3.sampler_gen5.binding_table_index = binding_table_index; |
insn->bits3.sampler_gen5.sampler = sampler; |
insn->bits3.sampler_gen5.msg_type = msg_type; |
insn->bits3.sampler_gen5.simd_mode = simd_mode; |
} else if (p->gen >= 045) { |
insn->bits3.sampler_g4x.binding_table_index = binding_table_index; |
insn->bits3.sampler_g4x.sampler = sampler; |
insn->bits3.sampler_g4x.msg_type = msg_type; |
} else { |
insn->bits3.sampler.binding_table_index = binding_table_index; |
insn->bits3.sampler.sampler = sampler; |
insn->bits3.sampler.msg_type = msg_type; |
insn->bits3.sampler.return_format = BRW_SAMPLER_RETURN_FORMAT_FLOAT32; |
} |
} |
|
|
void brw_NOP(struct brw_compile *p) |
{ |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_NOP); |
brw_set_dest(p, insn, __retype_ud(brw_vec4_grf(0,0))); |
brw_set_src0(p, insn, __retype_ud(brw_vec4_grf(0,0))); |
brw_set_src1(p, insn, brw_imm_ud(0x0)); |
} |
|
/*********************************************************************** |
* Comparisons, if/else/endif |
*/ |
|
static void |
push_if_stack(struct brw_compile *p, struct brw_instruction *inst) |
{ |
p->if_stack[p->if_stack_depth] = inst; |
|
p->if_stack_depth++; |
if (p->if_stack_array_size <= p->if_stack_depth) { |
p->if_stack_array_size *= 2; |
p->if_stack = realloc(p->if_stack, sizeof(struct brw_instruction *)*p->if_stack_array_size); |
} |
} |
|
/* EU takes the value from the flag register and pushes it onto some |
* sort of a stack (presumably merging with any flag value already on |
* the stack). Within an if block, the flags at the top of the stack |
* control execution on each channel of the unit, eg. on each of the |
* 16 pixel values in our wm programs. |
* |
* When the matching 'else' instruction is reached (presumably by |
* countdown of the instruction count patched in by our ELSE/ENDIF |
* functions), the relevent flags are inverted. |
* |
* When the matching 'endif' instruction is reached, the flags are |
* popped off. If the stack is now empty, normal execution resumes. |
*/ |
struct brw_instruction * |
brw_IF(struct brw_compile *p, unsigned execute_size) |
{ |
struct brw_instruction *insn; |
|
insn = brw_next_insn(p, BRW_OPCODE_IF); |
|
/* Override the defaults for this instruction: */ |
if (p->gen < 060) { |
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
} else if (p->gen < 070) { |
brw_set_dest(p, insn, brw_imm_w(0)); |
insn->bits1.branch_gen6.jump_count = 0; |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, __retype_d(brw_null_reg())); |
} else { |
brw_set_dest(p, insn, __retype_d(brw_null_reg())); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, brw_imm_ud(0)); |
insn->bits3.break_cont.jip = 0; |
insn->bits3.break_cont.uip = 0; |
} |
|
insn->header.execution_size = execute_size; |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.predicate_control = BRW_PREDICATE_NORMAL; |
insn->header.mask_control = BRW_MASK_ENABLE; |
if (!p->single_program_flow) |
insn->header.thread_control = BRW_THREAD_SWITCH; |
|
p->current->header.predicate_control = BRW_PREDICATE_NONE; |
|
push_if_stack(p, insn); |
return insn; |
} |
|
/* This function is only used for gen6-style IF instructions with an |
* embedded comparison (conditional modifier). It is not used on gen7. |
*/ |
struct brw_instruction * |
gen6_IF(struct brw_compile *p, uint32_t conditional, |
struct brw_reg src0, struct brw_reg src1) |
{ |
struct brw_instruction *insn; |
|
insn = brw_next_insn(p, BRW_OPCODE_IF); |
|
brw_set_dest(p, insn, brw_imm_w(0)); |
if (p->compressed) { |
insn->header.execution_size = BRW_EXECUTE_16; |
} else { |
insn->header.execution_size = BRW_EXECUTE_8; |
} |
insn->bits1.branch_gen6.jump_count = 0; |
brw_set_src0(p, insn, src0); |
brw_set_src1(p, insn, src1); |
|
assert(insn->header.compression_control == BRW_COMPRESSION_NONE); |
assert(insn->header.predicate_control == BRW_PREDICATE_NONE); |
insn->header.destreg__conditionalmod = conditional; |
|
if (!p->single_program_flow) |
insn->header.thread_control = BRW_THREAD_SWITCH; |
|
push_if_stack(p, insn); |
return insn; |
} |
|
/** |
* In single-program-flow (SPF) mode, convert IF and ELSE into ADDs. |
*/ |
static void |
convert_IF_ELSE_to_ADD(struct brw_compile *p, |
struct brw_instruction *if_inst, |
struct brw_instruction *else_inst) |
{ |
/* The next instruction (where the ENDIF would be, if it existed) */ |
struct brw_instruction *next_inst = &p->store[p->nr_insn]; |
|
assert(p->single_program_flow); |
assert(if_inst != NULL && if_inst->header.opcode == BRW_OPCODE_IF); |
assert(else_inst == NULL || else_inst->header.opcode == BRW_OPCODE_ELSE); |
assert(if_inst->header.execution_size == BRW_EXECUTE_1); |
|
/* Convert IF to an ADD instruction that moves the instruction pointer |
* to the first instruction of the ELSE block. If there is no ELSE |
* block, point to where ENDIF would be. Reverse the predicate. |
* |
* There's no need to execute an ENDIF since we don't need to do any |
* stack operations, and if we're currently executing, we just want to |
* continue normally. |
*/ |
if_inst->header.opcode = BRW_OPCODE_ADD; |
if_inst->header.predicate_inverse = 1; |
|
if (else_inst != NULL) { |
/* Convert ELSE to an ADD instruction that points where the ENDIF |
* would be. |
*/ |
else_inst->header.opcode = BRW_OPCODE_ADD; |
|
if_inst->bits3.ud = (else_inst - if_inst + 1) * 16; |
else_inst->bits3.ud = (next_inst - else_inst) * 16; |
} else { |
if_inst->bits3.ud = (next_inst - if_inst) * 16; |
} |
} |
|
/** |
* Patch IF and ELSE instructions with appropriate jump targets. |
*/ |
static void |
patch_IF_ELSE(struct brw_compile *p, |
struct brw_instruction *if_inst, |
struct brw_instruction *else_inst, |
struct brw_instruction *endif_inst) |
{ |
unsigned br = 1; |
|
assert(!p->single_program_flow); |
assert(if_inst != NULL && if_inst->header.opcode == BRW_OPCODE_IF); |
assert(endif_inst != NULL); |
assert(else_inst == NULL || else_inst->header.opcode == BRW_OPCODE_ELSE); |
|
/* Jump count is for 64bit data chunk each, so one 128bit instruction |
* requires 2 chunks. |
*/ |
if (p->gen >= 050) |
br = 2; |
|
assert(endif_inst->header.opcode == BRW_OPCODE_ENDIF); |
endif_inst->header.execution_size = if_inst->header.execution_size; |
|
if (else_inst == NULL) { |
/* Patch IF -> ENDIF */ |
if (p->gen < 060) { |
/* Turn it into an IFF, which means no mask stack operations for |
* all-false and jumping past the ENDIF. |
*/ |
if_inst->header.opcode = BRW_OPCODE_IFF; |
if_inst->bits3.if_else.jump_count = br * (endif_inst - if_inst + 1); |
if_inst->bits3.if_else.pop_count = 0; |
if_inst->bits3.if_else.pad0 = 0; |
} else if (p->gen < 070) { |
/* As of gen6, there is no IFF and IF must point to the ENDIF. */ |
if_inst->bits1.branch_gen6.jump_count = br * (endif_inst - if_inst); |
} else { |
if_inst->bits3.break_cont.uip = br * (endif_inst - if_inst); |
if_inst->bits3.break_cont.jip = br * (endif_inst - if_inst); |
} |
} else { |
else_inst->header.execution_size = if_inst->header.execution_size; |
|
/* Patch IF -> ELSE */ |
if (p->gen < 060) { |
if_inst->bits3.if_else.jump_count = br * (else_inst - if_inst); |
if_inst->bits3.if_else.pop_count = 0; |
if_inst->bits3.if_else.pad0 = 0; |
} else if (p->gen <= 070) { |
if_inst->bits1.branch_gen6.jump_count = br * (else_inst - if_inst + 1); |
} |
|
/* Patch ELSE -> ENDIF */ |
if (p->gen < 060) { |
/* BRW_OPCODE_ELSE pre-gen6 should point just past the |
* matching ENDIF. |
*/ |
else_inst->bits3.if_else.jump_count = br*(endif_inst - else_inst + 1); |
else_inst->bits3.if_else.pop_count = 1; |
else_inst->bits3.if_else.pad0 = 0; |
} else if (p->gen < 070) { |
/* BRW_OPCODE_ELSE on gen6 should point to the matching ENDIF. */ |
else_inst->bits1.branch_gen6.jump_count = br*(endif_inst - else_inst); |
} else { |
/* The IF instruction's JIP should point just past the ELSE */ |
if_inst->bits3.break_cont.jip = br * (else_inst - if_inst + 1); |
/* The IF instruction's UIP and ELSE's JIP should point to ENDIF */ |
if_inst->bits3.break_cont.uip = br * (endif_inst - if_inst); |
else_inst->bits3.break_cont.jip = br * (endif_inst - else_inst); |
} |
} |
} |
|
void |
brw_ELSE(struct brw_compile *p) |
{ |
struct brw_instruction *insn; |
|
insn = brw_next_insn(p, BRW_OPCODE_ELSE); |
|
if (p->gen < 060) { |
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
} else if (p->gen < 070) { |
brw_set_dest(p, insn, brw_imm_w(0)); |
insn->bits1.branch_gen6.jump_count = 0; |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, __retype_d(brw_null_reg())); |
} else { |
brw_set_dest(p, insn, __retype_d(brw_null_reg())); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, brw_imm_ud(0)); |
insn->bits3.break_cont.jip = 0; |
insn->bits3.break_cont.uip = 0; |
} |
|
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.mask_control = BRW_MASK_ENABLE; |
if (!p->single_program_flow) |
insn->header.thread_control = BRW_THREAD_SWITCH; |
|
push_if_stack(p, insn); |
} |
|
void |
brw_ENDIF(struct brw_compile *p) |
{ |
struct brw_instruction *insn; |
struct brw_instruction *else_inst = NULL; |
struct brw_instruction *if_inst = NULL; |
|
/* Pop the IF and (optional) ELSE instructions from the stack */ |
p->if_stack_depth--; |
if (p->if_stack[p->if_stack_depth]->header.opcode == BRW_OPCODE_ELSE) { |
else_inst = p->if_stack[p->if_stack_depth]; |
p->if_stack_depth--; |
} |
if_inst = p->if_stack[p->if_stack_depth]; |
|
if (p->single_program_flow) { |
/* ENDIF is useless; don't bother emitting it. */ |
convert_IF_ELSE_to_ADD(p, if_inst, else_inst); |
return; |
} |
|
insn = brw_next_insn(p, BRW_OPCODE_ENDIF); |
|
if (p->gen < 060) { |
brw_set_dest(p, insn, __retype_ud(brw_vec4_grf(0,0))); |
brw_set_src0(p, insn, __retype_ud(brw_vec4_grf(0,0))); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
} else if (p->gen < 070) { |
brw_set_dest(p, insn, brw_imm_w(0)); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, __retype_d(brw_null_reg())); |
} else { |
brw_set_dest(p, insn, __retype_d(brw_null_reg())); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, brw_imm_ud(0)); |
} |
|
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.mask_control = BRW_MASK_ENABLE; |
insn->header.thread_control = BRW_THREAD_SWITCH; |
|
/* Also pop item off the stack in the endif instruction: */ |
if (p->gen < 060) { |
insn->bits3.if_else.jump_count = 0; |
insn->bits3.if_else.pop_count = 1; |
insn->bits3.if_else.pad0 = 0; |
} else if (p->gen < 070) { |
insn->bits1.branch_gen6.jump_count = 2; |
} else { |
insn->bits3.break_cont.jip = 2; |
} |
patch_IF_ELSE(p, if_inst, else_inst, insn); |
} |
|
struct brw_instruction *brw_BREAK(struct brw_compile *p, int pop_count) |
{ |
struct brw_instruction *insn; |
|
insn = brw_next_insn(p, BRW_OPCODE_BREAK); |
if (p->gen >= 060) { |
brw_set_dest(p, insn, __retype_d(brw_null_reg())); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
} else { |
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
insn->bits3.if_else.pad0 = 0; |
insn->bits3.if_else.pop_count = pop_count; |
} |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.execution_size = BRW_EXECUTE_8; |
|
return insn; |
} |
|
struct brw_instruction *gen6_CONT(struct brw_compile *p, |
struct brw_instruction *do_insn) |
{ |
struct brw_instruction *insn; |
|
insn = brw_next_insn(p, BRW_OPCODE_CONTINUE); |
brw_set_dest(p, insn, __retype_d(brw_null_reg())); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
|
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.execution_size = BRW_EXECUTE_8; |
return insn; |
} |
|
struct brw_instruction *brw_CONT(struct brw_compile *p, int pop_count) |
{ |
struct brw_instruction *insn; |
insn = brw_next_insn(p, BRW_OPCODE_CONTINUE); |
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d(0x0)); |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.execution_size = BRW_EXECUTE_8; |
/* insn->header.mask_control = BRW_MASK_DISABLE; */ |
insn->bits3.if_else.pad0 = 0; |
insn->bits3.if_else.pop_count = pop_count; |
return insn; |
} |
|
/* DO/WHILE loop: |
* |
* The DO/WHILE is just an unterminated loop -- break or continue are |
* used for control within the loop. We have a few ways they can be |
* done. |
* |
* For uniform control flow, the WHILE is just a jump, so ADD ip, ip, |
* jip and no DO instruction. |
* |
* For non-uniform control flow pre-gen6, there's a DO instruction to |
* push the mask, and a WHILE to jump back, and BREAK to get out and |
* pop the mask. |
* |
* For gen6, there's no more mask stack, so no need for DO. WHILE |
* just points back to the first instruction of the loop. |
*/ |
struct brw_instruction *brw_DO(struct brw_compile *p, unsigned execute_size) |
{ |
if (p->gen >= 060 || p->single_program_flow) { |
return &p->store[p->nr_insn]; |
} else { |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_DO); |
|
/* Override the defaults for this instruction: |
*/ |
brw_set_dest(p, insn, brw_null_reg()); |
brw_set_src0(p, insn, brw_null_reg()); |
brw_set_src1(p, insn, brw_null_reg()); |
|
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.execution_size = execute_size; |
insn->header.predicate_control = BRW_PREDICATE_NONE; |
/* insn->header.mask_control = BRW_MASK_ENABLE; */ |
/* insn->header.mask_control = BRW_MASK_DISABLE; */ |
|
return insn; |
} |
} |
|
struct brw_instruction *brw_WHILE(struct brw_compile *p, |
struct brw_instruction *do_insn) |
{ |
struct brw_instruction *insn; |
unsigned br = 1; |
|
if (p->gen >= 050) |
br = 2; |
|
if (p->gen >= 070) { |
insn = brw_next_insn(p, BRW_OPCODE_WHILE); |
|
brw_set_dest(p, insn, __retype_d(brw_null_reg())); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, brw_imm_ud(0)); |
insn->bits3.break_cont.jip = br * (do_insn - insn); |
|
insn->header.execution_size = BRW_EXECUTE_8; |
} else if (p->gen >= 060) { |
insn = brw_next_insn(p, BRW_OPCODE_WHILE); |
|
brw_set_dest(p, insn, brw_imm_w(0)); |
insn->bits1.branch_gen6.jump_count = br * (do_insn - insn); |
brw_set_src0(p, insn, __retype_d(brw_null_reg())); |
brw_set_src1(p, insn, __retype_d(brw_null_reg())); |
|
insn->header.execution_size = BRW_EXECUTE_8; |
} else { |
if (p->single_program_flow) { |
insn = brw_next_insn(p, BRW_OPCODE_ADD); |
|
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d((do_insn - insn) * 16)); |
insn->header.execution_size = BRW_EXECUTE_1; |
} else { |
insn = brw_next_insn(p, BRW_OPCODE_WHILE); |
|
assert(do_insn->header.opcode == BRW_OPCODE_DO); |
|
brw_set_dest(p, insn, brw_ip_reg()); |
brw_set_src0(p, insn, brw_ip_reg()); |
brw_set_src1(p, insn, brw_imm_d(0)); |
|
insn->header.execution_size = do_insn->header.execution_size; |
insn->bits3.if_else.jump_count = br * (do_insn - insn + 1); |
insn->bits3.if_else.pop_count = 0; |
insn->bits3.if_else.pad0 = 0; |
} |
} |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
p->current->header.predicate_control = BRW_PREDICATE_NONE; |
|
return insn; |
} |
|
/* FORWARD JUMPS: |
*/ |
void brw_land_fwd_jump(struct brw_compile *p, |
struct brw_instruction *jmp_insn) |
{ |
struct brw_instruction *landing = &p->store[p->nr_insn]; |
unsigned jmpi = 1; |
|
if (p->gen >= 050) |
jmpi = 2; |
|
assert(jmp_insn->header.opcode == BRW_OPCODE_JMPI); |
assert(jmp_insn->bits1.da1.src1_reg_file == BRW_IMMEDIATE_VALUE); |
|
jmp_insn->bits3.ud = jmpi * ((landing - jmp_insn) - 1); |
} |
|
|
|
/* To integrate with the above, it makes sense that the comparison |
* instruction should populate the flag register. It might be simpler |
* just to use the flag reg for most WM tasks? |
*/ |
void brw_CMP(struct brw_compile *p, |
struct brw_reg dest, |
unsigned conditional, |
struct brw_reg src0, |
struct brw_reg src1) |
{ |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_CMP); |
|
insn->header.destreg__conditionalmod = conditional; |
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src0); |
brw_set_src1(p, insn, src1); |
|
/* Make it so that future instructions will use the computed flag |
* value until brw_set_predicate_control_flag_value() is called |
* again. |
*/ |
if (dest.file == BRW_ARCHITECTURE_REGISTER_FILE && |
dest.nr == 0) { |
p->current->header.predicate_control = BRW_PREDICATE_NORMAL; |
p->flag_value = 0xff; |
} |
} |
|
/* Issue 'wait' instruction for n1, host could program MMIO |
to wake up thread. */ |
void brw_WAIT(struct brw_compile *p) |
{ |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_WAIT); |
struct brw_reg src = brw_notification_1_reg(); |
|
brw_set_dest(p, insn, src); |
brw_set_src0(p, insn, src); |
brw_set_src1(p, insn, brw_null_reg()); |
insn->header.execution_size = 0; /* must */ |
insn->header.predicate_control = 0; |
insn->header.compression_control = 0; |
} |
|
/*********************************************************************** |
* Helpers for the various SEND message types: |
*/ |
|
/** Extended math function, float[8]. |
*/ |
void brw_math(struct brw_compile *p, |
struct brw_reg dest, |
unsigned function, |
unsigned saturate, |
unsigned msg_reg_nr, |
struct brw_reg src, |
unsigned data_type, |
unsigned precision) |
{ |
if (p->gen >= 060) { |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_MATH); |
|
assert(dest.file == BRW_GENERAL_REGISTER_FILE); |
assert(src.file == BRW_GENERAL_REGISTER_FILE); |
|
assert(dest.hstride == BRW_HORIZONTAL_STRIDE_1); |
assert(src.hstride == BRW_HORIZONTAL_STRIDE_1); |
|
/* Source modifiers are ignored for extended math instructions. */ |
assert(!src.negate); |
assert(!src.abs); |
|
if (function != BRW_MATH_FUNCTION_INT_DIV_QUOTIENT && |
function != BRW_MATH_FUNCTION_INT_DIV_QUOTIENT_AND_REMAINDER) { |
assert(src.type == BRW_REGISTER_TYPE_F); |
} |
|
/* Math is the same ISA format as other opcodes, except that CondModifier |
* becomes FC[3:0] and ThreadCtrl becomes FC[5:4]. |
*/ |
insn->header.destreg__conditionalmod = function; |
insn->header.saturate = saturate; |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src); |
brw_set_src1(p, insn, brw_null_reg()); |
} else { |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_SEND); |
/* Example code doesn't set predicate_control for send |
* instructions. |
*/ |
insn->header.predicate_control = 0; |
insn->header.destreg__conditionalmod = msg_reg_nr; |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src); |
brw_set_math_message(p, insn, function, |
src.type == BRW_REGISTER_TYPE_D, |
precision, |
saturate, |
data_type); |
} |
} |
|
/** Extended math function, float[8]. |
*/ |
void brw_math2(struct brw_compile *p, |
struct brw_reg dest, |
unsigned function, |
struct brw_reg src0, |
struct brw_reg src1) |
{ |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_MATH); |
|
assert(dest.file == BRW_GENERAL_REGISTER_FILE); |
assert(src0.file == BRW_GENERAL_REGISTER_FILE); |
assert(src1.file == BRW_GENERAL_REGISTER_FILE); |
|
assert(dest.hstride == BRW_HORIZONTAL_STRIDE_1); |
assert(src0.hstride == BRW_HORIZONTAL_STRIDE_1); |
assert(src1.hstride == BRW_HORIZONTAL_STRIDE_1); |
|
if (function != BRW_MATH_FUNCTION_INT_DIV_QUOTIENT && |
function != BRW_MATH_FUNCTION_INT_DIV_QUOTIENT_AND_REMAINDER) { |
assert(src0.type == BRW_REGISTER_TYPE_F); |
assert(src1.type == BRW_REGISTER_TYPE_F); |
} |
|
/* Source modifiers are ignored for extended math instructions. */ |
assert(!src0.negate); |
assert(!src0.abs); |
assert(!src1.negate); |
assert(!src1.abs); |
|
/* Math is the same ISA format as other opcodes, except that CondModifier |
* becomes FC[3:0] and ThreadCtrl becomes FC[5:4]. |
*/ |
insn->header.destreg__conditionalmod = function; |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src0); |
brw_set_src1(p, insn, src1); |
} |
|
/** |
* Extended math function, float[16]. |
* Use 2 send instructions. |
*/ |
void brw_math_16(struct brw_compile *p, |
struct brw_reg dest, |
unsigned function, |
unsigned saturate, |
unsigned msg_reg_nr, |
struct brw_reg src, |
unsigned precision) |
{ |
struct brw_instruction *insn; |
|
if (p->gen >= 060) { |
insn = brw_next_insn(p, BRW_OPCODE_MATH); |
|
/* Math is the same ISA format as other opcodes, except that CondModifier |
* becomes FC[3:0] and ThreadCtrl becomes FC[5:4]. |
*/ |
insn->header.destreg__conditionalmod = function; |
insn->header.saturate = saturate; |
|
/* Source modifiers are ignored for extended math instructions. */ |
assert(!src.negate); |
assert(!src.abs); |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src); |
brw_set_src1(p, insn, brw_null_reg()); |
return; |
} |
|
/* First instruction: |
*/ |
brw_push_insn_state(p); |
brw_set_predicate_control_flag_value(p, 0xff); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
insn->header.destreg__conditionalmod = msg_reg_nr; |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src); |
brw_set_math_message(p, insn, function, |
BRW_MATH_INTEGER_UNSIGNED, |
precision, |
saturate, |
BRW_MATH_DATA_VECTOR); |
|
/* Second instruction: |
*/ |
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
insn->header.compression_control = BRW_COMPRESSION_2NDHALF; |
insn->header.destreg__conditionalmod = msg_reg_nr+1; |
|
brw_set_dest(p, insn, __offset(dest,1)); |
brw_set_src0(p, insn, src); |
brw_set_math_message(p, insn, function, |
BRW_MATH_INTEGER_UNSIGNED, |
precision, |
saturate, |
BRW_MATH_DATA_VECTOR); |
|
brw_pop_insn_state(p); |
} |
|
/** |
* Write a block of OWORDs (half a GRF each) from the scratch buffer, |
* using a constant offset per channel. |
* |
* The offset must be aligned to oword size (16 bytes). Used for |
* register spilling. |
*/ |
void brw_oword_block_write_scratch(struct brw_compile *p, |
struct brw_reg mrf, |
int num_regs, |
unsigned offset) |
{ |
uint32_t msg_control, msg_type; |
int mlen; |
|
if (p->gen >= 060) |
offset /= 16; |
|
mrf = __retype_ud(mrf); |
|
if (num_regs == 1) { |
msg_control = BRW_DATAPORT_OWORD_BLOCK_2_OWORDS; |
mlen = 2; |
} else { |
msg_control = BRW_DATAPORT_OWORD_BLOCK_4_OWORDS; |
mlen = 3; |
} |
|
/* Set up the message header. This is g0, with g0.2 filled with |
* the offset. We don't want to leave our offset around in g0 or |
* it'll screw up texture samples, so set it up inside the message |
* reg. |
*/ |
{ |
brw_push_insn_state(p); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
|
brw_MOV(p, mrf, __retype_ud(brw_vec8_grf(0, 0))); |
|
/* set message header global offset field (reg 0, element 2) */ |
brw_MOV(p, |
__retype_ud(brw_vec1_reg(BRW_MESSAGE_REGISTER_FILE, mrf.nr, 2)), |
brw_imm_ud(offset)); |
|
brw_pop_insn_state(p); |
} |
|
{ |
struct brw_reg dest; |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_SEND); |
int send_commit_msg; |
struct brw_reg src_header = __retype_uw(brw_vec8_grf(0, 0)); |
|
if (insn->header.compression_control != BRW_COMPRESSION_NONE) { |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
src_header = vec16(src_header); |
} |
assert(insn->header.predicate_control == BRW_PREDICATE_NONE); |
insn->header.destreg__conditionalmod = mrf.nr; |
|
/* Until gen6, writes followed by reads from the same location |
* are not guaranteed to be ordered unless write_commit is set. |
* If set, then a no-op write is issued to the destination |
* register to set a dependency, and a read from the destination |
* can be used to ensure the ordering. |
* |
* For gen6, only writes between different threads need ordering |
* protection. Our use of DP writes is all about register |
* spilling within a thread. |
*/ |
if (p->gen >= 060) { |
dest = __retype_uw(vec16(brw_null_reg())); |
send_commit_msg = 0; |
} else { |
dest = src_header; |
send_commit_msg = 1; |
} |
|
brw_set_dest(p, insn, dest); |
if (p->gen >= 060) { |
brw_set_src0(p, insn, mrf); |
} else { |
brw_set_src0(p, insn, brw_null_reg()); |
} |
|
if (p->gen >= 060) |
msg_type = GEN6_DATAPORT_WRITE_MESSAGE_OWORD_BLOCK_WRITE; |
else |
msg_type = BRW_DATAPORT_WRITE_MESSAGE_OWORD_BLOCK_WRITE; |
|
brw_set_dp_write_message(p, |
insn, |
255, /* binding table index (255=stateless) */ |
msg_control, |
msg_type, |
mlen, |
true, /* header_present */ |
0, /* pixel scoreboard */ |
send_commit_msg, /* response_length */ |
0, /* eot */ |
send_commit_msg); |
} |
} |
|
|
/** |
* Read a block of owords (half a GRF each) from the scratch buffer |
* using a constant index per channel. |
* |
* Offset must be aligned to oword size (16 bytes). Used for register |
* spilling. |
*/ |
void |
brw_oword_block_read_scratch(struct brw_compile *p, |
struct brw_reg dest, |
struct brw_reg mrf, |
int num_regs, |
unsigned offset) |
{ |
uint32_t msg_control; |
int rlen; |
|
if (p->gen >= 060) |
offset /= 16; |
|
mrf = __retype_ud(mrf); |
dest = __retype_uw(dest); |
|
if (num_regs == 1) { |
msg_control = BRW_DATAPORT_OWORD_BLOCK_2_OWORDS; |
rlen = 1; |
} else { |
msg_control = BRW_DATAPORT_OWORD_BLOCK_4_OWORDS; |
rlen = 2; |
} |
|
{ |
brw_push_insn_state(p); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
|
brw_MOV(p, mrf, __retype_ud(brw_vec8_grf(0, 0))); |
|
/* set message header global offset field (reg 0, element 2) */ |
brw_MOV(p, |
__retype_ud(brw_vec1_reg(BRW_MESSAGE_REGISTER_FILE, mrf.nr, 2)), |
brw_imm_ud(offset)); |
|
brw_pop_insn_state(p); |
} |
|
{ |
struct brw_instruction *insn = brw_next_insn(p, BRW_OPCODE_SEND); |
|
assert(insn->header.predicate_control == 0); |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.destreg__conditionalmod = mrf.nr; |
|
brw_set_dest(p, insn, dest); /* UW? */ |
if (p->gen >= 060) { |
brw_set_src0(p, insn, mrf); |
} else { |
brw_set_src0(p, insn, brw_null_reg()); |
} |
|
brw_set_dp_read_message(p, |
insn, |
255, /* binding table index (255=stateless) */ |
msg_control, |
BRW_DATAPORT_READ_MESSAGE_OWORD_BLOCK_READ, /* msg_type */ |
BRW_DATAPORT_READ_TARGET_RENDER_CACHE, |
1, /* msg_length */ |
rlen); |
} |
} |
|
/** |
* Read a float[4] vector from the data port Data Cache (const buffer). |
* Location (in buffer) should be a multiple of 16. |
* Used for fetching shader constants. |
*/ |
void brw_oword_block_read(struct brw_compile *p, |
struct brw_reg dest, |
struct brw_reg mrf, |
uint32_t offset, |
uint32_t bind_table_index) |
{ |
struct brw_instruction *insn; |
|
/* On newer hardware, offset is in units of owords. */ |
if (p->gen >= 060) |
offset /= 16; |
|
mrf = __retype_ud(mrf); |
|
brw_push_insn_state(p); |
brw_set_predicate_control(p, BRW_PREDICATE_NONE); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
|
brw_MOV(p, mrf, __retype_ud(brw_vec8_grf(0, 0))); |
|
/* set message header global offset field (reg 0, element 2) */ |
brw_MOV(p, |
__retype_ud(brw_vec1_reg(BRW_MESSAGE_REGISTER_FILE, mrf.nr, 2)), |
brw_imm_ud(offset)); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
insn->header.destreg__conditionalmod = mrf.nr; |
|
/* cast dest to a uword[8] vector */ |
dest = __retype_uw(vec8(dest)); |
|
brw_set_dest(p, insn, dest); |
if (p->gen >= 060) { |
brw_set_src0(p, insn, mrf); |
} else { |
brw_set_src0(p, insn, brw_null_reg()); |
} |
|
brw_set_dp_read_message(p, |
insn, |
bind_table_index, |
BRW_DATAPORT_OWORD_BLOCK_1_OWORDLOW, |
BRW_DATAPORT_READ_MESSAGE_OWORD_BLOCK_READ, |
BRW_DATAPORT_READ_TARGET_DATA_CACHE, |
1, /* msg_length */ |
1); /* response_length (1 reg, 2 owords!) */ |
|
brw_pop_insn_state(p); |
} |
|
/** |
* Read a set of dwords from the data port Data Cache (const buffer). |
* |
* Location (in buffer) appears as UD offsets in the register after |
* the provided mrf header reg. |
*/ |
void brw_dword_scattered_read(struct brw_compile *p, |
struct brw_reg dest, |
struct brw_reg mrf, |
uint32_t bind_table_index) |
{ |
struct brw_instruction *insn; |
|
mrf = __retype_ud(mrf); |
|
brw_push_insn_state(p); |
brw_set_predicate_control(p, BRW_PREDICATE_NONE); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
brw_MOV(p, mrf, __retype_ud(brw_vec8_grf(0, 0))); |
brw_pop_insn_state(p); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
insn->header.destreg__conditionalmod = mrf.nr; |
|
/* cast dest to a uword[8] vector */ |
dest = __retype_uw(vec8(dest)); |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, brw_null_reg()); |
|
brw_set_dp_read_message(p, |
insn, |
bind_table_index, |
BRW_DATAPORT_DWORD_SCATTERED_BLOCK_8DWORDS, |
BRW_DATAPORT_READ_MESSAGE_DWORD_SCATTERED_READ, |
BRW_DATAPORT_READ_TARGET_DATA_CACHE, |
2, /* msg_length */ |
1); /* response_length */ |
} |
|
/** |
* Read float[4] constant(s) from VS constant buffer. |
* For relative addressing, two float[4] constants will be read into 'dest'. |
* Otherwise, one float[4] constant will be read into the lower half of 'dest'. |
*/ |
void brw_dp_READ_4_vs(struct brw_compile *p, |
struct brw_reg dest, |
unsigned location, |
unsigned bind_table_index) |
{ |
struct brw_instruction *insn; |
unsigned msg_reg_nr = 1; |
|
if (p->gen >= 060) |
location /= 16; |
|
/* Setup MRF[1] with location/offset into const buffer */ |
brw_push_insn_state(p); |
brw_set_access_mode(p, BRW_ALIGN_1); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
brw_set_predicate_control(p, BRW_PREDICATE_NONE); |
brw_MOV(p, __retype_ud(brw_vec1_reg(BRW_MESSAGE_REGISTER_FILE, msg_reg_nr, 2)), |
brw_imm_ud(location)); |
brw_pop_insn_state(p); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
|
insn->header.predicate_control = BRW_PREDICATE_NONE; |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.destreg__conditionalmod = msg_reg_nr; |
insn->header.mask_control = BRW_MASK_DISABLE; |
|
brw_set_dest(p, insn, dest); |
if (p->gen >= 060) { |
brw_set_src0(p, insn, brw_message_reg(msg_reg_nr)); |
} else { |
brw_set_src0(p, insn, brw_null_reg()); |
} |
|
brw_set_dp_read_message(p, |
insn, |
bind_table_index, |
0, |
BRW_DATAPORT_READ_MESSAGE_OWORD_BLOCK_READ, /* msg_type */ |
BRW_DATAPORT_READ_TARGET_DATA_CACHE, |
1, /* msg_length */ |
1); /* response_length (1 Oword) */ |
} |
|
/** |
* Read a float[4] constant per vertex from VS constant buffer, with |
* relative addressing. |
*/ |
void brw_dp_READ_4_vs_relative(struct brw_compile *p, |
struct brw_reg dest, |
struct brw_reg addr_reg, |
unsigned offset, |
unsigned bind_table_index) |
{ |
struct brw_reg src = brw_vec8_grf(0, 0); |
struct brw_instruction *insn; |
int msg_type; |
|
/* Setup MRF[1] with offset into const buffer */ |
brw_push_insn_state(p); |
brw_set_access_mode(p, BRW_ALIGN_1); |
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
brw_set_predicate_control(p, BRW_PREDICATE_NONE); |
|
/* M1.0 is block offset 0, M1.4 is block offset 1, all other |
* fields ignored. |
*/ |
brw_ADD(p, __retype_d(brw_message_reg(1)), |
addr_reg, brw_imm_d(offset)); |
brw_pop_insn_state(p); |
|
gen6_resolve_implied_move(p, &src, 0); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
insn->header.predicate_control = BRW_PREDICATE_NONE; |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
insn->header.destreg__conditionalmod = 0; |
insn->header.mask_control = BRW_MASK_DISABLE; |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src); |
|
if (p->gen >= 060) |
msg_type = GEN6_DATAPORT_READ_MESSAGE_OWORD_DUAL_BLOCK_READ; |
else if (p->gen >= 045) |
msg_type = G45_DATAPORT_READ_MESSAGE_OWORD_DUAL_BLOCK_READ; |
else |
msg_type = BRW_DATAPORT_READ_MESSAGE_OWORD_DUAL_BLOCK_READ; |
|
brw_set_dp_read_message(p, |
insn, |
bind_table_index, |
BRW_DATAPORT_OWORD_DUAL_BLOCK_1OWORD, |
msg_type, |
BRW_DATAPORT_READ_TARGET_DATA_CACHE, |
2, /* msg_length */ |
1); /* response_length */ |
} |
|
void brw_fb_WRITE(struct brw_compile *p, |
int dispatch_width, |
unsigned msg_reg_nr, |
struct brw_reg src0, |
unsigned msg_control, |
unsigned binding_table_index, |
unsigned msg_length, |
unsigned response_length, |
bool eot, |
bool header_present) |
{ |
struct brw_instruction *insn; |
unsigned msg_type; |
struct brw_reg dest; |
|
if (dispatch_width == 16) |
dest = __retype_uw(vec16(brw_null_reg())); |
else |
dest = __retype_uw(vec8(brw_null_reg())); |
|
if (p->gen >= 060 && binding_table_index == 0) { |
insn = brw_next_insn(p, BRW_OPCODE_SENDC); |
} else { |
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
} |
/* The execution mask is ignored for render target writes. */ |
insn->header.predicate_control = 0; |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
|
if (p->gen >= 060) { |
/* headerless version, just submit color payload */ |
src0 = brw_message_reg(msg_reg_nr); |
|
msg_type = GEN6_DATAPORT_WRITE_MESSAGE_RENDER_TARGET_WRITE; |
} else { |
insn->header.destreg__conditionalmod = msg_reg_nr; |
|
msg_type = BRW_DATAPORT_WRITE_MESSAGE_RENDER_TARGET_WRITE; |
} |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src0); |
brw_set_dp_write_message(p, |
insn, |
binding_table_index, |
msg_control, |
msg_type, |
msg_length, |
header_present, |
eot, |
response_length, |
eot, |
0 /* send_commit_msg */); |
} |
|
/** |
* Texture sample instruction. |
* Note: the msg_type plus msg_length values determine exactly what kind |
* of sampling operation is performed. See volume 4, page 161 of docs. |
*/ |
void brw_SAMPLE(struct brw_compile *p, |
struct brw_reg dest, |
unsigned msg_reg_nr, |
struct brw_reg src0, |
unsigned binding_table_index, |
unsigned sampler, |
unsigned writemask, |
unsigned msg_type, |
unsigned response_length, |
unsigned msg_length, |
bool header_present, |
unsigned simd_mode) |
{ |
assert(writemask); |
|
if (p->gen < 050 || writemask != WRITEMASK_XYZW) { |
struct brw_reg m1 = brw_message_reg(msg_reg_nr); |
|
writemask = ~writemask & WRITEMASK_XYZW; |
|
brw_push_insn_state(p); |
|
brw_set_compression_control(p, BRW_COMPRESSION_NONE); |
brw_set_mask_control(p, BRW_MASK_DISABLE); |
|
brw_MOV(p, __retype_ud(m1), __retype_ud(brw_vec8_grf(0,0))); |
brw_MOV(p, get_element_ud(m1, 2), brw_imm_ud(writemask << 12)); |
|
brw_pop_insn_state(p); |
|
src0 = __retype_uw(brw_null_reg()); |
} |
|
{ |
struct brw_instruction *insn; |
|
gen6_resolve_implied_move(p, &src0, msg_reg_nr); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
insn->header.predicate_control = 0; /* XXX */ |
insn->header.compression_control = BRW_COMPRESSION_NONE; |
if (p->gen < 060) |
insn->header.destreg__conditionalmod = msg_reg_nr; |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src0); |
brw_set_sampler_message(p, insn, |
binding_table_index, |
sampler, |
msg_type, |
response_length, |
msg_length, |
header_present, |
simd_mode); |
} |
} |
|
/* All these variables are pretty confusing - we might be better off |
* using bitmasks and macros for this, in the old style. Or perhaps |
* just having the caller instantiate the fields in dword3 itself. |
*/ |
void brw_urb_WRITE(struct brw_compile *p, |
struct brw_reg dest, |
unsigned msg_reg_nr, |
struct brw_reg src0, |
bool allocate, |
bool used, |
unsigned msg_length, |
unsigned response_length, |
bool eot, |
bool writes_complete, |
unsigned offset, |
unsigned swizzle) |
{ |
struct brw_instruction *insn; |
|
gen6_resolve_implied_move(p, &src0, msg_reg_nr); |
|
if (p->gen >= 070) { |
/* Enable Channel Masks in the URB_WRITE_HWORD message header */ |
brw_push_insn_state(p); |
brw_set_access_mode(p, BRW_ALIGN_1); |
brw_OR(p, __retype_ud(brw_vec1_reg(BRW_MESSAGE_REGISTER_FILE, msg_reg_nr, 5)), |
__retype_ud(brw_vec1_grf(0, 5)), |
brw_imm_ud(0xff00)); |
brw_pop_insn_state(p); |
} |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
|
assert(msg_length < BRW_MAX_MRF); |
|
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src0); |
brw_set_src1(p, insn, brw_imm_d(0)); |
|
if (p->gen <= 060) |
insn->header.destreg__conditionalmod = msg_reg_nr; |
|
brw_set_urb_message(p, |
insn, |
allocate, |
used, |
msg_length, |
response_length, |
eot, |
writes_complete, |
offset, |
swizzle); |
} |
|
static int |
brw_find_next_block_end(struct brw_compile *p, int start) |
{ |
int ip; |
|
for (ip = start + 1; ip < p->nr_insn; ip++) { |
struct brw_instruction *insn = &p->store[ip]; |
|
switch (insn->header.opcode) { |
case BRW_OPCODE_ENDIF: |
case BRW_OPCODE_ELSE: |
case BRW_OPCODE_WHILE: |
return ip; |
} |
} |
assert(!"not reached"); |
return start + 1; |
} |
|
/* There is no DO instruction on gen6, so to find the end of the loop |
* we have to see if the loop is jumping back before our start |
* instruction. |
*/ |
static int |
brw_find_loop_end(struct brw_compile *p, int start) |
{ |
int ip; |
int br = 2; |
|
for (ip = start + 1; ip < p->nr_insn; ip++) { |
struct brw_instruction *insn = &p->store[ip]; |
|
if (insn->header.opcode == BRW_OPCODE_WHILE) { |
int jip = p->gen <= 070 ? insn->bits1.branch_gen6.jump_count |
: insn->bits3.break_cont.jip; |
if (ip + jip / br <= start) |
return ip; |
} |
} |
assert(!"not reached"); |
return start + 1; |
} |
|
/* After program generation, go back and update the UIP and JIP of |
* BREAK and CONT instructions to their correct locations. |
*/ |
void |
brw_set_uip_jip(struct brw_compile *p) |
{ |
int ip; |
int br = 2; |
|
if (p->gen <= 060) |
return; |
|
for (ip = 0; ip < p->nr_insn; ip++) { |
struct brw_instruction *insn = &p->store[ip]; |
|
switch (insn->header.opcode) { |
case BRW_OPCODE_BREAK: |
insn->bits3.break_cont.jip = br * (brw_find_next_block_end(p, ip) - ip); |
/* Gen7 UIP points to WHILE; Gen6 points just after it */ |
insn->bits3.break_cont.uip = |
br * (brw_find_loop_end(p, ip) - ip + (p->gen <= 070 ? 1 : 0)); |
break; |
case BRW_OPCODE_CONTINUE: |
insn->bits3.break_cont.jip = br * (brw_find_next_block_end(p, ip) - ip); |
insn->bits3.break_cont.uip = br * (brw_find_loop_end(p, ip) - ip); |
|
assert(insn->bits3.break_cont.uip != 0); |
assert(insn->bits3.break_cont.jip != 0); |
break; |
} |
} |
} |
|
void brw_ff_sync(struct brw_compile *p, |
struct brw_reg dest, |
unsigned msg_reg_nr, |
struct brw_reg src0, |
bool allocate, |
unsigned response_length, |
bool eot) |
{ |
struct brw_instruction *insn; |
|
gen6_resolve_implied_move(p, &src0, msg_reg_nr); |
|
insn = brw_next_insn(p, BRW_OPCODE_SEND); |
brw_set_dest(p, insn, dest); |
brw_set_src0(p, insn, src0); |
brw_set_src1(p, insn, brw_imm_d(0)); |
|
if (p->gen < 060) |
insn->header.destreg__conditionalmod = msg_reg_nr; |
|
brw_set_ff_sync_message(p, |
insn, |
allocate, |
response_length, |
eot); |
} |