Subversion Repositories Kolibri OS

#ifndef _LINUX_RCULIST_H

#define _LINUX_RCULIST_H

#ifdef __KERNEL__

/*

 * RCU-protected list version

 */

#include 

#include 

/*

 * Why is there no list_empty_rcu()?  Because list_empty() serves this

 * purpose.  The list_empty() function fetches the RCU-protected pointer

 * and compares it to the address of the list head, but neither dereferences

 * this pointer itself nor provides this pointer to the caller.  Therefore,

 * it is not necessary to use rcu_dereference(), so that list_empty() can

 * be used anywhere you would want to use a list_empty_rcu().

 */

/*

 * INIT_LIST_HEAD_RCU - Initialize a list_head visible to RCU readers

 * @list: list to be initialized

 *

 * You should instead use INIT_LIST_HEAD() for normal initialization and

 * cleanup tasks, when readers have no access to the list being initialized.

 * However, if the list being initialized is visible to readers, you

 * need to keep the compiler from being too mischievous.

 */

static inline void INIT_LIST_HEAD_RCU(struct list_head *list)

{

	WRITE_ONCE(list->next, list);

	WRITE_ONCE(list->prev, list);

}

/*

 * return the ->next pointer of a list_head in an rcu safe

 * way, we must not access it directly

 */

#define list_next_rcu(list)	(*((struct list_head __rcu **)(&(list)->next)))

/*

 * Insert a new entry between two known consecutive entries.

 *

 * This is only for internal list manipulation where we know

 * the prev/next entries already!

 */

#ifndef CONFIG_DEBUG_LIST

static inline void __list_add_rcu(struct list_head *new,

		struct list_head *prev, struct list_head *next)

{

	new->next = next;

	new->prev = prev;

	rcu_assign_pointer(list_next_rcu(prev), new);

	next->prev = new;

}

#else

void __list_add_rcu(struct list_head *new,

		    struct list_head *prev, struct list_head *next);

#endif

/**

 * list_add_rcu - add a new entry to rcu-protected list

 * @new: new entry to be added

 * @head: list head to add it after

 *

 * Insert a new entry after the specified head.

 * This is good for implementing stacks.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as list_add_rcu()

 * or list_del_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * list_for_each_entry_rcu().

 */

static inline void list_add_rcu(struct list_head *new, struct list_head *head)

{

	__list_add_rcu(new, head, head->next);

}

/**

 * list_add_tail_rcu - add a new entry to rcu-protected list

 * @new: new entry to be added

 * @head: list head to add it before

 *

 * Insert a new entry before the specified head.

 * This is useful for implementing queues.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as list_add_tail_rcu()

 * or list_del_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * list_for_each_entry_rcu().

 */

static inline void list_add_tail_rcu(struct list_head *new,

					struct list_head *head)

{

	__list_add_rcu(new, head->prev, head);

}

/**

 * list_del_rcu - deletes entry from list without re-initialization

 * @entry: the element to delete from the list.

 *

 * Note: list_empty() on entry does not return true after this,

 * the entry is in an undefined state. It is useful for RCU based

 * lockfree traversal.

 *

 * In particular, it means that we can not poison the forward

 * pointers that may still be used for walking the list.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as list_del_rcu()

 * or list_add_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * list_for_each_entry_rcu().

 *

 * Note that the caller is not permitted to immediately free

 * the newly deleted entry.  Instead, either synchronize_rcu()

 * or call_rcu() must be used to defer freeing until an RCU

 * grace period has elapsed.

 */

static inline void list_del_rcu(struct list_head *entry)

{

	__list_del_entry(entry);

	entry->prev = LIST_POISON2;

}

/**

 * hlist_del_init_rcu - deletes entry from hash list with re-initialization

 * @n: the element to delete from the hash list.

 *

 * Note: list_unhashed() on the node return true after this. It is

 * useful for RCU based read lockfree traversal if the writer side

 * must know if the list entry is still hashed or already unhashed.

 *

 * In particular, it means that we can not poison the forward pointers

 * that may still be used for walking the hash list and we can only

 * zero the pprev pointer so list_unhashed() will return true after

 * this.

 *

 * The caller must take whatever precautions are necessary (such as

 * holding appropriate locks) to avoid racing with another

 * list-mutation primitive, such as hlist_add_head_rcu() or

 * hlist_del_rcu(), running on this same list.  However, it is

 * perfectly legal to run concurrently with the _rcu list-traversal

 * primitives, such as hlist_for_each_entry_rcu().

 */

static inline void hlist_del_init_rcu(struct hlist_node *n)

{

	if (!hlist_unhashed(n)) {

		__hlist_del(n);

		n->pprev = NULL;

	}

}

/**

 * list_replace_rcu - replace old entry by new one

 * @old : the element to be replaced

 * @new : the new element to insert

 *

 * The @old entry will be replaced with the @new entry atomically.

 * Note: @old should not be empty.

 */

static inline void list_replace_rcu(struct list_head *old,

				struct list_head *new)

{

	new->next = old->next;

	new->prev = old->prev;

	rcu_assign_pointer(list_next_rcu(new->prev), new);

	new->next->prev = new;

	old->prev = LIST_POISON2;

}

/**

 * __list_splice_init_rcu - join an RCU-protected list into an existing list.

 * @list:	the RCU-protected list to splice

 * @prev:	points to the last element of the existing list

 * @next:	points to the first element of the existing list

 * @sync:	function to sync: synchronize_rcu(), synchronize_sched(), ...

 *

 * The list pointed to by @prev and @next can be RCU-read traversed

 * concurrently with this function.

 *

 * Note that this function blocks.

 *

 * Important note: the caller must take whatever action is necessary to prevent

 * any other updates to the existing list.  In principle, it is possible to

 * modify the list as soon as sync() begins execution. If this sort of thing

 * becomes necessary, an alternative version based on call_rcu() could be

 * created.  But only if -really- needed -- there is no shortage of RCU API

 * members.

 */

static inline void __list_splice_init_rcu(struct list_head *list,

					  struct list_head *prev,

					  struct list_head *next,

					void (*sync)(void))

{

	struct list_head *first = list->next;

	struct list_head *last = list->prev;

	/*

	 * "first" and "last" tracking list, so initialize it.  RCU readers

	 * have access to this list, so we must use INIT_LIST_HEAD_RCU()

	 * instead of INIT_LIST_HEAD().

	 */

	INIT_LIST_HEAD_RCU(list);

	/*

	 * At this point, the list body still points to the source list.

	 * Wait for any readers to finish using the list before splicing

	 * the list body into the new list.  Any new readers will see

	 * an empty list.

	 */

	sync();

	/*

	 * Readers are finished with the source list, so perform splice.

	 * The order is important if the new list is global and accessible

	 * to concurrent RCU readers.  Note that RCU readers are not

	 * permitted to traverse the prev pointers without excluding

	 * this function.

	 */

	last->next = next;

	rcu_assign_pointer(list_next_rcu(prev), first);

	first->prev = prev;

	next->prev = last;

}

/**

 * list_splice_init_rcu - splice an RCU-protected list into an existing list,

 *                        designed for stacks.

 * @list:	the RCU-protected list to splice

 * @head:	the place in the existing list to splice the first list into

 * @sync:	function to sync: synchronize_rcu(), synchronize_sched(), ...

 */

static inline void list_splice_init_rcu(struct list_head *list,

					struct list_head *head,

					void (*sync)(void))

{

	if (!list_empty(list))

		__list_splice_init_rcu(list, head, head->next, sync);

}

/**

 * list_splice_tail_init_rcu - splice an RCU-protected list into an existing

 *                             list, designed for queues.

 * @list:	the RCU-protected list to splice

 * @head:	the place in the existing list to splice the first list into

 * @sync:	function to sync: synchronize_rcu(), synchronize_sched(), ...

 */

static inline void list_splice_tail_init_rcu(struct list_head *list,

					     struct list_head *head,

					     void (*sync)(void))

{

	if (!list_empty(list))

		__list_splice_init_rcu(list, head->prev, head, sync);

}

/**

 * list_entry_rcu - get the struct for this entry

 * @ptr:        the &struct list_head pointer.

 * @type:       the type of the struct this is embedded in.

 * @member:     the name of the list_head within the struct.

 *

 * This primitive may safely run concurrently with the _rcu list-mutation

 * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().

 */

#define list_entry_rcu(ptr, type, member) \

	container_of(lockless_dereference(ptr), type, member)

/**

 * Where are list_empty_rcu() and list_first_entry_rcu()?

 *

 * Implementing those functions following their counterparts list_empty() and

 * list_first_entry() is not advisable because they lead to subtle race

 * conditions as the following snippet shows:

 *

 * if (!list_empty_rcu(mylist)) {

 *	struct foo *bar = list_first_entry_rcu(mylist, struct foo, list_member);

 *	do_something(bar);

 * }

 *

 * The list may not be empty when list_empty_rcu checks it, but it may be when

 * list_first_entry_rcu rereads the ->next pointer.

 *

 * Rereading the ->next pointer is not a problem for list_empty() and

 * list_first_entry() because they would be protected by a lock that blocks

 * writers.

 *

 * See list_first_or_null_rcu for an alternative.

 */

/**

 * list_first_or_null_rcu - get the first element from a list

 * @ptr:        the list head to take the element from.

 * @type:       the type of the struct this is embedded in.

 * @member:     the name of the list_head within the struct.

 *

 * Note that if the list is empty, it returns NULL.

 *

 * This primitive may safely run concurrently with the _rcu list-mutation

 * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().

 */

#define list_first_or_null_rcu(ptr, type, member) \

({ \

	struct list_head *__ptr = (ptr); \

	struct list_head *__next = READ_ONCE(__ptr->next); \

	likely(__ptr != __next) ? list_entry_rcu(__next, type, member) : NULL; \

})

/**

 * list_for_each_entry_rcu	-	iterate over rcu list of given type

 * @pos:	the type * to use as a loop cursor.

 * @head:	the head for your list.

 * @member:	the name of the list_head within the struct.

 *

 * This list-traversal primitive may safely run concurrently with

 * the _rcu list-mutation primitives such as list_add_rcu()

 * as long as the traversal is guarded by rcu_read_lock().

 */

#define list_for_each_entry_rcu(pos, head, member) \

	for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \

		&pos->member != (head); \

		pos = list_entry_rcu(pos->member.next, typeof(*pos), member))

/**

 * list_entry_lockless - get the struct for this entry

 * @ptr:        the &struct list_head pointer.

 * @type:       the type of the struct this is embedded in.

 * @member:     the name of the list_head within the struct.

 *

 * This primitive may safely run concurrently with the _rcu list-mutation

 * primitives such as list_add_rcu(), but requires some implicit RCU

 * read-side guarding.  One example is running within a special

 * exception-time environment where preemption is disabled and where

 * lockdep cannot be invoked (in which case updaters must use RCU-sched,

 * as in synchronize_sched(), call_rcu_sched(), and friends).  Another

 * example is when items are added to the list, but never deleted.

 */

#define list_entry_lockless(ptr, type, member) \

	container_of((typeof(ptr))lockless_dereference(ptr), type, member)

/**

 * list_for_each_entry_lockless - iterate over rcu list of given type

 * @pos:	the type * to use as a loop cursor.

 * @head:	the head for your list.

 * @member:	the name of the list_struct within the struct.

 *

 * This primitive may safely run concurrently with the _rcu list-mutation

 * primitives such as list_add_rcu(), but requires some implicit RCU

 * read-side guarding.  One example is running within a special

 * exception-time environment where preemption is disabled and where

 * lockdep cannot be invoked (in which case updaters must use RCU-sched,

 * as in synchronize_sched(), call_rcu_sched(), and friends).  Another

 * example is when items are added to the list, but never deleted.

 */

#define list_for_each_entry_lockless(pos, head, member) \

	for (pos = list_entry_lockless((head)->next, typeof(*pos), member); \

	     &pos->member != (head); \

	     pos = list_entry_lockless(pos->member.next, typeof(*pos), member))

/**

 * list_for_each_entry_continue_rcu - continue iteration over list of given type

 * @pos:	the type * to use as a loop cursor.

 * @head:	the head for your list.

 * @member:	the name of the list_head within the struct.

 *

 * Continue to iterate over list of given type, continuing after

 * the current position.

 */

#define list_for_each_entry_continue_rcu(pos, head, member) 		\

	for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \

	     &pos->member != (head);	\

	     pos = list_entry_rcu(pos->member.next, typeof(*pos), member))

/**

 * hlist_del_rcu - deletes entry from hash list without re-initialization

 * @n: the element to delete from the hash list.

 *

 * Note: list_unhashed() on entry does not return true after this,

 * the entry is in an undefined state. It is useful for RCU based

 * lockfree traversal.

 *

 * In particular, it means that we can not poison the forward

 * pointers that may still be used for walking the hash list.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as hlist_add_head_rcu()

 * or hlist_del_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * hlist_for_each_entry().

 */

static inline void hlist_del_rcu(struct hlist_node *n)

{

	__hlist_del(n);

	n->pprev = LIST_POISON2;

}

/**

 * hlist_replace_rcu - replace old entry by new one

 * @old : the element to be replaced

 * @new : the new element to insert

 *

 * The @old entry will be replaced with the @new entry atomically.

 */

static inline void hlist_replace_rcu(struct hlist_node *old,

					struct hlist_node *new)

{

	struct hlist_node *next = old->next;

	new->next = next;

	new->pprev = old->pprev;

	rcu_assign_pointer(*(struct hlist_node __rcu **)new->pprev, new);

	if (next)

		new->next->pprev = &new->next;

	old->pprev = LIST_POISON2;

}

/*

 * return the first or the next element in an RCU protected hlist

 */

#define hlist_first_rcu(head)	(*((struct hlist_node __rcu **)(&(head)->first)))

#define hlist_next_rcu(node)	(*((struct hlist_node __rcu **)(&(node)->next)))

#define hlist_pprev_rcu(node)	(*((struct hlist_node __rcu **)((node)->pprev)))

/**

 * hlist_add_head_rcu

 * @n: the element to add to the hash list.

 * @h: the list to add to.

 *

 * Description:

 * Adds the specified element to the specified hlist,

 * while permitting racing traversals.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as hlist_add_head_rcu()

 * or hlist_del_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * hlist_for_each_entry_rcu(), used to prevent memory-consistency

 * problems on Alpha CPUs.  Regardless of the type of CPU, the

 * list-traversal primitive must be guarded by rcu_read_lock().

 */

static inline void hlist_add_head_rcu(struct hlist_node *n,

					struct hlist_head *h)

{

	struct hlist_node *first = h->first;

	n->next = first;

	n->pprev = &h->first;

	rcu_assign_pointer(hlist_first_rcu(h), n);

	if (first)

		first->pprev = &n->next;

}

/**

 * hlist_add_before_rcu

 * @n: the new element to add to the hash list.

 * @next: the existing element to add the new element before.

 *

 * Description:

 * Adds the specified element to the specified hlist

 * before the specified node while permitting racing traversals.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as hlist_add_head_rcu()

 * or hlist_del_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * hlist_for_each_entry_rcu(), used to prevent memory-consistency

 * problems on Alpha CPUs.

 */

static inline void hlist_add_before_rcu(struct hlist_node *n,

					struct hlist_node *next)

{

	n->pprev = next->pprev;

	n->next = next;

	rcu_assign_pointer(hlist_pprev_rcu(n), n);

	next->pprev = &n->next;

}

/**

 * hlist_add_behind_rcu

 * @n: the new element to add to the hash list.

 * @prev: the existing element to add the new element after.

 *

 * Description:

 * Adds the specified element to the specified hlist

 * after the specified node while permitting racing traversals.

 *

 * The caller must take whatever precautions are necessary

 * (such as holding appropriate locks) to avoid racing

 * with another list-mutation primitive, such as hlist_add_head_rcu()

 * or hlist_del_rcu(), running on this same list.

 * However, it is perfectly legal to run concurrently with

 * the _rcu list-traversal primitives, such as

 * hlist_for_each_entry_rcu(), used to prevent memory-consistency

 * problems on Alpha CPUs.

 */

static inline void hlist_add_behind_rcu(struct hlist_node *n,

					struct hlist_node *prev)

{

	n->next = prev->next;

	n->pprev = &prev->next;

	rcu_assign_pointer(hlist_next_rcu(prev), n);

	if (n->next)

		n->next->pprev = &n->next;

}

#define __hlist_for_each_rcu(pos, head)				\

	for (pos = rcu_dereference(hlist_first_rcu(head));	\

	     pos;						\

	     pos = rcu_dereference(hlist_next_rcu(pos)))

/**

 * hlist_for_each_entry_rcu - iterate over rcu list of given type

 * @pos:	the type * to use as a loop cursor.

 * @head:	the head for your list.

 * @member:	the name of the hlist_node within the struct.

 *

 * This list-traversal primitive may safely run concurrently with

 * the _rcu list-mutation primitives such as hlist_add_head_rcu()

 * as long as the traversal is guarded by rcu_read_lock().

 */

#define hlist_for_each_entry_rcu(pos, head, member)			\

	for (pos = hlist_entry_safe (rcu_dereference_raw(hlist_first_rcu(head)),\

			typeof(*(pos)), member);			\

		pos;							\

		pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\

			&(pos)->member)), typeof(*(pos)), member))

/**

 * hlist_for_each_entry_rcu_notrace - iterate over rcu list of given type (for tracing)

 * @pos:	the type * to use as a loop cursor.

 * @head:	the head for your list.

 * @member:	the name of the hlist_node within the struct.

 *

 * This list-traversal primitive may safely run concurrently with

 * the _rcu list-mutation primitives such as hlist_add_head_rcu()

 * as long as the traversal is guarded by rcu_read_lock().

 *

 * This is the same as hlist_for_each_entry_rcu() except that it does

 * not do any RCU debugging or tracing.

 */

#define hlist_for_each_entry_rcu_notrace(pos, head, member)			\

	for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\

			typeof(*(pos)), member);			\

		pos;							\

		pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\

			&(pos)->member)), typeof(*(pos)), member))

/**

 * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type

 * @pos:	the type * to use as a loop cursor.

 * @head:	the head for your list.

 * @member:	the name of the hlist_node within the struct.

 *

 * This list-traversal primitive may safely run concurrently with

 * the _rcu list-mutation primitives such as hlist_add_head_rcu()

 * as long as the traversal is guarded by rcu_read_lock().

 */

#define hlist_for_each_entry_rcu_bh(pos, head, member)			\

	for (pos = hlist_entry_safe(rcu_dereference_bh(hlist_first_rcu(head)),\

			typeof(*(pos)), member);			\

		pos;							\

		pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu(\

			&(pos)->member)), typeof(*(pos)), member))

/**

 * hlist_for_each_entry_continue_rcu - iterate over a hlist continuing after current point

 * @pos:	the type * to use as a loop cursor.

 * @member:	the name of the hlist_node within the struct.

 */

#define hlist_for_each_entry_continue_rcu(pos, member)			\

	for (pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu( \

			&(pos)->member)), typeof(*(pos)), member);	\

	     pos;							\

	     pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(	\

			&(pos)->member)), typeof(*(pos)), member))

/**

 * hlist_for_each_entry_continue_rcu_bh - iterate over a hlist continuing after current point

 * @pos:	the type * to use as a loop cursor.

 * @member:	the name of the hlist_node within the struct.

 */

#define hlist_for_each_entry_continue_rcu_bh(pos, member)		\

	for (pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu(  \

			&(pos)->member)), typeof(*(pos)), member);	\

	     pos;							\

	     pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu(	\

			&(pos)->member)), typeof(*(pos)), member))

/**

 * hlist_for_each_entry_from_rcu - iterate over a hlist continuing from current point

 * @pos:	the type * to use as a loop cursor.

 * @member:	the name of the hlist_node within the struct.

 */

#define hlist_for_each_entry_from_rcu(pos, member)			\

	for (; pos;							\

	     pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(	\

			&(pos)->member)), typeof(*(pos)), member))

#endif	/* __KERNEL__ */

#endif