0,0 → 1,3612 |
/* Main header file for the bfd library -- portable access to object files. |
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, |
2000, 2001 |
Free Software Foundation, Inc. |
Contributed by Cygnus Support. |
|
** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them; |
** instead, change bfd-in.h or the other BFD source files processed to |
** generate these files. |
|
This file is part of BFD, the Binary File Descriptor library. |
|
This program is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
|
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
|
You should have received a copy of the GNU General Public License |
along with this program; if not, write to the Free Software |
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
|
/* bfd.h -- The only header file required by users of the bfd library |
|
The bfd.h file is generated from bfd-in.h and various .c files; if you |
change it, your changes will probably be lost. |
|
All the prototypes and definitions following the comment "THE FOLLOWING |
IS EXTRACTED FROM THE SOURCE" are extracted from the source files for |
BFD. If you change it, someone oneday will extract it from the source |
again, and your changes will be lost. To save yourself from this bind, |
change the definitions in the source in the bfd directory. Type "make |
docs" and then "make headers" in that directory, and magically this file |
will change to reflect your changes. |
|
If you don't have the tools to perform the extraction, then you are |
safe from someone on your system trampling over your header files. |
You should still maintain the equivalence between the source and this |
file though; every change you make to the .c file should be reflected |
here. */ |
|
#ifndef __BFD_H_SEEN__ |
#define __BFD_H_SEEN__ |
|
#ifdef __cplusplus |
extern "C" { |
#endif |
|
#include "ansidecl.h" |
|
/* These two lines get substitutions done by commands in Makefile.in. */ |
#define BFD_VERSION "2.11.90.0.8" |
#define BFD_ARCH_SIZE 32 |
#define BFD_HOST_64BIT_LONG 0 |
#if 0 |
#define BFD_HOST_64_BIT |
#define BFD_HOST_U_64_BIT |
#endif |
|
#if BFD_ARCH_SIZE >= 64 |
#define BFD64 |
#endif |
|
#ifndef INLINE |
#if __GNUC__ >= 2 |
#define INLINE __inline__ |
#else |
#define INLINE |
#endif |
#endif |
|
/* forward declaration */ |
typedef struct _bfd bfd; |
|
/* To squelch erroneous compiler warnings ("illegal pointer |
combination") from the SVR3 compiler, we would like to typedef |
boolean to int (it doesn't like functions which return boolean. |
Making sure they are never implicitly declared to return int |
doesn't seem to help). But this file is not configured based on |
the host. */ |
/* General rules: functions which are boolean return true on success |
and false on failure (unless they're a predicate). -- bfd.doc */ |
/* I'm sure this is going to break something and someone is going to |
force me to change it. */ |
/* typedef enum boolean {false, true} boolean; */ |
/* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */ |
/* It gets worse if the host also defines a true/false enum... -sts */ |
/* And even worse if your compiler has built-in boolean types... -law */ |
#if defined (__GNUG__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6)) |
#define TRUE_FALSE_ALREADY_DEFINED |
#endif |
#ifdef MPW |
/* Pre-emptive strike - get the file with the enum. */ |
#include <Types.h> |
#define TRUE_FALSE_ALREADY_DEFINED |
#endif /* MPW */ |
#ifndef TRUE_FALSE_ALREADY_DEFINED |
typedef enum bfd_boolean {false, true} boolean; |
#define BFD_TRUE_FALSE |
#else |
/* Use enum names that will appear nowhere else. */ |
typedef enum bfd_boolean {bfd_fffalse, bfd_tttrue} boolean; |
#endif |
|
/* A pointer to a position in a file. */ |
/* FIXME: This should be using off_t from <sys/types.h>. |
For now, try to avoid breaking stuff by not including <sys/types.h> here. |
This will break on systems with 64-bit file offsets (e.g. 4.4BSD). |
Probably the best long-term answer is to avoid using file_ptr AND off_t |
in this header file, and to handle this in the BFD implementation |
rather than in its interface. */ |
/* typedef off_t file_ptr; */ |
typedef long int file_ptr; |
|
/* Support for different sizes of target format ints and addresses. |
If the type `long' is at least 64 bits, BFD_HOST_64BIT_LONG will be |
set to 1 above. Otherwise, if gcc is being used, this code will |
use gcc's "long long" type. Otherwise, BFD_HOST_64_BIT must be |
defined above. */ |
|
#ifndef BFD_HOST_64_BIT |
# if BFD_HOST_64BIT_LONG |
# define BFD_HOST_64_BIT long |
# define BFD_HOST_U_64_BIT unsigned long |
# else |
# ifdef __GNUC__ |
# if __GNUC__ >= 2 |
# define BFD_HOST_64_BIT long long |
# define BFD_HOST_U_64_BIT unsigned long long |
# endif /* __GNUC__ >= 2 */ |
# endif /* ! defined (__GNUC__) */ |
# endif /* ! BFD_HOST_64BIT_LONG */ |
#endif /* ! defined (BFD_HOST_64_BIT) */ |
|
#ifdef BFD64 |
|
#ifndef BFD_HOST_64_BIT |
#error No 64 bit integer type available |
#endif /* ! defined (BFD_HOST_64_BIT) */ |
|
typedef BFD_HOST_U_64_BIT bfd_vma; |
typedef BFD_HOST_64_BIT bfd_signed_vma; |
typedef BFD_HOST_U_64_BIT bfd_size_type; |
typedef BFD_HOST_U_64_BIT symvalue; |
|
#ifndef fprintf_vma |
#if BFD_HOST_64BIT_LONG |
#define sprintf_vma(s,x) sprintf (s, "%016lx", x) |
#define fprintf_vma(f,x) fprintf (f, "%016lx", x) |
#else |
#define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff))) |
#define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff)) |
#define fprintf_vma(s,x) \ |
fprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x)) |
#define sprintf_vma(s,x) \ |
sprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x)) |
#endif |
#endif |
|
#else /* not BFD64 */ |
|
/* Represent a target address. Also used as a generic unsigned type |
which is guaranteed to be big enough to hold any arithmetic types |
we need to deal with. */ |
typedef unsigned long bfd_vma; |
|
/* A generic signed type which is guaranteed to be big enough to hold any |
arithmetic types we need to deal with. Can be assumed to be compatible |
with bfd_vma in the same way that signed and unsigned ints are compatible |
(as parameters, in assignment, etc). */ |
typedef long bfd_signed_vma; |
|
typedef unsigned long symvalue; |
typedef unsigned long bfd_size_type; |
|
/* Print a bfd_vma x on stream s. */ |
#define fprintf_vma(s,x) fprintf (s, "%08lx", x) |
#define sprintf_vma(s,x) sprintf (s, "%08lx", x) |
|
#endif /* not BFD64 */ |
|
#define printf_vma(x) fprintf_vma(stdout,x) |
|
typedef unsigned int flagword; /* 32 bits of flags */ |
typedef unsigned char bfd_byte; |
|
/** File formats */ |
|
typedef enum bfd_format { |
bfd_unknown = 0, /* file format is unknown */ |
bfd_object, /* linker/assember/compiler output */ |
bfd_archive, /* object archive file */ |
bfd_core, /* core dump */ |
bfd_type_end} /* marks the end; don't use it! */ |
bfd_format; |
|
/* Values that may appear in the flags field of a BFD. These also |
appear in the object_flags field of the bfd_target structure, where |
they indicate the set of flags used by that backend (not all flags |
are meaningful for all object file formats) (FIXME: at the moment, |
the object_flags values have mostly just been copied from backend |
to another, and are not necessarily correct). */ |
|
/* No flags. */ |
#define BFD_NO_FLAGS 0x00 |
|
/* BFD contains relocation entries. */ |
#define HAS_RELOC 0x01 |
|
/* BFD is directly executable. */ |
#define EXEC_P 0x02 |
|
/* BFD has line number information (basically used for F_LNNO in a |
COFF header). */ |
#define HAS_LINENO 0x04 |
|
/* BFD has debugging information. */ |
#define HAS_DEBUG 0x08 |
|
/* BFD has symbols. */ |
#define HAS_SYMS 0x10 |
|
/* BFD has local symbols (basically used for F_LSYMS in a COFF |
header). */ |
#define HAS_LOCALS 0x20 |
|
/* BFD is a dynamic object. */ |
#define DYNAMIC 0x40 |
|
/* Text section is write protected (if D_PAGED is not set, this is |
like an a.out NMAGIC file) (the linker sets this by default, but |
clears it for -r or -N). */ |
#define WP_TEXT 0x80 |
|
/* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the |
linker sets this by default, but clears it for -r or -n or -N). */ |
#define D_PAGED 0x100 |
|
/* BFD is relaxable (this means that bfd_relax_section may be able to |
do something) (sometimes bfd_relax_section can do something even if |
this is not set). */ |
#define BFD_IS_RELAXABLE 0x200 |
|
/* This may be set before writing out a BFD to request using a |
traditional format. For example, this is used to request that when |
writing out an a.out object the symbols not be hashed to eliminate |
duplicates. */ |
#define BFD_TRADITIONAL_FORMAT 0x400 |
|
/* This flag indicates that the BFD contents are actually cached in |
memory. If this is set, iostream points to a bfd_in_memory struct. */ |
#define BFD_IN_MEMORY 0x800 |
|
/* symbols and relocation */ |
|
/* A count of carsyms (canonical archive symbols). */ |
typedef unsigned long symindex; |
|
/* How to perform a relocation. */ |
typedef const struct reloc_howto_struct reloc_howto_type; |
|
#define BFD_NO_MORE_SYMBOLS ((symindex) ~0) |
|
/* General purpose part of a symbol X; |
target specific parts are in libcoff.h, libaout.h, etc. */ |
|
#define bfd_get_section(x) ((x)->section) |
#define bfd_get_output_section(x) ((x)->section->output_section) |
#define bfd_set_section(x,y) ((x)->section) = (y) |
#define bfd_asymbol_base(x) ((x)->section->vma) |
#define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value) |
#define bfd_asymbol_name(x) ((x)->name) |
/*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/ |
#define bfd_asymbol_bfd(x) ((x)->the_bfd) |
#define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour) |
|
/* A canonical archive symbol. */ |
/* This is a type pun with struct ranlib on purpose! */ |
typedef struct carsym { |
char *name; |
file_ptr file_offset; /* look here to find the file */ |
} carsym; /* to make these you call a carsymogen */ |
|
/* Used in generating armaps (archive tables of contents). |
Perhaps just a forward definition would do? */ |
struct orl { /* output ranlib */ |
char **name; /* symbol name */ |
file_ptr pos; /* bfd* or file position */ |
int namidx; /* index into string table */ |
}; |
|
/* Linenumber stuff */ |
typedef struct lineno_cache_entry { |
unsigned int line_number; /* Linenumber from start of function*/ |
union { |
struct symbol_cache_entry *sym; /* Function name */ |
unsigned long offset; /* Offset into section */ |
} u; |
} alent; |
|
/* object and core file sections */ |
|
#define align_power(addr, align) \ |
( ((addr) + ((1<<(align))-1)) & (-1 << (align))) |
|
typedef struct sec *sec_ptr; |
|
#define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0) |
#define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0) |
#define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0) |
#define bfd_section_name(bfd, ptr) ((ptr)->name) |
#define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr)) |
#define bfd_section_vma(bfd, ptr) ((ptr)->vma) |
#define bfd_section_lma(bfd, ptr) ((ptr)->lma) |
#define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power) |
#define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0) |
#define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata) |
|
#define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0) |
|
#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = (boolean)true), true) |
#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true) |
#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true) |
|
typedef struct stat stat_type; |
|
typedef enum bfd_print_symbol |
{ |
bfd_print_symbol_name, |
bfd_print_symbol_more, |
bfd_print_symbol_all |
} bfd_print_symbol_type; |
|
/* Information about a symbol that nm needs. */ |
|
typedef struct _symbol_info |
{ |
symvalue value; |
char type; |
CONST char *name; /* Symbol name. */ |
unsigned char stab_type; /* Stab type. */ |
char stab_other; /* Stab other. */ |
short stab_desc; /* Stab desc. */ |
CONST char *stab_name; /* String for stab type. */ |
} symbol_info; |
|
/* Get the name of a stabs type code. */ |
|
extern const char *bfd_get_stab_name PARAMS ((int)); |
|
/* Hash table routines. There is no way to free up a hash table. */ |
|
/* An element in the hash table. Most uses will actually use a larger |
structure, and an instance of this will be the first field. */ |
|
struct bfd_hash_entry |
{ |
/* Next entry for this hash code. */ |
struct bfd_hash_entry *next; |
/* String being hashed. */ |
const char *string; |
/* Hash code. This is the full hash code, not the index into the |
table. */ |
unsigned long hash; |
}; |
|
/* A hash table. */ |
|
struct bfd_hash_table |
{ |
/* The hash array. */ |
struct bfd_hash_entry **table; |
/* The number of slots in the hash table. */ |
unsigned int size; |
/* A function used to create new elements in the hash table. The |
first entry is itself a pointer to an element. When this |
function is first invoked, this pointer will be NULL. However, |
having the pointer permits a hierarchy of method functions to be |
built each of which calls the function in the superclass. Thus |
each function should be written to allocate a new block of memory |
only if the argument is NULL. */ |
struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *, |
struct bfd_hash_table *, |
const char *)); |
/* An objalloc for this hash table. This is a struct objalloc *, |
but we use PTR to avoid requiring the inclusion of objalloc.h. */ |
PTR memory; |
}; |
|
/* Initialize a hash table. */ |
extern boolean bfd_hash_table_init |
PARAMS ((struct bfd_hash_table *, |
struct bfd_hash_entry *(*) (struct bfd_hash_entry *, |
struct bfd_hash_table *, |
const char *))); |
|
/* Initialize a hash table specifying a size. */ |
extern boolean bfd_hash_table_init_n |
PARAMS ((struct bfd_hash_table *, |
struct bfd_hash_entry *(*) (struct bfd_hash_entry *, |
struct bfd_hash_table *, |
const char *), |
unsigned int size)); |
|
/* Free up a hash table. */ |
extern void bfd_hash_table_free PARAMS ((struct bfd_hash_table *)); |
|
/* Look up a string in a hash table. If CREATE is true, a new entry |
will be created for this string if one does not already exist. The |
COPY argument must be true if this routine should copy the string |
into newly allocated memory when adding an entry. */ |
extern struct bfd_hash_entry *bfd_hash_lookup |
PARAMS ((struct bfd_hash_table *, const char *, boolean create, |
boolean copy)); |
|
/* Replace an entry in a hash table. */ |
extern void bfd_hash_replace |
PARAMS ((struct bfd_hash_table *, struct bfd_hash_entry *old, |
struct bfd_hash_entry *nw)); |
|
/* Base method for creating a hash table entry. */ |
extern struct bfd_hash_entry *bfd_hash_newfunc |
PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *, |
const char *)); |
|
/* Grab some space for a hash table entry. */ |
extern PTR bfd_hash_allocate PARAMS ((struct bfd_hash_table *, |
unsigned int)); |
|
/* Traverse a hash table in a random order, calling a function on each |
element. If the function returns false, the traversal stops. The |
INFO argument is passed to the function. */ |
extern void bfd_hash_traverse PARAMS ((struct bfd_hash_table *, |
boolean (*) (struct bfd_hash_entry *, |
PTR), |
PTR info)); |
|
/* Semi-portable string concatenation in cpp. |
The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors. |
The problem is, "32_" is not a valid preprocessing token, and we don't |
want extra underscores (e.g., "nlm_32_"). The XCAT2 macro will cause the |
inner CAT macros to be evaluated first, producing still-valid pp-tokens. |
Then the final concatenation can be done. (Sigh.) */ |
#ifndef CAT |
#ifdef SABER |
#define CAT(a,b) a##b |
#define CAT3(a,b,c) a##b##c |
#define CAT4(a,b,c,d) a##b##c##d |
#else |
#if defined(__STDC__) || defined(ALMOST_STDC) |
#define CAT(a,b) a##b |
#define CAT3(a,b,c) a##b##c |
#define XCAT2(a,b) CAT(a,b) |
#define CAT4(a,b,c,d) XCAT2(CAT(a,b),CAT(c,d)) |
#else |
#define CAT(a,b) a/**/b |
#define CAT3(a,b,c) a/**/b/**/c |
#define CAT4(a,b,c,d) a/**/b/**/c/**/d |
#endif |
#endif |
#endif |
|
#define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table |
|
/* User program access to BFD facilities */ |
|
/* Direct I/O routines, for programs which know more about the object |
file than BFD does. Use higher level routines if possible. */ |
|
extern bfd_size_type bfd_read |
PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd)); |
extern bfd_size_type bfd_write |
PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd)); |
extern int bfd_seek PARAMS ((bfd *abfd, file_ptr fp, int direction)); |
extern long bfd_tell PARAMS ((bfd *abfd)); |
extern int bfd_flush PARAMS ((bfd *abfd)); |
extern int bfd_stat PARAMS ((bfd *abfd, struct stat *)); |
|
/* Cast from const char * to char * so that caller can assign to |
a char * without a warning. */ |
#define bfd_get_filename(abfd) ((char *) (abfd)->filename) |
#define bfd_get_cacheable(abfd) ((abfd)->cacheable) |
#define bfd_get_format(abfd) ((abfd)->format) |
#define bfd_get_target(abfd) ((abfd)->xvec->name) |
#define bfd_get_flavour(abfd) ((abfd)->xvec->flavour) |
#define bfd_family_coff(abfd) \ |
(bfd_get_flavour (abfd) == bfd_target_coff_flavour || \ |
bfd_get_flavour (abfd) == bfd_target_xcoff_flavour) |
#define bfd_big_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_BIG) |
#define bfd_little_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_LITTLE) |
#define bfd_header_big_endian(abfd) \ |
((abfd)->xvec->header_byteorder == BFD_ENDIAN_BIG) |
#define bfd_header_little_endian(abfd) \ |
((abfd)->xvec->header_byteorder == BFD_ENDIAN_LITTLE) |
#define bfd_get_file_flags(abfd) ((abfd)->flags) |
#define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags) |
#define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags) |
#define bfd_my_archive(abfd) ((abfd)->my_archive) |
#define bfd_has_map(abfd) ((abfd)->has_armap) |
|
#define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types) |
#define bfd_usrdata(abfd) ((abfd)->usrdata) |
|
#define bfd_get_start_address(abfd) ((abfd)->start_address) |
#define bfd_get_symcount(abfd) ((abfd)->symcount) |
#define bfd_get_outsymbols(abfd) ((abfd)->outsymbols) |
#define bfd_count_sections(abfd) ((abfd)->section_count) |
|
#define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char) |
|
#define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean) (bool)), true) |
|
extern boolean bfd_cache_close PARAMS ((bfd *abfd)); |
/* NB: This declaration should match the autogenerated one in libbfd.h. */ |
|
extern boolean bfd_record_phdr |
PARAMS ((bfd *, unsigned long, boolean, flagword, boolean, bfd_vma, |
boolean, boolean, unsigned int, struct sec **)); |
|
/* Byte swapping routines. */ |
|
bfd_vma bfd_getb64 PARAMS ((const unsigned char *)); |
bfd_vma bfd_getl64 PARAMS ((const unsigned char *)); |
bfd_signed_vma bfd_getb_signed_64 PARAMS ((const unsigned char *)); |
bfd_signed_vma bfd_getl_signed_64 PARAMS ((const unsigned char *)); |
bfd_vma bfd_getb32 PARAMS ((const unsigned char *)); |
bfd_vma bfd_getl32 PARAMS ((const unsigned char *)); |
bfd_signed_vma bfd_getb_signed_32 PARAMS ((const unsigned char *)); |
bfd_signed_vma bfd_getl_signed_32 PARAMS ((const unsigned char *)); |
bfd_vma bfd_getb16 PARAMS ((const unsigned char *)); |
bfd_vma bfd_getl16 PARAMS ((const unsigned char *)); |
bfd_signed_vma bfd_getb_signed_16 PARAMS ((const unsigned char *)); |
bfd_signed_vma bfd_getl_signed_16 PARAMS ((const unsigned char *)); |
void bfd_putb64 PARAMS ((bfd_vma, unsigned char *)); |
void bfd_putl64 PARAMS ((bfd_vma, unsigned char *)); |
void bfd_putb32 PARAMS ((bfd_vma, unsigned char *)); |
void bfd_putl32 PARAMS ((bfd_vma, unsigned char *)); |
void bfd_putb16 PARAMS ((bfd_vma, unsigned char *)); |
void bfd_putl16 PARAMS ((bfd_vma, unsigned char *)); |
|
/* Byte swapping routines which take size and endiannes as arguments. */ |
|
bfd_vma bfd_get_bits PARAMS ((bfd_byte *, int, boolean)); |
void bfd_put_bits PARAMS ((bfd_vma, bfd_byte *, int, boolean)); |
|
/* Externally visible ECOFF routines. */ |
|
#if defined(__STDC__) || defined(ALMOST_STDC) |
struct ecoff_debug_info; |
struct ecoff_debug_swap; |
struct ecoff_extr; |
struct symbol_cache_entry; |
struct bfd_link_info; |
struct bfd_link_hash_entry; |
struct bfd_elf_version_tree; |
#endif |
extern bfd_vma bfd_ecoff_get_gp_value PARAMS ((bfd * abfd)); |
extern boolean bfd_ecoff_set_gp_value PARAMS ((bfd *abfd, bfd_vma gp_value)); |
extern boolean bfd_ecoff_set_regmasks |
PARAMS ((bfd *abfd, unsigned long gprmask, unsigned long fprmask, |
unsigned long *cprmask)); |
extern PTR bfd_ecoff_debug_init |
PARAMS ((bfd *output_bfd, struct ecoff_debug_info *output_debug, |
const struct ecoff_debug_swap *output_swap, |
struct bfd_link_info *)); |
extern void bfd_ecoff_debug_free |
PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug, |
const struct ecoff_debug_swap *output_swap, |
struct bfd_link_info *)); |
extern boolean bfd_ecoff_debug_accumulate |
PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug, |
const struct ecoff_debug_swap *output_swap, |
bfd *input_bfd, struct ecoff_debug_info *input_debug, |
const struct ecoff_debug_swap *input_swap, |
struct bfd_link_info *)); |
extern boolean bfd_ecoff_debug_accumulate_other |
PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug, |
const struct ecoff_debug_swap *output_swap, bfd *input_bfd, |
struct bfd_link_info *)); |
extern boolean bfd_ecoff_debug_externals |
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug, |
const struct ecoff_debug_swap *swap, |
boolean relocateable, |
boolean (*get_extr) (struct symbol_cache_entry *, |
struct ecoff_extr *), |
void (*set_index) (struct symbol_cache_entry *, |
bfd_size_type))); |
extern boolean bfd_ecoff_debug_one_external |
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug, |
const struct ecoff_debug_swap *swap, |
const char *name, struct ecoff_extr *esym)); |
extern bfd_size_type bfd_ecoff_debug_size |
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug, |
const struct ecoff_debug_swap *swap)); |
extern boolean bfd_ecoff_write_debug |
PARAMS ((bfd *abfd, struct ecoff_debug_info *debug, |
const struct ecoff_debug_swap *swap, file_ptr where)); |
extern boolean bfd_ecoff_write_accumulated_debug |
PARAMS ((PTR handle, bfd *abfd, struct ecoff_debug_info *debug, |
const struct ecoff_debug_swap *swap, |
struct bfd_link_info *info, file_ptr where)); |
extern boolean bfd_mips_ecoff_create_embedded_relocs |
PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *, |
char **)); |
|
/* Externally visible ELF routines. */ |
|
struct bfd_link_needed_list |
{ |
struct bfd_link_needed_list *next; |
bfd *by; |
const char *name; |
}; |
|
extern boolean bfd_elf32_record_link_assignment |
PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean)); |
extern boolean bfd_elf64_record_link_assignment |
PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean)); |
extern struct bfd_link_needed_list *bfd_elf_get_needed_list |
PARAMS ((bfd *, struct bfd_link_info *)); |
extern boolean bfd_elf_get_bfd_needed_list |
PARAMS ((bfd *, struct bfd_link_needed_list **)); |
extern boolean bfd_elf32_size_dynamic_sections |
PARAMS ((bfd *, const char *, const char *, boolean, const char *, |
const char * const *, struct bfd_link_info *, struct sec **, |
struct bfd_elf_version_tree *)); |
extern boolean bfd_elf64_size_dynamic_sections |
PARAMS ((bfd *, const char *, const char *, boolean, const char *, |
const char * const *, struct bfd_link_info *, struct sec **, |
struct bfd_elf_version_tree *)); |
extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *)); |
extern void bfd_elf_set_dt_needed_soname PARAMS ((bfd *, const char *)); |
extern const char *bfd_elf_get_dt_soname PARAMS ((bfd *)); |
extern struct bfd_link_needed_list *bfd_elf_get_runpath_list |
PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* Return an upper bound on the number of bytes required to store a |
copy of ABFD's program header table entries. Return -1 if an error |
occurs; bfd_get_error will return an appropriate code. */ |
extern long bfd_get_elf_phdr_upper_bound PARAMS ((bfd *abfd)); |
|
/* Copy ABFD's program header table entries to *PHDRS. The entries |
will be stored as an array of Elf_Internal_Phdr structures, as |
defined in include/elf/internal.h. To find out how large the |
buffer needs to be, call bfd_get_elf_phdr_upper_bound. |
|
Return the number of program header table entries read, or -1 if an |
error occurs; bfd_get_error will return an appropriate code. */ |
extern int bfd_get_elf_phdrs PARAMS ((bfd *abfd, void *phdrs)); |
|
/* Return the arch_size field of an elf bfd, or -1 if not elf. */ |
extern int bfd_get_arch_size PARAMS ((bfd *)); |
|
/* Return true if address "naturally" sign extends, or -1 if not elf. */ |
extern int bfd_get_sign_extend_vma PARAMS ((bfd *)); |
|
extern boolean bfd_m68k_elf32_create_embedded_relocs |
PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *, |
char **)); |
|
/* SunOS shared library support routines for the linker. */ |
|
extern struct bfd_link_needed_list *bfd_sunos_get_needed_list |
PARAMS ((bfd *, struct bfd_link_info *)); |
extern boolean bfd_sunos_record_link_assignment |
PARAMS ((bfd *, struct bfd_link_info *, const char *)); |
extern boolean bfd_sunos_size_dynamic_sections |
PARAMS ((bfd *, struct bfd_link_info *, struct sec **, struct sec **, |
struct sec **)); |
|
/* Linux shared library support routines for the linker. */ |
|
extern boolean bfd_i386linux_size_dynamic_sections |
PARAMS ((bfd *, struct bfd_link_info *)); |
extern boolean bfd_m68klinux_size_dynamic_sections |
PARAMS ((bfd *, struct bfd_link_info *)); |
extern boolean bfd_sparclinux_size_dynamic_sections |
PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* mmap hacks */ |
|
struct _bfd_window_internal; |
typedef struct _bfd_window_internal bfd_window_internal; |
|
typedef struct _bfd_window { |
/* What the user asked for. */ |
PTR data; |
bfd_size_type size; |
/* The actual window used by BFD. Small user-requested read-only |
regions sharing a page may share a single window into the object |
file. Read-write versions shouldn't until I've fixed things to |
keep track of which portions have been claimed by the |
application; don't want to give the same region back when the |
application wants two writable copies! */ |
struct _bfd_window_internal *i; |
} bfd_window; |
|
extern void bfd_init_window PARAMS ((bfd_window *)); |
extern void bfd_free_window PARAMS ((bfd_window *)); |
extern boolean bfd_get_file_window |
PARAMS ((bfd *, file_ptr, bfd_size_type, bfd_window *, boolean)); |
|
/* XCOFF support routines for the linker. */ |
|
extern boolean bfd_xcoff_link_record_set |
PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *, |
bfd_size_type)); |
extern boolean bfd_xcoff_import_symbol |
PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *, |
bfd_vma, const char *, const char *, const char *)); |
extern boolean bfd_xcoff_export_symbol |
PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *, |
boolean)); |
extern boolean bfd_xcoff_link_count_reloc |
PARAMS ((bfd *, struct bfd_link_info *, const char *)); |
extern boolean bfd_xcoff_record_link_assignment |
PARAMS ((bfd *, struct bfd_link_info *, const char *)); |
extern boolean bfd_xcoff_size_dynamic_sections |
PARAMS ((bfd *, struct bfd_link_info *, const char *, const char *, |
unsigned long, unsigned long, unsigned long, boolean, |
int, boolean, boolean, struct sec **)); |
|
/* Externally visible COFF routines. */ |
|
#if defined(__STDC__) || defined(ALMOST_STDC) |
struct internal_syment; |
union internal_auxent; |
#endif |
|
extern boolean bfd_coff_get_syment |
PARAMS ((bfd *, struct symbol_cache_entry *, struct internal_syment *)); |
|
extern boolean bfd_coff_get_auxent |
PARAMS ((bfd *, struct symbol_cache_entry *, int, union internal_auxent *)); |
|
extern boolean bfd_coff_set_symbol_class |
PARAMS ((bfd *, struct symbol_cache_entry *, unsigned int)); |
|
extern boolean bfd_m68k_coff_create_embedded_relocs |
PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *, |
char **)); |
|
/* ARM Interworking support. Called from linker. */ |
extern boolean bfd_arm_allocate_interworking_sections |
PARAMS ((struct bfd_link_info *)); |
|
extern boolean bfd_arm_process_before_allocation |
PARAMS ((bfd *, struct bfd_link_info *, int)); |
|
extern boolean bfd_arm_get_bfd_for_interworking |
PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* PE ARM Interworking support. Called from linker. */ |
extern boolean bfd_arm_pe_allocate_interworking_sections |
PARAMS ((struct bfd_link_info *)); |
|
extern boolean bfd_arm_pe_process_before_allocation |
PARAMS ((bfd *, struct bfd_link_info *, int)); |
|
extern boolean bfd_arm_pe_get_bfd_for_interworking |
PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* ELF ARM Interworking support. Called from linker. */ |
extern boolean bfd_elf32_arm_allocate_interworking_sections |
PARAMS ((struct bfd_link_info *)); |
|
extern boolean bfd_elf32_arm_process_before_allocation |
PARAMS ((bfd *, struct bfd_link_info *, int)); |
|
extern boolean bfd_elf32_arm_get_bfd_for_interworking |
PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* TI COFF load page support. */ |
extern void bfd_ticoff_set_section_load_page |
PARAMS ((struct sec *, int)); |
|
extern int bfd_ticoff_get_section_load_page |
PARAMS ((struct sec *)); |
|
/* And more from the source. */ |
void |
bfd_init PARAMS ((void)); |
|
bfd * |
bfd_openr PARAMS ((CONST char *filename, CONST char *target)); |
|
bfd * |
bfd_fdopenr PARAMS ((CONST char *filename, CONST char *target, int fd)); |
|
bfd * |
bfd_openstreamr PARAMS ((const char *, const char *, PTR)); |
|
bfd * |
bfd_openw PARAMS ((CONST char *filename, CONST char *target)); |
|
boolean |
bfd_close PARAMS ((bfd *abfd)); |
|
boolean |
bfd_close_all_done PARAMS ((bfd *)); |
|
bfd * |
bfd_create PARAMS ((CONST char *filename, bfd *templ)); |
|
boolean |
bfd_make_writable PARAMS ((bfd *abfd)); |
|
boolean |
bfd_make_readable PARAMS ((bfd *abfd)); |
|
|
/* Byte swapping macros for user section data. */ |
|
#define bfd_put_8(abfd, val, ptr) \ |
((void) (*((unsigned char *) (ptr)) = (unsigned char) (val))) |
#define bfd_put_signed_8 \ |
bfd_put_8 |
#define bfd_get_8(abfd, ptr) \ |
(*(unsigned char *) (ptr)) |
#define bfd_get_signed_8(abfd, ptr) \ |
((*(unsigned char *) (ptr) ^ 0x80) - 0x80) |
|
#define bfd_put_16(abfd, val, ptr) \ |
BFD_SEND(abfd, bfd_putx16, ((val),(ptr))) |
#define bfd_put_signed_16 \ |
bfd_put_16 |
#define bfd_get_16(abfd, ptr) \ |
BFD_SEND(abfd, bfd_getx16, (ptr)) |
#define bfd_get_signed_16(abfd, ptr) \ |
BFD_SEND (abfd, bfd_getx_signed_16, (ptr)) |
|
#define bfd_put_32(abfd, val, ptr) \ |
BFD_SEND(abfd, bfd_putx32, ((val),(ptr))) |
#define bfd_put_signed_32 \ |
bfd_put_32 |
#define bfd_get_32(abfd, ptr) \ |
BFD_SEND(abfd, bfd_getx32, (ptr)) |
#define bfd_get_signed_32(abfd, ptr) \ |
BFD_SEND(abfd, bfd_getx_signed_32, (ptr)) |
|
#define bfd_put_64(abfd, val, ptr) \ |
BFD_SEND(abfd, bfd_putx64, ((val), (ptr))) |
#define bfd_put_signed_64 \ |
bfd_put_64 |
#define bfd_get_64(abfd, ptr) \ |
BFD_SEND(abfd, bfd_getx64, (ptr)) |
#define bfd_get_signed_64(abfd, ptr) \ |
BFD_SEND(abfd, bfd_getx_signed_64, (ptr)) |
|
#define bfd_get(bits, abfd, ptr) \ |
((bits) == 8 ? bfd_get_8 (abfd, ptr) \ |
: (bits) == 16 ? bfd_get_16 (abfd, ptr) \ |
: (bits) == 32 ? bfd_get_32 (abfd, ptr) \ |
: (bits) == 64 ? bfd_get_64 (abfd, ptr) \ |
: (abort (), (bfd_vma) - 1)) |
|
#define bfd_put(bits, abfd, val, ptr) \ |
((bits) == 8 ? bfd_put_8 (abfd, val, ptr) \ |
: (bits) == 16 ? bfd_put_16 (abfd, val, ptr) \ |
: (bits) == 32 ? bfd_put_32 (abfd, val, ptr) \ |
: (bits) == 64 ? bfd_put_64 (abfd, val, ptr) \ |
: (abort (), (void) 0)) |
|
|
/* Byte swapping macros for file header data. */ |
|
#define bfd_h_put_8(abfd, val, ptr) \ |
bfd_put_8 (abfd, val, ptr) |
#define bfd_h_put_signed_8(abfd, val, ptr) \ |
bfd_put_8 (abfd, val, ptr) |
#define bfd_h_get_8(abfd, ptr) \ |
bfd_get_8 (abfd, ptr) |
#define bfd_h_get_signed_8(abfd, ptr) \ |
bfd_get_signed_8 (abfd, ptr) |
|
#define bfd_h_put_16(abfd, val, ptr) \ |
BFD_SEND(abfd, bfd_h_putx16,(val,ptr)) |
#define bfd_h_put_signed_16 \ |
bfd_h_put_16 |
#define bfd_h_get_16(abfd, ptr) \ |
BFD_SEND(abfd, bfd_h_getx16,(ptr)) |
#define bfd_h_get_signed_16(abfd, ptr) \ |
BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr)) |
|
#define bfd_h_put_32(abfd, val, ptr) \ |
BFD_SEND(abfd, bfd_h_putx32,(val,ptr)) |
#define bfd_h_put_signed_32 \ |
bfd_h_put_32 |
#define bfd_h_get_32(abfd, ptr) \ |
BFD_SEND(abfd, bfd_h_getx32,(ptr)) |
#define bfd_h_get_signed_32(abfd, ptr) \ |
BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr)) |
|
#define bfd_h_put_64(abfd, val, ptr) \ |
BFD_SEND(abfd, bfd_h_putx64,(val, ptr)) |
#define bfd_h_put_signed_64 \ |
bfd_h_put_64 |
#define bfd_h_get_64(abfd, ptr) \ |
BFD_SEND(abfd, bfd_h_getx64,(ptr)) |
#define bfd_h_get_signed_64(abfd, ptr) \ |
BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr)) |
|
/* This structure is used for a comdat section, as in PE. A comdat |
section is associated with a particular symbol. When the linker |
sees a comdat section, it keeps only one of the sections with a |
given name and associated with a given symbol. */ |
|
struct bfd_comdat_info |
{ |
/* The name of the symbol associated with a comdat section. */ |
const char *name; |
|
/* The local symbol table index of the symbol associated with a |
comdat section. This is only meaningful to the object file format |
specific code; it is not an index into the list returned by |
bfd_canonicalize_symtab. */ |
long symbol; |
}; |
|
typedef struct sec |
{ |
/* The name of the section; the name isn't a copy, the pointer is |
the same as that passed to bfd_make_section. */ |
|
const char *name; |
|
/* A unique sequence number. */ |
|
int id; |
|
/* Which section is it; 0..nth. */ |
|
int index; |
|
/* The next section in the list belonging to the BFD, or NULL. */ |
|
struct sec *next; |
|
/* The field flags contains attributes of the section. Some |
flags are read in from the object file, and some are |
synthesized from other information. */ |
|
flagword flags; |
|
#define SEC_NO_FLAGS 0x000 |
|
/* Tells the OS to allocate space for this section when loading. |
This is clear for a section containing debug information only. */ |
#define SEC_ALLOC 0x001 |
|
/* Tells the OS to load the section from the file when loading. |
This is clear for a .bss section. */ |
#define SEC_LOAD 0x002 |
|
/* The section contains data still to be relocated, so there is |
some relocation information too. */ |
#define SEC_RELOC 0x004 |
|
#if 0 /* Obsolete ? */ |
#define SEC_BALIGN 0x008 |
#endif |
|
/* A signal to the OS that the section contains read only data. */ |
#define SEC_READONLY 0x010 |
|
/* The section contains code only. */ |
#define SEC_CODE 0x020 |
|
/* The section contains data only. */ |
#define SEC_DATA 0x040 |
|
/* The section will reside in ROM. */ |
#define SEC_ROM 0x080 |
|
/* The section contains constructor information. This section |
type is used by the linker to create lists of constructors and |
destructors used by <<g++>>. When a back end sees a symbol |
which should be used in a constructor list, it creates a new |
section for the type of name (e.g., <<__CTOR_LIST__>>), attaches |
the symbol to it, and builds a relocation. To build the lists |
of constructors, all the linker has to do is catenate all the |
sections called <<__CTOR_LIST__>> and relocate the data |
contained within - exactly the operations it would peform on |
standard data. */ |
#define SEC_CONSTRUCTOR 0x100 |
|
/* The section is a constructor, and should be placed at the |
end of the text, data, or bss section(?). */ |
#define SEC_CONSTRUCTOR_TEXT 0x1100 |
#define SEC_CONSTRUCTOR_DATA 0x2100 |
#define SEC_CONSTRUCTOR_BSS 0x3100 |
|
/* The section has contents - a data section could be |
<<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be |
<<SEC_HAS_CONTENTS>> */ |
#define SEC_HAS_CONTENTS 0x200 |
|
/* An instruction to the linker to not output the section |
even if it has information which would normally be written. */ |
#define SEC_NEVER_LOAD 0x400 |
|
/* The section is a COFF shared library section. This flag is |
only for the linker. If this type of section appears in |
the input file, the linker must copy it to the output file |
without changing the vma or size. FIXME: Although this |
was originally intended to be general, it really is COFF |
specific (and the flag was renamed to indicate this). It |
might be cleaner to have some more general mechanism to |
allow the back end to control what the linker does with |
sections. */ |
#define SEC_COFF_SHARED_LIBRARY 0x800 |
|
/* The section has GOT references. This flag is only for the |
linker, and is currently only used by the elf32-hppa back end. |
It will be set if global offset table references were detected |
in this section, which indicate to the linker that the section |
contains PIC code, and must be handled specially when doing a |
static link. */ |
#define SEC_HAS_GOT_REF 0x4000 |
|
/* The section contains common symbols (symbols may be defined |
multiple times, the value of a symbol is the amount of |
space it requires, and the largest symbol value is the one |
used). Most targets have exactly one of these (which we |
translate to bfd_com_section_ptr), but ECOFF has two. */ |
#define SEC_IS_COMMON 0x8000 |
|
/* The section contains only debugging information. For |
example, this is set for ELF .debug and .stab sections. |
strip tests this flag to see if a section can be |
discarded. */ |
#define SEC_DEBUGGING 0x10000 |
|
/* The contents of this section are held in memory pointed to |
by the contents field. This is checked by bfd_get_section_contents, |
and the data is retrieved from memory if appropriate. */ |
#define SEC_IN_MEMORY 0x20000 |
|
/* The contents of this section are to be excluded by the |
linker for executable and shared objects unless those |
objects are to be further relocated. */ |
#define SEC_EXCLUDE 0x40000 |
|
/* The contents of this section are to be sorted by the |
based on the address specified in the associated symbol |
table. */ |
#define SEC_SORT_ENTRIES 0x80000 |
|
/* When linking, duplicate sections of the same name should be |
discarded, rather than being combined into a single section as |
is usually done. This is similar to how common symbols are |
handled. See SEC_LINK_DUPLICATES below. */ |
#define SEC_LINK_ONCE 0x100000 |
|
/* If SEC_LINK_ONCE is set, this bitfield describes how the linker |
should handle duplicate sections. */ |
#define SEC_LINK_DUPLICATES 0x600000 |
|
/* This value for SEC_LINK_DUPLICATES means that duplicate |
sections with the same name should simply be discarded. */ |
#define SEC_LINK_DUPLICATES_DISCARD 0x0 |
|
/* This value for SEC_LINK_DUPLICATES means that the linker |
should warn if there are any duplicate sections, although |
it should still only link one copy. */ |
#define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000 |
|
/* This value for SEC_LINK_DUPLICATES means that the linker |
should warn if any duplicate sections are a different size. */ |
#define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000 |
|
/* This value for SEC_LINK_DUPLICATES means that the linker |
should warn if any duplicate sections contain different |
contents. */ |
#define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000 |
|
/* This section was created by the linker as part of dynamic |
relocation or other arcane processing. It is skipped when |
going through the first-pass output, trusting that someone |
else up the line will take care of it later. */ |
#define SEC_LINKER_CREATED 0x800000 |
|
/* This section should not be subject to garbage collection. */ |
#define SEC_KEEP 0x1000000 |
|
/* This section contains "short" data, and should be placed |
"near" the GP. */ |
#define SEC_SMALL_DATA 0x2000000 |
|
/* This section contains data which may be shared with other |
executables or shared objects. */ |
#define SEC_SHARED 0x4000000 |
|
/* When a section with this flag is being linked, then if the size of |
the input section is less than a page, it should not cross a page |
boundary. If the size of the input section is one page or more, it |
should be aligned on a page boundary. */ |
#define SEC_BLOCK 0x8000000 |
|
/* Conditionally link this section; do not link if there are no |
references found to any symbol in the section. */ |
#define SEC_CLINK 0x10000000 |
|
/* Attempt to merge identical entities in the section. |
Entity size is given in the entsize field. */ |
#define SEC_MERGE 0x20000000 |
|
/* If given with SEC_MERGE, entities to merge are zero terminated |
strings where entsize specifies character size instead of fixed |
size entries. */ |
#define SEC_STRINGS 0x40000000 |
|
/* End of section flags. */ |
|
/* Some internal packed boolean fields. */ |
|
/* See the vma field. */ |
unsigned int user_set_vma : 1; |
|
/* Whether relocations have been processed. */ |
unsigned int reloc_done : 1; |
|
/* A mark flag used by some of the linker backends. */ |
unsigned int linker_mark : 1; |
|
/* A mark flag used by some linker backends for garbage collection. */ |
unsigned int gc_mark : 1; |
|
/* Used by the ELF code to mark sections which have been allocated to segments. */ |
unsigned int segment_mark : 1; |
|
/* End of internal packed boolean fields. */ |
|
/* The virtual memory address of the section - where it will be |
at run time. The symbols are relocated against this. The |
user_set_vma flag is maintained by bfd; if it's not set, the |
backend can assign addresses (for example, in <<a.out>>, where |
the default address for <<.data>> is dependent on the specific |
target and various flags). */ |
|
bfd_vma vma; |
|
/* The load address of the section - where it would be in a |
rom image; really only used for writing section header |
information. */ |
|
bfd_vma lma; |
|
/* The size of the section in octets, as it will be output. |
Contains a value even if the section has no contents (e.g., the |
size of <<.bss>>). This will be filled in after relocation. */ |
|
bfd_size_type _cooked_size; |
|
/* The original size on disk of the section, in octets. Normally this |
value is the same as the size, but if some relaxing has |
been done, then this value will be bigger. */ |
|
bfd_size_type _raw_size; |
|
/* If this section is going to be output, then this value is the |
offset in *bytes* into the output section of the first byte in the |
input section (byte ==> smallest addressable unit on the |
target). In most cases, if this was going to start at the |
100th octet (8-bit quantity) in the output section, this value |
would be 100. However, if the target byte size is 16 bits |
(bfd_octets_per_byte is "2"), this value would be 50. */ |
|
bfd_vma output_offset; |
|
/* The output section through which to map on output. */ |
|
struct sec *output_section; |
|
/* The alignment requirement of the section, as an exponent of 2 - |
e.g., 3 aligns to 2^3 (or 8). */ |
|
unsigned int alignment_power; |
|
/* If an input section, a pointer to a vector of relocation |
records for the data in this section. */ |
|
struct reloc_cache_entry *relocation; |
|
/* If an output section, a pointer to a vector of pointers to |
relocation records for the data in this section. */ |
|
struct reloc_cache_entry **orelocation; |
|
/* The number of relocation records in one of the above */ |
|
unsigned reloc_count; |
|
/* Information below is back end specific - and not always used |
or updated. */ |
|
/* File position of section data. */ |
|
file_ptr filepos; |
|
/* File position of relocation info. */ |
|
file_ptr rel_filepos; |
|
/* File position of line data. */ |
|
file_ptr line_filepos; |
|
/* Pointer to data for applications. */ |
|
PTR userdata; |
|
/* If the SEC_IN_MEMORY flag is set, this points to the actual |
contents. */ |
unsigned char *contents; |
|
/* Attached line number information. */ |
|
alent *lineno; |
|
/* Number of line number records. */ |
|
unsigned int lineno_count; |
|
/* Entity size for merging purposes. */ |
|
unsigned int entsize; |
|
/* Optional information about a COMDAT entry; NULL if not COMDAT. */ |
|
struct bfd_comdat_info *comdat; |
|
/* Points to the kept section if this section is a link-once section, |
and is discarded. */ |
struct sec *kept_section; |
|
/* When a section is being output, this value changes as more |
linenumbers are written out. */ |
|
file_ptr moving_line_filepos; |
|
/* What the section number is in the target world. */ |
|
int target_index; |
|
PTR used_by_bfd; |
|
/* If this is a constructor section then here is a list of the |
relocations created to relocate items within it. */ |
|
struct relent_chain *constructor_chain; |
|
/* The BFD which owns the section. */ |
|
bfd *owner; |
|
/* A symbol which points at this section only */ |
struct symbol_cache_entry *symbol; |
struct symbol_cache_entry **symbol_ptr_ptr; |
|
struct bfd_link_order *link_order_head; |
struct bfd_link_order *link_order_tail; |
} asection ; |
|
/* These sections are global, and are managed by BFD. The application |
and target back end are not permitted to change the values in |
these sections. New code should use the section_ptr macros rather |
than referring directly to the const sections. The const sections |
may eventually vanish. */ |
#define BFD_ABS_SECTION_NAME "*ABS*" |
#define BFD_UND_SECTION_NAME "*UND*" |
#define BFD_COM_SECTION_NAME "*COM*" |
#define BFD_IND_SECTION_NAME "*IND*" |
|
/* the absolute section */ |
extern const asection bfd_abs_section; |
#define bfd_abs_section_ptr ((asection *) &bfd_abs_section) |
#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr) |
/* Pointer to the undefined section */ |
extern const asection bfd_und_section; |
#define bfd_und_section_ptr ((asection *) &bfd_und_section) |
#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr) |
/* Pointer to the common section */ |
extern const asection bfd_com_section; |
#define bfd_com_section_ptr ((asection *) &bfd_com_section) |
/* Pointer to the indirect section */ |
extern const asection bfd_ind_section; |
#define bfd_ind_section_ptr ((asection *) &bfd_ind_section) |
#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr) |
|
extern const struct symbol_cache_entry * const bfd_abs_symbol; |
extern const struct symbol_cache_entry * const bfd_com_symbol; |
extern const struct symbol_cache_entry * const bfd_und_symbol; |
extern const struct symbol_cache_entry * const bfd_ind_symbol; |
#define bfd_get_section_size_before_reloc(section) \ |
((section)->reloc_done ? (abort (), (bfd_size_type) 1) \ |
: (section)->_raw_size) |
#define bfd_get_section_size_after_reloc(section) \ |
((section)->reloc_done ? (section)->_cooked_size \ |
: (abort (), (bfd_size_type) 1)) |
asection * |
bfd_get_section_by_name PARAMS ((bfd *abfd, const char *name)); |
|
char * |
bfd_get_unique_section_name PARAMS ((bfd *abfd, |
const char *templat, |
int *count)); |
|
asection * |
bfd_make_section_old_way PARAMS ((bfd *abfd, const char *name)); |
|
asection * |
bfd_make_section_anyway PARAMS ((bfd *abfd, const char *name)); |
|
asection * |
bfd_make_section PARAMS ((bfd *, const char *name)); |
|
boolean |
bfd_set_section_flags PARAMS ((bfd *abfd, asection *sec, flagword flags)); |
|
void |
bfd_map_over_sections PARAMS ((bfd *abfd, |
void (*func) (bfd *abfd, |
asection *sect, |
PTR obj), |
PTR obj)); |
|
boolean |
bfd_set_section_size PARAMS ((bfd *abfd, asection *sec, bfd_size_type val)); |
|
boolean |
bfd_set_section_contents PARAMS ((bfd *abfd, |
asection *section, |
PTR data, |
file_ptr offset, |
bfd_size_type count)); |
|
boolean |
bfd_get_section_contents PARAMS ((bfd *abfd, asection *section, PTR location, |
file_ptr offset, bfd_size_type count)); |
|
boolean |
bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec)); |
|
#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \ |
BFD_SEND (obfd, _bfd_copy_private_section_data, \ |
(ibfd, isection, obfd, osection)) |
void |
_bfd_strip_section_from_output PARAMS ((struct bfd_link_info *info, asection *section)); |
|
enum bfd_architecture |
{ |
bfd_arch_unknown, /* File arch not known */ |
bfd_arch_obscure, /* Arch known, not one of these */ |
bfd_arch_m68k, /* Motorola 68xxx */ |
#define bfd_mach_m68000 1 |
#define bfd_mach_m68008 2 |
#define bfd_mach_m68010 3 |
#define bfd_mach_m68020 4 |
#define bfd_mach_m68030 5 |
#define bfd_mach_m68040 6 |
#define bfd_mach_m68060 7 |
#define bfd_mach_cpu32 8 |
#define bfd_mach_mcf5200 9 |
#define bfd_mach_mcf5206e 10 |
#define bfd_mach_mcf5307 11 |
#define bfd_mach_mcf5407 12 |
bfd_arch_vax, /* DEC Vax */ |
bfd_arch_i960, /* Intel 960 */ |
/* The order of the following is important. |
lower number indicates a machine type that |
only accepts a subset of the instructions |
available to machines with higher numbers. |
The exception is the "ca", which is |
incompatible with all other machines except |
"core". */ |
|
#define bfd_mach_i960_core 1 |
#define bfd_mach_i960_ka_sa 2 |
#define bfd_mach_i960_kb_sb 3 |
#define bfd_mach_i960_mc 4 |
#define bfd_mach_i960_xa 5 |
#define bfd_mach_i960_ca 6 |
#define bfd_mach_i960_jx 7 |
#define bfd_mach_i960_hx 8 |
|
bfd_arch_a29k, /* AMD 29000 */ |
bfd_arch_sparc, /* SPARC */ |
#define bfd_mach_sparc 1 |
/* The difference between v8plus and v9 is that v9 is a true 64 bit env. */ |
#define bfd_mach_sparc_sparclet 2 |
#define bfd_mach_sparc_sparclite 3 |
#define bfd_mach_sparc_v8plus 4 |
#define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns */ |
#define bfd_mach_sparc_sparclite_le 6 |
#define bfd_mach_sparc_v9 7 |
#define bfd_mach_sparc_v9a 8 /* with ultrasparc add'ns */ |
#define bfd_mach_sparc_v8plusb 9 /* with cheetah add'ns */ |
#define bfd_mach_sparc_v9b 10 /* with cheetah add'ns */ |
/* Nonzero if MACH has the v9 instruction set. */ |
#define bfd_mach_sparc_v9_p(mach) \ |
((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \ |
&& (mach) != bfd_mach_sparc_sparclite_le) |
bfd_arch_mips, /* MIPS Rxxxx */ |
#define bfd_mach_mips3000 3000 |
#define bfd_mach_mips3900 3900 |
#define bfd_mach_mips4000 4000 |
#define bfd_mach_mips4010 4010 |
#define bfd_mach_mips4100 4100 |
#define bfd_mach_mips4111 4111 |
#define bfd_mach_mips4300 4300 |
#define bfd_mach_mips4400 4400 |
#define bfd_mach_mips4600 4600 |
#define bfd_mach_mips4650 4650 |
#define bfd_mach_mips5000 5000 |
#define bfd_mach_mips6000 6000 |
#define bfd_mach_mips8000 8000 |
#define bfd_mach_mips10000 10000 |
#define bfd_mach_mips16 16 |
#define bfd_mach_mips32 32 |
#define bfd_mach_mips32_4k 3204113 /* 32, 04, octal 'K' */ |
#define bfd_mach_mips5 5 |
#define bfd_mach_mips64 64 |
#define bfd_mach_mips_sb1 12310201 /* octal 'SB', 01 */ |
bfd_arch_i386, /* Intel 386 */ |
#define bfd_mach_i386_i386 0 |
#define bfd_mach_i386_i8086 1 |
#define bfd_mach_i386_i386_intel_syntax 2 |
#define bfd_mach_x86_64 3 |
#define bfd_mach_x86_64_intel_syntax 4 |
bfd_arch_we32k, /* AT&T WE32xxx */ |
bfd_arch_tahoe, /* CCI/Harris Tahoe */ |
bfd_arch_i860, /* Intel 860 */ |
bfd_arch_i370, /* IBM 360/370 Mainframes */ |
bfd_arch_romp, /* IBM ROMP PC/RT */ |
bfd_arch_alliant, /* Alliant */ |
bfd_arch_convex, /* Convex */ |
bfd_arch_m88k, /* Motorola 88xxx */ |
bfd_arch_pyramid, /* Pyramid Technology */ |
bfd_arch_h8300, /* Hitachi H8/300 */ |
#define bfd_mach_h8300 1 |
#define bfd_mach_h8300h 2 |
#define bfd_mach_h8300s 3 |
bfd_arch_pdp11, /* DEC PDP-11 */ |
bfd_arch_powerpc, /* PowerPC */ |
#define bfd_mach_ppc 0 |
#define bfd_mach_ppc_403 403 |
#define bfd_mach_ppc_403gc 4030 |
#define bfd_mach_ppc_505 505 |
#define bfd_mach_ppc_601 601 |
#define bfd_mach_ppc_602 602 |
#define bfd_mach_ppc_603 603 |
#define bfd_mach_ppc_ec603e 6031 |
#define bfd_mach_ppc_604 604 |
#define bfd_mach_ppc_620 620 |
#define bfd_mach_ppc_630 630 |
#define bfd_mach_ppc_750 750 |
#define bfd_mach_ppc_860 860 |
#define bfd_mach_ppc_a35 35 |
#define bfd_mach_ppc_rs64ii 642 |
#define bfd_mach_ppc_rs64iii 643 |
#define bfd_mach_ppc_7400 7400 |
bfd_arch_rs6000, /* IBM RS/6000 */ |
#define bfd_mach_rs6k 0 |
#define bfd_mach_rs6k_rs1 6001 |
#define bfd_mach_rs6k_rsc 6003 |
#define bfd_mach_rs6k_rs2 6002 |
bfd_arch_hppa, /* HP PA RISC */ |
bfd_arch_d10v, /* Mitsubishi D10V */ |
#define bfd_mach_d10v 0 |
#define bfd_mach_d10v_ts2 2 |
#define bfd_mach_d10v_ts3 3 |
bfd_arch_d30v, /* Mitsubishi D30V */ |
bfd_arch_m68hc11, /* Motorola 68HC11 */ |
bfd_arch_m68hc12, /* Motorola 68HC12 */ |
bfd_arch_z8k, /* Zilog Z8000 */ |
#define bfd_mach_z8001 1 |
#define bfd_mach_z8002 2 |
bfd_arch_h8500, /* Hitachi H8/500 */ |
bfd_arch_sh, /* Hitachi SH */ |
#define bfd_mach_sh 0 |
#define bfd_mach_sh2 0x20 |
#define bfd_mach_sh_dsp 0x2d |
#define bfd_mach_sh3 0x30 |
#define bfd_mach_sh3_dsp 0x3d |
#define bfd_mach_sh3e 0x3e |
#define bfd_mach_sh4 0x40 |
bfd_arch_alpha, /* Dec Alpha */ |
#define bfd_mach_alpha_ev4 0x10 |
#define bfd_mach_alpha_ev5 0x20 |
#define bfd_mach_alpha_ev6 0x30 |
bfd_arch_arm, /* Advanced Risc Machines ARM */ |
#define bfd_mach_arm_2 1 |
#define bfd_mach_arm_2a 2 |
#define bfd_mach_arm_3 3 |
#define bfd_mach_arm_3M 4 |
#define bfd_mach_arm_4 5 |
#define bfd_mach_arm_4T 6 |
#define bfd_mach_arm_5 7 |
#define bfd_mach_arm_5T 8 |
#define bfd_mach_arm_5TE 9 |
#define bfd_mach_arm_XScale 10 |
bfd_arch_ns32k, /* National Semiconductors ns32000 */ |
bfd_arch_w65, /* WDC 65816 */ |
bfd_arch_tic30, /* Texas Instruments TMS320C30 */ |
bfd_arch_tic54x, /* Texas Instruments TMS320C54X */ |
bfd_arch_tic80, /* TI TMS320c80 (MVP) */ |
bfd_arch_v850, /* NEC V850 */ |
#define bfd_mach_v850 0 |
#define bfd_mach_v850e 'E' |
#define bfd_mach_v850ea 'A' |
bfd_arch_arc, /* ARC Cores */ |
#define bfd_mach_arc_5 0 |
#define bfd_mach_arc_6 1 |
#define bfd_mach_arc_7 2 |
#define bfd_mach_arc_8 3 |
bfd_arch_m32r, /* Mitsubishi M32R/D */ |
#define bfd_mach_m32r 0 /* backwards compatibility */ |
#define bfd_mach_m32rx 'x' |
bfd_arch_mn10200, /* Matsushita MN10200 */ |
bfd_arch_mn10300, /* Matsushita MN10300 */ |
#define bfd_mach_mn10300 300 |
#define bfd_mach_am33 330 |
bfd_arch_fr30, |
#define bfd_mach_fr30 0x46523330 |
bfd_arch_mcore, |
bfd_arch_ia64, /* HP/Intel ia64 */ |
#define bfd_mach_ia64_elf64 0 |
#define bfd_mach_ia64_elf32 1 |
bfd_arch_pj, |
bfd_arch_avr, /* Atmel AVR microcontrollers */ |
#define bfd_mach_avr1 1 |
#define bfd_mach_avr2 2 |
#define bfd_mach_avr3 3 |
#define bfd_mach_avr4 4 |
#define bfd_mach_avr5 5 |
bfd_arch_cris, /* Axis CRIS */ |
bfd_arch_s390, /* IBM s390 */ |
#define bfd_mach_s390_esa 0 |
#define bfd_mach_s390_esame 1 |
bfd_arch_openrisc, /* OpenRISC */ |
bfd_arch_last |
}; |
|
typedef struct bfd_arch_info |
{ |
int bits_per_word; |
int bits_per_address; |
int bits_per_byte; |
enum bfd_architecture arch; |
unsigned long mach; |
const char *arch_name; |
const char *printable_name; |
unsigned int section_align_power; |
/* True if this is the default machine for the architecture. */ |
boolean the_default; |
const struct bfd_arch_info * (*compatible) |
PARAMS ((const struct bfd_arch_info *a, |
const struct bfd_arch_info *b)); |
|
boolean (*scan) PARAMS ((const struct bfd_arch_info *, const char *)); |
|
const struct bfd_arch_info *next; |
} bfd_arch_info_type; |
const char * |
bfd_printable_name PARAMS ((bfd *abfd)); |
|
const bfd_arch_info_type * |
bfd_scan_arch PARAMS ((const char *string)); |
|
const char ** |
bfd_arch_list PARAMS ((void)); |
|
const bfd_arch_info_type * |
bfd_arch_get_compatible PARAMS (( |
const bfd *abfd, |
const bfd *bbfd)); |
|
void |
bfd_set_arch_info PARAMS ((bfd *abfd, const bfd_arch_info_type *arg)); |
|
enum bfd_architecture |
bfd_get_arch PARAMS ((bfd *abfd)); |
|
unsigned long |
bfd_get_mach PARAMS ((bfd *abfd)); |
|
unsigned int |
bfd_arch_bits_per_byte PARAMS ((bfd *abfd)); |
|
unsigned int |
bfd_arch_bits_per_address PARAMS ((bfd *abfd)); |
|
const bfd_arch_info_type * |
bfd_get_arch_info PARAMS ((bfd *abfd)); |
|
const bfd_arch_info_type * |
bfd_lookup_arch PARAMS ((enum bfd_architecture |
arch, |
unsigned long machine)); |
|
const char * |
bfd_printable_arch_mach PARAMS ((enum bfd_architecture arch, unsigned long machine)); |
|
unsigned int |
bfd_octets_per_byte PARAMS ((bfd *abfd)); |
|
unsigned int |
bfd_arch_mach_octets_per_byte PARAMS ((enum bfd_architecture arch, |
unsigned long machine)); |
|
typedef enum bfd_reloc_status |
{ |
/* No errors detected */ |
bfd_reloc_ok, |
|
/* The relocation was performed, but there was an overflow. */ |
bfd_reloc_overflow, |
|
/* The address to relocate was not within the section supplied. */ |
bfd_reloc_outofrange, |
|
/* Used by special functions */ |
bfd_reloc_continue, |
|
/* Unsupported relocation size requested. */ |
bfd_reloc_notsupported, |
|
/* Unused */ |
bfd_reloc_other, |
|
/* The symbol to relocate against was undefined. */ |
bfd_reloc_undefined, |
|
/* The relocation was performed, but may not be ok - presently |
generated only when linking i960 coff files with i960 b.out |
symbols. If this type is returned, the error_message argument |
to bfd_perform_relocation will be set. */ |
bfd_reloc_dangerous |
} |
bfd_reloc_status_type; |
|
|
typedef struct reloc_cache_entry |
{ |
/* A pointer into the canonical table of pointers */ |
struct symbol_cache_entry **sym_ptr_ptr; |
|
/* offset in section */ |
bfd_size_type address; |
|
/* addend for relocation value */ |
bfd_vma addend; |
|
/* Pointer to how to perform the required relocation */ |
reloc_howto_type *howto; |
|
} arelent; |
enum complain_overflow |
{ |
/* Do not complain on overflow. */ |
complain_overflow_dont, |
|
/* Complain if the bitfield overflows, whether it is considered |
as signed or unsigned. */ |
complain_overflow_bitfield, |
|
/* Complain if the value overflows when considered as signed |
number. */ |
complain_overflow_signed, |
|
/* Complain if the value overflows when considered as an |
unsigned number. */ |
complain_overflow_unsigned |
}; |
|
struct reloc_howto_struct |
{ |
/* The type field has mainly a documentary use - the back end can |
do what it wants with it, though normally the back end's |
external idea of what a reloc number is stored |
in this field. For example, a PC relative word relocation |
in a coff environment has the type 023 - because that's |
what the outside world calls a R_PCRWORD reloc. */ |
unsigned int type; |
|
/* The value the final relocation is shifted right by. This drops |
unwanted data from the relocation. */ |
unsigned int rightshift; |
|
/* The size of the item to be relocated. This is *not* a |
power-of-two measure. To get the number of bytes operated |
on by a type of relocation, use bfd_get_reloc_size. */ |
int size; |
|
/* The number of bits in the item to be relocated. This is used |
when doing overflow checking. */ |
unsigned int bitsize; |
|
/* Notes that the relocation is relative to the location in the |
data section of the addend. The relocation function will |
subtract from the relocation value the address of the location |
being relocated. */ |
boolean pc_relative; |
|
/* The bit position of the reloc value in the destination. |
The relocated value is left shifted by this amount. */ |
unsigned int bitpos; |
|
/* What type of overflow error should be checked for when |
relocating. */ |
enum complain_overflow complain_on_overflow; |
|
/* If this field is non null, then the supplied function is |
called rather than the normal function. This allows really |
strange relocation methods to be accomodated (e.g., i960 callj |
instructions). */ |
bfd_reloc_status_type (*special_function) |
PARAMS ((bfd *abfd, |
arelent *reloc_entry, |
struct symbol_cache_entry *symbol, |
PTR data, |
asection *input_section, |
bfd *output_bfd, |
char **error_message)); |
|
/* The textual name of the relocation type. */ |
char *name; |
|
/* Some formats record a relocation addend in the section contents |
rather than with the relocation. For ELF formats this is the |
distinction between USE_REL and USE_RELA (though the code checks |
for USE_REL == 1/0). The value of this field is TRUE if the |
addend is recorded with the section contents; when performing a |
partial link (ld -r) the section contents (the data) will be |
modified. The value of this field is FALSE if addends are |
recorded with the relocation (in arelent.addend); when performing |
a partial link the relocation will be modified. |
All relocations for all ELF USE_RELA targets should set this field |
to FALSE (values of TRUE should be looked on with suspicion). |
However, the converse is not true: not all relocations of all ELF |
USE_REL targets set this field to TRUE. Why this is so is peculiar |
to each particular target. For relocs that aren't used in partial |
links (e.g. GOT stuff) it doesn't matter what this is set to. */ |
boolean partial_inplace; |
|
/* The src_mask selects which parts of the read in data |
are to be used in the relocation sum. E.g., if this was an 8 bit |
byte of data which we read and relocated, this would be |
0x000000ff. When we have relocs which have an addend, such as |
sun4 extended relocs, the value in the offset part of a |
relocating field is garbage so we never use it. In this case |
the mask would be 0x00000000. */ |
bfd_vma src_mask; |
|
/* The dst_mask selects which parts of the instruction are replaced |
into the instruction. In most cases src_mask == dst_mask, |
except in the above special case, where dst_mask would be |
0x000000ff, and src_mask would be 0x00000000. */ |
bfd_vma dst_mask; |
|
/* When some formats create PC relative instructions, they leave |
the value of the pc of the place being relocated in the offset |
slot of the instruction, so that a PC relative relocation can |
be made just by adding in an ordinary offset (e.g., sun3 a.out). |
Some formats leave the displacement part of an instruction |
empty (e.g., m88k bcs); this flag signals the fact.*/ |
boolean pcrel_offset; |
|
}; |
#define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \ |
{(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC} |
#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN) |
|
#define EMPTY_HOWTO(C) \ |
HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false) |
|
#define HOWTO_PREPARE(relocation, symbol) \ |
{ \ |
if (symbol != (asymbol *)NULL) { \ |
if (bfd_is_com_section (symbol->section)) { \ |
relocation = 0; \ |
} \ |
else { \ |
relocation = symbol->value; \ |
} \ |
} \ |
} |
unsigned int |
bfd_get_reloc_size PARAMS ((reloc_howto_type *)); |
|
typedef struct relent_chain { |
arelent relent; |
struct relent_chain *next; |
} arelent_chain; |
bfd_reloc_status_type |
bfd_check_overflow PARAMS ((enum complain_overflow how, |
unsigned int bitsize, |
unsigned int rightshift, |
unsigned int addrsize, |
bfd_vma relocation)); |
|
bfd_reloc_status_type |
bfd_perform_relocation PARAMS ((bfd *abfd, |
arelent *reloc_entry, |
PTR data, |
asection *input_section, |
bfd *output_bfd, |
char **error_message)); |
|
bfd_reloc_status_type |
bfd_install_relocation PARAMS ((bfd *abfd, |
arelent *reloc_entry, |
PTR data, bfd_vma data_start, |
asection *input_section, |
char **error_message)); |
|
enum bfd_reloc_code_real { |
_dummy_first_bfd_reloc_code_real, |
|
|
/* Basic absolute relocations of N bits. */ |
BFD_RELOC_64, |
BFD_RELOC_32, |
BFD_RELOC_26, |
BFD_RELOC_24, |
BFD_RELOC_16, |
BFD_RELOC_14, |
BFD_RELOC_8, |
|
/* PC-relative relocations. Sometimes these are relative to the address |
of the relocation itself; sometimes they are relative to the start of |
the section containing the relocation. It depends on the specific target. |
|
The 24-bit relocation is used in some Intel 960 configurations. */ |
BFD_RELOC_64_PCREL, |
BFD_RELOC_32_PCREL, |
BFD_RELOC_24_PCREL, |
BFD_RELOC_16_PCREL, |
BFD_RELOC_12_PCREL, |
BFD_RELOC_8_PCREL, |
|
/* For ELF. */ |
BFD_RELOC_32_GOT_PCREL, |
BFD_RELOC_16_GOT_PCREL, |
BFD_RELOC_8_GOT_PCREL, |
BFD_RELOC_32_GOTOFF, |
BFD_RELOC_16_GOTOFF, |
BFD_RELOC_LO16_GOTOFF, |
BFD_RELOC_HI16_GOTOFF, |
BFD_RELOC_HI16_S_GOTOFF, |
BFD_RELOC_8_GOTOFF, |
BFD_RELOC_32_PLT_PCREL, |
BFD_RELOC_24_PLT_PCREL, |
BFD_RELOC_16_PLT_PCREL, |
BFD_RELOC_8_PLT_PCREL, |
BFD_RELOC_32_PLTOFF, |
BFD_RELOC_16_PLTOFF, |
BFD_RELOC_LO16_PLTOFF, |
BFD_RELOC_HI16_PLTOFF, |
BFD_RELOC_HI16_S_PLTOFF, |
BFD_RELOC_8_PLTOFF, |
|
/* Relocations used by 68K ELF. */ |
BFD_RELOC_68K_GLOB_DAT, |
BFD_RELOC_68K_JMP_SLOT, |
BFD_RELOC_68K_RELATIVE, |
|
/* Linkage-table relative. */ |
BFD_RELOC_32_BASEREL, |
BFD_RELOC_16_BASEREL, |
BFD_RELOC_LO16_BASEREL, |
BFD_RELOC_HI16_BASEREL, |
BFD_RELOC_HI16_S_BASEREL, |
BFD_RELOC_8_BASEREL, |
BFD_RELOC_RVA, |
|
/* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */ |
BFD_RELOC_8_FFnn, |
|
/* These PC-relative relocations are stored as word displacements -- |
i.e., byte displacements shifted right two bits. The 30-bit word |
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the |
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The |
signed 16-bit displacement is used on the MIPS, and the 23-bit |
displacement is used on the Alpha. */ |
BFD_RELOC_32_PCREL_S2, |
BFD_RELOC_16_PCREL_S2, |
BFD_RELOC_23_PCREL_S2, |
|
/* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of |
the target word. These are used on the SPARC. */ |
BFD_RELOC_HI22, |
BFD_RELOC_LO10, |
|
/* For systems that allocate a Global Pointer register, these are |
displacements off that register. These relocation types are |
handled specially, because the value the register will have is |
decided relatively late. */ |
BFD_RELOC_GPREL16, |
BFD_RELOC_GPREL32, |
|
/* Reloc types used for i960/b.out. */ |
BFD_RELOC_I960_CALLJ, |
|
/* SPARC ELF relocations. There is probably some overlap with other |
relocation types already defined. */ |
BFD_RELOC_NONE, |
BFD_RELOC_SPARC_WDISP22, |
BFD_RELOC_SPARC22, |
BFD_RELOC_SPARC13, |
BFD_RELOC_SPARC_GOT10, |
BFD_RELOC_SPARC_GOT13, |
BFD_RELOC_SPARC_GOT22, |
BFD_RELOC_SPARC_PC10, |
BFD_RELOC_SPARC_PC22, |
BFD_RELOC_SPARC_WPLT30, |
BFD_RELOC_SPARC_COPY, |
BFD_RELOC_SPARC_GLOB_DAT, |
BFD_RELOC_SPARC_JMP_SLOT, |
BFD_RELOC_SPARC_RELATIVE, |
BFD_RELOC_SPARC_UA32, |
|
/* I think these are specific to SPARC a.out (e.g., Sun 4). */ |
BFD_RELOC_SPARC_BASE13, |
BFD_RELOC_SPARC_BASE22, |
|
/* SPARC64 relocations */ |
#define BFD_RELOC_SPARC_64 BFD_RELOC_64 |
BFD_RELOC_SPARC_10, |
BFD_RELOC_SPARC_11, |
BFD_RELOC_SPARC_OLO10, |
BFD_RELOC_SPARC_HH22, |
BFD_RELOC_SPARC_HM10, |
BFD_RELOC_SPARC_LM22, |
BFD_RELOC_SPARC_PC_HH22, |
BFD_RELOC_SPARC_PC_HM10, |
BFD_RELOC_SPARC_PC_LM22, |
BFD_RELOC_SPARC_WDISP16, |
BFD_RELOC_SPARC_WDISP19, |
BFD_RELOC_SPARC_7, |
BFD_RELOC_SPARC_6, |
BFD_RELOC_SPARC_5, |
#define BFD_RELOC_SPARC_DISP64 BFD_RELOC_64_PCREL |
BFD_RELOC_SPARC_PLT64, |
BFD_RELOC_SPARC_HIX22, |
BFD_RELOC_SPARC_LOX10, |
BFD_RELOC_SPARC_H44, |
BFD_RELOC_SPARC_M44, |
BFD_RELOC_SPARC_L44, |
BFD_RELOC_SPARC_REGISTER, |
|
/* SPARC little endian relocation */ |
BFD_RELOC_SPARC_REV32, |
|
/* Alpha ECOFF and ELF relocations. Some of these treat the symbol or |
"addend" in some special way. |
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when |
writing; when reading, it will be the absolute section symbol. The |
addend is the displacement in bytes of the "lda" instruction from |
the "ldah" instruction (which is at the address of this reloc). */ |
BFD_RELOC_ALPHA_GPDISP_HI16, |
|
/* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as |
with GPDISP_HI16 relocs. The addend is ignored when writing the |
relocations out, and is filled in with the file's GP value on |
reading, for convenience. */ |
BFD_RELOC_ALPHA_GPDISP_LO16, |
|
/* The ELF GPDISP relocation is exactly the same as the GPDISP_HI16 |
relocation except that there is no accompanying GPDISP_LO16 |
relocation. */ |
BFD_RELOC_ALPHA_GPDISP, |
|
/* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference; |
the assembler turns it into a LDQ instruction to load the address of |
the symbol, and then fills in a register in the real instruction. |
|
The LITERAL reloc, at the LDQ instruction, refers to the .lita |
section symbol. The addend is ignored when writing, but is filled |
in with the file's GP value on reading, for convenience, as with the |
GPDISP_LO16 reloc. |
|
The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16. |
It should refer to the symbol to be referenced, as with 16_GOTOFF, |
but it generates output not based on the position within the .got |
section, but relative to the GP value chosen for the file during the |
final link stage. |
|
The LITUSE reloc, on the instruction using the loaded address, gives |
information to the linker that it might be able to use to optimize |
away some literal section references. The symbol is ignored (read |
as the absolute section symbol), and the "addend" indicates the type |
of instruction using the register: |
1 - "memory" fmt insn |
2 - byte-manipulation (byte offset reg) |
3 - jsr (target of branch) |
|
The GNU linker currently doesn't do any of this optimizing. */ |
BFD_RELOC_ALPHA_LITERAL, |
BFD_RELOC_ALPHA_ELF_LITERAL, |
BFD_RELOC_ALPHA_LITUSE, |
|
/* The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to |
process the explicit !<reloc>!sequence relocations, and are mapped |
into the normal relocations at the end of processing. */ |
BFD_RELOC_ALPHA_USER_LITERAL, |
BFD_RELOC_ALPHA_USER_LITUSE_BASE, |
BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF, |
BFD_RELOC_ALPHA_USER_LITUSE_JSR, |
BFD_RELOC_ALPHA_USER_GPDISP, |
BFD_RELOC_ALPHA_USER_GPRELHIGH, |
BFD_RELOC_ALPHA_USER_GPRELLOW, |
|
/* The HINT relocation indicates a value that should be filled into the |
"hint" field of a jmp/jsr/ret instruction, for possible branch- |
prediction logic which may be provided on some processors. */ |
BFD_RELOC_ALPHA_HINT, |
|
/* The LINKAGE relocation outputs a linkage pair in the object file, |
which is filled by the linker. */ |
BFD_RELOC_ALPHA_LINKAGE, |
|
/* The CODEADDR relocation outputs a STO_CA in the object file, |
which is filled by the linker. */ |
BFD_RELOC_ALPHA_CODEADDR, |
|
/* Bits 27..2 of the relocation address shifted right 2 bits; |
simple reloc otherwise. */ |
BFD_RELOC_MIPS_JMP, |
|
/* The MIPS16 jump instruction. */ |
BFD_RELOC_MIPS16_JMP, |
|
/* MIPS16 GP relative reloc. */ |
BFD_RELOC_MIPS16_GPREL, |
|
/* High 16 bits of 32-bit value; simple reloc. */ |
BFD_RELOC_HI16, |
|
/* High 16 bits of 32-bit value but the low 16 bits will be sign |
extended and added to form the final result. If the low 16 |
bits form a negative number, we need to add one to the high value |
to compensate for the borrow when the low bits are added. */ |
BFD_RELOC_HI16_S, |
|
/* Low 16 bits. */ |
BFD_RELOC_LO16, |
|
/* Like BFD_RELOC_HI16_S, but PC relative. */ |
BFD_RELOC_PCREL_HI16_S, |
|
/* Like BFD_RELOC_LO16, but PC relative. */ |
BFD_RELOC_PCREL_LO16, |
|
/* Relocation relative to the global pointer. */ |
#define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16 |
|
/* Relocation against a MIPS literal section. */ |
BFD_RELOC_MIPS_LITERAL, |
|
/* MIPS ELF relocations. */ |
BFD_RELOC_MIPS_GOT16, |
BFD_RELOC_MIPS_CALL16, |
#define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32 |
BFD_RELOC_MIPS_GOT_HI16, |
BFD_RELOC_MIPS_GOT_LO16, |
BFD_RELOC_MIPS_CALL_HI16, |
BFD_RELOC_MIPS_CALL_LO16, |
BFD_RELOC_MIPS_SUB, |
BFD_RELOC_MIPS_GOT_PAGE, |
BFD_RELOC_MIPS_GOT_OFST, |
BFD_RELOC_MIPS_GOT_DISP, |
|
|
/* i386/elf relocations */ |
BFD_RELOC_386_GOT32, |
BFD_RELOC_386_PLT32, |
BFD_RELOC_386_COPY, |
BFD_RELOC_386_GLOB_DAT, |
BFD_RELOC_386_JUMP_SLOT, |
BFD_RELOC_386_RELATIVE, |
BFD_RELOC_386_GOTOFF, |
BFD_RELOC_386_GOTPC, |
|
/* x86-64/elf relocations */ |
BFD_RELOC_X86_64_GOT32, |
BFD_RELOC_X86_64_PLT32, |
BFD_RELOC_X86_64_COPY, |
BFD_RELOC_X86_64_GLOB_DAT, |
BFD_RELOC_X86_64_JUMP_SLOT, |
BFD_RELOC_X86_64_RELATIVE, |
BFD_RELOC_X86_64_GOTPCREL, |
BFD_RELOC_X86_64_32S, |
|
/* ns32k relocations */ |
BFD_RELOC_NS32K_IMM_8, |
BFD_RELOC_NS32K_IMM_16, |
BFD_RELOC_NS32K_IMM_32, |
BFD_RELOC_NS32K_IMM_8_PCREL, |
BFD_RELOC_NS32K_IMM_16_PCREL, |
BFD_RELOC_NS32K_IMM_32_PCREL, |
BFD_RELOC_NS32K_DISP_8, |
BFD_RELOC_NS32K_DISP_16, |
BFD_RELOC_NS32K_DISP_32, |
BFD_RELOC_NS32K_DISP_8_PCREL, |
BFD_RELOC_NS32K_DISP_16_PCREL, |
BFD_RELOC_NS32K_DISP_32_PCREL, |
|
/* PDP11 relocations */ |
BFD_RELOC_PDP11_DISP_8_PCREL, |
BFD_RELOC_PDP11_DISP_6_PCREL, |
|
/* Picojava relocs. Not all of these appear in object files. */ |
BFD_RELOC_PJ_CODE_HI16, |
BFD_RELOC_PJ_CODE_LO16, |
BFD_RELOC_PJ_CODE_DIR16, |
BFD_RELOC_PJ_CODE_DIR32, |
BFD_RELOC_PJ_CODE_REL16, |
BFD_RELOC_PJ_CODE_REL32, |
|
/* Power(rs6000) and PowerPC relocations. */ |
BFD_RELOC_PPC_B26, |
BFD_RELOC_PPC_BA26, |
BFD_RELOC_PPC_TOC16, |
BFD_RELOC_PPC_B16, |
BFD_RELOC_PPC_B16_BRTAKEN, |
BFD_RELOC_PPC_B16_BRNTAKEN, |
BFD_RELOC_PPC_BA16, |
BFD_RELOC_PPC_BA16_BRTAKEN, |
BFD_RELOC_PPC_BA16_BRNTAKEN, |
BFD_RELOC_PPC_COPY, |
BFD_RELOC_PPC_GLOB_DAT, |
BFD_RELOC_PPC_JMP_SLOT, |
BFD_RELOC_PPC_RELATIVE, |
BFD_RELOC_PPC_LOCAL24PC, |
BFD_RELOC_PPC_EMB_NADDR32, |
BFD_RELOC_PPC_EMB_NADDR16, |
BFD_RELOC_PPC_EMB_NADDR16_LO, |
BFD_RELOC_PPC_EMB_NADDR16_HI, |
BFD_RELOC_PPC_EMB_NADDR16_HA, |
BFD_RELOC_PPC_EMB_SDAI16, |
BFD_RELOC_PPC_EMB_SDA2I16, |
BFD_RELOC_PPC_EMB_SDA2REL, |
BFD_RELOC_PPC_EMB_SDA21, |
BFD_RELOC_PPC_EMB_MRKREF, |
BFD_RELOC_PPC_EMB_RELSEC16, |
BFD_RELOC_PPC_EMB_RELST_LO, |
BFD_RELOC_PPC_EMB_RELST_HI, |
BFD_RELOC_PPC_EMB_RELST_HA, |
BFD_RELOC_PPC_EMB_BIT_FLD, |
BFD_RELOC_PPC_EMB_RELSDA, |
|
/* IBM 370/390 relocations */ |
BFD_RELOC_I370_D12, |
|
/* The type of reloc used to build a contructor table - at the moment |
probably a 32 bit wide absolute relocation, but the target can choose. |
It generally does map to one of the other relocation types. */ |
BFD_RELOC_CTOR, |
|
/* ARM 26 bit pc-relative branch. The lowest two bits must be zero and are |
not stored in the instruction. */ |
BFD_RELOC_ARM_PCREL_BRANCH, |
|
/* ARM 26 bit pc-relative branch. The lowest bit must be zero and is |
not stored in the instruction. The 2nd lowest bit comes from a 1 bit |
field in the instruction. */ |
BFD_RELOC_ARM_PCREL_BLX, |
|
/* Thumb 22 bit pc-relative branch. The lowest bit must be zero and is |
not stored in the instruction. The 2nd lowest bit comes from a 1 bit |
field in the instruction. */ |
BFD_RELOC_THUMB_PCREL_BLX, |
|
/* These relocs are only used within the ARM assembler. They are not |
(at present) written to any object files. */ |
BFD_RELOC_ARM_IMMEDIATE, |
BFD_RELOC_ARM_ADRL_IMMEDIATE, |
BFD_RELOC_ARM_OFFSET_IMM, |
BFD_RELOC_ARM_SHIFT_IMM, |
BFD_RELOC_ARM_SWI, |
BFD_RELOC_ARM_MULTI, |
BFD_RELOC_ARM_CP_OFF_IMM, |
BFD_RELOC_ARM_ADR_IMM, |
BFD_RELOC_ARM_LDR_IMM, |
BFD_RELOC_ARM_LITERAL, |
BFD_RELOC_ARM_IN_POOL, |
BFD_RELOC_ARM_OFFSET_IMM8, |
BFD_RELOC_ARM_HWLITERAL, |
BFD_RELOC_ARM_THUMB_ADD, |
BFD_RELOC_ARM_THUMB_IMM, |
BFD_RELOC_ARM_THUMB_SHIFT, |
BFD_RELOC_ARM_THUMB_OFFSET, |
BFD_RELOC_ARM_GOT12, |
BFD_RELOC_ARM_GOT32, |
BFD_RELOC_ARM_JUMP_SLOT, |
BFD_RELOC_ARM_COPY, |
BFD_RELOC_ARM_GLOB_DAT, |
BFD_RELOC_ARM_PLT32, |
BFD_RELOC_ARM_RELATIVE, |
BFD_RELOC_ARM_GOTOFF, |
BFD_RELOC_ARM_GOTPC, |
|
/* Hitachi SH relocs. Not all of these appear in object files. */ |
BFD_RELOC_SH_PCDISP8BY2, |
BFD_RELOC_SH_PCDISP12BY2, |
BFD_RELOC_SH_IMM4, |
BFD_RELOC_SH_IMM4BY2, |
BFD_RELOC_SH_IMM4BY4, |
BFD_RELOC_SH_IMM8, |
BFD_RELOC_SH_IMM8BY2, |
BFD_RELOC_SH_IMM8BY4, |
BFD_RELOC_SH_PCRELIMM8BY2, |
BFD_RELOC_SH_PCRELIMM8BY4, |
BFD_RELOC_SH_SWITCH16, |
BFD_RELOC_SH_SWITCH32, |
BFD_RELOC_SH_USES, |
BFD_RELOC_SH_COUNT, |
BFD_RELOC_SH_ALIGN, |
BFD_RELOC_SH_CODE, |
BFD_RELOC_SH_DATA, |
BFD_RELOC_SH_LABEL, |
BFD_RELOC_SH_LOOP_START, |
BFD_RELOC_SH_LOOP_END, |
BFD_RELOC_SH_COPY, |
BFD_RELOC_SH_GLOB_DAT, |
BFD_RELOC_SH_JMP_SLOT, |
BFD_RELOC_SH_RELATIVE, |
BFD_RELOC_SH_GOTPC, |
|
/* Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must |
be zero and is not stored in the instruction. */ |
BFD_RELOC_THUMB_PCREL_BRANCH9, |
BFD_RELOC_THUMB_PCREL_BRANCH12, |
BFD_RELOC_THUMB_PCREL_BRANCH23, |
|
/* ARC Cores relocs. |
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are |
not stored in the instruction. The high 20 bits are installed in bits 26 |
through 7 of the instruction. */ |
BFD_RELOC_ARC_B22_PCREL, |
|
/* ARC 26 bit absolute branch. The lowest two bits must be zero and are not |
stored in the instruction. The high 24 bits are installed in bits 23 |
through 0. */ |
BFD_RELOC_ARC_B26, |
|
/* Mitsubishi D10V relocs. |
This is a 10-bit reloc with the right 2 bits |
assumed to be 0. */ |
BFD_RELOC_D10V_10_PCREL_R, |
|
/* Mitsubishi D10V relocs. |
This is a 10-bit reloc with the right 2 bits |
assumed to be 0. This is the same as the previous reloc |
except it is in the left container, i.e., |
shifted left 15 bits. */ |
BFD_RELOC_D10V_10_PCREL_L, |
|
/* This is an 18-bit reloc with the right 2 bits |
assumed to be 0. */ |
BFD_RELOC_D10V_18, |
|
/* This is an 18-bit reloc with the right 2 bits |
assumed to be 0. */ |
BFD_RELOC_D10V_18_PCREL, |
|
/* Mitsubishi D30V relocs. |
This is a 6-bit absolute reloc. */ |
BFD_RELOC_D30V_6, |
|
/* This is a 6-bit pc-relative reloc with |
the right 3 bits assumed to be 0. */ |
BFD_RELOC_D30V_9_PCREL, |
|
/* This is a 6-bit pc-relative reloc with |
the right 3 bits assumed to be 0. Same |
as the previous reloc but on the right side |
of the container. */ |
BFD_RELOC_D30V_9_PCREL_R, |
|
/* This is a 12-bit absolute reloc with the |
right 3 bitsassumed to be 0. */ |
BFD_RELOC_D30V_15, |
|
/* This is a 12-bit pc-relative reloc with |
the right 3 bits assumed to be 0. */ |
BFD_RELOC_D30V_15_PCREL, |
|
/* This is a 12-bit pc-relative reloc with |
the right 3 bits assumed to be 0. Same |
as the previous reloc but on the right side |
of the container. */ |
BFD_RELOC_D30V_15_PCREL_R, |
|
/* This is an 18-bit absolute reloc with |
the right 3 bits assumed to be 0. */ |
BFD_RELOC_D30V_21, |
|
/* This is an 18-bit pc-relative reloc with |
the right 3 bits assumed to be 0. */ |
BFD_RELOC_D30V_21_PCREL, |
|
/* This is an 18-bit pc-relative reloc with |
the right 3 bits assumed to be 0. Same |
as the previous reloc but on the right side |
of the container. */ |
BFD_RELOC_D30V_21_PCREL_R, |
|
/* This is a 32-bit absolute reloc. */ |
BFD_RELOC_D30V_32, |
|
/* This is a 32-bit pc-relative reloc. */ |
BFD_RELOC_D30V_32_PCREL, |
|
/* Mitsubishi M32R relocs. |
This is a 24 bit absolute address. */ |
BFD_RELOC_M32R_24, |
|
/* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */ |
BFD_RELOC_M32R_10_PCREL, |
|
/* This is an 18-bit reloc with the right 2 bits assumed to be 0. */ |
BFD_RELOC_M32R_18_PCREL, |
|
/* This is a 26-bit reloc with the right 2 bits assumed to be 0. */ |
BFD_RELOC_M32R_26_PCREL, |
|
/* This is a 16-bit reloc containing the high 16 bits of an address |
used when the lower 16 bits are treated as unsigned. */ |
BFD_RELOC_M32R_HI16_ULO, |
|
/* This is a 16-bit reloc containing the high 16 bits of an address |
used when the lower 16 bits are treated as signed. */ |
BFD_RELOC_M32R_HI16_SLO, |
|
/* This is a 16-bit reloc containing the lower 16 bits of an address. */ |
BFD_RELOC_M32R_LO16, |
|
/* This is a 16-bit reloc containing the small data area offset for use in |
add3, load, and store instructions. */ |
BFD_RELOC_M32R_SDA16, |
|
/* This is a 9-bit reloc */ |
BFD_RELOC_V850_9_PCREL, |
|
/* This is a 22-bit reloc */ |
BFD_RELOC_V850_22_PCREL, |
|
/* This is a 16 bit offset from the short data area pointer. */ |
BFD_RELOC_V850_SDA_16_16_OFFSET, |
|
/* This is a 16 bit offset (of which only 15 bits are used) from the |
short data area pointer. */ |
BFD_RELOC_V850_SDA_15_16_OFFSET, |
|
/* This is a 16 bit offset from the zero data area pointer. */ |
BFD_RELOC_V850_ZDA_16_16_OFFSET, |
|
/* This is a 16 bit offset (of which only 15 bits are used) from the |
zero data area pointer. */ |
BFD_RELOC_V850_ZDA_15_16_OFFSET, |
|
/* This is an 8 bit offset (of which only 6 bits are used) from the |
tiny data area pointer. */ |
BFD_RELOC_V850_TDA_6_8_OFFSET, |
|
/* This is an 8bit offset (of which only 7 bits are used) from the tiny |
data area pointer. */ |
BFD_RELOC_V850_TDA_7_8_OFFSET, |
|
/* This is a 7 bit offset from the tiny data area pointer. */ |
BFD_RELOC_V850_TDA_7_7_OFFSET, |
|
/* This is a 16 bit offset from the tiny data area pointer. */ |
BFD_RELOC_V850_TDA_16_16_OFFSET, |
|
/* This is a 5 bit offset (of which only 4 bits are used) from the tiny |
data area pointer. */ |
BFD_RELOC_V850_TDA_4_5_OFFSET, |
|
/* This is a 4 bit offset from the tiny data area pointer. */ |
BFD_RELOC_V850_TDA_4_4_OFFSET, |
|
/* This is a 16 bit offset from the short data area pointer, with the |
bits placed non-contigously in the instruction. */ |
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET, |
|
/* This is a 16 bit offset from the zero data area pointer, with the |
bits placed non-contigously in the instruction. */ |
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET, |
|
/* This is a 6 bit offset from the call table base pointer. */ |
BFD_RELOC_V850_CALLT_6_7_OFFSET, |
|
/* This is a 16 bit offset from the call table base pointer. */ |
BFD_RELOC_V850_CALLT_16_16_OFFSET, |
|
|
/* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the |
instruction. */ |
BFD_RELOC_MN10300_32_PCREL, |
|
/* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the |
instruction. */ |
BFD_RELOC_MN10300_16_PCREL, |
|
/* This is a 8bit DP reloc for the tms320c30, where the most |
significant 8 bits of a 24 bit word are placed into the least |
significant 8 bits of the opcode. */ |
BFD_RELOC_TIC30_LDP, |
|
/* This is a 7bit reloc for the tms320c54x, where the least |
significant 7 bits of a 16 bit word are placed into the least |
significant 7 bits of the opcode. */ |
BFD_RELOC_TIC54X_PARTLS7, |
|
/* This is a 9bit DP reloc for the tms320c54x, where the most |
significant 9 bits of a 16 bit word are placed into the least |
significant 9 bits of the opcode. */ |
BFD_RELOC_TIC54X_PARTMS9, |
|
/* This is an extended address 23-bit reloc for the tms320c54x. */ |
BFD_RELOC_TIC54X_23, |
|
/* This is a 16-bit reloc for the tms320c54x, where the least |
significant 16 bits of a 23-bit extended address are placed into |
the opcode. */ |
BFD_RELOC_TIC54X_16_OF_23, |
|
/* This is a reloc for the tms320c54x, where the most |
significant 7 bits of a 23-bit extended address are placed into |
the opcode. */ |
BFD_RELOC_TIC54X_MS7_OF_23, |
|
/* This is a 48 bit reloc for the FR30 that stores 32 bits. */ |
BFD_RELOC_FR30_48, |
|
/* This is a 32 bit reloc for the FR30 that stores 20 bits split up into |
two sections. */ |
BFD_RELOC_FR30_20, |
|
/* This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in |
4 bits. */ |
BFD_RELOC_FR30_6_IN_4, |
|
/* This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset |
into 8 bits. */ |
BFD_RELOC_FR30_8_IN_8, |
|
/* This is a 16 bit reloc for the FR30 that stores a 9 bit short offset |
into 8 bits. */ |
BFD_RELOC_FR30_9_IN_8, |
|
/* This is a 16 bit reloc for the FR30 that stores a 10 bit word offset |
into 8 bits. */ |
BFD_RELOC_FR30_10_IN_8, |
|
/* This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative |
short offset into 8 bits. */ |
BFD_RELOC_FR30_9_PCREL, |
|
/* This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative |
short offset into 11 bits. */ |
BFD_RELOC_FR30_12_PCREL, |
|
/* Motorola Mcore relocations. */ |
BFD_RELOC_MCORE_PCREL_IMM8BY4, |
BFD_RELOC_MCORE_PCREL_IMM11BY2, |
BFD_RELOC_MCORE_PCREL_IMM4BY2, |
BFD_RELOC_MCORE_PCREL_32, |
BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2, |
BFD_RELOC_MCORE_RVA, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit pc relative |
short offset into 7 bits. */ |
BFD_RELOC_AVR_7_PCREL, |
|
/* This is a 16 bit reloc for the AVR that stores 13 bit pc relative |
short offset into 12 bits. */ |
BFD_RELOC_AVR_13_PCREL, |
|
/* This is a 16 bit reloc for the AVR that stores 17 bit value (usually |
program memory address) into 16 bits. */ |
BFD_RELOC_AVR_16_PM, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually |
data memory address) into 8 bit immediate value of LDI insn. */ |
BFD_RELOC_AVR_LO8_LDI, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
of data memory address) into 8 bit immediate value of LDI insn. */ |
BFD_RELOC_AVR_HI8_LDI, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit |
of program memory address) into 8 bit immediate value of LDI insn. */ |
BFD_RELOC_AVR_HH8_LDI, |
|
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value |
(usually data memory address) into 8 bit immediate value of SUBI insn. */ |
BFD_RELOC_AVR_LO8_LDI_NEG, |
|
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value |
(high 8 bit of data memory address) into 8 bit immediate value of |
SUBI insn. */ |
BFD_RELOC_AVR_HI8_LDI_NEG, |
|
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value |
(most high 8 bit of program memory address) into 8 bit immediate value |
of LDI or SUBI insn. */ |
BFD_RELOC_AVR_HH8_LDI_NEG, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually |
command address) into 8 bit immediate value of LDI insn. */ |
BFD_RELOC_AVR_LO8_LDI_PM, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
of command address) into 8 bit immediate value of LDI insn. */ |
BFD_RELOC_AVR_HI8_LDI_PM, |
|
/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit |
of command address) into 8 bit immediate value of LDI insn. */ |
BFD_RELOC_AVR_HH8_LDI_PM, |
|
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value |
(usually command address) into 8 bit immediate value of SUBI insn. */ |
BFD_RELOC_AVR_LO8_LDI_PM_NEG, |
|
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value |
(high 8 bit of 16 bit command address) into 8 bit immediate value |
of SUBI insn. */ |
BFD_RELOC_AVR_HI8_LDI_PM_NEG, |
|
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value |
(high 6 bit of 22 bit command address) into 8 bit immediate |
value of SUBI insn. */ |
BFD_RELOC_AVR_HH8_LDI_PM_NEG, |
|
/* This is a 32 bit reloc for the AVR that stores 23 bit value |
into 22 bits. */ |
BFD_RELOC_AVR_CALL, |
|
/* Direct 12 bit. */ |
BFD_RELOC_390_12, |
|
/* 12 bit GOT offset. */ |
BFD_RELOC_390_GOT12, |
|
/* 32 bit PC relative PLT address. */ |
BFD_RELOC_390_PLT32, |
|
/* Copy symbol at runtime. */ |
BFD_RELOC_390_COPY, |
|
/* Create GOT entry. */ |
BFD_RELOC_390_GLOB_DAT, |
|
/* Create PLT entry. */ |
BFD_RELOC_390_JMP_SLOT, |
|
/* Adjust by program base. */ |
BFD_RELOC_390_RELATIVE, |
|
/* 32 bit PC relative offset to GOT. */ |
BFD_RELOC_390_GOTPC, |
|
/* 16 bit GOT offset. */ |
BFD_RELOC_390_GOT16, |
|
/* PC relative 16 bit shifted by 1. */ |
BFD_RELOC_390_PC16DBL, |
|
/* 16 bit PC rel. PLT shifted by 1. */ |
BFD_RELOC_390_PLT16DBL, |
|
/* PC relative 32 bit shifted by 1. */ |
BFD_RELOC_390_PC32DBL, |
|
/* 32 bit PC rel. PLT shifted by 1. */ |
BFD_RELOC_390_PLT32DBL, |
|
/* 32 bit PC rel. GOT shifted by 1. */ |
BFD_RELOC_390_GOTPCDBL, |
|
/* 64 bit GOT offset. */ |
BFD_RELOC_390_GOT64, |
|
/* 64 bit PC relative PLT address. */ |
BFD_RELOC_390_PLT64, |
|
/* 32 bit rel. offset to GOT entry. */ |
BFD_RELOC_390_GOTENT, |
|
/* These two relocations are used by the linker to determine which of |
the entries in a C++ virtual function table are actually used. When |
the --gc-sections option is given, the linker will zero out the entries |
that are not used, so that the code for those functions need not be |
included in the output. |
|
VTABLE_INHERIT is a zero-space relocation used to describe to the |
linker the inheritence tree of a C++ virtual function table. The |
relocation's symbol should be the parent class' vtable, and the |
relocation should be located at the child vtable. |
|
VTABLE_ENTRY is a zero-space relocation that describes the use of a |
virtual function table entry. The reloc's symbol should refer to the |
table of the class mentioned in the code. Off of that base, an offset |
describes the entry that is being used. For Rela hosts, this offset |
is stored in the reloc's addend. For Rel hosts, we are forced to put |
this offset in the reloc's section offset. */ |
BFD_RELOC_VTABLE_INHERIT, |
BFD_RELOC_VTABLE_ENTRY, |
|
/* Intel IA64 Relocations. */ |
BFD_RELOC_IA64_IMM14, |
BFD_RELOC_IA64_IMM22, |
BFD_RELOC_IA64_IMM64, |
BFD_RELOC_IA64_DIR32MSB, |
BFD_RELOC_IA64_DIR32LSB, |
BFD_RELOC_IA64_DIR64MSB, |
BFD_RELOC_IA64_DIR64LSB, |
BFD_RELOC_IA64_GPREL22, |
BFD_RELOC_IA64_GPREL64I, |
BFD_RELOC_IA64_GPREL32MSB, |
BFD_RELOC_IA64_GPREL32LSB, |
BFD_RELOC_IA64_GPREL64MSB, |
BFD_RELOC_IA64_GPREL64LSB, |
BFD_RELOC_IA64_LTOFF22, |
BFD_RELOC_IA64_LTOFF64I, |
BFD_RELOC_IA64_PLTOFF22, |
BFD_RELOC_IA64_PLTOFF64I, |
BFD_RELOC_IA64_PLTOFF64MSB, |
BFD_RELOC_IA64_PLTOFF64LSB, |
BFD_RELOC_IA64_FPTR64I, |
BFD_RELOC_IA64_FPTR32MSB, |
BFD_RELOC_IA64_FPTR32LSB, |
BFD_RELOC_IA64_FPTR64MSB, |
BFD_RELOC_IA64_FPTR64LSB, |
BFD_RELOC_IA64_PCREL21B, |
BFD_RELOC_IA64_PCREL21BI, |
BFD_RELOC_IA64_PCREL21M, |
BFD_RELOC_IA64_PCREL21F, |
BFD_RELOC_IA64_PCREL22, |
BFD_RELOC_IA64_PCREL60B, |
BFD_RELOC_IA64_PCREL64I, |
BFD_RELOC_IA64_PCREL32MSB, |
BFD_RELOC_IA64_PCREL32LSB, |
BFD_RELOC_IA64_PCREL64MSB, |
BFD_RELOC_IA64_PCREL64LSB, |
BFD_RELOC_IA64_LTOFF_FPTR22, |
BFD_RELOC_IA64_LTOFF_FPTR64I, |
BFD_RELOC_IA64_LTOFF_FPTR64MSB, |
BFD_RELOC_IA64_LTOFF_FPTR64LSB, |
BFD_RELOC_IA64_SEGREL32MSB, |
BFD_RELOC_IA64_SEGREL32LSB, |
BFD_RELOC_IA64_SEGREL64MSB, |
BFD_RELOC_IA64_SEGREL64LSB, |
BFD_RELOC_IA64_SECREL32MSB, |
BFD_RELOC_IA64_SECREL32LSB, |
BFD_RELOC_IA64_SECREL64MSB, |
BFD_RELOC_IA64_SECREL64LSB, |
BFD_RELOC_IA64_REL32MSB, |
BFD_RELOC_IA64_REL32LSB, |
BFD_RELOC_IA64_REL64MSB, |
BFD_RELOC_IA64_REL64LSB, |
BFD_RELOC_IA64_LTV32MSB, |
BFD_RELOC_IA64_LTV32LSB, |
BFD_RELOC_IA64_LTV64MSB, |
BFD_RELOC_IA64_LTV64LSB, |
BFD_RELOC_IA64_IPLTMSB, |
BFD_RELOC_IA64_IPLTLSB, |
BFD_RELOC_IA64_COPY, |
BFD_RELOC_IA64_TPREL22, |
BFD_RELOC_IA64_TPREL64MSB, |
BFD_RELOC_IA64_TPREL64LSB, |
BFD_RELOC_IA64_LTOFF_TP22, |
BFD_RELOC_IA64_LTOFF22X, |
BFD_RELOC_IA64_LDXMOV, |
|
/* Motorola 68HC11 reloc. |
This is the 8 bits high part of an absolute address. */ |
BFD_RELOC_M68HC11_HI8, |
|
/* Motorola 68HC11 reloc. |
This is the 8 bits low part of an absolute address. */ |
BFD_RELOC_M68HC11_LO8, |
|
/* Motorola 68HC11 reloc. |
This is the 3 bits of a value. */ |
BFD_RELOC_M68HC11_3B, |
|
/* These relocs are only used within the CRIS assembler. They are not |
(at present) written to any object files. */ |
BFD_RELOC_CRIS_BDISP8, |
BFD_RELOC_CRIS_UNSIGNED_5, |
BFD_RELOC_CRIS_SIGNED_6, |
BFD_RELOC_CRIS_UNSIGNED_6, |
BFD_RELOC_CRIS_UNSIGNED_4, |
|
/* Relocs used in ELF shared libraries for CRIS. */ |
BFD_RELOC_CRIS_COPY, |
BFD_RELOC_CRIS_GLOB_DAT, |
BFD_RELOC_CRIS_JUMP_SLOT, |
BFD_RELOC_CRIS_RELATIVE, |
|
/* 32-bit offset to symbol-entry within GOT. */ |
BFD_RELOC_CRIS_32_GOT, |
|
/* 16-bit offset to symbol-entry within GOT. */ |
BFD_RELOC_CRIS_16_GOT, |
|
/* 32-bit offset to symbol-entry within GOT, with PLT handling. */ |
BFD_RELOC_CRIS_32_GOTPLT, |
|
/* 16-bit offset to symbol-entry within GOT, with PLT handling. */ |
BFD_RELOC_CRIS_16_GOTPLT, |
|
/* 32-bit offset to symbol, relative to GOT. */ |
BFD_RELOC_CRIS_32_GOTREL, |
|
/* 32-bit offset to symbol with PLT entry, relative to GOT. */ |
BFD_RELOC_CRIS_32_PLT_GOTREL, |
|
/* 32-bit offset to symbol with PLT entry, relative to this relocation. */ |
BFD_RELOC_CRIS_32_PLT_PCREL, |
|
/* Intel i860 Relocations. */ |
BFD_RELOC_860_COPY, |
BFD_RELOC_860_GLOB_DAT, |
BFD_RELOC_860_JUMP_SLOT, |
BFD_RELOC_860_RELATIVE, |
BFD_RELOC_860_PC26, |
BFD_RELOC_860_PLT26, |
BFD_RELOC_860_PC16, |
BFD_RELOC_860_LOW0, |
BFD_RELOC_860_SPLIT0, |
BFD_RELOC_860_LOW1, |
BFD_RELOC_860_SPLIT1, |
BFD_RELOC_860_LOW2, |
BFD_RELOC_860_SPLIT2, |
BFD_RELOC_860_LOW3, |
BFD_RELOC_860_LOGOT0, |
BFD_RELOC_860_SPGOT0, |
BFD_RELOC_860_LOGOT1, |
BFD_RELOC_860_SPGOT1, |
BFD_RELOC_860_LOGOTOFF0, |
BFD_RELOC_860_SPGOTOFF0, |
BFD_RELOC_860_LOGOTOFF1, |
BFD_RELOC_860_SPGOTOFF1, |
BFD_RELOC_860_LOGOTOFF2, |
BFD_RELOC_860_LOGOTOFF3, |
BFD_RELOC_860_LOPC, |
BFD_RELOC_860_HIGHADJ, |
BFD_RELOC_860_HAGOT, |
BFD_RELOC_860_HAGOTOFF, |
BFD_RELOC_860_HAPC, |
BFD_RELOC_860_HIGH, |
BFD_RELOC_860_HIGOT, |
BFD_RELOC_860_HIGOTOFF, |
|
/* OpenRISC Relocations. */ |
BFD_RELOC_OPENRISC_ABS_26, |
BFD_RELOC_OPENRISC_REL_26, |
BFD_RELOC_UNUSED }; |
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type; |
reloc_howto_type * |
bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code)); |
|
const char * |
bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code)); |
|
|
typedef struct symbol_cache_entry |
{ |
/* A pointer to the BFD which owns the symbol. This information |
is necessary so that a back end can work out what additional |
information (invisible to the application writer) is carried |
with the symbol. |
|
This field is *almost* redundant, since you can use section->owner |
instead, except that some symbols point to the global sections |
bfd_{abs,com,und}_section. This could be fixed by making |
these globals be per-bfd (or per-target-flavor). FIXME. */ |
|
struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */ |
|
/* The text of the symbol. The name is left alone, and not copied; the |
application may not alter it. */ |
CONST char *name; |
|
/* The value of the symbol. This really should be a union of a |
numeric value with a pointer, since some flags indicate that |
a pointer to another symbol is stored here. */ |
symvalue value; |
|
/* Attributes of a symbol: */ |
|
#define BSF_NO_FLAGS 0x00 |
|
/* The symbol has local scope; <<static>> in <<C>>. The value |
is the offset into the section of the data. */ |
#define BSF_LOCAL 0x01 |
|
/* The symbol has global scope; initialized data in <<C>>. The |
value is the offset into the section of the data. */ |
#define BSF_GLOBAL 0x02 |
|
/* The symbol has global scope and is exported. The value is |
the offset into the section of the data. */ |
#define BSF_EXPORT BSF_GLOBAL /* no real difference */ |
|
/* A normal C symbol would be one of: |
<<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or |
<<BSF_GLOBAL>> */ |
|
/* The symbol is a debugging record. The value has an arbitary |
meaning, unless BSF_DEBUGGING_RELOC is also set. */ |
#define BSF_DEBUGGING 0x08 |
|
/* The symbol denotes a function entry point. Used in ELF, |
perhaps others someday. */ |
#define BSF_FUNCTION 0x10 |
|
/* Used by the linker. */ |
#define BSF_KEEP 0x20 |
#define BSF_KEEP_G 0x40 |
|
/* A weak global symbol, overridable without warnings by |
a regular global symbol of the same name. */ |
#define BSF_WEAK 0x80 |
|
/* This symbol was created to point to a section, e.g. ELF's |
STT_SECTION symbols. */ |
#define BSF_SECTION_SYM 0x100 |
|
/* The symbol used to be a common symbol, but now it is |
allocated. */ |
#define BSF_OLD_COMMON 0x200 |
|
/* The default value for common data. */ |
#define BFD_FORT_COMM_DEFAULT_VALUE 0 |
|
/* In some files the type of a symbol sometimes alters its |
location in an output file - ie in coff a <<ISFCN>> symbol |
which is also <<C_EXT>> symbol appears where it was |
declared and not at the end of a section. This bit is set |
by the target BFD part to convey this information. */ |
|
#define BSF_NOT_AT_END 0x400 |
|
/* Signal that the symbol is the label of constructor section. */ |
#define BSF_CONSTRUCTOR 0x800 |
|
/* Signal that the symbol is a warning symbol. The name is a |
warning. The name of the next symbol is the one to warn about; |
if a reference is made to a symbol with the same name as the next |
symbol, a warning is issued by the linker. */ |
#define BSF_WARNING 0x1000 |
|
/* Signal that the symbol is indirect. This symbol is an indirect |
pointer to the symbol with the same name as the next symbol. */ |
#define BSF_INDIRECT 0x2000 |
|
/* BSF_FILE marks symbols that contain a file name. This is used |
for ELF STT_FILE symbols. */ |
#define BSF_FILE 0x4000 |
|
/* Symbol is from dynamic linking information. */ |
#define BSF_DYNAMIC 0x8000 |
|
/* The symbol denotes a data object. Used in ELF, and perhaps |
others someday. */ |
#define BSF_OBJECT 0x10000 |
|
/* This symbol is a debugging symbol. The value is the offset |
into the section of the data. BSF_DEBUGGING should be set |
as well. */ |
#define BSF_DEBUGGING_RELOC 0x20000 |
|
flagword flags; |
|
/* A pointer to the section to which this symbol is |
relative. This will always be non NULL, there are special |
sections for undefined and absolute symbols. */ |
struct sec *section; |
|
/* Back end special data. */ |
union |
{ |
PTR p; |
bfd_vma i; |
} udata; |
|
} asymbol; |
#define bfd_get_symtab_upper_bound(abfd) \ |
BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd)) |
boolean |
bfd_is_local_label PARAMS ((bfd *abfd, asymbol *sym)); |
|
boolean |
bfd_is_local_label_name PARAMS ((bfd *abfd, const char *name)); |
|
#define bfd_is_local_label_name(abfd, name) \ |
BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name)) |
#define bfd_canonicalize_symtab(abfd, location) \ |
BFD_SEND (abfd, _bfd_canonicalize_symtab,\ |
(abfd, location)) |
boolean |
bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count)); |
|
void |
bfd_print_symbol_vandf PARAMS ((PTR file, asymbol *symbol)); |
|
#define bfd_make_empty_symbol(abfd) \ |
BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd)) |
#define bfd_make_debug_symbol(abfd,ptr,size) \ |
BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size)) |
int |
bfd_decode_symclass PARAMS ((asymbol *symbol)); |
|
boolean |
bfd_is_undefined_symclass PARAMS ((int symclass)); |
|
void |
bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret)); |
|
boolean |
bfd_copy_private_symbol_data PARAMS ((bfd *ibfd, asymbol *isym, bfd *obfd, asymbol *osym)); |
|
#define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \ |
BFD_SEND (obfd, _bfd_copy_private_symbol_data, \ |
(ibfd, isymbol, obfd, osymbol)) |
struct _bfd |
{ |
/* The filename the application opened the BFD with. */ |
CONST char *filename; |
|
/* A pointer to the target jump table. */ |
const struct bfd_target *xvec; |
|
/* To avoid dragging too many header files into every file that |
includes `<<bfd.h>>', IOSTREAM has been declared as a "char |
*", and MTIME as a "long". Their correct types, to which they |
are cast when used, are "FILE *" and "time_t". The iostream |
is the result of an fopen on the filename. However, if the |
BFD_IN_MEMORY flag is set, then iostream is actually a pointer |
to a bfd_in_memory struct. */ |
PTR iostream; |
|
/* Is the file descriptor being cached? That is, can it be closed as |
needed, and re-opened when accessed later? */ |
|
boolean cacheable; |
|
/* Marks whether there was a default target specified when the |
BFD was opened. This is used to select which matching algorithm |
to use to choose the back end. */ |
|
boolean target_defaulted; |
|
/* The caching routines use these to maintain a |
least-recently-used list of BFDs */ |
|
struct _bfd *lru_prev, *lru_next; |
|
/* When a file is closed by the caching routines, BFD retains |
state information on the file here: */ |
|
file_ptr where; |
|
/* and here: (``once'' means at least once) */ |
|
boolean opened_once; |
|
/* Set if we have a locally maintained mtime value, rather than |
getting it from the file each time: */ |
|
boolean mtime_set; |
|
/* File modified time, if mtime_set is true: */ |
|
long mtime; |
|
/* Reserved for an unimplemented file locking extension.*/ |
|
int ifd; |
|
/* The format which belongs to the BFD. (object, core, etc.) */ |
|
bfd_format format; |
|
/* The direction the BFD was opened with*/ |
|
enum bfd_direction {no_direction = 0, |
read_direction = 1, |
write_direction = 2, |
both_direction = 3} direction; |
|
/* Format_specific flags*/ |
|
flagword flags; |
|
/* Currently my_archive is tested before adding origin to |
anything. I believe that this can become always an add of |
origin, with origin set to 0 for non archive files. */ |
|
file_ptr origin; |
|
/* Remember when output has begun, to stop strange things |
from happening. */ |
boolean output_has_begun; |
|
/* Pointer to linked list of sections*/ |
struct sec *sections; |
|
/* The number of sections */ |
unsigned int section_count; |
|
/* Stuff only useful for object files: |
The start address. */ |
bfd_vma start_address; |
|
/* Used for input and output*/ |
unsigned int symcount; |
|
/* Symbol table for output BFD (with symcount entries) */ |
struct symbol_cache_entry **outsymbols; |
|
/* Pointer to structure which contains architecture information*/ |
const struct bfd_arch_info *arch_info; |
|
/* Stuff only useful for archives:*/ |
PTR arelt_data; |
struct _bfd *my_archive; /* The containing archive BFD. */ |
struct _bfd *next; /* The next BFD in the archive. */ |
struct _bfd *archive_head; /* The first BFD in the archive. */ |
boolean has_armap; |
|
/* A chain of BFD structures involved in a link. */ |
struct _bfd *link_next; |
|
/* A field used by _bfd_generic_link_add_archive_symbols. This will |
be used only for archive elements. */ |
int archive_pass; |
|
/* Used by the back end to hold private data. */ |
|
union |
{ |
struct aout_data_struct *aout_data; |
struct artdata *aout_ar_data; |
struct _oasys_data *oasys_obj_data; |
struct _oasys_ar_data *oasys_ar_data; |
struct coff_tdata *coff_obj_data; |
struct pe_tdata *pe_obj_data; |
struct xcoff_tdata *xcoff_obj_data; |
struct ecoff_tdata *ecoff_obj_data; |
struct ieee_data_struct *ieee_data; |
struct ieee_ar_data_struct *ieee_ar_data; |
struct srec_data_struct *srec_data; |
struct ihex_data_struct *ihex_data; |
struct tekhex_data_struct *tekhex_data; |
struct elf_obj_tdata *elf_obj_data; |
struct nlm_obj_tdata *nlm_obj_data; |
struct bout_data_struct *bout_data; |
struct sun_core_struct *sun_core_data; |
struct sco5_core_struct *sco5_core_data; |
struct trad_core_struct *trad_core_data; |
struct som_data_struct *som_data; |
struct hpux_core_struct *hpux_core_data; |
struct hppabsd_core_struct *hppabsd_core_data; |
struct sgi_core_struct *sgi_core_data; |
struct lynx_core_struct *lynx_core_data; |
struct osf_core_struct *osf_core_data; |
struct cisco_core_struct *cisco_core_data; |
struct versados_data_struct *versados_data; |
struct netbsd_core_struct *netbsd_core_data; |
PTR any; |
} tdata; |
|
/* Used by the application to hold private data*/ |
PTR usrdata; |
|
/* Where all the allocated stuff under this BFD goes. This is a |
struct objalloc *, but we use PTR to avoid requiring the inclusion of |
objalloc.h. */ |
PTR memory; |
}; |
|
typedef enum bfd_error |
{ |
bfd_error_no_error = 0, |
bfd_error_system_call, |
bfd_error_invalid_target, |
bfd_error_wrong_format, |
bfd_error_invalid_operation, |
bfd_error_no_memory, |
bfd_error_no_symbols, |
bfd_error_no_armap, |
bfd_error_no_more_archived_files, |
bfd_error_malformed_archive, |
bfd_error_file_not_recognized, |
bfd_error_file_ambiguously_recognized, |
bfd_error_no_contents, |
bfd_error_nonrepresentable_section, |
bfd_error_no_debug_section, |
bfd_error_bad_value, |
bfd_error_file_truncated, |
bfd_error_file_too_big, |
bfd_error_invalid_error_code |
} bfd_error_type; |
|
bfd_error_type |
bfd_get_error PARAMS ((void)); |
|
void |
bfd_set_error PARAMS ((bfd_error_type error_tag)); |
|
CONST char * |
bfd_errmsg PARAMS ((bfd_error_type error_tag)); |
|
void |
bfd_perror PARAMS ((CONST char *message)); |
|
typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...)); |
|
bfd_error_handler_type |
bfd_set_error_handler PARAMS ((bfd_error_handler_type)); |
|
void |
bfd_set_error_program_name PARAMS ((const char *)); |
|
bfd_error_handler_type |
bfd_get_error_handler PARAMS ((void)); |
|
long |
bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect)); |
|
long |
bfd_canonicalize_reloc PARAMS ((bfd *abfd, |
asection *sec, |
arelent **loc, |
asymbol **syms)); |
|
void |
bfd_set_reloc PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count) |
|
); |
|
boolean |
bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags)); |
|
int |
bfd_get_arch_size PARAMS ((bfd *abfd)); |
|
int |
bfd_get_sign_extend_vma PARAMS ((bfd *abfd)); |
|
boolean |
bfd_set_start_address PARAMS ((bfd *abfd, bfd_vma vma)); |
|
long |
bfd_get_mtime PARAMS ((bfd *abfd)); |
|
long |
bfd_get_size PARAMS ((bfd *abfd)); |
|
int |
bfd_get_gp_size PARAMS ((bfd *abfd)); |
|
void |
bfd_set_gp_size PARAMS ((bfd *abfd, int i)); |
|
bfd_vma |
bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base)); |
|
boolean |
bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd)); |
|
#define bfd_copy_private_bfd_data(ibfd, obfd) \ |
BFD_SEND (obfd, _bfd_copy_private_bfd_data, \ |
(ibfd, obfd)) |
boolean |
bfd_merge_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd)); |
|
#define bfd_merge_private_bfd_data(ibfd, obfd) \ |
BFD_SEND (obfd, _bfd_merge_private_bfd_data, \ |
(ibfd, obfd)) |
boolean |
bfd_set_private_flags PARAMS ((bfd *abfd, flagword flags)); |
|
#define bfd_set_private_flags(abfd, flags) \ |
BFD_SEND (abfd, _bfd_set_private_flags, \ |
(abfd, flags)) |
#define bfd_sizeof_headers(abfd, reloc) \ |
BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc)) |
|
#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \ |
BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line)) |
|
/* Do these three do anything useful at all, for any back end? */ |
#define bfd_debug_info_start(abfd) \ |
BFD_SEND (abfd, _bfd_debug_info_start, (abfd)) |
|
#define bfd_debug_info_end(abfd) \ |
BFD_SEND (abfd, _bfd_debug_info_end, (abfd)) |
|
#define bfd_debug_info_accumulate(abfd, section) \ |
BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section)) |
|
|
#define bfd_stat_arch_elt(abfd, stat) \ |
BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat)) |
|
#define bfd_update_armap_timestamp(abfd) \ |
BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd)) |
|
#define bfd_set_arch_mach(abfd, arch, mach)\ |
BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach)) |
|
#define bfd_relax_section(abfd, section, link_info, again) \ |
BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again)) |
|
#define bfd_gc_sections(abfd, link_info) \ |
BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info)) |
|
#define bfd_merge_sections(abfd, link_info) \ |
BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info)) |
|
#define bfd_link_hash_table_create(abfd) \ |
BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd)) |
|
#define bfd_link_add_symbols(abfd, info) \ |
BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info)) |
|
#define bfd_final_link(abfd, info) \ |
BFD_SEND (abfd, _bfd_final_link, (abfd, info)) |
|
#define bfd_free_cached_info(abfd) \ |
BFD_SEND (abfd, _bfd_free_cached_info, (abfd)) |
|
#define bfd_get_dynamic_symtab_upper_bound(abfd) \ |
BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd)) |
|
#define bfd_print_private_bfd_data(abfd, file)\ |
BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file)) |
|
#define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \ |
BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols)) |
|
#define bfd_get_dynamic_reloc_upper_bound(abfd) \ |
BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd)) |
|
#define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \ |
BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms)) |
|
extern bfd_byte *bfd_get_relocated_section_contents |
PARAMS ((bfd *, struct bfd_link_info *, |
struct bfd_link_order *, bfd_byte *, |
boolean, asymbol **)); |
|
symindex |
bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym)); |
|
boolean |
bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head)); |
|
bfd * |
bfd_openr_next_archived_file PARAMS ((bfd *archive, bfd *previous)); |
|
CONST char * |
bfd_core_file_failing_command PARAMS ((bfd *abfd)); |
|
int |
bfd_core_file_failing_signal PARAMS ((bfd *abfd)); |
|
boolean |
core_file_matches_executable_p PARAMS ((bfd *core_bfd, bfd *exec_bfd)); |
|
#define BFD_SEND(bfd, message, arglist) \ |
((*((bfd)->xvec->message)) arglist) |
|
#ifdef DEBUG_BFD_SEND |
#undef BFD_SEND |
#define BFD_SEND(bfd, message, arglist) \ |
(((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \ |
((*((bfd)->xvec->message)) arglist) : \ |
(bfd_assert (__FILE__,__LINE__), NULL)) |
#endif |
#define BFD_SEND_FMT(bfd, message, arglist) \ |
(((bfd)->xvec->message[(int) ((bfd)->format)]) arglist) |
|
#ifdef DEBUG_BFD_SEND |
#undef BFD_SEND_FMT |
#define BFD_SEND_FMT(bfd, message, arglist) \ |
(((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \ |
(((bfd)->xvec->message[(int) ((bfd)->format)]) arglist) : \ |
(bfd_assert (__FILE__,__LINE__), NULL)) |
#endif |
enum bfd_flavour { |
bfd_target_unknown_flavour, |
bfd_target_aout_flavour, |
bfd_target_coff_flavour, |
bfd_target_ecoff_flavour, |
bfd_target_xcoff_flavour, |
bfd_target_elf_flavour, |
bfd_target_ieee_flavour, |
bfd_target_nlm_flavour, |
bfd_target_oasys_flavour, |
bfd_target_tekhex_flavour, |
bfd_target_srec_flavour, |
bfd_target_ihex_flavour, |
bfd_target_som_flavour, |
bfd_target_os9k_flavour, |
bfd_target_versados_flavour, |
bfd_target_msdos_flavour, |
bfd_target_ovax_flavour, |
bfd_target_evax_flavour |
}; |
|
enum bfd_endian { BFD_ENDIAN_BIG, BFD_ENDIAN_LITTLE, BFD_ENDIAN_UNKNOWN }; |
|
/* Forward declaration. */ |
typedef struct bfd_link_info _bfd_link_info; |
|
typedef struct bfd_target |
{ |
char *name; |
enum bfd_flavour flavour; |
enum bfd_endian byteorder; |
enum bfd_endian header_byteorder; |
flagword object_flags; |
flagword section_flags; |
char symbol_leading_char; |
char ar_pad_char; |
unsigned short ar_max_namelen; |
bfd_vma (*bfd_getx64) PARAMS ((const bfd_byte *)); |
bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *)); |
void (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *)); |
bfd_vma (*bfd_getx32) PARAMS ((const bfd_byte *)); |
bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((const bfd_byte *)); |
void (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *)); |
bfd_vma (*bfd_getx16) PARAMS ((const bfd_byte *)); |
bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((const bfd_byte *)); |
void (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *)); |
bfd_vma (*bfd_h_getx64) PARAMS ((const bfd_byte *)); |
bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((const bfd_byte *)); |
void (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *)); |
bfd_vma (*bfd_h_getx32) PARAMS ((const bfd_byte *)); |
bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((const bfd_byte *)); |
void (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *)); |
bfd_vma (*bfd_h_getx16) PARAMS ((const bfd_byte *)); |
bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *)); |
void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *)); |
const struct bfd_target *(*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *)); |
boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *)); |
boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *)); |
|
/* Generic entry points. */ |
#define BFD_JUMP_TABLE_GENERIC(NAME)\ |
CAT(NAME,_close_and_cleanup),\ |
CAT(NAME,_bfd_free_cached_info),\ |
CAT(NAME,_new_section_hook),\ |
CAT(NAME,_get_section_contents),\ |
CAT(NAME,_get_section_contents_in_window) |
|
/* Called when the BFD is being closed to do any necessary cleanup. */ |
boolean (*_close_and_cleanup) PARAMS ((bfd *)); |
/* Ask the BFD to free all cached information. */ |
boolean (*_bfd_free_cached_info) PARAMS ((bfd *)); |
/* Called when a new section is created. */ |
boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr)); |
/* Read the contents of a section. */ |
boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR, |
file_ptr, bfd_size_type)); |
boolean (*_bfd_get_section_contents_in_window) |
PARAMS ((bfd *, sec_ptr, bfd_window *, |
file_ptr, bfd_size_type)); |
|
/* Entry points to copy private data. */ |
#define BFD_JUMP_TABLE_COPY(NAME)\ |
CAT(NAME,_bfd_copy_private_bfd_data),\ |
CAT(NAME,_bfd_merge_private_bfd_data),\ |
CAT(NAME,_bfd_copy_private_section_data),\ |
CAT(NAME,_bfd_copy_private_symbol_data),\ |
CAT(NAME,_bfd_set_private_flags),\ |
CAT(NAME,_bfd_print_private_bfd_data)\ |
/* Called to copy BFD general private data from one object file |
to another. */ |
boolean (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *)); |
/* Called to merge BFD general private data from one object file |
to a common output file when linking. */ |
boolean (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *)); |
/* Called to copy BFD private section data from one object file |
to another. */ |
boolean (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr, |
bfd *, sec_ptr)); |
/* Called to copy BFD private symbol data from one symbol |
to another. */ |
boolean (*_bfd_copy_private_symbol_data) PARAMS ((bfd *, asymbol *, |
bfd *, asymbol *)); |
/* Called to set private backend flags */ |
boolean (*_bfd_set_private_flags) PARAMS ((bfd *, flagword)); |
|
/* Called to print private BFD data */ |
boolean (*_bfd_print_private_bfd_data) PARAMS ((bfd *, PTR)); |
|
/* Core file entry points. */ |
#define BFD_JUMP_TABLE_CORE(NAME)\ |
CAT(NAME,_core_file_failing_command),\ |
CAT(NAME,_core_file_failing_signal),\ |
CAT(NAME,_core_file_matches_executable_p) |
char * (*_core_file_failing_command) PARAMS ((bfd *)); |
int (*_core_file_failing_signal) PARAMS ((bfd *)); |
boolean (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *)); |
|
/* Archive entry points. */ |
#define BFD_JUMP_TABLE_ARCHIVE(NAME)\ |
CAT(NAME,_slurp_armap),\ |
CAT(NAME,_slurp_extended_name_table),\ |
CAT(NAME,_construct_extended_name_table),\ |
CAT(NAME,_truncate_arname),\ |
CAT(NAME,_write_armap),\ |
CAT(NAME,_read_ar_hdr),\ |
CAT(NAME,_openr_next_archived_file),\ |
CAT(NAME,_get_elt_at_index),\ |
CAT(NAME,_generic_stat_arch_elt),\ |
CAT(NAME,_update_armap_timestamp) |
boolean (*_bfd_slurp_armap) PARAMS ((bfd *)); |
boolean (*_bfd_slurp_extended_name_table) PARAMS ((bfd *)); |
boolean (*_bfd_construct_extended_name_table) |
PARAMS ((bfd *, char **, bfd_size_type *, const char **)); |
void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *)); |
boolean (*write_armap) PARAMS ((bfd *arch, |
unsigned int elength, |
struct orl *map, |
unsigned int orl_count, |
int stridx)); |
PTR (*_bfd_read_ar_hdr_fn) PARAMS ((bfd *)); |
bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev)); |
#define bfd_get_elt_at_index(b,i) BFD_SEND(b, _bfd_get_elt_at_index, (b,i)) |
bfd * (*_bfd_get_elt_at_index) PARAMS ((bfd *, symindex)); |
int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *)); |
boolean (*_bfd_update_armap_timestamp) PARAMS ((bfd *)); |
|
/* Entry points used for symbols. */ |
#define BFD_JUMP_TABLE_SYMBOLS(NAME)\ |
CAT(NAME,_get_symtab_upper_bound),\ |
CAT(NAME,_get_symtab),\ |
CAT(NAME,_make_empty_symbol),\ |
CAT(NAME,_print_symbol),\ |
CAT(NAME,_get_symbol_info),\ |
CAT(NAME,_bfd_is_local_label_name),\ |
CAT(NAME,_get_lineno),\ |
CAT(NAME,_find_nearest_line),\ |
CAT(NAME,_bfd_make_debug_symbol),\ |
CAT(NAME,_read_minisymbols),\ |
CAT(NAME,_minisymbol_to_symbol) |
long (*_bfd_get_symtab_upper_bound) PARAMS ((bfd *)); |
long (*_bfd_canonicalize_symtab) PARAMS ((bfd *, |
struct symbol_cache_entry **)); |
struct symbol_cache_entry * |
(*_bfd_make_empty_symbol) PARAMS ((bfd *)); |
void (*_bfd_print_symbol) PARAMS ((bfd *, PTR, |
struct symbol_cache_entry *, |
bfd_print_symbol_type)); |
#define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e)) |
void (*_bfd_get_symbol_info) PARAMS ((bfd *, |
struct symbol_cache_entry *, |
symbol_info *)); |
#define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e)) |
boolean (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *)); |
|
alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *)); |
boolean (*_bfd_find_nearest_line) PARAMS ((bfd *abfd, |
struct sec *section, struct symbol_cache_entry **symbols, |
bfd_vma offset, CONST char **file, CONST char **func, |
unsigned int *line)); |
/* Back-door to allow format-aware applications to create debug symbols |
while using BFD for everything else. Currently used by the assembler |
when creating COFF files. */ |
asymbol * (*_bfd_make_debug_symbol) PARAMS (( |
bfd *abfd, |
void *ptr, |
unsigned long size)); |
#define bfd_read_minisymbols(b, d, m, s) \ |
BFD_SEND (b, _read_minisymbols, (b, d, m, s)) |
long (*_read_minisymbols) PARAMS ((bfd *, boolean, PTR *, |
unsigned int *)); |
#define bfd_minisymbol_to_symbol(b, d, m, f) \ |
BFD_SEND (b, _minisymbol_to_symbol, (b, d, m, f)) |
asymbol *(*_minisymbol_to_symbol) PARAMS ((bfd *, boolean, const PTR, |
asymbol *)); |
|
/* Routines for relocs. */ |
#define BFD_JUMP_TABLE_RELOCS(NAME)\ |
CAT(NAME,_get_reloc_upper_bound),\ |
CAT(NAME,_canonicalize_reloc),\ |
CAT(NAME,_bfd_reloc_type_lookup) |
long (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr)); |
long (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **, |
struct symbol_cache_entry **)); |
/* See documentation on reloc types. */ |
reloc_howto_type * |
(*reloc_type_lookup) PARAMS ((bfd *abfd, |
bfd_reloc_code_real_type code)); |
|
/* Routines used when writing an object file. */ |
#define BFD_JUMP_TABLE_WRITE(NAME)\ |
CAT(NAME,_set_arch_mach),\ |
CAT(NAME,_set_section_contents) |
boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture, |
unsigned long)); |
boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR, |
file_ptr, bfd_size_type)); |
|
/* Routines used by the linker. */ |
#define BFD_JUMP_TABLE_LINK(NAME)\ |
CAT(NAME,_sizeof_headers),\ |
CAT(NAME,_bfd_get_relocated_section_contents),\ |
CAT(NAME,_bfd_relax_section),\ |
CAT(NAME,_bfd_link_hash_table_create),\ |
CAT(NAME,_bfd_link_add_symbols),\ |
CAT(NAME,_bfd_final_link),\ |
CAT(NAME,_bfd_link_split_section),\ |
CAT(NAME,_bfd_gc_sections),\ |
CAT(NAME,_bfd_merge_sections) |
int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean)); |
bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *, |
struct bfd_link_info *, struct bfd_link_order *, |
bfd_byte *data, boolean relocateable, |
struct symbol_cache_entry **)); |
|
boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *, |
struct bfd_link_info *, boolean *again)); |
|
/* Create a hash table for the linker. Different backends store |
different information in this table. */ |
struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *)); |
|
/* Add symbols from this object file into the hash table. */ |
boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* Do a link based on the link_order structures attached to each |
section of the BFD. */ |
boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* Should this section be split up into smaller pieces during linking. */ |
boolean (*_bfd_link_split_section) PARAMS ((bfd *, struct sec *)); |
|
/* Remove sections that are not referenced from the output. */ |
boolean (*_bfd_gc_sections) PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* Attempt to merge SEC_MERGE sections. */ |
boolean (*_bfd_merge_sections) PARAMS ((bfd *, struct bfd_link_info *)); |
|
/* Routines to handle dynamic symbols and relocs. */ |
#define BFD_JUMP_TABLE_DYNAMIC(NAME)\ |
CAT(NAME,_get_dynamic_symtab_upper_bound),\ |
CAT(NAME,_canonicalize_dynamic_symtab),\ |
CAT(NAME,_get_dynamic_reloc_upper_bound),\ |
CAT(NAME,_canonicalize_dynamic_reloc) |
/* Get the amount of memory required to hold the dynamic symbols. */ |
long (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *)); |
/* Read in the dynamic symbols. */ |
long (*_bfd_canonicalize_dynamic_symtab) |
PARAMS ((bfd *, struct symbol_cache_entry **)); |
/* Get the amount of memory required to hold the dynamic relocs. */ |
long (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *)); |
/* Read in the dynamic relocs. */ |
long (*_bfd_canonicalize_dynamic_reloc) |
PARAMS ((bfd *, arelent **, struct symbol_cache_entry **)); |
|
/* Opposite endian version of this target. */ |
const struct bfd_target * alternative_target; |
|
PTR backend_data; |
|
} bfd_target; |
boolean |
bfd_set_default_target PARAMS ((const char *name)); |
|
const bfd_target * |
bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd)); |
|
const char ** |
bfd_target_list PARAMS ((void)); |
|
const bfd_target * |
bfd_search_for_target PARAMS ((int (* search_func) (const bfd_target *, void *), void *)); |
|
boolean |
bfd_check_format PARAMS ((bfd *abfd, bfd_format format)); |
|
boolean |
bfd_check_format_matches PARAMS ((bfd *abfd, bfd_format format, char ***matching)); |
|
boolean |
bfd_set_format PARAMS ((bfd *abfd, bfd_format format)); |
|
CONST char * |
bfd_format_string PARAMS ((bfd_format format)); |
|
#ifdef __cplusplus |
} |
#endif |
#endif |