Subversion Repositories Kolibri OS

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;                                                              ;;

;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;;

;; Distributed under terms of the GNU General Public License    ;;

;;                                                              ;;

;;  STACK.INC                                                   ;;

;;                                                              ;;

;;  TCP/IP stack for Menuet OS                                  ;;

;;                                                              ;;

;;  Version 0.7  4th July 2004                                  ;;

;;                                                              ;;

;;  Copyright 2002 Mike Hibbett, mikeh@oceanfree.net            ;;

;;                                                              ;;

;;  See file COPYING for details                                ;;

;;                                                              ;;

;; Version 0.7                                                  ;;

;;      Added a timer per socket to allow delays when rx window ;;

;;      gets below 1KB                                          ;;

;;                                                              ;;

;;10.01.2007 Bugfix for checksum function from Paolo Franchetti ;;

;;                                                              ;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

$Revision: 913 $

;*******************************************************************

;   Interface

;      The interfaces defined in ETHERNET.INC plus:

;      stack_init

;      stack_handler

;      app_stack_handler

;      app_socket_handler

;      checksum

;

;*******************************************************************

uglobal

StackCounters:

  dumped_rx_count     dd  0

  arp_tx_count:       dd  0

  arp_rx_count:       dd  0

  ip_rx_count:	      dd  0

  ip_tx_count:	      dd  0

endg

; socket buffers

SOCKETBUFFSIZE	   equ	      4096  ; state + config + buffer.

SOCKETHEADERSIZE   equ	      76+8+8  ; thus 4096 - SOCKETHEADERSIZE bytes data

;NUM_SOCKETS        equ        16    ; Number of open sockets supported. Was 20

; IPBUFF status values

BUFF_EMPTY	   equ	   0

BUFF_RX_FULL	   equ	   1

BUFF_ALLOCATED	   equ	   2

BUFF_TX_FULL	   equ	   3

NUM_IPBUFFERS	   equ	   20	 ; buffers allocated for TX/RX

NUMQUEUES	   equ	      4

EMPTY_QUEUE	   equ	      0

IPIN_QUEUE	   equ	      1

IPOUT_QUEUE	   equ	      2

NET1OUT_QUEUE	   equ	      3

NO_BUFFER	   equ	      0xFFFF

IPBUFFSIZE	   equ	      1500		  ; MTU of an ethernet packet

NUMQUEUEENTRIES    equ	      NUM_IPBUFFERS

NUMRESENDENTRIES    equ 	18		; Buffers for TCP resend packets

; These are the 0x40 function codes for application access to the stack

STACK_DRIVER_STATUS  equ   52

SOCKET_INTERFACE     equ   53

; 128KB allocated for the stack and network driver buffers and other

; data requirements

;stack_data_start     equ   0x700000

;eth_data_start       equ   0x700000

;stack_data           equ   0x704000

;stack_data_end       equ   0x71ffff

; 32 bit word

stack_config	     equ   stack_data

; 32 bit word - IP Address in network format

stack_ip	     equ   stack_data + 4

; 1 byte. 0 == inactive, 1 = active

ethernet_active      equ   stack_data + 9

; TODO :: empty memory area

; Address of selected socket

;sktAddr              equ   stack_data + 32

; Parameter to checksum routine - data ptr

checkAdd1	     equ   stack_data + 36

; Parameter to checksum routine - 2nd data ptr

checkAdd2	     equ   stack_data + 40

; Parameter to checksum routine - data size

checkSize1	     equ   stack_data + 44

; Parameter to checksum routine - 2nd data size

checkSize2	     equ   stack_data + 46

; result of checksum routine

checkResult	     equ   stack_data + 48

; holds the TCP/UDP pseudo header. SA|DA|0|prot|UDP len|

pseudoHeader	     equ   stack_data + 50

; receive and transmit IP buffer allocation

;sockets              equ   stack_data + 62

Next_free2 equ stack_data + 62;Next_free2           equ   sockets + (SOCKETBUFFSIZE * NUM_SOCKETS)

; 1560 byte buffer for rx / tx ethernet packets

Ether_buffer	     equ   Next_free2

Next_free3	     equ   Ether_buffer + 1518

last_1sTick	     equ   Next_free3

IPbuffs 	     equ   Next_free3 + 1

queues		     equ   IPbuffs + ( NUM_IPBUFFERS * IPBUFFSIZE )

queueList	     equ   queues + (2 * NUMQUEUES)

last_1hsTick	     equ   queueList + ( 2 * NUMQUEUEENTRIES )

;resendQ              equ   queueList + ( 2 * NUMQUEUEENTRIES )

;resendBuffer         equ    resendQ + ( 4 * NUMRESENDENTRIES ) ; for TCP

;                    equ    resendBuffer + ( IPBUFFSIZE * NUMRESENDENTRIES )

;resendQ             equ     0x770000

;resendBuffer        equ     resendQ + ( 4 * NUMRESENDENTRIES ) ; for TCP        ; XTODO: validate size

resendBuffer	    equ     resendQ + ( 8 * NUMRESENDENTRIES ) ; for TCP

uglobal

net_sockets rd 2

endg

; simple macro for memory set operation

macro _memset_dw adr,value,amount

{

	mov	edi, adr

	mov	ecx, amount

	if value = 0

		xor	eax, eax

	else

		mov	eax, value

	end if

	cld

	rep	stosd

}

; Below, the main network layer source code is included

;

include "queue.inc"

include "eth_drv/ethernet.inc"

include "ip.inc"

include "socket.inc"

;***************************************************************************

;   Function

;      stack_init

;

;   Description

;      Clear all allocated memory to zero. This ensures that

;       on startup, the stack is inactive, and consumes no resources

;       This is a kernel function, called prior to the OS main loop

;       in set_variables

;

;***************************************************************************

stack_init:

	; Init two address spaces with default values

	_memset_dw	stack_data_start, 0, 0x20000/4

	_memset_dw	resendQ, 0, NUMRESENDENTRIES * 2

	mov	[net_sockets], 0

	mov	[net_sockets + 4], 0

	; Queries initialization

	call	queueInit

	; The following block sets up the 1s timer

	mov	al, 0x0

	out	0x70, al

	in	al, 0x71

	mov	[last_1sTick], al

ret

;***************************************************************************

;   Function

;      stack_handler

;

;   Description

;       The kernel loop routine for the stack

;       This is a kernel function, called in the main loop

;

;***************************************************************************

stack_handler:

    call    ethernet_driver

    call    ip_rx

    ; Test for 10ms tick, call tcp timer

    mov     eax, [timer_ticks] ;[0xfdf0]

    cmp     eax, [last_1hsTick]

    je	    sh_001

    mov     [last_1hsTick], eax

    call    tcp_tx_handler

sh_001:

    ; Test for 1 second event, call 1s timer functions

    mov     al, 0x0   ;second

    out     0x70, al

    in	    al, 0x71

    cmp     al, [last_1sTick]

    je	    sh_exit

    mov     [last_1sTick], al

    stdcall arp_table_manager, ARP_TABLE_TIMER, 0, 0

    call    tcp_tcb_handler

sh_exit:

    ret

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; Checksum [by Johnny_B]

;;  IN:

;;    buf_ptr=POINTER to buffer

;;    buf_size=SIZE of buffer

;;  OUT:

;;    AX=16-bit checksum

;;              Saves all used registers

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc checksum_jb stdcall uses ebx esi ecx,\

     buf_ptr:DWORD, buf_size:DWORD

    xor     eax, eax

    xor     ebx, ebx  ;accumulator

    mov     esi, dword[buf_ptr]

    mov     ecx, dword[buf_size]

    shr     ecx, 1  ; ecx=ecx/2

    jnc     @f	    ; if CF==0 then size is even number

    mov     bh, byte[esi + ecx*2]

  @@:

    cld

  .loop:

    lodsw   ;eax=word[esi],esi=esi+2

    xchg    ah,al    ;cause must be a net byte-order

    add     ebx, eax

    loop    .loop

    mov     eax, ebx

    shr     eax, 16

    add     ax, bx

    not     ax

    ret

endp

;***************************************************************************

;   Function

;      checksum

;

;   Description

;       checkAdd1,checkAdd2, checkSize1, checkSize2, checkResult

;       Dont break anything; Most registers are used by the caller

;       This code is derived from the 'C' source, cksum.c, in the book

;       Internetworking with TCP/IP Volume II by D.E. Comer

;

;***************************************************************************

checksum:

    pusha

    mov     eax, [checkAdd1]

    xor     edx, edx		      ; edx is the accumulative checksum

    xor     ebx, ebx

    mov     cx, [checkSize1]

    shr     cx, 1

    jz	    cs1_1

cs1:

    mov     bh, [eax]

    mov     bl, [eax + 1]

    add     eax, 2

    add     edx, ebx

    loopw   cs1

cs1_1:

    and     word [checkSize1], 0x01

    jz	    cs_test2

    mov     bh, [eax]

    xor     bl, bl

    add     edx, ebx

cs_test2:

    mov     cx, [checkSize2]

    cmp     cx, 0

    jz	    cs_exit			; Finished if no 2nd buffer

    mov     eax, [checkAdd2]

    shr     cx, 1

    jz	    cs2_1

cs2:

    mov     bh, [eax]

    mov     bl, [eax + 1]

    add     eax, 2

    add     edx, ebx

    loopw   cs2

cs2_1:

    and     word [checkSize2], 0x01

    jz	    cs_exit

    mov     bh, [eax]

    xor     bl, bl

    add     edx, ebx

cs_exit:

    mov     ebx, edx

    shr     ebx, 16

    and     edx, 0xffff

    add     edx, ebx

    mov     eax, edx

    shr     eax, 16

    add     edx, eax

    not     dx

    mov     [checkResult], dx

    popa

    ret

;***************************************************************************

;   Function

;      app_stack_handler

;

;   Description

;       This is an application service, called by int 0x40, function 52

;       It provides application access to the network interface layer

;

;***************************************************************************

app_stack_handler:

    cmp     eax, 0

    jnz     not0

    ; Read the configuration word

    mov     eax, [stack_config]

    ret

not0:

    cmp     eax, 1

    jnz     not1

    ; read the IP address

    mov     eax, [stack_ip]

    ret

not1:

    cmp     eax, 2

    jnz     not2

    ; write the configuration word

    mov     [stack_config], ebx

    ; 

    ; If ethernet now enabled, probe for the card, reset it and empty

    ; the packet buffer

    ; If all successfull, enable the card.

    ; If ethernet now disabled, set it as disabled. Should really

    ; empty the tcpip data area too.

    ; ethernet interface is '3' in ls 7 bits

    and     bl, 0x7f

    cmp     bl, 3

    je	     ash_eth_enable

    ; Ethernet isn't enabled, so make sure that the card is disabled

    mov     [ethernet_active], byte 0

    ret

ash_eth_enable:

    ; Probe for the card. This will reset it and enable the interface

    ; if found

    call    eth_probe

    cmp     eax, 0

    je	    ash_eth_done	    ; Abort if no hardware found

    mov     [ethernet_active], byte 1

ash_eth_done:

    ret

not2:

    cmp     eax, 3

    jnz     not3

    ; write the IP Address

    mov     [stack_ip], ebx

    ret

;old functions was deleted

not3:

    cmp     eax, 6

    jnz     not6

    ; Insert an IP packet into the stacks received packet queue

    call    stack_insert_packet

    ret

not6:

    cmp     eax, 7

    jnz     not7

    ; Test for any packets queued for transmission over the network

not7:

    cmp     eax, 8

    jnz     not8

    call    stack_get_packet

    ; Extract a packet queued for transmission by the network

    ret

not8:

    cmp     eax, 9

    jnz     not9

    ; read the gateway IP address

    mov     eax, [gateway_ip]

    ret

not9:

    cmp     eax, 10

    jnz     not10

    ; read the subnet mask

    mov     eax, [subnet_mask]

    ret

not10:

    cmp     eax, 11

    jnz     not11

    ; write the gateway IP Address

    mov     [gateway_ip], ebx

    ret

not11:

    cmp     eax, 12

    jnz     not12

    ; write the subnet mask

    mov     [subnet_mask], ebx

not12:

    cmp     eax, 13

    jnz     not13

    ; read the dns

    mov     eax, [dns_ip]

    ret

not13:

    cmp     eax, 14

    jnz     not14

    ; write the dns IP Address

    mov     [dns_ip], ebx

    ret

;

not14:

	cmp	eax, 15

	jnz	not15

    ; in ebx we need 4 to read the last 2 bytes

	cmp	ebx, dword 4

	je	read

    ; or we need 0 to read the first 4 bytes

	cmp	ebx, dword 0

	jnz	param_error

    ; read MAC, returned (in mirrored byte order) in eax

read:

	mov	eax, [node_addr + ebx]

	jmp	@f

param_error:

	mov	eax, -1     ; params not accepted

@@:

	ret

; 0 -> arp_probe

; 1 -> arp_announce

; 2 -> arp_responce (not supported yet)

not15:					; ARP stuff

	cmp	eax, 16

	jnz	not16

	cmp	ebx, 0

	je	a_probe

	cmp	ebx, 1

	je	a_ann			; arp announce

;       cmp     ebx,2

;       jne     a_resp                  ; arp response

	jmp	param15_error

; arp probe, sender IP must be set to 0.0.0.0, target IP is set to address being probed

; ecx: pointer to target MAC, MAC should set to 0 by application

; edx: target IP

a_probe:

	push	dword [stack_ip]

	mov	edx, [stack_ip]

	mov	[stack_ip], dword 0

	mov	esi, ecx		; pointer to target MAC address

	call	arp_request

	pop	dword [stack_ip]

	jmp	@f

; arp announce, sender IP must be set to target IP

; ecx: pointer to target MAC

a_ann:

	mov	edx, [stack_ip]

	mov	esi, ecx		; pointer to target MAC address

	call	arp_request

	jmp	@f

param15_error:

	mov	eax, -1

@@:

	ret

;

; modified by [smb]

;

; ARPTable manager interface

not16:

    cmp     eax, 17

    jnz     stack_driver_end

    ;see "proc arp_table_manager" for more details

    stdcall arp_table_manager,ebx,ecx,edx  ;Opcode,Index,Extra

    ret

;

stack_driver_end:

	ret

;***************************************************************************

;   Function

;      app_socket_handler

;

;   Description

;       This is an application service, called by int 0x40, function 53

;       It provides application access to stack socket services

;       such as opening sockets

;

;***************************************************************************

app_socket_handler:

    cmp     eax, 0

    jnz     nots0

    call    socket_open

    ret

nots0:

    cmp     eax, 1

    jnz     nots1

    call    socket_close

    ret

nots1:

    cmp     eax, 2

    jnz     nots2

    call    socket_poll

    ret

nots2:

    cmp     eax, 3

    jnz     nots3

    call    socket_read

    ret

nots3:

    cmp     eax, 4

    jnz     nots4

    call    socket_write

    ret

nots4:

    cmp     eax, 5

    jnz     nots5

    call    socket_open_tcp

    ret

nots5:

    cmp     eax, 6

    jnz     nots6

    call    socket_status

    ret

nots6:

    cmp     eax, 7

    jnz     nots7

    call    socket_write_tcp

    ret

nots7:

    cmp     eax, 8

    jnz     nots8

    call    socket_close_tcp

    ret

nots8:

    cmp     eax, 9

    jnz     nots9

    call    is_localport_unused

    ret

nots9:

    cmp     eax, 10

    jnz     nots10

    mov     eax,dword[drvr_cable]

    test    eax,eax

    jnz     @f		      ; if function is not implented, return -1

    mov     al,-1

    ret

   @@:

    call    dword[drvr_cable]

    ret

nots10:

    cmp     eax, 11

    jnz     nots11

    call    socket_read_packet

    ret

nots11:

    cmp     eax, 254

    jnz     notdump

    ret

notdump:

    cmp     eax, 255

    jnz     notsdebug

    ; This sub function allows access to debugging information on the stack

    ; ebx holds the request:

    ;  100 : return length of empty queue

    ;  101 : return length of IPOUT QUEUE

    ;  102 : return length of IPIN QUEUE

    ;  103 : return length of NET1OUT QUEUE

    ; 200 : return # of ARP entries

    ; 201 : return size of ARP table ( max # entries )

    ; 202 : select ARP table entry #

    ; 203 : return IP of selected table entry

    ; 204 : return High 4 bytes of MAC address of selected table entry

    ; 205 : return low  2 bytes of MAC address of selected table entry

    ; 206 : return status word of selected table entry

    ; 207 : return Time to live of selected table entry

    ;  2 : return number of IP packets received

    ;  3 : return number of packets transmitted

    ;  4 : return number of received packets dumped

    ;  5 : return number of arp packets received

    ;  6 : return status of packet driver

    ;      ( 0 == not active, FFFFFFFF = successful )

    call    stack_internal_status

    ret

notsdebug:

    ; Invalid Option

    ret

uglobal

  ARPTmp:

  times 14 db 0

endg

;***************************************************************************

;   Function

;      stack_internal_status

;

;   Description

;       Returns information about the internal status of the stack

;       This is only useful for debugging

;       It works with the ethernet driver

;       sub function in ebx

;       return requested data in eax

;

;***************************************************************************

stack_internal_status:

    cmp     ebx, 100

    jnz     notsis100

    ;  100 : return length of EMPTY QUEUE

    mov     ebx, EMPTY_QUEUE

    call    queueSize

    ret

notsis100:

    cmp     ebx, 101

    jnz     notsis101

    ;  101 : return length of IPOUT QUEUE

    mov     ebx, IPOUT_QUEUE

    call    queueSize

    ret

notsis101:

    cmp     ebx, 102

    jnz     notsis102

    ;  102 : return length of IPIN QUEUE

    mov     ebx, IPIN_QUEUE

    call    queueSize

    ret

notsis102:

    cmp     ebx, 103

    jnz     notsis103

    ;  103 : return length of NET1OUT QUEUE

    mov     ebx, NET1OUT_QUEUE

    call    queueSize

    ret

notsis103:

    cmp     ebx, 200

    jnz     notsis200

    ; 200 : return num entries in arp table

    movzx   eax, byte [NumARP]

    ret

notsis200:

    cmp     ebx, 201

    jnz     notsis201

    ; 201 : return arp table size

    mov     eax, 20 ; ARP_TABLE_SIZE

    ret

notsis201:

    cmp     ebx, 202

    jnz     notsis202

    ; 202 - read the requested table entry

    ; into a temporary buffer

    ; ecx holds the entry number

    mov     eax, ecx

    mov     ecx, 14 ; ARP_ENTRY_SIZE

    mul     ecx

    mov     ecx, [eax + ARPTable]

    mov     [ARPTmp], ecx

    mov     ecx, [eax + ARPTable+4]

    mov     [ARPTmp+4], ecx

    mov     ecx, [eax + ARPTable+8]

    mov     [ARPTmp+8], ecx

    mov     cx, [eax + ARPTable+12]

    mov     [ARPTmp+12], cx

    ret

notsis202:

    cmp     ebx, 203

    jnz     notsis203

    ; 203 - return IP address

    mov     eax, [ARPTmp]

    ret

notsis203:

    cmp     ebx, 204

    jnz     notsis204

    ; 204 - return MAC high dword

    mov     eax, [ARPTmp+4]

    ret

notsis204:

    cmp     ebx, 205

    jnz     notsis205

    ; 205 - return MAC ls word

    movzx   eax, word [ARPTmp+8]

    ret

notsis205:

    cmp     ebx, 206

    jnz     notsis206

    ; 206 - return status word

    movzx   eax, word [ARPTmp+10]

    ret

notsis206:

    cmp     ebx, 207

    jnz     notsis207

    ; 207 - return ttl word

    movzx   eax, word [ARPTmp+12]

    ret

notsis207:

    cmp     ebx, 2

    jnz     notsis2

    ;  2 : return number of IP packets received

    mov     eax, [ip_rx_count]

    ret

notsis2:

    cmp     ebx, 3

    jnz     notsis3

    ;  3 : return number of packets transmitted

    mov     eax, [ip_tx_count]

    ret

notsis3:

    cmp     ebx, 4

    jnz     notsis4

    ;  4 : return number of received packets dumped

    mov     eax, [dumped_rx_count]

    ret

notsis4:

    cmp     ebx, 5

    jnz     notsis5

    ;  5 : return number of arp packets received

    mov     eax, [arp_rx_count]

    ret

notsis5:

    cmp     ebx, 6

    jnz     notsis6

    ;  6 : return status of packet driver

    ;  ( 0 == not active, FFFFFFFF = successful )

    mov     eax, [eth_status]

    ret

notsis6:

    xor     eax, eax

    ret

;***************************************************************************

;   Function

;      stack_get_packet

;

;   Description

;       extracts an IP packet from the NET1 output queue

;       and sends the data to the calling process

;       pointer to data in edx

;       returns number of bytes read in eax

;

;***************************************************************************

stack_get_packet:

    ; Look for a buffer to tx

    mov     eax, NET1OUT_QUEUE

    call    dequeue

    cmp     ax, NO_BUFFER

    je	    sgp_non_exit	    ; Exit if no buffer available

    push    eax 		    ; Save buffer number for freeing at end

    push    edx

    ; convert buffer pointer eax to the absolute address

    mov     ecx, IPBUFFSIZE

    mul     ecx

    add     eax, IPbuffs

    pop     edx

    push    eax 		    ; save address of IP data

    ; Get the address of the callers data

    mov     edi,[TASK_BASE]

    add     edi,TASKDATA.mem_start

    add     edx,[edi]

    mov     edi, edx

    pop     eax

    mov     ecx, 1500		; should get the actual number of bytes to write

    mov     esi, eax

    cld

    rep     movsb		; copy the data across

    ; And finally, return the buffer to the free queue

    pop     eax

    call    freeBuff

    mov     eax, 1500

    ret

sgp_non_exit:

    xor     eax, eax

    ret

;***************************************************************************

;   Function

;      stack_insert_packet

;

;   Description

;       writes an IP packet into the stacks receive queue

;       # of bytes to write in ecx

;       pointer to data in edx

;       returns 0 in eax ok, -1 == failed

;

;***************************************************************************

stack_insert_packet:

    mov     eax, EMPTY_QUEUE

    call    dequeue

    cmp     ax, NO_BUFFER

    je	    sip_err_exit

    push    eax

    ; save the pointers to the data buffer & size

    push    edx

    push    ecx

    ; convert buffer pointer eax to the absolute address

    mov     ecx, IPBUFFSIZE

    mul     ecx

    add     eax, IPbuffs

    mov     edx, eax

    ; So, edx holds the IPbuffer ptr

    pop     ecx 		    ; count of bytes to send

    mov     ebx, ecx		    ; need the length later

    pop     eax 		    ; get callers ptr to data to send

    ; Get the address of the callers data

    mov     edi,[TASK_BASE]

    add     edi,TASKDATA.mem_start

    add     eax,[edi]

    mov     esi, eax

    mov     edi, edx

    cld

    rep     movsb		; copy the data across

    pop     ebx

    mov     eax, IPIN_QUEUE

    call    queue

    inc     dword [ip_rx_count]

    mov     eax, 0

    ret

sip_err_exit:

    mov     eax, 0xFFFFFFFF

    ret