Subversion Repositories Kolibri OS

/*

 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.

 * All Rights Reserved.

 *

 * Permission is hereby granted, free of charge, to any person obtaining a

 * copy of this software and associated documentation files (the

 * "Software"), to deal in the Software without restriction, including

 * without limitation the rights to use, copy, modify, merge, publish,

 * distribute, sub license, and/or sell copies of the Software, and to

 * permit persons to whom the Software is furnished to do so, subject to

 * the following conditions:

 *

 * The above copyright notice and this permission notice (including the

 * next paragraph) shall be included in all copies or substantial portions

 * of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR

 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,

 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE

 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

 *

 */

#ifndef _I915_DRM_H_

#define _I915_DRM_H_

#include "drm.h"

/* Please note that modifications to all structs defined here are

 * subject to backwards-compatibility constraints.

 */

/**

 * DOC: uevents generated by i915 on it's device node

 *

 * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch

 *	event from the gpu l3 cache. Additional information supplied is ROW,

 *	BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep

 *	track of these events and if a specific cache-line seems to have a

 *	persistent error remap it with the l3 remapping tool supplied in

 *	intel-gpu-tools.  The value supplied with the event is always 1.

 *

 * I915_ERROR_UEVENT - Generated upon error detection, currently only via

 *	hangcheck. The error detection event is a good indicator of when things

 *	began to go badly. The value supplied with the event is a 1 upon error

 *	detection, and a 0 upon reset completion, signifying no more error

 *	exists. NOTE: Disabling hangcheck or reset via module parameter will

 *	cause the related events to not be seen.

 *

 * I915_RESET_UEVENT - Event is generated just before an attempt to reset the

 *	the GPU. The value supplied with the event is always 1. NOTE: Disable

 *	reset via module parameter will cause this event to not be seen.

 */

#define I915_L3_PARITY_UEVENT		"L3_PARITY_ERROR"

#define I915_ERROR_UEVENT		"ERROR"

#define I915_RESET_UEVENT		"RESET"

/* Each region is a minimum of 16k, and there are at most 255 of them.

 */

#define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use

				 * of chars for next/prev indices */

#define I915_LOG_MIN_TEX_REGION_SIZE 14

typedef struct _drm_i915_init {

	enum {

		I915_INIT_DMA = 0x01,

		I915_CLEANUP_DMA = 0x02,

		I915_RESUME_DMA = 0x03

	} func;

	unsigned int mmio_offset;

	int sarea_priv_offset;

	unsigned int ring_start;

	unsigned int ring_end;

	unsigned int ring_size;

	unsigned int front_offset;

	unsigned int back_offset;

	unsigned int depth_offset;

	unsigned int w;

	unsigned int h;

	unsigned int pitch;

	unsigned int pitch_bits;

	unsigned int back_pitch;

	unsigned int depth_pitch;

	unsigned int cpp;

	unsigned int chipset;

} drm_i915_init_t;

typedef struct _drm_i915_sarea {

	struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1];

	int last_upload;	/* last time texture was uploaded */

	int last_enqueue;	/* last time a buffer was enqueued */

	int last_dispatch;	/* age of the most recently dispatched buffer */

	int ctxOwner;		/* last context to upload state */

	int texAge;

	int pf_enabled;		/* is pageflipping allowed? */

	int pf_active;

	int pf_current_page;	/* which buffer is being displayed? */

	int perf_boxes;		/* performance boxes to be displayed */

	int width, height;      /* screen size in pixels */

	drm_handle_t front_handle;

	int front_offset;

	int front_size;

	drm_handle_t back_handle;

	int back_offset;

	int back_size;

	drm_handle_t depth_handle;

	int depth_offset;

	int depth_size;

	drm_handle_t tex_handle;

	int tex_offset;

	int tex_size;

	int log_tex_granularity;

	int pitch;

	int rotation;           /* 0, 90, 180 or 270 */

	int rotated_offset;

	int rotated_size;

	int rotated_pitch;

	int virtualX, virtualY;

	unsigned int front_tiled;

	unsigned int back_tiled;

	unsigned int depth_tiled;

	unsigned int rotated_tiled;

	unsigned int rotated2_tiled;

	int pipeA_x;

	int pipeA_y;

	int pipeA_w;

	int pipeA_h;

	int pipeB_x;

	int pipeB_y;

	int pipeB_w;

	int pipeB_h;

	/* fill out some space for old userspace triple buffer */

	drm_handle_t unused_handle;

	__u32 unused1, unused2, unused3;

	/* buffer object handles for static buffers. May change

	 * over the lifetime of the client.

	 */

	__u32 front_bo_handle;

	__u32 back_bo_handle;

	__u32 unused_bo_handle;

	__u32 depth_bo_handle;

} drm_i915_sarea_t;

/* due to userspace building against these headers we need some compat here */

#define planeA_x pipeA_x

#define planeA_y pipeA_y

#define planeA_w pipeA_w

#define planeA_h pipeA_h

#define planeB_x pipeB_x

#define planeB_y pipeB_y

#define planeB_w pipeB_w

#define planeB_h pipeB_h

/* Flags for perf_boxes

 */

#define I915_BOX_RING_EMPTY    		0x1

#define I915_BOX_FLIP          		0x2

#define I915_BOX_WAIT          		0x4

#define I915_BOX_TEXTURE_LOAD  		0x8

#define I915_BOX_LOST_CONTEXT  		0x10

/* I915 specific ioctls

 * The device specific ioctl range is 0x40 to 0x79.

 */

#define DRM_I915_INIT			0x00

#define DRM_I915_FLUSH			0x01

#define DRM_I915_FLIP			0x02

#define DRM_I915_BATCHBUFFER		0x03

#define DRM_I915_IRQ_EMIT		0x04

#define DRM_I915_IRQ_WAIT		0x05

#define DRM_I915_GETPARAM		0x06

#define DRM_I915_SETPARAM		0x07

#define DRM_I915_ALLOC			0x08

#define DRM_I915_FREE			0x09

#define DRM_I915_INIT_HEAP		0x0a

#define DRM_I915_CMDBUFFER		0x0b

#define DRM_I915_DESTROY_HEAP		0x0c

#define DRM_I915_SET_VBLANK_PIPE	0x0d

#define DRM_I915_GET_VBLANK_PIPE	0x0e

#define DRM_I915_VBLANK_SWAP		0x0f

#define DRM_I915_HWS_ADDR		0x11

#define DRM_I915_GEM_INIT		0x13

#define DRM_I915_GEM_EXECBUFFER		0x14

#define DRM_I915_GEM_PIN		0x15

#define DRM_I915_GEM_UNPIN		0x16

#define DRM_I915_GEM_BUSY		0x17

#define DRM_I915_GEM_THROTTLE		0x18

#define DRM_I915_GEM_ENTERVT		0x19

#define DRM_I915_GEM_LEAVEVT		0x1a

#define DRM_I915_GEM_CREATE		0x1b

#define DRM_I915_GEM_PREAD		0x1c

#define DRM_I915_GEM_PWRITE		0x1d

#define DRM_I915_GEM_MMAP		0x1e

#define DRM_I915_GEM_SET_DOMAIN		0x1f

#define DRM_I915_GEM_SW_FINISH		0x20

#define DRM_I915_GEM_SET_TILING		0x21

#define DRM_I915_GEM_GET_TILING		0x22

#define DRM_I915_GEM_GET_APERTURE 	0x23

#define DRM_I915_GEM_MMAP_GTT		0x24

#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25

#define DRM_I915_GEM_MADVISE		0x26

#define DRM_I915_OVERLAY_PUT_IMAGE	0x27

#define DRM_I915_OVERLAY_ATTRS		0x28

#define DRM_I915_GEM_EXECBUFFER2	0x29

#define DRM_I915_GET_SPRITE_COLORKEY	0x2a

#define DRM_I915_SET_SPRITE_COLORKEY	0x2b

#define DRM_I915_GEM_WAIT		0x2c

#define DRM_I915_GEM_CONTEXT_CREATE	0x2d

#define DRM_I915_GEM_CONTEXT_DESTROY	0x2e

#define DRM_I915_GEM_SET_CACHING	0x2f

#define DRM_I915_GEM_GET_CACHING	0x30

#define DRM_I915_REG_READ		0x31

#define DRM_I915_GET_RESET_STATS	0x32

#define DRM_IOCTL_I915_INIT

#define DRM_IOCTL_I915_FLUSH

#define DRM_IOCTL_I915_FLIP

#define DRM_IOCTL_I915_BATCHBUFFER

#define DRM_IOCTL_I915_IRQ_EMIT

#define DRM_IOCTL_I915_IRQ_WAIT

#define DRM_IOCTL_I915_GETPARAM                SRV_I915_GET_PARAM

#define DRM_IOCTL_I915_SETPARAM

#define DRM_IOCTL_I915_ALLOC

#define DRM_IOCTL_I915_FREE

#define DRM_IOCTL_I915_INIT_HEAP

#define DRM_IOCTL_I915_CMDBUFFER

#define DRM_IOCTL_I915_DESTROY_HEAP

#define DRM_IOCTL_I915_SET_VBLANK_PIPE

#define DRM_IOCTL_I915_GET_VBLANK_PIPE

#define DRM_IOCTL_I915_VBLANK_SWAP

#define DRM_IOCTL_I915_HWS_ADDR

#define DRM_IOCTL_I915_GEM_INIT

#define DRM_IOCTL_I915_GEM_EXECBUFFER

#define DRM_IOCTL_I915_GEM_EXECBUFFER2          SRV_I915_GEM_EXECBUFFER2

#define DRM_IOCTL_I915_GEM_PIN                  SRV_I915_GEM_PIN

#define DRM_IOCTL_I915_GEM_UNPIN                SRV_I915_GEM_UNPIN

#define DRM_IOCTL_I915_GEM_BUSY                 SRV_I915_GEM_BUSY

#define DRM_IOCTL_I915_GEM_SET_CACHEING         SRV_I915_GEM_SET_CACHING

#define DRM_IOCTL_I915_GEM_GET_CACHEING

#define DRM_IOCTL_I915_GEM_THROTTLE             SRV_I915_GEM_THROTTLE

#define DRM_IOCTL_I915_GEM_ENTERVT

#define DRM_IOCTL_I915_GEM_LEAVEVT

#define DRM_IOCTL_I915_GEM_CREATE               SRV_I915_GEM_CREATE

#define DRM_IOCTL_I915_GEM_PREAD

#define DRM_IOCTL_I915_GEM_PWRITE               SRV_I915_GEM_PWRITE

#define DRM_IOCTL_I915_GEM_MMAP                 SRV_I915_GEM_MMAP

#define DRM_IOCTL_I915_GEM_MMAP_GTT             SRV_I915_GEM_MMAP_GTT

#define DRM_IOCTL_I915_GEM_SET_DOMAIN           SRV_I915_GEM_SET_DOMAIN

#define DRM_IOCTL_I915_GEM_SW_FINISH

#define DRM_IOCTL_I915_GEM_SET_TILING           SRV_I915_GEM_SET_TILING

#define DRM_IOCTL_I915_GEM_GET_TILING           SRV_I915_GEM_GET_TILING

#define DRM_IOCTL_I915_GEM_GET_APERTURE         SRV_I915_GEM_GET_APERTURE

#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID

#define DRM_IOCTL_I915_GEM_MADVISE

#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE

#define DRM_IOCTL_I915_OVERLAY_ATTRS

#define DRM_IOCTL_I915_SET_SPRITE_COLORKEY

#define DRM_IOCTL_I915_GET_SPRITE_COLORKEY

#define DRM_IOCTL_I915_GEM_WAIT                 SRV_I915_GEM_WAIT

#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE       SRV_I915_GEM_CONTEXT_CREATE

#define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY      SRV_I915_GEM_CONTEXT_DESTROY

#define DRM_IOCTL_I915_REG_READ                 SRV_I915_REG_READ

/* Allow drivers to submit batchbuffers directly to hardware, relying

 * on the security mechanisms provided by hardware.

 */

typedef struct drm_i915_batchbuffer {

	int start;		/* agp offset */

	int used;		/* nr bytes in use */

	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */

	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */

	int num_cliprects;	/* mulitpass with multiple cliprects? */

	struct drm_clip_rect *cliprects;	/* pointer to userspace cliprects */

} drm_i915_batchbuffer_t;

/* As above, but pass a pointer to userspace buffer which can be

 * validated by the kernel prior to sending to hardware.

 */

typedef struct _drm_i915_cmdbuffer {

	char *buf;	/* pointer to userspace command buffer */

	int sz;			/* nr bytes in buf */

	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */

	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */

	int num_cliprects;	/* mulitpass with multiple cliprects? */

	struct drm_clip_rect *cliprects;	/* pointer to userspace cliprects */

} drm_i915_cmdbuffer_t;

/* Userspace can request & wait on irq's:

 */

typedef struct drm_i915_irq_emit {

	int *irq_seq;

} drm_i915_irq_emit_t;

typedef struct drm_i915_irq_wait {

	int irq_seq;

} drm_i915_irq_wait_t;

/* Ioctl to query kernel params:

 */

#define I915_PARAM_IRQ_ACTIVE            1

#define I915_PARAM_ALLOW_BATCHBUFFER     2

#define I915_PARAM_LAST_DISPATCH         3

#define I915_PARAM_CHIPSET_ID            4

#define I915_PARAM_HAS_GEM               5

#define I915_PARAM_NUM_FENCES_AVAIL      6

#define I915_PARAM_HAS_OVERLAY           7

#define I915_PARAM_HAS_PAGEFLIPPING	 8

#define I915_PARAM_HAS_EXECBUF2          9

#define I915_PARAM_HAS_BSD		 10

#define I915_PARAM_HAS_BLT		 11

#define I915_PARAM_HAS_RELAXED_FENCING	 12

#define I915_PARAM_HAS_COHERENT_RINGS	 13

#define I915_PARAM_HAS_EXEC_CONSTANTS	 14

#define I915_PARAM_HAS_RELAXED_DELTA	 15

#define I915_PARAM_HAS_GEN7_SOL_RESET	 16

#define I915_PARAM_HAS_LLC     	 	 17

#define I915_PARAM_HAS_ALIASING_PPGTT	 18

#define I915_PARAM_HAS_WAIT_TIMEOUT	 19

#define I915_PARAM_HAS_SEMAPHORES	 20

#define I915_PARAM_HAS_PRIME_VMAP_FLUSH	 21

#define I915_PARAM_HAS_VEBOX            22

#define I915_PARAM_HAS_SECURE_BATCHES	 23

#define I915_PARAM_HAS_PINNED_BATCHES	 24

#define I915_PARAM_HAS_EXEC_NO_RELOC	 25

#define I915_PARAM_HAS_EXEC_HANDLE_LUT   26

#define I915_PARAM_HAS_WT     	 	 27

#define I915_PARAM_CMD_PARSER_VERSION	 28

typedef struct drm_i915_getparam {

	int param;

	int *value;

} drm_i915_getparam_t;

/* Ioctl to set kernel params:

 */

#define I915_SETPARAM_USE_MI_BATCHBUFFER_START            1

#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY             2

#define I915_SETPARAM_ALLOW_BATCHBUFFER                   3

#define I915_SETPARAM_NUM_USED_FENCES                     4

typedef struct drm_i915_setparam {

	int param;

	int value;

} drm_i915_setparam_t;

/* A memory manager for regions of shared memory:

 */

#define I915_MEM_REGION_AGP 1

typedef struct drm_i915_mem_alloc {

	int region;

	int alignment;

	int size;

	int *region_offset;	/* offset from start of fb or agp */

} drm_i915_mem_alloc_t;

typedef struct drm_i915_mem_free {

	int region;

	int region_offset;

} drm_i915_mem_free_t;

typedef struct drm_i915_mem_init_heap {

	int region;

	int size;

	int start;

} drm_i915_mem_init_heap_t;

/* Allow memory manager to be torn down and re-initialized (eg on

 * rotate):

 */

typedef struct drm_i915_mem_destroy_heap {

	int region;

} drm_i915_mem_destroy_heap_t;

/* Allow X server to configure which pipes to monitor for vblank signals

 */

#define	DRM_I915_VBLANK_PIPE_A	1

#define	DRM_I915_VBLANK_PIPE_B	2

typedef struct drm_i915_vblank_pipe {

	int pipe;

} drm_i915_vblank_pipe_t;

/* Schedule buffer swap at given vertical blank:

 */

typedef struct drm_i915_vblank_swap {

	drm_drawable_t drawable;

	enum drm_vblank_seq_type seqtype;

	unsigned int sequence;

} drm_i915_vblank_swap_t;

typedef struct drm_i915_hws_addr {

	__u64 addr;

} drm_i915_hws_addr_t;

struct drm_i915_gem_init {

	/**

	 * Beginning offset in the GTT to be managed by the DRM memory

	 * manager.

	 */

	__u64 gtt_start;

	/**

	 * Ending offset in the GTT to be managed by the DRM memory

	 * manager.

	 */

	__u64 gtt_end;

};

struct drm_i915_gem_create {

	/**

	 * Requested size for the object.

	 *

	 * The (page-aligned) allocated size for the object will be returned.

	 */

	__u64 size;

	/**

	 * Returned handle for the object.

	 *

	 * Object handles are nonzero.

	 */

	__u32 handle;

	__u32 pad;

};

struct drm_i915_gem_pread {

	/** Handle for the object being read. */

	__u32 handle;

	__u32 pad;

	/** Offset into the object to read from */

	__u64 offset;

	/** Length of data to read */

	__u64 size;

	/**

	 * Pointer to write the data into.

	 *

	 * This is a fixed-size type for 32/64 compatibility.

	 */

	__u64 data_ptr;

};

struct drm_i915_gem_pwrite {

	/** Handle for the object being written to. */

	__u32 handle;

	__u32 pad;

	/** Offset into the object to write to */

	__u64 offset;

	/** Length of data to write */

	__u64 size;

	/**

	 * Pointer to read the data from.

	 *

	 * This is a fixed-size type for 32/64 compatibility.

	 */

	__u64 data_ptr;

};

struct drm_i915_gem_mmap {

	/** Handle for the object being mapped. */

	__u32 handle;

	__u32 pad;

	/** Offset in the object to map. */

	__u64 offset;

	/**

	 * Length of data to map.

	 *

	 * The value will be page-aligned.

	 */

	__u64 size;

	/**

	 * Returned pointer the data was mapped at.

	 *

	 * This is a fixed-size type for 32/64 compatibility.

	 */

	__u64 addr_ptr;

};

struct drm_i915_gem_mmap_gtt {

	/** Handle for the object being mapped. */

	__u32 handle;

	__u32 pad;

	/**

	 * Fake offset to use for subsequent mmap call

	 *

	 * This is a fixed-size type for 32/64 compatibility.

	 */

	__u64 offset;

};

struct drm_i915_gem_set_domain {

	/** Handle for the object */

	__u32 handle;

	/** New read domains */

	__u32 read_domains;

	/** New write domain */

	__u32 write_domain;

};

struct drm_i915_gem_sw_finish {

	/** Handle for the object */

	__u32 handle;

};

struct drm_i915_gem_relocation_entry {

	/**

	 * Handle of the buffer being pointed to by this relocation entry.

	 *

	 * It's appealing to make this be an index into the mm_validate_entry

	 * list to refer to the buffer, but this allows the driver to create

	 * a relocation list for state buffers and not re-write it per

	 * exec using the buffer.

	 */

	__u32 target_handle;

	/**

	 * Value to be added to the offset of the target buffer to make up

	 * the relocation entry.

	 */

	__u32 delta;

	/** Offset in the buffer the relocation entry will be written into */

	__u64 offset;

	/**

	 * Offset value of the target buffer that the relocation entry was last

	 * written as.

	 *

	 * If the buffer has the same offset as last time, we can skip syncing

	 * and writing the relocation.  This value is written back out by

	 * the execbuffer ioctl when the relocation is written.

	 */

	__u64 presumed_offset;

	/**

	 * Target memory domains read by this operation.

	 */

	__u32 read_domains;

	/**

	 * Target memory domains written by this operation.

	 *

	 * Note that only one domain may be written by the whole

	 * execbuffer operation, so that where there are conflicts,

	 * the application will get -EINVAL back.

	 */

	__u32 write_domain;

};

/** @{

 * Intel memory domains

 *

 * Most of these just align with the various caches in

 * the system and are used to flush and invalidate as

 * objects end up cached in different domains.

 */

/** CPU cache */

#define I915_GEM_DOMAIN_CPU		0x00000001

/** Render cache, used by 2D and 3D drawing */

#define I915_GEM_DOMAIN_RENDER		0x00000002

/** Sampler cache, used by texture engine */

#define I915_GEM_DOMAIN_SAMPLER		0x00000004

/** Command queue, used to load batch buffers */

#define I915_GEM_DOMAIN_COMMAND		0x00000008

/** Instruction cache, used by shader programs */

#define I915_GEM_DOMAIN_INSTRUCTION	0x00000010

/** Vertex address cache */

#define I915_GEM_DOMAIN_VERTEX		0x00000020

/** GTT domain - aperture and scanout */

#define I915_GEM_DOMAIN_GTT		0x00000040

/** @} */

struct drm_i915_gem_exec_object {

	/**

	 * User's handle for a buffer to be bound into the GTT for this

	 * operation.

	 */

	__u32 handle;

	/** Number of relocations to be performed on this buffer */

	__u32 relocation_count;

	/**

	 * Pointer to array of struct drm_i915_gem_relocation_entry containing

	 * the relocations to be performed in this buffer.

	 */

	__u64 relocs_ptr;

	/** Required alignment in graphics aperture */

	__u64 alignment;

	/**

	 * Returned value of the updated offset of the object, for future

	 * presumed_offset writes.

	 */

	__u64 offset;

};

struct drm_i915_gem_execbuffer {

	/**

	 * List of buffers to be validated with their relocations to be

	 * performend on them.

	 *

	 * This is a pointer to an array of struct drm_i915_gem_validate_entry.

	 *

	 * These buffers must be listed in an order such that all relocations

	 * a buffer is performing refer to buffers that have already appeared

	 * in the validate list.

	 */

	__u64 buffers_ptr;

	__u32 buffer_count;

	/** Offset in the batchbuffer to start execution from. */

	__u32 batch_start_offset;

	/** Bytes used in batchbuffer from batch_start_offset */

	__u32 batch_len;

	__u32 DR1;

	__u32 DR4;

	__u32 num_cliprects;

	/** This is a struct drm_clip_rect *cliprects */

	__u64 cliprects_ptr;

};

struct drm_i915_gem_exec_object2 {

	/**

	 * User's handle for a buffer to be bound into the GTT for this

	 * operation.

	 */

	__u32 handle;

	/** Number of relocations to be performed on this buffer */

	__u32 relocation_count;

	/**

	 * Pointer to array of struct drm_i915_gem_relocation_entry containing

	 * the relocations to be performed in this buffer.

	 */

	__u64 relocs_ptr;

	/** Required alignment in graphics aperture */

	__u64 alignment;

	/**

	 * Returned value of the updated offset of the object, for future

	 * presumed_offset writes.

	 */

	__u64 offset;

#define EXEC_OBJECT_NEEDS_FENCE (1<<0)

#define EXEC_OBJECT_NEEDS_GTT	(1<<1)

#define EXEC_OBJECT_WRITE	(1<<2)

#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_WRITE<<1)

	__u64 flags;

	__u64 rsvd1;

	__u64 rsvd2;

};

struct drm_i915_gem_execbuffer2 {

	/**

	 * List of gem_exec_object2 structs

	 */

	__u64 buffers_ptr;

	__u32 buffer_count;

	/** Offset in the batchbuffer to start execution from. */

	__u32 batch_start_offset;

	/** Bytes used in batchbuffer from batch_start_offset */

	__u32 batch_len;

	__u32 DR1;

	__u32 DR4;

	__u32 num_cliprects;

	/** This is a struct drm_clip_rect *cliprects */

	__u64 cliprects_ptr;

#define I915_EXEC_RING_MASK              (7<<0)

#define I915_EXEC_DEFAULT                (0<<0)

#define I915_EXEC_RENDER                 (1<<0)

#define I915_EXEC_BSD                    (2<<0)

#define I915_EXEC_BLT                    (3<<0)

#define I915_EXEC_VEBOX                  (4<<0)

/* Used for switching the constants addressing mode on gen4+ RENDER ring.

 * Gen6+ only supports relative addressing to dynamic state (default) and

 * absolute addressing.

 *

 * These flags are ignored for the BSD and BLT rings.

 */

#define I915_EXEC_CONSTANTS_MASK 	(3<<6)

#define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */

#define I915_EXEC_CONSTANTS_ABSOLUTE 	(1<<6)

#define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */

	__u64 flags;

	__u64 rsvd1; /* now used for context info */

	__u64 rsvd2;

};

/** Resets the SO write offset registers for transform feedback on gen7. */

#define I915_EXEC_GEN7_SOL_RESET	(1<<8)

/** Request a privileged ("secure") batch buffer. Note only available for

 * DRM_ROOT_ONLY | DRM_MASTER processes.

 */

#define I915_EXEC_SECURE		(1<<9)

/** Inform the kernel that the batch is and will always be pinned. This

 * negates the requirement for a workaround to be performed to avoid

 * an incoherent CS (such as can be found on 830/845). If this flag is

 * not passed, the kernel will endeavour to make sure the batch is

 * coherent with the CS before execution. If this flag is passed,

 * userspace assumes the responsibility for ensuring the same.

 */

#define I915_EXEC_IS_PINNED		(1<<10)

/** Provide a hint to the kernel that the command stream and auxiliary

 * state buffers already holds the correct presumed addresses and so the

 * relocation process may be skipped if no buffers need to be moved in

 * preparation for the execbuffer.

 */

#define I915_EXEC_NO_RELOC		(1<<11)

/** Use the reloc.handle as an index into the exec object array rather

 * than as the per-file handle.

 */

#define I915_EXEC_HANDLE_LUT		(1<<12)

#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_HANDLE_LUT<<1)

#define I915_EXEC_CONTEXT_ID_MASK	(0xffffffff)

#define i915_execbuffer2_set_context_id(eb2, context) \

	(eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK

#define i915_execbuffer2_get_context_id(eb2) \

	((eb2).rsvd1 & I915_EXEC_CONTEXT_ID_MASK)

struct drm_i915_gem_pin {

	/** Handle of the buffer to be pinned. */

	__u32 handle;

	__u32 pad;

	/** alignment required within the aperture */

	__u64 alignment;

	/** Returned GTT offset of the buffer. */

	__u64 offset;

};

struct drm_i915_gem_unpin {

	/** Handle of the buffer to be unpinned. */

	__u32 handle;

	__u32 pad;

};

struct drm_i915_gem_busy {

	/** Handle of the buffer to check for busy */

	__u32 handle;

	/** Return busy status (1 if busy, 0 if idle).

	 * The high word is used to indicate on which rings the object

	 * currently resides:

	 *  16:31 - busy (r or r/w) rings (16 render, 17 bsd, 18 blt, etc)

	 */

	__u32 busy;

};

/**

 * I915_CACHING_NONE

 *

 * GPU access is not coherent with cpu caches. Default for machines without an

 * LLC.

 */

#define I915_CACHING_NONE		0

/**

 * I915_CACHING_CACHED

 *

 * GPU access is coherent with cpu caches and furthermore the data is cached in

 * last-level caches shared between cpu cores and the gpu GT. Default on

 * machines with HAS_LLC.

 */

#define I915_CACHING_CACHED		1

/**

 * I915_CACHING_DISPLAY

 *

 * Special GPU caching mode which is coherent with the scanout engines.

 * Transparently falls back to I915_CACHING_NONE on platforms where no special

 * cache mode (like write-through or gfdt flushing) is available. The kernel

 * automatically sets this mode when using a buffer as a scanout target.

 * Userspace can manually set this mode to avoid a costly stall and clflush in

 * the hotpath of drawing the first frame.

 */

#define I915_CACHING_DISPLAY		2

struct drm_i915_gem_caching {

	/**

	 * Handle of the buffer to set/get the caching level of. */

	__u32 handle;

	/**

	 * Cacheing level to apply or return value

	 *

	 * bits0-15 are for generic caching control (i.e. the above defined

	 * values). bits16-31 are reserved for platform-specific variations

	 * (e.g. l3$ caching on gen7). */

	__u32 caching;

};

#define I915_TILING_NONE	0

#define I915_TILING_X		1

#define I915_TILING_Y		2

#define I915_BIT_6_SWIZZLE_NONE		0

#define I915_BIT_6_SWIZZLE_9		1

#define I915_BIT_6_SWIZZLE_9_10		2

#define I915_BIT_6_SWIZZLE_9_11		3

#define I915_BIT_6_SWIZZLE_9_10_11	4

/* Not seen by userland */

#define I915_BIT_6_SWIZZLE_UNKNOWN	5

/* Seen by userland. */

#define I915_BIT_6_SWIZZLE_9_17		6

#define I915_BIT_6_SWIZZLE_9_10_17	7

struct drm_i915_gem_set_tiling {

	/** Handle of the buffer to have its tiling state updated */

	__u32 handle;

	/**

	 * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X,

	 * I915_TILING_Y).

	 *

	 * This value is to be set on request, and will be updated by the

	 * kernel on successful return with the actual chosen tiling layout.

	 *

	 * The tiling mode may be demoted to I915_TILING_NONE when the system

	 * has bit 6 swizzling that can't be managed correctly by GEM.

	 *

	 * Buffer contents become undefined when changing tiling_mode.

	 */

	__u32 tiling_mode;

	/**

	 * Stride in bytes for the object when in I915_TILING_X or

	 * I915_TILING_Y.

	 */

	__u32 stride;

	/**

	 * Returned address bit 6 swizzling required for CPU access through

	 * mmap mapping.

	 */

	__u32 swizzle_mode;

};

struct drm_i915_gem_get_tiling {

	/** Handle of the buffer to get tiling state for. */

	__u32 handle;

	/**

	 * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X,

	 * I915_TILING_Y).

	 */

	__u32 tiling_mode;

	/**

	 * Returned address bit 6 swizzling required for CPU access through

	 * mmap mapping.

	 */

	__u32 swizzle_mode;

};

struct drm_i915_gem_get_aperture {

	/** Total size of the aperture used by i915_gem_execbuffer, in bytes */

	__u64 aper_size;

	/**

	 * Available space in the aperture used by i915_gem_execbuffer, in

	 * bytes

	 */

	__u64 aper_available_size;

};

struct drm_i915_get_pipe_from_crtc_id {

	/** ID of CRTC being requested **/

	__u32 crtc_id;

	/** pipe of requested CRTC **/

	__u32 pipe;

};

#define I915_MADV_WILLNEED 0

#define I915_MADV_DONTNEED 1

#define __I915_MADV_PURGED 2 /* internal state */

struct drm_i915_gem_madvise {

	/** Handle of the buffer to change the backing store advice */

	__u32 handle;

	/* Advice: either the buffer will be needed again in the near future,

	 *         or wont be and could be discarded under memory pressure.

	 */

	__u32 madv;

	/** Whether the backing store still exists. */

	__u32 retained;

};

/* flags */

#define I915_OVERLAY_TYPE_MASK 		0xff

#define I915_OVERLAY_YUV_PLANAR 	0x01

#define I915_OVERLAY_YUV_PACKED 	0x02

#define I915_OVERLAY_RGB		0x03

#define I915_OVERLAY_DEPTH_MASK		0xff00

#define I915_OVERLAY_RGB24		0x1000

#define I915_OVERLAY_RGB16		0x2000

#define I915_OVERLAY_RGB15		0x3000

#define I915_OVERLAY_YUV422		0x0100

#define I915_OVERLAY_YUV411		0x0200

#define I915_OVERLAY_YUV420		0x0300

#define I915_OVERLAY_YUV410		0x0400

#define I915_OVERLAY_SWAP_MASK		0xff0000

#define I915_OVERLAY_NO_SWAP		0x000000

#define I915_OVERLAY_UV_SWAP		0x010000

#define I915_OVERLAY_Y_SWAP		0x020000

#define I915_OVERLAY_Y_AND_UV_SWAP	0x030000

#define I915_OVERLAY_FLAGS_MASK		0xff000000

#define I915_OVERLAY_ENABLE		0x01000000

struct drm_intel_overlay_put_image {

	/* various flags and src format description */

	__u32 flags;

	/* source picture description */

	__u32 bo_handle;

	/* stride values and offsets are in bytes, buffer relative */

	__u16 stride_Y; /* stride for packed formats */

	__u16 stride_UV;

	__u32 offset_Y; /* offset for packet formats */

	__u32 offset_U;

	__u32 offset_V;

	/* in pixels */

	__u16 src_width;

	__u16 src_height;

	/* to compensate the scaling factors for partially covered surfaces */

	__u16 src_scan_width;

	__u16 src_scan_height;

	/* output crtc description */

	__u32 crtc_id;

	__u16 dst_x;

	__u16 dst_y;

	__u16 dst_width;

	__u16 dst_height;

};

/* flags */

#define I915_OVERLAY_UPDATE_ATTRS	(1<<0)

#define I915_OVERLAY_UPDATE_GAMMA	(1<<1)

struct drm_intel_overlay_attrs {

	__u32 flags;

	__u32 color_key;

	__s32 brightness;

	__u32 contrast;

	__u32 saturation;

	__u32 gamma0;

	__u32 gamma1;

	__u32 gamma2;

	__u32 gamma3;

	__u32 gamma4;

	__u32 gamma5;

};

/*

 * Intel sprite handling

 *

 * Color keying works with a min/mask/max tuple.  Both source and destination

 * color keying is allowed.

 *

 * Source keying:

 * Sprite pixels within the min & max values, masked against the color channels

 * specified in the mask field, will be transparent.  All other pixels will

 * be displayed on top of the primary plane.  For RGB surfaces, only the min

 * and mask fields will be used; ranged compares are not allowed.

 *

 * Destination keying:

 * Primary plane pixels that match the min value, masked against the color

 * channels specified in the mask field, will be replaced by corresponding

 * pixels from the sprite plane.

 *

 * Note that source & destination keying are exclusive; only one can be

 * active on a given plane.

 */

#define I915_SET_COLORKEY_NONE		(1<<0) /* disable color key matching */

#define I915_SET_COLORKEY_DESTINATION	(1<<1)

#define I915_SET_COLORKEY_SOURCE	(1<<2)

struct drm_intel_sprite_colorkey {

	__u32 plane_id;

	__u32 min_value;

	__u32 channel_mask;

	__u32 max_value;

	__u32 flags;

};

struct drm_i915_gem_wait {

	/** Handle of BO we shall wait on */

	__u32 bo_handle;

	__u32 flags;

	/** Number of nanoseconds to wait, Returns time remaining. */

	__s64 timeout_ns;

};

struct drm_i915_gem_context_create {

	/*  output: id of new context*/

	__u32 ctx_id;

	__u32 pad;

};

struct drm_i915_gem_context_destroy {

	__u32 ctx_id;

	__u32 pad;

};

struct drm_i915_reg_read {

	__u64 offset;

	__u64 val; /* Return value */

};

struct drm_i915_reset_stats {

	__u32 ctx_id;

	__u32 flags;

	/* All resets since boot/module reload, for all contexts */

	__u32 reset_count;

	/* Number of batches lost when active in GPU, for this context */

	__u32 batch_active;

	/* Number of batches lost pending for execution, for this context */

	__u32 batch_pending;

	__u32 pad;

};

struct drm_i915_mask {

    __u32 handle;

    __u32 width;

    __u32 height;

    __u32 bo_size;

    __u32 bo_pitch;

    __u32 bo_map;

};

struct drm_i915_fb_info {

    __u32 name;

    __u32 width;

    __u32 height;

    __u32 pitch;

    __u32 tiling;

    __u32 crtc;

    __u32 pipe;

};

struct drm_i915_mask_update {

    __u32 handle;

    __u32 dx;

    __u32 dy;

    __u32 width;

    __u32 height;

    __u32 bo_pitch;

    __u32 bo_map;

};

#endif				/* _I915_DRM_H_ */