Rev 3545 | Rev 4334 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
3545 | hidnplayr | 1 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
2 | ;; ;; |
||
3 | ;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;; |
||
4 | ;; Distributed under terms of the GNU General Public License ;; |
||
5 | ;; ;; |
||
6 | ;; 3Com network driver for KolibriOS ;; |
||
7 | ;; ;; |
||
8 | ;; Ported to KolibriOS net-branch by hidnplayr (28/05/10) ;; |
||
9 | ;; ;; |
||
10 | ;; Thanks to: scrap metal recyclers, whom provide me with ;; |
||
11 | ;; loads of hardware ;; |
||
12 | ;; diamond: who makes me understand KolibriOS ;; |
||
13 | ;; ;; |
||
14 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
15 | |||
16 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
17 | ;; ;; |
||
18 | ;; 3C59X.INC ;; |
||
19 | ;; ;; |
||
20 | ;; Ethernet driver for Menuet OS ;; |
||
21 | ;; ;; |
||
22 | ;; Driver for 3Com fast etherlink 3c59x and ;; |
||
23 | ;; etherlink XL 3c900 and 3c905 cards ;; |
||
24 | ;; References: ;; |
||
25 | ;; www.3Com.com - data sheets ;; |
||
26 | ;; DP83840A.pdf - ethernet physical layer ;; |
||
27 | ;; 3c59x.c - linux driver ;; |
||
28 | ;; ethernet driver template by Mike Hibbett ;; |
||
29 | ;; ;; |
||
30 | ;; Credits ;; |
||
31 | ;; Mike Hibbett, ;; |
||
32 | ;; who kindly supplied me with a 3Com905C-TX-M card ;; |
||
33 | ;; ;; |
||
34 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
35 | ;; |
||
36 | ;; Copyright (c) 2004, Endre Kozma |
||
37 | ;; All rights reserved. |
||
38 | ;; |
||
39 | ;; Redistribution and use in source and binary forms, with or without |
||
40 | ;; modification, are permitted provided that the following conditions are |
||
41 | ;; met: |
||
42 | ;; |
||
43 | ;; 1. Redistributions of source code must retain the above copyright notice, |
||
44 | ;; this list of conditions and the following disclaimer. |
||
45 | ;; |
||
46 | ;; 2. Redistributions in binary form must reproduce the above copyright |
||
47 | ;; notice, this list of conditions and the following disclaimer in the |
||
48 | ;; documentation and/or other materials provided with the distribution. |
||
49 | ;; |
||
50 | ;; 3. The name of the author may not be used to endorse or promote products |
||
51 | ;; derived from this software without specific prior written permission. |
||
52 | ;; |
||
53 | ;; THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
||
54 | ;; IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
||
55 | ;; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
||
56 | ;; IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
||
57 | ;; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
||
58 | ;; NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
||
59 | ;; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
||
60 | ;; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
||
61 | ;; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
||
62 | ;; THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
||
63 | ;; |
||
64 | ;; History |
||
65 | ;; ======= |
||
66 | ;; $Log: 3C59X.INC,v $ |
||
67 | ;; Revision 1.3 2004/07/11 12:21:12 kozma |
||
68 | ;; Support of vortex chips (3c59x) added. |
||
69 | ;; Support of 3c920 and 3c982 added. |
||
70 | ;; Corrections. |
||
71 | ;; |
||
72 | ;; Revision 1.2 2004/06/12 19:40:20 kozma |
||
73 | ;; Function e3c59x_set_available_media added in order to set |
||
74 | ;; the default media in case auto detection finds no valid link. |
||
75 | ;; Incorrect mii check removed (3c900 Cyclone works now). |
||
76 | ;; Cleanups. |
||
77 | ;; |
||
78 | ;; Revision 1.1 2004/06/12 18:27:15 kozma |
||
79 | ;; Initial revision |
||
80 | ;; |
||
81 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
82 | |||
83 | format MS COFF |
||
84 | |||
85 | API_VERSION = 0x01000100 |
||
86 | DRIVER_VERSION = 5 |
||
87 | |||
88 | MAX_DEVICES = 16 |
||
89 | FORCE_FD = 0 ; forcing full duplex mode makes sense at some cards and link types |
||
90 | PROMISCIOUS = 0 ; enables promiscous mode |
||
91 | |||
92 | DEBUG = 1 |
||
93 | __DEBUG__ = 1 |
||
94 | __DEBUG_LEVEL__ = 2 |
||
95 | |||
96 | include '../proc32.inc' |
||
97 | include '../imports.inc' |
||
98 | include '../fdo.inc' |
||
99 | include '../netdrv.inc' |
||
100 | |||
101 | public START |
||
102 | public service_proc |
||
103 | public version |
||
104 | |||
105 | struc DPD { ; Download Packet Descriptor |
||
106 | |||
107 | .next_ptr dd ? |
||
108 | .frame_start_hdr dd ? |
||
109 | .frag_addr dd ? ; for packet data |
||
110 | .frag_len dd ? ; for packet data |
||
111 | .realaddr dd ? |
||
112 | .size = 32 |
||
113 | } |
||
114 | |||
115 | virtual at 0 |
||
116 | dpd DPD |
||
117 | end virtual |
||
118 | |||
119 | |||
120 | struc UPD { ; Upload Packet Descriptor |
||
121 | |||
122 | .next_ptr dd ? |
||
123 | .pkt_status dd ? |
||
124 | .frag_addr dd ? |
||
125 | .frag_len dd ? ; for packet data |
||
126 | .realaddr dd ? |
||
127 | .size = 32 |
||
128 | |||
129 | } |
||
130 | |||
131 | virtual at 0 |
||
132 | upd UPD |
||
133 | end virtual |
||
134 | |||
135 | ; Registers |
||
136 | REG_POWER_MGMT_CTRL = 0x7c |
||
137 | REG_UP_LIST_PTR = 0x38 |
||
138 | REG_UP_PKT_STATUS = 0x30 |
||
139 | REG_TX_FREE_THRESH = 0x2f |
||
140 | REG_DN_LIST_PTR = 0x24 |
||
141 | REG_DMA_CTRL = 0x20 |
||
142 | REG_TX_STATUS = 0x1b |
||
143 | REG_RX_STATUS = 0x18 |
||
144 | REG_TX_DATA = 0x10 |
||
145 | |||
146 | ; Common window registers |
||
147 | REG_INT_STATUS = 0xe |
||
148 | REG_COMMAND = 0xe |
||
149 | |||
150 | ; Register window 7 |
||
151 | REG_MASTER_STATUS = 0xc |
||
152 | REG_POWER_MGMT_EVENT = 0xc |
||
153 | REG_MASTER_LEN = 0x6 |
||
154 | REG_VLAN_ETHER_TYPE = 0x4 |
||
155 | REG_VLAN_MASK = 0x0 |
||
156 | REG_MASTER_ADDRESS = 0x0 |
||
157 | |||
158 | ; Register window 6 |
||
159 | REG_BYTES_XMITTED_OK = 0xc |
||
160 | REG_BYTES_RCVD_OK = 0xa |
||
161 | REG_UPPER_FRAMES_OK = 0x9 |
||
162 | REG_FRAMES_DEFERRED = 0x8 |
||
163 | REG_FRAMES_RCVD_OK = 0x7 |
||
164 | REG_FRAMES_XMITTED_OK = 0x6 |
||
165 | REG_RX_OVERRUNS = 0x5 |
||
166 | REG_LATE_COLLISIONS = 0x4 |
||
167 | REG_SINGLE_COLLISIONS = 0x3 |
||
168 | REG_MULTIPLE_COLLISIONS = 0x2 |
||
169 | REG_SQE_ERRORS = 0x1 |
||
170 | REG_CARRIER_LOST = 0x0 |
||
171 | |||
172 | ; Register window 5 |
||
173 | REG_INDICATION_ENABLE = 0xc |
||
174 | REG_INTERRUPT_ENABLE = 0xa |
||
175 | REG_TX_RECLAIM_THRESH = 0x9 |
||
176 | REG_RX_FILTER = 0x8 |
||
177 | REG_RX_EARLY_THRESH = 0x6 |
||
178 | REG_TX_START_THRESH = 0x0 |
||
179 | |||
180 | ; Register window 4 |
||
181 | REG_UPPER_BYTES_OK = 0xe |
||
182 | REG_BAD_SSD = 0xc |
||
183 | REG_MEDIA_STATUS = 0xa |
||
184 | REG_PHYSICAL_MGMT = 0x8 |
||
185 | REG_NETWORK_DIAGNOSTIC = 0x6 |
||
186 | REG_FIFO_DIAGNOSTIC = 0x4 |
||
187 | REG_VCO_DIAGNOSTIC = 0x2 ; may not supported |
||
188 | |||
189 | ; Bits in register window 4 |
||
190 | BIT_AUTOSELECT = 24 |
||
191 | |||
192 | ; Register window 3 |
||
193 | REG_TX_FREE = 0xc |
||
194 | REG_RX_FREE = 0xa |
||
195 | REG_MEDIA_OPTIONS = 0x8 |
||
196 | REG_MAC_CONTROL = 0x6 |
||
197 | REG_MAX_PKT_SIZE = 0x4 |
||
198 | REG_INTERNAL_CONFIG = 0x0 |
||
199 | |||
200 | ; Register window 2 |
||
201 | REG_RESET_OPTIONS = 0xc |
||
202 | REG_STATION_MASK_HI = 0xa |
||
203 | REG_STATION_MASK_MID = 0x8 |
||
204 | REG_STATION_MASK_LO = 0x6 |
||
205 | REG_STATION_ADDRESS_HI = 0x4 |
||
206 | REG_STATION_ADDRESS_MID = 0x2 |
||
207 | REG_STATION_ADDRESS_LO = 0x0 |
||
208 | |||
209 | ; Register window 1 |
||
210 | REG_TRIGGER_BITS = 0xc |
||
211 | REG_SOS_BITS = 0xa |
||
212 | REG_WAKE_ON_TIMER = 0x8 |
||
213 | REG_SMB_RXBYTES = 0x7 |
||
214 | REG_SMB_DIAG = 0x5 |
||
215 | REG_SMB_ARB = 0x4 |
||
216 | REG_SMB_STATUS = 0x2 |
||
217 | REG_SMB_ADDRESS = 0x1 |
||
218 | REG_SMB_FIFO_DATA = 0x0 |
||
219 | |||
220 | ; Register window 0 |
||
221 | REG_EEPROM_DATA = 0xc |
||
222 | REG_EEPROM_COMMAND = 0xa |
||
223 | REG_BIOS_ROM_DATA = 0x8 |
||
224 | REG_BIOS_ROM_ADDR = 0x4 |
||
225 | |||
226 | ; Physical management bits |
||
227 | BIT_MGMT_DIR = 2 ; drive with the data written in mgmtData |
||
228 | BIT_MGMT_DATA = 1 ; MII management data bit |
||
229 | BIT_MGMT_CLK = 0 ; MII management clock |
||
230 | |||
231 | ; MII commands |
||
232 | MII_CMD_MASK = (1111b shl 10) |
||
233 | MII_CMD_READ = (0110b shl 10) |
||
234 | MII_CMD_WRITE = (0101b shl 10) |
||
235 | |||
236 | ; MII registers |
||
237 | REG_MII_BMCR = 0 ; basic mode control register |
||
238 | REG_MII_BMSR = 1 ; basic mode status register |
||
239 | REG_MII_ANAR = 4 ; auto negotiation advertisement register |
||
240 | REG_MII_ANLPAR = 5 ; auto negotiation link partner ability register |
||
241 | REG_MII_ANER = 6 ; auto negotiation expansion register |
||
242 | |||
243 | ; MII bits |
||
244 | BIT_MII_AUTONEG_COMPLETE = 5 ; auto-negotiation complete |
||
245 | BIT_MII_PREAMBLE_SUPPRESSION = 6 |
||
246 | |||
247 | ; eeprom bits and commands |
||
248 | EEPROM_CMD_READ = 0x80 |
||
249 | EEPROM_BIT_BUSY = 15 |
||
250 | |||
251 | ; eeprom registers |
||
252 | EEPROM_REG_OEM_NODE_ADDR= 0xa |
||
253 | EEPROM_REG_CAPABILITIES = 0x10 |
||
254 | |||
255 | ; Commands for command register |
||
256 | SELECT_REGISTER_WINDOW = (1 shl 11) |
||
257 | |||
258 | IS_VORTEX = 0x1 |
||
259 | IS_BOOMERANG = 0x2 |
||
260 | IS_CYCLONE = 0x4 |
||
261 | IS_TORNADO = 0x8 |
||
262 | EEPROM_8BIT = 0x10 |
||
263 | HAS_PWR_CTRL = 0x20 |
||
264 | HAS_MII = 0x40 |
||
265 | HAS_NWAY = 0x80 |
||
266 | HAS_CB_FNS = 0x100 |
||
267 | INVERT_MII_PWR = 0x200 |
||
268 | INVERT_LED_PWR = 0x400 |
||
269 | MAX_COLLISION_RESET = 0x800 |
||
270 | EEPROM_OFFSET = 0x1000 |
||
271 | HAS_HWCKSM = 0x2000 |
||
272 | EXTRA_PREAMBLE = 0x4000 |
||
273 | |||
274 | ; Status |
||
275 | IntLatch = 0x0001 |
||
276 | HostError = 0x0002 |
||
277 | TxComplete = 0x0004 |
||
278 | TxAvailable = 0x0008 |
||
279 | RxComplete = 0x0010 |
||
280 | RxEarly = 0x0020 |
||
281 | IntReq = 0x0040 |
||
282 | StatsFull = 0x0080 |
||
283 | DMADone = 0x0100 |
||
284 | DownComplete = 0x0200 |
||
285 | UpComplete = 0x0400 |
||
286 | DMAInProgress = 0x0800 ; 1 shl 11 (DMA controller is still busy) |
||
287 | CmdInProgress = 0x1000 ; 1 shl 12 (EL3_CMD is still busy) |
||
288 | |||
289 | S_5_INTS = HostError + RxEarly + UpComplete + DownComplete ;+ TxComplete + RxComplete + TxAvailable |
||
290 | |||
291 | ; Commands |
||
292 | TotalReset = 0 shl 11 |
||
293 | SelectWindow = 1 shl 11 |
||
294 | StartCoax = 2 shl 11 |
||
295 | RxDisable = 3 shl 11 |
||
296 | RxEnable = 4 shl 11 |
||
297 | RxReset = 5 shl 11 |
||
298 | UpStall = 6 shl 11 |
||
299 | UpUnstall = (6 shl 11)+1 |
||
300 | DownStall = (6 shl 11)+2 |
||
301 | DownUnstall = (6 shl 11)+3 |
||
302 | RxDiscard = 8 shl 11 |
||
303 | TxEnable = 9 shl 11 |
||
304 | TxDisable = 10 shl 11 |
||
305 | TxReset = 11 shl 11 |
||
306 | FakeIntr = 12 shl 11 |
||
307 | AckIntr = 13 shl 11 |
||
308 | SetIntrEnb = 14 shl 11 |
||
309 | SetStatusEnb = 15 shl 11 |
||
310 | SetRxFilter = 16 shl 11 |
||
311 | SetRxThreshold = 17 shl 11 |
||
312 | SetTxThreshold = 18 shl 11 |
||
313 | SetTxStart = 19 shl 11 |
||
314 | StartDMAUp = 20 shl 11 |
||
315 | StartDMADown = (20 shl 11)+1 |
||
316 | StatsEnable = 21 shl 11 |
||
317 | StatsDisable = 22 shl 11 |
||
318 | StopCoax = 23 shl 11 |
||
319 | SetFilterBit = 25 shl 11 |
||
320 | |||
321 | ; Rx mode bits |
||
322 | RxStation = 1 |
||
323 | RxMulticast = 2 |
||
324 | RxBroadcast = 4 |
||
325 | RxProm = 8 |
||
326 | |||
327 | ; RX/TX buffers sizes |
||
328 | MAX_ETH_PKT_SIZE = 1536 ; max packet size |
||
329 | NUM_RX_DESC = 4 ; a power of 2 number |
||
330 | NUM_TX_DESC = 4 ; a power of 2 number |
||
331 | MAX_ETH_FRAME_SIZE = 1520 ; size of ethernet frame + bytes alignment |
||
332 | |||
333 | virtual at ebx |
||
334 | |||
335 | device: |
||
336 | |||
337 | ETH_DEVICE |
||
338 | |||
339 | .dpd_buffer rd (dpd.size*NUM_TX_DESC)/4 |
||
340 | .upd_buffer rd (upd.size*NUM_RX_DESC)/4 |
||
341 | .curr_upd dd ? |
||
342 | .prev_dpd dd ? |
||
343 | |||
344 | .io_addr dd ? |
||
345 | .pci_bus dd ? |
||
346 | .pci_dev dd ? |
||
347 | .irq_line db ? |
||
348 | rb 3 ; alignment |
||
349 | |||
350 | .prev_tx_frame dd ? |
||
351 | .ver_id db ? |
||
352 | .full_bus_master db ? |
||
353 | .has_hwcksm db ? |
||
354 | .preamble db ? |
||
355 | .dn_list_ptr_cleared db ? |
||
356 | |||
357 | .size = $ - device |
||
358 | |||
359 | end virtual |
||
360 | |||
361 | section '.flat' code readable align 16 |
||
362 | |||
363 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
364 | ;; ;; |
||
365 | ;; proc START ;; |
||
366 | ;; ;; |
||
367 | ;; (standard driver proc) ;; |
||
368 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
369 | |||
370 | align 4 |
||
371 | proc START stdcall, state:dword |
||
372 | |||
373 | cmp [state], 1 |
||
374 | jne .exit |
||
375 | |||
376 | .entry: |
||
377 | |||
3880 | hidnplayr | 378 | DEBUGF 1,"Loading driver\n" |
3545 | hidnplayr | 379 | stdcall RegService, my_service, service_proc |
380 | ret |
||
381 | |||
382 | .fail: |
||
383 | .exit: |
||
384 | xor eax, eax |
||
385 | ret |
||
386 | |||
387 | endp |
||
388 | |||
389 | |||
390 | |||
391 | |||
392 | |||
393 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
394 | ;; ;; |
||
395 | ;; proc SERVICE_PROC ;; |
||
396 | ;; ;; |
||
397 | ;; (standard driver proc) ;; |
||
398 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
399 | |||
400 | align 4 |
||
401 | proc service_proc stdcall, ioctl:dword |
||
402 | |||
403 | mov edx, [ioctl] |
||
404 | mov eax, [IOCTL.io_code] |
||
405 | |||
406 | ;------------------------------------------------------ |
||
407 | |||
408 | cmp eax, 0 ;SRV_GETVERSION |
||
409 | jne @F |
||
410 | |||
411 | cmp [IOCTL.out_size], 4 |
||
412 | jb .fail |
||
413 | mov eax, [IOCTL.output] |
||
414 | mov [eax], dword API_VERSION |
||
415 | |||
416 | xor eax, eax |
||
417 | ret |
||
418 | |||
419 | ;------------------------------------------------------ |
||
420 | @@: |
||
421 | cmp eax, 1 ;SRV_HOOK |
||
422 | jne .fail |
||
423 | |||
424 | cmp [IOCTL.inp_size], 3 ; Data input must be at least 3 bytes |
||
425 | jb .fail |
||
426 | |||
427 | mov eax, [IOCTL.input] |
||
428 | cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given |
||
429 | jne .fail ; other types of this hardware dont exist |
||
430 | |||
431 | ; check if the device is already listed |
||
432 | |||
433 | mov ecx, [VORTEX_DEVICES] |
||
434 | test ecx, ecx |
||
435 | jz .maybeboomerang |
||
436 | |||
437 | mov esi, VORTEX_LIST |
||
438 | mov eax, [IOCTL.input] ; get the pci bus and device numbers |
||
439 | mov ax , [eax+1] ; |
||
440 | .nextdevice: |
||
441 | mov ebx, [esi] |
||
442 | cmp al, byte[device.pci_bus] |
||
443 | jne @f |
||
444 | cmp ah, byte[device.pci_dev] |
||
445 | je .find_devicenum ; Device is already loaded, let's find it's device number |
||
446 | @@: |
||
447 | add esi, 4 |
||
448 | loop .nextdevice |
||
449 | |||
450 | |||
451 | .maybeboomerang: |
||
452 | mov ecx, [BOOMERANG_DEVICES] |
||
453 | test ecx, ecx |
||
454 | jz .firstdevice |
||
455 | |||
456 | mov esi, BOOMERANG_LIST |
||
457 | mov eax, [IOCTL.input] ; get the pci bus and device numbers |
||
458 | mov ax , [eax+1] ; |
||
459 | .nextdevice2: |
||
460 | mov ebx, [esi] |
||
461 | cmp al, byte[device.pci_bus] |
||
462 | jne @f |
||
463 | cmp ah, byte[device.pci_dev] |
||
464 | je .find_devicenum ; Device is already loaded, let's find it's device number |
||
465 | @@: |
||
466 | add esi, 4 |
||
467 | loop .nextdevice2 |
||
468 | |||
469 | |||
470 | ; This device doesnt have its own eth_device structure yet, lets create one |
||
471 | .firstdevice: |
||
472 | mov ecx, [BOOMERANG_DEVICES] |
||
473 | add ecx, [VORTEX_DEVICES] |
||
474 | cmp ecx, MAX_DEVICES ; First check if the driver can handle one more card |
||
475 | jae .fail |
||
476 | |||
477 | allocate_and_clear ebx, device.size, .fail ; Allocate the buffer for device structure |
||
478 | |||
479 | ; Fill in the direct call addresses into the struct |
||
480 | |||
481 | mov [device.reset], reset |
||
482 | mov [device.transmit], null_op |
||
483 | mov [device.unload], null_op |
||
484 | mov [device.name], my_service |
||
485 | |||
486 | ; save the pci bus and device numbers |
||
487 | |||
488 | mov eax, [IOCTL.input] |
||
489 | movzx ecx, byte[eax+1] |
||
490 | mov [device.pci_bus], ecx |
||
491 | movzx ecx, byte[eax+2] |
||
492 | mov [device.pci_dev], ecx |
||
493 | |||
494 | ; Now, it's time to find the base io addres of the PCI device |
||
495 | PCI_find_io |
||
496 | |||
497 | ; We've found the io address, find IRQ now |
||
498 | PCI_find_irq |
||
499 | |||
500 | DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ |
||
501 | [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4 |
||
502 | |||
503 | ; Ok, the eth_device structure is ready, let's probe the device |
||
504 | call probe ; this function will output in eax |
||
505 | test eax, eax |
||
506 | jnz .err ; If an error occured, exit |
||
507 | |||
508 | |||
509 | movzx ecx, [device.ver_id] |
||
510 | test word [hw_versions+2+ecx*4], IS_VORTEX |
||
511 | jz .not_vortex |
||
512 | |||
513 | mov eax, [VORTEX_DEVICES] ; Add the device structure to our device list |
||
514 | mov [VORTEX_LIST+4*eax], ebx ; (IRQ handler uses this list to find device) |
||
515 | inc [VORTEX_DEVICES] ; |
||
516 | |||
517 | .register: |
||
518 | mov [device.type], NET_TYPE_ETH |
||
519 | call NetRegDev |
||
520 | |||
521 | cmp eax, -1 |
||
522 | je .destroy |
||
523 | |||
524 | call start_device |
||
525 | ret |
||
526 | |||
527 | .not_vortex: |
||
528 | mov eax, [BOOMERANG_DEVICES] ; Add the device structure to our device list |
||
529 | mov [BOOMERANG_LIST+4*eax], ebx ; (IRQ handler uses this list to find device) |
||
530 | inc [BOOMERANG_DEVICES] |
||
531 | |||
532 | jmp .register |
||
533 | |||
534 | ; If the device was already loaded, find the device number and return it in eax |
||
535 | |||
536 | .find_devicenum: |
||
537 | DEBUGF 1,"Trying to find device number of already registered device\n" |
||
538 | call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
||
539 | ; into a device number in edi |
||
540 | mov eax, edi ; Application wants it in eax instead |
||
541 | DEBUGF 1,"Kernel says: %u\n", eax |
||
542 | ret |
||
543 | |||
544 | ; If an error occured, remove all allocated data and exit (returning -1 in eax) |
||
545 | |||
546 | .destroy: |
||
547 | ; todo: reset device into virgin state |
||
548 | |||
549 | .err: |
||
550 | stdcall KernelFree, ebx |
||
551 | |||
552 | |||
553 | .fail: |
||
554 | or eax, -1 |
||
555 | ret |
||
556 | |||
557 | ;------------------------------------------------------ |
||
558 | endp |
||
559 | |||
560 | |||
561 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
562 | ;; ;; |
||
563 | ;; Actual Hardware dependent code starts here ;; |
||
564 | ;; ;; |
||
565 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
566 | |||
567 | |||
568 | |||
569 | |||
570 | |||
571 | ;*************************************************************************** |
||
572 | ; Function |
||
573 | ; probe |
||
574 | ; Description |
||
575 | ; Searches for an ethernet card, enables it and clears the rx buffer |
||
576 | ; Destroyed registers |
||
577 | ; eax, ebx, ecx, edx, edi, esi |
||
578 | ; |
||
579 | ;*************************************************************************** |
||
580 | |||
581 | align 4 |
||
582 | probe: |
||
583 | |||
584 | DEBUGF 1,"Probing 3com card\n" |
||
585 | |||
586 | PCI_make_bus_master |
||
587 | |||
588 | ; wake up the card |
||
589 | call wake_up |
||
590 | |||
591 | stdcall PciRead32, [device.pci_bus], [device.pci_dev], 0 ; get device/vendor id |
||
592 | |||
593 | DEBUGF 1,"Vendor id: 0x%x\n", ax |
||
594 | |||
595 | cmp ax, 0x10B7 |
||
596 | jne .notfound |
||
597 | shr eax, 16 |
||
598 | |||
599 | DEBUGF 1,"Vendor ok!, device id: 0x%x\n", ax |
||
600 | |||
601 | ; get chip version |
||
602 | mov ecx, HW_VERSIONS_SIZE/4-1 |
||
603 | .loop: |
||
604 | cmp ax, [hw_versions+ecx*4] |
||
605 | jz .found |
||
606 | loop .loop |
||
607 | .notfound: |
||
3880 | hidnplayr | 608 | DEBUGF 2,"Device id not found in list!\n" |
3545 | hidnplayr | 609 | or eax, -1 |
610 | ret |
||
611 | .found: |
||
612 | mov esi, [hw_str+ecx*4] |
||
613 | DEBUGF 1,"Hardware type: %s\n", esi |
||
614 | mov [device.name], esi |
||
615 | |||
616 | mov [device.ver_id], cl |
||
617 | test word [hw_versions+2+ecx*4], HAS_HWCKSM |
||
618 | setnz [device.has_hwcksm] |
||
619 | ; set pci latency for vortex cards |
||
620 | test word [hw_versions+2+ecx*4], IS_VORTEX |
||
621 | jz .not_vortex |
||
622 | |||
623 | mov eax, 11111000b ; 248 = max latency |
||
624 | stdcall PciWrite32, [device.pci_bus], [device.pci_dev], PCI_REG_LATENCY, eax |
||
625 | |||
626 | .not_vortex: |
||
627 | ; set RX/TX functions |
||
628 | mov ax, EEPROM_REG_CAPABILITIES |
||
629 | call read_eeprom |
||
630 | test al, 100000b ; full bus master? |
||
631 | setnz [device.full_bus_master] |
||
632 | jnz .boomerang_func |
||
633 | mov [device.transmit], vortex_transmit |
||
3880 | hidnplayr | 634 | DEBUGF 2,"Device is a vortex type\n" |
635 | DEBUGF 2,"I'm sorry but vortex code hasnt been tested yet\n" |
||
636 | DEBUGF 2,"Please contact me on hidnplayr@kolibrios.org\n" |
||
637 | DEBUGF 2,"If you can help me finish it!\n" |
||
3545 | hidnplayr | 638 | or eax, -1 |
639 | ret |
||
640 | jmp @f |
||
641 | .boomerang_func: ; full bus master, so use boomerang functions |
||
642 | mov [device.transmit], boomerang_transmit |
||
643 | DEBUGF 1,"Device is a boomerang type\n" |
||
644 | @@: |
||
645 | call read_mac_eeprom |
||
646 | |||
647 | test byte [device.full_bus_master], 0xff |
||
648 | jz .set_preamble |
||
649 | ; switch to register window 2 |
||
650 | set_io 0 |
||
651 | set_io REG_COMMAND |
||
652 | mov ax, SELECT_REGISTER_WINDOW+2 |
||
653 | out dx, ax |
||
654 | ; activate xcvr by setting some magic bits |
||
655 | set_io REG_RESET_OPTIONS |
||
656 | in ax, dx |
||
657 | and ax, not 0x4010 |
||
658 | movzx ecx, [device.ver_id] |
||
659 | test word [ecx*4+hw_versions+2], INVERT_LED_PWR |
||
660 | jz @f |
||
661 | or al, 0x10 |
||
662 | @@: |
||
663 | test word [ecx*4+hw_versions+2], INVERT_MII_PWR |
||
664 | jz @f |
||
665 | or ah, 0x40 |
||
666 | @@: |
||
667 | out dx, ax |
||
668 | .set_preamble: |
||
669 | ; use preamble as default |
||
670 | mov byte [device.preamble], 1 ; enable preamble |
||
671 | |||
672 | call global_reset |
||
673 | |||
674 | ;-------------------------- |
||
675 | ; RESET |
||
676 | |||
677 | align 4 |
||
678 | reset: |
||
679 | |||
680 | movzx eax, [device.irq_line] |
||
681 | DEBUGF 1,"Attaching int handler to irq %x\n",eax:1 |
||
682 | |||
683 | movzx ecx, [device.ver_id] |
||
684 | test word [hw_versions+2+ecx*4], IS_VORTEX |
||
685 | jz .not_vortex |
||
686 | |||
687 | mov esi, int_vortex |
||
688 | jmp .reg_int |
||
689 | |||
690 | .not_vortex: |
||
691 | mov esi, int_boomerang |
||
692 | |||
693 | .reg_int: |
||
694 | stdcall AttachIntHandler, eax, esi, dword 0 |
||
695 | test eax, eax |
||
696 | jnz @f |
||
3880 | hidnplayr | 697 | DEBUGF 2,"Could not attach int handler!\n" |
3545 | hidnplayr | 698 | ; or eax, -1 |
699 | ; ret |
||
700 | @@: |
||
701 | |||
702 | set_io 0 |
||
703 | set_io REG_COMMAND |
||
704 | mov ax, SELECT_REGISTER_WINDOW + 0 |
||
705 | out dx, ax |
||
706 | |||
707 | mov ax, StopCoax |
||
708 | out dx, ax ; stop transceiver |
||
709 | |||
710 | mov ax, SELECT_REGISTER_WINDOW + 4 |
||
711 | out dx, ax ; disable UTP |
||
712 | |||
713 | set_io REG_MEDIA_STATUS |
||
714 | mov ax, 0x0 |
||
715 | |||
716 | set_io REG_COMMAND |
||
717 | mov ax, SELECT_REGISTER_WINDOW + 0 |
||
718 | out dx, ax |
||
719 | |||
720 | set_io REG_FIFO_DIAGNOSTIC |
||
721 | mov ax, 0 |
||
722 | out dx, ax ; disable card |
||
723 | |||
724 | mov ax, 1 |
||
725 | out dx, ax ; enable card |
||
726 | |||
727 | call write_mac |
||
728 | |||
729 | |||
730 | ;<<<<<<<<<<<<<< |
||
731 | |||
732 | set_io REG_COMMAND |
||
733 | mov ax, SELECT_REGISTER_WINDOW + 1 |
||
734 | out dx, ax |
||
735 | |||
736 | mov ecx, 32 |
||
737 | set_io 0x0b |
||
738 | .loop: |
||
739 | in al, dx |
||
740 | loop .loop |
||
741 | |||
742 | ; Get rid of stray ints |
||
743 | set_io REG_COMMAND |
||
744 | mov ax, AckIntr + 0xff |
||
745 | out dx, ax |
||
746 | |||
747 | mov ax, SetStatusEnb + S_5_INTS |
||
748 | out dx, ax |
||
749 | |||
750 | mov ax, SetIntrEnb + S_5_INTS |
||
751 | out dx, ax |
||
752 | |||
753 | call set_rx_mode |
||
754 | call set_active_port |
||
755 | |||
756 | ;>>>>>>>>>> |
||
757 | |||
758 | call create_rx_ring |
||
759 | call rx_reset |
||
760 | call tx_reset |
||
761 | |||
762 | ;>>>>>>>>>>>>>>>>>> |
||
763 | |||
764 | xor eax, eax |
||
765 | ; clear packet/byte counters |
||
766 | |||
767 | lea edi, [device.bytes_tx] |
||
768 | mov ecx, 6 |
||
769 | rep stosd |
||
770 | |||
771 | ; Set the mtu, kernel will be able to send now |
||
772 | mov [device.mtu], 1514 |
||
773 | |||
774 | ret |
||
775 | |||
776 | |||
777 | |||
778 | |||
779 | |||
780 | align 4 |
||
781 | start_device: |
||
782 | DEBUGF 1,"Starting the device\n" |
||
783 | |||
784 | set_io 0 |
||
785 | set_io REG_COMMAND |
||
786 | mov ax, SetTxThreshold + 60 ;2047 ; recommended by the manual :) |
||
787 | out dx, ax |
||
788 | |||
789 | call check_tx_status |
||
790 | |||
791 | set_io 0 |
||
792 | set_io REG_COMMAND |
||
793 | ; switch to register window 4 |
||
794 | mov ax, SELECT_REGISTER_WINDOW+4 |
||
795 | out dx, ax |
||
796 | |||
797 | ; wait for linkDetect |
||
798 | set_io REG_MEDIA_STATUS |
||
799 | mov ecx, 20 ; wait for max 2s |
||
800 | .link_detect_loop: |
||
801 | mov esi, 100 |
||
802 | call Sleep ; 100 ms |
||
803 | in ax, dx |
||
804 | test ah, 1000b ; linkDetect |
||
805 | jnz @f |
||
806 | loop .link_detect_loop |
||
3880 | hidnplayr | 807 | DEBUGF 2,"Link detect timed-out!\n" |
3545 | hidnplayr | 808 | @@: |
809 | |||
810 | ; print link type |
||
811 | xor eax, eax |
||
812 | bsr ax, word [device.state] |
||
813 | jz @f |
||
814 | sub ax, 4 |
||
815 | @@: |
||
816 | |||
817 | mov esi, [link_str+eax*4] |
||
818 | DEBUGF 1,"Established Link type: %s\n", esi |
||
819 | |||
820 | ; enable interrupts |
||
821 | |||
822 | set_io REG_COMMAND |
||
823 | mov ax, SELECT_REGISTER_WINDOW + 1 |
||
824 | out dx, ax |
||
825 | |||
826 | mov ax, AckIntr + 0xff |
||
827 | out dx, ax |
||
828 | |||
829 | mov ax, SetStatusEnb + S_5_INTS |
||
830 | out dx, ax |
||
831 | |||
832 | mov ax, SetIntrEnb + S_5_INTS |
||
833 | out dx, ax |
||
834 | |||
835 | ; Start RX/TX |
||
836 | |||
837 | set_io 0 |
||
838 | set_io REG_COMMAND |
||
839 | mov ax, RxEnable |
||
840 | out dx, ax |
||
841 | |||
842 | mov ax, TxEnable |
||
843 | out dx, ax |
||
844 | |||
845 | set_io REG_COMMAND |
||
846 | mov ax, SetRxThreshold + 208 |
||
847 | out dx, ax |
||
848 | |||
849 | mov ax, SetTxThreshold + 60 ;16 ; recommended by the manual :) |
||
850 | out dx, ax |
||
851 | |||
852 | mov ax, SELECT_REGISTER_WINDOW + 1 |
||
853 | out dx, ax |
||
854 | |||
855 | ret |
||
856 | |||
857 | |||
858 | |||
859 | |||
860 | |||
861 | |||
862 | |||
863 | align 4 |
||
864 | set_rx_mode: |
||
865 | |||
866 | DEBUGF 1,"Setting RX mode\n" |
||
867 | |||
868 | set_io 0 |
||
869 | set_io REG_COMMAND |
||
870 | |||
871 | if defined PROMISCIOUS |
||
872 | mov ax, SetRxFilter + RxStation + RxMulticast + RxBroadcast + RxProm |
||
873 | else if defined ALLMULTI |
||
874 | mov ax, SetRxFilter + RxStation + RxMulticast + RxBroadcast |
||
875 | else |
||
876 | mov ax, SetRxFilter + RxStation + RxBroadcast |
||
877 | end if |
||
878 | out dx, ax |
||
879 | |||
880 | ret |
||
881 | |||
882 | |||
883 | |||
884 | |||
885 | |||
886 | ;*************************************************************************** |
||
887 | ; Function |
||
888 | ; global_reset |
||
889 | ; Description |
||
890 | ; resets the device |
||
891 | ; Parameters: |
||
3880 | hidnplayr | 892 | ; |
3545 | hidnplayr | 893 | ; Return value: |
894 | ; Destroyed registers |
||
895 | ; ax, ecx, edx, esi |
||
896 | ; |
||
897 | ;***************************************************************************1 |
||
898 | |||
899 | align 4 |
||
900 | global_reset: |
||
901 | |||
902 | DEBUGF 1,"Global reset..\n" |
||
903 | |||
904 | ; GlobalReset |
||
905 | set_io 0 |
||
906 | set_io REG_COMMAND |
||
907 | xor eax, eax |
||
908 | ; or al, 0x14 |
||
909 | out dx, ax |
||
910 | ; wait for GlobalReset to complete |
||
911 | mov ecx, 64000 |
||
912 | .loop: |
||
913 | in ax , dx |
||
914 | test ah , 10000b ; check CmdInProgress |
||
915 | loopz .loop |
||
916 | |||
917 | DEBUGF 1,"Waiting for nic to boot..\n" |
||
918 | ; wait for 2 seconds for NIC to boot |
||
919 | mov esi, 2000 |
||
920 | call Sleep ; 2 seconds |
||
921 | |||
922 | DEBUGF 1,"Ok!\n" |
||
923 | |||
924 | ret |
||
925 | |||
926 | |||
927 | |||
928 | ;*************************************************************************** |
||
929 | ; Function |
||
930 | ; tx_reset |
||
931 | ; Description |
||
932 | ; resets and enables transmitter engine |
||
933 | ; |
||
934 | ;*************************************************************************** |
||
935 | |||
936 | align 4 |
||
937 | tx_reset: |
||
938 | DEBUGF 1,"tx reset\n" |
||
939 | |||
940 | ; TxReset |
||
941 | set_io 0 |
||
942 | set_io REG_COMMAND |
||
943 | mov ax, TxReset |
||
944 | out dx, ax |
||
945 | ; Wait for TxReset to complete |
||
946 | mov ecx, 200000 |
||
947 | .tx_reset_loop: |
||
948 | in ax, dx |
||
949 | test ah, 10000b ; check CmdInProgress |
||
950 | jz .tx_set_prev |
||
951 | dec ecx |
||
952 | jnz .tx_reset_loop |
||
953 | .tx_set_prev: |
||
954 | ; init last_dpd |
||
955 | lea eax, [device.dpd_buffer + (NUM_TX_DESC-1)*dpd.size] |
||
956 | mov [device.prev_dpd], eax |
||
957 | |||
958 | .tx_enable: |
||
959 | ret |
||
960 | |||
961 | |||
962 | |||
963 | ;*************************************************************************** |
||
964 | ; Function |
||
965 | ; rx_reset |
||
966 | ; Description |
||
967 | ; resets and enables receiver engine |
||
968 | ; |
||
969 | ;*************************************************************************** |
||
970 | |||
971 | align 4 |
||
972 | rx_reset: |
||
973 | |||
974 | DEBUGF 1,"rx reset\n" |
||
975 | |||
976 | set_io 0 |
||
977 | set_io REG_COMMAND |
||
978 | mov ax, RxReset or 0x4 |
||
979 | out dx, ax |
||
980 | |||
981 | ; wait for RxReset to complete |
||
982 | mov ecx, 200000 |
||
983 | .loop: |
||
984 | in ax, dx |
||
985 | test ah, 10000b ; check CmdInProgress |
||
986 | jz .done |
||
987 | dec ecx |
||
988 | jnz .loop |
||
989 | .done: |
||
990 | |||
991 | lea eax, [device.upd_buffer] |
||
992 | mov [device.curr_upd], eax |
||
993 | GetRealAddr |
||
994 | set_io 0 |
||
995 | set_io REG_UP_LIST_PTR |
||
996 | out dx, eax |
||
997 | |||
998 | .rx_enable: |
||
999 | ret |
||
1000 | |||
1001 | |||
1002 | align 4 |
||
1003 | create_rx_ring: |
||
1004 | ; create upd ring |
||
1005 | lea eax, [device.upd_buffer] |
||
1006 | GetRealAddr |
||
1007 | mov edi, eax ; real addr of first descr |
||
1008 | |||
1009 | lea esi, [device.upd_buffer] ; ptr to first descr |
||
1010 | lea edx, [device.upd_buffer + (NUM_RX_DESC-1)*upd.size] ; ptr to last descr |
||
1011 | |||
1012 | mov ecx, NUM_RX_DESC |
||
1013 | |||
1014 | .upd_loop: |
||
1015 | mov [edx + upd.next_ptr], edi |
||
1016 | |||
1017 | push ecx edx |
||
1018 | stdcall KernelAlloc, MAX_ETH_FRAME_SIZE |
||
1019 | pop edx ecx |
||
1020 | mov [esi + upd.realaddr], eax |
||
1021 | call GetPgAddr |
||
1022 | mov [esi + upd.frag_addr], eax |
||
1023 | and [esi + upd.pkt_status], 0 |
||
1024 | mov [esi + upd.frag_len], MAX_ETH_FRAME_SIZE or (1 shl 31) |
||
1025 | |||
1026 | DEBUGF 1,"UPD: lin=%x phys=%x len=%x next ptr=%x\n", [esi+upd.realaddr]:8, [esi+upd.frag_addr]:8, [esi+upd.frag_len]:8, edi |
||
1027 | DEBUGF 1,"UPD: cur=%x prev=%x\n", esi, edx |
||
1028 | |||
1029 | mov edx, esi |
||
1030 | add esi, upd.size |
||
1031 | add edi, upd.size |
||
1032 | dec ecx |
||
1033 | jnz .upd_loop |
||
1034 | |||
1035 | ret |
||
1036 | |||
1037 | |||
1038 | |||
1039 | ;--------------------------------------------------------------------------- |
||
1040 | ; Function |
||
1041 | ; try_link_detect |
||
1042 | ; Description |
||
1043 | ; try_link_detect checks if link exists |
||
1044 | ; Parameters |
||
1045 | ; ebx = device structure |
||
1046 | ; Return value |
||
1047 | ; al - 0 ; no link detected |
||
1048 | ; al - 1 ; link detected |
||
1049 | ; Destroyed registers |
||
1050 | ; eax, ebx, ecx, edx, edi, esi |
||
1051 | ; |
||
1052 | ;--------------------------------------------------------------------------- |
||
1053 | |||
1054 | align 4 |
||
1055 | try_link_detect: |
||
1056 | |||
1057 | DEBUGF 1,"trying to detect link\n" |
||
1058 | |||
1059 | ; create self-directed packet |
||
1060 | stdcall KernelAlloc, 20 ; create a buffer for the self-directed packet |
||
1061 | test eax, eax |
||
1062 | jz .fail |
||
1063 | |||
1064 | pushd 20 ; Packet parameters for device.transmit |
||
1065 | push eax ; |
||
1066 | |||
1067 | mov edi, eax |
||
1068 | |||
1069 | lea esi, [device.mac] |
||
1070 | movsw |
||
1071 | movsd |
||
1072 | sub esi, 6 |
||
1073 | movsw |
||
1074 | movsd |
||
1075 | mov ax , 0x0608 |
||
1076 | stosw |
||
1077 | |||
1078 | ; download self-directed packet |
||
1079 | call [device.transmit] |
||
1080 | |||
1081 | ; switch to register window 4 |
||
1082 | set_io 0 |
||
1083 | set_io REG_COMMAND |
||
1084 | mov ax, SELECT_REGISTER_WINDOW+4 |
||
1085 | out dx, ax |
||
1086 | |||
1087 | ; See if we have received the packet by now.. |
||
1088 | cmp [device.packets_rx], 0 |
||
1089 | jnz .link_detected |
||
1090 | |||
1091 | ; switch to register window 4 |
||
1092 | set_io REG_COMMAND |
||
1093 | mov ax, SELECT_REGISTER_WINDOW+4 |
||
1094 | out dx, ax |
||
1095 | |||
1096 | ; read linkbeatdetect |
||
1097 | set_io REG_MEDIA_STATUS |
||
1098 | in ax, dx |
||
1099 | test ah, 1000b ; test linkBeatDetect |
||
1100 | jnz .link_detected |
||
1101 | xor al, al |
||
1102 | jmp .finish |
||
1103 | |||
1104 | .link_detected: |
||
1105 | DEBUGF 1,"link detected!\n" |
||
1106 | setb al |
||
1107 | |||
1108 | .finish: |
||
1109 | test al, al |
||
1110 | jz @f |
||
1111 | or byte [device.state+1], 100b |
||
1112 | @@: |
||
1113 | ret |
||
1114 | |||
1115 | .fail: |
||
1116 | ret |
||
1117 | |||
1118 | |||
1119 | |||
1120 | ;*************************************************************************** |
||
1121 | ; Function |
||
1122 | ; try_phy |
||
1123 | ; Description |
||
1124 | ; try_phy checks the auto-negotiation function |
||
1125 | ; in the PHY at PHY index. It can also be extended to |
||
1126 | ; include link detection for non-IEEE 802.3u |
||
1127 | ; auto-negotiation devices, for instance the BCM5000. ; TODO: BCM5000 |
||
1128 | ; Parameters |
||
1129 | ; ah - PHY index |
||
1130 | ; ebx - device stucture |
||
1131 | ; Return value |
||
1132 | ; al - 0 link is auto-negotiated |
||
1133 | ; al - 1 no link is auto-negotiated |
||
1134 | ; Destroyed registers |
||
1135 | ; eax, ebx, ecx, edx, esi |
||
1136 | ; |
||
1137 | ;*************************************************************************** |
||
1138 | |||
1139 | align 4 |
||
1140 | try_phy: |
||
1141 | |||
1142 | DEBUGF 1,"PHY=%u\n", ah |
||
1143 | DEBUGF 1,"Detecting if device is auto-negotiation capable\n" |
||
1144 | |||
1145 | mov al, REG_MII_BMCR |
||
1146 | push eax |
||
1147 | call mdio_read ; returns with window #4 |
||
1148 | or ah , 0x80 ; software reset |
||
1149 | mov esi, eax |
||
1150 | mov eax, dword [esp] |
||
1151 | call mdio_write ; returns with window #4 |
||
1152 | |||
1153 | ; wait for reset to complete |
||
1154 | mov esi, 2000 |
||
1155 | stdcall Sleep ; 2s |
||
1156 | mov eax, [esp] |
||
1157 | call mdio_read ; returns with window #4 |
||
1158 | test ah , 0x80 |
||
1159 | jnz .fail1 |
||
1160 | mov eax, [esp] |
||
1161 | |||
1162 | ; wait for a while after reset |
||
1163 | mov esi, 20 |
||
1164 | stdcall Sleep ; 20ms |
||
1165 | mov eax, [esp] |
||
1166 | mov al , REG_MII_BMSR |
||
1167 | call mdio_read ; returns with window #4 |
||
1168 | test al , 1 ; extended capability supported? |
||
1169 | jz .fail2 |
||
1170 | |||
1171 | ; auto-neg capable? |
||
1172 | test al , 1000b |
||
1173 | jz .fail2 ; not auto-negotiation capable |
||
1174 | |||
1175 | DEBUGF 1,"Device is auto-negotiation capable\n" |
||
1176 | |||
1177 | ; auto-neg complete? |
||
1178 | test al , 100000b |
||
1179 | jnz .auto_neg_ok |
||
1180 | |||
1181 | DEBUGF 1,"Restarting auto-negotiation\n" |
||
1182 | |||
1183 | ; restart auto-negotiation |
||
1184 | mov eax, [esp] |
||
1185 | mov al , REG_MII_ANAR |
||
1186 | push eax |
||
1187 | call mdio_read ; returns with window #4 |
||
1188 | or ax , 1111b shl 5; advertise only 10base-T and 100base-TX |
||
1189 | mov esi, eax |
||
1190 | pop eax |
||
1191 | call mdio_write ; returns with window #4 |
||
1192 | mov eax, [esp] |
||
1193 | call mdio_read ; returns with window #4 |
||
1194 | mov esi, eax |
||
1195 | or bh , 10010b ; restart auto-negotiation |
||
1196 | mov eax, [esp] |
||
1197 | call mdio_write ; returns with window #4 |
||
1198 | mov esi, 4000 |
||
1199 | stdcall Sleep ; 4 seconds |
||
1200 | mov eax, [esp] |
||
1201 | mov al , REG_MII_BMSR |
||
1202 | call mdio_read ; returns with window #4 |
||
1203 | test al , 100000b ; auto-neg complete? |
||
1204 | jnz .auto_neg_ok |
||
1205 | jmp .fail3 |
||
1206 | .auto_neg_ok: |
||
1207 | |||
1208 | DEBUGF 1,"Auto-negotiation complete\n" |
||
1209 | |||
1210 | ; compare advertisement and link partner ability registers |
||
1211 | mov eax, [esp] |
||
1212 | mov al , REG_MII_ANAR |
||
1213 | call mdio_read ; returns with window #4 |
||
1214 | xchg eax, [esp] |
||
1215 | mov al , REG_MII_ANLPAR |
||
1216 | call mdio_read ; returns with window #4 |
||
1217 | pop esi |
||
1218 | and eax, esi |
||
1219 | and eax, 1111100000b |
||
1220 | push eax |
||
1221 | |||
1222 | mov word[device.state+2], ax |
||
1223 | |||
1224 | ; switch to register window 3 |
||
1225 | set_io 0 |
||
1226 | set_io REG_COMMAND |
||
1227 | mov ax , SELECT_REGISTER_WINDOW+3 |
||
1228 | out dx , ax |
||
1229 | |||
1230 | ; set full-duplex mode |
||
1231 | set_io REG_MAC_CONTROL |
||
1232 | in ax , dx |
||
1233 | and ax , not 0x120 ; clear full duplex and flow control |
||
1234 | pop esi |
||
1235 | test esi, 1010b shl 5; check for full-duplex |
||
1236 | jz .half_duplex |
||
1237 | or ax , 0x120 ; set full duplex and flow control |
||
1238 | .half_duplex: |
||
1239 | DEBUGF 1,"Using half-duplex\n" |
||
1240 | out dx , ax |
||
1241 | mov al , 1 |
||
1242 | ret |
||
1243 | |||
1244 | |||
1245 | .fail1: |
||
3880 | hidnplayr | 1246 | DEBUGF 2,"reset failed!\n" |
3545 | hidnplayr | 1247 | pop eax |
1248 | xor al, al |
||
1249 | ret |
||
1250 | |||
1251 | .fail2: |
||
3880 | hidnplayr | 1252 | DEBUGF 2,"This device is not auto-negotiation capable!\n" |
3545 | hidnplayr | 1253 | pop eax |
1254 | xor al, al |
||
1255 | ret |
||
1256 | |||
1257 | .fail3: |
||
3880 | hidnplayr | 1258 | DEBUGF 2,"auto-negotiation reset failed!\n" |
3545 | hidnplayr | 1259 | pop eax |
1260 | xor al, al |
||
1261 | ret |
||
1262 | |||
1263 | |||
1264 | |||
1265 | ;*************************************************************************** |
||
1266 | ; Function |
||
1267 | ; try_mii |
||
1268 | ; Description |
||
1269 | ; try_MII checks the on-chip auto-negotiation logic |
||
1270 | ; or an off-chip MII PHY, depending upon what is set in |
||
1271 | ; xcvrSelect by the caller. |
||
1272 | ; It exits when it finds the first device with a good link. |
||
1273 | ; Parameters |
||
3880 | hidnplayr | 1274 | ; |
3545 | hidnplayr | 1275 | ; Return value |
1276 | ; al - 0 |
||
1277 | ; al - 1 |
||
1278 | ; Destroyed registers |
||
1279 | ; eax, ebx, ecx, edx, esi |
||
1280 | ; |
||
1281 | ;*************************************************************************** |
||
1282 | |||
1283 | align 4 |
||
1284 | try_mii: |
||
1285 | |||
1286 | DEBUGF 1,"trying to find MII PHY\n" |
||
1287 | |||
1288 | ; switch to register window 3 |
||
1289 | set_io 0 |
||
1290 | set_io REG_COMMAND |
||
1291 | mov ax, SELECT_REGISTER_WINDOW+3 |
||
1292 | out dx, ax |
||
1293 | set_io REG_INTERNAL_CONFIG |
||
1294 | in eax, dx |
||
1295 | and eax, (1111b shl 20) |
||
1296 | cmp eax, (1000b shl 20) ; is auto-negotiation set? |
||
1297 | jne .mii_device |
||
1298 | |||
1299 | DEBUGF 1,"auto-negotiation is set\n" |
||
1300 | ; switch to register window 4 |
||
1301 | set_io REG_COMMAND |
||
1302 | mov ax , SELECT_REGISTER_WINDOW+4 |
||
1303 | out dx , ax |
||
1304 | |||
1305 | ; PHY==24 is the on-chip auto-negotiation logic |
||
1306 | ; it supports only 10base-T and 100base-TX |
||
1307 | mov ah , 24 |
||
1308 | call try_phy |
||
1309 | test al , al |
||
1310 | jz .fail_finish |
||
1311 | |||
1312 | mov cl , 24 |
||
1313 | jmp .check_preamble |
||
1314 | |||
1315 | .mii_device: |
||
1316 | cmp eax, (0110b shl 20) |
||
1317 | jne .fail_finish |
||
1318 | |||
1319 | set_io 0 |
||
1320 | set_io REG_COMMAND |
||
1321 | mov ax , SELECT_REGISTER_WINDOW+4 |
||
1322 | out dx , ax |
||
1323 | |||
1324 | set_io REG_PHYSICAL_MGMT |
||
1325 | in ax , dx |
||
1326 | and al , (1 shl BIT_MGMT_DIR) or (1 shl BIT_MGMT_DATA) |
||
1327 | cmp al , (1 shl BIT_MGMT_DATA) |
||
1328 | je .search_for_phy |
||
1329 | |||
1330 | xor al , al |
||
1331 | ret |
||
1332 | |||
1333 | .search_for_phy: |
||
1334 | ; search for PHY |
||
1335 | mov cx , 31 |
||
1336 | .search_phy_loop: |
||
1337 | DEBUGF 1,"Searching the PHY\n" |
||
1338 | cmp cx , 24 |
||
1339 | je .next_phy |
||
1340 | mov ah , cl ; ah = phy |
||
1341 | mov al , REG_MII_BMCR ; al = Basic Mode Status Register |
||
1342 | push cx |
||
1343 | call mdio_read |
||
1344 | pop cx |
||
1345 | test ax , ax |
||
1346 | jz .next_phy |
||
1347 | cmp ax , 0xffff |
||
1348 | je .next_phy |
||
1349 | mov ah , cl ; ah = phy |
||
1350 | push cx |
||
1351 | call try_phy |
||
1352 | pop cx |
||
1353 | test al , al |
||
1354 | jnz .check_preamble |
||
1355 | .next_phy: |
||
1356 | loopw .search_phy_loop |
||
1357 | |||
1358 | .fail_finish: |
||
1359 | xor al, al |
||
1360 | ret |
||
1361 | |||
1362 | ; epilog |
||
1363 | .check_preamble: |
||
1364 | DEBUGF 1,"Using PHY: %u\nChecking PreAmble\n", cl |
||
1365 | push eax ; eax contains the return value of try_phy |
||
1366 | ; check hard coded preamble forcing |
||
1367 | movzx eax, [device.ver_id] |
||
1368 | test word [eax*4+hw_versions+2], EXTRA_PREAMBLE |
||
1369 | setnz [device.preamble] ; force preamble |
||
1370 | jnz .finish |
||
1371 | |||
1372 | ; check mii for preamble suppression |
||
1373 | mov ah, cl |
||
1374 | mov al, REG_MII_BMSR |
||
1375 | call mdio_read |
||
1376 | test al, 1000000b ; preamble suppression? |
||
1377 | setz [device.preamble] ; no |
||
1378 | |||
1379 | .finish: |
||
1380 | pop eax |
||
1381 | ret |
||
1382 | |||
1383 | |||
1384 | |||
1385 | ;*************************************************************************** |
||
1386 | ; Function |
||
1387 | ; test_packet |
||
1388 | ; Description |
||
1389 | ; try_loopback try a loopback packet for 10BASE2 or AUI port |
||
1390 | ; Parameters |
||
1391 | ; ebx = device structure |
||
1392 | ; |
||
1393 | ;*************************************************************************** |
||
1394 | |||
1395 | align 4 |
||
1396 | test_packet: |
||
1397 | |||
1398 | DEBUGF 1,"sending test packet\n" |
||
1399 | |||
1400 | ; switch to register window 3 |
||
1401 | set_io 0 |
||
1402 | set_io REG_COMMAND |
||
1403 | mov ax, SELECT_REGISTER_WINDOW+3 |
||
1404 | out dx, ax |
||
1405 | |||
1406 | ; set fullDuplexEnable in MacControl register |
||
1407 | set_io REG_MAC_CONTROL |
||
1408 | in ax, dx |
||
1409 | or ax, 0x120 |
||
1410 | out dx, ax |
||
1411 | |||
1412 | ; switch to register window 5 |
||
1413 | set_io REG_COMMAND |
||
1414 | mov ax, SELECT_REGISTER_WINDOW+5 |
||
1415 | out dx, ax |
||
1416 | |||
1417 | ; set RxFilter to enable individual address matches |
||
1418 | mov ax, (10000b shl 11) |
||
1419 | set_io REG_RX_FILTER |
||
1420 | in al, dx |
||
1421 | or al, 1 |
||
1422 | set_io REG_COMMAND |
||
1423 | out dx, ax |
||
1424 | |||
1425 | ; issue RxEnable and TxEnable |
||
1426 | call rx_reset |
||
1427 | call tx_reset |
||
1428 | |||
1429 | ; create self-directed packet |
||
1430 | stdcall KernelAlloc, 20 ; create a buffer for the self-directed packet |
||
1431 | test eax, eax |
||
1432 | jz .fail |
||
1433 | |||
1434 | pushd 20 ; Packet parameters for device.transmit |
||
1435 | push eax ; |
||
1436 | |||
1437 | mov edi, eax |
||
1438 | lea esi, [device.mac] |
||
1439 | movsw |
||
1440 | movsd |
||
1441 | sub esi, 6 |
||
1442 | movsw |
||
1443 | movsd |
||
1444 | mov ax , 0x0608 |
||
1445 | stosw |
||
1446 | |||
1447 | ; download self-directed packet |
||
1448 | call [device.transmit] |
||
1449 | |||
1450 | ; wait for 2s |
||
1451 | mov esi, 2000 |
||
1452 | call Sleep |
||
1453 | |||
1454 | ; check if self-directed packet is received |
||
1455 | mov eax, [device.packets_rx] |
||
1456 | test eax, eax |
||
1457 | jnz .finish |
||
1458 | |||
1459 | ; switch to register window 3 |
||
1460 | set_io 0 |
||
1461 | set_io REG_COMMAND |
||
1462 | mov ax, SELECT_REGISTER_WINDOW+3 |
||
1463 | out dx, ax |
||
1464 | |||
1465 | ; clear fullDuplexEnable in MacControl register |
||
1466 | set_io REG_MAC_CONTROL |
||
1467 | in ax , dx |
||
1468 | and ax , not 0x120 |
||
1469 | out dx , ax |
||
1470 | .fail: |
||
1471 | xor eax, eax |
||
1472 | |||
1473 | .finish: |
||
1474 | ret |
||
1475 | |||
1476 | |||
1477 | |||
1478 | ;*************************************************************************** |
||
1479 | ; Function |
||
1480 | ; try_loopback |
||
1481 | ; Description |
||
1482 | ; tries a loopback packet for 10BASE2 or AUI port |
||
1483 | ; Parameters |
||
1484 | ; al - 0: 10Mbps AUI connector |
||
1485 | ; 1: 10BASE-2 |
||
3880 | hidnplayr | 1486 | ; |
3545 | hidnplayr | 1487 | ; Return value |
1488 | ; al - 0 |
||
1489 | ; al - 1 |
||
1490 | ; Destroyed registers |
||
1491 | ; eax, ebx, ecx, edx, edi, esi |
||
1492 | ; |
||
1493 | ;*************************************************************************** |
||
1494 | |||
1495 | align 4 |
||
1496 | try_loopback: |
||
1497 | |||
1498 | DEBUGF 1,"trying loopback\n" |
||
1499 | |||
1500 | push eax |
||
1501 | ; switch to register window 3 |
||
1502 | set_io 0 |
||
1503 | set_io REG_COMMAND |
||
1504 | mov ax, SELECT_REGISTER_WINDOW+3 |
||
1505 | out dx, ax |
||
1506 | mov eax, [esp] |
||
1507 | |||
1508 | mov cl, al |
||
1509 | inc cl |
||
1510 | shl cl, 3 |
||
1511 | or byte [device.state+1], cl |
||
1512 | |||
1513 | test al, al ; aui or coax? |
||
1514 | jz .complete_loopback |
||
1515 | ; enable 100BASE-2 DC-DC converter |
||
1516 | mov ax, (10b shl 11) ; EnableDcConverter |
||
1517 | out dx, ax |
||
1518 | .complete_loopback: |
||
1519 | |||
1520 | mov cx, 2 ; give a port 3 chances to complete a loopback |
||
1521 | .next_try: |
||
1522 | push ecx |
||
1523 | call test_packet |
||
1524 | pop ecx |
||
1525 | test eax, eax |
||
1526 | loopzw .next_try |
||
1527 | |||
1528 | .finish: |
||
1529 | xchg eax, [esp] |
||
1530 | test al, al |
||
1531 | jz .aui_finish |
||
1532 | |||
1533 | ; issue DisableDcConverter command |
||
1534 | set_io 0 |
||
1535 | set_io REG_COMMAND |
||
1536 | mov ax, (10111b shl 11) |
||
1537 | out dx, ax |
||
1538 | .aui_finish: |
||
1539 | pop eax ; al contains the result of operation |
||
1540 | |||
1541 | test al, al |
||
1542 | jnz @f |
||
1543 | and byte [device.state+1], not 11000b |
||
1544 | @@: |
||
1545 | |||
1546 | ret |
||
1547 | |||
1548 | |||
1549 | ;*************************************************************************** |
||
1550 | ; Function |
||
1551 | ; set_active_port |
||
1552 | ; Description |
||
1553 | ; It selects the media port (transceiver) to be used |
||
1554 | ; Return value: |
||
1555 | ; Destroyed registers |
||
1556 | ; eax, ebx, ecx, edx, edi, esi |
||
1557 | ; |
||
1558 | ;*************************************************************************** |
||
1559 | |||
1560 | align 4 |
||
1561 | set_active_port: |
||
1562 | |||
1563 | DEBUGF 1,"Trying to find the active port\n" |
||
1564 | |||
1565 | ; switch to register window 3 |
||
1566 | set_io 0 |
||
1567 | set_io REG_COMMAND |
||
1568 | mov ax, SELECT_REGISTER_WINDOW + 3 |
||
1569 | out dx, ax |
||
1570 | |||
1571 | set_io REG_INTERNAL_CONFIG |
||
1572 | in eax, dx |
||
1573 | test eax, (1 shl 24) ; check if autoselect enable |
||
1574 | jz .set_first_available_media |
||
1575 | |||
1576 | ; check 100BASE-TX and 10BASE-T |
||
1577 | set_io REG_MEDIA_OPTIONS |
||
1578 | in ax, dx |
||
1579 | test al, 1010b ; check whether 100BASE-TX or 10BASE-T available |
||
1580 | jz .mii_device ; they are not available |
||
1581 | |||
1582 | ; set auto-negotiation |
||
1583 | set_io REG_INTERNAL_CONFIG |
||
1584 | in eax, dx |
||
1585 | and eax, not (1111b shl 20) |
||
1586 | or eax, (1000b shl 20) |
||
1587 | out dx, eax |
||
1588 | call try_mii |
||
1589 | test al, al |
||
1590 | jz .mii_device |
||
1591 | DEBUGF 1,"Using auto negotiation\n" |
||
1592 | ret |
||
1593 | |||
1594 | .mii_device: |
||
1595 | ; switch to register window 3 |
||
1596 | set_io 0 |
||
1597 | ; check for off-chip mii device |
||
1598 | set_io REG_MEDIA_OPTIONS |
||
1599 | in ax, dx |
||
1600 | test al, 1000000b ; check miiDevice |
||
1601 | jz .base_fx |
||
1602 | set_io REG_INTERNAL_CONFIG |
||
1603 | in eax, dx |
||
1604 | and eax, not (1111b shl 20) |
||
1605 | or eax, (0110b shl 20) ; set MIIDevice |
||
1606 | out dx, eax |
||
1607 | call try_mii |
||
1608 | test al, al |
||
1609 | jz .base_fx |
||
1610 | DEBUGF 1,"Using off-chip mii device\n" |
||
1611 | ret |
||
1612 | |||
1613 | .base_fx: |
||
1614 | ; switch to register window 3 |
||
1615 | set_io 0 |
||
1616 | ; check for 100BASE-FX |
||
1617 | set_io REG_MEDIA_OPTIONS |
||
1618 | in ax, dx ; read media option register |
||
1619 | test al, 100b ; check 100BASE-FX |
||
1620 | jz .aui_enable |
||
1621 | set_io REG_INTERNAL_CONFIG |
||
1622 | in eax, dx |
||
1623 | and eax, not (1111b shl 20) |
||
1624 | or eax, (0101b shl 20) ; set 100base-FX |
||
1625 | out dx, eax |
||
1626 | call try_link_detect |
||
1627 | test al, al |
||
1628 | jz .aui_enable |
||
1629 | DEBUGF 1,"Using 100Base-FX\n" |
||
1630 | ret |
||
1631 | |||
1632 | .aui_enable: |
||
1633 | ; switch to register window 3 |
||
1634 | set_io 0 |
||
1635 | ; check for 10Mbps AUI connector |
||
1636 | set_io REG_MEDIA_OPTIONS |
||
1637 | in ax, dx ; read media option register |
||
1638 | test al, 100000b ; check 10Mbps AUI connector |
||
1639 | jz .coax_available |
||
1640 | set_io REG_INTERNAL_CONFIG |
||
1641 | in eax, dx |
||
1642 | and eax, not (1111b shl 20) |
||
1643 | or eax, (0001b shl 20) ; set 10Mbps AUI connector |
||
1644 | out dx, eax |
||
1645 | xor al, al ; try 10Mbps AUI connector |
||
1646 | call try_loopback |
||
1647 | test al, al |
||
1648 | jz .coax_available |
||
1649 | DEBUGF 1,"Using 10Mbps aui\n" |
||
1650 | ret |
||
1651 | |||
1652 | .coax_available: |
||
1653 | ; switch to register window 3 |
||
1654 | set_io 0 |
||
1655 | ; check for coaxial 10BASE-2 port |
||
1656 | set_io REG_MEDIA_OPTIONS |
||
1657 | in ax, dx ; read media option register |
||
1658 | test al, 10000b ; check 10BASE-2 |
||
1659 | jz .set_first_available_media |
||
1660 | |||
1661 | set_io REG_INTERNAL_CONFIG |
||
1662 | in eax, dx |
||
1663 | and eax, not (1111b shl 20) |
||
1664 | or eax, (0011b shl 20) ; set 10BASE-2 |
||
1665 | out dx, eax |
||
1666 | mov al, 1 |
||
1667 | call try_loopback |
||
1668 | test al, al |
||
1669 | jz .set_first_available_media |
||
1670 | DEBUGF 1,"Using 10BASE-2 port\n" |
||
1671 | ret |
||
1672 | |||
1673 | .set_first_available_media: |
||
1674 | DEBUGF 1,"Using the first available media\n" |
||
1675 | |||
1676 | ;*************************************************************************** |
||
1677 | ; Function |
||
1678 | ; set_available_media |
||
1679 | ; Description |
||
1680 | ; sets the first available media |
||
1681 | ; Parameters |
||
1682 | ; ebx - ptr to device struct |
||
1683 | ; Return value |
||
1684 | ; al - 0 |
||
1685 | ; al - 1 |
||
1686 | ; Destroyed registers |
||
1687 | ; eax, edx |
||
1688 | ; |
||
1689 | ;*************************************************************************** |
||
1690 | |||
1691 | align 4 |
||
1692 | set_available_media: |
||
1693 | |||
1694 | DEBUGF 1,"Setting the available media\n" |
||
1695 | ; switch to register window 3 |
||
1696 | set_io 0 |
||
1697 | set_io REG_COMMAND |
||
1698 | mov ax, SELECT_REGISTER_WINDOW+3 |
||
1699 | out dx, ax |
||
1700 | |||
1701 | set_io REG_MEDIA_OPTIONS |
||
1702 | in ax, dx |
||
1703 | DEBUGF 1,"available media:%x\n", al |
||
1704 | mov cl, al |
||
1705 | |||
1706 | set_io REG_INTERNAL_CONFIG |
||
1707 | in eax, dx |
||
1708 | and eax, not (1111b shl 20) ; these bits hold the 'transceiver select' value |
||
1709 | |||
1710 | test cl, 10b ; baseTXAvailable |
||
1711 | jz @f |
||
1712 | |||
1713 | DEBUGF 1,"base TX is available\n" |
||
1714 | or eax, (100b shl 20) |
||
1715 | if defined FORCE_FD |
||
1716 | mov word [device.state], (1 shl 8) |
||
1717 | else |
||
1718 | mov word [device.mode], (1 shl 7) |
||
1719 | end if |
||
1720 | jmp .set_media |
||
1721 | @@: |
||
1722 | |||
1723 | test cl, 100b ; baseFXAvailable |
||
1724 | jz @f |
||
1725 | |||
1726 | DEBUGF 1,"base FX is available\n" |
||
1727 | or eax, (101b shl 20) |
||
1728 | mov word [device.state], (1 shl 10) |
||
1729 | jmp .set_media |
||
1730 | @@: |
||
1731 | |||
1732 | test cl, 1000000b ; miiDevice |
||
1733 | jz @f |
||
1734 | |||
1735 | DEBUGF 1,"mii-device is available\n" |
||
1736 | or eax, (0110b shl 20) |
||
1737 | mov word [device.state], (1 shl 13) |
||
1738 | jmp .set_media |
||
1739 | @@: |
||
1740 | |||
1741 | test cl, 1000b ; 10bTAvailable |
||
1742 | jz @f |
||
1743 | |||
1744 | DEBUGF 1,"10base-T is available\n" |
||
1745 | .set_default: |
||
1746 | if FORCE_FD |
||
1747 | mov word [device.state], (1 shl 6) |
||
1748 | else |
||
1749 | mov word [device.state], (1 shl 5) |
||
1750 | end if |
||
1751 | jmp .set_media |
||
1752 | @@: |
||
1753 | |||
1754 | test cl, 10000b ; coaxAvailable |
||
1755 | jz @f |
||
1756 | |||
1757 | DEBUGF 1,"coax is available\n" |
||
1758 | push eax |
||
1759 | set_io REG_COMMAND |
||
1760 | mov ax, (10b shl 11) ; EnableDcConverter |
||
1761 | out dx, ax |
||
1762 | pop eax |
||
1763 | |||
1764 | or eax, (11b shl 20) |
||
1765 | mov word [device.state], (1 shl 12) |
||
1766 | jmp .set_media |
||
1767 | @@: |
||
1768 | |||
1769 | test cl, 10000b ; auiAvailable |
||
1770 | jz .set_default |
||
1771 | |||
1772 | DEBUGF 1,"AUI is available\n" |
||
1773 | or eax, (1 shl 20) |
||
1774 | mov word [device.state], (1 shl 11) |
||
1775 | |||
1776 | .set_media: |
||
1777 | set_io 0 |
||
1778 | set_io REG_INTERNAL_CONFIG |
||
1779 | out dx, eax |
||
1780 | |||
1781 | if FORCE_FD |
||
1782 | DEBUGF 1,"Forcing full duplex\n" |
||
1783 | set_io REG_MAC_CONTROL |
||
1784 | in ax, dx |
||
1785 | or ax, 0x120 |
||
1786 | out dx, ax |
||
1787 | end if |
||
1788 | |||
1789 | mov al, 1 |
||
1790 | ret |
||
1791 | |||
1792 | |||
1793 | |||
1794 | ;*************************************************************************** |
||
1795 | ; Function |
||
1796 | ; wake_up |
||
1797 | ; Description |
||
1798 | ; set the power state to D0 |
||
1799 | ; |
||
1800 | ;*************************************************************************** |
||
1801 | |||
1802 | align 4 |
||
1803 | wake_up: |
||
1804 | |||
1805 | DEBUGF 1,"Waking up NIC: " |
||
1806 | |||
1807 | ; wake up - we directly do it by programming PCI |
||
1808 | ; check if the device is power management capable |
||
1809 | stdcall PciRead32, [device.pci_bus], [device.pci_dev], PCI_REG_STATUS |
||
1810 | |||
1811 | test al, 10000b ; is there "new capabilities" linked list? |
||
1812 | jz .device_awake |
||
1813 | |||
1814 | ; search for power management register |
||
1815 | stdcall PciRead16, [device.pci_bus], [device.pci_dev], PCI_REG_CAP_PTR |
||
1816 | cmp al, 0x3f |
||
1817 | jbe .device_awake |
||
1818 | |||
1819 | ; traverse the list |
||
1820 | movzx esi, al |
||
1821 | .pm_loop: |
||
1822 | stdcall PciRead32, [device.pci_bus], [device.pci_dev], esi |
||
1823 | |||
1824 | cmp al , 1 |
||
1825 | je .set_pm_state |
||
1826 | |||
1827 | movzx esi, ah |
||
1828 | |||
1829 | test ah , ah |
||
1830 | jnz .pm_loop |
||
1831 | jmp .device_awake |
||
1832 | |||
1833 | ; waku up the device if necessary |
||
1834 | .set_pm_state: |
||
1835 | |||
1836 | add esi, PCI_REG_PM_CTRL |
||
1837 | stdcall PciRead32, [device.pci_bus], [device.pci_dev], esi |
||
1838 | test al, 3 |
||
1839 | jz .device_awake |
||
1840 | and al, not 11b ; set state to D0 |
||
1841 | stdcall PciWrite32, [device.pci_bus], [device.pci_dev], esi, eax |
||
1842 | |||
1843 | .device_awake: |
||
1844 | DEBUGF 1,"Device is awake\n" |
||
1845 | |||
1846 | ret |
||
1847 | |||
1848 | |||
1849 | |||
1850 | |||
1851 | ;*************************************************************************** |
||
1852 | ; Function |
||
1853 | ; write_eeprom |
||
1854 | ; Description |
||
1855 | ; reads eeprom |
||
1856 | ; Note : the caller must switch to the register window 0 |
||
1857 | ; before calling this function |
||
1858 | ; Parameters: |
||
1859 | ; ax - register to be read (only the first 63 words can be read) |
||
1860 | ; cx - value to be read into the register |
||
1861 | ; Return value: |
||
1862 | ; ax - word read |
||
1863 | ; Destroyed registers |
||
1864 | ; ax, ebx, edx |
||
1865 | ; |
||
1866 | ;*************************************************************************** |
||
1867 | ; align 4 |
||
1868 | ;write_eeprom: |
||
1869 | ; mov edx, [io_addr] |
||
1870 | ; add edx, REG_EEPROM_COMMAND |
||
1871 | ; cmp ah, 11b |
||
1872 | ; ja .finish ; address may have a value of maximal 1023 |
||
1873 | ; shl ax, 2 |
||
1874 | ; shr al, 2 |
||
1875 | ; push eax |
||
1876 | ;; wait for busy |
||
1877 | ; mov ebx, 0xffff |
||
1878 | ;@@: |
||
1879 | ; in ax, dx |
||
1880 | ; test ah, 0x80 |
||
1881 | ; jz .write_enable |
||
1882 | ; dec ebx |
||
1883 | ; jns @r |
||
1884 | ;; write enable |
||
1885 | ;.write_enable: |
||
1886 | ; xor eax, eax |
||
1887 | ; mov eax, (11b shl 4) |
||
1888 | ; out dx, ax |
||
1889 | ;; wait for busy |
||
1890 | ; mov ebx, 0xffff |
||
1891 | ;@@: |
||
1892 | ; in ax, dx |
||
1893 | ; test ah, 0x80 |
||
1894 | ; jz .erase_loop |
||
1895 | ; dec ebx |
||
1896 | ; jns @r |
||
1897 | ;.erase_loop: |
||
1898 | ; pop eax |
||
1899 | ; push eax |
||
1900 | ; or ax, (11b shl 6) ; erase register |
||
1901 | ; out dx, ax |
||
1902 | ; mov ebx, 0xffff |
||
1903 | ;@@: |
||
1904 | ; in ax, dx |
||
1905 | ; test ah, 0x80 |
||
1906 | ; jz .write_reg |
||
1907 | ; dec ebx |
||
1908 | ; jns @r |
||
1909 | ;.write_reg: |
||
1910 | ; add edx, REG_EEPROM_DATA-REG_EEPROM_COMMAND |
||
1911 | ; mov eax, ecx |
||
1912 | ; out dx, ax |
||
1913 | ;; write enable |
||
1914 | ; add edx, REG_EEPROM_COMMAND-REG_EEPROM_DATA |
||
1915 | ; xor eax, eax |
||
1916 | ; mov eax, (11b shl 4) |
||
1917 | ; out dx, ax |
||
1918 | ; wait for busy |
||
1919 | ; mov ebx, 0xffff |
||
1920 | ;@@: |
||
1921 | ; in ax, dx |
||
1922 | ; test ah, 0x80 |
||
1923 | ; jz .issue_write_reg |
||
1924 | ; dec ebx |
||
1925 | ; jns @r |
||
1926 | ;.issue_write_reg: |
||
1927 | ; pop eax |
||
1928 | ; or ax, 01b shl 6 |
||
1929 | ; out dx, ax |
||
1930 | ;.finish: |
||
1931 | ; ret |
||
1932 | |||
1933 | |||
1934 | ;*************************************************************************** |
||
1935 | ; Function |
||
1936 | ; read_eeprom |
||
1937 | ; Description |
||
1938 | ; reads eeprom |
||
1939 | ; Parameters: |
||
1940 | ; ax - register to be read (only the first 63 words can be read) |
||
1941 | ; ebx = driver structure |
||
1942 | ; Return value: |
||
1943 | ; ax - word read |
||
1944 | ; Destroyed registers |
||
1945 | ; ax, ebx, edx |
||
1946 | ; |
||
1947 | ;*************************************************************************** |
||
1948 | |||
1949 | align 4 |
||
1950 | read_eeprom: |
||
1951 | |||
1952 | DEBUGF 1,"Reading from eeprom.. " |
||
1953 | |||
1954 | push eax |
||
1955 | ; switch to register window 0 |
||
1956 | set_io 0 |
||
1957 | set_io REG_COMMAND |
||
1958 | mov ax, SELECT_REGISTER_WINDOW+0 |
||
1959 | out dx, ax |
||
1960 | pop eax |
||
1961 | and ax, 111111b ; take only the first 6 bits into account |
||
1962 | movzx esi, [device.ver_id] |
||
1963 | |||
1964 | test word [esi*4+hw_versions+2], EEPROM_8BIT |
||
1965 | jz @f |
||
1966 | add ax, 0x230 ; hardware constant |
||
1967 | jmp .read |
||
1968 | @@: |
||
1969 | |||
1970 | add ax, EEPROM_CMD_READ |
||
1971 | test word [esi*4+hw_versions+2], EEPROM_OFFSET |
||
1972 | jz .read |
||
1973 | add ax, 0x30 |
||
1974 | .read: |
||
1975 | |||
1976 | set_io REG_EEPROM_COMMAND |
||
1977 | out dx, ax |
||
1978 | mov ecx, 0xffff ; duration of about 162 us ;-) |
||
1979 | .wait_for_reading: |
||
1980 | in ax, dx |
||
1981 | test ah, 0x80 ; check bit eepromBusy |
||
1982 | jz .read_data |
||
1983 | loop .wait_for_reading |
||
1984 | .read_data: |
||
1985 | set_io REG_EEPROM_DATA |
||
1986 | in ax, dx |
||
1987 | |||
1988 | DEBUGF 1,"ok!\n" |
||
1989 | |||
1990 | ret |
||
1991 | |||
1992 | ;*************************************************************************** |
||
1993 | ; Function |
||
1994 | ; mdio_sync |
||
1995 | ; Description |
||
1996 | ; initial synchronization |
||
1997 | ; Parameters |
||
3880 | hidnplayr | 1998 | ; |
3545 | hidnplayr | 1999 | ; Return value |
2000 | ; Destroyed registers |
||
2001 | ; ax, edx, cl |
||
2002 | ; |
||
2003 | ;*************************************************************************** |
||
2004 | |||
2005 | align 4 |
||
2006 | mdio_sync: |
||
2007 | |||
2008 | DEBUGF 1,"syncing mdio\n" |
||
2009 | |||
2010 | ; switch to register window 4 |
||
2011 | set_io 0 |
||
2012 | set_io REG_COMMAND |
||
2013 | mov ax, SELECT_REGISTER_WINDOW+4 |
||
2014 | out dx, ax |
||
2015 | cmp [device.preamble], 0 |
||
2016 | je .no_preamble |
||
2017 | ; send 32 logic ones |
||
2018 | set_io REG_PHYSICAL_MGMT |
||
2019 | mov ecx, 31 |
||
2020 | .loop: |
||
2021 | mov ax, (1 shl BIT_MGMT_DATA) or (1 shl BIT_MGMT_DIR) |
||
2022 | out dx, ax |
||
2023 | in ax, dx ; delay |
||
2024 | mov ax, (1 shl BIT_MGMT_DATA) or (1 shl BIT_MGMT_DIR) or (1 shl BIT_MGMT_CLK) |
||
2025 | out dx, ax |
||
2026 | in ax, dx ; delay |
||
2027 | loop .loop |
||
2028 | .no_preamble: |
||
2029 | |||
2030 | ret |
||
2031 | |||
2032 | ;*************************************************************************** |
||
2033 | ; Function |
||
2034 | ; mdio_read |
||
2035 | ; Description |
||
2036 | ; read MII register |
||
2037 | ; see page 16 in D83840A.pdf |
||
2038 | ; Parameters |
||
2039 | ; ah - PHY addr |
||
2040 | ; al - register addr |
||
2041 | ; ebx = device structure |
||
2042 | ; Return value |
||
2043 | ; ax - register read |
||
2044 | ; |
||
2045 | ;*************************************************************************** |
||
2046 | |||
2047 | align 4 |
||
2048 | mdio_read: |
||
2049 | |||
2050 | DEBUGF 1,"Reading MII registers\n" |
||
2051 | |||
2052 | push eax |
||
2053 | call mdio_sync ; returns with window #4 |
||
2054 | pop eax |
||
2055 | set_io 0 |
||
2056 | set_io REG_PHYSICAL_MGMT |
||
2057 | shl al, 3 |
||
2058 | shr ax, 3 |
||
2059 | and ax, not MII_CMD_MASK |
||
2060 | or ax, MII_CMD_READ |
||
2061 | |||
2062 | mov esi, eax |
||
2063 | mov ecx, 13 |
||
2064 | .cmd_loop: |
||
2065 | mov ax, (1 shl BIT_MGMT_DIR) ; write mii |
||
2066 | bt esi, ecx |
||
2067 | jnc .zero_bit |
||
2068 | or al, (1 shl BIT_MGMT_DATA) |
||
2069 | |||
2070 | .zero_bit: |
||
2071 | out dx, ax |
||
2072 | push ax |
||
2073 | in ax, dx ; delay |
||
2074 | pop ax |
||
2075 | or al, (1 shl BIT_MGMT_CLK) ; write |
||
2076 | out dx, ax |
||
2077 | in ax, dx ; delay |
||
2078 | loop .cmd_loop |
||
2079 | |||
2080 | ; read data (18 bits with the two transition bits) |
||
2081 | mov ecx, 17 |
||
2082 | xor esi, esi |
||
2083 | .read_loop: |
||
2084 | shl esi, 1 |
||
2085 | xor eax, eax ; read comand |
||
2086 | out dx, ax |
||
2087 | in ax, dx ; delay |
||
2088 | in ax, dx |
||
2089 | test al, (1 shl BIT_MGMT_DATA) |
||
2090 | jz .dont_set |
||
2091 | inc esi |
||
2092 | .dont_set: |
||
2093 | mov ax, (1 shl BIT_MGMT_CLK) |
||
2094 | out dx, ax |
||
2095 | in ax, dx ; delay |
||
2096 | loop .read_loop |
||
2097 | mov eax, esi |
||
2098 | |||
2099 | ret |
||
2100 | |||
2101 | |||
2102 | |||
2103 | ;*************************************************************************** |
||
2104 | ; Function |
||
2105 | ; mdio_write |
||
2106 | ; Description |
||
2107 | ; write MII register |
||
2108 | ; see page 16 in D83840A.pdf |
||
2109 | ; Parameters |
||
2110 | ; ah - PHY addr |
||
2111 | ; al - register addr |
||
2112 | ; si - word to be written |
||
2113 | ; Return value |
||
2114 | ; ax - register read |
||
2115 | ; |
||
2116 | ;*************************************************************************** |
||
2117 | |||
2118 | align 4 |
||
2119 | mdio_write: |
||
2120 | |||
2121 | DEBUGF 1,"Writing MII registers\n" |
||
2122 | |||
2123 | push eax |
||
2124 | call mdio_sync |
||
2125 | pop eax |
||
2126 | set_io 0 |
||
2127 | set_io REG_PHYSICAL_MGMT |
||
2128 | shl al, 3 |
||
2129 | shr ax, 3 |
||
2130 | and ax, not MII_CMD_MASK |
||
2131 | or ax, MII_CMD_WRITE |
||
2132 | shl eax, 2 |
||
2133 | or eax, 10b ; transition bits |
||
2134 | shl eax, 16 |
||
2135 | mov ax, si |
||
2136 | mov esi, eax |
||
2137 | mov ecx, 31 |
||
2138 | |||
2139 | .cmd_loop: |
||
2140 | mov ax, (1 shl BIT_MGMT_DIR) ; write mii |
||
2141 | bt esi, ecx |
||
2142 | jnc @f |
||
2143 | or al, (1 shl BIT_MGMT_DATA) |
||
2144 | @@: |
||
2145 | out dx, ax |
||
2146 | push eax |
||
2147 | in ax, dx ; delay |
||
2148 | pop eax |
||
2149 | or al, (1 shl BIT_MGMT_CLK) ; write |
||
2150 | out dx, ax |
||
2151 | in ax, dx ; delay |
||
2152 | loop .cmd_loop |
||
2153 | |||
2154 | ret |
||
2155 | |||
2156 | |||
2157 | ;*************************************************************************** |
||
2158 | ; Function |
||
2159 | ; check_tx_status |
||
2160 | ; Description |
||
2161 | ; Checks TxStatus queue. |
||
2162 | ; Return value |
||
2163 | ; al - 0 no error was found |
||
2164 | ; al - 1 error was found TxReset was needed |
||
2165 | ; Destroyed registers |
||
3880 | hidnplayr | 2166 | ; eax, ecx, edx |
3545 | hidnplayr | 2167 | ; |
2168 | ;*************************************************************************** |
||
2169 | |||
2170 | align 4 |
||
2171 | check_tx_status: |
||
2172 | |||
2173 | DEBUGF 1,"Checking TX status\n" |
||
2174 | |||
2175 | ; clear TxStatus queue |
||
2176 | set_io 0 |
||
2177 | set_io REG_TX_STATUS |
||
2178 | mov ecx, 31 ; max number of queue entries |
||
2179 | |||
2180 | .tx_status_loop: |
||
2181 | in al, dx |
||
2182 | test al, al |
||
2183 | jz .finish ; no error |
||
2184 | test al, 0x3f |
||
2185 | jnz .error |
||
2186 | .no_error_found: |
||
2187 | ; clear current TxStatus entry which advances the next one |
||
2188 | xor al, al |
||
2189 | out dx, al |
||
2190 | loop .tx_status_loop |
||
2191 | |||
2192 | .finish: |
||
2193 | |||
2194 | ret |
||
2195 | |||
2196 | .error: |
||
2197 | call tx_reset |
||
2198 | ret |
||
2199 | |||
2200 | |||
2201 | |||
2202 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2203 | ;; ;; |
||
2204 | ;; Transmit (vortex) ;; |
||
2205 | ;; ;; |
||
2206 | ;; In: buffer pointer in [esp+4] ;; |
||
2207 | ;; size of buffer in [esp+8] ;; |
||
2208 | ;; pointer to device structure in ebx ;; |
||
2209 | ;; ;; |
||
2210 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2211 | |||
2212 | align 4 |
||
2213 | vortex_transmit: |
||
2214 | |||
2215 | DEBUGF 1,"Sending packet (vortex)\n" |
||
2216 | |||
2217 | cmp dword [esp+8], MAX_ETH_FRAME_SIZE |
||
2218 | ja .finish ; packet is too long |
||
2219 | |||
2220 | call check_tx_status |
||
2221 | |||
2222 | ; switch to register window 7 |
||
2223 | set_io 0 |
||
2224 | set_io REG_COMMAND |
||
2225 | mov ax, SELECT_REGISTER_WINDOW+7 |
||
2226 | out dx, ax |
||
2227 | ; check for master operation in progress |
||
2228 | set_io REG_MASTER_STATUS |
||
2229 | in ax, dx |
||
2230 | test ah, 0x80 |
||
2231 | jnz .finish ; no DMA for sending |
||
2232 | ; program frame address to be sent |
||
2233 | set_io REG_MASTER_ADDRESS |
||
2234 | mov eax, [esp+4] |
||
2235 | call GetPgAddr |
||
2236 | out dx, eax |
||
2237 | ; program frame length |
||
2238 | set_io REG_MASTER_LEN |
||
2239 | mov eax, [esp+8] |
||
2240 | ;;; and eax, not 3 |
||
2241 | out dx, ax |
||
2242 | ; start DMA Down |
||
2243 | set_io REG_COMMAND |
||
2244 | mov ax, (10100b shl 11) + 1 ; StartDMADown |
||
2245 | out dx, ax |
||
2246 | .finish: |
||
2247 | call KernelFree |
||
2248 | add esp, 4 |
||
2249 | ret |
||
2250 | |||
2251 | |||
2252 | |||
2253 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2254 | ;; ;; |
||
2255 | ;; Transmit (boomerang) ;; |
||
2256 | ;; ;; |
||
2257 | ;; In: buffer pointer in [esp+4] ;; |
||
2258 | ;; size of buffer in [esp+8] ;; |
||
2259 | ;; pointer to device structure in ebx ;; |
||
2260 | ;; ;; |
||
2261 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2262 | |||
2263 | align 4 |
||
2264 | boomerang_transmit: |
||
2265 | |||
2266 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n",[esp+4],[esp+8] |
||
2267 | mov eax, [esp+4] |
||
2268 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
||
2269 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
||
2270 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
||
2271 | [eax+13]:2,[eax+12]:2 |
||
2272 | |||
2273 | cmp dword [esp+8], MAX_ETH_FRAME_SIZE |
||
2274 | ja .fail |
||
2275 | |||
2276 | call check_tx_status |
||
2277 | |||
2278 | ; calculate descriptor address |
||
2279 | mov esi, [device.prev_dpd] |
||
2280 | DEBUGF 1,"Previous DPD: %x\n", esi |
||
2281 | add esi, dpd.size |
||
2282 | lea ecx, [device.dpd_buffer + (NUM_TX_DESC)*dpd.size] |
||
2283 | cmp esi, ecx |
||
2284 | jb @f |
||
2285 | lea esi, [device.dpd_buffer] ; Wrap if needed |
||
2286 | @@: |
||
2287 | DEBUGF 1,"Found a free DPD: %x\n", esi |
||
2288 | |||
2289 | ; check DnListPtr |
||
2290 | set_io 0 |
||
2291 | set_io REG_DN_LIST_PTR |
||
2292 | in eax, dx |
||
2293 | ; mark if Dn_List_Ptr is cleared |
||
2294 | test eax, eax |
||
2295 | setz [device.dn_list_ptr_cleared] |
||
2296 | |||
2297 | ; finish if no more free descriptor is available - FIXME! |
||
2298 | ; cmp eax, esi |
||
2299 | ; jz .finish |
||
2300 | |||
2301 | ; update statistics |
||
2302 | inc [device.packets_tx] |
||
2303 | mov ecx, [esp+8] ; buffer size |
||
2304 | add dword [device.bytes_tx], ecx |
||
2305 | adc dword [device.bytes_tx + 4], 0 |
||
2306 | |||
2307 | ; program DPD |
||
2308 | and [esi+dpd.next_ptr], 0 |
||
2309 | mov eax, [esp+4] ; Tx buffer address |
||
2310 | mov [esi+dpd.realaddr], eax |
||
2311 | call GetPgAddr |
||
2312 | mov [esi+dpd.frag_addr], eax |
||
2313 | mov ecx, [esp+8] ; packet size |
||
2314 | or ecx, 0x80000000 ; last fragment |
||
2315 | mov [esi+dpd.frag_len], ecx |
||
2316 | |||
2317 | mov ecx, [esp+8] ; packet size |
||
2318 | ; or ecx, 0x8000 ; transmission complete notification |
||
2319 | |||
2320 | or ecx, 1 shl 31 |
||
2321 | |||
2322 | ; test byte [device.has_hwcksm], 0xff |
||
2323 | ; jz @f |
||
2324 | ; or ecx, (1 shl 26) ; set AddTcpChecksum |
||
2325 | ;@@: |
||
2326 | mov [esi+dpd.frame_start_hdr], ecx |
||
2327 | |||
2328 | DEBUGF 1,"DPD: lin=%x phys=%x len=%x start hdr=%x\n", [esi+dpd.realaddr]:8, [esi+dpd.frag_addr]:8, [esi+dpd.frag_len]:8, [esi+dpd.frame_start_hdr]:8 |
||
2329 | |||
2330 | ; calculate physical address of dpd |
||
2331 | mov eax, esi |
||
2332 | GetRealAddr |
||
2333 | cmp [device.dn_list_ptr_cleared], 0 |
||
2334 | jz .add_to_list |
||
2335 | |||
2336 | ; write Dn_List_Ptr |
||
2337 | DEBUGF 1,"DPD phys addr=%x\n", eax |
||
2338 | set_io 0 |
||
2339 | set_io REG_DN_LIST_PTR |
||
2340 | out dx, eax |
||
2341 | jmp .finish |
||
2342 | |||
2343 | .add_to_list: |
||
2344 | DEBUGF 1,"Adding To list\n" |
||
2345 | push eax |
||
2346 | ; DnStall |
||
2347 | set_io 0 |
||
2348 | set_io REG_COMMAND |
||
2349 | mov ax, ((110b shl 11)+2) |
||
2350 | out dx, ax |
||
2351 | |||
2352 | ; wait for DnStall to complete |
||
2353 | DEBUGF 1,"Waiting for DnStall\n" |
||
2354 | mov ecx, 6000 |
||
2355 | .wait_for_stall: |
||
2356 | in ax, dx ; read REG_INT_STATUS |
||
2357 | test ah, 10000b |
||
2358 | jz .dnstall_ok |
||
2359 | dec ecx |
||
2360 | jnz .wait_for_stall |
||
2361 | |||
2362 | .dnstall_ok: |
||
2363 | DEBUGF 1,"DnStall ok!\n" |
||
2364 | mov ecx, [device.prev_dpd] |
||
2365 | mov [ecx+dpd.next_ptr], eax |
||
2366 | |||
2367 | set_io 0 |
||
2368 | set_io REG_DN_LIST_PTR |
||
2369 | in eax, dx |
||
2370 | test eax, eax |
||
2371 | pop eax |
||
2372 | jnz .dnunstall |
||
2373 | |||
2374 | ; if Dn_List_Ptr has been cleared fill it up |
||
2375 | DEBUGF 1,"DnList Ptr has been cleared\n" |
||
2376 | out dx, eax |
||
2377 | |||
2378 | .dnunstall: |
||
2379 | ; DnUnStall |
||
2380 | set_io 0 |
||
2381 | set_io REG_COMMAND |
||
2382 | mov ax, ((110b shl 11)+3) |
||
2383 | out dx, ax |
||
2384 | |||
2385 | .finish: |
||
2386 | mov [device.prev_dpd], esi |
||
2387 | xor eax, eax |
||
2388 | ret 8 |
||
2389 | |||
2390 | .fail: |
||
2391 | stdcall KernelFree, [esp+4] |
||
2392 | or eax, -1 |
||
2393 | ret 8 |
||
2394 | |||
2395 | |||
2396 | ;--------------------------------- |
||
2397 | ; Write MAC |
||
2398 | |||
2399 | align 4 |
||
2400 | write_mac: |
||
2401 | |||
2402 | DEBUGF 1,"Writing mac\n" |
||
2403 | |||
2404 | set_io 0 |
||
2405 | set_io REG_COMMAND |
||
2406 | |||
2407 | ; switch to register window 2 |
||
2408 | mov ax, SELECT_REGISTER_WINDOW+2 |
||
2409 | out dx, ax |
||
2410 | |||
2411 | ; write MAC addres back into the station address registers |
||
2412 | set_io REG_STATION_ADDRESS_LO |
||
2413 | lea esi, [device.mac] |
||
2414 | outsw |
||
2415 | inc dx |
||
2416 | inc dx |
||
2417 | outsw |
||
2418 | inc dx |
||
2419 | inc dx |
||
2420 | outsw |
||
2421 | |||
2422 | |||
2423 | ;---------------------------- |
||
2424 | ; Read MAC |
||
2425 | |||
2426 | align 4 |
||
2427 | read_mac: |
||
2428 | |||
2429 | set_io 0 |
||
2430 | set_io REG_COMMAND |
||
2431 | |||
2432 | ; switch to register window 2 |
||
2433 | mov ax, SELECT_REGISTER_WINDOW+2 |
||
2434 | out dx, ax |
||
2435 | |||
2436 | ; write MAC addres back into the station address registers |
||
2437 | set_io REG_STATION_ADDRESS_LO |
||
2438 | lea edi, [device.mac] |
||
2439 | insw |
||
2440 | inc dx |
||
2441 | inc dx |
||
2442 | insw |
||
2443 | inc dx |
||
2444 | inc dx |
||
2445 | insw |
||
2446 | |||
2447 | DEBUGF 1,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2 |
||
2448 | |||
2449 | ret |
||
2450 | |||
2451 | |||
2452 | ;------------------------------------ |
||
2453 | ; Read MAC from eeprom |
||
2454 | |||
2455 | align 4 |
||
2456 | read_mac_eeprom: ; Tested - ok |
||
2457 | |||
2458 | DEBUGF 1,"Reading mac from eeprom\n" |
||
2459 | |||
2460 | ; read MAC from eeprom |
||
2461 | mov ecx, 3 |
||
2462 | .mac_loop: |
||
2463 | lea ax, [EEPROM_REG_OEM_NODE_ADDR+ecx-1] |
||
2464 | push ecx |
||
2465 | call read_eeprom |
||
2466 | pop ecx |
||
2467 | xchg ah, al ; htons |
||
2468 | mov word [device.mac+ecx*2-2], ax |
||
2469 | loop .mac_loop |
||
2470 | |||
2471 | DEBUGF 1,"%x-%x-%x-%x-%x-%x\n",[device.mac]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2 |
||
2472 | |||
2473 | ret |
||
2474 | |||
2475 | |||
2476 | |||
2477 | |||
2478 | |||
2479 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2480 | ;; ;; |
||
2481 | ;; Vortex Interrupt handler ;; |
||
2482 | ;; ;; |
||
2483 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2484 | |||
2485 | align 4 |
||
2486 | int_vortex: |
||
2487 | |||
2488 | push ebx esi edi |
||
2489 | |||
3880 | hidnplayr | 2490 | DEBUGF 1,"INT\n" |
3545 | hidnplayr | 2491 | |
2492 | ; find pointer of device wich made IRQ occur |
||
2493 | |||
2494 | mov esi, VORTEX_LIST |
||
2495 | mov ecx, [VORTEX_DEVICES] |
||
2496 | test ecx, ecx |
||
2497 | jz .nothing |
||
2498 | .nextdevice: |
||
2499 | mov ebx, dword [esi] |
||
2500 | |||
2501 | |||
2502 | set_io 0 |
||
2503 | set_io REG_INT_STATUS |
||
2504 | in ax, dx |
||
2505 | and ax, S_5_INTS |
||
2506 | jnz .nothing |
||
2507 | |||
2508 | add esi, 4 |
||
2509 | |||
2510 | test ax , ax |
||
2511 | jnz .got_it |
||
2512 | loop .nextdevice |
||
2513 | |||
2514 | .nothing: |
||
2515 | pop edi esi ebx |
||
2516 | xor eax, eax |
||
2517 | |||
2518 | ret |
||
2519 | |||
2520 | .got_it: |
||
2521 | |||
2522 | DEBUGF 1,"Device: %x Status: %x ",ebx,eax:4 |
||
2523 | |||
2524 | test ax, RxComplete |
||
2525 | jz .noRX |
||
2526 | |||
2527 | set_io 0 |
||
2528 | .rx_status_loop: |
||
2529 | ; examine RxStatus |
||
2530 | set_io REG_RX_STATUS |
||
2531 | in ax, dx |
||
2532 | test ax, ax |
||
2533 | jz .finish |
||
2534 | |||
2535 | test ah, 0x80 ; rxIncomplete |
||
2536 | jnz .finish |
||
2537 | |||
2538 | test ah, 0x40 |
||
2539 | jz .check_length |
||
2540 | |||
2541 | ; discard the top frame received advancing the next one |
||
2542 | set_io REG_COMMAND |
||
2543 | mov ax, (01000b shl 11) |
||
2544 | out dx, ax |
||
2545 | jmp .rx_status_loop |
||
2546 | |||
2547 | .check_length: |
||
2548 | and eax, 0x1fff |
||
2549 | cmp eax, MAX_ETH_PKT_SIZE |
||
2550 | ja .discard_frame ; frame is too long discard it |
||
2551 | |||
2552 | .check_dma: |
||
2553 | mov ecx, eax |
||
2554 | ; switch to register window 7 |
||
2555 | set_io 0 |
||
2556 | set_io REG_COMMAND |
||
2557 | mov ax, SELECT_REGISTER_WINDOW+7 |
||
2558 | out dx, ax |
||
2559 | ; check for master operation in progress |
||
2560 | set_io REG_MASTER_STATUS |
||
2561 | in ax, dx |
||
2562 | |||
2563 | test ah, 0x80 |
||
2564 | jnz .finish |
||
2565 | |||
2566 | .read_frame: |
||
2567 | ; program buffer address to read in |
||
2568 | push ecx |
||
2569 | stdcall KernelAlloc, MAX_ETH_FRAME_SIZE |
||
2570 | pop ecx |
||
2571 | test eax, eax |
||
2572 | jz .finish |
||
2573 | |||
2574 | push .discard_frame |
||
2575 | push ecx |
||
2576 | push eax |
||
2577 | ; zero_to_dma eax |
||
2578 | set_io REG_MASTER_ADDRESS |
||
2579 | out dx, eax |
||
2580 | |||
2581 | ; program frame length |
||
2582 | set_io REG_MASTER_LEN |
||
2583 | mov ax, 1560 |
||
2584 | out dx, ax |
||
2585 | |||
2586 | ; start DMA Up |
||
2587 | set_io REG_COMMAND |
||
2588 | mov ax, (10100b shl 11) ; StartDMAUp |
||
2589 | out dx, ax |
||
2590 | |||
2591 | ; check for master operation in progress |
||
2592 | set_io REG_MASTER_STATUS ; TODO: use timeout and reset after timeout expired |
||
2593 | .dma_loop: |
||
2594 | in ax, dx |
||
2595 | test ah, 0x80 |
||
2596 | jnz .dma_loop |
||
2597 | |||
2598 | ; registrate the received packet to kernel |
||
2599 | jmp Eth_input |
||
2600 | |||
2601 | ; discard the top frame received |
||
2602 | .discard_frame: |
||
2603 | set_io 0 |
||
2604 | set_io REG_COMMAND |
||
2605 | mov ax, (01000b shl 11) |
||
2606 | out dx, ax |
||
2607 | |||
2608 | .finish: |
||
2609 | |||
2610 | |||
2611 | .noRX: |
||
2612 | |||
2613 | test ax, DMADone |
||
2614 | jz .noDMA |
||
2615 | |||
2616 | push ax |
||
2617 | |||
2618 | set_io 0 |
||
2619 | set_io 12 |
||
2620 | in ax, dx |
||
2621 | test ax, 0x1000 |
||
2622 | jz .nodmaclear |
||
2623 | |||
2624 | mov ax, 0x1000 |
||
2625 | out dx, ax |
||
2626 | |||
2627 | .nodmaclear: |
||
2628 | |||
2629 | pop ax |
||
2630 | |||
2631 | DEBUGF 1, "DMA Done!\n", cx |
||
2632 | |||
2633 | |||
2634 | |||
2635 | .noDMA: |
||
2636 | |||
2637 | |||
2638 | |||
2639 | .ACK: |
||
2640 | set_io 0 |
||
2641 | set_io REG_COMMAND |
||
2642 | mov ax, AckIntr + IntReq + IntLatch |
||
2643 | out dx, ax |
||
2644 | |||
2645 | pop edi esi ebx |
||
2646 | |||
2647 | ret |
||
2648 | |||
2649 | |||
2650 | |||
2651 | |||
2652 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2653 | ;; ;; |
||
2654 | ;; Boomerang Interrupt handler ;; |
||
2655 | ;; ;; |
||
2656 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
2657 | |||
2658 | align 4 |
||
2659 | int_boomerang: |
||
2660 | |||
2661 | push ebx esi edi |
||
2662 | |||
3880 | hidnplayr | 2663 | DEBUGF 1,"INT\n" |
3545 | hidnplayr | 2664 | |
2665 | ; find pointer of device wich made IRQ occur |
||
2666 | |||
2667 | mov ecx, [BOOMERANG_DEVICES] |
||
2668 | test ecx, ecx |
||
2669 | jz .nothing |
||
2670 | mov esi, BOOMERANG_LIST |
||
2671 | .nextdevice: |
||
2672 | mov ebx, [esi] |
||
2673 | |||
2674 | set_io 0 |
||
2675 | set_io REG_INT_STATUS |
||
2676 | in ax, dx |
||
2677 | test ax, ax |
||
2678 | jnz .got_it |
||
2679 | .continue: |
||
2680 | add esi, 4 |
||
2681 | dec ecx |
||
2682 | jnz .nextdevice |
||
2683 | .nothing: |
||
2684 | pop edi esi ebx |
||
2685 | xor eax, eax |
||
2686 | |||
2687 | ret |
||
2688 | |||
2689 | .got_it: |
||
2690 | |||
2691 | DEBUGF 1,"Device: %x Status: %x ", ebx, ax |
||
2692 | push ax |
||
2693 | |||
2694 | ; disable all INTS |
||
2695 | |||
2696 | set_io REG_COMMAND |
||
2697 | mov ax, SetIntrEnb |
||
2698 | out dx, ax |
||
2699 | |||
2700 | ;-------------------------------------------------------------------------- |
||
2701 | test word[esp], UpComplete |
||
2702 | jz .noRX |
||
2703 | |||
2704 | push ebx |
||
2705 | |||
2706 | .receive: |
||
2707 | DEBUGF 1,"UpComplete\n" |
||
2708 | |||
2709 | ; check if packet is uploaded |
||
2710 | mov esi, [device.curr_upd] |
||
2711 | test byte [esi+upd.pkt_status+1], 0x80 ; upPktComplete |
||
2712 | jz .finish |
||
2713 | DEBUGF 1, "Current upd: %x\n", esi |
||
2714 | ; packet is uploaded check for any error |
||
2715 | .check_error: |
||
2716 | test byte [esi+upd.pkt_status+1], 0x40 ; upError |
||
2717 | jz .copy_packet_length |
||
2718 | DEBUGF 1,"Error in packet\n" |
||
2719 | and [esi+upd.pkt_status], 0 ; mark packet as read |
||
2720 | jmp .finish |
||
2721 | .copy_packet_length: |
||
2722 | mov ecx, [esi+upd.pkt_status] |
||
2723 | and ecx, 0x1fff |
||
2724 | |||
2725 | ; cmp ecx, MAX_ETH_PKT_SIZE |
||
2726 | ; jbe .copy_packet |
||
2727 | ; and [esi+upd.pkt_status], 0 |
||
2728 | ; jmp .finish |
||
2729 | ; .copy_packet: |
||
2730 | |||
2731 | DEBUGF 1, "Received %u bytes in buffer %x\n", ecx, [esi+upd.realaddr]:8 |
||
2732 | |||
2733 | push dword .loop ;.finish |
||
2734 | push ecx |
||
2735 | push [esi+upd.realaddr] |
||
2736 | |||
2737 | ; update statistics |
||
2738 | inc [device.packets_rx] |
||
2739 | add dword [device.bytes_rx], ecx |
||
2740 | adc dword [device.bytes_rx + 4], 0 |
||
2741 | |||
2742 | ; update UPD (Alloc new buffer for next packet) |
||
2743 | stdcall KernelAlloc, MAX_ETH_FRAME_SIZE |
||
2744 | mov [esi + upd.realaddr], eax |
||
2745 | GetRealAddr |
||
2746 | mov [esi + upd.frag_addr], eax |
||
2747 | and [esi + upd.pkt_status], 0 |
||
2748 | mov [esi + upd.frag_len], MAX_ETH_FRAME_SIZE or (1 shl 31) |
||
2749 | |||
2750 | ; Update UPD pointer |
||
2751 | add esi, upd.size |
||
2752 | lea ecx, [device.upd_buffer+(NUM_RX_DESC)*upd.size] |
||
2753 | cmp esi, ecx |
||
2754 | jb @f |
||
2755 | lea esi, [device.upd_buffer] |
||
2756 | @@: |
||
2757 | mov [device.curr_upd], esi |
||
2758 | DEBUGF 1, "Next upd: %x\n", esi |
||
2759 | |||
2760 | jmp Eth_input |
||
2761 | .loop: |
||
2762 | |||
2763 | mov ebx, [esp] |
||
2764 | jmp .receive |
||
2765 | |||
2766 | .finish: |
||
2767 | pop ebx |
||
2768 | |||
2769 | ; check if the NIC is in the upStall state |
||
2770 | set_io 0 |
||
2771 | set_io REG_UP_PKT_STATUS |
||
2772 | in eax, dx |
||
2773 | test ah, 0x20 ; UpStalled |
||
2774 | jz .noUpUnStall |
||
2775 | |||
2776 | DEBUGF 1, "upUnStalling\n" |
||
2777 | ; issue upUnStall command |
||
2778 | set_io REG_COMMAND |
||
2779 | mov ax, ((11b shl 12)+1) ; upUnStall |
||
2780 | out dx, ax |
||
2781 | |||
2782 | ;;;; FIXME: make upunstall work |
||
2783 | |||
2784 | .noUpUnStall: |
||
2785 | .noRX: |
||
2786 | test word[esp], DownComplete |
||
2787 | jz .noTX |
||
2788 | DEBUGF 1, "Downcomplete!\n" |
||
2789 | |||
2790 | mov ecx, NUM_TX_DESC |
||
2791 | lea esi, [device.dpd_buffer] |
||
2792 | .txloop: |
||
2793 | test [esi+dpd.frame_start_hdr], 1 shl 31 |
||
2794 | jz .maybenext |
||
2795 | |||
2796 | and [esi+dpd.frame_start_hdr], 0 |
||
2797 | push ecx |
||
2798 | stdcall KernelFree, [esi+dpd.realaddr] |
||
2799 | pop ecx |
||
2800 | |||
2801 | .maybenext: |
||
2802 | add esi, dpd.size |
||
2803 | dec ecx |
||
2804 | jnz .txloop |
||
2805 | |||
2806 | .noTX: |
||
2807 | pop ax |
||
2808 | |||
2809 | set_io 0 |
||
2810 | set_io REG_COMMAND |
||
2811 | or ax, AckIntr |
||
2812 | out dx, ax |
||
2813 | |||
2814 | set_io REG_INT_STATUS |
||
2815 | in ax, dx |
||
2816 | test ax, S_5_INTS |
||
2817 | jnz .got_it |
||
2818 | |||
2819 | ;re-enable ints |
||
2820 | set_io REG_COMMAND |
||
2821 | mov ax, SetIntrEnb + S_5_INTS |
||
2822 | out dx, ax |
||
2823 | |||
2824 | pop edi esi ebx |
||
2825 | |||
2826 | ret |
||
2827 | |||
2828 | |||
2829 | |||
2830 | |||
2831 | ; End of code |
||
2832 | align 4 ; Place all initialised data here |
||
2833 | |||
2834 | macro strtbl name, [string] |
||
2835 | { |
||
2836 | common |
||
2837 | label name dword |
||
2838 | forward |
||
2839 | local label |
||
2840 | dd label |
||
2841 | forward |
||
2842 | label db string, 0 |
||
2843 | } |
||
2844 | |||
2845 | VORTEX_DEVICES dd 0 |
||
2846 | BOOMERANG_DEVICES dd 0 |
||
2847 | version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF) |
||
2848 | my_service db '3C59X',0 ; max 16 chars include zero |
||
2849 | |||
2850 | |||
2851 | strtbl link_str, \ |
||
2852 | "No valid link type detected", \ |
||
2853 | "10BASE-T half duplex", \ |
||
2854 | "10BASE-T full-duplex", \ |
||
2855 | "100BASE-TX half duplex", \ |
||
2856 | "100BASE-TX full duplex", \ |
||
2857 | "100BASE-T4", \ |
||
2858 | "100BASE-FX", \ |
||
2859 | "10Mbps AUI", \ |
||
2860 | "10Mbps COAX (BNC)", \ |
||
2861 | "miiDevice - not supported" |
||
2862 | |||
2863 | strtbl hw_str, \ |
||
2864 | "3c590 Vortex 10Mbps", \ |
||
2865 | "3c592 EISA 10Mbps Demon/Vortex", \ |
||
2866 | "3c597 EISA Fast Demon/Vortex", \ |
||
2867 | "3c595 Vortex 100baseTx", \ |
||
2868 | "3c595 Vortex 100baseT4", \ |
||
2869 | "3c595 Vortex 100base-MII", \ |
||
2870 | "3c900 Boomerang 10baseT", \ |
||
2871 | "3c900 Boomerang 10Mbps Combo", \ |
||
2872 | "3c900 Cyclone 10Mbps TPO", \ |
||
2873 | "3c900 Cyclone 10Mbps Combo", \ |
||
2874 | "3c900 Cyclone 10Mbps TPC", \ |
||
2875 | "3c900B-FL Cyclone 10base-FL", \ |
||
2876 | "3c905 Boomerang 100baseTx", \ |
||
2877 | "3c905 Boomerang 100baseT4", \ |
||
2878 | "3c905B Cyclone 100baseTx", \ |
||
2879 | "3c905B Cyclone 10/100/BNC", \ |
||
2880 | "3c905B-FX Cyclone 100baseFx", \ |
||
2881 | "3c905C Tornado", \ |
||
2882 | "3c980 Cyclone", \ |
||
2883 | "3c982 Dual Port Server Cyclone", \ |
||
2884 | "3cSOHO100-TX Hurricane", \ |
||
2885 | "3c555 Laptop Hurricane", \ |
||
2886 | "3c556 Laptop Tornado", \ |
||
2887 | "3c556B Laptop Hurricane", \ |
||
2888 | "3c575 [Megahertz] 10/100 LAN CardBus", \ |
||
2889 | "3c575 Boomerang CardBus", \ |
||
2890 | "3CCFE575BT Cyclone CardBus", \ |
||
2891 | "3CCFE575CT Tornado CardBus", \ |
||
2892 | "3CCFE656 Cyclone CardBus", \ |
||
2893 | "3CCFEM656B Cyclone+Winmodem CardBus", \ |
||
2894 | "3CXFEM656C Tornado+Winmodem CardBus", \ |
||
2895 | "3c450 HomePNA Tornado", \ |
||
2896 | "3c920 Tornado", \ |
||
2897 | "3c982 Hydra Dual Port A", \ |
||
2898 | "3c982 Hydra Dual Port B", \ |
||
2899 | "3c905B-T4", \ |
||
2900 | "3c920B-EMB-WNM Tornado" |
||
2901 | |||
2902 | |||
2903 | |||
2904 | align 4 |
||
2905 | hw_versions: |
||
2906 | dw 0x5900, IS_VORTEX ; 3c590 Vortex 10Mbps |
||
2907 | dw 0x5920, IS_VORTEX ; 3c592 EISA 10Mbps Demon/Vortex |
||
2908 | dw 0x5970, IS_VORTEX ; 3c597 EISA Fast Demon/Vortex |
||
2909 | dw 0x5950, IS_VORTEX ; 3c595 Vortex 100baseTx |
||
2910 | dw 0x5951, IS_VORTEX ; 3c595 Vortex 100baseT4 |
||
2911 | dw 0x5952, IS_VORTEX ; 3c595 Vortex 100base-MII |
||
2912 | dw 0x9000, IS_BOOMERANG ; 3c900 Boomerang 10baseT |
||
2913 | dw 0x9001, IS_BOOMERANG ; 3c900 Boomerang 10Mbps Combo |
||
2914 | dw 0x9004, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3c900 Cyclone 10Mbps TPO |
||
2915 | dw 0x9005, IS_CYCLONE or HAS_HWCKSM ; 3c900 Cyclone 10Mbps Combo |
||
2916 | dw 0x9006, IS_CYCLONE or HAS_HWCKSM ; 3c900 Cyclone 10Mbps TPC |
||
2917 | dw 0x900A, IS_CYCLONE or HAS_HWCKSM ; 3c900B-FL Cyclone 10base-FL |
||
2918 | dw 0x9050, IS_BOOMERANG or HAS_MII ; 3c905 Boomerang 100baseTx |
||
2919 | dw 0x9051, IS_BOOMERANG or HAS_MII ; 3c905 Boomerang 100baseT4 |
||
2920 | dw 0x9055, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM or EXTRA_PREAMBLE ; 3c905B Cyclone 100baseTx |
||
2921 | dw 0x9058, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3c905B Cyclone 10/100/BNC |
||
2922 | dw 0x905A, IS_CYCLONE or HAS_HWCKSM ; 3c905B-FX Cyclone 100baseFx |
||
2923 | dw 0x9200, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c905C Tornado |
||
2924 | dw 0x9800, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3c980 Cyclone |
||
2925 | dw 0x9805, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c982 Dual Port Server Cyclone |
||
2926 | dw 0x7646, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM ; 3cSOHO100-TX Hurricane |
||
2927 | dw 0x5055, IS_CYCLONE or EEPROM_8BIT or HAS_HWCKSM ; 3c555 Laptop Hurricane |
||
2928 | dw 0x6055, IS_TORNADO or HAS_NWAY or EEPROM_8BIT or HAS_CB_FNS or INVERT_MII_PWR or HAS_HWCKSM ; 3c556 Laptop Tornado |
||
2929 | dw 0x6056, IS_TORNADO or HAS_NWAY or EEPROM_OFFSET or HAS_CB_FNS or INVERT_MII_PWR or HAS_HWCKSM ; 3c556B Laptop Hurricane |
||
2930 | dw 0x5b57, IS_BOOMERANG or HAS_MII or EEPROM_8BIT ; 3c575 [Megahertz] 10/100 LAN CardBus |
||
2931 | dw 0x5057, IS_BOOMERANG or HAS_MII or EEPROM_8BIT ; 3c575 Boomerang CardBus |
||
2932 | dw 0x5157, IS_CYCLONE or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_LED_PWR or HAS_HWCKSM ; 3CCFE575BT Cyclone CardBus |
||
2933 | dw 0x5257, IS_TORNADO or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR or MAX_COLLISION_RESET or HAS_HWCKSM ; 3CCFE575CT Tornado CardBus |
||
2934 | dw 0x6560, IS_CYCLONE or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR or INVERT_LED_PWR or HAS_HWCKSM ; 3CCFE656 Cyclone CardBus |
||
2935 | dw 0x6562, IS_CYCLONE or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR or INVERT_LED_PWR or HAS_HWCKSM ; 3CCFEM656B Cyclone+Winmodem CardBus |
||
2936 | dw 0x6564, IS_TORNADO or HAS_NWAY or HAS_CB_FNS or EEPROM_8BIT or INVERT_MII_PWR or MAX_COLLISION_RESET or HAS_HWCKSM ; 3CXFEM656C Tornado+Winmodem CardBus |
||
2937 | dw 0x4500, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c450 HomePNA Tornado |
||
2938 | dw 0x9201, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c920 Tornado |
||
2939 | dw 0x1201, IS_TORNADO or HAS_HWCKSM or HAS_NWAY ; 3c982 Hydra Dual Port A |
||
2940 | dw 0x1202, IS_TORNADO or HAS_HWCKSM or HAS_NWAY ; 3c982 Hydra Dual Port B |
||
2941 | dw 0x9056, IS_CYCLONE or HAS_NWAY or HAS_HWCKSM or EXTRA_PREAMBLE ; 3c905B-T4 |
||
2942 | dw 0x9210, IS_TORNADO or HAS_NWAY or HAS_HWCKSM ; 3c920B-EMB-WNM Tornado |
||
2943 | HW_VERSIONS_SIZE = $ - hw_versions |
||
2944 | |||
2945 | include_debug_strings ; All data wich FDO uses will be included here |
||
2946 | |||
2947 | section '.data' data readable writable align 16 ; place all uninitialized data place here |
||
2948 | |||
2949 | VORTEX_LIST rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling |
||
2950 | BOOMERANG_LIST rd MAX_DEVICES |
||
2951 | |||
2952 | |||
2953 | |||
2954 |