Subversion Repositories Kolibri OS

/*

 * Copyright © 2006-2007 Intel Corporation

 *

 * Permission is hereby granted, free of charge, to any person obtaining a

 * copy of this software and associated documentation files (the "Software"),

 * to deal in the Software without restriction, including without limitation

 * the rights to use, copy, modify, merge, publish, distribute, sublicense,

 * and/or sell copies of the Software, and to permit persons to whom the

 * Software is furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice (including the next

 * paragraph) shall be included in all copies or substantial portions of the

 * Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

 * DEALINGS IN THE SOFTWARE.

 *

 * Authors:

 *	Eric Anholt 

 */

#include 

#include 

#include 

#include 

#include 

#include 

#include 

#include 

#include "intel_drv.h"

#include 

#include "i915_drv.h"

/* Here's the desired hotplug mode */

#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\

			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\

			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\

			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\

			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\

			   ADPA_CRT_HOTPLUG_ENABLE)

struct intel_crt {

	struct intel_encoder base;

	/* DPMS state is stored in the connector, which we need in the

	 * encoder's enable/disable callbacks */

	struct intel_connector *connector;

	bool force_hotplug_required;

	u32 adpa_reg;

};

static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)

{

	return container_of(encoder, struct intel_crt, base);

}

static struct intel_crt *intel_attached_crt(struct drm_connector *connector)

{

	return intel_encoder_to_crt(intel_attached_encoder(connector));

}

static bool intel_crt_get_hw_state(struct intel_encoder *encoder,

				   enum pipe *pipe)

{

	struct drm_device *dev = encoder->base.dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_crt *crt = intel_encoder_to_crt(encoder);

	enum intel_display_power_domain power_domain;

	u32 tmp;

	power_domain = intel_display_port_power_domain(encoder);

	if (!intel_display_power_is_enabled(dev_priv, power_domain))

		return false;

	tmp = I915_READ(crt->adpa_reg);

	if (!(tmp & ADPA_DAC_ENABLE))

		return false;

	if (HAS_PCH_CPT(dev))

		*pipe = PORT_TO_PIPE_CPT(tmp);

	else

		*pipe = PORT_TO_PIPE(tmp);

	return true;

}

static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)

{

	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;

	struct intel_crt *crt = intel_encoder_to_crt(encoder);

	u32 tmp, flags = 0;

	tmp = I915_READ(crt->adpa_reg);

	if (tmp & ADPA_HSYNC_ACTIVE_HIGH)

		flags |= DRM_MODE_FLAG_PHSYNC;

	else

		flags |= DRM_MODE_FLAG_NHSYNC;

	if (tmp & ADPA_VSYNC_ACTIVE_HIGH)

		flags |= DRM_MODE_FLAG_PVSYNC;

	else

		flags |= DRM_MODE_FLAG_NVSYNC;

	return flags;

}

static void intel_crt_get_config(struct intel_encoder *encoder,

				 struct intel_crtc_state *pipe_config)

{

	struct drm_device *dev = encoder->base.dev;

	int dotclock;

	pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);

	dotclock = pipe_config->port_clock;

	if (HAS_PCH_SPLIT(dev))

		ironlake_check_encoder_dotclock(pipe_config, dotclock);

	pipe_config->base.adjusted_mode.crtc_clock = dotclock;

}

static void hsw_crt_get_config(struct intel_encoder *encoder,

			       struct intel_crtc_state *pipe_config)

{

	intel_ddi_get_config(encoder, pipe_config);

	pipe_config->base.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |

					      DRM_MODE_FLAG_NHSYNC |

					      DRM_MODE_FLAG_PVSYNC |

					      DRM_MODE_FLAG_NVSYNC);

	pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);

}

/* Note: The caller is required to filter out dpms modes not supported by the

 * platform. */

static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)

{

	struct drm_device *dev = encoder->base.dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_crt *crt = intel_encoder_to_crt(encoder);

	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);

	const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;

	u32 adpa;

	if (INTEL_INFO(dev)->gen >= 5)

		adpa = ADPA_HOTPLUG_BITS;

	else

		adpa = 0;

	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)

		adpa |= ADPA_HSYNC_ACTIVE_HIGH;

	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)

		adpa |= ADPA_VSYNC_ACTIVE_HIGH;

	/* For CPT allow 3 pipe config, for others just use A or B */

	if (HAS_PCH_LPT(dev))

		; /* Those bits don't exist here */

	else if (HAS_PCH_CPT(dev))

		adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);

	else if (crtc->pipe == 0)

		adpa |= ADPA_PIPE_A_SELECT;

	else

		adpa |= ADPA_PIPE_B_SELECT;

	if (!HAS_PCH_SPLIT(dev))

		I915_WRITE(BCLRPAT(crtc->pipe), 0);

	switch (mode) {

	case DRM_MODE_DPMS_ON:

		adpa |= ADPA_DAC_ENABLE;

		break;

	case DRM_MODE_DPMS_STANDBY:

		adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;

		break;

	case DRM_MODE_DPMS_SUSPEND:

		adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;

		break;

	case DRM_MODE_DPMS_OFF:

		adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;

		break;

	}

	I915_WRITE(crt->adpa_reg, adpa);

}

static void intel_disable_crt(struct intel_encoder *encoder)

{

	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);

}

static void pch_disable_crt(struct intel_encoder *encoder)

{

}

static void pch_post_disable_crt(struct intel_encoder *encoder)

{

	intel_disable_crt(encoder);

}

static void intel_enable_crt(struct intel_encoder *encoder)

{

	struct intel_crt *crt = intel_encoder_to_crt(encoder);

	intel_crt_set_dpms(encoder, crt->connector->base.dpms);

}

static enum drm_mode_status

intel_crt_mode_valid(struct drm_connector *connector,

		     struct drm_display_mode *mode)

{

	struct drm_device *dev = connector->dev;

	int max_clock = 0;

	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)

		return MODE_NO_DBLESCAN;

	if (mode->clock < 25000)

		return MODE_CLOCK_LOW;

	if (IS_GEN2(dev))

		max_clock = 350000;

	else

		max_clock = 400000;

	if (mode->clock > max_clock)

		return MODE_CLOCK_HIGH;

	/* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */

	if (HAS_PCH_LPT(dev) &&

	    (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))

		return MODE_CLOCK_HIGH;

	return MODE_OK;

}

static bool intel_crt_compute_config(struct intel_encoder *encoder,

				     struct intel_crtc_state *pipe_config)

{

	struct drm_device *dev = encoder->base.dev;

	if (HAS_PCH_SPLIT(dev))

		pipe_config->has_pch_encoder = true;

	/* LPT FDI RX only supports 8bpc. */

	if (HAS_PCH_LPT(dev))

		pipe_config->pipe_bpp = 24;

	/* FDI must always be 2.7 GHz */

	if (HAS_DDI(dev)) {

		pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;

		pipe_config->port_clock = 135000 * 2;

		pipe_config->dpll_hw_state.wrpll = 0;

		pipe_config->dpll_hw_state.spll =

			SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;

	}

	return true;

}

static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)

{

	struct drm_device *dev = connector->dev;

	struct intel_crt *crt = intel_attached_crt(connector);

	struct drm_i915_private *dev_priv = dev->dev_private;

	u32 adpa;

	bool ret;

	/* The first time through, trigger an explicit detection cycle */

	if (crt->force_hotplug_required) {

		bool turn_off_dac = HAS_PCH_SPLIT(dev);

		u32 save_adpa;

		crt->force_hotplug_required = 0;

		save_adpa = adpa = I915_READ(crt->adpa_reg);

		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);

		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;

		if (turn_off_dac)

			adpa &= ~ADPA_DAC_ENABLE;

		I915_WRITE(crt->adpa_reg, adpa);

		if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,

			     1000))

			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");

		if (turn_off_dac) {

			I915_WRITE(crt->adpa_reg, save_adpa);

			POSTING_READ(crt->adpa_reg);

		}

	}

	/* Check the status to see if both blue and green are on now */

	adpa = I915_READ(crt->adpa_reg);

	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)

		ret = true;

	else

		ret = false;

	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);

	return ret;

}

static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)

{

	struct drm_device *dev = connector->dev;

	struct intel_crt *crt = intel_attached_crt(connector);

	struct drm_i915_private *dev_priv = dev->dev_private;

	u32 adpa;

	bool ret;

	u32 save_adpa;

	save_adpa = adpa = I915_READ(crt->adpa_reg);

	DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);

	adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;

	I915_WRITE(crt->adpa_reg, adpa);

	if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,

		     1000)) {

		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");

		I915_WRITE(crt->adpa_reg, save_adpa);

	}

	/* Check the status to see if both blue and green are on now */

	adpa = I915_READ(crt->adpa_reg);

	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)

		ret = true;

	else

		ret = false;

	DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);

	return ret;

}

/**

 * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.

 *

 * Not for i915G/i915GM

 *

 * \return true if CRT is connected.

 * \return false if CRT is disconnected.

 */

static bool intel_crt_detect_hotplug(struct drm_connector *connector)

{

	struct drm_device *dev = connector->dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	u32 stat;

	bool ret = false;

	int i, tries = 0;

	if (HAS_PCH_SPLIT(dev))

		return intel_ironlake_crt_detect_hotplug(connector);

	if (IS_VALLEYVIEW(dev))

		return valleyview_crt_detect_hotplug(connector);

	/*

	 * On 4 series desktop, CRT detect sequence need to be done twice

	 * to get a reliable result.

	 */

	if (IS_G4X(dev) && !IS_GM45(dev))

		tries = 2;

	else

		tries = 1;

	for (i = 0; i < tries ; i++) {

		/* turn on the FORCE_DETECT */

		i915_hotplug_interrupt_update(dev_priv,

					      CRT_HOTPLUG_FORCE_DETECT,

					      CRT_HOTPLUG_FORCE_DETECT);

		/* wait for FORCE_DETECT to go off */

		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &

			      CRT_HOTPLUG_FORCE_DETECT) == 0,

			     1000))

			DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");

	}

	stat = I915_READ(PORT_HOTPLUG_STAT);

	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)

		ret = true;

	/* clear the interrupt we just generated, if any */

	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);

	i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0);

	return ret;

}

static struct edid *intel_crt_get_edid(struct drm_connector *connector,

				struct i2c_adapter *i2c)

{

	struct edid *edid;

	edid = drm_get_edid(connector, i2c);

	if (!edid && !intel_gmbus_is_forced_bit(i2c)) {

		DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");

		intel_gmbus_force_bit(i2c, true);

		edid = drm_get_edid(connector, i2c);

		intel_gmbus_force_bit(i2c, false);

	}

	return edid;

}

/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */

static int intel_crt_ddc_get_modes(struct drm_connector *connector,

				struct i2c_adapter *adapter)

{

	struct edid *edid;

	int ret;

	edid = intel_crt_get_edid(connector, adapter);

	if (!edid)

		return 0;

	ret = intel_connector_update_modes(connector, edid);

	kfree(edid);

	return ret;

}

static bool intel_crt_detect_ddc(struct drm_connector *connector)

{

	struct intel_crt *crt = intel_attached_crt(connector);

	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;

	struct edid *edid;

	struct i2c_adapter *i2c;

	BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);

	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);

	edid = intel_crt_get_edid(connector, i2c);

	if (edid) {

		bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;

		/*

		 * This may be a DVI-I connector with a shared DDC

		 * link between analog and digital outputs, so we

		 * have to check the EDID input spec of the attached device.

		 */

		if (!is_digital) {

			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");

			return true;

		}

		DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");

	} else {

		DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");

	}

	kfree(edid);

	return false;

}

static enum drm_connector_status

intel_crt_load_detect(struct intel_crt *crt)

{

	struct drm_device *dev = crt->base.base.dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;

	uint32_t save_bclrpat;

	uint32_t save_vtotal;

	uint32_t vtotal, vactive;

	uint32_t vsample;

	uint32_t vblank, vblank_start, vblank_end;

	uint32_t dsl;

	uint32_t bclrpat_reg;

	uint32_t vtotal_reg;

	uint32_t vblank_reg;

	uint32_t vsync_reg;

	uint32_t pipeconf_reg;

	uint32_t pipe_dsl_reg;

	uint8_t	st00;

	enum drm_connector_status status;

	DRM_DEBUG_KMS("starting load-detect on CRT\n");

	bclrpat_reg = BCLRPAT(pipe);

	vtotal_reg = VTOTAL(pipe);

	vblank_reg = VBLANK(pipe);

	vsync_reg = VSYNC(pipe);

	pipeconf_reg = PIPECONF(pipe);

	pipe_dsl_reg = PIPEDSL(pipe);

	save_bclrpat = I915_READ(bclrpat_reg);

	save_vtotal = I915_READ(vtotal_reg);

	vblank = I915_READ(vblank_reg);

	vtotal = ((save_vtotal >> 16) & 0xfff) + 1;

	vactive = (save_vtotal & 0x7ff) + 1;

	vblank_start = (vblank & 0xfff) + 1;

	vblank_end = ((vblank >> 16) & 0xfff) + 1;

	/* Set the border color to purple. */

	I915_WRITE(bclrpat_reg, 0x500050);

	if (!IS_GEN2(dev)) {

		uint32_t pipeconf = I915_READ(pipeconf_reg);

		I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);

		POSTING_READ(pipeconf_reg);

		/* Wait for next Vblank to substitue

		 * border color for Color info */

		intel_wait_for_vblank(dev, pipe);

		st00 = I915_READ8(VGA_MSR_WRITE);

		status = ((st00 & (1 << 4)) != 0) ?

			connector_status_connected :

			connector_status_disconnected;

		I915_WRITE(pipeconf_reg, pipeconf);

	} else {

		bool restore_vblank = false;

		int count, detect;

		/*

		* If there isn't any border, add some.

		* Yes, this will flicker

		*/

		if (vblank_start <= vactive && vblank_end >= vtotal) {

			uint32_t vsync = I915_READ(vsync_reg);

			uint32_t vsync_start = (vsync & 0xffff) + 1;

			vblank_start = vsync_start;

			I915_WRITE(vblank_reg,

				   (vblank_start - 1) |

				   ((vblank_end - 1) << 16));

			restore_vblank = true;

		}

		/* sample in the vertical border, selecting the larger one */

		if (vblank_start - vactive >= vtotal - vblank_end)

			vsample = (vblank_start + vactive) >> 1;

		else

			vsample = (vtotal + vblank_end) >> 1;

		/*

		 * Wait for the border to be displayed

		 */

		while (I915_READ(pipe_dsl_reg) >= vactive)

			;

		while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)

			;

		/*

		 * Watch ST00 for an entire scanline

		 */

		detect = 0;

		count = 0;

		do {

			count++;

			/* Read the ST00 VGA status register */

			st00 = I915_READ8(VGA_MSR_WRITE);

			if (st00 & (1 << 4))

				detect++;

		} while ((I915_READ(pipe_dsl_reg) == dsl));

		/* restore vblank if necessary */

		if (restore_vblank)

			I915_WRITE(vblank_reg, vblank);

		/*

		 * If more than 3/4 of the scanline detected a monitor,

		 * then it is assumed to be present. This works even on i830,

		 * where there isn't any way to force the border color across

		 * the screen

		 */

		status = detect * 4 > count * 3 ?

			 connector_status_connected :

			 connector_status_disconnected;

	}

	/* Restore previous settings */

	I915_WRITE(bclrpat_reg, save_bclrpat);

	return status;

}

static enum drm_connector_status

intel_crt_detect(struct drm_connector *connector, bool force)

{

	struct drm_device *dev = connector->dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_crt *crt = intel_attached_crt(connector);

	struct intel_encoder *intel_encoder = &crt->base;

	enum intel_display_power_domain power_domain;

	enum drm_connector_status status;

	struct intel_load_detect_pipe tmp;

	struct drm_modeset_acquire_ctx ctx;

	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",

		      connector->base.id, connector->name,

		      force);

	power_domain = intel_display_port_power_domain(intel_encoder);

	intel_display_power_get(dev_priv, power_domain);

	if (I915_HAS_HOTPLUG(dev)) {

		/* We can not rely on the HPD pin always being correctly wired

		 * up, for example many KVM do not pass it through, and so

		 * only trust an assertion that the monitor is connected.

		 */

		if (intel_crt_detect_hotplug(connector)) {

			DRM_DEBUG_KMS("CRT detected via hotplug\n");

			status = connector_status_connected;

			goto out;

		} else

			DRM_DEBUG_KMS("CRT not detected via hotplug\n");

	}

	if (intel_crt_detect_ddc(connector)) {

		status = connector_status_connected;

		goto out;

	}

	/* Load detection is broken on HPD capable machines. Whoever wants a

	 * broken monitor (without edid) to work behind a broken kvm (that fails

	 * to have the right resistors for HP detection) needs to fix this up.

	 * For now just bail out. */

	if (I915_HAS_HOTPLUG(dev) && !i915.load_detect_test) {

		status = connector_status_disconnected;

		goto out;

	}

	if (!force) {

		status = connector->status;

		goto out;

	}

	drm_modeset_acquire_init(&ctx, 0);

	/* for pre-945g platforms use load detect */

	if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) {

		if (intel_crt_detect_ddc(connector))

			status = connector_status_connected;

		else if (INTEL_INFO(dev)->gen < 4)

			status = intel_crt_load_detect(crt);

		else

			status = connector_status_unknown;

		intel_release_load_detect_pipe(connector, &tmp, &ctx);

	} else

		status = connector_status_unknown;

	drm_modeset_drop_locks(&ctx);

	drm_modeset_acquire_fini(&ctx);

out:

	intel_display_power_put(dev_priv, power_domain);

	return status;

}

static void intel_crt_destroy(struct drm_connector *connector)

{

	drm_connector_cleanup(connector);

	kfree(connector);

}

static int intel_crt_get_modes(struct drm_connector *connector)

{

	struct drm_device *dev = connector->dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_crt *crt = intel_attached_crt(connector);

	struct intel_encoder *intel_encoder = &crt->base;

	enum intel_display_power_domain power_domain;

	int ret;

	struct i2c_adapter *i2c;

	power_domain = intel_display_port_power_domain(intel_encoder);

	intel_display_power_get(dev_priv, power_domain);

	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);

	ret = intel_crt_ddc_get_modes(connector, i2c);

	if (ret || !IS_G4X(dev))

		goto out;

	/* Try to probe digital port for output in DVI-I -> VGA mode. */

	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB);

	ret = intel_crt_ddc_get_modes(connector, i2c);

out:

	intel_display_power_put(dev_priv, power_domain);

	return ret;

}

static int intel_crt_set_property(struct drm_connector *connector,

				  struct drm_property *property,

				  uint64_t value)

{

	return 0;

}

static void intel_crt_reset(struct drm_connector *connector)

{

	struct drm_device *dev = connector->dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_crt *crt = intel_attached_crt(connector);

	if (INTEL_INFO(dev)->gen >= 5) {

		u32 adpa;

		adpa = I915_READ(crt->adpa_reg);

		adpa &= ~ADPA_CRT_HOTPLUG_MASK;

		adpa |= ADPA_HOTPLUG_BITS;

		I915_WRITE(crt->adpa_reg, adpa);

		POSTING_READ(crt->adpa_reg);

		DRM_DEBUG_KMS("crt adpa set to 0x%x\n", adpa);

		crt->force_hotplug_required = 1;

	}

}

/*

 * Routines for controlling stuff on the analog port

 */

static const struct drm_connector_funcs intel_crt_connector_funcs = {

	.reset = intel_crt_reset,

	.dpms = drm_atomic_helper_connector_dpms,

	.detect = intel_crt_detect,

	.fill_modes = drm_helper_probe_single_connector_modes,

	.destroy = intel_crt_destroy,

	.set_property = intel_crt_set_property,

	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,

	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,

	.atomic_get_property = intel_connector_atomic_get_property,

};

static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {

	.mode_valid = intel_crt_mode_valid,

	.get_modes = intel_crt_get_modes,

	.best_encoder = intel_best_encoder,

};

static const struct drm_encoder_funcs intel_crt_enc_funcs = {

	.destroy = intel_encoder_destroy,

};

static int intel_no_crt_dmi_callback(const struct dmi_system_id *id)

{

	DRM_INFO("Skipping CRT initialization for %s\n", id->ident);

	return 1;

}

static const struct dmi_system_id intel_no_crt[] = {

	{

		.callback = intel_no_crt_dmi_callback,

		.ident = "ACER ZGB",

		.matches = {

			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),

			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),

		},

	},

	{

		.callback = intel_no_crt_dmi_callback,

		.ident = "DELL XPS 8700",

		.matches = {

			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),

			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 8700"),

		},

	},

	{ }

};

void intel_crt_init(struct drm_device *dev)

{

	struct drm_connector *connector;

	struct intel_crt *crt;

	struct intel_connector *intel_connector;

	struct drm_i915_private *dev_priv = dev->dev_private;

	/* Skip machines without VGA that falsely report hotplug events */

	if (dmi_check_system(intel_no_crt))

		return;

	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);

	if (!crt)

		return;

	intel_connector = intel_connector_alloc();

	if (!intel_connector) {

		kfree(crt);

		return;

	}

	connector = &intel_connector->base;

	crt->connector = intel_connector;

	drm_connector_init(dev, &intel_connector->base,

			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);

	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,

			 DRM_MODE_ENCODER_DAC);

	intel_connector_attach_encoder(intel_connector, &crt->base);

	crt->base.type = INTEL_OUTPUT_ANALOG;

	crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);

	if (IS_I830(dev))

		crt->base.crtc_mask = (1 << 0);

	else

		crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);

	if (IS_GEN2(dev))

		connector->interlace_allowed = 0;

	else

		connector->interlace_allowed = 1;

	connector->doublescan_allowed = 0;

	if (HAS_PCH_SPLIT(dev))

		crt->adpa_reg = PCH_ADPA;

	else if (IS_VALLEYVIEW(dev))

		crt->adpa_reg = VLV_ADPA;

	else

		crt->adpa_reg = ADPA;

	crt->base.compute_config = intel_crt_compute_config;

	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev)) {

		crt->base.disable = pch_disable_crt;

		crt->base.post_disable = pch_post_disable_crt;

	} else {

		crt->base.disable = intel_disable_crt;

	}

	crt->base.enable = intel_enable_crt;

	if (I915_HAS_HOTPLUG(dev))

		crt->base.hpd_pin = HPD_CRT;

	if (HAS_DDI(dev)) {

		crt->base.get_config = hsw_crt_get_config;

		crt->base.get_hw_state = intel_ddi_get_hw_state;

	} else {

		crt->base.get_config = intel_crt_get_config;

		crt->base.get_hw_state = intel_crt_get_hw_state;

	}

	intel_connector->get_hw_state = intel_connector_get_hw_state;

	intel_connector->unregister = intel_connector_unregister;

	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);

	drm_connector_register(connector);

	if (!I915_HAS_HOTPLUG(dev))

		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;

	/*

	 * Configure the automatic hotplug detection stuff

	 */

	crt->force_hotplug_required = 0;

	/*

	 * TODO: find a proper way to discover whether we need to set the the

	 * polarity and link reversal bits or not, instead of relying on the

	 * BIOS.

	 */

	if (HAS_PCH_LPT(dev)) {

		u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |

				 FDI_RX_LINK_REVERSAL_OVERRIDE;

		dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;

	}

	intel_crt_reset(connector);

}