Rev 6082 | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1408 | serge | 1 | /* ------------------------------------------------------------------------- */ |
2 | /* */ |
||
3 | /* i2c.h - definitions for the i2c-bus interface */ |
||
4 | /* */ |
||
5 | /* ------------------------------------------------------------------------- */ |
||
6 | /* Copyright (C) 1995-2000 Simon G. Vogl |
||
7 | |||
8 | This program is free software; you can redistribute it and/or modify |
||
9 | it under the terms of the GNU General Public License as published by |
||
10 | the Free Software Foundation; either version 2 of the License, or |
||
11 | (at your option) any later version. |
||
12 | |||
13 | This program is distributed in the hope that it will be useful, |
||
14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
||
15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||
16 | GNU General Public License for more details. |
||
17 | |||
18 | You should have received a copy of the GNU General Public License |
||
19 | along with this program; if not, write to the Free Software |
||
3031 | serge | 20 | Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
21 | MA 02110-1301 USA. */ |
||
1408 | serge | 22 | /* ------------------------------------------------------------------------- */ |
23 | |||
24 | /* With some changes from Kyösti Mälkki |
||
25 | Frodo Looijaard |
||
26 | #ifndef _LINUX_I2C_H |
||
27 | #define _LINUX_I2C_H |
||
28 | |||
1964 | serge | 29 | #include |
6082 | serge | 30 | #include |
5270 | serge | 31 | #include |
32 | #include |
||
6936 | serge | 33 | #include |
5270 | serge | 34 | #include |
1408 | serge | 35 | |
3031 | serge | 36 | extern struct bus_type i2c_bus_type; |
37 | extern struct device_type i2c_adapter_type; |
||
1408 | serge | 38 | |
1964 | serge | 39 | /* --- General options ------------------------------------------------ */ |
1408 | serge | 40 | |
41 | struct i2c_msg; |
||
42 | struct i2c_algorithm; |
||
43 | struct i2c_adapter; |
||
44 | struct i2c_client; |
||
1964 | serge | 45 | struct i2c_driver; |
1408 | serge | 46 | union i2c_smbus_data; |
1964 | serge | 47 | struct i2c_board_info; |
1408 | serge | 48 | |
49 | |||
50 | /* Transfer num messages. |
||
51 | */ |
||
52 | extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, |
||
53 | int num); |
||
54 | |||
55 | /** |
||
1430 | serge | 56 | * struct i2c_driver - represent an I2C device driver |
57 | * @class: What kind of i2c device we instantiate (for detect) |
||
1970 | serge | 58 | * @attach_adapter: Callback for bus addition (deprecated) |
1430 | serge | 59 | * @probe: Callback for device binding |
60 | * @remove: Callback for device unbinding |
||
61 | * @shutdown: Callback for device shutdown |
||
1964 | serge | 62 | * @alert: Alert callback, for example for the SMBus alert protocol |
1430 | serge | 63 | * @command: Callback for bus-wide signaling (optional) |
64 | * @driver: Device driver model driver |
||
65 | * @id_table: List of I2C devices supported by this driver |
||
66 | * @detect: Callback for device detection |
||
67 | * @address_list: The I2C addresses to probe (for detect) |
||
68 | * @clients: List of detected clients we created (for i2c-core use only) |
||
69 | * |
||
70 | * The driver.owner field should be set to the module owner of this driver. |
||
71 | * The driver.name field should be set to the name of this driver. |
||
72 | * |
||
3031 | serge | 73 | * For automatic device detection, both @detect and @address_list must |
1430 | serge | 74 | * be defined. @class should also be set, otherwise only devices forced |
75 | * with module parameters will be created. The detect function must |
||
76 | * fill at least the name field of the i2c_board_info structure it is |
||
77 | * handed upon successful detection, and possibly also the flags field. |
||
78 | * |
||
79 | * If @detect is missing, the driver will still work fine for enumerated |
||
80 | * devices. Detected devices simply won't be supported. This is expected |
||
81 | * for the many I2C/SMBus devices which can't be detected reliably, and |
||
82 | * the ones which can always be enumerated in practice. |
||
83 | * |
||
84 | * The i2c_client structure which is handed to the @detect callback is |
||
85 | * not a real i2c_client. It is initialized just enough so that you can |
||
86 | * call i2c_smbus_read_byte_data and friends on it. Don't do anything |
||
87 | * else with it. In particular, calling dev_dbg and friends on it is |
||
88 | * not allowed. |
||
89 | */ |
||
90 | struct i2c_driver { |
||
91 | unsigned int class; |
||
92 | |||
4065 | Serge | 93 | /* Notifies the driver that a new bus has appeared. You should avoid |
94 | * using this, it will be removed in a near future. |
||
1430 | serge | 95 | */ |
1970 | serge | 96 | int (*attach_adapter)(struct i2c_adapter *) __deprecated; |
1430 | serge | 97 | |
98 | /* Standard driver model interfaces */ |
||
99 | int (*probe)(struct i2c_client *, const struct i2c_device_id *); |
||
100 | int (*remove)(struct i2c_client *); |
||
101 | |||
102 | /* driver model interfaces that don't relate to enumeration */ |
||
103 | void (*shutdown)(struct i2c_client *); |
||
104 | |||
105 | /* Alert callback, for example for the SMBus alert protocol. |
||
106 | * The format and meaning of the data value depends on the protocol. |
||
107 | * For the SMBus alert protocol, there is a single bit of data passed |
||
108 | * as the alert response's low bit ("event flag"). |
||
109 | */ |
||
110 | void (*alert)(struct i2c_client *, unsigned int data); |
||
111 | |||
112 | /* a ioctl like command that can be used to perform specific functions |
||
113 | * with the device. |
||
114 | */ |
||
115 | int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); |
||
116 | |||
117 | // struct device_driver driver; |
||
118 | const struct i2c_device_id *id_table; |
||
119 | |||
120 | /* Device detection callback for automatic device creation */ |
||
121 | // int (*detect)(struct i2c_client *, struct i2c_board_info *); |
||
122 | const unsigned short *address_list; |
||
123 | struct list_head clients; |
||
124 | }; |
||
125 | #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) |
||
126 | |||
127 | /** |
||
1408 | serge | 128 | * struct i2c_client - represent an I2C slave device |
129 | * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address; |
||
130 | * I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking |
||
131 | * @addr: Address used on the I2C bus connected to the parent adapter. |
||
132 | * @name: Indicates the type of the device, usually a chip name that's |
||
133 | * generic enough to hide second-sourcing and compatible revisions. |
||
134 | * @adapter: manages the bus segment hosting this I2C device |
||
135 | * @dev: Driver model device node for the slave. |
||
136 | * @irq: indicates the IRQ generated by this device (if any) |
||
137 | * @detected: member of an i2c_driver.clients list or i2c-core's |
||
138 | * userspace_devices list |
||
5270 | serge | 139 | * @slave_cb: Callback when I2C slave mode of an adapter is used. The adapter |
140 | * calls it to pass on slave events to the slave driver. |
||
1408 | serge | 141 | * |
142 | * An i2c_client identifies a single device (i.e. chip) connected to an |
||
143 | * i2c bus. The behaviour exposed to Linux is defined by the driver |
||
144 | * managing the device. |
||
145 | */ |
||
146 | struct i2c_client { |
||
147 | unsigned short flags; /* div., see below */ |
||
148 | unsigned short addr; /* chip address - NOTE: 7bit */ |
||
149 | /* addresses are stored in the */ |
||
150 | /* _LOWER_ 7 bits */ |
||
151 | char name[I2C_NAME_SIZE]; |
||
152 | struct i2c_adapter *adapter; /* the adapter we sit on */ |
||
1964 | serge | 153 | struct device dev; /* the device structure */ |
154 | int irq; /* irq issued by device */ |
||
1408 | serge | 155 | struct list_head detected; |
156 | }; |
||
157 | #define to_i2c_client(d) container_of(d, struct i2c_client, dev) |
||
158 | |||
1430 | serge | 159 | extern struct i2c_client *i2c_verify_client(struct device *dev); |
5056 | serge | 160 | extern struct i2c_adapter *i2c_verify_adapter(struct device *dev); |
1408 | serge | 161 | |
5270 | serge | 162 | enum i2c_slave_event { |
6082 | serge | 163 | I2C_SLAVE_READ_REQUESTED, |
164 | I2C_SLAVE_WRITE_REQUESTED, |
||
165 | I2C_SLAVE_READ_PROCESSED, |
||
166 | I2C_SLAVE_WRITE_RECEIVED, |
||
5270 | serge | 167 | I2C_SLAVE_STOP, |
168 | }; |
||
1964 | serge | 169 | /** |
170 | * struct i2c_board_info - template for device creation |
||
171 | * @type: chip type, to initialize i2c_client.name |
||
172 | * @flags: to initialize i2c_client.flags |
||
173 | * @addr: stored in i2c_client.addr |
||
174 | * @platform_data: stored in i2c_client.dev.platform_data |
||
175 | * @archdata: copied into i2c_client.dev.archdata |
||
176 | * @of_node: pointer to OpenFirmware device node |
||
6082 | serge | 177 | * @fwnode: device node supplied by the platform firmware |
1964 | serge | 178 | * @irq: stored in i2c_client.irq |
179 | * |
||
180 | * I2C doesn't actually support hardware probing, although controllers and |
||
181 | * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's |
||
182 | * a device at a given address. Drivers commonly need more information than |
||
183 | * that, such as chip type, configuration, associated IRQ, and so on. |
||
184 | * |
||
185 | * i2c_board_info is used to build tables of information listing I2C devices |
||
186 | * that are present. This information is used to grow the driver model tree. |
||
187 | * For mainboards this is done statically using i2c_register_board_info(); |
||
188 | * bus numbers identify adapters that aren't yet available. For add-on boards, |
||
189 | * i2c_new_device() does this dynamically with the adapter already known. |
||
190 | */ |
||
191 | struct i2c_board_info { |
||
192 | char type[I2C_NAME_SIZE]; |
||
193 | unsigned short flags; |
||
194 | unsigned short addr; |
||
195 | void *platform_data; |
||
196 | struct dev_archdata *archdata; |
||
197 | int irq; |
||
198 | }; |
||
199 | |||
200 | /** |
||
201 | * I2C_BOARD_INFO - macro used to list an i2c device and its address |
||
202 | * @dev_type: identifies the device type |
||
203 | * @dev_addr: the device's address on the bus. |
||
204 | * |
||
205 | * This macro initializes essential fields of a struct i2c_board_info, |
||
206 | * declaring what has been provided on a particular board. Optional |
||
207 | * fields (such as associated irq, or device-specific platform_data) |
||
208 | * are provided using conventional syntax. |
||
209 | */ |
||
210 | #define I2C_BOARD_INFO(dev_type, dev_addr) \ |
||
211 | .type = dev_type, .addr = (dev_addr) |
||
1408 | serge | 212 | /* |
213 | * The following structs are for those who like to implement new bus drivers: |
||
214 | * i2c_algorithm is the interface to a class of hardware solutions which can |
||
215 | * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584 |
||
216 | * to name two of the most common. |
||
5056 | serge | 217 | * |
218 | * The return codes from the @master_xfer field should indicate the type of |
||
5270 | serge | 219 | * error code that occurred during the transfer, as documented in the kernel |
5056 | serge | 220 | * Documentation file Documentation/i2c/fault-codes. |
1408 | serge | 221 | */ |
222 | struct i2c_algorithm { |
||
223 | /* If an adapter algorithm can't do I2C-level access, set master_xfer |
||
224 | to NULL. If an adapter algorithm can do SMBus access, set |
||
225 | smbus_xfer. If set to NULL, the SMBus protocol is simulated |
||
226 | using common I2C messages */ |
||
227 | /* master_xfer should return the number of messages successfully |
||
228 | processed, or a negative value on error */ |
||
229 | int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs, |
||
230 | int num); |
||
231 | int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, |
||
232 | unsigned short flags, char read_write, |
||
233 | u8 command, int size, union i2c_smbus_data *data); |
||
234 | |||
235 | /* To determine what the adapter supports */ |
||
236 | u32 (*functionality) (struct i2c_adapter *); |
||
237 | }; |
||
238 | |||
5270 | serge | 239 | int i2c_recover_bus(struct i2c_adapter *adap); |
240 | |||
241 | /* Generic recovery routines */ |
||
242 | int i2c_generic_gpio_recovery(struct i2c_adapter *adap); |
||
243 | int i2c_generic_scl_recovery(struct i2c_adapter *adap); |
||
244 | |||
1408 | serge | 245 | /* |
246 | * i2c_adapter is the structure used to identify a physical i2c bus along |
||
247 | * with the access algorithms necessary to access it. |
||
248 | */ |
||
249 | struct i2c_adapter { |
||
1964 | serge | 250 | struct module *owner; |
1408 | serge | 251 | unsigned int class; /* classes to allow probing for */ |
252 | const struct i2c_algorithm *algo; /* the algorithm to access the bus */ |
||
253 | void *algo_data; |
||
254 | |||
255 | /* data fields that are valid for all devices */ |
||
1430 | serge | 256 | // struct rt_mutex bus_lock; |
1408 | serge | 257 | |
258 | int timeout; /* in jiffies */ |
||
259 | int retries; |
||
1430 | serge | 260 | struct device dev; /* the adapter device */ |
1408 | serge | 261 | |
262 | int nr; |
||
263 | char name[48]; |
||
264 | }; |
||
265 | #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev) |
||
266 | |||
1970 | serge | 267 | static inline void *i2c_get_adapdata(struct i2c_adapter *dev) |
1430 | serge | 268 | { |
269 | return dev_get_drvdata(&dev->dev); |
||
270 | } |
||
1408 | serge | 271 | |
1430 | serge | 272 | static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) |
273 | { |
||
274 | dev_set_drvdata(&dev->dev, data); |
||
275 | } |
||
276 | |||
1964 | serge | 277 | /* Adapter locking functions, exported for shared pin cases */ |
278 | void i2c_lock_adapter(struct i2c_adapter *); |
||
279 | void i2c_unlock_adapter(struct i2c_adapter *); |
||
280 | |||
1408 | serge | 281 | /*flags for the client struct: */ |
282 | #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ |
||
283 | #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ |
||
284 | /* Must equal I2C_M_TEN below */ |
||
285 | #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */ |
||
3031 | serge | 286 | #define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */ |
287 | /* Must match I2C_M_STOP|IGNORE_NAK */ |
||
1408 | serge | 288 | |
289 | /* i2c adapter classes (bitmask) */ |
||
290 | #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ |
||
291 | #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ |
||
1964 | serge | 292 | #define I2C_CLASS_SPD (1<<7) /* Memory modules */ |
5056 | serge | 293 | #define I2C_CLASS_DEPRECATED (1<<8) /* Warn users that adapter will stop using classes */ |
1408 | serge | 294 | |
295 | /* Internal numbers to terminate lists */ |
||
296 | #define I2C_CLIENT_END 0xfffeU |
||
297 | |||
298 | /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ |
||
299 | #define I2C_ADDRS(addr, addrs...) \ |
||
300 | ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) |
||
301 | |||
302 | |||
2967 | Serge | 303 | |
6082 | serge | 304 | |
1408 | serge | 305 | /** |
306 | * struct i2c_msg - an I2C transaction segment beginning with START |
||
307 | * @addr: Slave address, either seven or ten bits. When this is a ten |
||
308 | * bit address, I2C_M_TEN must be set in @flags and the adapter |
||
309 | * must support I2C_FUNC_10BIT_ADDR. |
||
310 | * @flags: I2C_M_RD is handled by all adapters. No other flags may be |
||
311 | * provided unless the adapter exported the relevant I2C_FUNC_* |
||
312 | * flags through i2c_check_functionality(). |
||
313 | * @len: Number of data bytes in @buf being read from or written to the |
||
314 | * I2C slave address. For read transactions where I2C_M_RECV_LEN |
||
315 | * is set, the caller guarantees that this buffer can hold up to |
||
316 | * 32 bytes in addition to the initial length byte sent by the |
||
317 | * slave (plus, if used, the SMBus PEC); and this value will be |
||
318 | * incremented by the number of block data bytes received. |
||
319 | * @buf: The buffer into which data is read, or from which it's written. |
||
320 | * |
||
321 | * An i2c_msg is the low level representation of one segment of an I2C |
||
322 | * transaction. It is visible to drivers in the @i2c_transfer() procedure, |
||
323 | * to userspace from i2c-dev, and to I2C adapter drivers through the |
||
324 | * @i2c_adapter.@master_xfer() method. |
||
325 | * |
||
326 | * Except when I2C "protocol mangling" is used, all I2C adapters implement |
||
327 | * the standard rules for I2C transactions. Each transaction begins with a |
||
328 | * START. That is followed by the slave address, and a bit encoding read |
||
329 | * versus write. Then follow all the data bytes, possibly including a byte |
||
330 | * with SMBus PEC. The transfer terminates with a NAK, or when all those |
||
331 | * bytes have been transferred and ACKed. If this is the last message in a |
||
332 | * group, it is followed by a STOP. Otherwise it is followed by the next |
||
333 | * @i2c_msg transaction segment, beginning with a (repeated) START. |
||
334 | * |
||
335 | * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then |
||
336 | * passing certain @flags may have changed those standard protocol behaviors. |
||
337 | * Those flags are only for use with broken/nonconforming slaves, and with |
||
338 | * adapters which are known to support the specific mangling options they |
||
339 | * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). |
||
340 | */ |
||
341 | struct i2c_msg { |
||
1964 | serge | 342 | __u16 addr; /* slave address */ |
343 | __u16 flags; |
||
1408 | serge | 344 | #define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ |
345 | #define I2C_M_RD 0x0001 /* read data, from slave to master */ |
||
346 | #define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */ |
||
347 | #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ |
||
348 | #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ |
||
349 | #define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ |
||
350 | #define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ |
||
1964 | serge | 351 | __u16 len; /* msg length */ |
352 | __u8 *buf; /* pointer to msg data */ |
||
1408 | serge | 353 | }; |
354 | |||
355 | /* To determine what functionality is present */ |
||
356 | |||
357 | #define I2C_FUNC_I2C 0x00000001 |
||
358 | #define I2C_FUNC_10BIT_ADDR 0x00000002 |
||
359 | #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_NOSTART etc. */ |
||
360 | #define I2C_FUNC_SMBUS_PEC 0x00000008 |
||
361 | #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ |
||
362 | #define I2C_FUNC_SMBUS_QUICK 0x00010000 |
||
363 | #define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 |
||
364 | #define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 |
||
365 | #define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 |
||
366 | #define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 |
||
367 | #define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 |
||
368 | #define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 |
||
369 | #define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 |
||
370 | #define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 |
||
371 | #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 |
||
372 | #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ |
||
373 | #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ |
||
374 | |||
375 | #define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ |
||
376 | I2C_FUNC_SMBUS_WRITE_BYTE) |
||
377 | #define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ |
||
378 | I2C_FUNC_SMBUS_WRITE_BYTE_DATA) |
||
379 | #define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ |
||
380 | I2C_FUNC_SMBUS_WRITE_WORD_DATA) |
||
381 | #define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ |
||
382 | I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) |
||
383 | #define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ |
||
384 | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) |
||
385 | |||
386 | #define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ |
||
387 | I2C_FUNC_SMBUS_BYTE | \ |
||
388 | I2C_FUNC_SMBUS_BYTE_DATA | \ |
||
389 | I2C_FUNC_SMBUS_WORD_DATA | \ |
||
390 | I2C_FUNC_SMBUS_PROC_CALL | \ |
||
391 | I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ |
||
392 | I2C_FUNC_SMBUS_I2C_BLOCK | \ |
||
393 | I2C_FUNC_SMBUS_PEC) |
||
394 | |||
395 | /* |
||
396 | * Data for SMBus Messages |
||
397 | */ |
||
398 | #define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ |
||
399 | union i2c_smbus_data { |
||
400 | __u8 byte; |
||
401 | __u16 word; |
||
402 | __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ |
||
403 | /* and one more for user-space compatibility */ |
||
404 | }; |
||
405 | |||
406 | /* i2c_smbus_xfer read or write markers */ |
||
407 | #define I2C_SMBUS_READ 1 |
||
408 | #define I2C_SMBUS_WRITE 0 |
||
409 | |||
410 | /* SMBus transaction types (size parameter in the above functions) |
||
411 | Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ |
||
412 | #define I2C_SMBUS_QUICK 0 |
||
413 | #define I2C_SMBUS_BYTE 1 |
||
414 | #define I2C_SMBUS_BYTE_DATA 2 |
||
415 | #define I2C_SMBUS_WORD_DATA 3 |
||
416 | #define I2C_SMBUS_PROC_CALL 4 |
||
417 | #define I2C_SMBUS_BLOCK_DATA 5 |
||
418 | #define I2C_SMBUS_I2C_BLOCK_BROKEN 6 |
||
419 | #define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ |
||
420 | #define I2C_SMBUS_I2C_BLOCK_DATA 8 |
||
421 | |||
3192 | Serge | 422 | #define i2c_add_adapter(x) 0 |
423 | #define i2c_del_adapter(x) |
||
424 | |||
1408 | serge | 425 | #endif /* _LINUX_I2C_H */8)><8)>7)><7)>3)><3)>0)><0)> |