Subversion Repositories Kolibri OS

/*

 * Copyright © 1997-2003 by The XFree86 Project, Inc.

 * Copyright © 2007 Dave Airlie

 * Copyright © 2007-2008 Intel Corporation

 *   Jesse Barnes 

 * Copyright 2005-2006 Luc Verhaegen

 * Copyright (c) 2001, Andy Ritger  aritger@nvidia.com

 *

 * Permission is hereby granted, free of charge, to any person obtaining a

 * copy of this software and associated documentation files (the "Software"),

 * to deal in the Software without restriction, including without limitation

 * the rights to use, copy, modify, merge, publish, distribute, sublicense,

 * and/or sell copies of the Software, and to permit persons to whom the

 * Software is furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR

 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 * OTHER DEALINGS IN THE SOFTWARE.

 *

 * Except as contained in this notice, the name of the copyright holder(s)

 * and author(s) shall not be used in advertising or otherwise to promote

 * the sale, use or other dealings in this Software without prior written

 * authorization from the copyright holder(s) and author(s).

 */

#include 

#include 

#include 

#include 

#include 

#include 

#include 

#include 

#include "drm_crtc_internal.h"

/**

 * drm_mode_debug_printmodeline - print a mode to dmesg

 * @mode: mode to print

 *

 * Describe @mode using DRM_DEBUG.

 */

void drm_mode_debug_printmodeline(const struct drm_display_mode *mode)

{

	DRM_DEBUG_KMS("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d "

			"0x%x 0x%x\n",

		mode->base.id, mode->name, mode->vrefresh, mode->clock,

		mode->hdisplay, mode->hsync_start,

		mode->hsync_end, mode->htotal,

		mode->vdisplay, mode->vsync_start,

		mode->vsync_end, mode->vtotal, mode->type, mode->flags);

}

EXPORT_SYMBOL(drm_mode_debug_printmodeline);

/**

 * drm_mode_create - create a new display mode

 * @dev: DRM device

 *

 * Create a new, cleared drm_display_mode with kzalloc, allocate an ID for it

 * and return it.

 *

 * Returns:

 * Pointer to new mode on success, NULL on error.

 */

struct drm_display_mode *drm_mode_create(struct drm_device *dev)

{

	struct drm_display_mode *nmode;

	nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL);

	if (!nmode)

		return NULL;

	if (drm_mode_object_get(dev, &nmode->base, DRM_MODE_OBJECT_MODE)) {

		kfree(nmode);

		return NULL;

	}

	return nmode;

}

EXPORT_SYMBOL(drm_mode_create);

/**

 * drm_mode_destroy - remove a mode

 * @dev: DRM device

 * @mode: mode to remove

 *

 * Release @mode's unique ID, then free it @mode structure itself using kfree.

 */

void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode)

{

	if (!mode)

		return;

	drm_mode_object_put(dev, &mode->base);

	kfree(mode);

}

EXPORT_SYMBOL(drm_mode_destroy);

/**

 * drm_mode_probed_add - add a mode to a connector's probed_mode list

 * @connector: connector the new mode

 * @mode: mode data

 *

 * Add @mode to @connector's probed_mode list for later use. This list should

 * then in a second step get filtered and all the modes actually supported by

 * the hardware moved to the @connector's modes list.

 */

void drm_mode_probed_add(struct drm_connector *connector,

			 struct drm_display_mode *mode)

{

	WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex));

	list_add_tail(&mode->head, &connector->probed_modes);

}

EXPORT_SYMBOL(drm_mode_probed_add);

/**

 * drm_cvt_mode -create a modeline based on the CVT algorithm

 * @dev: drm device

 * @hdisplay: hdisplay size

 * @vdisplay: vdisplay size

 * @vrefresh: vrefresh rate

 * @reduced: whether to use reduced blanking

 * @interlaced: whether to compute an interlaced mode

 * @margins: whether to add margins (borders)

 *

 * This function is called to generate the modeline based on CVT algorithm

 * according to the hdisplay, vdisplay, vrefresh.

 * It is based from the VESA(TM) Coordinated Video Timing Generator by

 * Graham Loveridge April 9, 2003 available at

 * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls

 *

 * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.

 * What I have done is to translate it by using integer calculation.

 *

 * Returns:

 * The modeline based on the CVT algorithm stored in a drm_display_mode object.

 * The display mode object is allocated with drm_mode_create(). Returns NULL

 * when no mode could be allocated.

 */

struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,

				      int vdisplay, int vrefresh,

				      bool reduced, bool interlaced, bool margins)

{

#define HV_FACTOR			1000

	/* 1) top/bottom margin size (% of height) - default: 1.8, */

#define	CVT_MARGIN_PERCENTAGE		18

	/* 2) character cell horizontal granularity (pixels) - default 8 */

#define	CVT_H_GRANULARITY		8

	/* 3) Minimum vertical porch (lines) - default 3 */

#define	CVT_MIN_V_PORCH			3

	/* 4) Minimum number of vertical back porch lines - default 6 */

#define	CVT_MIN_V_BPORCH		6

	/* Pixel Clock step (kHz) */

#define CVT_CLOCK_STEP			250

	struct drm_display_mode *drm_mode;

	unsigned int vfieldrate, hperiod;

	int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync;

	int interlace;

	/* allocate the drm_display_mode structure. If failure, we will

	 * return directly

	 */

	drm_mode = drm_mode_create(dev);

	if (!drm_mode)

		return NULL;

	/* the CVT default refresh rate is 60Hz */

	if (!vrefresh)

		vrefresh = 60;

	/* the required field fresh rate */

	if (interlaced)

		vfieldrate = vrefresh * 2;

	else

		vfieldrate = vrefresh;

	/* horizontal pixels */

	hdisplay_rnd = hdisplay - (hdisplay % CVT_H_GRANULARITY);

	/* determine the left&right borders */

	hmargin = 0;

	if (margins) {

		hmargin = hdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000;

		hmargin -= hmargin % CVT_H_GRANULARITY;

	}

	/* find the total active pixels */

	drm_mode->hdisplay = hdisplay_rnd + 2 * hmargin;

	/* find the number of lines per field */

	if (interlaced)

		vdisplay_rnd = vdisplay / 2;

	else

		vdisplay_rnd = vdisplay;

	/* find the top & bottom borders */

	vmargin = 0;

	if (margins)

		vmargin = vdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000;

	drm_mode->vdisplay = vdisplay + 2 * vmargin;

	/* Interlaced */

	if (interlaced)

		interlace = 1;

	else

		interlace = 0;

	/* Determine VSync Width from aspect ratio */

	if (!(vdisplay % 3) && ((vdisplay * 4 / 3) == hdisplay))

		vsync = 4;

	else if (!(vdisplay % 9) && ((vdisplay * 16 / 9) == hdisplay))

		vsync = 5;

	else if (!(vdisplay % 10) && ((vdisplay * 16 / 10) == hdisplay))

		vsync = 6;

	else if (!(vdisplay % 4) && ((vdisplay * 5 / 4) == hdisplay))

		vsync = 7;

	else if (!(vdisplay % 9) && ((vdisplay * 15 / 9) == hdisplay))

		vsync = 7;

	else /* custom */

		vsync = 10;

	if (!reduced) {

		/* simplify the GTF calculation */

		/* 4) Minimum time of vertical sync + back porch interval (µs)

		 * default 550.0

		 */

		int tmp1, tmp2;

#define CVT_MIN_VSYNC_BP	550

		/* 3) Nominal HSync width (% of line period) - default 8 */

#define CVT_HSYNC_PERCENTAGE	8

		unsigned int hblank_percentage;

		int vsyncandback_porch, vback_porch, hblank;

		/* estimated the horizontal period */

		tmp1 = HV_FACTOR * 1000000  -

				CVT_MIN_VSYNC_BP * HV_FACTOR * vfieldrate;

		tmp2 = (vdisplay_rnd + 2 * vmargin + CVT_MIN_V_PORCH) * 2 +

				interlace;

		hperiod = tmp1 * 2 / (tmp2 * vfieldrate);

		tmp1 = CVT_MIN_VSYNC_BP * HV_FACTOR / hperiod + 1;

		/* 9. Find number of lines in sync + backporch */

		if (tmp1 < (vsync + CVT_MIN_V_PORCH))

			vsyncandback_porch = vsync + CVT_MIN_V_PORCH;

		else

			vsyncandback_porch = tmp1;

		/* 10. Find number of lines in back porch */

		vback_porch = vsyncandback_porch - vsync;

		drm_mode->vtotal = vdisplay_rnd + 2 * vmargin +

				vsyncandback_porch + CVT_MIN_V_PORCH;

		/* 5) Definition of Horizontal blanking time limitation */

		/* Gradient (%/kHz) - default 600 */

#define CVT_M_FACTOR	600

		/* Offset (%) - default 40 */

#define CVT_C_FACTOR	40

		/* Blanking time scaling factor - default 128 */

#define CVT_K_FACTOR	128

		/* Scaling factor weighting - default 20 */

#define CVT_J_FACTOR	20

#define CVT_M_PRIME	(CVT_M_FACTOR * CVT_K_FACTOR / 256)

#define CVT_C_PRIME	((CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \

			 CVT_J_FACTOR)

		/* 12. Find ideal blanking duty cycle from formula */

		hblank_percentage = CVT_C_PRIME * HV_FACTOR - CVT_M_PRIME *

					hperiod / 1000;

		/* 13. Blanking time */

		if (hblank_percentage < 20 * HV_FACTOR)

			hblank_percentage = 20 * HV_FACTOR;

		hblank = drm_mode->hdisplay * hblank_percentage /

			 (100 * HV_FACTOR - hblank_percentage);

		hblank -= hblank % (2 * CVT_H_GRANULARITY);

		/* 14. find the total pixels per line */

		drm_mode->htotal = drm_mode->hdisplay + hblank;

		drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2;

		drm_mode->hsync_start = drm_mode->hsync_end -

			(drm_mode->htotal * CVT_HSYNC_PERCENTAGE) / 100;

		drm_mode->hsync_start += CVT_H_GRANULARITY -

			drm_mode->hsync_start % CVT_H_GRANULARITY;

		/* fill the Vsync values */

		drm_mode->vsync_start = drm_mode->vdisplay + CVT_MIN_V_PORCH;

		drm_mode->vsync_end = drm_mode->vsync_start + vsync;

	} else {

		/* Reduced blanking */

		/* Minimum vertical blanking interval time (µs)- default 460 */

#define CVT_RB_MIN_VBLANK	460

		/* Fixed number of clocks for horizontal sync */

#define CVT_RB_H_SYNC		32

		/* Fixed number of clocks for horizontal blanking */

#define CVT_RB_H_BLANK		160

		/* Fixed number of lines for vertical front porch - default 3*/

#define CVT_RB_VFPORCH		3

		int vbilines;

		int tmp1, tmp2;

		/* 8. Estimate Horizontal period. */

		tmp1 = HV_FACTOR * 1000000 -

			CVT_RB_MIN_VBLANK * HV_FACTOR * vfieldrate;

		tmp2 = vdisplay_rnd + 2 * vmargin;

		hperiod = tmp1 / (tmp2 * vfieldrate);

		/* 9. Find number of lines in vertical blanking */

		vbilines = CVT_RB_MIN_VBLANK * HV_FACTOR / hperiod + 1;

		/* 10. Check if vertical blanking is sufficient */

		if (vbilines < (CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH))

			vbilines = CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH;

		/* 11. Find total number of lines in vertical field */

		drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vbilines;

		/* 12. Find total number of pixels in a line */

		drm_mode->htotal = drm_mode->hdisplay + CVT_RB_H_BLANK;

		/* Fill in HSync values */

		drm_mode->hsync_end = drm_mode->hdisplay + CVT_RB_H_BLANK / 2;

		drm_mode->hsync_start = drm_mode->hsync_end - CVT_RB_H_SYNC;

		/* Fill in VSync values */

		drm_mode->vsync_start = drm_mode->vdisplay + CVT_RB_VFPORCH;

		drm_mode->vsync_end = drm_mode->vsync_start + vsync;

	}

	/* 15/13. Find pixel clock frequency (kHz for xf86) */

	drm_mode->clock = drm_mode->htotal * HV_FACTOR * 1000 / hperiod;

	drm_mode->clock -= drm_mode->clock % CVT_CLOCK_STEP;

	/* 18/16. Find actual vertical frame frequency */

	/* ignore - just set the mode flag for interlaced */

	if (interlaced) {

		drm_mode->vtotal *= 2;

		drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;

	}

	/* Fill the mode line name */

	drm_mode_set_name(drm_mode);

	if (reduced)

		drm_mode->flags |= (DRM_MODE_FLAG_PHSYNC |

					DRM_MODE_FLAG_NVSYNC);

	else

		drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC |

					DRM_MODE_FLAG_NHSYNC);

	return drm_mode;

}

EXPORT_SYMBOL(drm_cvt_mode);

/**

 * drm_gtf_mode_complex - create the modeline based on the full GTF algorithm

 * @dev: drm device

 * @hdisplay: hdisplay size

 * @vdisplay: vdisplay size

 * @vrefresh: vrefresh rate.

 * @interlaced: whether to compute an interlaced mode

 * @margins: desired margin (borders) size

 * @GTF_M: extended GTF formula parameters

 * @GTF_2C: extended GTF formula parameters

 * @GTF_K: extended GTF formula parameters

 * @GTF_2J: extended GTF formula parameters

 *

 * GTF feature blocks specify C and J in multiples of 0.5, so we pass them

 * in here multiplied by two.  For a C of 40, pass in 80.

 *

 * Returns:

 * The modeline based on the full GTF algorithm stored in a drm_display_mode object.

 * The display mode object is allocated with drm_mode_create(). Returns NULL

 * when no mode could be allocated.

 */

struct drm_display_mode *

drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay,

		     int vrefresh, bool interlaced, int margins,

		     int GTF_M, int GTF_2C, int GTF_K, int GTF_2J)

{	/* 1) top/bottom margin size (% of height) - default: 1.8, */

#define	GTF_MARGIN_PERCENTAGE		18

	/* 2) character cell horizontal granularity (pixels) - default 8 */

#define	GTF_CELL_GRAN			8

	/* 3) Minimum vertical porch (lines) - default 3 */

#define	GTF_MIN_V_PORCH			1

	/* width of vsync in lines */

#define V_SYNC_RQD			3

	/* width of hsync as % of total line */

#define H_SYNC_PERCENT			8

	/* min time of vsync + back porch (microsec) */

#define MIN_VSYNC_PLUS_BP		550

	/* C' and M' are part of the Blanking Duty Cycle computation */

#define GTF_C_PRIME	((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2)

#define GTF_M_PRIME	(GTF_K * GTF_M / 256)

	struct drm_display_mode *drm_mode;

	unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd;

	int top_margin, bottom_margin;

	int interlace;

	unsigned int hfreq_est;

	int vsync_plus_bp, vback_porch;

	unsigned int vtotal_lines, vfieldrate_est, hperiod;

	unsigned int vfield_rate, vframe_rate;

	int left_margin, right_margin;

	unsigned int total_active_pixels, ideal_duty_cycle;

	unsigned int hblank, total_pixels, pixel_freq;

	int hsync, hfront_porch, vodd_front_porch_lines;

	unsigned int tmp1, tmp2;

	drm_mode = drm_mode_create(dev);

	if (!drm_mode)

		return NULL;

	/* 1. In order to give correct results, the number of horizontal

	 * pixels requested is first processed to ensure that it is divisible

	 * by the character size, by rounding it to the nearest character

	 * cell boundary:

	 */

	hdisplay_rnd = (hdisplay + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN;

	hdisplay_rnd = hdisplay_rnd * GTF_CELL_GRAN;

	/* 2. If interlace is requested, the number of vertical lines assumed

	 * by the calculation must be halved, as the computation calculates

	 * the number of vertical lines per field.

	 */

	if (interlaced)

		vdisplay_rnd = vdisplay / 2;

	else

		vdisplay_rnd = vdisplay;

	/* 3. Find the frame rate required: */

	if (interlaced)

		vfieldrate_rqd = vrefresh * 2;

	else

		vfieldrate_rqd = vrefresh;

	/* 4. Find number of lines in Top margin: */

	top_margin = 0;

	if (margins)

		top_margin = (vdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) /

				1000;

	/* 5. Find number of lines in bottom margin: */

	bottom_margin = top_margin;

	/* 6. If interlace is required, then set variable interlace: */

	if (interlaced)

		interlace = 1;

	else

		interlace = 0;

	/* 7. Estimate the Horizontal frequency */

	{

		tmp1 = (1000000  - MIN_VSYNC_PLUS_BP * vfieldrate_rqd) / 500;

		tmp2 = (vdisplay_rnd + 2 * top_margin + GTF_MIN_V_PORCH) *

				2 + interlace;

		hfreq_est = (tmp2 * 1000 * vfieldrate_rqd) / tmp1;

	}

	/* 8. Find the number of lines in V sync + back porch */

	/* [V SYNC+BP] = RINT(([MIN VSYNC+BP] * hfreq_est / 1000000)) */

	vsync_plus_bp = MIN_VSYNC_PLUS_BP * hfreq_est / 1000;

	vsync_plus_bp = (vsync_plus_bp + 500) / 1000;

	/*  9. Find the number of lines in V back porch alone: */

	vback_porch = vsync_plus_bp - V_SYNC_RQD;

	/*  10. Find the total number of lines in Vertical field period: */

	vtotal_lines = vdisplay_rnd + top_margin + bottom_margin +

			vsync_plus_bp + GTF_MIN_V_PORCH;

	/*  11. Estimate the Vertical field frequency: */

	vfieldrate_est = hfreq_est / vtotal_lines;

	/*  12. Find the actual horizontal period: */

	hperiod = 1000000 / (vfieldrate_rqd * vtotal_lines);

	/*  13. Find the actual Vertical field frequency: */

	vfield_rate = hfreq_est / vtotal_lines;

	/*  14. Find the Vertical frame frequency: */

	if (interlaced)

		vframe_rate = vfield_rate / 2;

	else

		vframe_rate = vfield_rate;

	/*  15. Find number of pixels in left margin: */

	if (margins)

		left_margin = (hdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) /

				1000;

	else

		left_margin = 0;

	/* 16.Find number of pixels in right margin: */

	right_margin = left_margin;

	/* 17.Find total number of active pixels in image and left and right */

	total_active_pixels = hdisplay_rnd + left_margin + right_margin;

	/* 18.Find the ideal blanking duty cycle from blanking duty cycle */

	ideal_duty_cycle = GTF_C_PRIME * 1000 -

				(GTF_M_PRIME * 1000000 / hfreq_est);

	/* 19.Find the number of pixels in the blanking time to the nearest

	 * double character cell: */

	hblank = total_active_pixels * ideal_duty_cycle /

			(100000 - ideal_duty_cycle);

	hblank = (hblank + GTF_CELL_GRAN) / (2 * GTF_CELL_GRAN);

	hblank = hblank * 2 * GTF_CELL_GRAN;

	/* 20.Find total number of pixels: */

	total_pixels = total_active_pixels + hblank;

	/* 21.Find pixel clock frequency: */

	pixel_freq = total_pixels * hfreq_est / 1000;

	/* Stage 1 computations are now complete; I should really pass

	 * the results to another function and do the Stage 2 computations,

	 * but I only need a few more values so I'll just append the

	 * computations here for now */

	/* 17. Find the number of pixels in the horizontal sync period: */

	hsync = H_SYNC_PERCENT * total_pixels / 100;

	hsync = (hsync + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN;

	hsync = hsync * GTF_CELL_GRAN;

	/* 18. Find the number of pixels in horizontal front porch period */

	hfront_porch = hblank / 2 - hsync;

	/*  36. Find the number of lines in the odd front porch period: */

	vodd_front_porch_lines = GTF_MIN_V_PORCH ;

	/* finally, pack the results in the mode struct */

	drm_mode->hdisplay = hdisplay_rnd;

	drm_mode->hsync_start = hdisplay_rnd + hfront_porch;

	drm_mode->hsync_end = drm_mode->hsync_start + hsync;

	drm_mode->htotal = total_pixels;

	drm_mode->vdisplay = vdisplay_rnd;

	drm_mode->vsync_start = vdisplay_rnd + vodd_front_porch_lines;

	drm_mode->vsync_end = drm_mode->vsync_start + V_SYNC_RQD;

	drm_mode->vtotal = vtotal_lines;

	drm_mode->clock = pixel_freq;

	if (interlaced) {

		drm_mode->vtotal *= 2;

		drm_mode->flags |= DRM_MODE_FLAG_INTERLACE;

	}

	drm_mode_set_name(drm_mode);

	if (GTF_M == 600 && GTF_2C == 80 && GTF_K == 128 && GTF_2J == 40)

		drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC;

	else

		drm_mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC;

	return drm_mode;

}

EXPORT_SYMBOL(drm_gtf_mode_complex);

/**

 * drm_gtf_mode - create the modeline based on the GTF algorithm

 * @dev: drm device

 * @hdisplay: hdisplay size

 * @vdisplay: vdisplay size

 * @vrefresh: vrefresh rate.

 * @interlaced: whether to compute an interlaced mode

 * @margins: desired margin (borders) size

 *

 * return the modeline based on GTF algorithm

 *

 * This function is to create the modeline based on the GTF algorithm.

 * Generalized Timing Formula is derived from:

 *	GTF Spreadsheet by Andy Morrish (1/5/97)

 *	available at http://www.vesa.org

 *

 * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.

 * What I have done is to translate it by using integer calculation.

 * I also refer to the function of fb_get_mode in the file of

 * drivers/video/fbmon.c

 *

 * Standard GTF parameters:

 * M = 600

 * C = 40

 * K = 128

 * J = 20

 *

 * Returns:

 * The modeline based on the GTF algorithm stored in a drm_display_mode object.

 * The display mode object is allocated with drm_mode_create(). Returns NULL

 * when no mode could be allocated.

 */

struct drm_display_mode *

drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,

	     bool interlaced, int margins)

{

	return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh,

				    interlaced, margins,

				    600, 40 * 2, 128, 20 * 2);

}

EXPORT_SYMBOL(drm_gtf_mode);

#ifdef CONFIG_VIDEOMODE_HELPERS

/**

 * drm_display_mode_from_videomode - fill in @dmode using @vm,

 * @vm: videomode structure to use as source

 * @dmode: drm_display_mode structure to use as destination

 *

 * Fills out @dmode using the display mode specified in @vm.

 */

void drm_display_mode_from_videomode(const struct videomode *vm,

				     struct drm_display_mode *dmode)

{

	dmode->hdisplay = vm->hactive;

	dmode->hsync_start = dmode->hdisplay + vm->hfront_porch;

	dmode->hsync_end = dmode->hsync_start + vm->hsync_len;

	dmode->htotal = dmode->hsync_end + vm->hback_porch;

	dmode->vdisplay = vm->vactive;

	dmode->vsync_start = dmode->vdisplay + vm->vfront_porch;

	dmode->vsync_end = dmode->vsync_start + vm->vsync_len;

	dmode->vtotal = dmode->vsync_end + vm->vback_porch;

	dmode->clock = vm->pixelclock / 1000;

	dmode->flags = 0;

	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)

		dmode->flags |= DRM_MODE_FLAG_PHSYNC;

	else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW)

		dmode->flags |= DRM_MODE_FLAG_NHSYNC;

	if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)

		dmode->flags |= DRM_MODE_FLAG_PVSYNC;

	else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW)

		dmode->flags |= DRM_MODE_FLAG_NVSYNC;

	if (vm->flags & DISPLAY_FLAGS_INTERLACED)

		dmode->flags |= DRM_MODE_FLAG_INTERLACE;

	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)

		dmode->flags |= DRM_MODE_FLAG_DBLSCAN;

	if (vm->flags & DISPLAY_FLAGS_DOUBLECLK)

		dmode->flags |= DRM_MODE_FLAG_DBLCLK;

	drm_mode_set_name(dmode);

}

EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode);

/**

 * drm_display_mode_to_videomode - fill in @vm using @dmode,

 * @dmode: drm_display_mode structure to use as source

 * @vm: videomode structure to use as destination

 *

 * Fills out @vm using the display mode specified in @dmode.

 */

void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,

				   struct videomode *vm)

{

	vm->hactive = dmode->hdisplay;

	vm->hfront_porch = dmode->hsync_start - dmode->hdisplay;

	vm->hsync_len = dmode->hsync_end - dmode->hsync_start;

	vm->hback_porch = dmode->htotal - dmode->hsync_end;

	vm->vactive = dmode->vdisplay;

	vm->vfront_porch = dmode->vsync_start - dmode->vdisplay;

	vm->vsync_len = dmode->vsync_end - dmode->vsync_start;

	vm->vback_porch = dmode->vtotal - dmode->vsync_end;

	vm->pixelclock = dmode->clock * 1000;

	vm->flags = 0;

	if (dmode->flags & DRM_MODE_FLAG_PHSYNC)

		vm->flags |= DISPLAY_FLAGS_HSYNC_HIGH;

	else if (dmode->flags & DRM_MODE_FLAG_NHSYNC)

		vm->flags |= DISPLAY_FLAGS_HSYNC_LOW;

	if (dmode->flags & DRM_MODE_FLAG_PVSYNC)

		vm->flags |= DISPLAY_FLAGS_VSYNC_HIGH;

	else if (dmode->flags & DRM_MODE_FLAG_NVSYNC)

		vm->flags |= DISPLAY_FLAGS_VSYNC_LOW;

	if (dmode->flags & DRM_MODE_FLAG_INTERLACE)

		vm->flags |= DISPLAY_FLAGS_INTERLACED;

	if (dmode->flags & DRM_MODE_FLAG_DBLSCAN)

		vm->flags |= DISPLAY_FLAGS_DOUBLESCAN;

	if (dmode->flags & DRM_MODE_FLAG_DBLCLK)

		vm->flags |= DISPLAY_FLAGS_DOUBLECLK;

}

EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode);

#ifdef CONFIG_OF

/**

 * of_get_drm_display_mode - get a drm_display_mode from devicetree

 * @np: device_node with the timing specification

 * @dmode: will be set to the return value

 * @index: index into the list of display timings in devicetree

 *

 * This function is expensive and should only be used, if only one mode is to be

 * read from DT. To get multiple modes start with of_get_display_timings and

 * work with that instead.

 *

 * Returns:

 * 0 on success, a negative errno code when no of videomode node was found.

 */

int of_get_drm_display_mode(struct device_node *np,

			    struct drm_display_mode *dmode, int index)

{

	struct videomode vm;

	int ret;

	ret = of_get_videomode(np, &vm, index);

	if (ret)

		return ret;

	drm_display_mode_from_videomode(&vm, dmode);

	pr_debug("%s: got %dx%d display mode from %s\n",

		of_node_full_name(np), vm.hactive, vm.vactive, np->name);

	drm_mode_debug_printmodeline(dmode);

	return 0;

}

EXPORT_SYMBOL_GPL(of_get_drm_display_mode);

#endif /* CONFIG_OF */

#endif /* CONFIG_VIDEOMODE_HELPERS */

/**

 * drm_mode_set_name - set the name on a mode

 * @mode: name will be set in this mode

 *

 * Set the name of @mode to a standard format which is x

 * with an optional 'i' suffix for interlaced modes.

 */

void drm_mode_set_name(struct drm_display_mode *mode)

{

	bool interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);

	snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d%s",

		 mode->hdisplay, mode->vdisplay,

		 interlaced ? "i" : "");

}

EXPORT_SYMBOL(drm_mode_set_name);

/** drm_mode_hsync - get the hsync of a mode

 * @mode: mode

 *

 * Returns:

 * @modes's hsync rate in kHz, rounded to the nearest integer. Calculates the

 * value first if it is not yet set.

 */

int drm_mode_hsync(const struct drm_display_mode *mode)

{

	unsigned int calc_val;

	if (mode->hsync)

		return mode->hsync;

	if (mode->htotal < 0)

		return 0;

	calc_val = (mode->clock * 1000) / mode->htotal; /* hsync in Hz */

	calc_val += 500;				/* round to 1000Hz */

	calc_val /= 1000;				/* truncate to kHz */

	return calc_val;

}

EXPORT_SYMBOL(drm_mode_hsync);

/**

 * drm_mode_vrefresh - get the vrefresh of a mode

 * @mode: mode

 *

 * Returns:

 * @modes's vrefresh rate in Hz, rounded to the nearest integer. Calculates the

 * value first if it is not yet set.

 */

int drm_mode_vrefresh(const struct drm_display_mode *mode)

{

	int refresh = 0;

	unsigned int calc_val;

	if (mode->vrefresh > 0)

		refresh = mode->vrefresh;

	else if (mode->htotal > 0 && mode->vtotal > 0) {

		int vtotal;

		vtotal = mode->vtotal;

		/* work out vrefresh the value will be x1000 */

		calc_val = (mode->clock * 1000);

		calc_val /= mode->htotal;

		refresh = (calc_val + vtotal / 2) / vtotal;

		if (mode->flags & DRM_MODE_FLAG_INTERLACE)

			refresh *= 2;

		if (mode->flags & DRM_MODE_FLAG_DBLSCAN)

			refresh /= 2;

		if (mode->vscan > 1)

			refresh /= mode->vscan;

	}

	return refresh;

}

EXPORT_SYMBOL(drm_mode_vrefresh);

/**

 * drm_mode_set_crtcinfo - set CRTC modesetting timing parameters

 * @p: mode

 * @adjust_flags: a combination of adjustment flags

 *

 * Setup the CRTC modesetting timing parameters for @p, adjusting if necessary.

 *

 * - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of

 *   interlaced modes.

 * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for

 *   buffers containing two eyes (only adjust the timings when needed, eg. for

 *   "frame packing" or "side by side full").

 * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not*

 *   be performed for doublescan and vscan > 1 modes respectively.

 */

void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)

{

	if ((p == NULL) || ((p->type & DRM_MODE_TYPE_CRTC_C) == DRM_MODE_TYPE_BUILTIN))

		return;

	p->crtc_clock = p->clock;

	p->crtc_hdisplay = p->hdisplay;

	p->crtc_hsync_start = p->hsync_start;

	p->crtc_hsync_end = p->hsync_end;

	p->crtc_htotal = p->htotal;

	p->crtc_hskew = p->hskew;

	p->crtc_vdisplay = p->vdisplay;

	p->crtc_vsync_start = p->vsync_start;

	p->crtc_vsync_end = p->vsync_end;

	p->crtc_vtotal = p->vtotal;

	if (p->flags & DRM_MODE_FLAG_INTERLACE) {

		if (adjust_flags & CRTC_INTERLACE_HALVE_V) {

			p->crtc_vdisplay /= 2;

			p->crtc_vsync_start /= 2;

			p->crtc_vsync_end /= 2;

			p->crtc_vtotal /= 2;

		}

	}

	if (!(adjust_flags & CRTC_NO_DBLSCAN)) {

		if (p->flags & DRM_MODE_FLAG_DBLSCAN) {

			p->crtc_vdisplay *= 2;

			p->crtc_vsync_start *= 2;

			p->crtc_vsync_end *= 2;

			p->crtc_vtotal *= 2;

		}

	}

	if (!(adjust_flags & CRTC_NO_VSCAN)) {

		if (p->vscan > 1) {

			p->crtc_vdisplay *= p->vscan;

			p->crtc_vsync_start *= p->vscan;

			p->crtc_vsync_end *= p->vscan;

			p->crtc_vtotal *= p->vscan;

		}

	}

	if (adjust_flags & CRTC_STEREO_DOUBLE) {

		unsigned int layout = p->flags & DRM_MODE_FLAG_3D_MASK;

		switch (layout) {

		case DRM_MODE_FLAG_3D_FRAME_PACKING:

			p->crtc_clock *= 2;

			p->crtc_vdisplay += p->crtc_vtotal;

			p->crtc_vsync_start += p->crtc_vtotal;

			p->crtc_vsync_end += p->crtc_vtotal;

			p->crtc_vtotal += p->crtc_vtotal;

			break;

		}

	}

	p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay);

	p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal);

	p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay);

	p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal);

}

EXPORT_SYMBOL(drm_mode_set_crtcinfo);

/**

 * drm_mode_copy - copy the mode

 * @dst: mode to overwrite

 * @src: mode to copy

 *

 * Copy an existing mode into another mode, preserving the object id and

 * list head of the destination mode.

 */

void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src)

{

	int id = dst->base.id;

	struct list_head head = dst->head;

	*dst = *src;

	dst->base.id = id;

	dst->head = head;

}

EXPORT_SYMBOL(drm_mode_copy);

/**

 * drm_mode_duplicate - allocate and duplicate an existing mode

 * @dev: drm_device to allocate the duplicated mode for

 * @mode: mode to duplicate

 *

 * Just allocate a new mode, copy the existing mode into it, and return

 * a pointer to it.  Used to create new instances of established modes.

 *

 * Returns:

 * Pointer to duplicated mode on success, NULL on error.

 */

struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,

					    const struct drm_display_mode *mode)

{

	struct drm_display_mode *nmode;

	nmode = drm_mode_create(dev);

	if (!nmode)

		return NULL;

	drm_mode_copy(nmode, mode);

	return nmode;

}

EXPORT_SYMBOL(drm_mode_duplicate);

/**

 * drm_mode_equal - test modes for equality

 * @mode1: first mode

 * @mode2: second mode

 *

 * Check to see if @mode1 and @mode2 are equivalent.

 *

 * Returns:

 * True if the modes are equal, false otherwise.

 */

bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2)

{

	if (!mode1 && !mode2)

		return true;

	if (!mode1 || !mode2)

		return false;

	/* do clock check convert to PICOS so fb modes get matched

	 * the same */

	if (mode1->clock && mode2->clock) {

		if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock))

			return false;

	} else if (mode1->clock != mode2->clock)

		return false;

	if ((mode1->flags & DRM_MODE_FLAG_3D_MASK) !=

	    (mode2->flags & DRM_MODE_FLAG_3D_MASK))

		return false;

	return drm_mode_equal_no_clocks_no_stereo(mode1, mode2);

}

EXPORT_SYMBOL(drm_mode_equal);

/**

 * drm_mode_equal_no_clocks_no_stereo - test modes for equality

 * @mode1: first mode

 * @mode2: second mode

 *

 * Check to see if @mode1 and @mode2 are equivalent, but

 * don't check the pixel clocks nor the stereo layout.

 *

 * Returns:

 * True if the modes are equal, false otherwise.

 */

bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,

					const struct drm_display_mode *mode2)

{

	if (mode1->hdisplay == mode2->hdisplay &&

	    mode1->hsync_start == mode2->hsync_start &&

	    mode1->hsync_end == mode2->hsync_end &&

	    mode1->htotal == mode2->htotal &&

	    mode1->hskew == mode2->hskew &&

	    mode1->vdisplay == mode2->vdisplay &&

	    mode1->vsync_start == mode2->vsync_start &&

	    mode1->vsync_end == mode2->vsync_end &&

	    mode1->vtotal == mode2->vtotal &&

	    mode1->vscan == mode2->vscan &&

	    (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) ==

	     (mode2->flags & ~DRM_MODE_FLAG_3D_MASK))

		return true;

	return false;

}

EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo);

/**

 * drm_mode_validate_basic - make sure the mode is somewhat sane

 * @mode: mode to check

 *

 * Check that the mode timings are at least somewhat reasonable.

 * Any hardware specific limits are left up for each driver to check.

 *

 * Returns:

 * The mode status

 */

enum drm_mode_status

drm_mode_validate_basic(const struct drm_display_mode *mode)

{

	if (mode->clock == 0)

		return MODE_CLOCK_LOW;

	if (mode->hdisplay == 0 ||

	    mode->hsync_start < mode->hdisplay ||

	    mode->hsync_end < mode->hsync_start ||

	    mode->htotal < mode->hsync_end)

		return MODE_H_ILLEGAL;

	if (mode->vdisplay == 0 ||

	    mode->vsync_start < mode->vdisplay ||

	    mode->vsync_end < mode->vsync_start ||

	    mode->vtotal < mode->vsync_end)

		return MODE_V_ILLEGAL;

	return MODE_OK;

}

EXPORT_SYMBOL(drm_mode_validate_basic);

/**

 * drm_mode_validate_size - make sure modes adhere to size constraints

 * @mode: mode to check

 * @maxX: maximum width

 * @maxY: maximum height

 *

 * This function is a helper which can be used to validate modes against size

 * limitations of the DRM device/connector. If a mode is too big its status

 * member is updated with the appropriate validation failure code. The list

 * itself is not changed.

 *

 * Returns:

 * The mode status

 */

enum drm_mode_status

drm_mode_validate_size(const struct drm_display_mode *mode,

		       int maxX, int maxY)

{

	if (maxX > 0 && mode->hdisplay > maxX)

		return MODE_VIRTUAL_X;

	if (maxY > 0 && mode->vdisplay > maxY)

		return MODE_VIRTUAL_Y;

	return MODE_OK;

}

EXPORT_SYMBOL(drm_mode_validate_size);

#define MODE_STATUS(status) [MODE_ ## status + 3] = #status

static const char * const drm_mode_status_names[] = {

	MODE_STATUS(OK),

	MODE_STATUS(HSYNC),

	MODE_STATUS(VSYNC),

	MODE_STATUS(H_ILLEGAL),

	MODE_STATUS(V_ILLEGAL),

	MODE_STATUS(BAD_WIDTH),

	MODE_STATUS(NOMODE),

	MODE_STATUS(NO_INTERLACE),

	MODE_STATUS(NO_DBLESCAN),

	MODE_STATUS(NO_VSCAN),

	MODE_STATUS(MEM),

	MODE_STATUS(VIRTUAL_X),

	MODE_STATUS(VIRTUAL_Y),

	MODE_STATUS(MEM_VIRT),

	MODE_STATUS(NOCLOCK),

	MODE_STATUS(CLOCK_HIGH),

	MODE_STATUS(CLOCK_LOW),

	MODE_STATUS(CLOCK_RANGE),

	MODE_STATUS(BAD_HVALUE),

	MODE_STATUS(BAD_VVALUE),

	MODE_STATUS(BAD_VSCAN),

	MODE_STATUS(HSYNC_NARROW),

	MODE_STATUS(HSYNC_WIDE),

	MODE_STATUS(HBLANK_NARROW),

	MODE_STATUS(HBLANK_WIDE),

	MODE_STATUS(VSYNC_NARROW),

	MODE_STATUS(VSYNC_WIDE),

	MODE_STATUS(VBLANK_NARROW),

	MODE_STATUS(VBLANK_WIDE),

	MODE_STATUS(PANEL),

	MODE_STATUS(INTERLACE_WIDTH),

	MODE_STATUS(ONE_WIDTH),

	MODE_STATUS(ONE_HEIGHT),

	MODE_STATUS(ONE_SIZE),

	MODE_STATUS(NO_REDUCED),

	MODE_STATUS(NO_STEREO),

	MODE_STATUS(UNVERIFIED),

	MODE_STATUS(BAD),

	MODE_STATUS(ERROR),

};

#undef MODE_STATUS

static const char *drm_get_mode_status_name(enum drm_mode_status status)

{

	int index = status + 3;

	if (WARN_ON(index < 0 || index >= ARRAY_SIZE(drm_mode_status_names)))

		return "";

	return drm_mode_status_names[index];

}

/**

 * drm_mode_prune_invalid - remove invalid modes from mode list

 * @dev: DRM device

 * @mode_list: list of modes to check

 * @verbose: be verbose about it

 *

 * This helper function can be used to prune a display mode list after

 * validation has been completed. All modes who's status is not MODE_OK will be

 * removed from the list, and if @verbose the status code and mode name is also

 * printed to dmesg.

 */

void drm_mode_prune_invalid(struct drm_device *dev,

			    struct list_head *mode_list, bool verbose)

{

	struct drm_display_mode *mode, *t;

	list_for_each_entry_safe(mode, t, mode_list, head) {

		if (mode->status != MODE_OK) {

			list_del(&mode->head);

			if (verbose) {

				drm_mode_debug_printmodeline(mode);

				DRM_DEBUG_KMS("Not using %s mode: %s\n",

					      mode->name,

					      drm_get_mode_status_name(mode->status));

			}

			drm_mode_destroy(dev, mode);