Rev 5363 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
3545 | hidnplayr | 1 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
2 | ;; ;; |
||
5363 | yogev_ezra | 3 | ;; Copyright (C) KolibriOS team 2004-2015. All rights reserved. ;; |
3545 | hidnplayr | 4 | ;; Distributed under terms of the GNU General Public License ;; |
5 | ;; ;; |
||
6 | ;; RTL8029/ne2000 driver for KolibriOS ;; |
||
7 | ;; ;; |
||
8 | ;; based on RTL8029.asm driver for menuetos ;; |
||
9 | ;; and realtek8029.asm for SolarOS by Eugen Brasoveanu ;; |
||
10 | ;; ;; |
||
11 | ;; Written by hidnplayr@kolibrios.org ;; |
||
12 | ;; with help from CleverMouse ;; |
||
13 | ;; ;; |
||
14 | ;; GNU GENERAL PUBLIC LICENSE ;; |
||
15 | ;; Version 2, June 1991 ;; |
||
16 | ;; ;; |
||
17 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
18 | |||
5005 | hidnplayr | 19 | format PE DLL native |
20 | entry START |
||
3545 | hidnplayr | 21 | |
5005 | hidnplayr | 22 | CURRENT_API = 0x0200 |
23 | COMPATIBLE_API = 0x0100 |
||
24 | API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API |
||
3545 | hidnplayr | 25 | |
26 | MAX_DEVICES = 16 |
||
27 | |||
28 | DEBUG = 1 |
||
29 | __DEBUG__ = 1 |
||
3856 | hidnplayr | 30 | __DEBUG_LEVEL__ = 2 ; 1 = verbose, 2 = errors only |
3545 | hidnplayr | 31 | |
5005 | hidnplayr | 32 | section '.flat' readable writable executable |
33 | |||
4467 | hidnplayr | 34 | include '../struct.inc' |
35 | include '../macros.inc' |
||
3545 | hidnplayr | 36 | include '../proc32.inc' |
37 | include '../fdo.inc' |
||
5074 | hidnplayr | 38 | include '../netdrv.inc' |
3545 | hidnplayr | 39 | |
5005 | hidnplayr | 40 | struct device ETH_DEVICE |
3545 | hidnplayr | 41 | |
5005 | hidnplayr | 42 | io_addr dd ? |
43 | irq_line db ? |
||
44 | pci_bus dd ? |
||
45 | pci_dev dd ? |
||
3545 | hidnplayr | 46 | |
5005 | hidnplayr | 47 | flags db ? |
48 | vendor db ? |
||
3545 | hidnplayr | 49 | |
5005 | hidnplayr | 50 | memsize db ? |
51 | rx_start db ? |
||
52 | tx_start db ? |
||
53 | bmem dd ? |
||
54 | rmem dd ? |
||
3545 | hidnplayr | 55 | |
5005 | hidnplayr | 56 | ends |
3545 | hidnplayr | 57 | |
58 | P0_COMMAND = 0x00 |
||
59 | P0_PSTART = 0x01 |
||
60 | P0_PSTOP = 0x02 |
||
61 | P0_BOUND = 0x03 |
||
62 | P0_TSR = 0x04 |
||
63 | P0_TPSR = 0x04 |
||
64 | P0_TBCR0 = 0x05 |
||
65 | P0_TBCR1 = 0x06 |
||
66 | P0_ISR = 0x07 |
||
67 | P0_RSAR0 = 0x08 |
||
68 | P0_RSAR1 = 0x09 |
||
69 | P0_RBCR0 = 0x0A |
||
70 | P0_RBCR1 = 0x0B |
||
71 | P0_RSR = 0x0C |
||
72 | P0_RCR = 0x0C |
||
73 | P0_TCR = 0x0D |
||
74 | P0_DCR = 0x0E |
||
75 | P0_IMR = 0x0F |
||
76 | |||
77 | P1_COMMAND = 0x00 |
||
78 | P1_PAR0 = 0x01 |
||
79 | P1_PAR1 = 0x02 |
||
80 | P1_PAR2 = 0x03 |
||
81 | P1_PAR3 = 0x04 |
||
82 | P1_PAR4 = 0x05 |
||
83 | P1_PAR5 = 0x06 |
||
84 | P1_CURR = 0x07 |
||
85 | P1_MAR0 = 0x08 |
||
86 | |||
87 | CMD_PS0 = 0x00 ; Page 0 select |
||
88 | CMD_PS1 = 0x40 ; Page 1 select |
||
89 | CMD_PS2 = 0x80 ; Page 2 select |
||
90 | CMD_RD2 = 0x20 ; Remote DMA control |
||
91 | CMD_RD1 = 0x10 |
||
92 | CMD_RD0 = 0x08 |
||
93 | CMD_TXP = 0x04 ; transmit packet |
||
94 | CMD_STA = 0x02 ; start |
||
95 | CMD_STP = 0x01 ; stop |
||
96 | |||
97 | CMD_RDMA_READ = 001b shl 3 |
||
98 | CMD_RDMA_WRITE = 010b shl 3 |
||
99 | CMD_RDMA_SEND_PACKET = 011b shl 3 |
||
100 | CMD_RDMA_ABORT = 100b shl 3 ; really is 1xx, Abort/Complete Remote DMA |
||
101 | ; RDMA_MASK = 111b shl 3 ; internal, mask |
||
102 | |||
103 | RCR_MON = 0x20 ; monitor mode |
||
104 | |||
105 | DCR_FT1 = 0x40 |
||
106 | DCR_LS = 0x08 ; Loopback select |
||
107 | DCR_WTS = 0x01 ; Word transfer select |
||
108 | |||
109 | ISR_PRX = 0x01 ; successful recv |
||
110 | ISR_PTX = 0x02 ; successful xmit |
||
111 | ISR_RXE = 0x04 ; receive error |
||
112 | ISR_TXE = 0x08 ; transmit error |
||
113 | ISR_OVW = 0x10 ; Overflow |
||
114 | ISR_CNT = 0x20 ; Counter overflow |
||
115 | ISR_RDC = 0x40 ; Remote DMA complete |
||
116 | ISR_RST = 0x80 ; reset |
||
117 | |||
118 | IRQ_MASK = ISR_PRX ;+ ISR_PTX ;+ ISR_RDC + ISR_PTX + ISR_TXE |
||
119 | |||
120 | RSTAT_PRX = 1 shl 0 ; successful recv |
||
121 | RSTAT_CRC = 1 shl 1 ; CRC error |
||
122 | RSTAT_FAE = 1 shl 2 ; Frame alignment error |
||
123 | RSTAT_OVER = 1 shl 3 ; FIFO overrun |
||
124 | |||
125 | TXBUF_SIZE = 6 |
||
126 | RXBUF_END = 32 |
||
127 | PAGE_SIZE = 256 |
||
128 | |||
129 | ETH_ZLEN = 60 |
||
130 | ETH_FRAME_LEN = 1514 |
||
131 | |||
132 | FLAG_PIO = 1 shl 0 |
||
133 | FLAG_16BIT = 1 shl 1 |
||
134 | |||
135 | VENDOR_NONE = 0 |
||
136 | VENDOR_WD = 1 |
||
137 | VENDOR_NOVELL = 2 |
||
138 | VENDOR_3COM = 3 |
||
139 | |||
140 | NE_ASIC = 0x10 |
||
141 | NE_RESET = 0x0F ; Used to reset card |
||
142 | NE_DATA = 0x00 ; Used to read/write NIC mem |
||
143 | |||
144 | MEM_8k = 32 |
||
145 | MEM_16k = 64 |
||
146 | MEM_32k = 128 |
||
147 | |||
148 | ISA_MAX_ADDR = 0x400 |
||
149 | |||
150 | |||
151 | |||
5005 | hidnplayr | 152 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
153 | ;; ;; |
||
154 | ;; proc START ;; |
||
155 | ;; ;; |
||
156 | ;; (standard driver proc) ;; |
||
157 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
3545 | hidnplayr | 158 | |
5005 | hidnplayr | 159 | proc START c, reason:dword, cmdline:dword |
3545 | hidnplayr | 160 | |
5005 | hidnplayr | 161 | cmp [reason], DRV_ENTRY |
162 | jne .fail |
||
3545 | hidnplayr | 163 | |
5005 | hidnplayr | 164 | DEBUGF 2,"Loading driver\n" |
165 | invoke RegService, my_service, service_proc |
||
3545 | hidnplayr | 166 | ret |
5005 | hidnplayr | 167 | |
3545 | hidnplayr | 168 | .fail: |
169 | xor eax, eax |
||
170 | ret |
||
171 | |||
172 | endp |
||
173 | |||
174 | |||
5005 | hidnplayr | 175 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
176 | ;; ;; |
||
177 | ;; proc SERVICE_PROC ;; |
||
178 | ;; ;; |
||
179 | ;; (standard driver proc) ;; |
||
180 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
3545 | hidnplayr | 181 | |
182 | align 4 |
||
183 | proc service_proc stdcall, ioctl:dword |
||
184 | |||
185 | mov edx, [ioctl] |
||
4470 | hidnplayr | 186 | mov eax, [edx + IOCTL.io_code] |
3545 | hidnplayr | 187 | |
188 | ;------------------------------------------------------ |
||
189 | ;--------------- |
||
190 | cmp eax, 0 ;SRV_GETVERSION |
||
191 | jne @F ;--------------- |
||
192 | |||
4470 | hidnplayr | 193 | cmp [edx + IOCTL.out_size], 4 |
3545 | hidnplayr | 194 | jb .fail |
4470 | hidnplayr | 195 | mov eax, [edx + IOCTL.output] |
3545 | hidnplayr | 196 | mov [eax], dword API_VERSION |
197 | |||
198 | xor eax, eax |
||
199 | ret |
||
200 | |||
201 | ;------------------------------------------------------ |
||
202 | @@: ;--------- |
||
203 | cmp eax, 1 ;SRV_HOOK |
||
204 | jne @F ;--------- |
||
205 | |||
3856 | hidnplayr | 206 | DEBUGF 1, "Checking if device is already listed..\n" |
3545 | hidnplayr | 207 | |
4470 | hidnplayr | 208 | mov eax, [edx + IOCTL.input] |
3545 | hidnplayr | 209 | |
4470 | hidnplayr | 210 | cmp [edx + IOCTL.inp_size], 3 |
3545 | hidnplayr | 211 | jb .fail |
212 | cmp byte [eax], 1 |
||
213 | je .pci |
||
214 | |||
4470 | hidnplayr | 215 | cmp [edx + IOCTL.inp_size], 4 |
3545 | hidnplayr | 216 | jb .fail |
217 | cmp byte [eax], 0 |
||
218 | je .isa |
||
219 | |||
220 | jmp .fail |
||
221 | |||
222 | .pci: |
||
223 | |||
224 | ; check if the device is already listed |
||
225 | |||
226 | mov esi, device_list |
||
227 | mov ecx, [devices] |
||
228 | test ecx, ecx |
||
229 | jz .firstdevice_pci |
||
230 | |||
231 | mov ax, [eax+1] ; get the pci bus and device numbers |
||
232 | .nextdevice: |
||
233 | mov ebx, [esi] |
||
5005 | hidnplayr | 234 | cmp al, byte[ebx + device.pci_bus] |
3545 | hidnplayr | 235 | jne @f |
5005 | hidnplayr | 236 | cmp ah, byte[ebx + device.pci_dev] |
3545 | hidnplayr | 237 | je .find_devicenum ; Device is already loaded, let's find it's device number |
238 | @@: |
||
239 | add esi, 4 |
||
240 | loop .nextdevice |
||
241 | |||
242 | .firstdevice_pci: |
||
243 | call create_new_struct |
||
244 | |||
4470 | hidnplayr | 245 | mov eax, [edx + IOCTL.input] |
3545 | hidnplayr | 246 | movzx ecx, byte[eax+1] |
5005 | hidnplayr | 247 | mov [ebx + device.pci_bus], ecx |
3545 | hidnplayr | 248 | movzx ecx, byte[eax+2] |
5005 | hidnplayr | 249 | mov [ebx + device.pci_dev], ecx |
3545 | hidnplayr | 250 | |
251 | ; Now, it's time to find the base io addres of the PCI device |
||
252 | |||
5005 | hidnplayr | 253 | stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] |
254 | mov [ebx + device.io_addr], eax |
||
3545 | hidnplayr | 255 | |
256 | ; We've found the io address, find IRQ now |
||
257 | |||
5005 | hidnplayr | 258 | invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line |
259 | mov [ebx + device.irq_line], al |
||
3545 | hidnplayr | 260 | jmp .hook |
261 | |||
262 | .isa: |
||
263 | mov esi, device_list |
||
264 | mov ecx, [devices] |
||
265 | test ecx, ecx |
||
266 | jz .firstdevice_isa |
||
4974 | hidnplayr | 267 | movzx edi, word [eax+1] |
3545 | hidnplayr | 268 | mov al, [eax+3] |
269 | .nextdevice_isa: |
||
270 | mov ebx, [esi] |
||
5005 | hidnplayr | 271 | cmp edi, [ebx + device.io_addr] |
3545 | hidnplayr | 272 | jne .maybenext |
5005 | hidnplayr | 273 | cmp al, [ebx + device.irq_line] |
3545 | hidnplayr | 274 | je find_device_num |
275 | .maybenext: |
||
276 | add esi, 4 |
||
277 | loop .nextdevice_isa |
||
278 | |||
279 | |||
280 | |||
281 | .firstdevice_isa: |
||
282 | call create_new_struct |
||
283 | |||
4470 | hidnplayr | 284 | mov eax, [edx + IOCTL.input] |
4974 | hidnplayr | 285 | movzx ecx, word[eax+1] |
5005 | hidnplayr | 286 | mov [ebx + device.io_addr], ecx |
3545 | hidnplayr | 287 | mov cl, [eax+3] |
5005 | hidnplayr | 288 | mov [ebx + device.irq_line], cl |
3545 | hidnplayr | 289 | |
290 | .hook: |
||
5005 | hidnplayr | 291 | DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ |
292 | [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:8 |
||
3545 | hidnplayr | 293 | |
294 | call probe ; this function will output in eax |
||
295 | test eax, eax |
||
296 | jnz .err ; If an error occured, exit |
||
297 | |||
5005 | hidnplayr | 298 | DEBUGF 2,"Initialised OK\n" |
299 | |||
3545 | hidnplayr | 300 | mov eax, [devices] |
301 | mov [device_list+4*eax], ebx |
||
302 | inc [devices] |
||
303 | |||
5005 | hidnplayr | 304 | mov [ebx + device.type], NET_TYPE_ETH |
305 | invoke NetRegDev |
||
3545 | hidnplayr | 306 | |
307 | cmp eax, -1 |
||
308 | jz .err |
||
309 | ret |
||
310 | |||
311 | |||
312 | ; If the device was already loaded, find the device number and return it in eax |
||
313 | |||
314 | .find_devicenum: |
||
3856 | hidnplayr | 315 | DEBUGF 1, "Trying to find device number of already registered device\n" |
5005 | hidnplayr | 316 | invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
3545 | hidnplayr | 317 | ; into a device number in edi |
318 | mov eax, edi ; Application wants it in eax instead |
||
3856 | hidnplayr | 319 | DEBUGF 1, "Kernel says: %u\n", eax |
3545 | hidnplayr | 320 | ret |
321 | |||
322 | .err: |
||
3856 | hidnplayr | 323 | DEBUGF 2, "Failed, removing device structure\n" |
5005 | hidnplayr | 324 | invoke KernelFree, ebx |
3545 | hidnplayr | 325 | |
326 | jmp .fail |
||
327 | |||
328 | ;------------------------------------------------------ |
||
329 | @@: |
||
330 | .fail: |
||
331 | or eax, -1 |
||
332 | ret |
||
333 | |||
334 | ;------------------------------------------------------ |
||
335 | endp |
||
336 | |||
337 | |||
338 | create_new_struct: |
||
339 | |||
340 | cmp [devices], MAX_DEVICES |
||
341 | jae .fail |
||
342 | |||
5005 | hidnplayr | 343 | allocate_and_clear ebx, sizeof.device, .fail ; Allocate the buffer for device structure |
3545 | hidnplayr | 344 | |
5005 | hidnplayr | 345 | mov [ebx + device.reset], reset |
346 | mov [ebx + device.transmit], transmit |
||
347 | mov [ebx + device.unload], unload |
||
348 | mov [ebx + device.name], my_service |
||
3545 | hidnplayr | 349 | |
350 | ret |
||
351 | |||
352 | .fail: |
||
353 | add esp, 4 ; return to caller of 'hook' |
||
354 | or eax, -1 |
||
355 | ret |
||
356 | |||
357 | find_device_num: |
||
358 | |||
3856 | hidnplayr | 359 | DEBUGF 1, "Trying to find device number of already registered device\n" |
3545 | hidnplayr | 360 | mov ebx, eax |
5005 | hidnplayr | 361 | invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
362 | ; into a device number in edi |
||
363 | mov eax, edi ; Application wants it in eax instead |
||
3856 | hidnplayr | 364 | DEBUGF 1, "Kernel says: %u\n", eax |
3545 | hidnplayr | 365 | ret |
366 | |||
367 | |||
368 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
369 | ;; ;; |
||
370 | ;; Actual Hardware dependent code starts here ;; |
||
371 | ;; ;; |
||
372 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
373 | |||
374 | |||
375 | unload: ; TODO |
||
376 | or eax, -1 |
||
377 | ret |
||
378 | |||
379 | |||
380 | |||
381 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
382 | ;; |
||
383 | ;; probe: enables the device and clears the rx buffer |
||
384 | ;; |
||
385 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
386 | |||
387 | probe: |
||
5005 | hidnplayr | 388 | mov [ebx + device.vendor], VENDOR_NONE |
389 | mov [ebx + device.bmem], 0 |
||
3545 | hidnplayr | 390 | |
3856 | hidnplayr | 391 | DEBUGF 1, "Trying 16-bit mode\n" |
3545 | hidnplayr | 392 | |
5005 | hidnplayr | 393 | mov [ebx + device.flags], FLAG_16BIT + FLAG_PIO |
394 | mov [ebx + device.memsize], MEM_32k |
||
395 | mov [ebx + device.tx_start], 64 |
||
396 | mov [ebx + device.rx_start], TXBUF_SIZE + 64 |
||
3545 | hidnplayr | 397 | |
5005 | hidnplayr | 398 | set_io [ebx + device.io_addr], 0 |
399 | set_io [ebx + device.io_addr], P0_DCR |
||
3545 | hidnplayr | 400 | mov al, DCR_WTS + DCR_FT1 + DCR_LS ; word transfer select + |
401 | out dx, al |
||
402 | |||
5005 | hidnplayr | 403 | set_io [ebx + device.io_addr], P0_PSTART |
3545 | hidnplayr | 404 | mov al, MEM_16k |
405 | out dx, al |
||
406 | |||
5005 | hidnplayr | 407 | set_io [ebx + device.io_addr], P0_PSTOP |
3545 | hidnplayr | 408 | mov al, MEM_32k |
409 | out dx, al |
||
410 | |||
411 | mov esi, my_service |
||
412 | mov di, 16384 |
||
413 | mov cx, 14 |
||
414 | call PIO_write |
||
415 | |||
416 | mov si, 16384 |
||
417 | mov cx, 14 |
||
418 | sub esp, 16 |
||
419 | mov edi, esp |
||
420 | call PIO_read |
||
421 | |||
422 | mov esi, esp |
||
423 | add esp, 16 |
||
424 | mov edi, my_service |
||
425 | mov ecx, 13 |
||
426 | repe cmpsb |
||
427 | je ep_set_vendor |
||
428 | |||
3856 | hidnplayr | 429 | DEBUGF 1, "16-bit mode failed\n" |
430 | DEBUGF 1, "Trying 8-bit mode\n" |
||
3545 | hidnplayr | 431 | |
5005 | hidnplayr | 432 | mov [ebx + device.flags], FLAG_PIO |
433 | mov [ebx + device.memsize], MEM_16k |
||
434 | mov [ebx + device.tx_start], 32 |
||
435 | mov [ebx + device.rx_start], TXBUF_SIZE + 32 |
||
3545 | hidnplayr | 436 | |
5005 | hidnplayr | 437 | set_io [ebx + device.io_addr], NE_ASIC + NE_RESET |
3545 | hidnplayr | 438 | in al, dx |
439 | out dx, al |
||
440 | |||
441 | in al, 0x84 |
||
442 | |||
5005 | hidnplayr | 443 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 444 | mov al, CMD_RD2 + CMD_STP |
445 | out dx, al |
||
446 | |||
5005 | hidnplayr | 447 | set_io [ebx + device.io_addr], P0_RCR |
3545 | hidnplayr | 448 | mov al, RCR_MON |
449 | out dx, al |
||
450 | |||
5005 | hidnplayr | 451 | set_io [ebx + device.io_addr], P0_DCR |
3545 | hidnplayr | 452 | mov al, DCR_FT1 + DCR_LS |
453 | out dx, al |
||
454 | |||
5005 | hidnplayr | 455 | set_io [ebx + device.io_addr], P0_PSTART |
3545 | hidnplayr | 456 | mov al, MEM_8k |
457 | out dx, al |
||
458 | |||
5005 | hidnplayr | 459 | set_io [ebx + device.io_addr], P0_PSTOP |
3545 | hidnplayr | 460 | mov al, MEM_16k |
461 | out dx, al |
||
462 | |||
463 | mov esi, my_service |
||
464 | mov di, 8192 |
||
465 | mov cx, 14 |
||
466 | call PIO_write |
||
467 | |||
468 | mov si, 8192 |
||
469 | mov cx, 14 |
||
470 | sub esp, 16 |
||
471 | mov edi, esp |
||
472 | call PIO_read |
||
473 | |||
474 | mov esi, my_service |
||
475 | mov edi, esp |
||
476 | add esp, 16 |
||
477 | mov ecx, 13 |
||
478 | repe cmpsb |
||
479 | je ep_set_vendor |
||
480 | |||
3856 | hidnplayr | 481 | DEBUGF 2, "This is not a valid ne2000 device!\n" |
3545 | hidnplayr | 482 | or eax, -1 |
483 | ret |
||
484 | |||
485 | |||
486 | ep_set_vendor: |
||
487 | |||
3856 | hidnplayr | 488 | DEBUGF 1, "Mode ok\n" |
3545 | hidnplayr | 489 | |
5005 | hidnplayr | 490 | cmp [ebx + device.io_addr], ISA_MAX_ADDR |
3545 | hidnplayr | 491 | jbe .isa |
492 | |||
3856 | hidnplayr | 493 | DEBUGF 1, "Card is using PCI bus\n" |
3545 | hidnplayr | 494 | |
5005 | hidnplayr | 495 | mov [ebx + device.vendor], VENDOR_NOVELL ;;; FIXME |
3545 | hidnplayr | 496 | jmp ep_check_have_vendor |
497 | |||
498 | .isa: |
||
3856 | hidnplayr | 499 | DEBUGF 1, "Card is using ISA bus\n" |
3545 | hidnplayr | 500 | |
5005 | hidnplayr | 501 | mov [ebx + device.vendor], VENDOR_NOVELL |
3545 | hidnplayr | 502 | |
503 | ep_check_have_vendor: |
||
504 | |||
505 | |||
5005 | hidnplayr | 506 | mov al, [ebx + device.vendor] |
3545 | hidnplayr | 507 | cmp al, VENDOR_NONE |
508 | ; je exit |
||
509 | |||
510 | cmp al, VENDOR_3COM |
||
511 | je reset |
||
512 | |||
5005 | hidnplayr | 513 | mov eax, [ebx + device.bmem] |
514 | mov [ebx + device.rmem], eax |
||
3545 | hidnplayr | 515 | |
516 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
517 | ;; |
||
518 | ;; reset: Place the chip into a virgin state |
||
519 | ;; |
||
520 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
521 | |||
522 | reset: |
||
3856 | hidnplayr | 523 | DEBUGF 1, "Resetting device\n" |
3545 | hidnplayr | 524 | |
525 | ; attach int handler |
||
5005 | hidnplayr | 526 | movzx eax, [ebx + device.irq_line] |
3856 | hidnplayr | 527 | DEBUGF 1, "Attaching int handler to irq %x\n", eax:1 |
5005 | hidnplayr | 528 | invoke AttachIntHandler, eax, int_handler, ebx |
3856 | hidnplayr | 529 | test eax, eax |
530 | jnz @f |
||
531 | DEBUGF 2, "Could not attach int handler!\n" |
||
5005 | hidnplayr | 532 | or eax, -1 |
533 | ret |
||
3856 | hidnplayr | 534 | @@: |
3545 | hidnplayr | 535 | |
536 | ; Stop card + DMA |
||
5005 | hidnplayr | 537 | set_io [ebx + device.io_addr], 0 |
538 | ; set_io [ebx + device.io_addr], P0_COMMAND |
||
3545 | hidnplayr | 539 | mov al, CMD_PS0 + CMD_RDMA_ABORT + CMD_STP |
540 | out dx, al |
||
541 | |||
542 | ; initialize DCR |
||
5005 | hidnplayr | 543 | set_io [ebx + device.io_addr], P0_DCR |
3545 | hidnplayr | 544 | mov al, DCR_FT1 + DCR_LS |
5005 | hidnplayr | 545 | test [ebx + device.flags], FLAG_16BIT |
3545 | hidnplayr | 546 | jz @f |
547 | or al, DCR_WTS ; word transfer select |
||
548 | @@: |
||
549 | out dx, al |
||
550 | |||
551 | ; clear remote bytes count |
||
5005 | hidnplayr | 552 | set_io [ebx + device.io_addr], P0_RBCR0 |
3545 | hidnplayr | 553 | xor al, al |
554 | out dx, al |
||
555 | |||
5005 | hidnplayr | 556 | set_io [ebx + device.io_addr], P0_RBCR1 |
3545 | hidnplayr | 557 | out dx, al |
558 | |||
559 | ; initialize Receive configuration register (until all init is done) |
||
5005 | hidnplayr | 560 | set_io [ebx + device.io_addr], P0_RCR |
3545 | hidnplayr | 561 | mov al, 0x20 ; monitor mode |
562 | out dx, al |
||
563 | |||
564 | ; transmit configuration register to monitor mode (until all ini is done) |
||
5005 | hidnplayr | 565 | set_io [ebx + device.io_addr], P0_TCR |
3545 | hidnplayr | 566 | mov al, 2 ; internal loopback |
567 | out dx, al |
||
568 | |||
569 | ; clear interupt status |
||
5005 | hidnplayr | 570 | set_io [ebx + device.io_addr], P0_ISR |
3545 | hidnplayr | 571 | mov al, 0xff |
572 | out dx, al |
||
573 | |||
574 | ; clear IRQ mask ;;;;; CHECKME ;;;;; |
||
5005 | hidnplayr | 575 | set_io [ebx + device.io_addr], P0_IMR |
3545 | hidnplayr | 576 | xor al, al |
577 | out dx, al |
||
578 | |||
579 | ; set transmit pointer |
||
5005 | hidnplayr | 580 | set_io [ebx + device.io_addr], P0_TPSR |
581 | mov al, [ebx + device.tx_start] |
||
3545 | hidnplayr | 582 | out dx, al |
583 | |||
584 | ; set pagestart pointer |
||
5005 | hidnplayr | 585 | set_io [ebx + device.io_addr], P0_PSTART |
586 | mov al, [ebx + device.rx_start] |
||
3545 | hidnplayr | 587 | out dx, al |
588 | |||
589 | ; set pagestop pointer |
||
5005 | hidnplayr | 590 | set_io [ebx + device.io_addr], P0_PSTOP |
591 | mov al, [ebx + device.memsize] |
||
3545 | hidnplayr | 592 | out dx, al |
593 | |||
594 | ; set boundary pointer |
||
5005 | hidnplayr | 595 | set_io [ebx + device.io_addr], P0_BOUND |
596 | mov al, [ebx + device.memsize] |
||
3545 | hidnplayr | 597 | dec al |
598 | out dx, al |
||
599 | |||
600 | ; set curr pointer |
||
5005 | hidnplayr | 601 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 602 | mov al, CMD_PS1 ;+ CMD_RD2 + CMD_STP ; page 1, stop mode |
603 | out dx, al |
||
604 | |||
5005 | hidnplayr | 605 | set_io [ebx + device.io_addr], P1_CURR |
606 | mov al, [ebx + device.rx_start] |
||
3545 | hidnplayr | 607 | out dx, al |
608 | |||
5005 | hidnplayr | 609 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 610 | mov al, CMD_PS0 ;+ CMD_RD2 + CMD_STA ; go to page 0, start mode |
611 | out dx, al |
||
612 | |||
613 | ; Read MAC address and set it to registers |
||
614 | call read_mac |
||
615 | push .macret |
||
616 | sub esp, 6 |
||
5005 | hidnplayr | 617 | lea esi, [ebx + device.mac] |
3545 | hidnplayr | 618 | mov edi, esp |
619 | movsd |
||
620 | movsw |
||
621 | jmp write_mac |
||
622 | .macret: |
||
623 | |||
624 | ; set IRQ mask |
||
5005 | hidnplayr | 625 | set_io [ebx + device.io_addr], 0 |
626 | set_io [ebx + device.io_addr], P0_IMR |
||
3545 | hidnplayr | 627 | mov al, IRQ_MASK |
628 | out dx, al |
||
629 | |||
630 | ; start mode |
||
5005 | hidnplayr | 631 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 632 | mov al, CMD_STA |
633 | out dx, al |
||
634 | |||
635 | ; clear transmit control register |
||
5005 | hidnplayr | 636 | set_io [ebx + device.io_addr], P0_TCR |
3545 | hidnplayr | 637 | xor al, al ; no loopback |
638 | out dx, al |
||
639 | |||
640 | ; set receive control register ;;;; |
||
5005 | hidnplayr | 641 | set_io [ebx + device.io_addr], P0_RCR |
3545 | hidnplayr | 642 | mov al, 4 ; accept broadcast |
643 | out dx, al |
||
644 | |||
645 | ; clear packet/byte counters |
||
646 | xor eax, eax |
||
5005 | hidnplayr | 647 | lea edi, [ebx + device.bytes_tx] |
3545 | hidnplayr | 648 | mov ecx, 6 |
649 | rep stosd |
||
650 | |||
651 | ; Set the mtu, kernel will be able to send now |
||
5005 | hidnplayr | 652 | mov [ebx + device.mtu], ETH_FRAME_LEN |
3545 | hidnplayr | 653 | |
654 | ; Set link state to unknown |
||
5005 | hidnplayr | 655 | mov [ebx + device.state], ETH_LINK_UNKNOWN |
3545 | hidnplayr | 656 | |
657 | ; Indicate that we have successfully reset the card |
||
658 | xor eax, eax |
||
3856 | hidnplayr | 659 | DEBUGF 1, "Done!\n" |
3545 | hidnplayr | 660 | |
661 | ret |
||
662 | |||
663 | |||
664 | |||
665 | ;*************************************************************************** |
||
666 | ; Function |
||
667 | ; transmit |
||
5522 | hidnplayr | 668 | ; buffer in [esp+4], pointer to device struct in ebx |
3545 | hidnplayr | 669 | ;*************************************************************************** |
670 | |||
5522 | hidnplayr | 671 | proc transmit stdcall buffer_ptr |
3545 | hidnplayr | 672 | |
5005 | hidnplayr | 673 | pushf |
674 | cli |
||
675 | |||
676 | mov esi, [buffer_ptr] |
||
5522 | hidnplayr | 677 | mov ecx, [esi + NET_BUFF.length] |
678 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", esi, ecx |
||
679 | lea eax, [esi + NET_BUFF.data] |
||
3856 | hidnplayr | 680 | DEBUGF 1, "To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
3545 | hidnplayr | 681 | [esi+0]:2,[esi+1]:2,[esi+2]:2,[esi+3]:2,[esi+4]:2,[esi+5]:2,[esi+6]:2,[esi+7]:2,[esi+8]:2,[esi+9]:2,[esi+10]:2,[esi+11]:2,[esi+13]:2,[esi+12]:2 |
682 | |||
683 | cmp ecx, ETH_FRAME_LEN |
||
5005 | hidnplayr | 684 | ja .err ; packet is too long |
3545 | hidnplayr | 685 | cmp ecx, ETH_ZLEN |
5005 | hidnplayr | 686 | jb .err ; packet is too short |
3545 | hidnplayr | 687 | |
5005 | hidnplayr | 688 | movzx edi, [ebx + device.tx_start] |
3545 | hidnplayr | 689 | shl edi, 8 |
5522 | hidnplayr | 690 | add esi, [esi + NET_BUFF.offset] |
691 | push ecx |
||
3545 | hidnplayr | 692 | call PIO_write |
5522 | hidnplayr | 693 | pop ecx |
3545 | hidnplayr | 694 | |
5005 | hidnplayr | 695 | set_io [ebx + device.io_addr], 0 |
696 | ; set_io [ebx + device.io_addr], P0_COMMAND |
||
3545 | hidnplayr | 697 | mov al, CMD_PS0 + CMD_RD2 + CMD_STA |
698 | out dx, al |
||
699 | |||
5005 | hidnplayr | 700 | set_io [ebx + device.io_addr], P0_TPSR |
701 | mov al, [ebx + device.tx_start] |
||
3545 | hidnplayr | 702 | out dx, al |
703 | |||
5005 | hidnplayr | 704 | set_io [ebx + device.io_addr], P0_TBCR0 |
3545 | hidnplayr | 705 | mov al, cl |
706 | out dx, al |
||
707 | |||
5005 | hidnplayr | 708 | set_io [ebx + device.io_addr], P0_TBCR1 |
3545 | hidnplayr | 709 | mov al, ch |
710 | out dx, al |
||
711 | |||
5005 | hidnplayr | 712 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 713 | mov al, CMD_PS0 + CMD_TXP + CMD_RD2 + CMD_STA |
714 | out dx, al |
||
715 | |||
3856 | hidnplayr | 716 | DEBUGF 1, "Packet Sent!\n" |
3545 | hidnplayr | 717 | |
5005 | hidnplayr | 718 | inc [ebx + device.packets_tx] |
5522 | hidnplayr | 719 | add dword[ebx + device.bytes_tx], ecx |
5005 | hidnplayr | 720 | adc dword[ebx + device.bytes_tx + 4], 0 |
3545 | hidnplayr | 721 | |
5522 | hidnplayr | 722 | invoke NetFree, [buffer_ptr] |
5005 | hidnplayr | 723 | popf |
3545 | hidnplayr | 724 | xor eax, eax |
5005 | hidnplayr | 725 | ret |
3545 | hidnplayr | 726 | |
3619 | hidnplayr | 727 | .err: |
3856 | hidnplayr | 728 | DEBUGF 2, "Transmit error!\n" |
5522 | hidnplayr | 729 | invoke NetFree, [buffer_ptr] |
5005 | hidnplayr | 730 | popf |
3545 | hidnplayr | 731 | or eax, -1 |
5005 | hidnplayr | 732 | ret |
3545 | hidnplayr | 733 | |
5005 | hidnplayr | 734 | endp |
3545 | hidnplayr | 735 | |
736 | |||
5005 | hidnplayr | 737 | |
3545 | hidnplayr | 738 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
739 | ; |
||
740 | ; Interrupt handler |
||
741 | ; |
||
742 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
743 | |||
744 | align 4 |
||
745 | int_handler: |
||
746 | |||
747 | push ebx esi edi |
||
3856 | hidnplayr | 748 | DEBUGF 1, "INT\n" |
3545 | hidnplayr | 749 | |
750 | ; find pointer of device wich made INT occur |
||
751 | |||
752 | mov ecx, [devices] |
||
753 | test ecx, ecx |
||
754 | jz .nothing |
||
755 | mov esi, device_list |
||
756 | .nextdevice: |
||
757 | mov ebx, [esi] |
||
758 | |||
5005 | hidnplayr | 759 | set_io [ebx + device.io_addr], 0 |
760 | ; set_io [ebx + device.io_addr], P0_COMMAND |
||
3545 | hidnplayr | 761 | mov al, CMD_PS0 |
762 | out dx, al |
||
763 | |||
5005 | hidnplayr | 764 | set_io [ebx + device.io_addr], P0_ISR |
3545 | hidnplayr | 765 | in al, dx |
766 | test al, al |
||
767 | jnz .got_it |
||
768 | .continue: |
||
769 | add esi, 4 |
||
770 | dec ecx |
||
771 | jnz .nextdevice |
||
772 | .nothing: |
||
773 | pop edi esi ebx |
||
774 | xor eax, eax |
||
775 | |||
776 | ret |
||
777 | |||
778 | .got_it: |
||
3856 | hidnplayr | 779 | DEBUGF 1, "Device=%x status=%x\n", ebx, eax:2 |
3545 | hidnplayr | 780 | |
781 | push ebx |
||
5005 | hidnplayr | 782 | .rx_loop: |
3545 | hidnplayr | 783 | test al, ISR_PRX ; packet received ok ? |
784 | jz .no_rx |
||
5005 | hidnplayr | 785 | test [ebx + device.flags], FLAG_PIO |
3545 | hidnplayr | 786 | jz .no_rx ; FIXME: Only PIO mode supported for now |
787 | |||
5005 | hidnplayr | 788 | ; allocate a buffer |
5522 | hidnplayr | 789 | invoke NetAlloc, ETH_FRAME_LEN+NET_BUFF.data |
5005 | hidnplayr | 790 | test eax, eax |
791 | jz .rx_fail_2 |
||
3545 | hidnplayr | 792 | |
5005 | hidnplayr | 793 | ; Push return address and packet ptr to stack |
3545 | hidnplayr | 794 | pushd .no_rx |
795 | push eax |
||
5522 | hidnplayr | 796 | mov [eax + NET_BUFF.device], ebx |
797 | mov [eax + NET_BUFF.offset], NET_BUFF.data |
||
3545 | hidnplayr | 798 | |
799 | ; read offset for current packet from device |
||
5005 | hidnplayr | 800 | set_io [ebx + device.io_addr], 0 |
801 | set_io [ebx + device.io_addr], P0_BOUND ; boundary ptr is offset to next packet we need to read. |
||
3545 | hidnplayr | 802 | in al, dx |
803 | inc al |
||
5005 | hidnplayr | 804 | cmp al, [ebx + device.memsize] |
3545 | hidnplayr | 805 | jb @f |
5005 | hidnplayr | 806 | mov al, [ebx + device.rx_start] |
3545 | hidnplayr | 807 | @@: |
808 | mov ch, al |
||
809 | |||
5005 | hidnplayr | 810 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 811 | mov al, CMD_PS1 |
812 | out dx, al |
||
5005 | hidnplayr | 813 | set_io [ebx + device.io_addr], P1_CURR |
5522 | hidnplayr | 814 | in al, dx ; get current page in cl |
3545 | hidnplayr | 815 | mov cl, al |
816 | |||
5005 | hidnplayr | 817 | set_io [ebx + device.io_addr], P1_COMMAND |
3545 | hidnplayr | 818 | mov al, CMD_PS0 |
819 | out dx, al |
||
820 | |||
5005 | hidnplayr | 821 | cmp cl, [ebx + device.memsize] |
3545 | hidnplayr | 822 | jb @f |
5005 | hidnplayr | 823 | mov cl, [ebx + device.rx_start] |
3545 | hidnplayr | 824 | @@: |
825 | |||
826 | cmp cl, ch |
||
5005 | hidnplayr | 827 | je .rx_fail |
5522 | hidnplayr | 828 | movzx esi, ch ; we are using 256 byte pages |
829 | shl esi, 8 ; esi now holds the offset for current packet |
||
3545 | hidnplayr | 830 | |
5522 | hidnplayr | 831 | ; Write packet header to frame header size field |
832 | push ecx |
||
3545 | hidnplayr | 833 | mov edi, esp |
834 | mov cx, 4 |
||
835 | call PIO_read |
||
5005 | hidnplayr | 836 | mov ecx, [esp] |
3545 | hidnplayr | 837 | |
838 | ; check if packet is ok |
||
839 | test ecx, RSTAT_PRX |
||
5005 | hidnplayr | 840 | jz .rx_fail_3 |
3545 | hidnplayr | 841 | |
842 | ; calculate packet length in ecx |
||
843 | shr ecx, 16 |
||
5522 | hidnplayr | 844 | sub ecx, 4 ; CRC doesnt count as data byte |
845 | mov edi, [esp+4] |
||
846 | mov [edi + NET_BUFF.length], ecx |
||
3545 | hidnplayr | 847 | |
848 | ; check if packet size is ok |
||
849 | cmp ecx, ETH_ZLEN |
||
5005 | hidnplayr | 850 | jb .rx_fail_3 |
3545 | hidnplayr | 851 | cmp ecx, ETH_FRAME_LEN |
5005 | hidnplayr | 852 | ja .rx_fail_3 |
3545 | hidnplayr | 853 | |
854 | ; update stats |
||
3856 | hidnplayr | 855 | DEBUGF 1, "Received %u bytes\n", ecx |
5005 | hidnplayr | 856 | add dword[ebx + device.bytes_rx], ecx |
857 | adc dword[ebx + device.bytes_rx + 4], 0 |
||
858 | inc [ebx + device.packets_rx] |
||
3545 | hidnplayr | 859 | |
860 | ; update read and write pointers |
||
861 | add esi, 4 |
||
5522 | hidnplayr | 862 | add edi, NET_BUFF.data |
3545 | hidnplayr | 863 | |
864 | ; now check if we can read all data at once (if we cross the end boundary, we need to wrap back to the beginning) |
||
865 | xor eax, eax |
||
5005 | hidnplayr | 866 | mov ah, [ebx + device.memsize] |
3545 | hidnplayr | 867 | sub eax, esi |
868 | cmp ecx, eax ; eax = number of bytes till end of buffer, ecx = bytes we need to read |
||
869 | jbe .no_wrap |
||
870 | |||
871 | ; Read first part |
||
872 | sub ecx, eax |
||
873 | push ecx |
||
874 | mov ecx, eax |
||
875 | call PIO_read ; Read the data |
||
876 | |||
5005 | hidnplayr | 877 | ; update pointers for second read |
3545 | hidnplayr | 878 | add edi, ecx |
879 | pop ecx |
||
5005 | hidnplayr | 880 | movzx esi, [ebx + device.rx_start] |
3545 | hidnplayr | 881 | shl esi, 8 |
882 | |||
883 | ; now read second part (or only part) |
||
884 | .no_wrap: |
||
885 | call PIO_read ; Read the data |
||
886 | |||
887 | ; update boundary pointer |
||
888 | pop eax |
||
889 | mov al, ah |
||
5005 | hidnplayr | 890 | cmp al, [ebx + device.rx_start] |
3545 | hidnplayr | 891 | jne @f |
5005 | hidnplayr | 892 | mov al, [ebx + device.memsize] |
3545 | hidnplayr | 893 | @@: |
5005 | hidnplayr | 894 | set_io [ebx + device.io_addr], 0 |
895 | set_io [ebx + device.io_addr], P0_BOUND |
||
3545 | hidnplayr | 896 | dec al |
897 | out dx, al |
||
898 | |||
899 | ; now send the data to the kernel |
||
5522 | hidnplayr | 900 | jmp [EthInput] |
3545 | hidnplayr | 901 | |
5005 | hidnplayr | 902 | .rx_fail_3: |
3545 | hidnplayr | 903 | add esp, 4 |
5005 | hidnplayr | 904 | .rx_fail: |
905 | add esp, 12 |
||
906 | .rx_fail_2: |
||
907 | DEBUGF 2, "Error on receive\n" |
||
3545 | hidnplayr | 908 | .no_rx: |
909 | pop ebx |
||
3856 | hidnplayr | 910 | DEBUGF 1, "done\n" |
3545 | hidnplayr | 911 | |
5005 | hidnplayr | 912 | set_io [ebx + device.io_addr], 0 |
913 | set_io [ebx + device.io_addr], P0_ISR |
||
3545 | hidnplayr | 914 | mov al, 0xff |
915 | out dx, al |
||
916 | |||
917 | pop edi esi ebx |
||
918 | |||
919 | ret |
||
920 | |||
921 | |||
922 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
923 | ;; ;; |
||
924 | ;; Write MAC address ;; |
||
925 | ;; ;; |
||
926 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
927 | |||
928 | align 4 |
||
929 | write_mac: ; in: mac on stack (6 bytes) |
||
930 | |||
3856 | hidnplayr | 931 | DEBUGF 1, "Writing MAC\n" |
3545 | hidnplayr | 932 | |
5005 | hidnplayr | 933 | set_io [ebx + device.io_addr], 0 |
3545 | hidnplayr | 934 | mov al, CMD_PS1; + CMD_RD2 + CMD_STP |
935 | out dx, al |
||
936 | |||
5005 | hidnplayr | 937 | set_io [ebx + device.io_addr], P1_PAR0 |
3545 | hidnplayr | 938 | mov esi, esp |
939 | mov cx, 6 |
||
940 | @@: |
||
941 | lodsb |
||
942 | out dx, al |
||
943 | inc dx |
||
944 | loopw @r |
||
945 | |||
946 | add esp, 6 |
||
947 | |||
948 | ; Notice this procedure does not ret, but continues to read_mac instead. |
||
949 | |||
950 | ;;;;;;;;;;;;;;;;;;;;;; |
||
951 | ;; ;; |
||
952 | ;; Read MAC address ;; |
||
953 | ;; ;; |
||
954 | ;;;;;;;;;;;;;;;;;;;;;; |
||
955 | |||
956 | read_mac: |
||
957 | |||
3856 | hidnplayr | 958 | DEBUGF 1, "Reading MAC\n" |
3545 | hidnplayr | 959 | |
960 | xor esi, esi |
||
961 | mov cx, 16 |
||
962 | sub esp, 16 |
||
963 | mov edi, esp |
||
964 | call PIO_read |
||
965 | |||
966 | mov esi, esp |
||
967 | add esp, 16 |
||
5005 | hidnplayr | 968 | lea edi, [ebx + device.mac] |
3545 | hidnplayr | 969 | mov ecx, 6 |
970 | .loop: |
||
971 | movsb |
||
5005 | hidnplayr | 972 | test [ebx + device.flags], FLAG_16BIT |
3545 | hidnplayr | 973 | jz .8bit |
974 | inc esi |
||
975 | .8bit: |
||
976 | loop .loop |
||
3856 | hidnplayr | 977 | DEBUGF 1, "MAC=%x-%x-%x-%x-%x-%x\n",\ |
5005 | hidnplayr | 978 | [ebx + device.mac]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2 |
3545 | hidnplayr | 979 | |
980 | ret |
||
981 | |||
982 | |||
983 | ;*************************************************************************** |
||
984 | ; |
||
985 | ; PIO_read |
||
986 | ; |
||
987 | ; Description |
||
988 | ; Read a frame from the ethernet card via Programmed I/O |
||
989 | ; src in si |
||
990 | ; cnt in cx |
||
991 | ; dst in edi |
||
992 | ;*************************************************************************** |
||
993 | PIO_read: |
||
994 | |||
3856 | hidnplayr | 995 | DEBUGF 1, "PIO Read from %x to %x, %u bytes ", si, edi, cx |
3545 | hidnplayr | 996 | |
5005 | hidnplayr | 997 | ; stop DMA + start |
998 | set_io [ebx + device.io_addr], 0 |
||
999 | ; set_io [ebx + device.io_addr], P0_COMMAND |
||
3545 | hidnplayr | 1000 | mov al, CMD_RD2 + CMD_STA |
1001 | out dx, al |
||
1002 | |||
5005 | hidnplayr | 1003 | ; Request confirmation of end of DMA transfer |
1004 | set_io [ebx + device.io_addr], P0_ISR |
||
1005 | mov al, ISR_RDC |
||
1006 | out dx, al |
||
1007 | |||
3545 | hidnplayr | 1008 | ; set length of data we're interested in |
5005 | hidnplayr | 1009 | set_io [ebx + device.io_addr], P0_RBCR0 |
3545 | hidnplayr | 1010 | mov al, cl |
1011 | out dx, al |
||
5005 | hidnplayr | 1012 | set_io [ebx + device.io_addr], P0_RBCR1 |
3545 | hidnplayr | 1013 | mov al, ch |
1014 | out dx, al |
||
1015 | |||
1016 | ; set offset of what we want to read |
||
5005 | hidnplayr | 1017 | set_io [ebx + device.io_addr], P0_RSAR0 |
3545 | hidnplayr | 1018 | mov ax, si |
1019 | out dx, al |
||
5005 | hidnplayr | 1020 | set_io [ebx + device.io_addr], P0_RSAR1 |
3545 | hidnplayr | 1021 | shr ax, 8 |
1022 | out dx, al |
||
1023 | |||
1024 | ; start DMA read |
||
5005 | hidnplayr | 1025 | set_io [ebx + device.io_addr], P0_COMMAND |
3545 | hidnplayr | 1026 | mov al, CMD_RD0 + CMD_STA |
1027 | out dx, al |
||
1028 | |||
5005 | hidnplayr | 1029 | set_io [ebx + device.io_addr], NE_ASIC |
1030 | test [ebx + device.flags], FLAG_16BIT |
||
3545 | hidnplayr | 1031 | jz .8bits |
3856 | hidnplayr | 1032 | DEBUGF 1, "(16-bit mode)\n" |
3545 | hidnplayr | 1033 | shr cx, 1 ; note that if the number was odd, carry flag will be set |
1034 | pushf |
||
1035 | .16bits: |
||
1036 | in ax, dx |
||
1037 | stosw |
||
1038 | loopw .16bits |
||
1039 | popf |
||
5005 | hidnplayr | 1040 | jnc wait_dma_done |
1041 | in al, dx |
||
1042 | stosb |
||
1043 | jmp wait_dma_done |
||
3545 | hidnplayr | 1044 | |
1045 | .8bits: |
||
3856 | hidnplayr | 1046 | DEBUGF 1, "(8-bit mode)\n" |
3545 | hidnplayr | 1047 | .8bits_: |
1048 | in al, dx |
||
1049 | stosb |
||
1050 | loopw .8bits_ |
||
5005 | hidnplayr | 1051 | jmp wait_dma_done |
3545 | hidnplayr | 1052 | |
1053 | |||
1054 | |||
1055 | |||
1056 | ;*************************************************************************** |
||
1057 | ; |
||
1058 | ; PIO_write |
||
1059 | ; |
||
1060 | ; Description |
||
1061 | ; writes a frame to the ethernet card via Programmed I/O |
||
1062 | ; dst in di |
||
1063 | ; cnt in cx |
||
1064 | ; src in esi |
||
1065 | ;*************************************************************************** |
||
1066 | PIO_write: |
||
1067 | |||
3856 | hidnplayr | 1068 | DEBUGF 1, "Eth PIO Write from %x to %x, %u bytes ", esi, di, cx |
3545 | hidnplayr | 1069 | |
5005 | hidnplayr | 1070 | ; Stop DMA + start |
1071 | set_io [ebx + device.io_addr], 0 |
||
1072 | ; set_io [ebx + device.io_addr], P0_COMMAND |
||
3545 | hidnplayr | 1073 | mov al, CMD_RD2 + CMD_STA |
1074 | out dx, al |
||
1075 | |||
5005 | hidnplayr | 1076 | ; Request confirmation of end of DMA transfer |
1077 | set_io [ebx + device.io_addr], P0_ISR |
||
3545 | hidnplayr | 1078 | mov al, ISR_RDC |
1079 | out dx, al |
||
1080 | |||
5005 | hidnplayr | 1081 | ; Program number of bytes we want to write |
1082 | set_io [ebx + device.io_addr], P0_RBCR0 |
||
3545 | hidnplayr | 1083 | mov al, cl |
1084 | out dx, al |
||
5005 | hidnplayr | 1085 | set_io [ebx + device.io_addr], P0_RBCR1 |
3545 | hidnplayr | 1086 | mov al, ch |
1087 | out dx, al |
||
1088 | |||
5005 | hidnplayr | 1089 | ; Program where we want to write |
3545 | hidnplayr | 1090 | mov ax, di |
5005 | hidnplayr | 1091 | set_io [ebx + device.io_addr], P0_RSAR0 |
3545 | hidnplayr | 1092 | out dx, al |
1093 | shr ax, 8 |
||
5005 | hidnplayr | 1094 | set_io [ebx + device.io_addr], P0_RSAR1 |
3545 | hidnplayr | 1095 | out dx, al |
1096 | |||
5005 | hidnplayr | 1097 | ; Set the DMA to write |
1098 | set_io [ebx + device.io_addr], P0_COMMAND |
||
3545 | hidnplayr | 1099 | mov al, CMD_RD1 + CMD_STA |
1100 | out dx, al |
||
1101 | |||
5005 | hidnplayr | 1102 | set_io [ebx + device.io_addr], NE_ASIC |
1103 | test [ebx + device.flags], FLAG_16BIT |
||
3545 | hidnplayr | 1104 | jz .8_bit |
3856 | hidnplayr | 1105 | DEBUGF 1, "(16-bit mode)\n" |
3545 | hidnplayr | 1106 | shr cx, 1 ; note that if the number was odd, carry flag will be set |
1107 | pushf ; save the flags for later |
||
1108 | .16bit: |
||
1109 | lodsw |
||
1110 | out dx, ax |
||
1111 | loopw .16bit |
||
1112 | popf |
||
5005 | hidnplayr | 1113 | jnc wait_dma_done |
1114 | lodsb |
||
1115 | out dx, al |
||
1116 | jmp wait_dma_done |
||
3545 | hidnplayr | 1117 | |
1118 | .8_bit: |
||
3856 | hidnplayr | 1119 | DEBUGF 1, "(8-bit mode)\n" |
3545 | hidnplayr | 1120 | .8_bit_: |
1121 | lodsb |
||
1122 | out dx, al |
||
1123 | loopw .8_bit_ |
||
5005 | hidnplayr | 1124 | jmp wait_dma_done |
3545 | hidnplayr | 1125 | |
5005 | hidnplayr | 1126 | |
1127 | |||
1128 | wait_dma_done: |
||
1129 | |||
1130 | set_io [ebx + device.io_addr], 0 |
||
1131 | set_io [ebx + device.io_addr], P0_ISR |
||
1132 | .dmawait: |
||
1133 | in al, dx |
||
1134 | test al, ISR_RDC ; Remote DMA Complete |
||
1135 | jz .dmawait |
||
3545 | hidnplayr | 1136 | ; and al, not ISR_RDC |
1137 | ; out dx, al ; clear the bit |
||
1138 | |||
1139 | ret |
||
1140 | |||
1141 | |||
1142 | |||
5005 | hidnplayr | 1143 | ; End of code |
3545 | hidnplayr | 1144 | |
1145 | |||
5005 | hidnplayr | 1146 | data fixups |
1147 | end data |
||
3545 | hidnplayr | 1148 | |
5005 | hidnplayr | 1149 | include '../peimport.inc' |
3545 | hidnplayr | 1150 | |
5005 | hidnplayr | 1151 | my_service db 'RTL8029', 0 ; max 16 chars include zero |
3545 | hidnplayr | 1152 | |
5005 | hidnplayr | 1153 | ;sz_8029 db 'Realtek 8029', 0 |
1154 | ;sz_8019 db 'Realtek 8019', 0 |
||
1155 | ;sz_8019as db 'Realtek 8019AS', 0 |
||
1156 | ;sz_ne2k db 'ne2000', 0 |
||
1157 | ;sz_dp8390 db 'DP8390', 0 |
||
3545 | hidnplayr | 1158 | |
5005 | hidnplayr | 1159 | include_debug_strings ; All data wich FDO uses will be included here |
3545 | hidnplayr | 1160 | |
5005 | hidnplayr | 1161 | align 4 |
1162 | devices dd 0 |
||
1163 | device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling |
||
3545 | hidnplayr | 1164 |